USGS ScienceSearch

USGS · 70035606

The restricted gemuk group: A triassic to lower cretaceous succession in southwestern Alaska

Abstract

New data from an Upper Triassic to Lower Cretaceous deep marine succession-the herein reinstated and restricted Gemuk Group-provide a vital piece of the puzzle for unraveling southwestern Alaska's tectonic history. First defined by Cady et al. in 1955, the Gemuk Group soon became a regional catchall unit that ended up as part of at least four different terranes. In this paper we provide the first new data in nearly half a century from the Gemuk Group in the original type area in Taylor Mountains quadrangle and from contiguous rocks to the north in Sleetmute quadrangle. Discontinuous exposure, hints of complex structure, the reconnaissance level of our mapping, and spotty age constraints together permit definition of only a rough stratigraphy. The restricted Gemuk Group is at least 2250 m thick, and could easily be at least twice as thick. The age range of the restricted Gemuk Group is tightened on the basis of ten radiolarian ages, two new bivalve ages, one conodont age, two U-Pb zircon ages on tuff, and U-Pb ages of 110 detrital zircons from two sandstones. The Triassic part of the restricted Gemuk Group, which consists of intermediate pillow lavas interbedded with siltstone, chert, and rare limestone, produced radiolarians, bivalves, and conodonts of Carnian and Norian ages. The Jurassic part appears to be mostly siltstone and chert, and yielded radiolarians of Hettangian- Sinemurian, Pliensbachian-Toarcian, and Oxfordian ages. Two tuffs near the Jurassic-Cretaceous boundary record nearby arc volcanism: one at 146 Ma is interbedded with red and green siltstone, and a second at ca. 137 Ma is interbedded with graywacke turbidites. Graywacke appears to be the dominant rock type in the LowerCretaceous part of the restricted Gemuk Group. Detrital zircon analyses were performed on two sandstone samples using SHRIMP. One sandstone yielded a dominant age cluster of 133-180 Ma; the oldest grain is only 316 Ma. The second sample is dominated by zircons of 130-154 Ma; the oldest grain is 292 Ma. The youngest zircons are probably not much older than the sandstone itself. Point counts of restricted Gemuk Group sandstones yield average ratios of 24/29/47 for Q/F/L, 15/83/2 for Ls/Lv/Lm, and 41/48/11 for Qm/P/K. In the field, sandstones of the restricted Gemuk Group are not easily distinguished from sandstones of the overlying Upper Cretaceous turbidite-dominated Kuskokwim Group. Petrographically, however, the restricted Gemuk Group has modal K-feldspar, whereas the Kuskokwim Group generally does not (average Qm/P/K of 64/36/0). Some K-feldspar-bearing graywacke that was previously mapped as Kuskokwim Group (Cady et al., 1955) is here reassigned to the restricted Gemuk Group. Major- and trace element geochemistry of shales from the restricted Gemuk Group and the Kuskokwim Group show distinct differences. The chemical index of alteration (CIA) is distinctly higher forshales of the Kuskokwim Group than for those of the restricted Gemuk Group, suggesting more intense weathering during deposition of the Kuskokwim Group. The restricted Gemuk Group represents an estimated 90-100 m.y. of deep-water sedimentation, first accompanied by submarine volcanism and later by nearby explosive arc activity. Two hypotheses are presented for the tectonic setting. One model that needs additional testing is that the restricted Gemuk Group consists of imbricated oceanic plate stratigraphy. Based on available information, our preferred model is that it was deposited in a back-arc, intra-arc, or forearc basin that was subsequently deformed. The terrane affinity of the restricted Gemuk Group is uncertain. The rocks of this area were formerly assigned to the Hagemeister subterrane of the Togiak terrane-a Late Triassic to Early Cretaceous arc-but our data show this to be a poor match. None of the other possibilities (e.g., Nukluk and Tikchik subterranes of the Goodnews terrane) is viable; hence, the terrane subdivision and distribution in southwestern Alaska may need

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Marti L. Miller, D. C. Bradley, T. K. Bundtzen, R. B. Blodgett, E.A. Pessagno, R. D. Tucker, A. G. Harris. 2007. The restricted gemuk group: A triassic to lower cretaceous succession in southwestern Alaska. https://doi.org/10.1130/2007.2431(12)

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

The Maryland Coastal Plain Aquifer Information System: A GIS-based tool for assessing groundwater resources

