SEARCH · USGS Science

Results for “Scientific American”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26Linked to original sources

USGS2010

Bathymetric and Velocimetric Survey and Assessment of Habitat for Pallid Sturgeon on the Mississippi River in the Vicinity of the Proposed Interstate 70 Bridge at St. Louis, Missouri

A bathymetric and velocimetry survey was conducted on the Mississippi River in the vicinity of a proposed new bridge for Interstate 70 at St. Louis, Missouri. A multibeam echo sounder mapping system and an acoustic Doppler current profiler were used to obtain channel-bed elevations and vertically averaged and near-bed velocities for a 3,545-foot (1,080-meter) long reach of the Mississippi River approximately 1,935 feet (590 meters) wide from the Illinois to Missouri banks. Data from the 2009 survey were used to determine the conditions of the benthic habitat in the vicinity of the proposed Interstate 70 bridge. The channel-bed elevations ranged from approximately 346 feet (105.46 meters) to 370 feet (112.78 meters) above the North American Vertical Datum of 1988 in a majority of the channel except for the channel banks. Large dune features up to 12.5 feet (3.81 meters) high were present in the middle of the channel, and numerous smaller dunes and many ripples as smaller features were superimposed on the larger dunes. However, it is uncertain if the large dune features present in mid-channel are long-term features or an artifact of the seasonal flooding on the Mississippi River. A substantial scour depression was present on the right descending bank (Missouri side) near the downstream end of the study area, as well as other smaller scour holes near the instream barge mooring structures on the Missouri bank. The vertically averaged velocities acquired with the acoustic Doppler current profiler ranged from approximately 2 feet per second (0.61 meters per second) along the channel margins to approximately 7.0 feet per second (2.13 meters per second) in the main channel, with an average velocity of 5.5 feet per second (1.68 meters per second) in mid-channel. The orientation of the vertically averaged velocity vectors showed flow crossing from the Illinois bank to the Missouri bank from upstream to downstream in the study area, which was confirmed by the orientation of the large dune features in mid-channel and a shift in the channel thalweg from the Illinois bank to the Missouri bank. The near-bottom velocities acquired with the acoustic Doppler current profiler ranged from 0.3 to 7.0 feet per second (0.09 to 2.13 meters per second), and the effects of the large dune features were apparent in the more random scattering of the velocity vectors, the low velocities downstream from the dunes, and higher velocities near the crests of the dunes. Despite the considerable physical complexity of this site because of the arrangement of large sand dunes in the middle of the channel, existing studies do not document persistent use of these deep, fast, main-channel habitats by pallid sturgeon. Narrow channel-margin areas on both banks having relatively low velocity, high depth slope, and high velocity gradients are similar to adult migration habitats as documented on the Missouri River downstream from Kansas City, Missouri. Although the reach generally lacks features associated with sturgeon habitat selection on the Middle Mississippi River, the barge mooring areas on the right descending bank have topographic complexity and contain large woody debris and small patches of probable gravel-cobble substrate that may have positive habitat value for sturgeon or other species. Furthermore, telemetry studies have documented sturgeon migrating upstream and downstream through this reach as adults, and they probably drift downstream through this reach as free-embryo larvae. Successful upstream migration may depend on availability of areas with hydraulic complexity and relatively low velocities, as presently exist on the margins of the site. Additionally, complexity at the channel margin may provide areas where larvae settle out from drifting in the main current or may act to slow bulk drift rates. Construction of bridge piers close to the banks will likely alter hydraulics and sediment transport on the channel margins and may result in substanti

Scientific Investigations Report↗

USGS2022

Field-trip guide to continental arc to rift volcanism of the southern Rocky Mountains—Southern Rocky Mountain, Taos Plateau, and Jemez Mountains volcanic fields of southern Colorado and northern New Mexico

The southern Rocky Mountains of northern New Mexico and southern Colorado preserve the Oligocene to Pleistocene record of North American continental arc to rift volcanism. The 35–23 million year old (Ma) southern Rocky Mountain volcanic field (SRMVF), spectacularly preserved in the San Juan Mountains of southern Colorado, records the evolution of large andesitic stratovolcanoes to complex caldera clusters, from which at least 22 major ignimbrite sheets (each 150–5,000 cubic kilometers) were erupted. Outflow deposits of the SRMVF preserved along the broadly uplifted northwest flank of the northern Rio Grande rift basin (the San Luis Valley) provide critical structural and temporal constraints on the inception of crustal extension. Coincident with waning stages of SRMVF caldera-forming volcanism (~25.4 Ma), extensional tectonism was accompanied by a transition from bimodal early Miocene to intermediate-composition late Miocene and dominantly basaltic Pliocene rift volcanism of the Taos Plateau in the southern San Luis Basin. Concomitant rift volcanism in the Española Basin and bordering Jemez Mountains of northern New Mexico records a similar Miocene eruptive history dominated by intermediate-composition volcanism that transitioned locally to Pliocene rift-related basaltic volcanism of the Cerros del Rio volcanic field and culminated in eruptions of the iconic rhyolitic Pleistocene Bandelier Tuff and formation of the Valles Caldera along the northwestern rift-basin margin. This 6-day, 7-night field trip will focus, in broadly equal proportions, on rift-related extensional volcanism of the Jemez Mountains and Taos Plateau regions during the first half of the trip, and on caldera-forming volcanism of the southern Rocky Mountain volcanic field during the second half of the trip. The 35-million-year volcanic history of the region highlighted by new geologic mapping, high-resolution geochronology, petrologic, geochemical, and geophysical data facilitates discussion of (1) the magmatic response to the tectonic transition from subducted-slab arc to continental-rift volcanism; (2) the nature and temporal evolution of rift magmas; (3) fault controls on the spatial evolution of rift magmatism; (4) the diversity of continental-arc ignimbrite volcanism and associated lavas; (5) ignimbrite caldera structure and associated intrusions in three-dimension; (6) the role of recycled crystal mush and magmatic cumulates during growth of Cordilleran batholiths; and (7) high-precision geochronologic contributions to interpretation of relations between regional tectonic and volcanic processes. Most stops will be along roads, but there will be moderate hikes on trails of less than 1-hour duration covering 1–2 kilometers (0.6–1.2 miles) with modest elevation gain of <150 meters (<492 feet). The route will progress in reverse stratigraphic order, starting in the Jemez Mountains of New Mexico and proceed northward to San Luis Basin and San Luis Hills before turning west to the southeast and central San Juan Mountains. Our last full day takes us to the little-visited and only recently mapped, Bonanza caldera of the northeastern San Juan Mountains and on the final day, we leave the San Luis Valley to briefly explore the Tertiary subvolcanic plutons of the Collegiate Range along the west side of the Arkansas Valley rift valley, en route to Denver. The authors of all daily contributions acknowledge the helpful reviews by Amy Gilmer and Joe Colgan and thank Christine Chan and Jeremy Havens for assistance with figures, tables, and guidebook text.

Colorado, New Mexico↗

USGS2021

American and Sacramento Rivers, California, erodibility measurements and model

Executive Summary A previous report by the authors described sediment sampling and drilling by the U.S. Geological Survey (USGS) beside the American and Sacramento Rivers near Sacramento, California, in support of a U.S. Army Corps of Engineers project focused on regional flood control. The drilling was performed to define lithology, extract samples for laboratory testing, and perform borehole erosion tests (BETs). The U.S. Department of Agriculture (USDA) performed jet erodibility tests (JETs) near each drilling site, and a team from Texas A&M University performed laboratory tests with an erosion function apparatus (EFA). Collectively, the effort was intended to reveal spatial variations in sediment erodibility and provide data for use in a model to simulate morphological response to a major flood. The data collected by the USGS are available in a public data release. This report, developed in cooperation with the U.S. Army Corps of Engineers, provides comparisons of the three types of measurements of the erodibility of riverbed sediments. The BET is performed in the field and reveals erodibility of sediments below the bed surface. The JET is likewise performed in the field but reveals only erodibility of exposed sediments. The EFA test is done in the laboratory and was performed on soils extracted from different depths beneath the bed surface, in many cases reconstituted for laboratory testing. Tests were performed at nominally similar locations but differed by meters to tens of meters in horizontal locations. The comparison was undertaken to investigate differences among results obtained by the individual measurement approaches and to elucidate pros and cons of each method. The critical shear stress to initiate erosion and the rate of change of erosion rate per unit increase of excess shear stress, sometimes referred to as the erosion coefficient, served as the primary basis for comparison. The three test methods in some cases resulted in order of magnitude differences in estimates of these parameters. Some differences could be attributed to variances in site location or result from testing surface sediment versus a deeper layer, but systematic differences are also evident in the results. The tests performed in the laboratory using the EFA resulted in much lower values of critical shear stress and much higher values of the erosion coefficient compared to the JET tests performed by the USDA team on surface sediments. Critical shear stress was poorly resolved in the BET results because of the limited number of results per site, but the erosion coefficients derived from BET results were systematically lower than those obtained using the EFA. A new, simplified approach is also proposed to estimate the increase in channel cross-sectional area during a large flood, given data describing the initial river cross section, riverbed erodibility parameters, and peak flood discharge and duration. The model runs until the cross section erodes to an equilibrium condition or the flood ends. Output describes the area of the cross section at the end of the simulation and the time required to reach equilibrium if it was reached within the simulated period. The model assumes unique, constant values for both the critical shear stress and the erosion coefficient and represents the fluid mechanics in a simplified way, making it of limited value for quantitative predictions. It does, however, provide an indication of which cross sections are most likely to undergo the greatest change in the design event and can be used to investigate sensitivity of erosion predictions to variability in sediment erodibility measurements.

