USGS Science⌕ Search

SEARCH · USGS Science

Results for “Special Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 433 records · Page 24Linked to original sources
USGS2002

Eagle collapse center: Interpretation of evidence for late Cenozoic evaporite-related deformation in the Eagle River basin, Colorado

Evaporite tectonism resulted in deformation and collapse over an area of ~2500 km2 that is referred to as the Eagle collapse center. The collapse center includes much of the Eagle and Colorado River drainage basins between Vail, Dotsero, and McCoy, Colorado. The volume loss of evaporitic rocks by dissolution in the collapse center is estimated to be nearly 1700 km3 3 . Before ca. 10 Ma, Miocene basaltic flows partly covered an extensive, nearly horizontal, low-relief surface. Parts of this surface collapsed 1.3 km near the present-day Eagle and Colorado Rivers. Remnants of this surface outside the area of collapse, such as highlands of the White River uplift, the flank of the Gore Range, and Basalt Mountain, stand at elevations of 2.9–3.6 km. The high-standing Castle Peak basaltic cap, situated near the center of the Eagle collapse center, may not have collapsed, or collapsed little. The areas of collapse lie within or nearby known and inferred limits of the Pennsylvanian Eagle Valley Evaporite (mostly halite, gypsum, and anhydrite) that was deposited in the Central Colorado trough. Our geologic mapping and research in the Eagle collapse center delineate synclinal sags in the basaltic flows with amplitudes of 0.5–1 km, sinuous and discontinuous high-angle faults that cut basaltic flows, elongate grabens, evaporite-cored anticlines, and an ellipsoidal fault system that drops a 30 km X 10 km mountain block of younger strata into evaporite. Collapse as far as 20 km from the Colorado and Eagle Rivers suggests that the greater load on evaporite beneath surrounding highlands causes lateral flow of evaporite toward anticlinal crests in river valleys. Thus, gravity-driven evaporite flow and removal of evaporite by dissolution in groundwater and by subsequent discharge to surface waters combine to produce large-scale collapse. Although most evaporite tectonism post dates the basaltic flow capped surface, local angular unconformities under this surface record earlier, possibly Laramide evaporite tectonism, and overthickened post-evaporite red beds record some late Paleozoic evaporite deformation

Colorado↗
USGS2026

Hyperspectral narrowband imaging spectroscopy: A new paradigm for Earth observation

This editorial introduces the Special Issue entitled “Hyperspectral Narrowband Imaging Spectroscopy: A New Paradigm for Earth Observation” in the August 2026 issue of Photogrammetric Engineering & Remote Sensing (PE&RS), the flagship journal of the American Society for Photogrammetry and Remote Sensing (ASPRS). This volume represents the fourth dedicated hyperspectral special issue published in PE&RS, following earlier contributions by Thenkabail et al. (2025, 2024a, 2024b), and continues ASPRS’s commitment to advancing cutting‑edge imaging spectroscopy research and its applications across Earth system science. Remote sensing is undergoing one of the most profound transformations in its history. The emergence of hyperspectral narrowband (HNB) imaging spectroscopy data, capable of acquiring hundreds of contiguous, narrow spectral bands, has shifted the discipline from observing Earth in a handful of broad spectral windows to capturing continuous spectral signatures of the Planet. This transition marks a decisive break from the multispectral paradigm that has dominated satellite remote sensing for nearly five decades, driven by the advent of new orbital imaging spectrometers such as EnMAP, PRISMA, and NASA’s EMIT, and by the forthcoming Surface Biology and Geology (SBG) mission ((Pires Silva et al., 2026; Bourriz et al., 2025; Thenkabail et al., 2025; Chabrillat et al., 2024; Aneece et al., 2024; Dave et al., 2024; Thenkabail et al., 2024a; Thenkabail et al., 2024b; Thenkabail, 2024a; Thenkabail, 2024b; Thompson et al., 2022; Kokaly et al., 2022; Aneece & Thenkabail, 2022; Cawse Nicholson et al., 2021; Guanter et al., 2021; Vangi et al., 2021; Thenkabail et al., 2021). These missions (e.g., Table 1) deliver unprecedented spectral fidelity, improved signal to noise ratios, and global coverage capabilities, enabling a new era of quantitative, spectroscopy based Earth observation. Where multispectral broadbands (MBBs) provide only a few discrete measurements along the electromagnetic spectrum, HNB systems deliver rich, diagnostic information that enables scientists to characterize Earth’s surface with unprecedented biochemical, biophysical, and structural detail (Figure 1a, 1b). The implications for environmental monitoring, agriculture, water resources, and mineral exploration are profound. Several overarching themes emerge: • Spectral fidelity matters. The ability to preserve subtle absorption features is essential for mineral mapping, vegetation trait retrieval, and biochemical modeling. • AI and deep learning are indispensable. From destriping to classification, modern analytics must be scalable, label‑efficient, and capable of exploiting the full spectral–spatial richness of HNB data. • Physics‑based and data‑driven approaches must converge. Radiative transfer models such as PROSAIL, enhanced with localized soil parameterizations, remain foundational for biophysical retrievals and model‑based inference. • Dimensionality reduction and feature extraction are critical. Techniques such as L1‑ISOMAP demonstrate that intelligent manifold learning can unlock the structure of fused, high‑dimensional datasets. • Next‑generation architectures must be interactive and multimodal. ICTNet exemplifies the future of hyperspectral classification: hybrid, synergistic, and capable of modeling both local textures and global spectral dependencies.

