USGS Science⌕ Search

SEARCH · USGS Science

Search USGS Science

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,748 records · Page 37Linked to original sources
USGS2025

Factors affecting the distribution of water-bearing fractures in the bedrock aquifers of West Virginia

Bedrock aquifers cover 23,601 square miles within the State of West Virginia and comprise 97.4 percent of the surficial area within the State; the remaining 2.6 percent (621 square miles) consists of alluvial sand-and-gravel and glacial outwash aquifers bordering the State’s major rivers. While West Virginia’s alluvial aquifers have been studied extensively, bedrock aquifers have only been characterized for studies completed in a few areas in Jefferson, McDowell, and Monroe Counties. Bedrock aquifers are water supplies for public supply, agriculture, industry, and residential homeowner use. In this study, the U.S. Geological Survey, in cooperation with the West Virginia Department of Environmental Protection Division of Water and Waste Management, provides a statewide assessment of the occurrence and distribution of fractures within bedrock aquifers of the State and the various topographic, physiographic, and lithologic influences controlling the occurrence and distribution of bedrock fractures. The results of this study provide an increased understanding of the distribution of fractures in bedrock aquifers in West Virginia and help to verify trends that have been suspected for many years but were never well documented or verified by data. The results confirmed that the density of fractures and those that were determined to be water bearing decrease significantly with depth. A statistically significant difference in the density of fractures was observed at a depth of 215 feet for wells in the Appalachian Plateaus Physiographic Province’s and in the Valley and Ridge Physiographic Province’s aquifers; a higher density of fractures and water-bearing fractures were above a depth of 215 feet than below that depth. This is an important consideration when drilling wells for residential, commercial, industrial, or agricultural water supply. Abandoned underground coal mines are commonly believed to form large pools of water in the interconnected mine entries in abandoned room and pillar coal mines. Such pools of water can and do exist in abandoned underground coal mines, but many mines lack open entries and are held up by overburden strata and pillars that can collapse and form aquifers comprised of vast interconnected rubble zones (gob), especially in older mines. Data assessed for this study showed that shale-corrected values of effective porosity for limestone aquifers in West Virginia had a median value of 2 percent and an average value of 4 percent and generally are mineralized with low effective porosity. Argillaceous or sandy limestone has a median shale-corrected porosity of 4 percent and an average shale-corrected porosity of 5 percent. The median and average shale-corrected porosity of sandstone aquifers was estimated to be 14 percent, but the median shale-corrected porosity for argillaceous or calcareous sandstone was 5 percent and the average shale-corrected porosity for argillaceous or calcareous sandstone was 6 percent. Even though shale has a relatively high total sonic porosity compared to other lithologies, shale and siltstone had relatively low shale-corrected porosity, ranging from 0 to 2 percent. Well yields were previously documented to be highest in valley settings, lowest on hilltops, and intermediate on hillsides. Transmissivity data provided by this study confirm this general pattern within the Appalachian Plateaus Province; however, the Valley and Ridge Province does not follow this pattern. While still lowest on hilltop settings, the highest well yields were in hillside settings. The trend for the Valley and Ridge Province was likely skewed because of 9 high-yield wells specifically targeting deeper thin limestone units, such as the Tonoloway and Helderberg Limestones, at depths with transmissivity in excess of 2,000 feet squared per day in Mineral County, West Virginia, or targeting karst aquifers in Berkeley, Jefferson, or Greenbrier Counties, West Virginia. Finally, water-bearing fractures have been hypothesized to comprise a small number of all fractures within a typical bedrock well in West Virginia. Data collected for this study support this theory. A total of 3,403 fractures were identified during this study; 3,151 (92.6 percent) of those fractures are low-transmissive, and only 252 (7.4 percent) fractures are water-bearing. Even though a well may contain many fractures, less than 8 percent are considered water-bearing fractures.