California↗

USGS2004

Geologic Map of the Woodland Quadrangle, Clark and Cowlitz Counties, Washington

The Woodland 7.5' quadrangle is situated in the Puget-Willamette Lowland approximately 50 km north of Portland, Oregon (fig. 1). The lowland, which extends from Puget Sound into west-central Oregon, is a complex structural and topographic trough that lies between the Coast Range and the Cascade Range. Since late Eocene time, the Cascade Range has been the locus of an active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. The Coast Range occupies the forearc position within the Cascadia arc-trench system and consists of a complex assemblage of Eocene to Miocene volcanic and marine sedimentary rocks. The Woodland quadrangle lies at the northern edge of the Portland Basin, a roughly 2000-km2 topographic and structural depression that is the northernmost of several sediment-filled structural basins, which collectively constitute the Willamette Valley segment of the Puget-Willamette Lowland (Beeson and others, 1989; Swanson and others, 1993; Yeats and others, 1996). The Portland Basin is approximately 70 km long and 30 km wide; its long dimension is oriented northwest. Its northern boundary coincides, in part, with the lower Lewis River, which flows westward through the center of the quadrangle. The Lewis drains a large area in the southern Washington Cascade Range, including the southern flank of Mount St. Helens approximately 25 km upstream from the quadrangle, and joins the Columbia River about 6 km south of Woodland (fig. 1). Northwest of Woodland, the Columbia River exits the broad floodplain of the Portland Basin and flows northward through a relatively narrow bedrock valley at an elevation near sea level. The flanks of the Portland Basin consist of Eocene through Miocene volcanic and sedimentary rocks that rise to elevations exceeding 2000 ft (610 m). Seismic-reflection profiles (L.M. Liberty, written commun., 2003) and lithologic logs of water wells (Swanson and others, 1993; Mabey and Madin, 1995) indicate that as much as 550 m of late Miocene and younger sediments have accumulated in the deepest part of the basin near Vancouver. Most of this basin-fill material was carried in from the east by the Columbia River but sediment deposited by streams draining the adjacent highlands are locally important. The Portland Basin has been interpreted as a pull-apart basin located in the releasing stepover between two en echelon, northwest-striking, right-lateral fault zones (Beeson and others, 1985, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). These fault zones are thought to reflect regional transpression and dextral shear within the forearc in response to oblique subduction of the Pacific Plate along the Cascadia Subduction Zone (Pezzopane and Weldon, 1993; Wells and others, 1998). The southwestern margin of the Portland Basin is a well-defined topographic break along the base of the Tualatin Mountains, an asymmetric anticlinal ridge that is bounded on its northeast flank by the Portland Hills Fault Zone (Balsillie and Benson, 1971; Beeson and others, 1989; Blakely and others, 1995), which is probably an active structure (Wong and others, 2001; Liberty and others, 2003). The nature of the corresponding northeastern margin of the basin is less clear, but a poorly defined and partially buried dextral extensional fault zone has been hypothesized from topography, microseismicity, potential field-anomalies, and reconnaissance geologic mapping (Beeson and others, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). Another dextral structure may control the north-northwest-trending reach of the Columbia River between Portland and Longview (Blakely and others, 1995; Evarts, 2002; Evarts and others, 2002). This map is a contribution to a U.S. Geological Survey program designed to improve the geologic database for the Portland Basin part of the Pacific Northwest urban corridor,

Scientific Investigations Map↗

USGS2004

Geologic Map of the Saint Helens Quadrangle, Columbia County, Oregon, and Clark and Cowlitz Counties, Washington

The Saint Helens 7.5' quadrangle is situated in the Puget-Willamette Lowland approximately 35 km north Portland, Oregon. The lowland, which extends from Puget Sound into west-central Oregon, is a complex structural and topographic trough that lies between the Coast Range and the Cascade Range. Since late Eocene time, Cascade Range has been the locus of a discontinuously active volcanic arc associated with underthrusting of oceanic lithosphere beneath the North American continent along the Cascadia Subduction Zone. The Coast Range occupies the forearc position within the Cascadia arc-trench system and consists of a complex assemblage of Eocene to Miocene volcanic and marine sedimentary rocks. The Saint Helens quadrangle lies in the northern part of the Portland Basin, a roughly 2000-km2 topographic and structural depression. It is the northernmost of several sediment-filled structural basins that collectively constitute the Willamette Valley segment of the Puget-Willamette Lowland (Beeson and others, 1989; Swanson and others, 1993; Yeats and others, 1996). The rhomboidal basin is approximately 70 km long and 30 km wide, with its long dimension oriented northwest. The Columbia River flows west and north through the Portland Basin at an elevation near sea level and exits through a confined bedrock valley less than 2.5 km wide about 16 km north of Saint Helens. The flanks of the basin consist of Eocene through Miocene volcanic and sedimentary rocks that rise to elevations exceeding 2000 ft (610 m). Seismic-reflection profiles (L.M. Liberty, written commun., 2003) and lithologic logs of water wells (Swanson and others, 1993; Mabey and Madin, 1995) indicate that as much as 550 m of late Miocene and younger sediments have accumulated in the deepest part of the basin near Vancouver. Most of this basin-fill material was carried in from the east by the Columbia River but contributions from streams draining the adjacent highlands are locally important. The Portland Basin has been interpreted as a pull-apart basin located in the releasing stepover between two echelon, northwest-striking, right-lateral fault zones (Beeson and others, 1985, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). These fault zones are thought to reflect regional transpression and dextral shear within the forearc in response to oblique subduction along the Cascadia Subduction Zone Pezzopane and Weldon, 1993; Wells and others, 1998). The southwestern margin of the Portland Basin is a well-defined topographic break along the base of the Tualatin Mountains, an asymmetric anticlinal ridge that is bounded its northeast flank by the Portland Hills Fault Zone (Balsillie and Benson, 1971; Beeson and others, 1989; Blakely and others, 1995), which is probably an active structure (Wong and others, 2001; Liberty and others, 2003). The nature of the corresponding northeastern margin of the basin is less clear, but a poorly defined and partially buried dextral extensional fault zone has been hypothesized from topography, microseismicity, potential fieldanomalies, and reconnaissance geologic mapping (Beeson and others, 1989; Beeson and Tolan, 1990; Yelin and Patton, 1991; Blakely and others, 1995). Another dextral structure, the Kalama Structural Zone of Evarts (2002), may underlie the north-northwest-trending reach of the Columbia River north of Woodland (Blakely and others, 1995). This map is a contribution to a U.S. Geological Survey (USGS) program designed to improve the geologic database for the Portland Basin region of the Pacific Northwest urban corridor, the populated forearc region of western Washington and Oregon. Better and more detailed information on the bedrock and surficial geology of the basin and its surrounding area is needed to refine assessments of seismic risk (Yelin and Patton, 1991; Bott and Wong, 1993), ground-failure hazards (Madin and Wang, 1999; Wegmann and Walsh, 2001) and resource availability in this rapid

Scientific Investigations Map↗

USGS2013

Potential effects of deepening the St. Johns River navigation channel on saltwater intrusion in the surficial aquifer system, Jacksonville, Florida

The U.S. Army Corps of Engineers (USACE) has proposed dredging a 13-mile reach of the St. Johns River navigation channel in Jacksonville, Florida, deepening it to depths between 50 and 54 feet below North American Vertical Datum of 1988. The dredging operation will remove about 10 feet of sediments from the surficial aquifer system, including limestone in some locations. The limestone unit, which is in the lowermost part of the surficial aquifer system, supplies water to domestic wells in the Jacksonville area. Because of density-driven hydrodynamics of the St. Johns River, saline water from the Atlantic Ocean travels upstream as a saltwater “wedge” along the bottom of the channel, where the limestone is most likely to be exposed by the proposed dredging. A study was conducted to determine the potential effects of navigation channel deepening in the St. Johns River on salinity in the adjacent surficial aquifer system. Simulations were performed with each of four cross-sectional, variable-density groundwater-flow models, developed using SEAWAT, to simulate hypothetical changes in salinity in the surficial aquifer system as a result of dredging. The cross-sectional models were designed to incorporate a range of hydrogeologic conceptualizations to estimate the effect of uncertainty in hydrogeologic properties. The cross-sectional models developed in this study do not necessarily simulate actual projected conditions; instead, the models were used to examine the potential effects of deepening the navigation channel on saltwater intrusion in the surficial aquifer system under a range of plausible hypothetical conditions. Simulated results for modeled conditions indicate that dredging will have little to no effect on salinity variations in areas upstream of currently proposed dredging activities. Results also indicate little to no effect in any part of the surficial aquifer system along the cross section near River Mile 11 or in the water-table unit along the cross section near River Mile 8. Salinity increases of up to 4.0 parts per thousand (ppt) were indicated by the model incorporating hydrogeologic conceptualizations with both a semiconfining bed over the limestone unit and a preferential flow layer within the limestone along the cross section near River Mile 8. Simulated increases in salinity greater than 0.2 ppt in this area were generally limited to portions of the limestone unit within about 75 feet of the channel on the north side of the river. The potential for saltwater to move from the river channel to the surficial aquifer system is limited, but may be present in areas where the head gradient from the aquifer to the river is small or negative and the salinity of the river is sufficient to induce density-driven advective flow into the aquifer. In some areas, simulated increases in salinity were exacerbated by the presence of laterally extensive semiconfining beds in combination with a high-conductivity preferential flow zone in the limestone unit of the surficial aquifer system and an upgradient source of saline water, such as beneath the salt marshes near Fanning Island. The volume of groundwater pumped in these areas is estimated to be low; therefore, saltwater intrusion will not substantially affect regional water supply, although users of the surficial aquifer system east of Dames Point along the northern shore of the river could be affected. Proposed dredging operations pose no risk to salinization of the Floridan aquifer system; in the study area, the intermediate confining unit ranges in thickness from more than 300 to about 500 feet and provides sufficient hydraulic separation between the surficial and Floridan aquifer systems.

