USGS Science⌕ Search

SEARCH · USGS Science

Results for “Water-Resources Investigations Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,206 records · Page 50Linked to original sources
USGS2025

Dynamic feedbacks between river meandering and landsliding in northwestern Washington glacial terraces

Landsliding in river valleys poses unique risks for cascading hazards and can damage infrastructure and cause fatalities. In postglacial valleys, many landslides are posited to occur in relation to lateral river erosion, but the dynamics of fluvial-hillslope interactions are not well understood. Here, we investigate a section of the Nooksack River in western Washington State where the channel is flanked by landslide-prone glacial terraces similar to those that failed in the 2014 State Route 530 “Oso” landslide. We map 216 landslides through time across 17 aerial imagery data sets (1933–2022) and analyze them in relation to river meandering and curvature. We observe dynamic feedbacks between lateral river meandering and valley-adjacent landsliding. Terrace lateral retreat rates of up to 25 m/year owing to combined fluvial erosion and slope failure occur on pinned, outer meander bends immediately downstream from peaks in river curvature (>0.0075 1/m); these locations are predisposed to both shallow and deep-seated landslides. Deep-seated landslides extending 17%–32% of the active valley width into the floodplain can displace the river away from the floodplain margin and change the channel planform. River-displacing landslides relocate meanders up- or downstream, thereby conditioning the location of subsequent landslides. This conceptual model of coupled landslide-driven meander displacement and valley-adjacent landsliding is exemplified across western Washington river systems. The distance between up- and downstream valley-adjacent landsliding scales with valley width, meander wavelength, and terrace height. Our results can advance our understanding of the river-hillslope interface in landscape evolution and can be used to inform hazard management in river corridors.

Washington↗
USGS2026

Geochemical disequilibrium at the brittle-ductile transition

We investigate the microtextural, microchemical, and isotopic effects of late-stage ductile deformation in quartzite mylonites and kyanite–muscovite–quartz veins from the Raft River shear zone (Utah). Quartz microstructures record pervasive disequilibrium, expressed by unannealed features including undulatory extinction, deformation lamellae, and poorly defined fabrics, typical of waning deformation in shear zones. Microchemical disequilibrium is best preserved in kyanite quartzites, where CL-zoned kyanite records repeated fractures, overgrowth, and mineral precipitation, and in muscovite from muscovite-poor quartzite mylonites that shows minor-element zoning consistent with syn-deformational overgrowth on detrital cores. In contrast, muscovite from muscovite-rich kyanite quartzites exhibits minimal chemical zoning. These microchemical variations correlate with 40 Ar/ 39 Ar age systematics. Chemically zoned muscovite preserves variable single-step ages, including ∼150 Ma ages, reflecting retention of detrital cores. In contrast, syndeformational muscovite consistently yields Miocene ages, indicating recrystallization and new growth below argon closure temperatures that reset inherited isotopic signatures. Similar trends are observed in quartzite mylonites, where increasing quartz recrystallization and stronger crystallographic preferred orientations occur toward deeper structural levels. Together, these observations indicate increasing retrograde deformation and recrystallization with depth in the Raft River shear zone and demonstrate that strain-driven recrystallization exerts a first-order control on muscovite ages. We suggest that apparent thermochronologic gradients in retrograde shear zones may reflect recrystallization gradients rather than temperature gradients. Where cooling limits the thermal driving force for recrystallization, isotopic relics are preserved, and local deformation and fluid availability control re-equilibration. Consequently, isotopic disequilibrium—particularly in the 40 Ar/ 39 Ar system—may be the rule rather than the exception of retrograde tectonic environments.