West Virginia↗
USGS2025

Hydrologic variability and groundwater age of springs in eastern Oregon and northern Nevada, USA

The ecological importance of springs in semiarid regions is far greater than their small size and sparse distribution, yet little is known about the hydrologic functioning of these systems. During 2016–22, 261 springs were visited in the volcanic terrane of eastern Oregon and northern Nevada. When conditions were suitable, measurements of discharge, water temperature, and specific conductance were made, and samples for the analysis of carbon-14, tritium, and water stable isotopes (WSI) were collected. A subset of 60 springs was revisited during different seasons in the same year and during the dry season in multiple years to evaluate variability in discharge, chemistry, and groundwater age. Specific conductance and WSI varied considerably among springs across the study area but were unexpectedly stable across seasons and years at individual springs. Seasonal and interannual variability in spring discharge was related to the residence time of the discharging groundwater. Springs discharging older groundwater (10 3 –10 4 years) had significantly less variability in their discharge compared to springs discharging younger groundwater (10 0 –10 1 years). Variability among springs discharging younger groundwater included cessation of late-summer discharge at 18 % of the repeat-visit springs. A logistic regression model predicted the age of discharging spring water with 89 % accuracy using only the spring latitude, longitude, elevation, and δ 2 H value. This study framework provides a simple, inexpensive, and robust method to provisionally assess the hydrologic behavior of springs having little or no prior information in understudied, semiarid regions across the globe.

Nevada, Oregon↗
USGS2025

Long-term dynamics of earthquake swarms in the Yellowstone caldera

The factors controlling the spatial distribution and temporal evolution of earthquake swarms in volcanic systems remain unclear. We leverage leading-edge deep learning algorithms and a detailed three-dimensional velocity model to construct a 15-year high-resolution earthquake catalog of the Yellowstone caldera region. More than half of the region’s earthquakes are clustered into swarm-like families characterized by episodes of hypocenter expansion and migration. Adjacent earthquake swarms, separated by long quiescent periods, are found to be a dominant feature. We suggest that these swarms are controlled by the interplay between slowly diffusing aqueous fluids and rapid episodic fluid injections, which may result from the breaking of permeability seals. Our analyses also indicate that clustered seismicity beneath the caldera occurs on relatively immature, rougher fault structures, compared to more planar faults outside. Our results provide additional context for understanding seismicity in hydrothermal systems, highlighting the key role played by long-term fluid diffusion processes in driving the occurrence of earthquake swarms.

Idaho, Montana, Wyoming↗
USGS2025

Hydrogeologic framework and conceptual model of the Red River alluvial aquifer east of Lake Texoma, southeastern Oklahoma, 1980–2022

The 1973 Oklahoma Groundwater Law (Oklahoma Statutes §82-1020.5) requires that the Oklahoma Water Resources Board conduct hydrologic investigations of the State’s groundwater basins to support a determination of the maximum annual yield for each groundwater basin. At present (2025), the Oklahoma Water Resources Board has not established a maximum annual yield for the Red River alluvial aquifer east of Lake Texoma. To support the evaluation and determination of a maximum annual yield, a hydrogeologic framework and conceptual groundwater-flow model were developed to assess groundwater availability in the Red River alluvial aquifer east of Lake Texoma. The scope of this hydrologic investigation is the alluvium and terrace containing the Red River alluvial aquifer in Oklahoma between Lake Texoma, the Texas State line, and the Arkansas State line, an extent referred to in this report as “the eastern part of the Red River alluvial aquifer.” Parts of the alluvium and terrace extent in Arkansas and Texas are included in some analyses to address hydrologic influences from outside the aquifer’s boundaries in Oklahoma. The eastern part of the Red River alluvial aquifer in southeastern Oklahoma consists of approximately 401,280 acres of Quaternary alluvium and terrace deposits associated with the Red River and its major tributaries. Mean annual recharge to the aquifer for the 1980–2022 study period was estimated to be 8.62 inches per year, or 17.98 percent of the mean annual precipitation over the same period (47.94 inches). This mean annual recharge rate is equivalent to an inflow of approximately 288,250 acre-feet per year for the eastern part of the Red River alluvial aquifer. Recharge estimated using the Soil-Water-Balance code accounts for 98.7 percent of the conceptual-model inflows to the eastern part of the Red River alluvial aquifer. Saturated-zone evapotranspiration accounts for 11.9 percent and net streambed seepage accounts for 87.4 percent of the outflows in the conceptual model.