Florida↗

USGS2015

Water-level altitudes 2015 and water-level changes in the Chicot, Evangeline, and Jasper aquifers and compaction 1973-2014 in the Chicot and Evangeline aquifers, Houston-Galveston region, Texas

Most of the land-surface subsidence in the Houston-Galveston region, Texas, has occurred as a direct result of groundwater withdrawals for municipal supply, commercial and industrial use, and irrigation that depressured and dewatered the Chicot and Evangeline aquifers, thereby causing compaction of the aquifer sediments, mostly in the fine-grained silt and clay layers. This report, prepared by the U.S. Geological Survey in cooperation with the Harris-Galveston Subsidence District, City of Houston, Fort Bend Subsidence District, Lone Star Groundwater Conservation District, and Brazoria County Groundwater Conservation District, is one in an annual series of reports depicting water-level altitudes and water-level changes in the Chicot, Evangeline, and Jasper aquifers and measured cumulative compaction of subsurface sediments in the Chicot and Evangeline aquifers in the Houston-Galveston region. The report contains regional-scale maps depicting approximate 2015 water-level altitudes (represented by measurements made during December 2014–March 2015) for the Chicot, Evangeline, and Jasper aquifers; maps depicting 1-year (2014–15) water-level changes for each aquifer; maps depicting approximate contoured 5-year (2010–15) water-level changes for each aquifer; maps depicting approximate contoured long-term (1990–2015 and 1977–2015) water-level changes for the Chicot and Evangeline aquifers; a map depicting approximate contoured long-term (2000–15) water-level changes for the Jasper aquifer; a map depicting locations of borehole-extensometer sites; and graphs depicting measured cumulative compaction of subsurface sediments at the borehole extensometers during 1973–2014. Three tables listing the water-level data used to construct each water-level map for each aquifer and a table listing the measured cumulative compaction data for each extensometer site and graphs are included. In 2015, water-level-altitude contours for the Chicot aquifer ranged from 175 feet (ft) below the vertical datum (the National Geodetic Vertical Datum of 1929 or the North American Vertical Datum of 1988; hereinafter, datum) in a localized area in northwestern Harris County to 200 ft above datum in northern and western Montgomery County. Water-level changes for 2014–15 in the Chicot aquifer ranged from a 24-ft decline to a 31-ft rise. Contoured 5-year and long-term water-level changes in the Chicot aquifer ranged from a 40-ft decline to a 40-ft rise (2010–15), from a 100-ft decline to a 100-ft rise (1990–2015), and from a 100-ft decline to a 200-ft rise (1977–2015). In 2015, water-level-altitude contours for the Evangeline aquifer ranged from 250 ft below datum in a localized area extending from south-central Montgomery County into north-central Harris County and in an additional area located in central Harris County to 200 ft above datum in southeastern Grimes and northwestern Montgomery Counties. Water-level changes for 2014–15 in the Evangeline aquifer ranged from a 66-ft decline to a 78-ft rise. Contoured 5-year and long-term water-level changes in the Evangeline aquifer ranged from a 60-ft decline to an 80-ft rise (2010–15), from a 200-ft decline to a 240-ft rise (1990–2015), and from a 320-ft decline to a 240-ft rise (1977–2015). In 2015, water-level-altitude contours for the Jasper aquifer ranged from 200 ft below datum in south-central Montgomery County that extends into north-central Harris County to 250 ft above datum in northwestern Montgomery County. Water-level changes for 2014–15 in the Jasper aquifer ranged from a 17-ft decline to a 35-ft rise. Contoured 5-year and long-term water-level changes in the Jasper aquifer ranged from a 60-ft decline to four small, localized areas of 10-ft rises (2010–15) and from a 220-ft decline to no change (2000–15). Compaction of subsurface sediments (mostly in the fine-grained silt and clay layers) composing the Chicot and Evangeline aquifers was recorded continuously by using analog technology at the 13 borehole extensometers at 11 sites that were either activated or installed between 1973 and 1980. For the period of record beginning in 1973 (or later depending on activation or installation date) and ending in December 2014, measured cumulative compaction at the 13 extensometers ranged from 0.101 ft at the Texas City-Moses Lake extensometer to 3.668 ft at the Addicks extensometer. During 2014, a total of 10 of the 13 extensometers recorded a slight net decrease of land-surface elevation; the extensometers at the Lake Houston and Clear Lake (shallow) sites recorded slight net increases of land-surface elevation, and the extensometer at the Texas City-Moses Lake site recorded no change in elevation. The rate of compaction varies from site to site because of differences in rates of groundwater withdrawal in the areas adjacent to each extensometer site and differences among sites in the ratios of sand, silt, and clay and compressibilities of the subsurface sediments. It is not appropriate, therefore, to extrapolate or infer a rate of compaction for an adjacent area on the basis of the rate of compaction measured at nearby extensometers.

Texas↗

USGS2018

Quaternary sediment thickness and bedrock topography of the glaciated United States east of the Rocky Mountains

Beginning roughly 2.6 million years ago, global climate entered a cooling phase known as the Pleistocene Epoch. As snow in northern latitudes compacted into ice several kilometers thick, it flowed as glaciers southward across the North American continent. These glaciers extended across the northern United States, dramatically altering the landscape they covered. East of the Rocky Mountains, the ice coalesced into continental glaciers (called the Laurentide Ice Sheet) that at times blanketed much of the north-central and northeastern United States. To the west of the Laurentide Ice Sheet, glaciers formed in the mountains of western Canada and the United States and coalesced into the Cordilleran ice sheet; this relatively smaller ice mass extended into the conterminous United States in the northernmost areas of western Montana, Idaho, and Washington. Throughout the Pleistocene, landscape alteration occurred by (1) glacial erosion of the rocks and sediments; (2) redeposition of the eroded earth materials in a form substantially different from their source rocks, in terms of texture and overall character; and (3) disruption of preexisting drainage patterns by the newly deposited sediments. In many cases, pre-glacial drainage systems (including, for example, the Mississippi River) were rerouted because their older drainage courses became blocked with glacial sediment. The continental glaciers advanced and retreated many times across those areas. During each ice advance, or glaciation, erosion and deposition occurred, and the landscape was again altered. Through successive glaciations, the landscape and the bedrock surface gradually came to resemble their present configurations. As continental ice sheets receded and the Pleistocene ended, erosion and deposition of sediment (for example in stream valleys) continued to shape the landscape up to the present day (albeit to a lesser extent than during glaciation). The interval of time since the last recession of the glaciers is called the Holocene and, together with the Pleistocene, constitutes the Quaternary Period of geologic time; this publication characterizes the three-dimensional geometry of the Quaternary sediments and the bedrock surface that lies beneath. The pre-glacial landscape was underlain mostly by weathered bedrock generally similar in nature to that found in many areas of the non-glaciated United States. Glacial erosion and redeposition of earth materials produced a young, mineral-rich soil that formed the basis for the highly productive agricultural economy in the U.S. midcontinent. Extensive buried sands and gravels within the glacial deposits also provided a stimulus to other economic sectors by serving as high-quality aquifers supplying groundwater to the region’s industry and cities. An understanding of the three-dimensional distribution of these glacial sediments has direct utility for addressing various societal issues including groundwater quality and supply, and landscape and soil response to earthquake-induced shaking. The Quaternary sediment thickness map and bedrock topographic map shown here provide a regional overview and are intended to supplement the more detailed work on which they are based. Detailed mapping is particularly useful in populated areas for site-specific planning. In contrast, regional maps such as these serve to place local, detailed mapping in context; to permit the extrapolation of data into unmapped areas; and to depict large-scale regional geologic features and patterns that are beyond the scope of local, detailed mapping. They also can enhance the reader’s general understanding of the region’s landscape and geologic history and provide a source of information for regional decision making that could benefit by improved predictability of bedrock depth beneath the unconsolidated Quaternary sediments. To enable these maps to be analyzed in conjunction with other types of information, this publication also includes the map data in GIS compatible format.

