Geology topics

Groundwater & aquifers

Find USGS groundwater and aquifer publications. Search an aquifer name or place, compare source-supplied dates and open reports for hydrogeology, recharge and water-level studies.

Follow this topic with RSS

At least 613 records · Page 34Linked to original sources

USGS2025

Hydrogeologic investigation, framework, and conceptual flow model of the Antlers aquifer, southeastern Oklahoma, 1980–2022

The 1973 Oklahoma Groundwater Law (Oklahoma Statute §82–1020.5) requires that the Oklahoma Water Resources Board conduct hydrologic investigations of the State’s groundwater basins to support a determination of the maximum annual yield for each groundwater basin. Every 20 years, the Oklahoma Water Resources Board is required to update the hydrologic investigation on which the maximum annual yield determinations were based. The maximum annual yield allocated per acre of land is used to set the equal-proportionate share pumping rate. The maximum annual yield of 5,913,600 acre-feet per year and equal-proportionate-share of 2.1 acre-feet per acre per year currently (2025) in place for the Antlers aquifer were issued by the Oklahoma Water Resources Board on February 14, 1995. Because more than 20 years have elapsed since the 1995 final order for the Antlers aquifer was issued, the U.S. Geological Survey, in cooperation with the Oklahoma Water Resources Board, completed an in-depth hydrologic study that included a hydrogeologic framework and conceptual groundwater-flow model for the 1980–2022 study period. The results of an analysis of land use, long-term climate patterns, streamflow and base-flow patterns, historical groundwater use, as well as groundwater-level fluctuations across the Antlers aquifer are described. In addition, groundwater quality was analyzed for total dissolved solids concentrations and major ions for the Antlers aquifer. An updated hydrogeologic framework was developed that included refining the aquifer boundary in Oklahoma, the creation of new potentiometric surface and saturated thickness of fresh groundwater maps, one multiple-well aquifer test, slug tests, and an analysis of lithologic logs across the aquifer. A conceptual groundwater flow model and water budget were developed by incorporating estimates of recharge from precipitation, saturated-zone evapotranspiration, streambed seepage, lateral groundwater flows, vertical leakage, and withdrawals from groundwater wells.

Oklahoma, Texas↗

USGS2024

Simulation of groundwater flow and brine discharge to the Dolores River in the Paradox Valley, Montrose County, Colorado

Salinity, or total dissolved solids (TDS), of the Colorado River affects agricultural, municipal, and industrial water users and is an important concern in the Western United States. In the Paradox Valley of southwestern Colorado, natural discharge of sodium-chloride brine to the Dolores River from the underlying core of a salt-valley anticline accounts for about 6 percent of the salinity load to the Colorado River. Formation of the Paradox Valley began during the Miocene, and subsequent erosion exposed the Pennsylvania Paradox Formation in the core of the anticline where a cap rock, collapse features, breccia, and sodium-chloride saturated brine developed at the top of the exposed salt diapir. The discharge of brine to the Dolores River is affected by these dissolution features, along with seasonal hydrologic conditions and density-dependent flow between older dense brine and the younger fresh groundwater in the overlying alluvial aquifer. To reduce TDS concentrations in the Dolores River through the Paradox Valley, the Bureau of Reclamation has pumped brine from a series of shallow wells adjacent to the river since July 1996. The pumped brine is collected and piped to a deep disposal well where it is injected into the Mississippian Leadville Limestone at a depth of about 4,570-meters below land surface. The pumping and injection operation is collectively known as the Paradox Valley Unit (PVU), and by 2015, the PVU had substantially reduced TDS concentrations in the Dolores River by about 70 percent. Since 2019, injection-pressure limits and related seismic activity have constrained deep-well injection and thus brine pumping at the PVU. In cooperation with the Bureau of Reclamation, the U.S. Geological Survey developed a MODFLOW-6 three-dimensional, variable-density groundwater flow and TDS transport model of the Paradox Valley to evaluate the effects of PVU pumping operations on brine discharge to the Dolores River and to guide additional research. The finite-difference model grid consists of 76 rows and 48 columns oriented from northwest to southeast in alignment with valley topography and groundwater-flow directions in the near-surface freshwater alluvial aquifer. A 7-layer hydrogeologic framework was developed from existing datasets to represent the alluvial aquifer, cap rock, collapse breccia, and groundwater flow and TDS transport from the underlying Paradox Formation salt to the Dolores River. The model represents a 33-year transient calibration period from 1987 through 2020 that includes pre-PVU conditions from 1987 through June 1996 and post-PVU conditions from July 1996 through 2020. A 1,000-year simulation of groundwater flow and coupled TDS transport computed the initial conditions for the subsequent 33-year transient simulation. Observations of precipitation, streamflow, evaporation, agricultural land use, and PVU brine pumping rates were used to specify appropriate boundary conditions to the model representing time-varying recharge, tributary streamflow, groundwater underflow, evapotranspiration (ET), and PVU pumping. Values for average monthly streamflow and TDS concentration at the upstream streamgage, the Dolores River at Bedrock (USGS streamgage 09169500), were specified as model input where the Dolores River enters Paradox Valley. Observed pumping from the PVU, water levels and TDS concentrations in groundwater, and streamflow and estimated TDS concentrations at the downstream streamgage, the Dolores River near Bedrock (USGS streamgage 09171100), were calibration targets that constrained the manual calibration of model parameters representing aquifer hydraulic conductivity, storage, streambed conductance, recharge, and (ET). Two primary model-calibration targets were the match between observed and simulated TDS mass flux from PVU pumping wells and the match between estimated and simulated TDS mass flux to the Dolores River. The simulated TDS mass withdrawn by pumping wells is calculated by the model as the product of the assigned pumping rate and simulated groundwater TDS concentrations. Because actual pumping rates were assigned as simulated values, the total simulated PVU pumping for the 33-year calibration is within 0.5 percent of the observed values. However, simulated concentrations and thus mass flux of TDS withdrawn by the PVU pumping wells were consistently about 26 percent less than observed values for all the simulated time periods (33-year simulation, pre-PVU, and post-PVU). The representation of brine inflow was explored through additional modeling to evaluate the effect of the simulated brine source on groundwater TDS concentrations. Results indicated that a saturated-salt constant-flux brine source best replicated the magnitude and transient pattern observed for TDS mass flux from PVU pumping wells. The simulated TDS mass flux to the Dolores River is compared to estimates based on observed streamflow and specific conductance (SC) data for the downstream streamgage. The calibrated model provided a close fit of simulated to measured streamflow at the downstream streamgage, and the calibrated model fit to estimated TDS concentrations at the downstream streamgage was reasonable. The greatest differences between simulated and estimated values occurred during drought periods from June 2000 to March 2003, May 2012 to June 2013, and October 2013 to October 2014, when simulated TDS concentrations in the river were greater than estimated concentrations. In general, simulated TDS mass flux to the river for the pre-PVU period is in good agreement with estimated values (2-percent difference), but the model overestimated TDS mass flux to the river by about 41 percent during the post-PVU period. The model uncertainty with respect to TDS mass flux to the river indicates other processes or model parameters not well represented by the model are affecting the system, especially during drought. During model calibration, the most sensitive parameters were identified as vertical hydraulic conductivity of the alluvial aquifer, conductance of the Dolores River streambed, ET extinction depth and rate, and recharge rate. Five 5-year scenarios of conditions for 2021–25 were simulated to assist evaluation of alternative strategies to manage the discharge of brine into the Dolores River. The first scenario simulates no PVU pumping and serves as a base case for comparison to the other scenarios. Two scenarios simulate the effects of varying withdrawal timing at an annual rate about one-third less than during 2010 through 2018. During high-flow spring snowmelt runoff periods when brine discharge is naturally minimized, PVU pumping does not substantially affect salinity in the Dolores River, and comparison of these two scenarios indicates that scheduling brine withdrawals during times of low river stage is nearly as effective at reducing TDS mass flux to the river as pumping brine year-round. Cessation of pumping during periods of high river stage may be advantageous for system maintenance, brine injection, and seismic-risk reduction. The fourth scenario tested the effect of reducing irrigation-return flow on brine discharge and predicted a slight reduction of TDS mass flux to the Dolores River, but not as great a reduction as that of using the PVU to remove brine. The fifth scenario simulated 5 years of drought conditions without PVU pumping and indicates brine discharge during drought about 15 percent greater than during average hydrologic conditions. Results from scenario 5 are consistent with the calibrated model results and indicate that aquifer properties and ET processes and parameters may be affecting simulation results during drought. The Paradox Valley groundwater model provides a reasonable overall match to observed conditions in the Dolores River. The model is useful for evaluating relative differences between brine management scenarios to inform PVU operational decisions and to identify gaps in data and process understanding. Representation of the brine source, hydraulic-conductivity parameters, and recharge and ET processes were identified as potential areas for additional field and modeling research. Additional research in the Paradox Valley might include field-data collection that provides additional information on the hydrogeologic framework, groundwater levels, groundwater TDS concentrations, stream characteristics, and aquifer properties. Additional modeling efforts could benefit from applying advanced tools for model development, calibration, and visualization including parameter-estimation and sensitivity analysis. Statistical evaluation of known model uncertainties such as hydraulic conductivity, streambed conductance, representations of the brine source, recharge, and ET could improve the match between simulated and estimated TDS mass flux from PVU pumping wells and to the Dolores River further informing model predictions and system understanding for the Paradox Valley.

