USGS Science⌕ Search

SEARCH · USGS Science

Results for “Soil Dynamics and Earthquake Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,696 records · Page 94Linked to original sources
USGS2025

Observations of tear-drinking by lepidopterans on moose ( Alces alces americana ) in northeastern North America

Lepidoptera have long been known to feed on the tears of vertebrates as a presumed source of minerals or nutrients. While this unusual behavior has been observed in a variety of species, only a single previous record has been documented outside of the tropics. Here, we present the first documentation of moths visiting the eyes of a bull moose ( Alces americanus americanus ), captured via trail camera in Green Mountain National Forest, Vermont, United States. We discuss the biogeography of this behavior, how it may differ between tropical and temperate climates, and its potential impact on moose health.

Vermont↗
USGS2025

Lithium from magma to mine in an early Yellowstone hotspot caldera

Renewable energy technologies rely on the extraction of metals not historically in high demand, such as lithium (Li), for which ore deposit models are incompletely understood. One of the world’s largest Li deposits is hosted in lake sediments of the 16.4 Ma McDermitt caldera, which formed during the early stages of Yellowstone hotspot volcanism in the western United States. Eruptive and posteruptive mobility of Li are major challenges in elucidating deposit formation. Melt inclusions preserved in quartz crystals provide a means to assess pre-eruptive magmatic Li contents. Concentrations of Li determined by ion microprobe for melt inclusions in a McDermitt rhyolite lava are 400−1350 ppm, compared to 20−70 ppm Li in matrix rhyolite glasses. Synthesis with melt inclusion data for eight additional calderas demonstrates a recurrence of Li-rich rhyolitic magmas (200−2000 ppm Li) in the western part of the Yellowstone hotspot track. However, unlike the multicyclic caldera complexes with overlapping fault networks that may have compromised Li retention, the McDermitt caldera remained a closed hydrologic system throughout its evolution. Modeling indicates 100 km 3 of resurgent magma could yield 25−150 Mt Li in a magmatic fluid and supports accumulation of Li-rich magmatic fluid in a closed intracaldera lake, followed by evaporative concentration and sequestration of Li within clay minerals to generate the McDermitt deposit.

Idaho, Nevada, Oregon, Wyoming↗
USGS1976

Heat-flow data from southeastern Oregon

With the exception of values from two holes drilled within 2 km of Mickey Hot Springs, 17 new heat-flow values in southeastern Oregon are within or somewhat below the range one would normally expect in non-anomalous parts of the North American Cordillera. This is not surprising for a region in which most igneous rocks on the surface are 5 m.y. old or more. There is a suggestion of a thermal anomaly associated with the very young (late Pleistocene or Holocene) Diamond Craters lava field, and the thermal regime on both sides of Steens Mountain seems to be controlled, to some degree, by lateral and vertical movement of water.

Oregon↗
USGS2025

Re-Os geochronology of molybdenite by LA-ICP-MS/MS

Re-Os geochronology is a powerful tool to directly date sulphide mineralisation using phases such as molybdenite, pyrite and chalcopyrite. We present a snapshot of a method in development utilizing laser ablation inductively coupled-plasma ‘triple quad’ mass spectrometry (LA-ICP-MS/MS) for Re-Os geochronology of molybdenite. While traditional LA-(MC)-ICP-MS measurements are limited by the >90% isobaric interference correction of parent radioactive 187 Re on radiogenic daughter 187 Os, the MS/MS technology minimizes this correction through careful instrument tuning and use of a (CH 4 + H 2 + He) reaction gas mixture to mass shift 187 Os away from 187 Re. We demonstrate the potential of the MS/MS technique by presenting robust Re-Os dates for three different molybdenite samples ranging in age from ~28 to 1520 Ma.

Conference Paper↗
USGS2025

A model uncertainty quantification protocol for evaluating the value of observation data

The history-matching approach to parameter estimation with models enables a powerful offshoot analysis of data worth—using the uncertainty of a model forecast as a metric for the worth of data. Adding observation data will either have no impact on forecast uncertainty or will reduce it. Removing existing data will either have no impact on forecast uncertainty or will increase it. The history-matching framework makes it possible to perform this quantitative analysis leveraging the connections among observations, model parameters, and model forecasts. We show this behavior on a specific groundwater flow model of the Mississippi Alluvial Plain and show where the analysis can be informative for considering the potential design of an observation network based on existing or potential observations.