Scientific Investigations Map↗

USGS2021

Groundwater hydrology and chemistry of Jamestown Island, Virginia—Potential effects of tides, storm surges, and sea-level rise on archaeological, cultural, and ecological resources

As the site of the first permanent English settlement in North America in 1607, Jamestown Island, Colonial National Historical Park (COLO), Virginia, contains a rich archaeological record that extends from the Paleoindian period (15,000 to 8,000 years ago) through the 20th century. The island is located on the lower James River near the mouth of Chesapeake Bay. Jamestown Island vegetation is dominated by upland forests surrounded by tidal, freshwater-to-oligohaline marshes. Along the Virginia coast, relative sea-level rise was more than 2.5 times the global average during the 20th century. Consequently, the National Park Service (NPS) has identified COLO as one of the 25 national parks most threatened by climate change. Surface waters across the island are hydraulically connected to the laterally continuous Surficial aquifer. The land-surface altitude of the island is low, with two-thirds of the island less than 5 feet (ft) above the North American Vertical Datum of 1988 (NAVD 88). Consequently, sea-level rise, combined with tides and storm surges, threatens the island and its resources as surface-water and groundwater levels rise, saltwater enters the Surficial aquifer, and groundwater chemistry changes. The impact of sea-level rise on the island’s surface-water resources has been well studied, but groundwater effects have been largely ignored. Quantifying the effects of tides, storm surges, and sea-level rise on groundwater levels and chemistry is essential to developing an effective strategy for managing climate-induced changes. The first step in developing a response strategy includes a parkwide general risk assessment for archaeological sites on the island, so that sites can be prioritized for management actions. The U.S. Geological Survey and the NPS began a study in 2015 to develop a long-term groundwater-monitoring program to evaluate this risk and to develop an updated management strategy. The groundwater-monitoring program consists of 45 wells and piezometers in two individual clusters and three transects across the island in different hydrologic and chemical settings. Samples for water quality were collected from the wells and piezometers from October 2015 through September 2018 at variable time intervals. Results of the monitoring identified disparate hydrologic and chemical responses to saltwater intrusion across the island. Specific conductance (an indicator of salinity) of groundwater beneath several marshes responded differently to changes in James River salinity. Groundwater response to changes in James River specific conductance appeared to be controlled by land-surface altitude and slope, differences in lateral and vertical sediment characteristics, distance from surface waters, and the degree of surface water/groundwater connectivity between channels and the aquifer. Groundwater chemistry data from monitoring wells at Black Point, a low-altitude, upland setting, are in contrast with conditions observed in Island House observation wells, a high-altitude, upland setting. Specific conductance (less than 200 microsiemens per centimeter [μS/cm]) and pH (greater than 5.0) of groundwater beneath much of the uplands that characterize the Island House observation wells are typical of groundwater in noncarbonate sedimentary aquifers recharged by precipitation. At Black Point, specific conductance ranged from 2,490 to 15,200 μS/cm, and pH ranged from 3.1 to 6.6 standard units. At the Black Point observation wells, the most saline and dense water was at the water table rather than deeper in the aquifer, causing a density inversion that persisted throughout the study. The density inversion likely resulted from differences in permeability between the shallow clay and fine-grained sands and the deeper coarse-grained sand and gravel. Groundwater with the lowest pH was at the water table. As saline groundwater flows through organic sediment beneath the marshes, bacterial biodegradation of organic matter creates anoxic conditions. Continued biodegradation concomitantly reduces iron-oxide minerals in the sediment and sulfate in saline water. When oxygen is reintroduced into groundwater, iron and sulfur can reoxidize to form sulfuric acid, locally lowering the pH of the water. This report describes the groundwater monitoring network design, rationale for site selection, monitoring approach, and results of monitoring from October 2015 through September 2018. Maps of inundation at selected water-level altitudes are included to identify the risk to archaeological, cultural, and ecological resources. The monitoring results of the hydrology and chemistry data are interpreted, and the different hydrologic and chemical settings are described. The implications of the study results for management decisions are presented, and suggestions for improving the monitoring network are included.

Virginia↗

USGS2024

Monitoring marine eruptions

Introduction Submarine volcanoes produce much of the same seismicity and eruptive activity as subaerial volcanoes and can pose hazards to society. Although they can be monitored with similar techniques and methods as described in other chapters of this volume, their submerged location brings unique challenges. This chapter addresses these challenges and provides recommendations for monitoring volcanoes fully or partly in marine environments to meet the capabilities described in other chapters of this volume. The United States and its territories host dozens of submarine volcanoes with most (around 60) in the Commonwealth of the Northern Mariana Islands. Approximately 20 of the Northern Mariana Islands submarine volcanoes are known to be hydrothermally active, and 10 have confirmed eruptions since the 1950s (for example, Baker and others, 2008; Tepp and others, 2019a). Nine of those volcanoes were considered by the National Volcanic Threat Assessment (Ewert and others, 2018) to have a combination of eruptive type and summit depth that poses a higher risk of hazardous eruptions, although only one was listed as a moderate (level 3) threat. Other notable submarine volcanoes of interest to the United States that have historically erupted are Axial Seamount off the Washington State coast, Kamaʻehuakanaloa in Hawaiʻi, and Vailuluʻu seamount in American Samoa. All of these, however, have a low risk of hazards because of their depth (greater than 600 meters below sea level) and eruptive type and so are not included in the National Volcanic Threat Assessment. In addition to submarine volcanoes, the submerged flanks of island volcanoes can also be a source of hazardous submarine eruptions—for example, the 1877 eruption of Mauna Loa, Hawai‘i, in Kealakekua Bay (Wanless and others, 2006). The most notable submarine eruption in recent times was the 2022 eruption of Hunga Tonga–Hunga Haʻapai in Tonga, which was one of the largest eruptions on Earth in the past 100 years. It created a massive volcanic plume, unprecedented shock waves, and far-reaching tsunami (Lynett and others, 2022). Other recent submarine eruptions in the Pacific Ocean Basin have produced subaerial plumes that reached aircraft heights (Carey and others, 2014) and large pumice rafts that can affect marine traffic and harbors (for example, Jutzeler and others, 2014; Kornei, 2019). These examples illustrate the potential hazards of major submarine eruptions. Yet, submarine volcanoes are largely unmonitored, and many eruptions occur that are unnoticed or only identified hours or days afterward. Within U.S. territory, submarine volcanoes in the Northern Mariana Islands have been known to produce eruptive activity that can affect society. Reports from fishermen and other marine vessels in the Northern Mariana Islands have noted underwater explosions, sea-surface discoloration, and bubbling water, all of which are known to be signs of submarine volcanic activity. South Sarigan seamount, located about 160 kilometers (km) north of Saipan, erupted in 2010 from greater than 150 meters below the sea surface, resulting in a gas and ash plume that reached more than 11.9 km into the atmosphere (for example, Searcy, 2013; Embley and others, 2014), high enough to affect international air traffic. Precursory and co-eruptive seismicity was detected on the regional Northern Mariana Islands seismic network (Searcy, 2013) and on global monitoring instruments (Green and others, 2013). Monitoring of submarine volcanoes is best accomplished with marine-based instrumentation, which is also useful for monitoring small island volcanoes that may not have the land area necessary for comprehensive subaerial monitoring. The primary marine-based instrumentation used for submarine volcanoes includes ocean-bottom pressure sensors to assess sea-floor deformation, ocean-bottom seismometers (OBSs) to detect seismicity, and both moored and ocean-bottom hydrophones to detect submarine explosions. Other sensors offer important monitoring data, such as turbidity, temperature, and chemistry of hydrothermal emissions. Marine-based instruments are typically deployed in campaign-style networks with no real-time telemetry owing to cost considerations and technical limitations. However, when necessary, marine instruments can be operated in real time using cables to transmit data to land-based facilities; other technologies for this purpose are in use or in development, such as acoustic transmission from the instrument to a moored buoy (Matsumoto and others, 2016) and a winch-based system with a satellite antenna that is part of the instrument mooring (Matsumoto and others, 2019). Emerging technologies for marine-based monitoring may be considered as part of a future monitoring plan. These technologies include ocean gliders and floats with on-board hydrophones that have been used to record earthquakes and submarine eruptions (for example, Matsumoto and others, 2013; Sukhovich and others, 2015) and fiber-optic cables that have been used as strainmeters to detect earthquakes (for example, Marra and others, 2018; Lindsey and others, 2019). Land-based instruments and satellites can also provide some capability for monitoring submarine volcanoes, but they provide more limited observations than marine-based instrumentation.