Idaho, Utah↗
USGS2025

Latitudinal gradients of snow contamination in the Rocky Mountains associated with anthropogenic sources

Seasonal snow is an important source of drinking water and recreation, and for agriculture in the Rocky Mountain region. Monitoring snow-water quality can inform on the effects to the albedo and energy balance of the snowpack, and the sources of natural and anthropogenic aerosol and gases. This study analyzed metals in the seasonal snowpack from water year (WY) 2018 for 49 sites. Calcium, lanthanum, and cerium concentrations support the importance of mineral dust to the southern Rocky Mountains. Mercury (Hg), zinc (Zn), and cadmium (Cd) concentrations showed a similar spatial pattern to mineral dust, whereas antimony (Sb) concentrations were highest in the northern Rocky Mountains. To assess the relative contributions from dust versus anthropogenic contaminant sources, enrichment factors (EF) were calculated, with values above 10 indicating anthropogenic contamination. For Cd, Hg, Sb, and Zn, EF values exceeded 10 at northern sites. These observations were compared to spatial trends of EF values of Hg from WY2009 to WY2018, regional monitoring networks, and back trajectory analyses. The agreement between these datasets revealed temporally consistent contaminant sources and/or transport processes to the northern Rocky Mountains snowpack. Sources include current and historical mining and smelting in the region. Strategies to limit the emissions of these metals to the Northern Rockies could benefit from focusing on remediation of contaminated sites, and continued monitoring and mitigation of active mining and smelting.

Colorado , Idaho, Montana, New Mexico, Utah, Wyomi↗
USGS2025

Using subducting plate motion to constrain Cascadia slab geometry and interface strength

Subduction zones are home to multiple geohazards driven by the evolution of the regional tectonics, including earthquakes, volcanic eruptions and landslides. Past evolution builds the present-day structure of the margin, while the present-day configuration of the system determines the state-of-stress in which individual hazardous events manifest. Regional simulations of subduction zones provide a tool to synthesize the tectonic history of a region and investigate how geologic features lead to variations in the state of stress across the subduction system. However, it is challenging to design regional models that provide a force-balance that is consistent with the large-scale motion of surrounding tectonic plates while also not over-constraining the solution. Here, we present new models for the Cascadia subduction zone that meet these criteria and demonstrate how the motion of the subducting Juan de Fuca plate can be used to determine the along-strike variations in the viscous (long-term) coupling across the plate boundary. All successful models require lower viscous coupling in the northern section of the trench compared to the central and southern sections. However, due to uncertainties in the geometry of the Cascadia slab, we find that there is a trade-off between along-strike variation in viscous coupling and slab shape. Better constraints on the slab shape, and/or use of other observations are needed to resolve this trade-off. The approach presented here provides a framework for further exploring how geologic features in the overriding plate and the properties of the plate boundary region affect the state-of-stress across this and other subduction zones.

Cascadia subduction zone↗
USGS2024

Enhanced microplastic fragmentation along human built structures in an urban waterway

Plastic pollution and microplastic (MP, 1 µm to 5 mm) generation are growing problems affecting the global community and a wide range of natural and disturbed environments. Urban and suburban waterways are directly impacted by plastic pollution due to their proximity to population centers and many different types single use plastic waste sources. In this study, plastic waste accumulation and fragmentation was investigated along the Cooper River in Camden County, NJ. Polymer composition was identified for individual plastic waste particles collected along the Cooper River using Fourier transform infrared (FTIR) spectrometry. Multiple human-built structures (Wallworth Lake, Evans Pond and Hopkins Pond dams) along the Cooper River were found to accumulate different types of plastic waste. The accumulation of plastic waste along these structures resulted in the initial stages of plastic fragmentation and the identification of large MP particles (1 to 5 mm). Quantitative analysis revealed that fragmented polystyrene (PS) particles constituted 82.8% of the total plastic fragments identified, most of which were identified at the Wallworth Lake dam. Many other types of fragmented plastic litter, including polyethylene and polypropylene, were identified at the Wallworth Lake dam, as well. This research demonstrates that engineered structures within urban and suburban aquatic ecosystems serve as significant aggregators of plastic debris, thereby catalyzing its breakdown into microplastics. Considering the escalating ecological and human health ramifications of microplastic proliferation, the fragmentation of plastic waste in an urban and suburban waterway observed in this study can also result in potentially toxic smaller MP particles, and increased exposure to aquatic organisms and humans.