Colorado↗

USGS2015

Groundwater flow in the Brunswick/Glynn County area, Georgia, 2000-04

An existing regional steady-state model for coastal Georgia, and parts of South Carolina and Florida, was revised to evaluate the local effects of pumping on the migration of high chloride (saline) water in the Upper Floridan aquifer located in the Brunswick/Glynn County, Georgia (Ga.) area. Revisions were focused on enhancing the horizontal and vertical resolution of the regional model grid in the vicinity of saline water. Modifications to the regional model consisted of (1) limiting grid size to a maximum of 500 feet (ft) per side in the vicinity of chloride contamination; (2) representing the upper and lower Brunswick aquifers with distinct model layers; (3) similarly, representing upper and lower water-bearing zones of the Upper Floridan aquifer with distinct model layers in Glynn and Camden Counties, Ga.; and (4) establishing new hydraulic-property zones in the Upper Floridan aquifer. The revised model simulated steady-state conditions that were assumed to exist during 2000 and 2004. Calibration of the revised steady-state model using pumping rates from 2000 indicates a "good" match (±10 ft) based on 181 observations, with median residuals (simulated minus observed water levels) in each of the active model layers ranging from -8.62 to 4.67 ft, and root mean square error (RMSE) ranging from 10.9 to 11.4 ft. In the Brunswick/Glynn County area, groundwater-level residuals in the upper water-bearing zone of the Upper Floridan aquifer (layer 7) indicate an "excellent" match (±5 ft) based on 41 observations with a median residual of -0.35 ft and RMSE of 4.32 ft. Calibration of the revised steady-state model using 2004 pumping rates and adjusted specified-head input values in the Floridan aquifer system indicates a "good" match (-10 ft) based on 88 observations, with median residuals in each of the active model layers ranging from -6.31 to -2.05 ft, and RMSE ranging from -6.95 to 14.5 ft. In the Brunswick/Glynn County area, groundwater-level residuals in the upper water-bearing zone of the Upper Floridan aquifer (layer 7) indicate an "excellent" match (±5 ft) based on 32 observations with a median residual of -1.50 ft and RMSE of 5.34 ft. Simulated potentiometric surfaces for 2000 and 2004 indicate coastward groundwater flow in the Upper and Lower Floridan aquifers influenced by pumping centers at Savannah, Jesup, and Brunswick, Ga., and indicate steep potentiometric gradients to the west and north of the Gulf Trough. In the Brunswick/Glynn County area, simulated industrial production wells located north of downtown Brunswick intercept local groundwater flow in the upper and lower water-bearing zones of the Upper Floridan aquifer and have created a cone of depression that locally alters the regional coastward flow direction. Maps of simulated water-level change during the 2000-04 period show differences in groundwater levels in the Upper Floridan aquifer that range from -2.5 ft to more than 5 ft in areas of coastal Georgia, and more than 20 ft near the Georgia-Florida State Line. Positive values indicate higher simulated water levels during 2004 than during 2000, which were caused by reduced pumping in the Upper Floridan aquifer prompted by the shutdown of a paper mill near the southern model boundary in 2002 and increased recharge following a prolonged drought during 1998-2002. Simulated potentiometric profiles for 2000 and 2004 were used to evaluate the potentiometric gradients in the upper water-bearing zone of the Upper Floridan aquifer (layer 7) near the chloride plume in the downtown Brunswick area. Four potentiometric profiles were constructed for 2000 to compare the simulated and observed water levels in 13 wells and were oriented outward from a primary well field. The simulated potentiometric gradients from the four profiles for 2000 ranged from 3.6 to 5.2 feet per mile (ft/mi) compared to observed values ranging from 4.1 to 5.6 ft/mi. The five potentiometric profiles constructed for 2004 allowed for a similar comparison using simulated and observed water levels in 18 wells. The simulated potentiometric gradients from the five profiles for 2000 ranged from 3.6 to 11.1 ft/mi compared to observed values ranging from 3.8 to 10.2 ft/mi. Simulated potentiometric gradients were higher for 2004 than for 2000 because of the inclusion of a well located within the cone of depression near downtown Brunswick. Composite-scaled sensitivities of the model parameters indicate the revised model is most sensitive to pumping rates, followed by the horizontal hydraulic conductivity in the Upper Floridan aquifer for zones along coastal Georgia. The revised model is least sensitive to the horizontal hydraulic conductivity of the confining units and vertical hydraulic conductivity of the aquifers. For parameters defined by hydraulic-property zones in the upper and lower water-bearing zones of the Upper Floridan aquifer, such as horizontal hydraulic conductivity, model sensitivity was not as great in the Brunswick/Glynn County area as other areas along coastal Georgia. The model exhibited more sensitivity to these parameters however, than to parameters representing the majority of zones defining the vertical hydraulic conductivity of the confining units, which originally were assumed to govern upward migration of chloride contamination into this aquifer. Analysis of simulated water-budget components for 2000 and 2004 indicate that specified-head boundaries in the Floridan aquifer system to the south and southwest of the regional model area control about 70 percent of inflows and nearly 50 percent of outflows to the model region. Other water-budget components indicate an 80-million-gallon-per-day decrease in pumping from the Floridan aquifer system during this period.

Georgia↗

USGS2011

Assessing the vulnerability of public-supply wells to contamination—Edwards aquifer near San Antonio, Texas