Scientific Investigations Report↗

USGS2006

Hydrogeology and simulation of ground-water flow in the Silurian-Devonian aquifer system, Johnson County, Iowa

Bedrock of Silurian and Devonian age (termed the “Silurian-Devonian aquifer system”) is the primary source of ground water for Johnson County in east-central Iowa. Population growth within municipal and suburban areas of the county has resulted in increased amounts of water withdrawn from this aquifer and water-level declines in some areas. A 3-year study of the hydrogeology of the Silurian-Devonian aquifer system in Johnson County was undertaken to provide a quantitative assessment of ground water resources and to construct a ground-water flow model that can be used by local governmental agencies as a management tool. Johnson County is underlain by unconsolidated deposits of Quaternary age and Paleozoic-age bedrock units. The bulk of the Quaternary deposits consists of weathered and unweathered glacial till; however, shallow alluvium and buried sand and gravel deposits also are present. Six bedrock hydrogeologic units are present in Johnson County (oldest to youngest): Maquoketa confining unit, Silurian aquifer, Wapsipinicon Group (aquifer and confining unit), Cedar Valley aquifer, Upper Devonian shale confining unit, and Cherokee confining unit. Although separate aquifers and confining units are described, the Silurian- and Devonian-age units are considered as a single aquifer system. The top of the Silurian-Devonian aquifer system is considered as the top of the Cedar Valley aquifer, where present, and the base of the aquifer system is considered as the top of the Maquoketa confining unit. The hydraulic properties of the rocks that comprise the Silurian-Devonian aquifer system are highly variable as a result of the variable composition of the rocks and the presence of solution features in some of the carbonate-rock units. For the combined Silurian-Devonian aquifer system, specific capacity averages 2.1 gallons per minute per foot of drawdown, transmissivity averages about 580 feet squared per day, and hydraulic conductivity averages 8.3 feet per day. Recharge to the Silurian-Devonian aquifer system in Johnson County is predominantly from infiltration of precipitation to the bedrock. Discharge from the aquifer is primarily to municipal, industrial, and private-development wells. Reliable measurements of the amount of recharge to or discharge from the ground-water system in Johnson County, however, are not available. Altitude of the 1996 potentiometric surface ranged from more than 750 feet above the North American Vertical Datum of 1988 (NAVD88) in northern Johnson County to less than 575 feet above NAVD88 in the central part of the county. A large cone of depression within the potentiometric surface is present in the central part of the county, between Coralville and Iowa City. A large limestone quarry is located near the center of this cone of depression. Ground water generally flows from the northern and western parts of Johnson County either toward the cone of depression in the center of the county or south out of the county. Ground water also flows toward the Cedar River in the northeastern part of the county. A ground-water divide in the northeastern part of the county roughly approximates the surface-water divide between the Iowa River and Cedar River drainages. A numerical ground-water-flow model of the Silurian-Devonian aquifer system in Johnson County was used to test concepts of ground-water flow, to assess the need for additional data, and to evaluate the potential effects of anticipated increased ground-water development and drought. The 1-layer model was calibrated to average 1996 ground-water conditions, which were assumed to approximate steady-state flow conditions. The model also was used to simulate steady-state conditions for 2004, steady-state conditions using anticipated pumping rates for 2025, and potential future drought conditions. The simulated potentiometric surface generally replicated the potentiometric surface for 1996 and 2004 conditions. The calculated root mean squared error values for the 1996 and 2004 simulations were 13.6 and 18.6 feet, respectively. The mean absolute differences between measured and simulated water levels for the 1996 and 2004 simulations were about 11 and 14 feet, respectively. Total model-calculated inflow to the ground-water system for the 1996 simulation was 19.6 million gallons per day (Mgal/d), and the largest model-calculated inflow component was areal recharge (15.1 Mgal/d). Total model-calculated outflow from the ground-water system was 19.7 Mgal/d, and the largest outflow component was discharge to wells (10.5 Mgal/d). Model-calculated water-budget components for the 2004 simulation were similar to the 1996 components. Potential future steady-state conditions were simulated using anticipated 2025 pumping rates. Pumpage both for existing wells and for assumed new wells, based on anticipated population growth in the northern part of the county and for the nearby municipalities, was included in the model. Simulated 2025 pumpage was about 1.5 Mgal/d greater than simulated 2004 pumpage. Simulated steady-state ground-water levels, using anticipated 2025 pumping rates, were lower than 2004 simulated levels throughout the county, and simulated water-level declines ranged from less than 1 foot near the county boundaries to about 11 feet. Potential future drought conditions were simulated by assuming that recharge to the Silurian-Devonian aquifer system is reduced by a factor of 0.75 and that water-supply pumpage is increased by a factor of 1.25 over the anticipated 2025 pumping rates. Overall, simulated water levels for future drought conditions were greater than 5 feet lower than simulated 2004 conditions and were a maximum of about 30 feet lower in the northeastern part of the county. The greatest limitation to the model is the lack of measured or estimated water-budget components for comparison to simulated water-budget components. Because the model is only calibrated to measured water levels, and not to water-budget components, the model results are nonunique. Other model limitations include the relatively coarse grid scale, lack of detailed information on pumpage from the quarry and from private developments and domestic wells, and the lack of separate water-level data for the Silurian- and Devonian-age rocks.

Iowa↗

USGS2020

Total water level data from the January and March 2018 nor’easters for coastal areas of New England

During winter 2017–18 coastal areas of New England were impacted by the January 4, and March 2–4, 2018, nor’easters. The U.S. Geological Survey (USGS), under an interagency agreement with the Federal Emergency Management Agency (FEMA), collected total water level data (the combination of tide, storm surge, wave runup and setup, and freshwater input) using the North American Vertical Datum of 1988 (NAVD 88) from high-water marks and continuous water-level sensors, to better understand the areal extent, timing, and impact of coastal flooding from strong storms. During the January 4, 2018, nor’easter the National Oceanic and Atmospheric Administration (NOAA) Boston, Massachusetts, tide gage recorded the highest total water level on record of 9.66 ft. During the March 2–4, 2018, nor’easter, the Boston tide gage recorded its third highest total water level on record of 9.16 ft. After the January and March 2018 nor’easter storms, the USGS deployed field teams that identified and flagged high-water marks along the coastlines of eastern Massachusetts in January and from Portland, Maine, south to the Connecticut-New York State border in March. In preparation for the approach of the March 2018 nor’easter, the USGS deployed 35 temporary water-level sensors along the coastline of New England to collect total water level data during the storm. Total water level data were also collected at 28 tide gages and 14 coastal streamgages (affected tidally or by tidal backwater during coastal storms) in New England during both nor’easters. Total water level elevations at 71 high-water marks collected after the January 2018 nor’easter in coastal areas of eastern Massachusetts ranged from 5.8 to 15.1 feet (ft), with an average elevation of 9.4 ft and a median elevation of 9.6 ft. Total water level elevations at 10 tide gages and 7 coastal streamgages from Portland to Cape Cod Bay ranged from 4.8 to 11.2 ft, with an average of 9.1 ft and a median of 9.6 ft. Following the March 2018 nor’easter, 111 high-water marks were collected along the New England coastline. Of the 111 high-water marks, 100 were along the eastern coastline of New England from Portland to Cape Cod and had elevations that ranged from 5.3 to 15.1 ft, with an average of 8.9 ft and a median of 8.6 ft. The remaining 11 high-water marks along the southern coastline of New England in Connecticut, Rhode Island, and Massachusetts had elevations that ranged from 3.1 to 7.5 ft, with an average of 4.3 ft and a median of 4.9 ft. Total water level elevations for 19 USGS temporary water-level sensors from Portland to Cape Cod Bay ranged from 6.2 to 10.4 ft, with an average of 8.4 ft and a median of 8.7 ft. Total water level elevations at 10 tide gages and 6 coastal streamgages from Portland to Cape Cod Bay ranged from 7.8 to 10.8 ft, with an average of 9.1 ft and a median of 9.2 ft. There were 10 tide gages and 5 coastal streamgages with data from both nor’easters from Portland to Cape Cod Bay; for the January nor’easter, the average and median elevations were about 0.3 and 0.5 ft higher, respectively, than for the March nor’easter. At the 52 high-water mark locations with data for both nor’easters in Massachusetts, the average and median elevations were 0.1 and 0.4 ft higher, respectively, for the January nor’easter than for the March nor’easter. At 10 tide gages along the coastline from Portland to Cape Cod Bay, the observed peak total water level elevations for the January nor’easter ranged from 1.6 to 3.7 ft higher than the concurrent predicted elevations, with an average of 2.8 ft and a median of 3.0 ft higher. For the March nor’easter, the observed peak total water level elevations ranged from 1.8 to 4.0 ft higher than the concurrent predicted elevations, with an average of 2.7 ft and a median of 3.0 ft higher. This is approximately the amount of storm surge that was experienced during the highest tides of the two nor’easters along the coastline from Portland to Cape Cod Bay.

Connecticut, Maine, Massachusetts, New Hampshire, ↗

USGS2011

Thermal profiles for selected river reaches in the Stillaguamish River basin, Washington, August 2011

