Hydrogeology and simulation of ground-water flow in the Silurian-Devonian aquifer system, Johnson County, Iowa

Patrick Tucci; Robert M. McKay

doi:10.3133/sir20055266

Home/Archive/USGS

USGS · sir20055266

Hydrogeology and simulation of ground-water flow in the Silurian-Devonian aquifer system, Johnson County, Iowa

Patrick Tucci·Robert M. McKay

View original source ↗Export metadata ↓

Abstract

Bedrock of Silurian and Devonian age (termed the “Silurian-Devonian aquifer system”) is the primary source of ground water for Johnson County in east-central Iowa. Population growth within municipal and suburban areas of the county has resulted in increased amounts of water withdrawn from this aquifer and water-level declines in some areas. A 3-year study of the hydrogeology of the Silurian-Devonian aquifer system in Johnson County was undertaken to provide a quantitative assessment of ground water resources and to construct a ground-water flow model that can be used by local governmental agencies as a management tool. Johnson County is underlain by unconsolidated deposits of Quaternary age and Paleozoic-age bedrock units. The bulk of the Quaternary deposits consists of weathered and unweathered glacial till; however, shallow alluvium and buried sand and gravel deposits also are present. Six bedrock hydrogeologic units are present in Johnson County (oldest to youngest): Maquoketa confining unit, Silurian aquifer, Wapsipinicon Group (aquifer and confining unit), Cedar Valley aquifer, Upper Devonian shale confining unit, and Cherokee confining unit. Although separate aquifers and confining units are described, the Silurian- and Devonian-age units are considered as a single aquifer system. The top of the Silurian-Devonian aquifer system is considered as the top of the Cedar Valley aquifer, where present, and the base of the aquifer system is considered as the top of the Maquoketa confining unit. The hydraulic properties of the rocks that comprise the Silurian-Devonian aquifer system are highly variable as a result of the variable composition of the rocks and the presence of solution features in some of the carbonate-rock units. For the combined Silurian-Devonian aquifer system, specific capacity averages 2.1 gallons per minute per foot of drawdown, transmissivity averages about 580 feet squared per day, and hydraulic conductivity averages 8.3 feet per day. Recharge to the Silurian-Devonian aquifer system in Johnson County is predominantly from infiltration of precipitation to the bedrock. Discharge from the aquifer is primarily to municipal, industrial, and private-development wells. Reliable measurements of the amount of recharge to or discharge from the ground-water system in Johnson County, however, are not available. Altitude of the 1996 potentiometric surface ranged from more than 750 feet above the North American Vertical Datum of 1988 (NAVD88) in northern Johnson County to less than 575 feet above NAVD88 in the central part of the county. A large cone of depression within the potentiometric surface is present in the central part of the county, between Coralville and Iowa City. A large limestone quarry is located near the center of this cone of depression. Ground water generally flows from the northern and western parts of Johnson County either toward the cone of depression in the center of the county or south out of the county. Ground water also flows toward the Cedar River in the northeastern part of the county. A ground-water divide in the northeastern part of the county roughly approximates the surface-water divide between the Iowa River and Cedar River drainages. A numerical ground-water-flow model of the Silurian-Devonian aquifer system in Johnson County was used to test concepts of ground-water flow, to assess the need for additional data, and to evaluate the potential effects of anticipated increased ground-water development and drought. The 1-layer model was calibrated to average 1996 ground-water conditions, which were assumed to approximate steady-state flow conditions. The model also was used to simulate steady-state conditions for 2004, steady-state conditions using anticipated pumping rates for 2025, and potential future drought conditions. The simulated potentiometric surface generally replicated the potentiometric surface for 1996 and 2004 conditions. The calculated root mean squared error values for the 1996 and 2004 simulations were 13.6 and 18.6 feet, respectively. The mean absolute differences between measured and simulated water levels for the 1996 and 2004 simulations were about 11 and 14 feet, respectively. Total model-calculated inflow to the ground-water system for the 1996 simulation was 19.6 million gallons per day (Mgal/d), and the largest model-calculated inflow component was areal recharge (15.1 Mgal/d). Total model-calculated outflow from the ground-water system was 19.7 Mgal/d, and the largest outflow component was discharge to wells (10.5 Mgal/d). Model-calculated water-budget components for the 2004 simulation were similar to the 1996 components. Potential future steady-state conditions were simulated using anticipated 2025 pumping rates. Pumpage both for existing wells and for assumed new wells, based on anticipated population growth in the northern part of the county and for the nearby municipalities, was included in the model. Simulated 2025 pumpage was about 1.5 Mgal/d greater than simulated 2004 pumpage. Simulated steady-state ground-water levels, using anticipated 2025 pumping rates, were lower than 2004 simulated levels throughout the county, and simulated water-level declines ranged from less than 1 foot near the county boundaries to about 11 feet. Potential future drought conditions were simulated by assuming that recharge to the Silurian-Devonian aquifer system is reduced by a factor of 0.75 and that water-supply pumpage is increased by a factor of 1.25 over the anticipated 2025 pumping rates. Overall, simulated water levels for future drought conditions were greater than 5 feet lower than simulated 2004 conditions and were a maximum of about 30 feet lower in the northeastern part of the county. The greatest limitation to the model is the lack of measured or estimated water-budget components for comparison to simulated water-budget components. Because the model is only calibrated to measured water levels, and not to water-budget components, the model results are nonunique. Other model limitations include the relatively coarse grid scale, lack of detailed information on pumpage from the quarry and from private developments and domestic wells, and the lack of separate water-level data for the Silurian- and Devonian-age rocks.

