Late quaternary paleoseismology of the west valley fault zone: Insights from the Baileys Lake trench site
Explore the source record for details and available documents.
Utah Geological Survey Special Study↗
SEARCH · USGS Science
Results for “Utah Geological Survey Special Study”
Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Bedrock aquifers in the northern San Rafael Swell area, Utah, with special emphasis on the Navajo Sandstone
This report presents the results of a study of bedrock aquifers in the northern San Rafael Swell area, Utah (fig. 1), with special emphasis on the Navajo Sandstone of Triassic(?) and Jurassic age. The study was made by the U.S. Geological Survey in cooperation with the Utah Department of Natural Resources, Division of Water Rights. Fieldwork was done mainly during March 1979-July 1980, with supplemental testing and observations during August-December 1980. The principal objectives of this study were to determine: (1) Well yields of the bedrock formations, (2) the capability of formations to yield, over the long term, water chemically suitable for presently (1980) known uses, and (3) effects of withdrawals from wells on the surface-water supply in the Colorado River Basin.
Utah↗
Stream measurement work: Chapter 9 in Thirteenth biennial report of the State Engineer to the governor of Utah: 1921-1922
Systematic stream measurement work was probably first undertaken in Utah when the United States Geological Survey in 1888 began collecting records of flow of certain streams in the West in connection with special studies relating to irrigation in the arid sections. Since 1895 Congress has made small appropriations “for gaging the streams and determining the water supply of the United States.” These appropriations have permitted of federal allotments in each State only sufficient to carry on a limited amount of investigation and in recent years many private and State organizations have co-operated wither by furnishing data or by making appropriations to assist in collecting data. This co-operation has more than doubled the extent of the work carried out by the Surface Water division of the Geological Survey.
Utah↗
Fault trace mapping and surface-fault-rupture special study zone delineation of the Wasatch Fault Zone, Utah and Idaho
The Wasatch fault zone (WFZ) is a 220-mile-long (350-km) fault zone divided into 10 structural segments extending from southeastern Idaho to central Utah. The central five segments of the WFZ underlie the densely populated Wasatch Front region, where the majority of Utah’s population and economy are proximal to the fault zone. The West Valley fault zone (WVFZ) is an antithetic structure related to the WFZ and runs through the Salt Lake Valley. Communities on or adjacent to the WFZ are at risk of earthquake damage, due to their proximity to the fault zones. During 2016–2018, the Utah Geological Survey and a U.S. Geological Survey collaborator performed updated fault mapping of 39 7.5' quadrangles along the WFZ using recently acquired high-resolution topographic data derived from airborne light detection and ranging (lidar) elevation data. Previous geologic mapping, paleoseismic investigations, historical aerial photography, and field investigations were also used to identify and map surface fault traces and infer fault locations. Special study zones were delineated around fault traces to facilitate understanding of the surface-rupturing hazard and associated risk. Defining these special study zones encourages the creation and implementation of municipal and county geologic-hazard ordinances dealing with hazardous faults. We identified potential paleoseismic investigation sites where fault scarps appear relatively pristine, are located in geologically favorable settings, and where additional earthquake timing data would be beneficial to the continued earthquake research of the WFZ. The fault geometries, attributes, and special study zones were published in the online Utah Geologic Hazards Portal simultaneously with this Report of Investigation (RI). This report contains supplementary material describing the data and methods used to perform the mapping and in locating potential paleoseismic investigation sites in the study area. This work is critical to raise awareness of earthquake hazards in areas of Utah experiencing rapid growth.
Idaho, Utah↗
Stream measurement work: Appendix 4 in Nineteenth biennial report of the State Engineer to the governor of Utah: 1933-1934
Stream measurement work under the usual co-operative agreement between the U.S. Geological Survey and the State Engineer continued during the biennium for the purpose of determining the water resources of the State. This work in Utah is part of the general plan for a systematic determination of the water resources of the United States begun by the Geological Survey in 1888. Records of stream flow on a few rivers in the West were taken as part of special studies on irrigation, in which connection gaging stations were established on the Bear, Weber, Provo, and Sevier rivers. The Bear River station at Collinston has been maintained continuously since that date.