Datums Horizontal coordinate information is referenced to the North American Datum of 1983 (NAD 83). Abstract Longitudinal profiles of near-streambed temperature were collected for eight river reaches in the Stillaguamish River basin, Washington, during August 2011, to provide information about areas of groundwater discharge to streams. During summer, groundwater discharge can be a source of cold water to streams that regulates warm stream temperatures creating cold-water thermal refugia for native stream biota including salmon and trout. To assess areas of groundwater discharge to streams, temperature was measured using a probe with an internal datalogger towed behind a watercraft moving downstream at ambient stream velocity. The data were referenced to location, concurrently surveyed with a Global Positioning System, during collection of the water temperature data. Data are presented as Microsoft Excel® files consisting of date and time, near-streambed water temperature, and latitude and longitude. Introduction Longitudinal profiles of near-streambed temperatures surveyed at ambient river velocity in a Lagrangian framework provide information about potential areas of groundwater discharge as well as salmonid habitat and thermal refugia (Vaccaro and Maloy, 2006). Longitudinal thermal profiles have previously been surveyed in several rivers in Washington, including the Yakima River and tributaries (Vaccaro and others, 2008) and the Nooksack River (Cox and others, 2005). This report presents eight thermal profiles within the Stillaguamish River basin including parts of the North Fork Stillaguamish River, South Fork Stillaguamish River, Jim Creek, and Pilchuck Creek (fig. 1). This data augments previous investigations of longitudinal temperature variations within the Stillaguamish River and tributaries by thermal infrared radar by the Washington State Department of Ecology (Watershed Sciences, 2002), and may be used as a tool to develop a better understanding of groundwater/surface-water interactions within the Stillaguamish River basin. Purpose and Scope The purpose of this report is to present longitudinal thermal profiles of stream temperature of streams within the Stillaguamish River basin including the North Fork Stillaguamish River, the South Fork Stillaguamish River, Pilchuck Creek, and Jim Creek. This data may be used to determine zones of groundwater discharge and improve understanding of the relation between the groundwater and surface water systems of the Stillaguamish River basin. Description of Study Area The Stillaguamish River basin is in northwestern Washington and is bounded to the east by the Cascade Mountains, to the west by Puget Sound, to the north by the Skagit River basin, and to the south by the Snohomish River basin (fig. 1). The Stillaguamish River basin is characterized by cool, wet winters and warm, dry summers. Mean annual discharge of the North Fork Stillaguamish River (North Fork Stillaguamish River near Arlington, Washington, USGS gaging station 12167000) for water years 1929-2010 is 1,898 ft 3 /s and mean annual discharge of the South Fork Stillaguamish River (South Fork Stillaguamish River near Granite Falls, Washington gaging station 12161000) for water years 1929-1980 is 1,071 ft 3 /s. Jim Creek is a tributary of the South Fork Stillaguamish River and Pilchuck Creek is a tributary of the mainstem Stillaguamish River. Thermal Profile Survey Continuous water temperature and Global Positioning System (GPS) data were collected at 3-second intervals while drifting downstream at ambient stream velocity in a Lagrangian framework following the method of Vaccaro and Maloy (2006) for Pilchuck Creek between river mile (RM) 0.0 and 3.7 (table 1); the North Fork Stillaguamish River between RM 0.0 and 34.2 (tables 2-5); South Fork Stillaguamish River between RM 17.7 and 33.4 (tables 6-7); and Jim Creek between RM 0.0 and 7.0 (table 8). Profiling at ambient stream velocity in a Lagrangian framework tracks a parcel of water as it moves downstream during the day; departures from the diurnal heating cycle may be due to groundwater input, surface-water inflows, or riparian shading. Continuous temperature was measured using a Solinst® Levelogger LT temperature probe verified by a National Institute of Standards and Technology (NIST) certified thermistor and position data was measured using a Garmin® GPSmap® 60Csx for the eight surveys during August 15-26, 2011. The temperature probe was towed behind a watercraft following the stream thalweg and dragged along the streambed except when in-stream obstacles prevented probe movement downstream. The location of each temperature measurement was determined by relating the time stamp of the GPS data to the temperature data. If a GPS location was not recorded at the same time as a temperature measurement, the location of the temperature measurement was determined by linear interpolation of the two GPS known locations that bracket the time of the temperature measurement. A 0.5-mi gap exists between the beginning of the North Fork Stillaguamish datasets collected on August 18 (table 4) and August 22 (table 5) because of inadequate equilibration of the temperature probe to ambient stream temperature during the initial 0.5 mi of the August 22 survey. Distribution of Information An Excel file of tables 1-8 that include the thermal-profile data for each longitudinal thermal profile is available at http://pubs.usgs.gov/ds/654/ds654_tables.xls. Table 1. Temperature and Global Positioning System location data for the Pilchuck Creek (RM 0.0-3.7), August 15, 2011. Table 2. Temperature and Global Positioning System location data for the North Fork Stillaguamish River (RM 30.0-34.2), August 16, 2011. Table 3. Temperature and Global Positioning System location data for the North Fork Stillaguamish River (RM 17.6-30.0), August 17, 2011. Table 4. Temperature and Global Positioning System location data for the North Fork Stillaguamish River (RM 9.5-17.6), August 18, 2011. Table 5. Temperature and Global Positioning System location data for the North Fork Stillaguamish River (RM 0.0-9.0), August 22, 2011. Table 6. Temperature and Global Positioning System location data for the South Fork Stillaguamish River (RM 25.9-33.4), August 24, 2011. Table 7. Temperature and Global Positioning System location data for the South Fork Stillaguamish River (RM 17.7-25.9), August 26, 2011. Table 8. Temperature and Global Positioning System location data for Jim Creek (RM 0.0-7.0), August 25, 2011. References Cited Cox, S.E., Simonds, F.W., Doremus, L., Huffman, R.L., and Defawe, R.M., 2005, Ground water/surface water interactions and quality of discharging ground water in streams of the lower Nooksack River Basin, Whatcom County, Washington: U.S. Geological Survey Scientific Investigations Report 2005-5255, 46 p Vaccaro, J.J., Keys, M.E., Julich, R.J., and Welch, W.B., 2008, Thermal profiles for selected river reaches in the Yakima River basin, Washington: U.S. Geological Survey Data Series 342 (Available at http://pubs.usgs.gov/ds/342/). Vaccaro, J.J., and Maloy, K.J., 2006, A thermal profile method to identify potential ground-water discharge areas and preferred salmonid habitats for long river reaches: U.S. Geological Survey Scientific Investigations Report 2006-5136, 16 p. Watershed Sciences, LLC, 2002, Aerial surveys in the Stillaguamish and Skagit River Basins-Thermal infrared and color videography: Corvallis, Oreg., Water Sciences, for Washington Department of Ecology, 28 p.

Data Series↗

USGS2025

North American Waterfowl Management Plan survey regional profile—Southeast region

Executive Summary Gaining a better understanding of the human dimensions of waterfowl management to inform the North American Waterfowl Management Plan is a valuable but challenging goal for the future success of waterfowl management. Increasing engagement with key stakeholder groups will lead to more support and effective waterfowl management. Social systems are complex because individual values and preferences may vary across geographic and cultural dimensions, so it is valuable to describe those differences rather than only looking at national-scale trends. Therefore, using broad engagement strategies that do not consider the differences among regional groups may do more harm than good. This study analyzed a subset of responses from waterfowl hunters (hereafter respondents) in the Southeast region of the United States from a national-scale survey (Patton, 2018). This study compared how respondents’ opinions differed among two subsections of the Atlantic and Mississippi flyways—the Atlantic subflyway and Mississippi subflyway—and responses from the national survey. Respondents in the Atlantic subflyway had a primary home ZIP Code in Florida, Georgia, North Carolina, South Carolina, and Tennessee. Respondents in the Mississippi subflyway had a primary home ZIP Code in Alabama, Arkansas, Kentucky, Louisiana, Missouri, and Mississippi. Investigating these differences provides waterfowl managers decision-making support and a better understanding of how perceptions may differ among respondents in the Southeast region and the Nation. Responses from each group are presented for each for each survey topic, and statistical tests of homogeneity are included to inform how the differences may be considered when managing for waterfowl and waterfowl hunting. Respondents from the Mississippi and Atlantic subflyways did not differ substantially except in their perceptions and preferences of waterfowl harvest and harvest regulations. Respondents from the Mississippi subflyway consistently reported a higher average harvest of ducks and geese, emphasized the importance of higher harvest for their satisfaction with waterfowl hunting, and typically placed a greater emphasis on regulatory decisions that facilitated increased harvest opportunity than respondents from the Atlantic subflyway. This emphasis was especially true when preferring species-specific limits more than simpler aggregate limits. Respondents in the Mississippi subflyway were in direct opposition to respondents in the Atlantic subflyway and preferred the opportunity for increased harvest that species-specific bag limits provide. Respondents in the Mississippi subflyway placed greater emphasis on harvest and larger bag limits compared with respondents in the Atlantic subflyway and the national survey. Respondents in the Atlantic subflyway often aligned with the national survey respondents’ perceptions of harvest that placed a lower emphasis on the number of ducks or geese harvested in comparison to Mississippi subflyway respondents. The Atlantic and Mississippi subflyway respondents reported hunting ducks and geese to a much lower degree than the national survey respondents, who favored only hunting ducks or hunting neither ducks nor geese. Similarly, respondents in the Mississippi and Atlantic subflyways reported that overcrowding, high hunting pressure, and interference from other respondents limited their participation to a higher degree than respondents from the national survey. The trip-specific preferences for waterfowl hunting in the Southeast region were calculated using latent class analysis and three groups were determined based on individual estimates of attribute importance: generalist, seclusionist, and harvest oriented. The generalist group did not place a high degree of importance on any one attribute and was most likely to choose to not participate given suboptimal conditions. The seclusionist group placed a high degree of importance on lower levels of competition from other groups and felt their well-being was most affected by higher levels of competition. The harvest-oriented group placed a higher degree of importance on harvesting more than three birds and felt their well-being was most negatively affected if they only expected to harvest a single bird. These groups existed uniformly between the Mississippi and Atlantic subflyways, had a slightly higher membership of each group in rural areas, and an overall higher membership in the seclusionist group. Subsetting national survey data to profile regional differences provides key information to waterfowl managers seeking to make tailored decisions in their region or flyway. This investigation provides an important resource for informed management decisions in the Southeast region and will assist waterfowl managers by supporting engagement and communication with respondents in the Southeastern United States.