Scientific Investigations Report↗
USGS2024

Elastic stress coupling between supraglacial lakes

Supraglacial lakes have been observed to drain within hours of each other, leading to the hypothesis that stress transmission following one drainage may be sufficient to induce hydro-fracture-driven drainages of other nearby lakes. However, available observations characterizing drainage-induced stress perturbations have been insufficient to evaluate this hypothesis. Here, we use ice-sheet surface-displacement observations from a dense global positioning system array deployed in the Greenland Ice Sheet ablation zone to investigate elastic stress transmission between three neighboring supraglacial lake basins. We find that drainage of a central lake can place neighboring basins in either tensional or compressional stress relative to their hydro-fracture scarp orientations, either promoting or inhibiting hydro-fracture initiation beneath those lakes. For two lakes located within our array that drain close in time, we identify tensional surface stresses caused by ice-sheet uplift due to basal-cavity opening as the physical explanation for these lakes' temporally clustered hydro-fracture-driven drainages and frequent triggering behavior. However, lake-drainage-induced stresses in the up-flowline direction remain low beyond the margins of the drained lakes. This short stress-coupling length scale is consistent with idealized lake-drainage scenarios for a range of lake volumes and ice-sheet thicknesses. Thus, on elastic timescales, our observations and idealized-model results support a stress-transmission hypothesis for inducing hydro-fracture-driven drainage of lakes located within the region of basal cavity opening produced by the initial drainage, but refute this hypothesis for distal lakes.

JGR Earth Surface↗
USGS2024

Managing basin-scale carbon sequestration: A tragedy of the commons approach

The Tragedy of the Commons is a well studied problem in the literature of ecology, economics, and environmental policy which illustrates the deleterious consequences of managing common pool resources when individual and social incentives are misaligned. In this work, we apply a simple model of carbon sequestration in a deep saline aquifer by two neighboring geologic CO 2 storage (GCS) operators to begin investigating if a Tragedy of the Commons framework applies to GCS. Specifically, we consider the pressure space as a “commons” because the injection by each firm at its own well increases the downhole injection pressure at both wells. We assume that a firm will decrease its injection rate if the downhole pressure at its well exceeds a predefined maximum (i.e., exceeds the “pressure limit”). With this assumption in place, we find that the same injection flowrates are optimal for both wells, regardless of whether they are owned by the same firm or competing firms. This suggests that GCS may not be best represented by a pure Tragedy of the Commons framework under our initial assumptions. However, there could be economic incentives or contractual obligations that may result in either or both GCS operators being unwilling to reduce their injection rates. Thus, we conclude the conference paper with a discussion of future extensions of our approach that may demonstrate closer alignment with the Tragedy of the Commons, including explicit definitions of pore-space rights, firm uncertainty regarding the parameters of the Theis equation, and the potential role of unitization.

Conference Paper↗
USGS2026

Making many out of one: Synthetic geologic deformation model distributions for use in USGS NSHM25‐PRVI Puerto Rico-U.S. Virgin Island update

A key use‐case of geologic slip rates is within deformation models used in probabilistic seismic hazard analyses. Field‐derived geologic slip rates have formed the cornerstone of deformation models in such applications for decades. Recent advancements in seismic hazard analyses have expanded the use of faults for which geologic slip rates are not well constrained using categorical slip rate estimates. Because of these advancements, application of a geologic deformation model for use in 2025 U.S. Geological Survey National Seismic Hazard Model Puerto Rico‐U.S. Virgin Islands (NSHM25‐PRVI) proved challenging due to: (1) a lack of field‐based geologic slip rates, and (2) a lack of epistemic uncertainty distributions within a broad range of estimated slip rates. Preliminary versions of the NSHM25‐PRVI model sampled these slip rate bins in a coincident manner along preferred and extreme value branches, which yielded untenable correlations in mean hazard results. To minimize the influence of correlated uncertainties amid these challenges, we develop a synthetic epistemic uncertainty distribution for deformation rate on each crustal fault. Each fault has a weighting schema across four possible distribution shapes: uniform, normal, triangular favoring local minima, and triangular favoring local maxima. The synthetic distributions are then sampled several times for each logic tree branch. The results provide a more realistic distribution of rates across the study region as compared with using correlated extrema sampling. This exploration of our method in a small region like PRVI can pave the way for larger‐scale, more complicated applications (e.g., western United States).