New Jersey↗
USGS2024

Site response in the Walnut Creek–Concord region of the San Francisco Bay, California: Ground motion amplification in a fault-bounded basin

Thirty‐seven portable accelerometers were deployed in the eastern San Francisco Bay communities of Walnut Creek and Concord to study site response in a fault‐bounded, urban, sedimentary basin. Local earthquakes were recorded for a period of two years from 2017 to 2019 resulting in 101 well‐recorded events. Site response is estimated by two methods: the reference site spectral ratio method and a source‐site spectral inversion method. The reference site spectral ratio method allows investigation of the variability of site amplification with source azimuth and frequency. The source‐site spectral inversion method yields the best least‐squares fit to site response for a database of ground‐motion records. Both methods show substantial amplification in the Walnut Creek–Concord basin below 2 Hz indicating strong surface‐wave development. Greater amplification is seen for sources aligned along the long axis of the basin. Inversion using close‐in sources at short distances yields lower amplification at longer periods than the entire data set due to reduced surface‐wave generation for steeper angles of incidence. Inversion of site response spectra for shallow shear‐wave velocity using a global search algorithm yields V S30 values consistent with generalized mapping results based on geology and topography but with greater variability due to local site variations. 3D finite‐element modeling shows greater amplification in the Walnut Creek–Concord basin with a basin‐edge effect likely contributing to higher ground motions. Topography is also seen to lead to increased scattering and shadowing effects.

California↗
USGS2024

Apatite and monazite geochemistry record magmatic and metasomatic processes in rare earth element mineralization at Mountain Pass, California

The largest rare earth element (REE) deposit in the United States is a carbonatite intrusion at Mountain Pass in the Mojave Desert, California. Despite a clear spatiotemporal association of alkaline silicate and carbonatite intrusions at Mountain Pass, a genetic model of their mutual formation has not been resolved. The Mountain Pass carbonatite has long been upheld as an example of a primary magmatic body, but recent work has suggested it could be fluid-derived. This study investigates the geochemistry of apatite and monazite grains from the alkaline silicate and carbonatite stocks and dikes of the Mountain Pass district, to elucidate the magmatic history of the intrusive suite and identify the role of fluids in rare earth element mineralization. Three apatite populations are identified in the alkaline silicate rocks. A primary magmatic apatite group supports intrusion of the stocks as separate pulses of magma derived from a spatially extensive metasomatized mantle source region. The second group implicates the role of a regional fluid that mobilized light rare earth elements from apatite grains. A minor group of inherited apatite cores, identified by low Sr and negative Eu anomalies, supports assimilation of crustal material in the formation of the intrusive suite. Analyses of monazite and apatite grains from the carbonatite orebody also reveal a mix of primary magmatic and metasomatic (fluid-related) minerals. Compositional similarities between primary phosphates in the carbonatite and alkaline silicate rocks support a genetic link between the intrusive suites. The presence of fluids regionally and within the carbonatite orebody indicates the Mountain Pass carbonatite should not be classified as a purely magmatic REE deposit.

Arizona, California, Nevada↗
USGS2025

The influence of postfire root strength decay on shallow landslide susceptibility in western Oregon