Scientific Investigations Report↗

USGS2016

Hydrologic assessment of the shallow groundwater flow system beneath the Shinnecock Nation tribal lands, Suffolk County, New York

Defining the distribution and flow of shallow groundwater beneath the Shinnecock Nation tribal lands in Suffolk County, New York, is a crucial first step in identifying sources of potential contamination to the surficial aquifer and coastal ecosystems. The surficial or water table aquifer beneath the tribal lands is the primary source of potable water supply for at least 6 percent of the households on the tribal lands. Oyster fisheries and other marine ecosystems are critical to the livelihood of many residents living on the tribal lands, but are susceptible to contamination from groundwater entering the embayment from the surficial aquifer. Contamination of the surficial aquifer from flooding during intense coastal storms, nutrient loading from fertilizers, and septic effluent have been identified as potential sources of human and ecological health concerns on tribal lands. The U.S. Geological Survey (USGS) facilitated the installation of 17 water table wells on and adjacent to the tribal lands during March 2014. These wells were combined with other existing wells to create a 32-well water table monitoring network that was used to assess local hydrologic conditions. Survey-grade, global-navigation-satellite systems provided centimeter-level accuracy for positioning wellhead surveys. Water levels were measured by the USGS during May (spring) and November (fall) 2014 to evaluate seasonal effects on the water table. Water level measurements were made at high and low tide during May 2014 to identify potential effects on the water table caused by changes in tidal stage (tidal flux) in Shinnecock Bay. Water level contour maps indicate that the surficial aquifer is recharged by precipitation and upgradient groundwater flow that moves from the recharge zone located generally beneath Sunrise Highway, to the discharge zone beneath the tribal lands, and eventually discharges into the embayment, tidal creeks, and estuaries that bound the tribal lands to the east, south, and west. Water levels in many of the wells in the network fluctuated in response to precipitation, upgradient groundwater flow, and tidal flux in Shinnecock Bay. Water level altitudes ranged from 6.66 to 0.47 feet (ft) above the North American Vertical Datum of 1988 during the spring measurement period, and from 5.25 to -0.24 ft (NAVD 88) during fall 2014. Historically, annual and seasonal precipitation seem to indicate long-term water level trends in an index well located in the town of Southampton, correlates with changes in storage in the upper glacial aquifer, but does not necessarily indicate water level extremes in the shallow groundwater system. To place the study period in perspective, calendar year 2014 was the 32d wettest year on record, with precipitation for the year totaling 48.1 inches, a 2.6-percent increase from the annual average (46.9 inches per year), based on 81 years of complete record at the National Oceanographic and Atmospheric Administration, National Weather Service cooperative meteorological station at Bridgehampton, New York. Estimated recharge to the water table beneath the tribal lands from precipitation for 2014 is 25.4 inches. Tidal flux caused water levels in wells to fluctuate from 0.30 to -0.24 ft during May 2014. Water levels in wells located north of Old Fort Pond and beneath the southernmost extent of the tribal lands were most influenced by tidal flux. During June 2014, hydrographs indicate that tidal flux influenced water levels by 0.48 ft in a well located near the southernmost extent of the tribal lands approximately 0.3 miles north of Shinnecock Bay, and was zero at a well located approximately 0.5 miles south of Montauk Highway, and 0.4 miles west of Heady Creek, near the geographic center of the tribal lands. Tidal-influence delay time (time interval between peak high-tide stage and corresponding peak high-water level) ranged from 1.75 hours at the well located near the southernmost extent of the tribal lands, to more than 4 hours at a well located north of Old Fort Pond, near the northwestern part of the tribal lands. Estimated hydraulic-conductivity values derived from the results of specific-capacity tests that were completed at nine observation wells during March 2015 were used to calculate average linear velocity. Average linear velocity along conceptualized flow-path segments of the upper glacial aquifer located beneath the tribal lands was estimated using an assumed effective porosity value, and hydraulic-conductivity and hydraulic-head values that were interpolated from measured values. Groundwater travel times were estimated by dividing the length of the flow-path segment by the average linear velocity along the flow-path segment. Total estimated groundwater travel time along a conceptualized flow path, beginning near Sunrise Highway and terminating at Shinnecock Bay, is approximately 45 years using a porosity value of 30 percent. A surficial-silty unit was identified from approximately 0 to 10 ft below land surface at multiple locations beneath the tribal lands. The lithology of the surficial unit was verified by interpreted gamma log results obtained from select wells, and auger-rig drill cuttings from an observation well located near the geographic center of the tribal lands. The altitude of the unit varies with topography and was delineated along a cross section line that trends north-south along the approximate centerline (spine) of the tribal lands. The altitude of the hydrogeologic contact between the upper glacial and the Magothy aquifers generally decreases from northwest to southeast, occurs at a depth ranging from about 150 to 200 ft beneath the tribal lands, and was identified at two locations north of the tribal lands, near Sunrise Highway and Sebonac Road. Results of electrical geophysical surveys indicate that the depth to the freshwater/saltwater interface decreases from north to south with decreasing water level altitude, and the Magothy and upper glacial aquifers contain saltwater at varying depths along the north-south trending section. Results of the surveys also indicate that the Magothy aquifer beneath the tribal lands contains brackish and salty water and is not considered a source of potable water supply. In general, depth to the interface increases with increasing geographic distance from the coastline. Low water table altitudes can result in increased saltwater encroachment into the surficial aquifer beneath the tribal lands. This upward movement and shallow depth of the freshwater/saltwater interface can jeopardize water quality in wells that supply water for domestic use.

New York↗

USGS2025

Effects of beaver dams and ponds on water quality in urban streams of the Tualatin River Basin, northwestern Oregon

Significant Findings American beavers ( Castor canadensis ) are native to the Pacific Northwest, and their populations have increased in many locations after being nearly removed by historical trapping. Beaver dams have well-documented effects on water quality in forested streams, but their effects on water quality in urban streams have not been well characterized. The study documented the water-quality effects of beaver dams and beaver activity in selected urban streams of the Tualatin River Basin in northwestern Oregon. Variations in water quality upstream, downstream, and within ponded areas behind beaver dams were quantified with continuous measurements of water temperature, specific conductance, dissolved oxygen, and pH from May 2016 to November 2017 in two intensively monitored reaches of urban streams (Fanno and Bronson Creeks). Five other urban stream reaches were monitored upstream and downstream from beaver ponds using water-temperature sensors to document water-temperature changes in additional beaver-affected reaches. Spatial water-quality variations within a beaver pond along Fanno Creek were characterized in more detail on four hot summer afternoons with numerous measurements of temperature and dissolved oxygen. Results from the study were used to document and derive insights from measured patterns in the water-quality data, such as the following: Shallow and unshaded ponds created by beaver dams (such as at Fanno Creek) capture more solar radiation than channelized and shaded stream reaches, resulting in substantially warmer water temperatures during summer. A large beaver pond along Fanno Creek had variable water depths and riparian shade, resulting in a wide range of water-temperature and dissolved-oxygen conditions. Some conditions measured during summer were stressful for sensitive aquatic species, with temperatures higher than 18 degrees Celsius (°C) and (or) dissolved-oxygen concentrations less than 2 milligrams per liter (mg/L). Although water flowing out of beaver-affected reaches was warmer than water entering the reaches, water tended to cool downstream when streams returned to a more-shaded, confined channel (such as at Fanno Creek) or received subsurface inputs and exchange (such as at Bronson Creek). The magnitude of water-temperature increases in beaver ponds depended on site characteristics, such as the surface area and depth of the ponds, the extent of riparian shade, and the potential for subsurface exchange. Beaver dams caused Fanno Creek to overflow its banks, resulting in a wide and shallow floodplain pond that had little riparian shade in most places. In contrast, Bronson Creek remained in its stream channel behind the beaver dams, was often deeper and more shaded, and had more subsurface water exchange than the Fanno Creek reach. Despite the longer reach length, these differences caused the Bronson Creek reach to warm less than the Fanno Creek reach. Beaver dams trapped sediment and organic matter, and ponding increased the time available for organic matter to decompose in the trapped sediments, thus consuming dissolved oxygen. The construction of a beaver dam in the monitored reach of Bronson Creek during the study caused an increase in oxygen demands and a rapid decrease in dissolved-oxygen concentrations. Dissolved-oxygen concentrations in monitored study reaches were affected by primary production (algal photosynthesis) and respiration, and hypoxic (low to zero dissolved oxygen) conditions were measured in the two intensively monitored reaches for multiple weeks during summer. Two single-station stream metabolism models were used to calculate net ecosystem production in the two intensively monitored urban stream reaches. Results indicated that the reaches were heterotrophic, with respiration demands consuming more oxygen than what was produced through photosynthesis. Beaver ponds at all sites had a measurable effect on water quality, causing wider ranges in temperature and dissolved-oxygen conditions than would have occurred without ponding. That wider range (both spatially and temporally) might support a variety of aquatic organisms, but also is likely to increase the frequency of water-quality standard violations in those beaver-affected reaches. Any water-quality effects or standard violations associated with beaver dams and ponds, however, may be localized or transitory along the stream network. Restored stream reaches can attract beavers. Considering the potential for beaver colonization when designing habitat restoration plans will require evaluation of the potential water-quality changes associated with beaver dams and ponds alongside other desired physical changes.