Arkansas, Oklahoma, Texas↗
USGS2025

Grand Canyon landslide-dam and paleolake triggered by the Meteor Crater impact at 56 ka

This paper hypothesizes that the Meteor Crater impact in Arizona, USA, 56,000 years ago triggered landslides in Grand Canyon that dammed the Colorado River and formed Nankoweap paleolake. This is compatible with shock and earthquake physics for the impact that infer a M5.4 seismic event, attenuated to an effective magnitude of M3.5 at Grand Canyon. Results that support the hypothesis include radiocarbon dating of driftwood and luminescence dating of associated slack-water lake sediments that are preserved in caves up to 60 m above the modern Colorado River. Radiocarbon ages from two locations, including Stanton’s Cave, date the driftwood as 55.25 ± 2.44 ka (n = 4). Sediments associated with the driftwood gave a luminescence age of 56.00 ± 6.39 ka (n = 2). These six Grand Canyon dates, and three published ages for the Meteor Crater impact, show statistically indistinguishable results that support the hypothesis for a geologically instantaneous series of events with a mean age of 55.60 ± 1.30 ka. This work highlights the value of radiocarbon dating near the limits of the technique, integration of multiple dating methods, and seismic and landslide hazards associated with meteorite impacts in regions of extreme topography like Grand Canyon.

Arizona↗
USGS2025

‘The fish that stop’: Drivers of historical decline for Pacific cod and implications for modern management in an era of rapidly changing climate

n the Gulf of Alaska, a series of marine heat waves depleted Pacific cod ( Gadus macrocephalus ) biomass to the lowest abundance ever recorded and led to the fishery’s closure in 2020. Although the fishery has been productive for decades, this collapse may have historical precedents. Traditional knowledge holders refer to cod as ‘the fish that stop’, and there is a suggested period of decline in the 1930s. Here we conduct a catch reconstruction of the early commercial fishery (1864–1950), confirming a rapid catch decline in the 1920s and 1930s. Next, we evaluate evidence for possible drivers. We document changes to demand and technology that contributed to declining catch. However, we also find both qualitative and quantitative evidence of depletion, suggesting catch declines were not driven entirely by social factors. Overfishing may have contributed to localized catch declines as evidenced by declining catch rates in heavily fished localities. We also find evidence for climate as a driver of regional decline, with the period of catch decline characterized by up to 2°C higher temperatures as compared to the earlier period of high fisheries production. Our analysis underscores the importance of understanding long-term drivers of fisheries productivity and the value of linking fisheries and climate histories.

Alaska↗
USGS2025

New constraints on location and timing of the Great Lakes tectonic zone, central Upper Peninsula, Michigan, USA

The Great Lakes tectonic zone (GLTZ) forms the boundary between the Wawa–Abitibi and Minnesota River Valley subprovinces within the Archean Superior Province. The GLTZ is concealed for all of its 1100 km length, except for a segment in the central Upper Peninsula of Michigan. There, it is exposed as a northwest-striking mylonite zone along a 11 km segment, extending to the onlap of Paleozoic rocks to the east. Farther east, its location has been unknown. Here, we use aeromagnetic and gravity data to develop interpretations of the expression of the GLTZ and to define its extent under cover. Aeromagnetic gradients over the mylonite zone are interpreted to be produced by structurally juxtaposed rocks with varying magnetizations. Gravity data show a regional gradient along the GLTZ, produced by the juxtaposition of a dense greenstone belt on the north against lower-density gneisses and granites on the south. The GLTZ is interpreted to extend ∼55 km under cover to the east. The GLTZ is terminated on the east by the buried eastern arm of the ca. 1100 Ma Midcontinent Rift. An undeformed granitic dike that cuts the mylonitic foliation produces a U–Pb apatite age of 2523 ± 33 Ma, implying no major post-Archean shearing occurred, and is at odds with previous interpretations of major Proterozoic reactivation. A granite intrusion in the Minnesota River Valley subprovince produces a Pb–Pb zircon age of 2606.9 ± 3.6/7.4 Ma. This suggests that magmatism related to the Sacred Heart orogeny, previously known in Minnesota, extended to Michigan.