Puerto Rico, US Virgin Islands↗
USGS2025

Rainfall thresholds for postfire debris-flow initiation vary with short-duration rainfall climatology

The size, frequency, and geographic scope of severe wildfires are expanding across the globe, including in the Western United States. Recently burned steeplands have an increased likelihood of debris flows, which pose hazards to downstream communities. The conditions for postfire debris-flow initiation are commonly expressed as rainfall intensity-duration thresholds, which can be estimated given sufficient observational history. However, the spread of wildfire across diverse climates poses a challenge for accurate threshold prediction in areas with limited observations. Studies of mass-movement processes in unburned areas indicate that thresholds vary with local climate, such that higher rainfall rates are required for initiation in climates characterized by frequent intense rainfall. Here, we use three independent methods to test whether initiation of postfire runoff-generated debris flows across the Western United States varies similarly with climate. Through the compilation of observed thresholds at various fires, analysis of the spatial density of observed debris flows, and quantification of feature importance at different spatial scales, we show that postfire debris-flow initiation thresholds vary systematically with short-duration rainfall-intensity climatology. The predictive power of climatological data sets that are readily available before a fire occurs offers a much-needed tool for hazard management in regions that are facing increased wildfire activity, have sparse observational history, and/or have limited resources for field-based hazard assessment. Furthermore, if the observed variation in thresholds reflects long-term adjustment of the landscape to local climate, rapid shifts in rainfall intensity related to climate change will likely induce spatially variable shifts in postfire debris-flow likelihood.

Arizona, California, Colorado, Nevada, New Mexico,↗
USGS2026

Distinguishing natural from mining-related metal sources by including streambank groundwater data in a stream mass loading study

Distinguishing stream metal loading caused by mine features from that caused by natural background sources remains challenging, yet this distinction is essential for making effective remedial decisions at many legacy mine sites. We combine a stream tracer injection and synoptic sampling study with data from shallow near-stream groundwater wells to estimate left-bank versus right-bank metal loading contributions at the 100-m spatial scale. The study was performed in the East Mancos River, a mountain headwater stream in Colorado, USA. The dominant source of elevated stream metal concentrations could be either groundwater infiltration through right-bank Doyle Mine waste piles or natural acid rock drainage from hydrothermally altered bedrock located mainly on the left bank. For the five metals of concern (Cu, Al, Zn, Cd, and Mn), we find that 15 % of the load contributed by diffuse groundwater inputs in the section potentially influenced by Doyle mine waste originates from the right bank. This right-bank potential mine contribution equates to only 3 % of the total watershed instream load for these metals. Furthermore, apparent 3 H/ 3 He groundwater ages in segments contributing most of the right-bank metal loading are sufficiently old (9–12 yr) to suggest that infiltration through the waste piles, located only 140–180 m from the stream, is unlikely. Estimated potential Doyle mine loading contributions can therefore be considered maximum values. Study results thus indicate that Doyle mine waste piles are a minor source of metal loading under low-flow conditions, and streambank groundwater data can provide valuable additional information in stream mass loading studies.

Colorado↗
USGS2026

Critical minerals memory match game

An educational information packet about the 2025 List of Critical Minerals, which includes a memory match game about select critical minerals and how they are used.

General Information Product↗
USGS2025

Mapping a Carrington storm

A map is presented of median 1-min-resolution peak geoelectric-field strength across the United States as would be induced by magnetic storms as intense as the 2 September 1859 Carrington storm. The map is constructed from two data sets: Magnetometer time series from 22 ground-based observatories recording 40 magnetic storms, and surface impedance tensors derived from magnetotelluric measurements acquired at 1616 survey sites across the contiguous United States. Carrington-class storm geoelectric fields are likely to be very strong in the United States East and Midwest; > 5.00 V/km at many places. In Virginia, strengths would likely range from 30.30 V/km, with a 68% confidence interval of [19.44,47.20] V/km, to as low as 0.05 [0.03,0.07] V/km. Comparison of model geopotentials with those measured on 30 long lines, indicates errors of about 18%. A Carrington-class storm would likely induce geoelectric fields with strengths 55% greater than for the 13–14 March 1989 storm.

contiguous United States↗
USGS2025

Formation of the Mount Weld rare earth deposit, Western Australia: Geochronology constraints

Constraining the age of protracted chemical weathering in stable cratonic areas that may form thick regoliths and the potential enrichment of various elements is challenging. Economic deposits of aluminium, iron, copper, nickel, cobalt, niobium, and rare earth elements (REEs) form in this manner. Determining the age of formation can provide key information for exploration of similar deposits as well as to better constrain paleoclimatic conditions. This study describes our effort to constrain the age of formation of the Mount Weld deposit, a world-class carbonatite-derived REE laterite deposit. We utilize multiple geochronological techniques on different minerals. The oldest dates, ranging from ca. 100 to 50 Ma, were from laser ablation ICPMS, Lu-Hf dating of churchite, a heavy REE phosphate mineral formed by mineral saturation in groundwater. Growth bands on individual minerals show a younging outwards. 40 Ar/ 39 Ar geochronology of cryptomelane, a potassium-bearing manganese oxide mineral, yielded ages ranging from ca. 40 to 26 Ma. Similarly, (U–Th)/He geochronology of goethite yielded ages from ca. 45 to 19 Ma.