Oregon↗

USGS2017

Water-level altitudes 2017 and water-level changes in the Chicot, Evangeline, and Jasper Aquifers and compaction 1973–2016 in the Chicot and Evangeline Aquifers, Houston-Galveston region, Texas

Most of the land-surface subsidence in the Houston-Galveston region, Texas, has occurred as a direct result of groundwater withdrawals for municipal supply, commercial and industrial use, and irrigation that depressured and dewatered the Chicot and Evangeline aquifers, thereby causing compaction of the aquifer sediments, mostly in the fine-grained silt and clay layers. This report, prepared by the U.S. Geological Survey in cooperation with the Harris-Galveston Subsidence District, City of Houston, Fort Bend Subsidence District, Lone Star Groundwater Conservation District, and Brazoria County Groundwater Conservation District, is one in an annual series of reports depicting water-level altitudes and water-level changes in the Chicot, Evangeline, and Jasper aquifers and measured cumulative compaction of subsurface sediments in the Chicot and Evangeline aquifers in the Houston-Galveston region. This report contains regional-scale maps depicting approximate 2017 water-level altitudes (represented by measurements made during December 2016 through March 2017) and long-term water-level changes for the Chicot, Evangeline, and Jasper aquifers; a map depicting locations of borehole-extensometer (hereinafter referred to as “extensometer”) sites; and graphs depicting measured long-term cumulative compaction of subsurface sediments at the extensometers during 1973–2016. In 2017, water-level-altitude contours for the Chicot aquifer ranged from 200 feet (ft) below the North American Vertical Datum of 1988 (hereinafter referred to as “datum”) in two localized areas in southwestern and northwestern Harris County to 200 ft above datum in west-central Montgomery County. The largest water-level-altitude decline (120 ft) depicted by the 1977–2017 water-level-change contours for the Chicot aquifer was in northwestern Harris County. A broad area where water-level altitudes declined in the Chicot aquifer extends from northwestern, north-central, and southwestern Harris County across parts of north-central, eastern, and south-central Fort Bend County into southeastern Waller County. Adjacent to the areas where water levels declined was a broad area where water levels rose in central, eastern, and southeastern Harris County, most of Galveston County, eastern and northernmost Brazoria County, and northeastern Fort Bend County. The largest rise (200 ft) in water-level altitudes in the Chicot aquifer from 1977 to 2017 was in southeastern Harris County. The water-level-altitude contours for the Evangeline aquifer in 2017 indicated two areas where the water-level altitudes were 250 ft below datum—one area extending from south-central Montgomery County into north-central Harris County and another area in western Harris County. Water-level altitudes in the Evangeline aquifer ranged from 50 to 200 ft below datum throughout most of Harris County in 2017. In Montgomery County, water-level altitudes in the Evangeline aquifer in 2017 ranged from the aforementioned area where they were 250 ft below datum to an area where they were 200 ft above datum in the northwestern part of the county. The 1977–2017 water-level-change contours for the Evangeline aquifer depict a broad area where water-level altitudes declined in north-central Harris and south-central Montgomery Counties, extending through north-central, northwestern, and southwestern Harris County into western Liberty, southeastern and northeastern Waller, and northeastern and east-central Fort Bend Counties. The largest water-level-altitude decline (280 ft) was in north-central Harris and south-central Montgomery Counties. Water-level altitudes rose in a broad area from central, east-central, and southern Harris County extending into the northernmost part of Brazoria County, the northernmost part of Galveston County, and the southwestern area of Liberty County. The largest rise in water-level altitudes in the Evangeline aquifer from 1977 to 2017 (240 ft) was in southeastern Harris County. Water-level-altitude contours for the Jasper aquifer in 2017 ranged from 200 ft below datum in three isolated areas of south-central Montgomery County (the westernmost of these areas extended slightly into north-central Harris County) to 250 ft above datum in extreme northwestern Montgomery County, northeastern Grimes County, and southwestern Walker County. The 2000–17 water-level-change contours for the Jasper aquifer depict water-level declines in a broad area throughout most of Montgomery County and in parts of Waller, Grimes, and Harris Counties, with the largest decline (220 ft) in an isolated area in south-central Montgomery County. Compaction of subsurface sediments (mostly in the fine-grained silt and clay layers) in the Chicot and Evangeline aquifers was recorded continuously by using 13 extensometers at 11 sites that were either activated or installed between 1973 and 1980. During the period of record beginning in 1973 (or later depending on activation or installation date) and ending in late November or December 2016, measured cumulative compaction at the 13 extensometers ranged from 0.096 ft at the Texas City-Moses Lake extensometer to 3.700 ft at the Addicks extensometer. From January through late November or December 2016, the Addicks, Lake Houston, Southwest, and Northeast extensometers recorded net decreases in land-surface elevation, but the Baytown C–1 (shallow), Baytown C–2 (deep), Clear Lake (shallow), Clear Lake (deep), East End, Johnson Space Center, Pasadena, Seabrook, and Texas City-Moses Lake extensometers recorded net increases in land-surface elevation. The rate of compaction varies from site to site because of differences in rates of groundwater withdrawal in the areas adjacent to each extensometer site; differences among sites in the ratios of sand, silt, and clay and their corresponding compressibilities; and previously established preconsolidation heads. It is not appropriate, therefore, to extrapolate or infer a rate of compaction for an adjacent area on the basis of the rate of compaction recorded by proximal extensometers.

Texas↗

USGS2022

Status and understanding of groundwater quality in the Sacramento Metropolitan Domestic-Supply Aquifer study unit, 2017—California GAMA Priority Basin Project

Groundwater quality in the Sacramento Metropolitan Domestic-Supply Aquifer study unit (SacMetro-DSA) was studied from August to November 2017 as part of the second phase of the Priority Basin Project of the California Groundwater Ambient Monitoring and Assessment (GAMA) Program. The study unit is in parts of Amador, Placer, Sacramento, and Sutter Counties, and the extent of the study unit was defined by the location of three California Department of Water Resources groundwater subbasins: the North American, the South American, and the Cosumnes. The SacMetro-DSA focused on groundwater resources used for domestic drinking-water supply, which generally correspond to shallower parts of aquifer systems than those of groundwater resources used for public drinking water supply in the same area. The assessments characterized the quality of untreated groundwater, not the quality of drinking water. This study included two components: (1) a status assessment, which characterized the status of the quality of the groundwater resources used for domestic supply and (2) an understanding assessment, which evaluated the natural and human factors potentially affecting water quality in those resources. The first component of this study—the status assessment—was based on water-quality data collected from 49 sites sampled by the U.S. Geological Survey for the GAMA Priority Basin Project in 2017. The samples were analyzed for volatile organic compounds, pesticides, and naturally present inorganic constituents, such as major ions and trace elements. To provide context, concentrations of constituents measured in groundwater were compared to U.S. Environmental Protection Agency and California State Water Resources Control Board Division of Drinking Water regulatory and non-regulatory benchmarks for drinking-water quality. The status assessment used a grid-based method to estimate the proportion of the groundwater resources that had concentrations of water-quality constituents approaching or above benchmark concentrations. This method provides statistically unbiased results at the study-area scale and permits comparisons to other GAMA Priority Basin Project study areas. The second component of this study—the understanding assessment—identified the natural and human factors that potentially affect groundwater quality by evaluating land-use characteristics, groundwater age, and geochemical and hydrologic conditions of the domestic-supply aquifer and related these data to constituents identified in the status assessment for further evaluation. In the SacMetro-DSA study unit, arsenic was the only inorganic constituent detected above health-based benchmarks and was detected in 10 percent of the domestic-supply aquifer system. Inorganic constituents were detected above the non-health-based California State Water Resources Control Board—Division of Drinking Water secondary maximum contaminant levels (SMCL-CA) in 16 percent of the system. The inorganic constituents detected above the SMCL-CA were chloride, iron, manganese, and total dissolved solids (TDS). Organic constituents (volatile organic compounds and pesticides) with health-based benchmarks were not detected above health-based benchmarks; however, chloroform was detected at concentrations higher than 10 percent of the health-based benchmark (80 micrograms per liter) in 2 percent of the domestic-supply aquifer system. Of the 310 organic constituents analyzed, 16 constituents were detected; however, only bentazon and chloroform had detection frequencies greater than 10 percent. Inorganic constituents with health-based benchmarks that were evaluated in the understanding assessment included arsenic and hexavalent chromium. Arsenic and hexavalent chromium are natural constituents of aquifer sediments in the study unit and did not appear to be influenced by anthropogenic processes; rather, the presence of arsenic and hexavalent chromium appeared to be related to geochemical conditions controlled by oxidation–reduction reactions in the aquifer system. Naturally occurring inorganic constituents with SMCL-CAs evaluated in the understanding assessment were the trace elements iron and manganese, the major ion chloride, and TDS. Like arsenic and hexavalent chromium, the presence of iron and manganese was most strongly related to geochemical conditions in the aquifer system, specifically reducing conditions, which were most common near the western edge of the study unit close to the Sacramento River. Concentrations of chloride and TDS are indicators of salinity and were correlated with variables related to well location and included redox, agricultural land use, and elevation. Chloride and TDS were positively correlated to reducing conditions, and agricultural land use was negatively correlated to elevation and well depth. Observed correlations among variables were likely driven by the characteristics of the western part of the study unit, such as its higher proportion of agricultural land use and its relatively low elevation. A large portion of the western edge of the study unit is located in the center of the Sacramento Valley, defined by the location of the Sacramento River. The special-interest constituent perchlorate, also included in the understanding assessment, has natural and anthropogenic sources. Perchlorate was detected frequently and at moderate relative concentrations. In some areas of the study unit, concentrations of perchlorate were higher than what might be expected in nature; therefore, anthropogenic introduction of perchlorate or anthropogenically induced migration of native perchlorate could be occurring.

California↗