Michigan↗
USGS2025

Methodology for compilation of previously published contour data showing the altitude of the base of Dakota Sandstone on the Colorado Plateau, Arizona, Colorado, New Mexico, and Utah

Structure contours and other geologic information from numerous published geologic maps were digitized and compiled into a digital dataset showing the configuration of a single stratigraphic datum, the base of the Dakota Sandstone and its equivalents across the Colorado Plateau. The principal maps compiled in digital form are a series of 1:250,000-scale 1 degree (°) × 2° quadrangle maps published by the U.S. Geological Survey, augmented by other geologic maps published at various map scales. The compiled digital dataset contains geologic map polygons of the Dakota Sandstone and regional stratigraphic equivalents, the location of faults and fold axes, structure contour lines that define the altitude of the base of the unit and bedding orientation data computed from the structure contour lines. This report provides the scientific rationale for compilation of these data and describes the compilation methodology for each of the data elements. This report provides an extended description of the data compilation in a companion U.S. Geological Survey digital data release of spatial data and attributes associated with the contoured surface and associated geologic data layers.

Arizona, Colorado, New Mexico, Utah↗
USGS2025

Determination of per- and polyfluoroalkyl substances in water by direct injection of matrix-modified centrifuge supernatant and liquid chromatography/tandem mass spectrometry with isotope dilution

A direct-injection liquid chromatography/tandem mass spectrometry method was developed to determine 34 per- and polyfluoroalkyl substances (PFAS), including selected branched isomers, in centrifuge supernatant of matrix-modified (amended with approximately 50 percent methanol) water samples. The method has been validated in reagent water, surface water, groundwater, and wastewater effluent. Other water types (for example, drinking water, untreated wastewater, and landfill leachate) have been analyzed by the method but not systematically validated. Recovery of isotope-dilution standards, added to each sample, may be used to assess method performance in nonvalidated matrices on a sample-by-sample basis. Using this method, PFAS concentrations were determined in the range of 2–2,000 nanograms per liter in water samples. This range can be extended by diluting concentrated samples. At circumneutral pH, most compounds are present in the environment in their ionized form, and data are reported as such (for example, perfluorooctanoic acid is referred to as “perfluorooctanoate” [PFOA], perfluorooctane sulfonic acid is referred to as “perfluorooctane sulfonate” [PFOS]). Sample preparation procedures were designed without the use of filtration and with minimum sample handling steps to mitigate procedural losses of target compounds due to sorption to surfaces. Further, isotope-dilution quantification allowed for the correction of bias that may result from procedural losses, matrix-induced signal suppression or enhancement, and other factors. Validation experiments to characterize bias and variability, method detection level, and holding time were done in four distinct water matrices—reagent water, surface water, treated wastewater effluent, and groundwater—at multiple concentration levels. Mean PFAS recoveries met data quality objectives of bias and variability studies in all four validation matrices except for two compounds with low and variable recovery in the reagent water matrix only. Isotope-dilution standards, treated as surrogate compounds, were analyzed in more than 1,500 customer-submitted environmental samples with aggregate recovery of 102.5±6.5 percent (mean±standard deviation). Maximum holding times for all target compounds in the four validation matrices were 28 days for refrigerated samples and 90 days for frozen samples.

Techniques and Methods↗
USGS2025

Evidence for fluid pressurization of fault zones and persistent sensitivity to injection rate beneath the Raton Basin

Subsurface wastewater injection has increased the seismicity rate within the Raton Basin over more than two decades, with the basin-wide injection rate peaked between 2009-2015. To understand the evolution of injection-induced earthquakes, we systematically analyzed 2016-2024 broadband recordings with a machine-learning-based phase picker and constructed a catalog with 95,993 earthquakes (-1≤ M L ≤4.3). We then inverted for full centroid moment tensors (CMT) for 90 M L ≥ 2 events, with a special interest in constraining the non-double-couple components via probabilistic metrics. Both relocations and CMT solutions support basement-rooted normal faults, including graben and half-graben structures. Furthermore, we observe the non-double-couple components that imply elevated pore pressure in the fault zones. An earthquake cluster emerged in the north-central basin in 2023, preceded by ~1-yr of increased injection volume from wells within 15km. Despite a basin-wide decrease in the injection volume, we highlights the persistence of seismicity that remains to sensitive to injection rates within the Raton Basin.