This fact sheet highlights findings from the vulnerability study of a public-supply well field in San Antonio, Texas. The well field consists of six production wells that tap the Edwards aquifer. Typically, one or two wells are pumped at a time, yielding an average total of 20-21 million gallons per day. Water samples were collected from public-supply wells in the well field and from monitoring wells installed along general directions of flow to the well field. Samples from the well field contained some constituents of concern for drinking-water quality, including nitrate; the pesticide compounds atrazine, deethylatrazine, and simazine; and the volatile organic compounds tetrachloroethene (also called perchloroethene, or PCE), chloroform, bromoform, and dibromochloromethane. These constituents were detected in untreated water at concentrations much less than established drinking-water standards, where such standards exist. Overall, the study findings point to four primary factors that affect the movement and fate of contaminants and the vulnerability of the public-supply well field in San Antonio, Texas: (1) groundwater age (how long ago water entered, or recharged, the aquifer), (2) fast pathways for flow of groundwater through features formed or enlarged by dissolution of bedrock, (3) recharge characteristics of the aquifer, and (4) natural geochemical processes within the aquifer. A computer-model simulation of groundwater flow and transport was used to estimate the traveltime (or age) of water particles entering public-supply well W4 in the well field. Modeled findings show that almost half of the water reaching the public-supply well is less than 2 years old. Such a large percentage of very young water indicates that (1) contaminants entering the aquifer may be transported rapidly to the well, (2) there is limited time for chemical reactions to occur in the aquifer that may attenuate contaminants, and (3) should recharge water become contaminated with pathogenic microorganisms (which have limited survival times in aquifers), the microorganisms may be able to persist to the well. Features formed or enlarged by dissolution of bedrock allow most of the water reaching the well field to travel rapidly from the recharge zone to the supply wells along fast pathways rather than through the aquifer matrix. Supporting evidence includes (1) geophysical logging and flowmeter measurements in public-supply well W4 and in nearby monitoring wells showing that most of the flow volume into and out of the wells occurs in three horizontal zones, thought to be dissolution-enlarged bedding planes; and (2) fluctuations in groundwater chemistry that can be correlated to individual precipitation events. Analysis of water samples collected from shallow, intermediate, and deep zones of the Edwards aquifer at public-supply well W4 and from nearby monitoring wells reveal that water in the vicinity of the selected well field is notably well mixed throughout the sampled thickness of the Edwards aquifer, showing little of the chemical variation with depth that is commonly seen in other aquifers. Contaminants were found at all depths, and they did not enter the well through a specific horizon. The well-mixed nature of the Edwards aquifer is caused by the recharge characteristics of the area combined with fast flow paths through karst features. Constituents of concern in the Edwards aquifer for the long-term sustainability of the groundwater resource include the nutrient nitrate and anthropogenic contaminants such as atrazine, PCE, and chloroform. A scenario of hypothetical contaminant loading in the aquifer recharge zone was evaluated by using results from groundwater-flow-model particle tracking to assess the response of the aquifer to potential contamination. Results indicate that the concentrations at public-supply well W4 would begin to respond to contaminant loading in the recharge zone within 1 year because of short traveltimes through fast flow paths. Within 10 years, contaminant concentrations in the public-supply well would be equal to 90 percent of the input concentration for a contaminant (such as nitrate) that does not degrade in the oxic conditions of the Edwards aquifer.

Texas↗

USGS2009

Hydrogeologic Framework, Groundwater Movement, and Water Budget in Tributary Subbasins and Vicinity, Lower Skagit River Basin, Skagit and Snohomish Counties, Washington

A study to characterize the groundwater-flow system in four tributary subbasins and vicinity of the lower Skagit River basin was conducted by the U.S. Geological Survey to assist Skagit County and the Washington State Department of Ecology in evaluating the effects of potential groundwater withdrawals and consumptive use on tributary streamflows. This report presents information used to characterize the groundwater and surface-water flow system in the subbasins, and includes descriptions of the geology and hydrogeologic framework of the subbasins; groundwater recharge and discharge; groundwater levels and flow directions; seasonal groundwater-level fluctuations; interactions between aquifers and the surface-water system; and a water budget for the subbasins. The study area covers about 247 mi2 along the Skagit River and its tributary subbasins (East Fork Nookachamps Creek, Nookachamps Creek, Carpenter Creek, and Fisher Creek) in southwestern Skagit County and northwestern Snohomish County, Washington. The geology of the area records a complex history of accretion along the continental margin, mountain building, deposition of terrestrial and marine sediments, igneous intrusion, and the repeated advance and retreat of continental glaciers. A simplified surficial geologic map was developed from previous mapping in the area, and geologic units were grouped into nine hydrogeologic units consisting of aquifers and confining units. A surficial hydrogeologic unit map was constructed and, with lithologic information from 296 drillers'logs, was used to produce unit extent and thickness maps and four hydrogeologic sections. Groundwater in unconsolidated aquifers generally flows towards the northwest and west in the direction of the Skagit River and Puget Sound. This generalized flow pattern is likely complicated by the presence of low-permeability confining units that separate discontinuous bodies of aquifer material and act as local groundwater-flow barriers. Groundwater-flow directions in the sedimentary aquifer likely reflect local topographic relief (radial flow from bedrock highs) and more regional westward flow from the mountains to the Puget Sound. The largest groundwater-level fluctuations observed during the monitoring period (October 2006 through September 2008) occurred in wells completed in the sedimentary aquifer, and ranged from about 3 to 27 feet. Water levels in wells completed in unconsolidated hydrogeologic units exhibited seasonal variations ranging from less than 1 to about 10 feet. Synoptic streamflow measurements made in August 2007 and June 2008 indicate a total groundwater discharge to creeks in the tributary subbasin area of about 13.15 and 129.6 cubic feet per second (9,520 and 93,830 acre-feet per year), respectively. Streamflow measurements illustrate a general pattern in which the upper reaches of creeks in the study area tended to gain flow from the groundwater system, and lower creek reaches tended to lose water. Large inflows from tributaries to major creeks in the study area suggest the presence of groundwater discharge from upland areas underlain by bedrock. The groundwater system within the subbasins received an average (September 1, 2006 to August 31, 2008) of about 92,400 acre-feet or about 18 inches of recharge from precipitation a year. Most of this recharge (65 percent) discharges to creeks, and only about 3 percent is withdrawn from wells. The remaining groundwater recharge (32 percent) leaves the subbasin groundwater system as discharge to the Skagit River and Puget Sound.

Scientific Investigations Report↗

USGS2006

Longitudinal hydraulic analysis of river‐aquifer exchanges

A longitudinal analysis of transient flow between a river and an underlying aquifer is developed to calculate flow rates between the river and the aquifer and the location of groundwater seepage into the river as it changes over time. Two flow domains are defined in the analysis: an upstream domain of fluvial recharge, where water flows vertically from the river into the unsaturated portion of the aquifer and horizontally in saturated parts of the aquifer, and a downstream domain of groundwater seepage to the river, where groundwater flows parallel to the underlying impermeable base. The river does not necessarily penetrate completely through the aquifer. A one‐dimensional, unsteady flow equation is derived from mass conservation, Darcy's law, and the geometry of the river‐aquifer system to calculate the water table position and the groundwater seepage rate into the river. Models based on numerical and analytical solutions of the flow equation were applied to a reach of the Methow River in north central Washington. The calibrated models simulated groundwater seepage with a root‐mean‐square error less than 5% of the mean groundwater seepage rates for three low‐flow evaluation periods. The analytical model provides a theoretical basis for a nonlinear exponential base flow recession generated by a draining aquifer, but not an explicit functional form for the recession. Unlike cross‐sectional approaches, the longitudinal approach allows the analysis of the length and location of groundwater seepage to a river, which have important ecological implications in many rivers. In the numerical simulations, the length of the groundwater seepage varied seasonally by about 4 km and the upstream boundary of groundwater seepage was within 689 m of its location at a stream gage on 9 September 2001 and within 91 m of its location on 6 October 2002. To demonstrate its utility in ecological applications, the numerical model was used to calculate differences in length of groundwater seepage to the Methow River under an early runoff scenario and the timing of those differences with respect to life stages of chinook salmon.