Photogrammetric Engineering and Remote Sensing (PE↗
USGS2014

A previously unrecognized path of early Holocene base flow and elevated discharge from Lake Minong to Lake Chippewa across eastern Upper Michigan

It has long been hypothesized that flux of fresh meltwater from glacial Lake Minong in North America's Superior Basin to the North Atlantic Ocean triggered rapid climatic shifts during the early Holocene. The spatial context of recent support for this idea demands a reevaluation of the exit point of meltwater from the Superior Basin. We used ground penetrating radar (GPR), foundation borings from six highway bridges, a GIS model of surface topography, geologic maps, U.S. Department of Agriculture–Natural Resources Conservation Service soils maps, and well logs to investigate the possible linkage of Lake Minong with Lake Chippewa in the Lake Michigan Basin across eastern Upper Michigan. GPR suggests that a connecting channel lies buried beneath the present interlake divide at Danaher. A single optical age hints that the channel aggraded to 225 m as elevated receipt of Lake Agassiz meltwater in the Superior Basin began to wane <10.6 ka. The large supply of sediment required to accommodate aggradation was immediately available at the channel's edge in the littoral shelves of abandoned Lake Algonquin and in distal parts of post-Algonquin fans. As discharge decreased further, the aggraded channel floor was quickly breached and interbasin flow to Lake Chippewa was restored. Basal radiocarbon ages on wood from small lakes along the discharge path and a GIS model of Minong's shoreline are consistent with another transgression of Minong after ca. 9.5 ka. At the peak of the latter transgression, the southeastern rim of the Superior Basin (Nadoway Drift Barrier) failed, ending Lake Minong. Upon Minong's final drop, aggradational sediments were deposited at Danaher, infilling the prior breach.

Michigan↗
USGS2004

Seismic history of the Middle America subduction zone along El Salvador, Guatemala, and Chiapas, Mexico: 1526–2000

We present a catalog of subduction zone earthquakes along the Pacific coast from central El Salvador to eastern Chiapas, Mexico, from 1526 to 2000. We estimate that the catalog is complete since 1690 for M S ≥7.4 thrust events and M ≥ 7.4 normal-faulting events within the upper 60 km of the down-going slab. New intensity maps were constructed for the 27 earthquakes since 1690, using mostly primary data sources. By calibrating with recent events we find that the long axis of the (MM) VII intensity contour for such large earthquakes well approximates the length and location of rupture along the subduction zone and can thus be used to estimate the locations and magnitudes of older events. The section from western El Salvador to Chiapas appears to have ruptured completely in a series of four to five earthquakes during each of the periods 1902–1915, 1743–1776, and possibly 1565–1577. Earthquakes of M W 7.75 ± 0.3 have caused major damage along the 200 km long section from San Salvador to Guatemala City every 71 ± 17 yr, apparently since at least 1575. Although the January 2001 El Salvador earthquake caused damage within part of this zone, no major thrust earthquake has occurred there since at least 1915. We find that much of this section has been relatively quiescent for moderate earthquakes shallower that 50 km since at least 1963. The conditional probability that an earthquake of M W 7.75 ± 0.3 will occur at this location in the next 20 yr is estimated at 50% (±30%).

Chiapas↗
USGS2023

Construction and modification of debris-flow alluvial fans as captured in the geomorphic and sedimentary record: Examples from the western Sangre de Cristo Mountains, south-central Colorado

Debris-flow alluvial fans are iconic features of dynamic landscapes and are hypothesized to record tectonic and climatic change. Here, we highlight their complex formation and evolution through an exemplary suite of Quaternary debris-flow alluvial fans emanating from the western range front of the Sangre de Cristo Mountains in south-central Colorado, USA. To evaluate the constructive and modifying processes that produce fan form and the associated sedimentary signatures, we applied a combined geomorphologic and sedimentologic approach using sedimentary facies analysis, soils mapping, high-resolution topographic data, and luminescence geochronology to document timing of fan construction and modification. We explored two subsets of fans in the study area: a southern set sourced from the extensively glaciated drainages of the Blanca Peak massif, and a northern set from the unglaciated drainages south of Great Sand Dunes National Park. Both sets of fans have: (1) active and successively abandoned surfaces that show evolving degradation of primary features through modification by secondary processes, (2) associated facies that display distinct characteristics representative of primary depositional and secondary modifying sedimentary processes, and (3) evidence of primary debris flow with subsequent modification by secondary processes. We found that surface geomorphology and facies assemblages in exposed alluvial-fan deposits represent sediment transport processes on both active and abandoned lobes. The link between fan surface morphologies and the sedimentary facies of their deposits provides a basis for an evolutionary process–based interpretation of debris-flow alluvial-fan geomorphology and provides a better understanding of complexities in buried paleosurfaces (intraformational progressive unconformities), surficial deformation, and landform development as recorded in debris-flow fan deposits in the sedimentary record.