Groundwater is the source of drinking water for ∼1.4 million people in the Coastal Plain Province of Maryland (USA). In addition, groundwater is essential for commercial, industrial, and agricultural uses. Approximately 0.757 × 109 L d –1 (200 million gallons/d) were withdrawn in 2010. As a result of decades of withdrawals from the coastal plain confined aquifers, groundwater levels have declined by as much as 70 m (230 ft) from estimated prepumping levels. Other issues posing challenges to long-term groundwater sustainability include degraded water quality from both man-made and natural sources, reduced stream base flow, land subsidence, and changing recharge patterns (drought) caused by climate change. In Maryland, groundwater supply is managed primarily by the Maryland Department of the Environment, which seeks to balance reasonable use of the resource with long-term sustainability. The chief goal of groundwater management in Maryland is to ensure safe and adequate supplies for all current and future users through the implementation of appropriate usage, planning, and conservation policies. To assist in that effort, the geographic information system (GIS)–based Maryland Coastal Plain Aquifer Information System was developed as a tool to help water managers access and visualize groundwater data for use in the evaluation of groundwater allocation and use permits. The system, contained within an ESRI ArcMap desktop environment, includes both interpreted and basic data for 16 aquifers and 14 confining units. Data map layers include aquifer and ­confining unit layer surfaces, aquifer extents, borehole information, hydraulic properties, time-series groundwater-level data, well records, and geophysical and lithologic logs. The aquifer and confining unit layer surfaces were generated specifically for the GIS system. The system also contains select groundwater-quality data and map layers that quantify groundwater and surface-water withdrawals. The aquifer information system can serve as a pre- and postprocessing environment for groundwater-flow models for use in water-supply planning, development, and management. The system also can be expanded to include features that evaluate constraints to groundwater development, such as insufficient available drawdown, degraded groundwater quality, insufficient aquifer yields, and well-field interference. Ultimately, the aquifer information system is intended to function as an interactive Web-based utility that provides a broad array of information related to groundwater resources in Maryland’s coastal plain to a wide-ranging audience, including well drillers, consultants, academia, and the general public.

Special Paper of the Geological Society of America

The 2011 Mineral, Virginia, earthquake and its significance for seismic hazards in eastern North America: overview and synthesis

The 23 August 2011 M w (moment magnitude) 5.7 ± 0.1, Mineral, Virginia, earthquake was the largest and most damaging in the central and eastern United States since the 1886 M w 6.8–7.0, Charleston, South Carolina, earthquake. Seismic data indicate that the earthquake rupture occurred on a southeast-dipping reverse fault and consisted of three subevents that progressed northeastward and updip. U.S. Geological Survey (USGS) "Did You Feel It?" intensity reports from across the eastern United States and southeastern Canada, rockfalls triggered at distances to 245 km, and regional groundwater-level changes are all consistent with efficient propagation of high-frequency seismic waves (∼1 Hz and higher) in eastern North America due to low attenuation. Reported damage included cracked or shifted foundations and broken walls or chimneys, notably in unreinforced masonry, and indicated intensities up to VIII in the epicentral area based on USGS "Did You Feel It?" reports. The earthquake triggered the first automatic shutdown of a U.S. nuclear power plant, located ∼23 km northeast of the main shock epicenter. Although shaking exceeded the plant's design basis earthquake, the actual damage to safety-related structures, systems, and components was superficial. Damage to relatively tall masonry structures 130 km to the northeast in Washington, D.C., was consistent with source directivity, soft-soil ground-motion amplification, and anisotropic wave propagation with lower attenuation parallel to the northeast-trending Appalachian tectonic fabric. The earthquake and aftershocks occurred in crystalline rocks within Paleozoic thrust sheets of the Chopawamsic terrane. The main shock and majority of aftershocks delineated the newly named Quail fault zone in the subsurface, and shallow aftershocks defined outlying faults. The earthquake induced minor liquefaction sand boils, but notably there was no evidence of a surface fault rupture. Recurrence intervals, and evidence for larger earthquakes in the Quaternary in this area, remain important unknowns. This event, along with similar events during historical time, is a reminder that earthquakes of similar or larger magnitude pose a real hazard in eastern North America.

Virginia

Aftershocks illuminate the 2011 Mineral, Virginia, earthquake causative fault zone and nearby active faults

Deployment of temporary seismic stations after the 2011 Mineral, Virginia (USA), earthquake produced a well-recorded aftershock sequence. The majority of aftershocks are in a tabular cluster that delineates the previously unknown Quail fault zone. Quail fault zone aftershocks range from ~3 to 8 km in depth and are in a 1-km-thick zone striking ~036&deg; and dipping ~50&deg;SE, consistent with a 028&deg;, 50&deg;SE main-shock nodal plane having mostly reverse slip. This cluster extends ~10 km along strike. The Quail fault zone projects to the surface in gneiss of the Ordovician Chopawamsic Formation just southeast of the Ordovician&ndash;Silurian Ellisville Granodiorite pluton tail. The following three clusters of shallow (<3 km) aftershocks illuminate other faults. (1) An elongate cluster of early aftershocks, ~10 km east of the Quail fault zone, extends 8 km from Fredericks Hall, strikes ~035&deg;&ndash;039&deg;, and appears to be roughly vertical. The Fredericks Hall fault may be a strand or splay of the older Lakeside fault zone, which to the south spans a width of several kilometers. (2) A cluster of later aftershocks ~3 km northeast of Cuckoo delineates a fault near the eastern contact of the Ordovician Quantico Formation. (3) An elongate cluster of late aftershocks ~1 km northwest of the Quail fault zone aftershock cluster delineates the northwest fault (described herein), which is temporally distinct, dips more steeply, and has a more northeastward strike. Some aftershock-illuminated faults coincide with preexisting units or structures evident from radiometric anomalies, suggesting tectonic inheritance or reactivation.

Virginia