Colorado, New Mexico↗
USGS2025

Land application of drill waste: A scope analysis

Drilling fluid waste land application, a process where drilling wastes are spread and tilled into the land surface, has become common in some petroleum-producing states, however, the potential benefits and risks of this practice are not well studied. Drilling fluids can be water- or oil-based and can have high concentrations of total soluble salts and total petroleum hydrocarbons. Comprehensive chemical characterization of these fluids is not well documented in the literature, and the extent of land application is largely unknown. We hypothesized that the land application of drill waste would fluctuate over time due to economic factors. To begin to understand the extent of historical and potential future land application, we analyzed data from over 5,800 drilling fluid land application permits collected by the Oklahoma Corporation Commission for years 2000, 2005, 2010, and 2015–2020. During the years studied, drilling fluid wastes were applied to more than 250,000 acres in Oklahoma, with over 54,000 thousand barrels (Mbbl) of liquids and nearly 21,000 Mbbl of solids applied. Land application is widespread (occurring in 59/77 counties), however recent drilling activity, land availability, and the economics of transportation have created conditions favorable for land application specifically in the Anadarko Basin. Land application can co-occur with sensitive areas, such as important groundwater and surface-water drinking sources and agricultural fields used for subsistence or feed crop production. Our approach for quantifying the extent of land application, along with further chemical characterization studies, can aid operators and land managers who are considering this practice in assessing the associated benefits and risks.

Oklahoma↗
USGS2025

The systematics of stable hydrogen (δ2H) and oxygen (δ18O) isotopes and tritium (3H) in the hydrothermal system of the Yellowstone Plateau volcanic field, USA

To improve our understanding of hydrothermal activity on the Yellowstone Plateau volcanic field, we collected and analyzed a large data set of δ 2 H, δ 18 O, and the 3 H concentrations of circum-neutral and alkaline waters. We find that (a) hot springs are fed by recharge throughout the volcanic plateau, likely focused through fractured, permeable tuff units. Previous work had stressed the need for light δ 2 H water recharge restricted to the northern part of the plateau or recharge during past cold periods. However, new data from the Y-7 drill hole suggests that recharge is not restricted to a certain area or a cold period. (b) δ 18 O values of thermal waters in the geyser basins are shifted from the global meteoric water line by temperature-dependent water-rock reactions with higher subsurface temperatures resulting in a greater shift. (c) Large temporal variations in the isotopic composition of meteoric water recharge and small temporal variability in the isotopic composition of hot spring discharge implies that the volume of groundwater in, and around the Yellowstone caldera is substantially larger than the volume of annual water recharge. (d) Hot springs discharged through different rhyolitic units correlate with identifiable differences in δ 2 H and δ 18 O compositions, 3 H concentrations, and water chemistry that imply equilibration at different temperatures and travel along different flow paths. (e) Based on measured 3 H concentrations, we calculate that hot spring waters in the central part of the geyser basins mostly contain <2% post-1950 meteoric water, whereas waters discharged at the basin margins contain larger fractions of post-1950s meteoric water.

Wyoming↗
USGS2025

Assessment of water chemistry of the Coconino aquifer in northeastern Arizona

The Coconino aquifer was investigated as a potential groundwater resource for the Hopi Tribe and Navajo Nation in northeastern Arizona. Basic groundwater chemistry, including major ions, total dissolved solids, and selected trace metal concentrations, are presented and analyzed to characterize the Coconino aquifer. The geochemical compositions of groundwater are associated with changes in geology and groundwater movement and are compared to drinking-water standards to determine suitable areas for potential groundwater resource development. Dissolved-solids concentrations in much of the Coconino aquifer water were higher than the U.S. Environmental Protection Agency’s secondary drinking-water standard of 500 milligrams per liter (mg/L) due to a buried halite body in the southeastern part of the study area. However, trace metal concentrations were generally low. Groundwater may need to be treated for high dissolved-solids concentrations before it is suitable for use as a resource for the Hopi Tribe and Navajo Nation.

Arizona↗
USGS2025

Completion summary for monitor wells NRF-17 and NRF-18 at the Naval Reactors Facility, Idaho National Laboratory, Idaho