Water Resources Research↗

USGS2011

Groundwater quality in the San Diego Drainages Hydrogeologic Province, California

More than 40 percent of California's drinking water is from groundwater. To protect this vital resource, the State of California created the Groundwater Ambient Monitoring and Assessment (GAMA) Program. The Priority Basin Project of the GAMA Program provides a comprehensive assessment of the State's groundwater quality and increases public access to groundwater-quality information. The San Diego Drainages Hydrogeologic Province (hereinafter referred to as San Diego) is one of the study units being evaluated. The San Diego study unit is approximately 3,900 square miles and consists of the Temecula Valley, Warner Valley, and 12 other alluvial basins (California Department of Water Resources, 2003). The study unit also consists of all areas outside defined groundwater basins that are within 3 kilometers of a public-supply well. The study unit was separated, based primarily on hydrogeologic settings, into four study areas: Temecula Valley, Warner Valley, Alluvial Basins, and Hard Rock (Wright and others, 2005). The sampling density for the Hard Rock study area, which consists of areas outside of groundwater basins, was much lower than for the other study areas. Consequently, aquifer proportions for the Hard Rock study area are not used to calculate the aquifer proportions shown by the pie charts. An assessment of groundwater quality for the Hard Rock study area can be found in Wright and Belitz, 2011. The temperatures in the coastal part of the study unit are mild with dry summers, moist winters, and an average annual rainfall of about 10 inches. The temperatures in the mountainous eastern part of the study unit are cooler than in the coastal part, with an annual precipitation of about 45 inches that occurs mostly in the winter. The primary aquifers consist of Quaternary-age alluvium and weathered bedrock in the Temecula Valley, Warner Valley, and Alluvial Basins study areas, whereas in the Hard Rock study area the primary aquifers consist mainly of fractured and decomposed granite of Mesozoic age. The primary aquifers are defined as those parts of the aquifers corresponding to the perforated intervals of wells listed in the California Department of Public Health (CDPH) database. Public-supply wells typically are drilled to depths between 200 and 700 feet, consist of solid casing from the land surface to a depth of about 60 to 170 feet, and are perforated, or consist of an open hole, below the solid casing. Water quality in the shallow and deep parts of the aquifer system may differ from water quality in the primary aquifers. Municipal water use accounts for approximately 70 percent of water used in the study unit; the majority of the remainder is used for agriculture, industry, and commerce. Groundwater accounts for approximately 8 percent of the municipal supply, and surface water, the majority of which is imported, accounts for the rest. Recharge to groundwater occurs through stream-channel infiltration from rivers and their tributaries, infiltration in engineered recharge basins, and infiltration of water from precipitation and irrigation. The primary source of discharge is water pumped from wells.

California↗

USGS2011

Groundwater quality in the San Diego Drainages Hydrogeologic Province, California

California↗

USGS2014

Simulation of groundwater flow and saltwater movement in the Onslow County area, North Carolina: predevelopment-2010

Onslow County, North Carolina, is located within the designated Central Coastal Plain Capacity Use Area (CCPCUA). The CCPCUA was designated by law as a result of groundwater level declines of as much as 200 feet during the past four decades within aquifers in rocks of Cretaceous age in the central Coastal Plain of North Carolina and a depletion of water in storage from increased groundwater withdrawals in the area. The declines and depletion of water in storage within the Cretaceous aquifers increase the potential for saltwater migration—both lateral encroachment and upward leakage of brackish water. Within the CCPCUA, a reduction in groundwater withdrawals over a period of 16 years from 2003 to 2018 is mandated. Under the CCPCUA rules, withdrawals in excess of 100,000 gallons per day from any of the Cretaceous aquifer well systems are subject to water-use reductions of as much as 75 percent. To assess the effects of the CCPCUA rules and to assist with groundwater-management decisions, a numerical model was developed to simulate the groundwater flow and chloride concentrations in the surficial Castle Hayne, Beaufort, Peedee, and Black Creek aquifers in the Onslow County area. The model was used to (1) simulate groundwater flow from 1900 to 2010; (2) assess chloride movement throughout the aquifer system; and (3) create hypothetical scenarios of future groundwater development. After calibration of a groundwater flow model and conversion to a variable-density model, five scenarios were created to simulate future groundwater conditions in the Onslow County area: (1) full implementation of the CCPCUA rules with three phases of withdrawal reductions simulated through 2028; (2) implementation of only phase 1 withdrawal reductions of the CCPCUA rules and simulated through 2028; (3) implementation of only phases 1 and 2 withdrawal reductions of the CCPCUA rules and simulated through 2028; (4) full implementation of the CCPCUA rules with the addition of withdrawals from the Castle Hayne aquifer in Onslow County at the fully permitted amount in the final stress period and simulated through 2028; and (5) full implementation of the CCPCUA rules as in scenario 1 except simulated through 2100. Results from the scenarios give an indication of the water-level recovery in the Black Creek aquifer throughout each phase of the CCPCUA rules in Onslow County. Furthermore, as development of the Castle Hayne aquifers was increased in the scenarios, cones of depression were created around pumping centers. Additionally, the scenarios indicated little to no change in chloride concentrations for the time periods simulated.

North Carolina↗

USGS2020

Hydrogeologic characterization, groundwater chemistry, and vulnerability assessment, Ute Mountain Ute Reservation, Colorado and Utah

The U.S. Geological Survey, in cooperation with the Ute Mountain Ute Tribe (UMUT), initiated a study in 2016 to increase understanding of the hydrogeology and chemistry of groundwater within select areas of the Ute Mountain Ute Reservation (UMUR) in Colorado and Utah, identify vulnerabilities to the system and other natural resources, and outline information needs to aid in the understanding and protection of groundwater resources. The results presented for this study can be used to support the UMUT’s goal of protecting their vital groundwater resources on the UMUR. Hydrogeologic conditions were characterized for the surficial aquifer contained in Quaternary-age unconsolidated surficial deposits and the Dakota aquifer contained in the Cretaceous-age Dakota Sandstone. In the surficial aquifer, median depth to water ranges from about 5.4 to 17.2 feet below land surface in the Farm and Ranch Enterprise area and 11 to 34 feet below land surface in the Towaoc area, and the water table slopes generally southwest or south. A map of depth to the top of the Dakota Sandstone was constructed from existing well data. Depths range from zero in outcrop areas to more than 3,000 feet below land surface on mesas in the southeastern part of the UMUR. Groundwater-chemistry data were collected by the UMUT from 13 springs and 31 wells from 1996 through 2017. Specific conductance was much lower for samples from springs than from wells; median values were 512 and 6,024 microsiemens per centimeter at 25 degrees Celsius, respectively. Spring samples were well oxygenated. A few well samples were anoxic (dissolved oxygen concentrations less than 0.5 milligrams per liter [mg/L]), indicating reducing conditions in the aquifer. About 75 percent of spring samples had fresh water (total dissolved solids concentrations less than 1,000 mg/L), and about 85 percent of well samples had brackish or highly saline water (total dissolved solids concentrations greater than 1,000 mg/L). Water type for springs on the Ute Mountains was calcium bicarbonate. Lower-altitude springs had a calcium-sulfate water type. Most well samples had sodium as the dominant cation, and sulfate, bicarbonate, and chloride as the dominant anions. Fluoride concentrations in about 45 percent of well samples were greater than an agricultural-use standard of 2 mg/L. Nitrate plus nitrite concentrations in most spring and well samples were less than about 1.6 mg/L per liter. Concentrations in samples from wells in the irrigated agricultural area were elevated; the maximum concentration was 78.5 mg/L. About one-half of the trace-element samples had concentrations that were less than laboratory reporting limits. Only aluminum, arsenic, and selenium in spring samples, and boron and selenium in well samples, were detected at concentrations greater than surface-water standards or water-quality standards for agricultural use of groundwater. Only three organic compounds, the pesticides alachlor and atrazine and the volatile organic compound di(2-ethylhexyl) phthalate, were detected in well samples. The Escherichia coli bacteria was detected in 47 and 23 percent of samples from wells and springs, respectively. The E. coli detections included samples from three culturally significant springs, which did not meet the UMUT cultural-use standard of total absence of E. coli. Tritium and carbon-14 were the primary environmental tracers used for interpreting groundwater ages for Lopez 2 Spring and five wells (AP–1, 5000 Block, Cottonwood Spring, Goodknight, and SE Toe). Water from the AP–1 well contained a mixture of pre- and post-1950s recharge. Tritium and carbon-14 recharge ages for Lopez 2 Spring (post-1950s in age), Goodknight and SE Toe wells (pre-1950s in age), and Cottonwood Spring well (primarily pre-1950s in age) are supported by helium-4 data. The helium-4 data for the 5000 Block well are inconsistent with the tritium and carbon-14 age of pre-1950s recharge because of interference caused by high methane concentrations in the water. Springs and surficial deposits are more vulnerable to contamination from anthropogenic chemicals than deeper bedrock wells. Bedrock aquifers are vulnerable in areas where the geologic formations containing the aquifers are exposed at the land surface. Groundwater in deep bedrock aquifers is likely thousands of years old and is not currently affected by present-day land uses. Both shallow and deep groundwater are vulnerable to naturally occurring salts and minerals, such as of total dissolved solids, major ions, nitrate, and trace elements. Effects of a changing climate on water resources and other ecological characteristics of the UMUR could include changes in evapotranspiration, a decrease in snowpack, decreased aquifer recharge and flow of springs, a decrease in soil moisture, and increased occurrence of wildfires and forest mortality. Of particular interest for the UMUT are possible effects of a changing climate on medicinal and culturally important plants and springs Several information needs were identified during this study that would aid in the understanding and protection of groundwater resources on the UMUR. These include well-completion information for bedrock wells, the collection of environmental tracer data at additional wells, the addition of methane and hydrocarbon analysis to well sampling plans, and the resampling of springs and wells that were last sampled in 2002 or earlier.