Severe wildfires can increase the potential for postfire landslides, partly due to the loss of vegetation and root reinforcement. This study investigates the multi-year dynamics of root strength following wildfire in coniferous forests of western Oregon and evaluates implications for postfire slope stability. Root tensile strength was measured through laboratory testing of 969 roots collected from 26 test pits over four postfire timeframes: unburned conditions, 4–12 months postfire (Cedar Creek, 2022), 24–35 months postfire (Holiday Farm, 2020), and 59–67 months postfire (Eagle Creek, 2017). Variables analyzed include root diameter, tensile thread strength, stiffness, progressive tensile strength with displacement, time-dependent strength and ductility, root area ratio, and cohesion. Results indicate a 50% reduction in root strength after wildfire, with the lowest values occurring around 4 years postfire. Projections indicate it could take 10–22 years following fire for root strength to recover to 70% and 90% of the prefire original root strength, respectively. This timeline indicates a multi-year window of vulnerability for shallow landslides that reaches a maximum approximately 4 years following fire. Brittle failure behavior was observed in burned root systems compared to unburned root systems, signaling a more abrupt loss of strength at yield. Simple slope stability analyses show that reduced root strength can lead to instability on more gentle slopes and under less saturation in comparison to unburned conditions. These findings highlight the critical role of root reinforcement in postfire slope stability and the long-term implications of wildfire disturbance on landslide susceptibility.

Oregon↗
USGS2025

Reduction of red bed sedimentary rocks in connection with energy metal ore formation: A case study from the Sinbad seep, Mesa County, Colorado

The Paradox Basin’s Sinbad seep is a modern analog for ancient bleaching of red bed sediments by introduced alkaline, reducing brines. This bleaching, involving reductive alteration of former red beds, is essential ground preparation that enables the altered rocks to trap Cu, U, and V from later oxidized fluids, forming ore deposits. Study of Sinbad thus offers insights into these metallic mineralization processes in the Paradox and other sedimentary basins. The Sinbad seep occurs where shallow groundwater interacts with organic-rich petroleum source rocks, flows up a fault, and discharges into Salt Creek. Ratios of Na/Cl, Na/Br, and Cl/Br, plus high sulfate concentrations, indicate that the salinity of the seep water originated from dissolution of halite and gypsum during topographically driven flow of meteoric water across a diapir of the Pennsylvanian Paradox Formation, rather than from deep basinal brines. In contact with the organic-rich shales of the Paradox, these SO 4 -rich waters become reduced through bacterial reduction, producing H 2 S. The waters react with red beds of the Permian Cutler Formation, causing pervasive bleaching. The bleaching at Sinbad is characterized by iron-conservative reduction of ferric iron in diagenetic hematite and detrital ilmenite and magnetite to Fe sulfides. The ferrous iron is retained in these sulfides likely as sorbed Fe. Associated alteration includes precipitation of quartz and feldspar overgrowths, partial dissolution of detrital quartz and feldspar caused by pressure solution, formation of clay and authigenic rutile, and precipitation of carbonate and gypsum. The Fe sulfides rapidly degenerate to a mixture of jarosite and iron oxides on weathering at the surface. Among the major-oxide elements and most trace elements, there is no statistical difference between unbleached and bleached samples. The exceptions are uranium and sulfur, which are somewhat greater in bleached samples. Fission track radiography illuminates that uranium is preferentially concentrated in iron oxide cements, iron sorbed into detrital clasts, and finely disseminated iron oxide in illite cement in bleached samples. A leaching experiment suggests that uranium may be more easily available for mobilization from rocks that have undergone bleaching alteration, making them potential U sources. In addition, bleached rocks form effective traps for U, V, and some Cu mineralization.

Colorado↗
USGS2025

Metal-rich lacustrine sediments from legacy mining perpetuate copper exposure to aquatic-riparian food webs