The U.S. Geological Survey (USGS)—in cooperation with the U.S. Department of Energy (DOE) for the Naval Reactors Laboratory Field Office that supports operations for the Naval Reactors Facility (NRF) located at the Idaho National Laboratory (INL)—drilled and constructed well NRF-17 (formerly borehole USGS 151) and well NRF-18 (formerly borehole USGS 152) for stratigraphic framework analyses and water-quality monitoring at the Idaho National Laboratory (INL) near the NRF, in southeastern Idaho. Borehole USGS 151 was continuously cored from about 48 to 1,070 feet (ft) below land surface (BLS); rotary drilled from approximately 1,070 to 1,720 ft BLS; and re-drilled to complete construction as a monitor well NRF-17, completed to 461 ft BLS. Borehole USGS 152 was continuously cored from approximately 19 to 1,259 ft BLS; rotary drilled from approximately 1,259 to 1,630 ft BLS; and re-drilled to complete construction as a monitor well NRF-18, completed to 450 ft BLS. Geophysical data were examined with photographed core material to record lithologic descriptions and to suggest zones where groundwater flow was anticipated. Basalt flows varied from highly fractured to dense, with high-to-low vesiculation. Well NRF-17 generally was constructed in mostly dense basalt (greater than 75 percent), and well NRF-18 was constructed in primarily fractured and (or) vesicular basalt. In well NRF-17, the well capacity is directly affected by the limited amount of fractured basalt, which serves as the primary pathway for groundwater. This effect was observed during the pumping test conducted after the well's final construction. Single-well aquifer tests were done at wells NRF-17 and NRF-18 to provide estimates of transmissivity and hydraulic conductivity after final well construction and initial well development. Estimated values of transmissivity and hydraulic conductivity for well NRF-17 were 8.81 feet squared per day (ft 2 /d) and 1.04×10 -2 feet per day (ft/d), respectively. Estimated values of transmissivity and hydraulic conductivity for well NRF-18 were 4.77×10 3 ft 2 /d and 5.61 ft/d, respectively. The NRF-17 pump test resulted in 19.41 ft of measured drawdown at a sustained average pumping rate of 3.3 gallons per minute (gal/min). The NRF-18 pump test resulted in 0.55 ft of measured drawdown at a sustained average pumping rate of 31.0 gal/min. Water-quality samples collected from the two wells were analyzed for cations, anions, metals, nutrients, volatile organic compounds, stable isotopes, and radionuclides. Water samples for select inorganic constituents showed concentrations consistent with signatures from tributary valley groundwater with influences from ephemeral surface-water recharge from the Big Lost River. Water-quality samples analyzed for stable isotopes of oxygen and hydrogen are consistent with signatures from tributary valley groundwater and surface-water recharge inputs to the aquifer. No measured water-quality results were greater than their respective maximum contaminant levels for public drinking-water supplies. Inorganic and nutrient water-quality results for well NRF-17 and well NRF-18 suggest the groundwater in this area is potentially affected by industrial wastewater disposal.

Idaho↗
USGS2025

2024 Surprise Inlet landslides: Insights from a prototype landslide‐triggered tsunami monitoring system in Prince William Sound, Alaska

Alaska's coastal communities face growing landslide hazards owing to glacier retreat and extreme weather intensified by the warming climate, yet hazard monitoring remains challenging. As part of ongoing experimental monitoring in Prince William Sound, we detected three large landslides (0.5–2.3 M m 3 ) at Surprise Inlet on 20 September 2024, within the span of an hour. These events were identified in near real-time through seismic data and later confirmed using satellite imagery, tidal records, and infrasound. The landslides generated a modest tsunami, and a 4 cm wave was recorded by a tide gauge 18 km away, marking the first recorded landslide to reach water since monitoring began in this region in 2021. Here, we examine the detection and interpretation of these landslides using multiple data sources and modeling. We demonstrate the effectiveness of this regional seismic monitoring system and show how complementary instrumentation, where available, can enhance detection capabilities.

Alaska↗
USGS2025

Estimating earthquake source depth using teleseismic broadband waveform modeling at the USGS National Earthquake Information Center