Utah↗
Economic geology of the Bingham mining district, Utah
The field work of which this report represents the final results was first undertaken in the summer of the year 1900. This district had long been selected by the writer as worthy of special economic investigation, as well on account of the importance of its products as because of its geological structure and the peculiar relations of its ore deposits. It was not, however, until the summer mentioned above that the means at the disposal of the Survey, both pecuniary and scientific, justified its undertaking. As originally planned, the areal or surface geology was to have been worked out by Mr. Keith, who had already spent many years in unraveling the complicated geological structure of the Appalachian province, while Mr. Boutwell, who had more recently become attached to the Survey, was to have charge of the underground geology, or a study of the ore deposits, under the immediate supervision of the writer. When the time came for actually taking the field, it was found that the pressure of other work would not permit Mr. Keith to carry out fully the part allotted to him, and in consequence a part of his field work has fallen to Mr. Boutwell. Field work was commenced by the writer and Mr. Boutwell early in July, 1900. Mr. Keith joined the party on August 10, but was obliged to leave for other duties early in September. Mr. Boutwell carried on his field work continuously from July until December, taking up underground work after the snowfall had rendered work on the surface geology impracticable. The geological structure had proved to be unexpectedly intricate and complicated, so that, on the opening of the field season of 1901, it was found necessary to make further study in the light of results already worked out, and Mr. Boutwell spent some weeks in the district in the early summer of 1901. His field work that year, partly in California and partly in Arizona, as assistant to Mr. Waldemar Lindgren, lasted through the summer and winter and well into the spring of 1902, so that but little time , was left before he was obliged to take the field again in his study of the Park City district of Utah. Mr. Keith had been too closely occupied with his Appalachian work to complete his part,' and thus the publication of this report has been unusually delayed. While the delay is a cause for regret, this regret is much tempered by the consideration that had the report been published earlier many facts brought to light during the vigorous development of the region in late years, which have an important bearing upon the structure and genesis of the ore deposits, could not have been used in its preparation.
Utah↗
Geology and mining industry of the Tintic district, Utah: Section in Nineteenth Annual Report of the United States Geological Survey to the Secretary of the Interior 1897 - 1898: Part III - Economic Geology
The field work upon which this report is based was begun in July, 1897, and continued without interruption until December of the same year. The area studied is approximately 15 miles square and contains 234 square miles. The topographic maps, which are two in number, were prepared under the direction of Mr. R. U. Goode, Mr. S. S. Gannett doing the triangulation and Messrs. Marshall and Griswold the topography in the fall of 1896 and summer of 1897. The mapping is done on two scales; the larger area, approximately 15 miles square, is mapped on a scale of 1: 62,500. This map is designed to form a part of the Geologic Atlas of the United States. The other map represents the portion of the larger area in which the majority of the mines are located. It is on a scale of 1: 9,600, and covers an area of 12 square miles. The work has been greatly facilitated through the assistance rendered by the mining men of the district, among whom special thanks are due to Messrs. G. H. Robinson, W. J. Craig, W. M. Nesbit, and C. H. Blanchard. The chemical work on the ores and country rocks from the district has been done in the laboratory of the Survey by Messrs. H. N. Stokes and George Steiger, and the determination of the fossils collected is to be credited to Mr. G. H. Girty, also of the Geological Survey. In the field work the authors have cooperated constantly on every phase of the varied problems. The same is true for the office work, except that the stratigraphic and economic problems have been the especial studies of Mr. Tower, while the petrologic and remaining problems have been the special studies of Mr. Smith. In pursuance of this system of work the introduction has been written conjointly, Chapter II of Part I and all of Part II have been written by Mr. Tower, and Chapters I and III to VII of Part I by Mr. Smith.