Explore related subjects

Scientific Investigations Report Report

Source-reported bounding extent: 41.4222° to 41.862° latitude; -91.8337° to -91.3671° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

Patrick Tucci, Robert M. McKay. 2006. Hydrogeology and simulation of ground-water flow in the Silurian-Devonian aquifer system, Johnson County, Iowa. https://doi.org/10.3133/sir20055266

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Baseline water-quality inventory and summary for the Paterson Great Falls National Historical Park, New Jersey

The Paterson Great Falls National Historical Park (PAGR), established in 2011 in the City of Paterson, New Jersey, contains many cultural, historical, and natural resources. Because of the PAGR’s young age and limited resources, a long record of natural resource data is not available for use to guide future park management and planning decisions. A detailed natural resource inventory was identified as an immediate need in the “Foundation Document—Paterson Great Falls National Historical Park,” given the history of extensive industrial activity throughout the PAGR and the Passaic River Basin. The U.S. Geological Survey, in cooperation with the National Park Service and the Urban Waters Federal Partnership for the Lower Passaic River, inventoried water-quality monitoring efforts and compiled historical water-quality data from secondary data sources to define baseline conditions in the PAGR and the surrounding study area. This report documents the methods used to harmonize water-quality data aggregated from multiple sources for the PAGR study area. Procedures implemented during data harmonization include compiling data from multiple sources, assessing the dataset for completeness, addressing metadata concerns, and creating a consistent and quality-assured dataset for future analysis. The harmonized dataset contains 14 aggregated surface-water sites, 1,103 individual sampling days, and 32,000 water-quality records throughout the period of record defined for this study (1952–2021). Summary statistics and comparison to water-quality criteria are provided for focus parameters that can support PAGR management, including field properties, suspended material, total dissolved solids, specific conductance, chloride, sulfate, Escherichia coli, nutrients, contaminants of concern related to fish consumption advisories, and litter and floatable debris. A spatial data gap was identified for the recreational area near the base of the Great Falls and immediately downstream from a known combined sewer overflow discharge location. Analytic data gaps were identified for continuous streamflow and water-quality parameters, floatable debris characterization, and harmful algal blooms identification. Continuous collection of contaminants of concern was identified as a temporal data gap, as these parameters were not consistently collected within the study area. The water-quality data synthesis and summary presented in this report can assist PAGR staff in understanding the complex baseline water resources within the study area and can serve as a baseline to design future water-quality monitoring efforts and evaluate changes in water quality over time. The harmonized dataset, as well as future New Jersey Department of Environmental Protection and New Jersey Harbor Discharge Group monitoring data and assessments, can also be used to examine the status and trends in surface-water quality, support compliance with the Clean Water Act (33 U.S.C. 1251 et seq.), and further investigate changes to park water resources that can affect ecological and human health.