Historic copper mining left a legacy of metal-rich tailings resulting in ecological impacts along and within Torch Lake, an area of concern in the Keweenaw Peninsula, Michigan, USA. Given the toxicity of copper to invertebrates, this study assessed the influence of this legacy on present day nearshore aquatic and terrestrial ecosystems. We measured the metal (Co, Cu, Ni, Zn, Cd) and metalloid (As) concentrations in sediment, pore water, surface water, larval and adult insects, and two riparian spider taxa collected from Torch Lake and a nearby reference lake. Overall, elevated metal and metalloid concentrations, particularly Cu, were measured in all sediment samples and some surface and pore water samples collected from Torch Lake. For instance, Cu concentrations in the Torch Lake sediment were ∼200% higher than the reference lake and all measured concentrations exceeded predicted effects concentrations by at least ninefold. Within larval insect tissues, we observed 160% higher Cu concentrations than measured in the reference lake, and Cu was the only measured element above predicted effects concentrations in Torch Lake. Adult insects collected at both lakes had similar metal concentrations irrespective of exposure levels. Yet we found 100% higher copper concentrations in Torch Lake riparian spiders, demonstrating elevated exposure risk to insectivores across the aquatic-terrestrial boundary. Our results highlight that other metals in the mixture may not be as concerning to adjacent riparian ecosystems, but copper remains a contaminant of concern in Torch Lake 60 years after mining ceased.

Michigan↗
USGS2025

Concentration-discharge relations and transient metal loads reveal spatiotemporal variability in solute-generation mechanisms in a mine-affected watershed

Concentration-discharge (CQ) relations are commonly used to understand geochemical and hydrologic controls on the generation of solutes in watersheds. Despite the widespread application of CQ relations, this technique has been infrequently applied to acid mine drainage (AMD) sites, but the CQ framework may allow mechanistic understanding of remedial outcomes such as impoundment of water within underground mines. Results of CQ analyses and changes in metal loads in an AMD affected watershed in Colorado, USA indicate that dissolved loads increased at many individual locations following water impoundment within mine workings. Although increased loads were observed at most individual locations, these increases were offset by a large decrease in loading from the largest mine. A loading analysis that included data from an instream monitoring location showed a statistically significant decrease in Fe and Zn after bulkhead emplacement, indicating a net positive effect of bulkheads. Streams generally displayed dilution CQ patterns whereas mines and springs showed either flushing or chemostatic patterns prior to bulkheading, which transitioned to chemostatic patterns following bulkheading, indicating a transition from dynamic to equilibrium geochemical processes. Saturation indices for sulfide and secondary minerals indicated that mines and springs were near equilibrium for phases including schwertmannite, fluorite, and gypsum. Saturation indices vary through time for mines suggesting progressive leaching of sulfide minerals as the mass of available minerals in the mine workings decreases. Together, these diverse analyses provide an integrated understanding of the variability in solute generating processes in this watershed and may inform remediation plans for similarly affected sites by indicating the nature of mineralogic controls on water quality.

Colorado↗
USGS2025

Relationship between peak and cumulative ground motions from 49 Mw 3-6 earthquakes in the San Francisco Bay Area

We examine the relationship between peak ground velocity (PGV) and cumulative absolute displacement (CAD) for 49 M w 3 – 6 earthquakes in the San Francisco Bay Area (SFBA) and gain insight into the spatiotemporal partitioning of seismic energy in ground motion records with respect to source, path, and site effects. PGV and CAD are positively correlated, but there can be large deviations from the average trend. For example, ground motion records with either very long duration resonance or short pulse-like motions will have higher or lower CAD, respectively, but could have very similar PGV. We perform principal component analysis (PCA) on PGV-CAD for >7000 records in the SFBA with the goal of investigating what influences positive or negative anomalies in cumulative motions. PCA rotates the PGV-CAD datapoints into two principal components, where the one with the larger variance, which we call the “primary intensity” represents mostly the distance-dependence of ground motion amplitudes. The other principal component, which we call the “excess motion”, represents the deviation from cumulative motions that would be typical for a ground motion record with a given PGV. The excess motion will be positive in the case of records with long duration ringing and will be negative for short duration pulse-like ground motions. We find that excess motion is generally positive at sites in sedimentary basins and in soft sediments around the SF Bay. Excess motion is generally negative in the very near field, as well as at sites on hard bedrock. We discuss the findings here in terms of implications for seismic hazard applications and other wave propagation phenomena.

