USGS Science⌕ Search

SEARCH · USGS Science

Results for “Ocean Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
USGS1990

Geotechnical engineering for ocean waste disposal. An introduction

As members of multidisciplinary teams, geotechnical engineers apply quantitative knowledge about the behavior of earth materials toward designing systems for disposing of wastes in the oceans and monitoring waste disposal sites. In dredge material disposal, geotechnical engineers assist in selecting disposal equipment, predict stable characteristics of dredge mounds, design mound caps, and predict erodibility of the material. In canister disposal, geotechnical engineers assist in specifying canister configurations, predict penetration depths into the seafloor, and predict and monitor canister performance following emplacement. With sewage outfalls, geotechnical engineers design foundation and anchor elements, estimate scour potential around the outfalls, and determine the stability of deposits made up of discharged material. With landfills, geotechnical engineers evaluate the stability and erodibility of margins and estimate settlement and cracking of the landfill mass. Geotechnical engineers also consider the influence that pollutants have on the engineering behavior of marine sediment and the extent to which changes in behavior affect the performance of structures founded on the sediment. In each of these roles, careful application of geotechnical engineering principles can contribute toward more efficient and environmentally safe waste disposal operations.

Conference Paper↗
USGS2008

Time-averaged near-bed suspended sediment concentrations under waves and currents: Comparison of measured and model estimates

Profiles of suspended sediment concentration and velocity were measured over a 15-day period at a near-shore site off Santa Cruz, CA in Monterey Bay. The concentration and velocity data were collected with an Acoustic Backscattering System (ABS) and Acoustic Current Profiler (ACP) that were mounted on a bottom tripod. High-resolution bottom scanning sonar was also attached to the tripod to provide images of bed features during the experiment. Hourly time-averaged near-bed concentrations of suspended sediment were calculated from three models and compared with the measurements. Surface waves and currents that were generated by a storm of moderate intensity caused bed stresses that exceeded threshold stress for D 50 =0.02 cm, the median size of the moderately well-sorted bottom sediment, over a period of about 7 days. Estimates of the concentration at 1 cm above the bottom, C a1 , were obtained using the ABS measurements. These observations have been compared with predictions for the concentration at 1 cm above the bottom, C 1 . Nielsen's models for reference concentration C o [Nielsen, P., 1986. Suspended sediment concentrations under waves. Coastal Engineering 10, 32-31; Nielsen, P., 1992. Coastal Bottom Boundary Layers and Sediment Transport, Advanced Series on Ocean Engineering. World Scientific, Hackensack, NJ.] are purely wave-based and do not include effects of bottom currents on bed stress and bedform scales. C 1 calculated from this model compared well with measured C a1 when currents were weak and small oscillatory ripples were observed in the sonar images. However, during the 3-day period of highest bottom stresses modeled C 1 did not compare well to C a1 . The other two models for C 1 , Glenn and Grant [Glenn, S.M., Grant, W.D., 1987. A suspended sediment stratification correction for combined wave and current flows. Journal of Geophysical Research 92(C8), 8244-8264.] and van Rijn and Walstra [Van Rijn, L.C., Walstra, D.J.R., 2004. Description of TRANSPOR2004 and implementation in Delft3D-ONLINE. Interim Report prepared for DG Rijkswaterstaat, Rijksinstituut voor Kust en Zee. Delft Hydraulics Institute, The Netherlands.], accounted for combined wave-current stresses and included different formulations for predicting bedform scales. C 1 calculated from these models compared well with measurements throughout the early and middle period of the storm, but underpredicted measured values during the latter part of the experiment. An alternative method based on dimensional analysis provided a straightforward way to relate C 1 to bed stress and sediment parameters. This new relationship based on dimensional analysis explained about 77% of the variability in C a1 derived from the ABS data.

California↗
USGS2011

Building destruction from waves and surge on the bolivar peninsula during hurricane ike

The Bolivar Peninsula in Texas was severely impacted by Hurricane Ike with strong winds, large waves, widespread inundation, and severe damage. This paper examines the wave and surge climate on Bolivar during the storm and the consequent survival and destruction of buildings. Emphasis is placed on differences between buildings that survived (with varying degrees of damage) and buildings that were completely destroyed. Building elevations are found to be the primary indicator of survival for areas with large waves. Here, buildings that were sufficiently elevated above waves and surge suffered relatively little structural damage, while houses at lower elevations were impacted by large waves and generally completely destroyed. In many areas, the transition from destruction to survival was over a very small elevation range of around 0.5 m. In areas where waves were smaller, survival was possible at much lower elevations. Higher houses that were not inundated still survived, but well-built houses at lower elevations could also survive as the waves were not large enough to cause structural damage. However, the transition height where waves became damaging could not be determined from this study. ?? 2011 American Society of Civil Engineers.