New Jersey↗

USGS2026

Slip tendency and dilation tendency of Quaternary faults in the Great Basin region, Arizona, California, Idaho, Nevada, Oregon, Utah, and Wyoming

This report presents the results of slip tendency and dilation tendency analysis of Quaternary faults in the Great Basin region, in the states of Arizona, California, Idaho, Nevada, Oregon, Utah, and Wyoming. This effort was undertaken as part of two studies: the U.S. Department of Energy Geothermal Technologies Office-funded Innovative Geothermal Exploration through Novel Investigations of Undiscovered Systems (INGENIOUS) project, which is a multidisciplinary, multi-institution effort to develop new methodologies and best practices to accelerate the discovery of new, commercially viable hydrothermal resources; and the U.S. Geological Survey Geothermal Resources Investigations Project. The goal of this work is to identify faults and fault segments that are appropriately oriented to be stress-loaded for slip or to dilate under the ambient stress conditions. Both conditions may make such faults more likely to host permeability and fluid flow relative to other faults in the region. Slip tendency and dilation tendency were calculated for all fault segments in the study area from the U.S. Geological Survey Quaternary Fault and Fold Database. Results demonstrate that faults with high slip tendency and dilation tendency are common in the Great Basin region. The areas containing many high slip tendency and dilation tendency fault segments are associated with high strain rates. These areas also host a relatively high proportion of the known hydrothermal systems. This indicates that faults with high slip tendency and dilation tendency in areas with high strain-rate are potentially most prospective for hosting hydrothermal systems. The database published in coordination with this report contains the slip tendency and dilation tendency results data, including the fault geometry and stress data used to calculate these quantities, for both the Great Basin study area and the smaller INGENIOUS study area.

Arizona, California, Idaho, Nevada, Oregon, Utah, ↗

USGS2026

A spatial analysis of the groundwater emergence flood hazard in Long Island, New York, and coastal areas surrounding Long Island Sound in New York, Connecticut, and Rhode Island

Long Island, New York, and nearby coastal areas surrounding Long Island Sound are densely populated and, like other coastal areas, are susceptible to flooding from several potential sources, including stormwater from precipitation events, tidal flooding and storm surge, and groundwater emergence flooding. Groundwater emergence fooding refers to the intersection of a rising water table with land surface or critical infrastructure. Many studies of flood drivers either neglect or only briefly discuss how shallow groundwater conditions may contribute to or exacerbate flood conditions. As a part of a comprehensive study of compound flood hazards in the coastal areas of Long Island and Long Island Sound, a spatial analysis was completed by the U.S. Geological Survey, in cooperation with the Environmental Protection Agency’s Long Island Sound Partnership, formerly called the Long Island Sound Study, using available regional datasets to characterize the potential hazard for groundwater emergence flooding. The approximately 3,100 square mile study area was subdivided into 11,407 grid cells that were 900 meters by 900 meters (approximately 3,000 feet by 3,000 feet), for the purpose of integrating the spatial datasets to calculate and map the groundwater emergence flood hazard. The depth to the water table, hydrologic soil groups, and National Land Cover Database were harmonized to the common grid. A groundwater emergence flood hazard score was calculated for each grid cell for current average conditions following a set of rules accounting for the depth to the water table and the percentage of area within each cell with slow infiltrating soils. A scenario with a higher sea-level position was also calculated for the Long Island part of the study area. The calculated groundwater emergence flood hazard score was reviewed in conjunction with the National Land Cover Database to identify developed areas and associated infrastructure that may be at risk of potential groundwater emergence flooding. Study results indicate that the groundwater emergence flood hazard is highest in coastal areas and near surface water where the water table is close to ground surface. Inland areas away from surface waterbodies are not likely to be exposed to groundwater emergence flooding. For Long Island, in the scenario with higher sea-level position, a greater groundwater emergence flood hazard is calculated for some locations closer to the coast and where land is submerged. Away from the coast and surface-water drainage, the groundwater emergence flood hazard is similar between the current average sea-level condition and the higher sea-level position scenario.

Connecticut, New York, Rhode Island↗