Colorado↗

USGS2010

Pesticides in groundwater in the Anacostia River and Rock Creek watersheds in Washington, D.C., 2005 and 2008

The U.S. Geological Survey (USGS), in cooperation with the District Department of the Environment, conducted a groundwater-quality investigation to (a) determine the presence, concentrations, and distribution of selected pesticides in groundwater, and (b) assess the presence of pesticides in groundwater in relation to selected landscape, hydrogeologic, and groundwater-quality characteristics in the shallow groundwater underlying the Anacostia River and Rock Creek watersheds in Washington, D.C. With one exception, well depths were 100 feet or less below land surface. The USGS obtained or compiled ancillary data and information on land use (2001), subsurface sediments, and groundwater samples from 17 wells in the lower Anacostia River watershed from September through December 2005, and from 14 wells in the lower Anacostia River and lower Rock Creek watersheds from August through September 2008. Twenty-seven pesticide compounds, reflecting at least 19 different types of pesticides, were detected in the groundwater samples obtained in 2005 and 2008. No fungicides were detected. In relation to the pesticides detected, degradate compounds were as or more likely to be detected than applied (parent) compounds. The detected pesticides chiefly reflected herbicides commonly used in urban settings for non-specific weed control or insecticides used for nonspecific haustellate insects (insects with specialized mouthparts for sucking liquid) or termite-specific control. Detected pesticides included a combination of pesticides currently (2008) in use, banned or under highly restricted use, and some that had replaced the banned or restricted-use pesticides. The presence of banned and restricted-use pesticides illustrates their continued persistence and resistance to complete degradation in the environment. The presence of the replacement pesticides indicates the susceptibility of the surficial aquifer to contamination irrespective of the changes in the pesticides used. A preliminary review of the data collected in 2005 and 2008 indicated that differences in the surficial geology, land use (as a surrogate for pesticide use), and above-average precipitation for most of 2004 through 2008, as well as differences in the number and performance of USGS laboratory methods used, could have led to more pesticides detected in groundwater samples collected in 2008 than in groundwater samples collected in 2005. Thus, although data from both years of collection were used for interpretive analysis, emphasis was placed on the analysis of the data obtained in 2008. The presence of pesticides in shallow groundwater (less than approximately 100 ft (feet), or 30 m (meters), below land surface) indicated at least the upper surficial aquifer in Washington, D.C. was susceptible to contamination. One or more herbicides or insecticides were detected in groundwater samples collected from 50 percent of the shallow wells sampled in 2005, and from 62 percent of the shallow wells sampled in 2008. Differences among types of pesticides in shallow groundwater were apparent. The most frequently detected class of herbicides was the s-triazine compounds—atrazine, simazine, or prometon, or the atrazine-degradate compounds—2-chloro-4-ethylamino-6-amino-s-triazine (desethylatrazine or CIAT) and 2-chloro-4-isopropylamino-6-amino-s-triazine (hydroxyatrazine or OIET). The next most frequently detected classes of herbicides were the chloroacetanilides, including metolachlor and acetochlor, and the ureic herbicides, including diuron (and degradate, 3,4-dichloroaniline), fluometuron, metsulfuron methyl, sulfameturon, bromacil, and tebuthiuron. Insecticides also were detected, but less frequently than herbicides, with one or more insecticides present in groundwater samples from 38 percent of shallow wells sampled in 2008. Detected insecticides included parent or degradate compounds commonly used for either nonspecific or haustellate (sucking) insects, including chlorpyrifos and dichlorodiphenyldichloroethane (p,p’-DDD; a degradate of dichlorodiphenyltrichloroethane, DDT), and for termite control, including dieldrin, chlordane, heptachlor epoxide, (a degradate of heptachlor), fipronil, and the sulfone and sulfide degradates of fipronil. The concentrations of individual pesticides in shallow groundwater in both years were low. Maximum concentrations were no greater than a few tenths of a microgram per liter (μg/L); typical concentrations often were less than 0.1 μg/L. Multiple pesticides, however, commonly were present in groundwater. For example, in 2008, approximately 88 percent (7 of 8) of the wells that yielded a sample with at least one detectable pesticide contained five or more pesticides. The highest number of detections occurred in a groundwater sample from well WE Ca 32, which is located in a highly developed urban area; this sample contained 15 different pesticide residues. In relation to human and aquatic health, no pesticide concentration in either 2005 or 2008 exceeded Federal drinking-water standards. Groundwater samples from a few sites, however, contained levels of chiefly banned or restricted-use pesticides that exceeded other human-health and (or) aquatic-health guidelines. For example, concentrations of dieldrin in 2008 groundwater samples from three wells—WE Ca 32 (0.028 μg/L), WE Ba 11 (0.016 μg/L), and WW Ac 8 (0.014 μg/L)—fell within the range of concern for 2004 Federally approved non-regulatory USGS Health-Based Assessment benchmarks (0.002 to 0.2 μg/L), and exceeded earlier (1999) Federal criteria for drinking water (0.000052 μg/L). Other individual compounds whose concentrations exceeded 1999 Federal guidelines for samples from one or more of these three sites, or another site, included p,p’-DDD, dichlorodiphenyldichloroethylene (p,p’-DDE; another degradate of DDT), chlordane, and heptachlor epoxide. Pesticide concentrations in groundwater also were compared to three aquatic-health guidelines for freshwater (United States, Great Lakes, or Canada). One or more of these guidelines were exceeded in groundwater samples obtained in 2005 or 2008 for one or more of the compounds chlordane, dieldrin, heptachlor epoxide, p,p’-DDE, p,p’-DDD, and chlorpyrifos. The spatial distribution of pesticides in the shallow groundwater appeared to be related, in part, to land use, a surrogate for pesticide use. Although most of the wells sampled in this study are in parklands or other relatively open and accessible space, multiple pesticides most often were detected in 2008 groundwater samples collected from wells where a considerable percentage (in excess of 60 percent) of the land within a 500-m radius is developed space (residential, commercial, or other urban infrastructure). Insecticides were detected in wells surrounded by at least 50 percent, and most commonly by more than 80 percent, development. Well WE Ca 32, the site associated with the highest number of pesticide residues in groundwater (8 herbicides and 7 insecticides), is in a small residential park, where 99 percent of the surrounding land is well-maintained residential and commercial development. The vertical distribution of detected pesticides in shallow groundwater appeared to be related, in part, to depth below land surface, surficial-bedrock type, and differences in the chemistry of shallow groundwater. Pesticides were detected at relatively shallow depths in wells that may not have fully penetrated the shallow aquifer. For wells in which at least one pesticide was detected, the median depth below land surface to the top of the well screen was 5.8 m, and the maximum depth was 8.5 m. Among the types of surficial materials in which wells were completed—alluvium, terrace deposits, or Potomac Formation sub- or outcrops in the Coastal Plain Province, and saprolite or fractured bedrock (Laurel and Sykesville Formations) underlying saprolite in the Piedmont Province—no pesticides were detected in groundwater associated with wells completed in the alluvium or fractured bedrock. Detections occurred in some but not all wells completed in the other surficial materials. Overall, the pattern in occurrence appeared related to the local permeability of these sediments and groundwater chemistry. Groundwater with multiple pesticide detections tended to occur in permeable sediments (absent any appreciable overlying clay, silt, or clay-silt layers), in conjunction with other common urban contaminants (elevated chloride in excess of tens to hundreds of milligrams per liter (mg/L), and oxic, rather than reduced, groundwater as evidenced by elevated (in excess of 5 mg/L) concentrations of nitrate). The results of this investigation were compared to results from two other similar and recent studies on pesticide occurrence in the shallow aquifer. These included a study in the nearby Maryland and Delaware Coastal Plain Physiographic Province and one in the Maryland and Virginia Piedmont Physiographic Province. Results from these studies were similar to the current study in relation to (a) the types, frequencies, concentrations, and mixtures of pesticides detected; (b) compounds that exceeded human-and aquatic-health criteria; and (c) the occurrence and distribution of pesticides within the surficial aquifer in relation to depths, sediment types, and groundwater chemistries.