Colorado↗
USGS2003

Phanerozoic strike-slip faulting in the continental interior platform of the United States: examples from the Laramide Orogen, Midcontinent, and Ancestral Rocky Mountains

The continental interior platform of the United States is that part of the North American craton where a thin veneer of Phanerozoic strata covers Precambrian crystalline basement. N- to NE-trending and W- to NW-trending fault zones, formed initially by Proterozoic/Cambrian rifting, break the crust of the platform into rectilinear blocks. These zones were reactivated during the Phanerozoic, most notably in the late Palaeozoic Ancestral Rockies event and the Mesozoic-Cenozoic Laramide orogeny — some remain active today. Dip-slip reactivation can be readily recognized in cross section by offset stratigraphic horizons and monoclinal fault-propagation folds. Strike-slip displacement is hard to document because of poor exposure. Though offset palaeochannels, horizontal slip lineations, and strain at fault bends locally demonstrate strike-slip offset, most reports of strike-slip movements for interior-platform faults are based on occurrence of map-view belts of en echelon faults and anticlines. Each belt overlies a basement-penetrating master fault, which typically splays upwards into a flower structure. In general, both strike-slip and dip-slip components of displacement occur in the same fault zone, so some belts of en echelon structures occur on the flanks of monoclinal folds. Thus, strike-slip displacement represents the lateral component of oblique fault reactivation; dip-slip and strike-slip components are the same order of magnitude (tens of metres to tens of kilometres). Effectively, faults with strike-slip components of displacement act as transfers accommodating jostling of rectilinear crustal blocks. In this context, the sense of slip on an individual strike-slip fault depends on block geometry, not necessarily on the trajectory of regional σ 1 . Strike-slip faulting in the North American interior differs markedly from that of southern and central Eurasia, possibly because of a contrast in lithosphere strength. Weak Eurasia strained significantly during the Alpine-Himalayan collision, forcing crustal blocks to undergo significant lateral escape. The strong North American craton strained relatively little during collisional-convergent orogeny, so crustal blocks underwent relatively small displacements.

Geological Society Special Publication↗
USGS2006

The role of sandstone in the development of an Ozark karst system, south-central Missouri

Cave, spring, and sinkhole development in the Ozarks of south-central Missouri is placed in a geologic framework through detailed geologic mapping. Geologic mapping shows that initial dissolution and inception of cave development is concentrated just beneath sandstone beds within Upper Cambrian and Lower Ordovician dolostone. Although rocks of the Ozarks have systematic and pervasive vertical joints, the development of karst conduits is controlled by bedding planes and stratigraphic variability. In the Salem Plateau of south-central Missouri, sinkholes occur in the lower part of the Ordovician Roubidoux Formation, where sinkholes are rimmed with and contain sandstone that has collapsed into voids in the underlying Ordovician Gasconade Dolomite. Cave diving by the Ozark Cave Diving Alliance into Alley Spring, a large (average flow 3.7 m3/s) spring along the Jacks Fork in the Ozark National Scenic Riverways, shows that although the spring discharges from the middle part of the Gasconade, the source of water is a cave passage just beneath the Gunter Sandstone Member of the Gasconade Dolomite. Artesian conditions cause the upward movement of groundwater from cavernous dolostone beneath the sandstone aquitards to the large springs. We hypothesize that sandstone, which is largely impermeable due to silica cementation, acts as a confining unit where hydraulic pressure, combined with mixing of water of differing chemistry, increases dissolution in the underlying dolostone beds. ?? 2006 Geological Society of America.

Special Paper of the Geological Society of America↗
USGS1960

Geology and ground-water resources of the lower Little Bighorn River Valley, Big Horn County, Montana, with special reference to the drainage of waterlogged lands

