USGS Science⌕ Search

USGS · sir20185135

The Connecticut Streamflow and Sustainable Water Use Estimator—A decision-support tool to estimate water availability at ungaged stream locations in Connecticut

Abstract

Freshwater streams in Connecticut are subject to many competing demands, including public water supply; agricultural, commercial, and industrial water use; and ecosystem and habitat needs. In recent years, drought has further stressed Connecticut’s water resources. To sustainably allocate and manage water resources among these competing uses, Federal, State, and local water-resource managers require data and modeling tools to estimate the water availability at a variety of temporal and spatial scales for planning purposes. The Connecticut Streamflow and Sustainable Water Use Estimator (CT SSWUE), developed by the U.S. Geological Survey in cooperation with the Connecticut Department of Energy and Environmental Protection, is a decision-support tool for estimating daily unaltered streamflow and sustainable water use at ungaged sites in Connecticut. The CT SSWUE estimates unaltered daily mean streamflow and water-use-adjusted streamflow for the period from October 1, 1960, to September 30, 2015, and the monthly sustainable net withdrawal at ungaged sites in Connecticut. Unaltered streamflow is the estimated daily mean streamflow in a drainage basin in the absence of any water withdrawals or wastewater discharges and with minimal human development. Sustainable net withdrawal is the maximum net withdrawal (withdrawal minus wastewater discharges) that can be drawn from a basin without critically depleting the water available through natural streamflow patterns. Sustainable net withdrawal is defined for this study as the difference between the unaltered daily mean streamflow and a user-defined target minimum streamflow. Weighted least squares and Tobit regression techniques were used to develop equations for estimating streamflow at ungaged sites at 19 streamflow quantiles with exceedance probabilities ranging from 0.005 to 99.995 percent. Regressions were based on streamflow quantiles and basin characteristics from 36 reference streamgages in and around Connecticut. Four basin characteristics—drainage area, mean of the soil permeability, mean of the average annual precipitation, and ratio of the length of streams that overlay sand and gravel deposits to the total length of streams in the basin—are used as explanatory variables in the equations. At an ungaged site, interpolation between the streamflow quantiles estimated from the regression equations produces a continuous flow-duration curve. A time series of daily mean streamflow at an ungaged site is then estimated by assuming that for each day, the streamflow quantile occurs on the same date at both a reference streamgage and the ungaged site. In a remove-one cross validation, estimated unaltered daily mean streamflow agreed well with observed values at reference streamgages, with a few exceptions. Nash Sutcliffe efficiency ranged from −0.43 to 0.97 with a median value of 0.88. The normalized root-mean-square error ranged from 16.6 to 120.4 percent with a median value of 34.5 percent. An empirical method for estimating 95-percent prediction intervals for unaltered daily and monthly mean streamflow was developed and tested by using the cross-validation data. Prediction intervals for unaltered daily mean streamflow at the cross-validation reference streamgages performed well in most cases. Gaged streamflow values from the cross-validation data fell within the prediction intervals a median 96.6 percent of the time for daily mean time series and 93.9 percent of the time for monthly mean time series. The CT SSWUE computes water-use-adjusted streamflow using spatially referenced water-use information provided by the Connecticut Department of Energy and Environmental Protection. Available water-use information included permitted and registered water withdrawals and permitted wastewater discharges during 1998 to 2015 for the Thames River Basin and central coastal drainage basins. Water-use information was incorporated into the U.S. Geological Survey StreamStats web application for Connecticut and can be used for computing water-use-adjusted streamflow and sustainable net withdrawal at selected points of interest. Altered daily streamflow is computed by applying average daily withdrawals and wastewater discharges to the water balance equation. Average daily surface water withdrawals and wastewater discharges are applied directly to the daily water balance equation. Time-lagged alterations on streamflow from groundwater withdrawals or wastewater discharges are estimated by using a response-coefficient method developed from results of previously published, calibrated groundwater models.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 40.985171° to 42.050587° latitude; -73.727775° to -71.786994° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Sara B. Levin, Scott A. Olson, Martha G. Nielsen, Gregory E. Granato. 2018-12-13. The Connecticut Streamflow and Sustainable Water Use Estimator—A decision-support tool to estimate water availability at ungaged stream locations in Connecticut. https://doi.org/10.3133/sir20185135

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Baseline water-quality inventory and summary for the Paterson Great Falls National Historical Park, New Jersey