Washington D.C.↗

USGS2023

Analysis of aquifer framework and properties, North Magee Street well field, Southampton, New York

The U.S. Geological Survey, in cooperation with the Suffolk County Water Authority, evaluated the groundwater-flow characteristics and aquifer properties of the North Magee Street well field north of the village of Southampton, New York. Characteristics and properties included groundwater-flow direction, potential groundwater-contributing areas to the well field production wells, and aquifer transmissivity and storage. The groundwater flow and aquifer properties were also evaluated to allow Suffolk County Water Authority to better assess the potential source of dissolved halocarbons (refrigerants, such as chlorofluorocarbons). The well field production wells are screened in the upper glacial aquifer and an observation well is screened in the Magothy aquifer. Based on depth and available logs, groundwater from wells screened in the upper glacial aquifer was classified as under water-table (unconfined) conditions, and groundwater from wells screened in the Magothy aquifer was classified as being under semiconfined conditions. Groundwater flows radially to the well field during production and in a northwesterly direction under the effect of the regional flow regime. A previously published particle tracking analysis identified the following recharge contributing areas nearby the well field: (1) contributing areas to surface-water bodies of the Peconic Estuary, (2) contributing areas to surface-water bodies of the South Shore Estuary Reserve, (3) a contributing area to the Atlantic Ocean, and (4) a contributing area to another Suffolk County Water Authority well field. Five other pumping well contributing areas were identified within the study area, including those of various wells pumped for golf-course irrigation. Analysis of drawdown and recovery data collected during the multiple-well aquifer test, through the application of a Neuman analytical model, provided estimates of upper glacial aquifer characteristics and properties. Inclusion of lateral aquifer boundaries was not necessary for the analysis to result in satisfactory matches with the observed water-level responses. Aquifer transmissivity was estimated to be 170,000 feet squared per day. Storativity was estimated to be 0.02 (dimensionless), and specific yield was estimated to be 0.08 (dimensionless), consistent with the inferred degree of confinement and well field characteristics.

New York↗

USGS2011

Trace elements and radon in groundwater across the United States, 1992-2003

Trace-element concentrations in groundwater were evaluated for samples collected between 1992 and 2003 from aquifers across the United States as part of the U.S. Geological Survey National Water-Quality Assessment Program. This study describes the first comprehensive analysis of those data by assessing occurrence (concentrations above analytical reporting levels) and by comparing concentrations to human-health benchmarks (HHBs). Data from 5,183 monitoring and drinking-water wells representing more than 40 principal and other aquifers in humid and dry regions and in various land-use settings were used in the analysis. Trace elements measured include aluminum (Al), antimony (Sb), arsenic (As), barium (Ba), beryllium (Be), boron (B), cadmium (Cd), chromium (Cr), cobalt (Co), copper (Cu), iron (Fe), lead (Pb), lithium (Li), manganese (Mn), molybdenum (Mo), nickel (Ni), selenium (Se), silver (Ag), strontium (Sr), thallium (Tl), uranium (U), vanadium (V), and zinc (Zn). Radon (Rn) gas also was measured and is included in the data analysis. Climate influenced the occurrence and distribution of trace elements in groundwater whereby more trace elements occurred and were found at greater concentrations in wells in drier regions of the United States than in humid regions. In particular, the concentrations of As, Ba, B, Cr, Cu, Mo, Ni, Se, Sr, U, V, and Zn were greater in the drier regions, where processes such as chemical evolution, ion complexation, evaporative concentration, and redox (oxidation-reduction) controls act to varying degrees to mobilize these elements. Al, Co, Fe, Pb, and Mn concentrations in groundwater were greater in humid regions of the United States than in dry regions, partly in response to lower groundwater pH and (or) more frequent anoxic conditions. In groundwater from humid regions, concentrations of Cu, Pb, Rn, and Zn were significantly greater in drinking-water wells than in monitoring wells. Samples from drinking-water wells in dry regions had greater concentrations of As, Ba, Pb, Li, Sr, V, and Zn, than samples from monitoring wells. In humid regions, however, concentrations of most trace elements were greater in monitoring wells than in drinking-water wells; the exceptions were Cu, Pb, Zn, and Rn. Cu, Pb, and Zn are common trace elements in pumps and pipes used in the construction of drinking-water wells, and contamination from these sources may have contributed to their concentrations. Al, Sb, Ba, B, Cr, Co, Fe, Mn, Mo, Ni, Se, Sr, and U concentrations were all greater in monitoring wells than in drinking-water wells in humid regions. Groundwater from wells in agricultural settings had greater concentrations of As, Mo, and U than groundwater from wells in urban settings, possibly owing to greater pH in the agricultural wells. Significantly greater concentrations of B, Cr, Se, Ag, Sr, and V also were found in agricultural wells in dry regions. Groundwater from dry-region urban wells had greater concentrations of Co, Fe, Pb, Li, Mn, and specific conductance than groundwater from agricultural wells. The geologic composition of aquifers and aquifer geochemistry are among the major factors affecting trace-element occurrence. Trace-element concentrations in groundwater were characterized in aquifers from eight major groups based on geologic material, including (1) unconsolidated sand and gravel; (2) glacial unconsolidated sand and gravel; (3) semiconsolidated sand; (4) sandstone; (5) sandstone and carbonate rock; (6) carbonate rock; (7) basaltic and other volcanic rock; and (8) crystalline rock. The majority of groundwater samples and the largest percentages of exceedences of HHBs were in the glacial and nonglacial unconsolidated sand and gravel aquifers; in these aquifers, As, Mn, and U are the most common trace elements exceeding HHBs. Overall, 19 percent of wells (962 of 5,097) exceeded an HHB for at least one trace element. The trace elements with HHBs included in this summary were Sb, As, Ba, Be, B, Cd, Cr,

Scientific Investigations Report↗

USGS2012

Hydrogeologic framework of the Wood River Valley aquifer system, south-central Idaho