The U.S. Geologic Survey National Earthquake Information Center (NEIC) monitors global seismicity, producing a catalog of earthquake source parameters in near-real-time to provide information that can help mitigate the societal impact of earthquakes. The NEIC commonly relies on teleseismic observations to constrain earthquake source parameters (e.g., location, depth, magnitude, and mechanism) due to a lack of local and regional observations. For these ‘teleseismic’ events, depth phase (i.e., pP , sP ) arrival time observations provide the best estimate on source depth. However, depth phases are often difficult to accurately identify and/or pick. Therefore, NEIC relies on waveform modeling, such as those determined from W-phase ( M ww ), body wave ( M wb ), and regional ( M wr ) moment tensor estimations, to provide constraints on source depth. While depth estimates from these approaches are informative, higher frequency observations provide more precise estimates because depth phases are more prominently observed at higher frequencies. Here, we present NEIC’s relatively high-frequency (~0.04 to 1 Hz) teleseismic waveform modeling approach, termed Synthetic Depth Phase Modeling (SynDepth), for determining source depth. SynDepth was developed to provide NEIC with a tool that enables rapid, accurate, and quantifiable estimates of earthquake source depth in cases where locator depths are not reliable. This relatively simple and fast procedure searches over 1 km-incremented source depths and an expanding triangular source-time function to find the best-fitting solution. We compare automatic SynDepth solutions for a dataset of 1,216 earthquakes (M5.5-M7.6) between 2017 and 2021 to NEIC-derived depth estimates from other methods. Our approach provides a robust depth estimate for earthquakes lacking local arrival time data, and it minimizes the need for analyst review of depth-phase picks ( pP , sP ) or using predefined ‘fixed’ depths.

Seismological Research Letters↗
USGS2025

A newly identified creeping strand of the Concord fault, San Francisco Bay Area

The Concord fault constitutes a major branch of the Pacific–North America transform plate boundary in Northern California, bridging the strike‐slip Bartlett Springs ‐ Green Valley Fault system to the north with the Greenville and Calaveras Faults to the south. Like many faults in the San Francisco Bay Area its long‐term slip is partially accommodated by aseismic slip (creep). Although creep has been recognized and monitored on the northern half of the fault for decades, the precise location of the southern half of the fault and its slip rate—whether accommodated seismically or aseismically—has remained enigmatic. How slip transfers between the Concord and Greenville or Calaveras faults to the south remains an outstanding question. New field observations presented here indicate that the active trace of the fault south of downtown Concord is not where previously interpreted and is indeed actively creeping. We report observations of shallow creep continuing >7 km farther south along the Concord fault than previously reported, along a fault strand not previously recognized for most of its length. This is evident as right‐laterally deflected concrete curbs and sidewalk slabs on both sides of every street that crosses the fault at a high angle in southeast Concord and northeast Walnut Creek. We document the magnitude and location of these deflections to estimate accumulated right‐lateral aseismic slip expressed in engineered structures. Offsets of these piercing lines range from 8 to 18 cm, over widths varying from narrow breaks along centimeter‐scale concrete joints to 10‐m‐wide zones of deflection. Significantly, this active trace is ∼400 m west of where the Quaternary active trace has previously been inferred, placing it within—rather than bounding—the built area of suburban Concord. Slip along the fault has already caused infrastructure damage. These results revise our understanding of the southern Concord fault and help constrain its seismic potential.

California↗
USGS2025

Hydraulic conductivity and transmissivity estimates from slug tests in wells within the Mississippi Alluvial Plain, Arkansas and Mississippi, 2020

During the spring and summer of 2020, the U.S. Geological Survey conducted single-well slug tests on selected observation wells within the Mississippi Alluvial Plain in Arkansas and Mississippi to estimate hydraulic conductivity and transmissivity values for the Mississippi River Valley alluvial and middle Claiborne aquifers. Well and aquifer data were collected from field measurements, well-construction reports, and published aquifer-thickness information. A total of 324 slug-in and slug-out tests were conducted on 48 wells by using mechanical slugs to displace the water column and submersible pressure transducers to record changes in water levels in the wells. Hydraulic conductivity of the aquifers in which the wells are screened was estimated by curve fitting the water-level-change data using aquifer test analysis software. Estimates of aquifer transmissivity were made by multiplying the estimated hydraulic conductivity value by the aquifer thickness at well locations. Mean hydraulic conductivity estimates for 44 observation wells screened in the Mississippi River Valley alluvial aquifer range from 3 to 401 feet per day, and mean transmissivity estimates range from 285 to 80,559 feet squared per day. Mean hydraulic conductivity estimates for four observation wells screened in units of the middle Claiborne aquifer range from 0.14 to 183 feet per day, and mean transmissivity estimates range from 55 to 67,913 feet squared per day. The results from these tests can be used to improve the understanding of water availability and groundwater migration, to refine groundwater models, and to ultimately provide stakeholders and decisionmakers better information for management of the groundwater resources within the Mississippi Alluvial Plain.

Arkansas, Mississippi↗