Mount Weld deposit↗
USGS2023

WellSTIC: A cost-effective sensor for performing point dilution tests to measure groundwater velocity in shallow aquifers

Many individual measurement points are required to characterize groundwater velocity within an aquifer. Groundwater velocity is most commonly measured using a network of >5 cm diameter monitoring wells, which, if not already present at a site, are expensive and labor-intensive to install. Drive-point piezometers—simple, cost-effective wells that can be installed by hand—are a common tool for sampling groundwater in shallow, alluvial aquifers, but most groundwater velocity measurement techniques require equipment that is too large for these narrow (usually <2 cm inside diameter) piezometers. In this technical note, we introduce a low-cost sensor and well packer system (<$90 USD) for performing point dilution tests in narrow piezometers. Field data show that the magnitude of groundwater velocity measured with this technique agrees with velocities computed from natural gradient tracer tests. Additionally, with proper calibration, these sensors can be used to continuously monitor in-well specific conductance, either during inter-well tracer tests with saline tracers or for water quality monitoring. This system is a viable tool for rapid assessment of the magnitude of groundwater velocity in shallow aquifers.

Water Resources Research↗
USGS2024

Self-guided decision support groundwater modelling with Python

The GMDSI tutorial notebooks repository provides learners with a comprehensive set of tutorials for self-guided training on decision-support groundwater modelling using Python-based tools. Although targeted at groundwater modelling, they are based around model-agnostic tools and readily transferable to other environmental modelling workflows. The tutorials are divided into three parts. The first covers fundamental theoretical concepts. These are intended as background reading for reference on an as-needed basis. Tutorials in the second part introduce learners to some of the core concepts parameter estimation in a groundwater modelling context, as well as providing a gentle introduction to the PEST, PEST++ and pyEMU software. Lastly, the third part demonstrates how to implement highly-parameterized applied decision-support modelling workflows. The tutorials aim to provide examples of both “how to use” the software as well as “how to think” about using the software. A key advantage to using notebooks in this context is that the workflows described run the same code as practitioners would run on a large-scale real- world application. Using a small synthetic model facilitates rapid progression through the workflow.

Journal of Open Source Education↗
USGS2026

Effect of mineral deposit data on predictions from the three-part approach to quantitative mineral resource assessment—A study of 16 previous U.S. Geological Survey assessments

The three-part approach to quantitative mineral resource assessment requires information about the properties of undiscovered mineral deposits in an assessment area. These properties are unknown, so the properties of discovered mineral deposits of the same mineral deposit type are used instead. In the three-part approach, these discovered mineral deposits come from around the world, and their properties constitute the pooled data for that mineral deposit type. Alternatively, these discovered mineral deposits could come from the assessment area, and their properties constitute the tract data for that mineral deposit type. Tract data may be more representative of the undiscovered mineral deposits in the assessment area than the pooled data. The goal of this study was to determine whether resource predictions using pooled data are equivalent to resource predictions using tract data. To this end, 16 previous U.S Geological Survey assessments were studied. For each assessment, resources were predicted for one undiscovered mineral deposit in the assessment area. One set of predictions used pooled data, and another used tract data. The two sets of predictions were compared with an equivalence test, using the six assessment statistics that are commonly reported for mineral resource assessments. Practical equivalence is the condition that two corresponding assessment statistics are within a factor of 1.5 of one another. For each of 2 assessments, all 6 assessment statistics were practically equivalent. For both assessments, the assessment statistics from the pooled data, relative to the corresponding assessment statistics from the tract data, ranged from 1.30 times smaller to 1.03 times larger. For each of 14 assessments, 1 or more of the 6 assessment statistics were not practically equivalent. The assessment statistics from the pooled data, relative to the corresponding assessment statistics from the tract data, ranged from 26.6 times smaller to 5.53 times larger. The use of pooled data has been a standard procedure in the three-part approach since at least 1986. The 16 assessments in this study are not a representative sample of those prior assessments that used pooled data. So, it is inappropriate to use the study results to infer whether pooled data affected the resource predictions for those prior assessments.

Scientific Investigations Report↗
USGS2024

Rock sample photogrammetry

This step-by-step protocol describes the photogrammetry process used by the U.S. Geological Survey Spokane Imaging Lab (SPIMG) lab to create 3D models of geologic samples. Steps related to photographing small objects are applicable to photogrammetry in general, however, SPIMG-specific steps involving lab hardware and software may not be.

Protocols.io↗