Utah↗
Intrusive rock database for the Digital Geologic Map of Utah
Digital geologic maps offer the promise of rapid and powerful answers to geologic questions using Geographic Information System software (GIS). Using modern GIS and database methods, a specialized derivative map can be easily prepared. An important limitation can be shortcomings in the information provided in the database associated with the digital map, a database which is often based on the legend of the original map. The purpose of this report is to show how the compilation of additional information can, when prepared as a database that can be used with the digital map, be used to create some types of derivative maps that are not possible with the original digital map and database. This Open-file Report consists of computer files with information about intrusive rocks in Utah that can be linked to the Digital Geologic Map of Utah (Hintze et al., 2000), an explanation of how to link the databases and map, and a list of references for the databases. The digital map, which represents the 1:500,000-scale Geologic Map of Utah (Hintze, 1980), can be obtained from the Utah Geological Survey (Map 179DM). Each polygon in the map has a unique identification number. We selected the polygons identified on the geologic map as intrusive rock, and constructed a database (UT_PLUT.xls) that classifies the polygons into plutonic map units (see tables). These plutonic map units are the key information that is used to relate the compiled information to the polygons on the map. The map includes a few polygons that were coded as intrusive on the state map but are largely volcanic rock; in these cases we note the volcanic rock names (rhyolite and latite) as used in the original sources Some polygons identified on the digital state map as intrusive rock were misidentified; these polygons are noted in a separate table of the database, along with some information about their true character. Fields may be empty because of lack of information from references used or difficulty in finding information. The information in the database is from a variety of sources, including geologic maps at scales ranging from 1:500,000 to 1:24,000, and thesis monographs. The references are shown twice: alphabetically and by region. The digital geologic map of Utah (Hintze and others, 2000) classifies intrusive rocks into only 3 categories, distinguished by age. They are: Ti, Tertiary intrusive rock; Ji, Upper to Middle Jurassic granite to quartz monzonite; and pCi, Early Proterozoic to Late Archean intrusive rock. Use of the tables provided in this report will permit selection and classification of those rocks by lithology and age. This database is a pilot study by the Survey and Analysis Project of the U.S. Geological Survey to characterize igneous rocks and link them to a digital map. The database, and others like it, will evolve as the project continues and other states are completed. We release this version now as an example, as a reference, and for those interested in Utah plutonic rocks.
Utah↗
Introduction to paleoenvironments of Bear Lake, Utah and Idaho, and its catchment
In 1996 a group led by the late Kerry Kelts (University of Minnesota) and Robert Thompson (U.S. Geological Survey) acquired three piston cores (BL96-1, -2, and -3) from Bear Lake. The coring arose from their recognition of Bear Lake as a potential repository of long records of paleoenvironmental change. They recognized that the lake is located in an area that is sensitive to changes in regional climate patterns (Dean et al., this volume), that the lake basin is long lived (see Colman, 2006; Kaufman et al., this volume), and that, unlike many lakes in the Great Basin, Bear Lake was never dry during warm dry periods. Bear Lake lies in the northeastern Great Basin to the northeast of Great Salt Lake, just south of the Snake River drainage, and a short distance west of the Green River drainage that makes up part of the Upper Colorado River Basin (Fig. 1). Similarity among the historic Bear Lake and Great Salt Lake hydrographs and flows on the Green River indicates that the hydrology of Bear Lake reflects regional precipitation (Fig. 2). Therefore, paleorecords from Bear Lake are important to understanding past climate for a large region, including the Upper Colorado River Basin, the source of much of the water for the southwestern United States. Initially, paleoenvironmental studies of Bear Lake sediments focused on cores BL96-1, -2, and -3. Additional coring was conducted to elucidate the spatial distribution of sedimentary units and to extend the record back in time. The study was also expanded to include extensive study of the catchment, including the properties of catchment materials and the processes that could potentially affect the delivery of catchment materials to the lake. Cores BL96-1, -2, and -3 were taken with a Kullenburg piston corer along an east–west profile in roughly 50, 40, and 30 m of water, respectively (Table 1, Fig. 3). These three cores, each taken as a single 4- to 5-m-long segment, provide a nearly complete composite section from ca. 26 cal ka to the late Holocene. In 1998 a number of short gravity cores were taken from the uppermost water-rich sediments that were not sampled by the 1996 cores. During 2000, cores were taken with a percussion piston corer (manufactured by UWITEC) at three locations in and around Mud Lake and at two locations in the northern end of Bear Lake (Fig. 3). Cores acquired with the percussion corer comprise as many as three overlapping segments up to 2 m in length. In 2002, additional percussion piston cores and associated gravity cores of the uppermost sediments were acquired from five sites in the northern half of the lake. In conjunction with two of the cores collected in 2000, these cores form a north–south profile along a seismic line and span water depths from less than 10 m to ~40 m. Data from this profile provide much of the evidence for lake-level variations (Smoot and Rosenbaum, this volume). Finally, during 2000, two long cores, BL00-1D and -1E (collectively referred to here simply as BL00-1), were taken at a site near the depocenter during testing of the GLAD800 coring platform (Fig. 4; Dean et al., 2002). These cores provide a record back to ca. 220 ka.
Idaho;Utah;Wyoming↗