USGS Science⌕ Search

USGS · sir20255039D

Effects of beaver dams and ponds on water quality in urban streams of the Tualatin River Basin, northwestern Oregon

Abstract

Significant Findings American beavers ( Castor canadensis ) are native to the Pacific Northwest, and their populations have increased in many locations after being nearly removed by historical trapping. Beaver dams have well-documented effects on water quality in forested streams, but their effects on water quality in urban streams have not been well characterized. The study documented the water-quality effects of beaver dams and beaver activity in selected urban streams of the Tualatin River Basin in northwestern Oregon. Variations in water quality upstream, downstream, and within ponded areas behind beaver dams were quantified with continuous measurements of water temperature, specific conductance, dissolved oxygen, and pH from May 2016 to November 2017 in two intensively monitored reaches of urban streams (Fanno and Bronson Creeks). Five other urban stream reaches were monitored upstream and downstream from beaver ponds using water-temperature sensors to document water-temperature changes in additional beaver-affected reaches. Spatial water-quality variations within a beaver pond along Fanno Creek were characterized in more detail on four hot summer afternoons with numerous measurements of temperature and dissolved oxygen. Results from the study were used to document and derive insights from measured patterns in the water-quality data, such as the following: Shallow and unshaded ponds created by beaver dams (such as at Fanno Creek) capture more solar radiation than channelized and shaded stream reaches, resulting in substantially warmer water temperatures during summer. A large beaver pond along Fanno Creek had variable water depths and riparian shade, resulting in a wide range of water-temperature and dissolved-oxygen conditions. Some conditions measured during summer were stressful for sensitive aquatic species, with temperatures higher than 18 degrees Celsius (°C) and (or) dissolved-oxygen concentrations less than 2 milligrams per liter (mg/L). Although water flowing out of beaver-affected reaches was warmer than water entering the reaches, water tended to cool downstream when streams returned to a more-shaded, confined channel (such as at Fanno Creek) or received subsurface inputs and exchange (such as at Bronson Creek). The magnitude of water-temperature increases in beaver ponds depended on site characteristics, such as the surface area and depth of the ponds, the extent of riparian shade, and the potential for subsurface exchange. Beaver dams caused Fanno Creek to overflow its banks, resulting in a wide and shallow floodplain pond that had little riparian shade in most places. In contrast, Bronson Creek remained in its stream channel behind the beaver dams, was often deeper and more shaded, and had more subsurface water exchange than the Fanno Creek reach. Despite the longer reach length, these differences caused the Bronson Creek reach to warm less than the Fanno Creek reach. Beaver dams trapped sediment and organic matter, and ponding increased the time available for organic matter to decompose in the trapped sediments, thus consuming dissolved oxygen. The construction of a beaver dam in the monitored reach of Bronson Creek during the study caused an increase in oxygen demands and a rapid decrease in dissolved-oxygen concentrations. Dissolved-oxygen concentrations in monitored study reaches were affected by primary production (algal photosynthesis) and respiration, and hypoxic (low to zero dissolved oxygen) conditions were measured in the two intensively monitored reaches for multiple weeks during summer. Two single-station stream metabolism models were used to calculate net ecosystem production in the two intensively monitored urban stream reaches. Results indicated that the reaches were heterotrophic, with respiration demands consuming more oxygen than what was produced through photosynthesis. Beaver ponds at all sites had a measurable effect on water quality, causing wider ranges in temperature and dissolved-oxygen conditions than would have occurred without ponding. That wider range (both spatially and temporally) might support a variety of aquatic organisms, but also is likely to increase the frequency of water-quality standard violations in those beaver-affected reaches. Any water-quality effects or standard violations associated with beaver dams and ponds, however, may be localized or transitory along the stream network. Restored stream reaches can attract beavers. Considering the potential for beaver colonization when designing habitat restoration plans will require evaluation of the potential water-quality changes associated with beaver dams and ponds alongside other desired physical changes.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 45.375° to 45.75° latitude; -123.5° to -122.5° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Cassandra D. Smith, Erin K. Leahy, Krista L. Jones, Stewart A. Rounds. 2025-09-30. Effects of beaver dams and ponds on water quality in urban streams of the Tualatin River Basin, northwestern Oregon. https://doi.org/10.3133/sir20255039d

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Evaluating the number of realizations (train-test splits) necessary to ensure robust estimates of conventional hydrothermal resource favorability using Monte Carlo cross-validation, the Great Basin, Western USA