California↗
USGS2026

Assessment of extreme subsurface hydrologic conditions captured during atmospheric river storms in the San Francisco Bay area (California, USA) with applications to shallow landslide early warning

An increase in soil pore water pressure is the typical trigger for the majority of landslides caused by rainfall. Atmospheric river storms, common to the west coast of North America during the winter season, can deliver landslide triggering rainfall resulting in severe impacts to coastal communities. Using a network of hydrologic monitoring stations situated within landslide-prone terrain in the San Francisco Bay area of California (USA), we assess the meteorologic conditions and resulting hydrologic and landslide response resulting from eight consecutive storm events that caused thousands of shallow landslides during the winter of 2022–2023. We find disparate hydrological responses and resultant degrees of observed landsliding ranging from < 1 landslide/km2 to 18 landslides/km2 at the monitoring sites that reflect the interplay and differences between rainfall delivery, subsurface hydrological characteristics, and geotechnical properties at each site. Antecedent soil moisture from both early season rainfall and the first storm in the sequence played a critical role in setting up some hillslopes for failure. Subsequent storms then generated elevated pore water pressures for several hours with associated landsliding. However, we find that the occurrence of widespread landsliding required not only sufficient pore water pressure magnitude in susceptible hillslopes, but also full and prolonged effective soil saturation throughout hillslope profiles. Landslides may still occur at lower values and durations of effective saturation but are likely to be less extensive regionally. We present these findings within the context of research directions and improvements to landslide early warning systems first suggested by researchers 40 years ago.

California↗
USGS2025

A time-space model of graphite mineral systems

Increasing demand for graphite in energy storage systems warrants review of graphite ore genesis in a mineral systems framework. Orogenic graphite encompasses the metamorphic and orogenic mineral systems that produce flake graphite and hydrothermal vein (lump and chip) graphite deposits, respectively. A common feature of orogenic graphite deposits is an association with upper amphibolite- to granulite-facies metasedimentary rocks in continent-continent or continent-island arc collisional orogens. Orogenic flake graphite deposits form primarily through graphitization of organic carbon during regional metamorphism, but strain localization and partial melting of pelitic protoliths are likely important processes for graphite grade and quality enrichment. Orogenic vein graphite deposits precipitate from hydrothermal fluids, possibly derived from metamorphism or anatexis at depth. Decarbonation reactions in mixed calcareous-carbonaceous metasedimentary sequences are the most likely carbon sources for the veins. In contrast, intrusion-related graphite includes magmatic-hydrothermal and metamorphic mineral systems that form primarily in continental arc settings via the interaction of magmas with carbonaceous sedimentary packages. Magmatic-hydrothermal flake graphite deposits are hosted in plutonic and volcanic rocks, and result from the exsolution of CO 2 -CH 4 -rich fluids from melts contaminated by such packages. Contact metamorphism of carbonaceous sedimentary rocks by plutons produces some microcrystalline (amorphous) graphite deposits, including many in China. Compilation of geologic data from known graphite deposits globally suggests that pulses of carbon deposition in the Paleoproterozoic, Mesoproterozoic, and Neoproterozoic provided source carbon material. Subsequent supercontinent orogenesis at ca. 2,100 to 1,700 Ma (Columbia), ca. 1,300 to 1,000 Ma (Rodinia), and ca. 650 to 500 Ma (Gondwana) resulted in the genesis of orogenic flake and vein graphite deposits, where favorable geologic components overlapped with organic ± carbonate carbon-rich strata. Cryogenian deposition of graphite protoliths and Cryogenian – Cambrian metamorphic mineralization account for nearly 75% of all known resources globally and coincide with profound carbon isotope excursions and climate variability, implying a link with the global carbon budget. Comparatively few graphite deposits are associated with Pangea-forming orogens, attributed to less exhumation and/or denudation. High-temperature metasedimentary belts containing organic carbon-rich protoliths are most favorable for hosting orogenic flake graphite deposits, whereas sequences that also contain carbonate protoliths are favorable for orogenic graphite veins. Continent-scale orogenic belts may host both deposit types along with vanadium deposits. Use of a time-space mineral systems framework for graphite deposits can improve exploration models needed to ensure future supply of this critical mineral and provide insights into Earth’s long-term carbon cycle.