The lower Little Bighorn River valley, Montana, is in the unglaciated part of the Missouri Plateau section of the Great Plains physiographic province. The river and its principal tributaries rise in the Bighorn Mountains, and the confluence of this northward-flowing stream with the Bighorn River is near the east edge of Hardin, Mont. The normal annual precipitation ranges from about 12 inches in the northern part of the area to 15 inches in the southern part. The economy of the area is founded principally on farming, much of the low-lying land adjacent to the river being irrigated. The irrigated land is within the Crow Indian Reservation, although a part is privately owned. The bedrock formations exposed in the area are of Cretaceous age and include the Parkman sandstone, Claggett shale, Eagle sandstone, Telegraph Creek shale, and Cody shale. The Cloverly formation, Tensleep sandstone, and Madison limestone, which underlie but are not exposed in the area, and the Parkman sandstone in the southern half of the area appear to be the principal bedrock aquifers. All except the Parkman lie at depths ranging from a few feet to several thousand feet, and all appear to be capable of yielding water in commercial quantities. Some of the other formations arc capable of yielding enough water for domestic and stock needs. The river alluvium of Recent age and the Pleistocene terrace deposits are the principal unconsolidated formations in the area with respect to water supply and drainage. Wells yielding as much as 100 gallons per minute may be developed in favorable areas. Pumping tests reveal that the transmissibility of the coarser unconsolidated materials probably ranges from about 15,000 to 30,000 gallons per day per foot. Two tests of the Parkman sandstone showed transmissibilities of 6,000 and 20,000 gallons per day per foot. Although a test of the Cloverly formation showed a transmissibility of only 3,000 gallons per day per foot, the high artesian pressure--80 pounds per square inch at the land surface--in the Cloverly caused the tested well to yield about 200 gallons per minute by natural flow; this is greater than the yield of any other single well in the area. Textural properties were compared with the hydraulic properties determined by laboratory tests to show the relation between different types of waterbearing materials. Materials classified as heavy soils-normally somewhat dense and impervious-had an average permeability of 7.2 gallons per day per square foot, which was more than expected. One sample of very coarse alluvial material had a permeability of 6,000 gallons per day per square foot. The depth to water beneath irrigation units was mapped, thus showing the waterlogged areas. Waterlogging is not a serious problem where the water table is more than 6 feet below the land surface. For the drainage studies the unconsolidated deposits are classified in two zones-coarse-grained sediments resting on the relatively impermeable bedrock floor and overlying fine-grained sediments which extend to the land surface. The transmissibility of the coarse-sediment zone generally is many times greater than that of the fine-sediment zone. Because in many places drains could not be economically dug deep enough to enter the coarse zone, the study of the effectiveness of drainage completed in the fine zone received much attention. The studies showed that, despite a considerable thickness of fine-grained sediments between the bottom of the drain and the top of the coarse zone, drainage ditches frequently were effective in relieving waterlogging of fields nearby. Pilot relief wells installed in existing drains showed that the effectiveness of some drains could be increased appreciably by installing a series of relief wells. Records of fluctuations of water levels in 196 observation wells and water-level contour maps were studied to show the principal areas of recharge and discharge in the irrigable areas.

Montana↗
USGS2015

Geologic framework and evidence for neotectonism in the epicentral area of the 2011 Mineral, Virginia, earthquake

The epicenters of the main shock and associated aftershocks of the 2011 moment magnitude, M w 5.8 Mineral, Virginia (USA), earthquake, and the updip projection of the possible fault plane that triggered the quakes, are contained in the areas of 2 adjoining 7.5′ quadrangles in the central Virginia Piedmont. These quadrangles have therefore been the focus of concentrated geologic study in the form of bedrock and surficial mapping and near-surface trenching in order to identify potential seismogenic structures. Bedrock mapping has outlined a series of northeast-southwest–trending lithologic belts that include the Ordovician Chopawamsic and Quantico Formations, the narrow neck of the Late Ordovician Ellisville pluton, and mélange zone III of the Mine Run Complex. The region was affected by at least two ductile deformational events, one in the early Paleozoic that was broadly synchronous with the intrusion of the pluton, and one later in the Paleozoic. The earlier deformation produced the Quantico synclinorium and other regional folds, and the later deformation produced faults with associated high-strain zones. Two of these faults have been trenched at their intersection along the east-dipping eastern contact of the Ellisville neck, near where the causative fault for the earthquake projects to the surface. The trenches have exposed abundant evidence of post-Paleozoic fracturing and faulting, including brecciated quartz-tourmaline veins, slickensided thrust and strike-slip faults, and clay-filled fractures. Fluvial and colluvial gravels that overlie these brittle structures have yielded optically stimulated luminescence ages ranging from ca. 27 to 10 ka. These structures are likely representative of surface features associated with Quaternary earthquakes in the Central Virginia seismic zone.

GSA Special Papers↗
USGS2008

A mantle plume beneath California? The mid-Miocene Lovejoy Flood Basalt, northern California

The Lovejoy basalt represents the largest eruptive unit identified in California, and its age, volume, and chemistry indicate a genetic affinity with the Columbia River Basalt Group and its associated mantle-plume activity. Recent field mapping, geochemical analyses, and radiometric dating suggest that the Lovejoy basalt erupted during the mid-Miocene from a fissure at Thompson Peak, south of Susanville, California. The Lovejoy flowed through a paleovalley across the northern end of the Sierra Nevada to the Sacramento Valley, a distance of 240 km. Approximately 150 km 3 of basalt were erupted over a span of only a few centuries. Our age dates for the Lovejoy basalt cluster are near 15.4 Ma and suggest that it is coeval with the 16.1-15.0 Ma Imnaha and Grande Ronde flows of the Columbia River Basalt Group. Our new mapping and age dating support the interpretation that the Lovejoy basalt erupted in a forearc position relative to the ancestral Cascades arc, in contrast with the Columbia River Basalt Group, which erupted in a backarc position. The arc front shifted trenchward into the Sierran block after 15.4 Ma. However, the Lovejoy basalt appears to be unrelated to volcanism of the predominantly calc-alkaline Cascade arc; instead, the Lovejoy is broadly tholeiitic, with trace-element characteristics similar to the Columbia River Basalt Group. Association of the Lovejoy basalt with mid-Miocene flood basalt volcanism has considerable implications for North American plume dynamics and strengthens the thermal "point source" explanation, as provided by the mantle-plume hypothesis. Alternatives to the plume hypothesis usually call upon lithosphere-scale cracks to control magmatic migrations in the Yellowstone-Columbia River basalt region. However, it is difficult to imagine a lithosphere-scale flaw that crosses Precambrian basement and accreted terranes to reach the Sierra microplate, where the Lovejoy is located. Therefore, we propose that the Lovejoy represents a rapid migration of plume-head material, at ??20 cm/yr to the southwest, a direction not previously recognized. ?? 2008 The Geological Society of America.