The Wood River Valley contains most of the population of Blaine County and the cities of Sun Valley, Ketchum, Hailey, and Bellevue. This mountain valley is underlain by the alluvial Wood River Valley aquifer system, which consists primarily of a single unconfined aquifer that underlies the entire valley, an underlying confined aquifer that is present only in the southernmost valley, and the confining unit that separates them. The entire population of the area depends on groundwater for domestic supply, either from domestic or municipal-supply wells, and rapid population growth since the 1970s has caused concern about the long-term sustainability of the groundwater resource. As part of an ongoing U.S. Geological Survey effort to characterize the groundwater resources of the Wood River Valley, this report describes the hydrogeologic framework of the Wood River Valley aquifer system. Although most of the Wood River Valley aquifer system is composed of Quaternary-age sediments and basalts of the Wood River Valley and its tributaries, older igneous, sedimentary, or metamorphic rocks that underlie these Quaternary deposits also are used for water supply. It is unclear to what extent these rocks are hydraulically connected to the main part of Wood River Valley aquifer system and thus whether they constitute separate aquifers. Paleozoic sedimentary rocks in and near the study area that produce water to wells and springs are the Phi Kappa and Trail Creek Formations (Ordovician and Silurian), the Milligen Formation (Devonian), and the Sun Valley Group including the Wood River Formation (Pennsylvanian-Permian) and the Dollarhide Formation (Permian). These sedimentary rocks are intruded by granitic rocks of the Late Cretaceous Idaho batholith. Eocene Challis Volcanic Group rocks overlie all of the older rocks (except where removed by erosion). Miocene Idavada Volcanics are found in the southern part of the study area. Most of these rocks have been folded, faulted, and metamorphosed to some degree, thus rock types and their relationships vary over distance. Quaternary-age sediment and basalt compose the primary source of groundwater in the Wood River Valley aquifer system. These Quaternary deposits can be divided into three units: a coarse-grained sand and gravel unit, a fine-grained silt and clay unit, and a single basalt unit. The fine- and coarse-grained units were primarily deposited as alluvium derived from glaciation in the surrounding mountains and upper reaches of tributary canyons. The basalt unit is found in the southeastern Bellevue fan area and is composed of two flows of different ages. Most of the groundwater produced from the Wood River Valley aquifer system is from the coarse-grained deposits. The altitude of the pre-Quaternary bedrock surface in the Wood River Valley was compiled from about 1,000 well-driller reports for boreholes drilled to bedrock and about 70 Horizontal-to-Vertical Spectral Ratio (HVSR) ambient-noise measurements. The bedrock surface generally mimics the land surface by decreasing down tributary canyons and the main valley from north to south; it ranges from more than 6,700 feet in Baker Creek to less than 4,600 feet in the central Bellevue fan. Most of the south-central portion of the Bellevue fan is underlain by an apparent topographically closed area on the bedrock surface that appears to drain to the southwest towards Stanton Crossing. Quaternary sediment thickness ranges from less than a foot on main and tributary valley margins to about 350 feet in the central Bellevue fan. Hydraulic conductivity for 81 wells in the study area was estimated from well-performance tests reported on well-driller reports. Estimated hydraulic conductivity for 79 wells completed in alluvium ranges from 1,900 feet per day (ft/d) along Warm Springs Creek to less than 1 ft/d in upper Croy Canyon. A well completed in bedrock had an estimated hydraulic conductivity value of 10 ft/d, one well completed in basalt had a value of 50 ft/d, and three wells completed in the confined system had values ranging from 32 to 52 ft/d. Subsurface outflow of groundwater from the Wood River Valley aquifer system into the eastern Snake River Plain aquifer was estimated to be 4,000 acre-feet per year. Groundwater outflow beneath Stanton Crossing to the Camas Prairie was estimated to be 300 acre-feet per year.

Idaho↗

USGS2014

Hydrogeologic framework, groundwater movement, and water budget of the Kitsap Peninsula, west-central Washington

This report presents information used to characterize the groundwater-flow system on the Kitsap Peninsula, and includes descriptions of the geology and hydrogeologic framework, groundwater recharge and discharge, groundwater levels and flow directions, seasonal groundwater-level fluctuations, interactions between aquifers and the surface‑water system, and a water budget. The Kitsap Peninsula is in the Puget Sound lowland of west-central Washington, is bounded by Puget Sound on the east and by Hood Canal on the west, and covers an area of about 575 square miles. The peninsula encompasses all of Kitsap County, the part of Mason County north of Hood Canal, and part of Pierce County west of Puget Sound. The peninsula is surrounded by saltwater and the hydrologic setting is similar to that of an island. The study area is underlain by a thick sequence of unconsolidated glacial and interglacial deposits that overlie sedimentary and volcanic bedrock units that crop out in the central part of the study area. Geologic units were grouped into 12 hydrogeologic units consisting of aquifers, confining units, and an underlying bedrock unit. A surficial hydrogeologic unit map was developed and used with well information from 2,116 drillers’ logs to construct 6 hydrogeologic sections and unit extent and thickness maps. Unconsolidated aquifers typically consist of moderately to well-sorted alluvial and glacial outwash deposits of sand, gravel, and cobbles, with minor lenses of silt and clay. These units often are discontinuous or isolated bodies and are of highly variable thickness. Unconfined conditions occur in areas where aquifer units are at land surface; however, much of the study area is mantled by glacial till, and confined aquifer conditions are common. Groundwater in the unconsolidated aquifers generally flows radially off the peninsula in the direction of Puget Sound and Hood Canal. These generalized flow patterns likely are complicated by the presence of low-permeability confining units that separate discontinuous bodies of aquifer material and act as local groundwater-flow barriers. Groundwater-level fluctuations observed during the monitoring period (2011–12) in wells completed in unconsolidated hydrogeologic units indicated seasonal variations ranging from 1 to about 20 feet. The largest fluctuation of 33 feet occurred in a well that was completed in the bedrock unit. Streamgage discharge measurements made during 2012 indicate that groundwater discharge to creeks in the area ranged from about 0.41 to 33.3 cubic feet per second. During 2012, which was an above-average year of precipitation, the groundwater system received an average of about 664,610 acre-feet of recharge from precipitation and 22,122 acre-feet of recharge from return flows. Most of this annual recharge (66 percent) discharged to streams, and only about 4 percent was withdrawn from wells. The remaining groundwater recharge (30 percent) left the groundwater system as discharge to Hood Canal and Puget Sound.

Washington↗

USGS2019

Aquifer storage change and storage properties, 2010–2017, in the Big Chino Subbasin, Yavapai County, Arizona

The Big Chino Subbasin is a groundwater basin that includes the Verde River headwaters in Yavapai County in north-central Arizona. Groundwater in the southern part of the subbasin is found primarily in the Big Chino and Williamson Valleys. The former is a potential municipal water source for growing communities in Yavapai County, particularly groundwater from the Big Chino Water Ranch, about 15 miles northwest of the community of Paulden. Groundwater in the Big Chino Valley discharges to wells (by pumping), by evapotranspiration, and to the upper Verde River springs, which form the headwaters of the Verde River. Groundwater also discharges to short perennial reaches of Williamson Valley Wash, Walnut Creek, and a small number of small, ungaged springs and seeps. To monitor changes in groundwater storage and to identify aquifer-storage properties, a network of repeat microgravity stations and groundwater-level monitoring stations was established in the Big Chino and Williamson Valleys in 2010. Small decreases in groundwater storage were observed throughout the study area from 2010 to 2017. Annual groundwater withdrawals for agricultural use varied between 2,800 and 4,000 acre-ft between 2013 and 2016, with an additional amount, probably less than 1,000 acre-ft, withdrawn for domestic use, primarily in the Paulden and Williamson Valley Wash areas. No local recharge events from sustained rainfall were observed during 2010 to 2017, and base-flow discharge in the Verde River near Paulden and Williamson Valley Wash near Paulden was consistently below the long-term average (for years 1964 to 2017 and 1966 to 2017, respectively) at each site. Relations between groundwater-level changes and aquifer-storage changes (determined from repeat microgravity data) indicate monitoring wells are representative primarily of semiconfined aquifer conditions in the Paulden area, the area west of Big Chino Wash, and the Big Chino Water Ranch area. Unconfined aquifer conditions are monitored in the Williamson Valley Wash area and at two sites in the Paulden area. Specific yield was estimated at five wells and ranged between 0.04 and 0.34, with a median value of 0.23. Negative groundwater-level trends (increasing depth to water) were observed between 2010 and 2017 at all sites where trends were identified using the Mann-Kendall trend test, except for the northernmost reaches of Big Chino Wash within and to the north of the Big Chino Water Ranch. Groundwater storage trends were negative at all sites where trends were identified except for one site in the foothills of the Santa Maria mountains west of Big Chino Wash. Declining storage in the Big Chino Water Ranch area, where water levels show no trend or are increasing, are likely the result of drying conditions in the unsaturated zone and (or) aquifers located above the aquifer(s) monitored by wells.