The Paterson Great Falls National Historical Park (PAGR), established in 2011 in the City of Paterson, New Jersey, contains many cultural, historical, and natural resources. Because of the PAGR’s young age and limited resources, a long record of natural resource data is not available for use to guide future park management and planning decisions. A detailed natural resource inventory was identified as an immediate need in the “Foundation Document—Paterson Great Falls National Historical Park,” given the history of extensive industrial activity throughout the PAGR and the Passaic River Basin. The U.S. Geological Survey, in cooperation with the National Park Service and the Urban Waters Federal Partnership for the Lower Passaic River, inventoried water-quality monitoring efforts and compiled historical water-quality data from secondary data sources to define baseline conditions in the PAGR and the surrounding study area. This report documents the methods used to harmonize water-quality data aggregated from multiple sources for the PAGR study area. Procedures implemented during data harmonization include compiling data from multiple sources, assessing the dataset for completeness, addressing metadata concerns, and creating a consistent and quality-assured dataset for future analysis. The harmonized dataset contains 14 aggregated surface-water sites, 1,103 individual sampling days, and 32,000 water-quality records throughout the period of record defined for this study (1952–2021). Summary statistics and comparison to water-quality criteria are provided for focus parameters that can support PAGR management, including field properties, suspended material, total dissolved solids, specific conductance, chloride, sulfate, Escherichia coli, nutrients, contaminants of concern related to fish consumption advisories, and litter and floatable debris. A spatial data gap was identified for the recreational area near the base of the Great Falls and immediately downstream from a known combined sewer overflow discharge location. Analytic data gaps were identified for continuous streamflow and water-quality parameters, floatable debris characterization, and harmful algal blooms identification. Continuous collection of contaminants of concern was identified as a temporal data gap, as these parameters were not consistently collected within the study area. The water-quality data synthesis and summary presented in this report can assist PAGR staff in understanding the complex baseline water resources within the study area and can serve as a baseline to design future water-quality monitoring efforts and evaluate changes in water quality over time. The harmonized dataset, as well as future New Jersey Department of Environmental Protection and New Jersey Harbor Discharge Group monitoring data and assessments, can also be used to examine the status and trends in surface-water quality, support compliance with the Clean Water Act (33 U.S.C. 1251 et seq.), and further investigate changes to park water resources that can affect ecological and human health.

New Jersey↗

Slip tendency and dilation tendency of Quaternary faults in the Great Basin region, Arizona, California, Idaho, Nevada, Oregon, Utah, and Wyoming

This report presents the results of slip tendency and dilation tendency analysis of Quaternary faults in the Great Basin region, in the states of Arizona, California, Idaho, Nevada, Oregon, Utah, and Wyoming. This effort was undertaken as part of two studies: the U.S. Department of Energy Geothermal Technologies Office-funded Innovative Geothermal Exploration through Novel Investigations of Undiscovered Systems (INGENIOUS) project, which is a multidisciplinary, multi-institution effort to develop new methodologies and best practices to accelerate the discovery of new, commercially viable hydrothermal resources; and the U.S. Geological Survey Geothermal Resources Investigations Project. The goal of this work is to identify faults and fault segments that are appropriately oriented to be stress-loaded for slip or to dilate under the ambient stress conditions. Both conditions may make such faults more likely to host permeability and fluid flow relative to other faults in the region. Slip tendency and dilation tendency were calculated for all fault segments in the study area from the U.S. Geological Survey Quaternary Fault and Fold Database. Results demonstrate that faults with high slip tendency and dilation tendency are common in the Great Basin region. The areas containing many high slip tendency and dilation tendency fault segments are associated with high strain rates. These areas also host a relatively high proportion of the known hydrothermal systems. This indicates that faults with high slip tendency and dilation tendency in areas with high strain-rate are potentially most prospective for hosting hydrothermal systems. The database published in coordination with this report contains the slip tendency and dilation tendency results data, including the fault geometry and stress data used to calculate these quantities, for both the Great Basin study area and the smaller INGENIOUS study area.

Arizona, California, Idaho, Nevada, Oregon, Utah, ↗

A spatial analysis of the groundwater emergence flood hazard in Long Island, New York, and coastal areas surrounding Long Island Sound in New York, Connecticut, and Rhode Island

Long Island, New York, and nearby coastal areas surrounding Long Island Sound are densely populated and, like other coastal areas, are susceptible to flooding from several potential sources, including stormwater from precipitation events, tidal flooding and storm surge, and groundwater emergence flooding. Groundwater emergence fooding refers to the intersection of a rising water table with land surface or critical infrastructure. Many studies of flood drivers either neglect or only briefly discuss how shallow groundwater conditions may contribute to or exacerbate flood conditions. As a part of a comprehensive study of compound flood hazards in the coastal areas of Long Island and Long Island Sound, a spatial analysis was completed by the U.S. Geological Survey, in cooperation with the Environmental Protection Agency’s Long Island Sound Partnership, formerly called the Long Island Sound Study, using available regional datasets to characterize the potential hazard for groundwater emergence flooding. The approximately 3,100 square mile study area was subdivided into 11,407 grid cells that were 900 meters by 900 meters (approximately 3,000 feet by 3,000 feet), for the purpose of integrating the spatial datasets to calculate and map the groundwater emergence flood hazard. The depth to the water table, hydrologic soil groups, and National Land Cover Database were harmonized to the common grid. A groundwater emergence flood hazard score was calculated for each grid cell for current average conditions following a set of rules accounting for the depth to the water table and the percentage of area within each cell with slow infiltrating soils. A scenario with a higher sea-level position was also calculated for the Long Island part of the study area. The calculated groundwater emergence flood hazard score was reviewed in conjunction with the National Land Cover Database to identify developed areas and associated infrastructure that may be at risk of potential groundwater emergence flooding. Study results indicate that the groundwater emergence flood hazard is highest in coastal areas and near surface water where the water table is close to ground surface. Inland areas away from surface waterbodies are not likely to be exposed to groundwater emergence flooding. For Long Island, in the scenario with higher sea-level position, a greater groundwater emergence flood hazard is calculated for some locations closer to the coast and where land is submerged. Away from the coast and surface-water drainage, the groundwater emergence flood hazard is similar between the current average sea-level condition and the higher sea-level position scenario.

Connecticut, New York, Rhode Island↗