Special Paper of the Geological Society of America↗
USGS1986

The Breeding Bird Survey: Its first fifteen years, 1965-1979

The Breeding Bird Survey (BBS) is an ongoing cooperative program sponsored jointly by the U.S. Fish and Wildife Service and the Canadian Wildlife Service. Its main purpose is to estimate population trends of the many species of birds that nest in North America north of Mexico and that migrate across international boundaries. This survey provides information, both locally by ecological or political regions and on a continental scale, on (1) short-term population changes that can be correlated with specific weather incidents, (2) recovery periods following catastrophic declines, (3) normal year-to-year variations, (4) long-term population trends, and (5) invasions of exotics. The BBS also permits detailed computer mapping of relative abundance of each species, either year by year to show changes in distribution and relative abundance, or the average over a period of years. It provides base-line data with which more intensive local studies can be compared. For biogeographic studies it provides uniform sampling of bird populations by major physiographic regions across the continent. In conjunction with the Audubon Christmas Bird Count, it permits comparison of summer and winter distribution of species that winter in the United States. Most species of North American birds migrate across international boundaries, especially those shared with Canada, Mexico, and the Soviet Union. As part of our responsibility under treaties with these nations, the U.S. Fish and Wildlife Service has developed the BBS to monitor avian population changes so that any adverse trends can be detected early. This provides the opportunity to determine the reasons for any increase or decrease, to define geographic areas in which changes are greatest, to study correlations between avian population changes and land-use changes, and to make recommendations for controlling undesirable bird population trends. For example, the BBS can be used to detect and estimate the extent of losses resulting from widespread use of pesticides, and to reveal whether major population changes of a given species (e.g., Dickcissel) in certain States are related to a continental decline or are merely a result of population shifts within the breeding range. Effects of urban and suburban expansion are often reflected in the loss of forest interior birds. Population trends for 230 species as well as several avian genera and families are discussed and graphed in this report. For most of these species, regional and well as continental trends are shown. The three major regions discussed are the Eastern, Central, and Western, bounded by the Mississippi River and the eastern base of the Rocky Mountains. Additional graphs for certain States or physiographic regions are included for selected species of special interest. The following paragraphs summarize general trends in the major bird families. The native herons in general are maintaining their populations, whereas the exotic Cattle Egret continues its geographic spread and its steady increase. Waterfowl as a group are stable or increasing. Although most widespread species of hawks are on the increase, the rarer species show evidence of decline. Among the gallinaceous birds, the greatest change was a sharp drop in Northern Bobwhite as a result of the exceptionally cold winters of 1976-77 and 1977-78 in the Ohio Valley and the Middle Atlantic States. Killdeer populations, except for a minor decline during these two winters, showed strong increases except in the West. American Woodcock were poorly sampled by the BBS because they were relatively inactive during daylight. Common Snipe and the other common shorebirds that nest in the United States and southern Canada exhibited stable or increasing populations, especially in the Eastern and Central regions. Herring Gull counts varied dramatically and irregularly from year to year. Laughing Gulls increased along the Atlantic coast and Franklin's Gulls declined in the interior of the continen

Resource Publication↗
USGS2019

Lava lake thermal pattern classification using self organizing maps and relationships to eruption processes at Kilauea Volcano, Hawaii

Kīlauea Volcano’s active summit lava lake poses hazards to downwind residents and over 1.6 million Hawai‘i Volcanoes National Park visitors each year. The lava lake surface is dynamic; crustal plates separated by incandescent cracks move across the lake as magma circulates below. We hypothesize that these dynamic thermal patterns are related to changes in other volcanic processes, such that sequences of thermal images may provide information about eruption parameters that are sometimes difficult to measure. The ability to learn about current gas emissions and seismic activity from a remote thermal time-lapse camera would be beneficial when conditions are too hazardous for field measurements. We apply a machine learning algorithm called self-organizing maps (SOM) to thermal infrared time-lapse images of the lava lake collected hourly over 23 April – 21 October 2013 (n=4354). The SOM algorithm can take thousands of seemingly different images, each representing the spatial distribution of relative temperature across the lava lake surface, and group them into clusters based on their similarities. We then relate the resulting clusters to sulfur dioxide emissions and seismic tremor to characterize ties between the SOM classification and different emplacement conditions. The SOM classification results are highly sensitive to the normalization method applied to the input images. The standard pixel-by-pixel normalization method yields a cluster of images defined by the highest observed SO2 emission levels, elevated surface temperatures, and a high proportion of cracks between crustal plates. When lava lake surface patterns are isolated by minimizing the effect of temperature variation between images, relationships with seismic tremor activity emerge, revealing an “intense spatter” cluster, characterized by unstable, broken-up crustal plate patterns on the lava lake surface. This proof of concept study provides a basis for extending the SOM classification method to hazard forecasting and real-time volcanic monitoring applications, as well as comparative studies at other lava lakes.