Arizona↗

USGS2016

The source of groundwater and solutes to Many Devils Wash at a former uranium mill site in Shiprock, New Mexico

The Shiprock Disposal Site is the location of the former Navajo Mill (Mill), a uranium ore-processing facility, located on a terrace overlooking the San Juan River in the town of Shiprock, New Mexico. Following the closure of the Mill, all tailings and associated materials were encapsulated in a disposal cell built on top of the former Mill and tailings piles. The milling operations, conducted at the site from 1954 to 1968, created radioactive tailings and process-related wastes that are now found in the groundwater. Elevated concentrations of constituents of concern—ammonium, manganese, nitrate, selenium, strontium, sulfate, and uranium—have also been measured in groundwater seeps in the nearby Many Devils Wash arroyo, leading to the inference that these constituents originated from the Mill. These constituents have also been reported in groundwater that is associated with Mancos Shale, the bedrock that underlies the site. The objective of this report is to increase understanding of the source of water and solutes to the groundwater beneath Many Devils Wash and to establish the background concentrations for groundwater that is in contact with the Mancos Shale at the site. This report presents evidence on three working hypotheses: (1) the water and solutes in Many Devils Wash originated from the operations at the former Mill, (2) groundwater in deep aquifers is upwelling under artesian pressure to recharge the shallow groundwater beneath Many Devils Wash, and (3) the groundwater beneath Many Devils Wash originates as precipitation that infiltrates into the shallow aquifer system and discharges to Many Devils Wash in a series of springs on the east side of the wash. The solute concentrations in the shallow groundwater of Many Devils Wash would result from the interaction of the water and the Mancos Shale if the source of water was upwelling from deep aquifers or precipitation. In order to compare the groundwater from various wells to groundwater that has been affected by Mill activities, a classification system was developed to determine which wells were most likely to have been affected. Affects to groundwater by the Mill were determined by using the reported uranium alpha activity ratios measured in groundwater samples, along with the concentration of the uranium and the location of the wells relative to the Mill. Activity ratios of 1.2 or less were determined to be the most reliable indicator of Mill-affected groundwater. Wells with samples that had a reported activity ratio of 1.2 or less were classified as Mill affected. To compare groundwater with background water-quality, data from groundwater seeps and springs in the Upper Eagle Nest Arroyo and Salt Creek Wash, located north of the San Juan River, are also presented and analyzed. Based on groundwater elevations and tritium concentrations measured in wells located between the disposal cell and Many Devils Wash, Mill water is not likely to reach Many Devils Wash. The tritium concentrations also indicate that groundwater from the Mill has not substantially affected Many Devils Wash in the past. Upwelling from deep aquifers was also determined to be an unlikely source, primarily by comparing the composition of the stable isotopes of water in the shallow groundwater with those reported in groundwater samples from the deeper aquifers. The stable-isotope compositions of the shallow groundwater around the site are enriched relative to the San Juan River and local meteoric lines, which suggests that most of the shallow groundwater has been influenced by evaporation and therefore was recharged at the surface. Several observations indicate that focused recharge is the likely source of groundwater in the area of Many Devils Wash. The visible erosional features in Many Devils Wash provide evidence of piping and groundwater sapping, and the distribution and type of vegetation in Many Devils Wash suggest that the focused recharge of precipitation is occurring. The estimated recharge from precipitation was calculated to be 0.0008 inches per year (in/yr) by using the mass-balance approach from reported seep discharge and 0.0011 in/yr using the chloride mass-balance approach. A conceptual model of groundwater quality beneath Many Devils Wash is presented to explain the source of solutes in the groundwater beneath Many Devils Wash. The major-ion concentrations and geochemical evolution in the groundwater beneath Many Devils Wash and across the study area support the conceptual model that the underlying Mancos Shale is the source of solutes. Differences in the major-ion composition between groundwater samples collected around the site, result from the degree of weathering to the Mancos Shale. The cation distribution appears to be an indicator of effects from the Mill, with samples from the Mill-affected wells largely having a calcium/magnesium-sulfate composition that resembles the reported compositions of more weathered shale; however, that composition could change if the Mill-processed water flowed into areas where the Mancos Shale was less weathered. On the basis of the widespread presence of uranium in the Mancos Shale and the distribution of aqueous uranium in the analog sites and other sites in the region, it appears likely that uranium in the groundwater of Many Devils Wash is naturally sourced from the Mancos Shale.

New Mexico↗

USGS2015

Hydrogeology of the Ramapo River-Woodbury Creek valley-fill aquifer system and adjacent areas in eastern Orange County, New York

The hydrogeology of the valley-fill aquifer system and surrounding watershed areas was investigated within a 23-mile long, fault-controlled valley in eastern Orange County, New York. Glacial deposits form a divide within the valley that is drained to the north by Woodbury Creek and is drained to the south by the Ramapo River. Surficial geology, extent and saturated thickness of sand and gravel aquifers, extent of confining units, bedrock-surface elevation beneath valleys, major lineaments, and the locations of wells for which records are available were delineated on an interactive map. Currently (2013), groundwater is the primary source of water supply in the study area. Several public water-supply systems withdraw groundwater from production wells in valley areas; elsewhere, domestic wells are used for water supply. Community-supply wells tap both sand and gravel and fractured bedrock aquifers; most domestic wells tap fractured-bedrock aquifers. Thick, saturated sand and gravel deposits are limited in areal extent but form several localized, productive aquifer zones within the valley-fill sediments. Hydraulic interconnection among these zones is largely untested. Fine-grained lacustrine deposits form extensive confining units above some aquifer material. Till deposits that extend into valleys also confine sand and gravel or bedrock aquifers. The study area was divided into three sections—south, central, and north. The south section of the study area, from Harriman south to the Rockland County and New Jersey borders, includes the south-draining valleys of the Ramapo River and Summit Brook. South of the wide valley area at Harriman, the valleys are narrow and the valley-fill aquifers are largely untested; the most favorable aquifer conditions are likely at Arden and where major tributary streams enter the valley, between Southfields and We-Wah Lake. At Harriman, the Ramapo River valley fill has water-resource potential from ice-contact sand and gravel deposits. The central section of the study area encompasses the headwater drainage area of the Ramapo River, from Harriman to Monroe and Kiryas Joel. The valley-fill aquifer material is generally thin, mostly unconfined, and underlain by glacial till. Shallow production wells tap parts of this aquifer, and appear most productive when sited near surface-water bodies. Production wells in the section are frequently completed in the underlying bedrock. The north section of the study area encompasses the watershed of north-draining Woodbury Creek to just north of its confluence with Moodna Creek. The width of the valley bottom and type of valley-fill deposits vary considerably within the valley. The section likely has the greatest water-resource potential—both confined and unconfined aquifers are present and the village of Woodbury and town of Cornwall draw water supply from production wells. Aquifer potential appears most promising north of Central Valley, but several areas in this section are largely untested. Valley-fill aquifers are modest resources within the area, as indicated by the common practice of completing supply wells in the underlying bedrock rather than the overlying glacial deposits. Groundwater turbidity problems curtail use of the resource. However, additional groundwater resources have been identified by test drilling, and there are remaining untested areas. New groundwater supplies that stress localized aquifer areas will alter the groundwater flow system. Considerations include potential water-quality degradation from nearby land use(s) and, where withdrawals induce infiltration of surface-water, balancing withdrawals with flow requirements for downstream users or for maintenance of stream ecological health.

New York↗