Mineralium Deposita↗
USGS2025

VIPER site analysis

We needed to evaluate available orbital data of NASA’s Volatiles Investigating Polar Exploration Rover (VIPER) mission area in order to derive a variety of maps to help the science team identify scientifically interesting places for the rover to visit and to provide scientific context for our mission. Some of these maps also fulfilled engineering and mission design needs to enable safe and efficient landing and roving. We incorporated data from the Lunar Reconnaissance Orbiter Camera, the Lunar Orbital Laser Altimeter, the Mini-RF instrument, the Chandrayaan-2 Orbital High Resolution Camera, the Korean Pathfinder Lunar Orbiter’s Shadowcam, the Kaguya Spectral Profiler and Multiband Imager, and the Chandrayaan-1 Moon Mineralogy Mapper. We used a variety of techniques to build these maps, including stereogrammetry, shape-from-shading, ice stability depth and surface temperature calculations, and the horizon method for solar illumination and direct-to-Earth communications maps. Altogether, these maps allowed us to survey for boulders, evaluate features in permanently shadowed regions that VIPER might explore, provide mineralogic context for what VIPER’s instruments may learn, estimate the ages and radar properties of craters in the VIPER mission area, and evaluate the potential for gravity traverses with the rover. These data and techniques provided a rich set of information from which both the VIPER science team and engineering teams were able to draw in order to plan a safe landing and to plan a VIPER surface mission that will be both scientifically valuable and robust from an operational perspective.

The Planetary Science Journal↗
USGS2025

The impact of burial diagenesis on soil-formed minerals in paleosols using stable isotopes of phyllosilicates and carbonate clumped isotopes

To understand the effects of burial diagenesis on the stable isotope geochemistry of soil-formed clay and carbonate minerals in paleosols, samples were collected from seven cores, spanning middle- to upper-Pennsylvanian strata of the Illinois Basin, with varied maximum burial depths of 1–3 km. Mixed-layer illite-smectite and kaolinite mixtures give δ 2 H and δ 18 O values of −83 ‰ to −36 ‰ and 11.9 ‰ to 21.1 ‰ (VSMOW), respectively. After carbonates were screened petrographically for diagenetic textures using transmitted light and cathodoluminescence, measured clumped isotope Δ 47 values range from 0.504 to 0.563 ‰ (I-CDES). Resulting mineral formation temperatures for phyllosilicate mineral mixtures are 28 to 66 °C (mean = 47 °C), whereas T(Δ 47 ) estimates for calcites are 36 to 61 °C (mean = 45 °C). Calculated δ 18 O water values from which phyllosilicate minerals and calcites precipitated under isotopic equilibrium ranges from −7.1 to −1.2 ‰ and − 1.4 to +4.9 ‰, respectively. Closed and open-system phyllosilicate-fluid exchange modeling indicates that phyllosilicate alteration occurred in the presence of a low temperature brine or meteoric water and is interpreted to occur in a layer-by-layer illitization transformation. Due to the lack of diagenetic textures and positively correlated T(Δ 47 ) and δ 18 O water , calcites are interpreted to have undergone solid-state bond reordering. Despite low to moderate temperatures (<125 °C) and varying depths of shallow burial (1–3 km), solid-state transformation of phyllosilicates and calcites indicates paleosols had prolonged exposure to burial conditions which has implications for the use of paleosol minerals for paleoenvironmental reconstructions.

Illinois, Indiana, Kentucky↗