Hawaii↗
USGS2015

Bathymetric and velocimetric surveys at highway bridges crossing the Missouri and Mississippi Rivers on the periphery of Missouri, June 2014

Bathymetric and velocimetric data were collected by the U.S. Geological Survey, in cooperation with the Missouri Department of Transportation, in the vicinity of 8 bridges at 7 highway crossings of the Missouri and Mississippi Rivers on the periphery of Missouri from June 3 to 11, 2014. A multibeam echosounder mapping system was used to obtain channel-bed elevations for river reaches ranging from 1,525 to 1,640 feet longitudinally, and extending laterally across the active channel from bank to bank during low- to moderate-flow conditions. These bathymetric surveys indicate the channel conditions at the time of the surveys and provide characteristics of scour holes that may be useful in the development of predictive guidelines or equations for scour holes. These data also may be useful to the Missouri Department of Transportation as a low- to moderate-flow comparison to help assess the bridges for stability and integrity issues with respect to bridge scour during floods. Bathymetric data were collected around every pier that was in water, except those at the edge of water or in very shallow water (less than about 6 feet). Scour holes were observed at most piers for which bathymetry could be obtained, except at piers on channel banks, on exposed bedrock outcrops, or surrounded by riprap. Scour holes observed at the surveyed bridges were examined with respect to depth and shape, and the effects of riprap blankets or other rock near the piers. The presence of riprap blankets, depth of fluvial material on top of a riprap blanket, and alignment to flow had a substantial effect on the size of the scour hole observed for a given pier. Piers that were surrounded by riprap blankets had scour holes that were substantially smaller (to non-existent) compared to piers at which no rock or riprap was present. Although exposure of parts of foundational support elements was observed at several piers, at most sites the exposure likely can be considered minimal compared to the overall substructure that remains buried in channel-bed material; however, there were several notable exceptions where the bed material thickness between the bottom of the scour hole and bedrock was less than 6 feet. Such substantial exposure of usually buried substructural elements may warrant special observation in future flood events, even when designed to be exposed. Previous bathymetric surveys had been done at both of the sites on the Missouri River and one of the sites on the Mississippi River examined in this study. Comparisons between bathymetric surfaces from the previous surveys during the 2011 flood and those of this study generally indicate that there was an increase in the elevation of the channel bed at these sites that likely was caused by a substantial decrease in discharge and water-surface elevation compared to the 2011 surveys. However, the scour holes observed at these sites were either the same size or larger in 2014 compared to the 2011 surveys, indicating that the flow condition is not the sole variable in the determination of the size of scour holes, and that local velocity and depth also are critical variables, as indicated by predictive pier scour equations.

Mississippi River, Missouri River↗
USGS2018

Slope failure and mass transport processes along the Queen Charlotte Fault Zone, western British Columbia

Multibeam echosounder (MBES) images, 3.5 kHz seismic-reflection profiles and piston cores obtained along the southern Queen Charlotte Fault Zone are used to map and date mass-wasting events at this transform margin – a seismically active boundary that separates the Pacific Plate from the North American Plate. Whereas the upper continental slope adjacent to and east (upslope) of the fault zone offshore of the Haida Gwaii is heavily gullied, few large-sized submarine landslides in this area are observed in the MBES images. However, smaller submarine seafloor slides exist locally in areas where fluid flow appears to be occurring and large seafloor slides have recently been detected at the base of the steep continental slope just above its contact with the abyssal plain on the Queen Charlotte Terrace. In addition, along the subtle slope re-entrant area offshore of the Dixon Entrance shelf bathymetric data suggest that extensive mass wasting has occurred in the vicinity of an active mud volcano venting gas. We surmise that the relative lack of submarine slides along the upper slope in close proximity to the Queen Charlotte Fault Zone may be the result of seismic strengthening (compaction and cohesion) of a sediment-starved shelf and slope through multiple seismic events.