Supervised machine learning approaches used to produce favorability maps in resource assessments commonly partition an input dataset into training and testing subsets (that is, through train-test splits). However, if a single split is not representative of underlying resource conditions, the resulting favorability map may be biased, particularly with sparse or heterogeneous datasets. To mitigate the potential for unrepresentative favorability maps, recent works by U.S. Geological Survey researchers have used Monte Carlo cross-validation to implement a large number ( n) of randomized train-test splits to produce n realizations. The realizations are then aggregated using cell-wise median predictions to produce the resulting final favorability map, recognizing that the median will remove extreme values that might have been estimated from a comparatively few unrepresentative realizations. Theoretically, the median prediction at every cell converges to a single estimate as n approaches infinity, and the question addressed herein is: How many realizations are necessary to get a robust estimate (that is, an estimate unaffected by additional realizations)? Therefore, convergence metrics are described to identify the number of train-test splits and realizations needed to make a reliable map using the data and supervised machine learning workflow for conventional hydrothermal resource assessment of the Great Basin of the Western United States. For this study, robust prediction occurs with n approximately equal to 600 realizations, and smaller ensembles (for example, n is approximately equal to 200 or even 100) may be suitable during preliminary or exploratory analyses. Although the resulting threshold numbers will vary depending on the data and modeling approach used, the convergence metrics proposed and applied herein are applicable to other supervised machine learning studies that use Monte Carlo cross-validation.

Scientific Investigations Report↗

Groundwater budget for the Portneuf River Basin, southeastern Idaho

The U.S. Geological Survey, in cooperation with the Idaho Department of Water Resources, developed the first groundwater budget for the upper Portneuf River Basin in southeastern Idaho, a tributary of the Snake River. A groundwater budget for the Portneuf River Basin supports water resource and administrative management decisions within the basin and for downstream users of the eastern Snake River Plain aquifer. The analysis quantifies inflows, outflows, and residuals for an aquifer system defined by the Idaho Department of Water Resources under three recent precipitation conditions: an average year (2016), a dry year (2021), and a wet year (2023). The budget was calculated for the basin and for two subbasins delineated by the U.S. Geological Survey streamgage Portneuf River at Topaz, Idaho (13073000): the above Topaz subbasin, which includes the Portneuf-Gem valley, and the below Topaz subbasin, which includes Marsh Valley. Aquifer inflows include mountain-front recharge; areal recharge; recharge from applied water, including recharge from irrigation, canal seepage, and effluent returns; groundwater flow into the basin; and reservoir seepage. Outflows include groundwater pumping for agricultural, municipal, and domestic uses; subsurface outflow through the Portneuf gap; and discharge to streams as base flow. Estimated annual inflows for the full basin ranged from 116,880 acre-feet in 2021 to 154,880 acre-feet in 2023, and outflows ranged from 132,190 acre-feet in 2016 to 158,490 acre-feet in 2023. Basinwide residuals, the change in storage plus uncertainty, were −2,410 acre-feet in 2016, −18,410 acre-feet in 2021, and −3,610 acre-feet in 2023, and each subbasin had a mixture of negative and positive residuals. These basinwide results, interpreted as change in storage plus water-budget uncertainty, indicate minor net losses that increase with dry conditions, consistent with well depth-to-water measurements indicating gradual multi-decadal declines. Patterns in subbasin residuals are driven by irrigation practices and surface-water management; for example, the above Topaz subbasin relies more on groundwater for irrigation, resulting in more negative residuals during dry years. In contrast, the below Topaz subbasin depends more on surface water, producing positive residuals during dry years because of irrigation losses and canal seepage. The analyses for both subbasins indicate decades-long groundwater declines, which agree with the overall negative residuals calculated. The largest sources of uncertainty include climate inputs (precipitation and evapotranspiration) and poorly constrained components such as groundwater inflow and tributary stream infiltration. These findings provide insight into how climatic variables and irrigation practices affect groundwater inflows and outflows within the Portneuf River Basin.

Idaho↗

World minerals outlook—Antimony, copper, graphite, niobium, potash, silicon, silver, and tungsten through 2030

Demand for mineral commodities continues to increase owing to rapid technological advancements and global economic growth. To support this increase in demand, information about current and near-term supplies of these mineral commodities is essential. Such data help evaluate the health and stability of global supply chains and protect against potential supply risks. Current production and production capacity data coupled with information regarding near-term expected changes (such as facility closures, planned expansions, or the completion of new mineral production projects) can provide insight into expected future market developments and expected available supply of mineral commodities. This report within the “World Minerals Outlook” series analyzes data for antimony, copper, natural graphite, niobium, potash, silicon metal, silver, and tungsten—eight mineral commodities listed in the 2025 List of Critical Minerals. World production data from 2019 through 2025, as well as estimated world capacity data from 2023 through 2025 were analyzed. Using these data, near-term (2026–2030) expected world capacities were estimated. For antimony, copper, niobium, silicon metal, silver, and tungsten, modest increases in production capacity of 4 to 10 percent were expected between 2025 and 2030, whereas capacities for natural graphite and potash were expected to increase by about 18 to 20 percent.

Scientific Investigations Report↗