British Columbia↗
USGS1998

Geology of the Sierra de Fiambala, northwestern Argentina: Implications for Early Palaeozoic Andean tectonics

Field mapping in conjunction with structural, metamorphic, and geochronological data document the tectono-thermal history of exhumed deep crustal rocks in the Sierra de Fiambalá, NW Argentina. The range consists of two structural blocks distinguished by different metasedimentary sequences and different grades of metamorphism. Orthogneiss and paragneiss in the northern structural block may have a Precambrian history. Greenschist- to amphibolite-facies metamorphism, intrusion, and injection migmatization affected all rocks at 540–550 Ma. A subsequent event in the Late Cambrian to Ordovician ( c. 515 to 470 Ma) involved amphibolite- to granulite-facies metamorphism, mafic intrusion, and deformation, followed by cooling through mid-Palaeozoic time. The emplacement of Carboniferous (325–350 Ma) post-tectonic granites caused reheating and retrogression that was strongest toward the northeast part of the range. The Cambrian, Ordovician, and Carboniferous events in the Sierra de Fiambalá were of regional extent as indicated by temporal correlations with events reported for other deep crustal rocks of the northern Sierras Pampeanas. Correlations between periods of intrusion and high-grade metamorphism in the northern Sierras Pampeanas and volcanic-sedimentary events in the adjacent supracrustal exposures confirm that rocks in the northern Sierras Pampeanas formed at deep (10–25 km) structural levels in the early Palaeozoic continental margin of Gondwana.

Geological Society Special Publication↗
USGS2014

Subsurface geologic features of the 2011 central Virginia earthquakes revealed by airborne geophysics

Characterizing geologic features associated with major earthquakes provides insights into mechanisms contributing to fault slip and assists evaluation of seismic hazard. We use high-resolution airborne geophysical data combined with ground sample measurements to image subsurface geologic features associated with the 2011 moment magnitude (M w ) 5.8 central Virginia (USA) intraplate earthquake and its aftershocks. Geologic mapping and magnetic data analyses suggest that the earthquake occurred near a complex juncture of geologic contacts. These contacts also intersect a >60-km-long linear gravity gradient. Distal aftershocks occurred in tight, ~1-km-wide clusters near other obliquely oriented contacts that intersect gravity gradients, in contrast to more linearly distributed seismicity observed at other seismic zones. These data and corresponding models suggest that local density contrasts (manifested as gravity gradients) modified the nearby stress regime in a manner favoring failure. However, along those gradients seismic activity is localized near structural complexities, suggesting a significant contribution from variations in associated rock characteristics such as rheological weakness and/or rock permeability, which may be enhanced in those areas. Regional magnetic data show a broader bend in geologic structures within the Central Virginia seismic zone, suggesting that seismic activity may also be enhanced in other nearby areas with locally increased rheological weaknesses and/or rock permeability. In contrast, away from the M w 5.8 epicenter, geophysical lineaments are nearly continuous for tens of kilometers, especially toward the northeast. Continuity of associated geologic structures probably contributed to efficient propagation of seismic energy in that direction, consistent with moderate to high levels of damage from Louisa County to Washington, D.C., and neighboring communities.

Virginia↗
USGS2007

The restricted gemuk group: A triassic to lower cretaceous succession in southwestern Alaska

New data from an Upper Triassic to Lower Cretaceous deep marine succession-the herein reinstated and restricted Gemuk Group-provide a vital piece of the puzzle for unraveling southwestern Alaska's tectonic history. First defined by Cady et al. in 1955, the Gemuk Group soon became a regional catchall unit that ended up as part of at least four different terranes. In this paper we provide the first new data in nearly half a century from the Gemuk Group in the original type area in Taylor Mountains quadrangle and from contiguous rocks to the north in Sleetmute quadrangle. Discontinuous exposure, hints of complex structure, the reconnaissance level of our mapping, and spotty age constraints together permit definition of only a rough stratigraphy. The restricted Gemuk Group is at least 2250 m thick, and could easily be at least twice as thick. The age range of the restricted Gemuk Group is tightened on the basis of ten radiolarian ages, two new bivalve ages, one conodont age, two U-Pb zircon ages on tuff, and U-Pb ages of 110 detrital zircons from two sandstones. The Triassic part of the restricted Gemuk Group, which consists of intermediate pillow lavas interbedded with siltstone, chert, and rare limestone, produced radiolarians, bivalves, and conodonts of Carnian and Norian ages. The Jurassic part appears to be mostly siltstone and chert, and yielded radiolarians of Hettangian- Sinemurian, Pliensbachian-Toarcian, and Oxfordian ages. Two tuffs near the Jurassic-Cretaceous boundary record nearby arc volcanism: one at 146 Ma is interbedded with red and green siltstone, and a second at ca. 137 Ma is interbedded with graywacke turbidites. Graywacke appears to be the dominant rock type in the LowerCretaceous part of the restricted Gemuk Group. Detrital zircon analyses were performed on two sandstone samples using SHRIMP. One sandstone yielded a dominant age cluster of 133-180 Ma; the oldest grain is only 316 Ma. The second sample is dominated by zircons of 130-154 Ma; the oldest grain is 292 Ma. The youngest zircons are probably not much older than the sandstone itself. Point counts of restricted Gemuk Group sandstones yield average ratios of 24/29/47 for Q/F/L, 15/83/2 for Ls/Lv/Lm, and 41/48/11 for Qm/P/K. In the field, sandstones of the restricted Gemuk Group are not easily distinguished from sandstones of the overlying Upper Cretaceous turbidite-dominated Kuskokwim Group. Petrographically, however, the restricted Gemuk Group has modal K-feldspar, whereas the Kuskokwim Group generally does not (average Qm/P/K of 64/36/0). Some K-feldspar-bearing graywacke that was previously mapped as Kuskokwim Group (Cady et al., 1955) is here reassigned to the restricted Gemuk Group. Major- and trace element geochemistry of shales from the restricted Gemuk Group and the Kuskokwim Group show distinct differences. The chemical index of alteration (CIA) is distinctly higher forshales of the Kuskokwim Group than for those of the restricted Gemuk Group, suggesting more intense weathering during deposition of the Kuskokwim Group. The restricted Gemuk Group represents an estimated 90-100 m.y. of deep-water sedimentation, first accompanied by submarine volcanism and later by nearby explosive arc activity. Two hypotheses are presented for the tectonic setting. One model that needs additional testing is that the restricted Gemuk Group consists of imbricated oceanic plate stratigraphy. Based on available information, our preferred model is that it was deposited in a back-arc, intra-arc, or forearc basin that was subsequently deformed. The terrane affinity of the restricted Gemuk Group is uncertain. The rocks of this area were formerly assigned to the Hagemeister subterrane of the Togiak terrane-a Late Triassic to Early Cretaceous arc-but our data show this to be a poor match. None of the other possibilities (e.g., Nukluk and Tikchik subterranes of the Goodnews terrane) is viable; hence, the terrane subdivision and distribution in southwestern Alaska may need

Special Paper of the Geological Society of America↗
USGS2011

Evaluation of landslide monitoring in the Polish Carpathians

In response to the June 15, 2010 request from the Polish Geological Institute (PGI) to the U.S. Geological Survey (USGS) for assistance and advice regarding real-time landslide monitoring, landslide specialists from the USGS Landslide Hazard Program visited PGI headquarters and field sites in September 2010. During our visit we became familiar with characteristics of landslides in the Polish Carpathians, reviewed PGI monitoring techniques, and assessed needs for monitoring at recently activated landslides. Visits to several landslides that are monitored by PGI (the Just, Hańczowa, Szymbark, Siercza and Łasńica landslides) revealed that current data collection (monthly GPS and inclinometer surveys, hourly piezometers readings) is generally sufficient for collecting basic information about landslide displacement, depth, and groundwater conditions. Large landslides are typically hydrologically complex, and we would expect such complexity in Carpathian landslides, given the alternating shale and sandstone stratigraphy and complex geologic structures of the flysch bedrock. Consequently groundwater observations could be improved by installing several piezometers that sample the basal shear zone of each landslide being monitored by PGI. These could be supplemented by additional piezometers at shallower depths to help clarify general flow directions and hydraulic gradients. Remedial works at Hańczowa make the landslide unsuitable for monitoring as part of an early warning network. Monitoring there should focus on continued performance of the remedial works. Our suggestions for new monitoring at recently activated landslides are summarized in table 1. Displacement monitoring using extensometers and (or) GPS is a high priority at Kłodne, Łaśnica, Łazki, and Siedloki. Geomorphologic mapping of active surface features (scarps, cracks, shear zones, folds, and thrusts) in sufficient detail to reveal the kinematics of each landslide would greatly help in planning subsurface exploration and monitoring. Mapping should take advantage of existing and future airborne lidar data sets of specific areas, where available. Borehole inclinometers and piezometers would complete the basic monitoring package for these landslides. The landslide at Kłodne may be well suited for more detailed monitoring for landslide process research, although research opportunities exist at the other landslides as well. The landslide near Siedloki may be a good candidate for terrestrial laser scanning (TLS). Tandem streamflow gages upstream and downstream from the Siedloki landslide, or laser distance meters to monitor advancement of the toe, may be needed to provide warning of stream blockage of Potok Milowski. A real-time warning system specifically for the Łazki landslide might be considered due to potential concerns about catastrophic movement into Międzybrodzie Reservoir. Challenges associated with the establishment of a complete real-time monitoring and early warning system are far greater than just the technical and logistical aspects of installing remote monitoring systems at a large number of landslides. Long-term maintenance of a landslide monitoring network will involve considerable effort and expense as sensors break-down from exposure to weather, landslide movement, and harsh underground environmental conditions. Once PGI&rsquo;s planned pilot network of 10-20 monitored landslides is operating, a period of observation and analysis will be needed to establish appropriate alert levels and criteria for issuing alerts and warnings. Simultaneously, discussions with authorities will be needed to develop action plans for responding to landslide notifications and (or) warnings. Public resistance to landslide warnings and mandated evacuations may be high given the low historical incidence of fatalities and injuries resulting from Carpathian landslides and the small potential for warnings to reduce landslide damage to homes and land. Careful weighing of purpose, advantages, and costs of a large-scale monitoring and early warning program is needed early in the planning process and should be revisited regularly throughout pilot and final implementation. In this report, we present a generic plan for monitoring of a hypothetical Carpathian landslide that illustrates how our suggestions for each of the specific landslides could be implemented. The plan includes basic pore pressure, displacement, and weather monitoring, along with supplemental monitoring for special conditions at specific landslides. Table 2 summarizes the overall approach and basic equipment and software requirements.

Open-File Report↗