Journal of Waterway, Port, Coastal and Ocean Engin↗
USGS1982

An oilspill trajectory analysis model with a variable wind deflection angle

The oilspill trajectory movement algorithm consists of a vector sum of the surface drift component due to wind and the surface current component. In the U.S. Geological Survey oilspill trajectory analysis model, the surface drift component is assumed to be 3.5% of the wind speed and is rotated 20 degrees clockwise to account for Coriolis effects in the Northern Hemisphere. Field and laboratory data suggest, however, that the deflection angle of the surface drift current can be highly variable. An empirical formula, based on field observations and theoretical arguments relating wind speed to deflection angle, was used to calculate a new deflection angle at each time step in the model. Comparisons of oilspill contact probabilities to coastal areas calculated for constant and variable deflection angles showed that the model is insensitive to this changing angle at low wind speeds. At high wind speeds, some statistically significant differences in contact probabilities did appear.

Ocean Engineering↗
USGS2022

Data-driven modeling of wind waves in upper Delaware Bay with living shorelines

Living shoreline projects have been built to preserve coastal ecosystems under future climate change and sea level rise. To quantify the wave power variation across living shorelines, the wave characteristics around the constructed oyster reefs (CORs) in upper Delaware Bay were investigated in this study. Wave parameters seaward and shoreward of CORs were recorded by wave gauges in early 2018. Four winter storms happened in this period and induced strong winds and coastal flooding at the study site. To estimate the wind wave characteristics across the CORs on a yearly basis, soft computing-based models combining fully connected neural networks and long short-term memory were developed to extend the two-month energetic wave measurements. The results show that when CORs were emergent or slightly submerged, the averaged wave height attenuation was about 39.8% from the offshore gauge to the nearshore gauge (behind CORs) during 2018–2020, owing to the combined effect of nearshore bathymetric changes and CORs. Furthermore, it was found that the annually averaged wave power reduction from offshore to nearshore at the study site was about 30.0% in 2018, 2019, and 2020. This study provides a novel framework to predict long-term wave characteristics based on short-term wave measurements using soft computing-based models.

New Jersey↗
USGS2023

Modeling surface wave dynamics in upper Delaware Bay with living shorelines

Living shorelines gain increasing attention because they stabilize shorelines and reduce erosion. This study leverages physics-based models and bagged regression tree (BRT) machine learning algorithm to simulate wave dynamics at a living shoreline composed of constructed oyster reefs (CORs) in upper Delaware Bay. The physics-based models consist of coupled Delft3D-FLOW and SWAN in four-level nested domains. The model accuracy converges with increasing mesh resolution. The simulated wave-induced current circulation substantiates the effectiveness of CORs in trapping sediments. The simulated yearly-averaged wave power correlates qualitatively with historical shoreline retreat rates. BRT is adopted to improve the model accuracy, identify key processes responsible for simulation errors in wave height ( H 8 ) and wave period ( T p ), and quantify their importance. In the CORs sheltered area, BRT reveals that simulation errors of wind seas mainly arise from wind forcing, wave breaking and wave triad interactions. Wave breaking is seven times more important than wind forcing for simulating H 8 , while wind forcing and triad interactions are of equal importance for simulating T p . Simulation errors of swells mostly stem from bottom friction and offshore wave boundary conditions. Results from this study can help the assessment and adaptive management of CORs-based living shoreline restoration projects under climate change.

New Jersey↗
USGS1994

Simulating effects of highway embankments on estuarine circulation

A two‐dimensional, depth‐averaged, finite‐difference, numerical model was used to simulate tidal circulation and mass transport in the Port Royal Sound, South Carolina, estuarine system. The purpose of the study was to demonstrate the utility of the Surface‐Water, Integrated, Flow and Transport model (SWIFT2D) for evaluating changes in circulation patterns and mass transport caused by highway‐crossing embankments. A model of a subregion of Port Royal Sound including the highway crossings and having a grid size of 61 m (200 ft) was derived from a 183‐m (600‐ft) model of the entire Port Royal Sound estuarine system. The 183‐m model was used to compute boundary‐value data for the 61‐m submodel, which was then used to simulate flow conditions with and without the highway embankments in place. The numerical simulations show that, with the highway embankments in place, mass transport between the Broad River and Battery Creek is reduced and mass transport between the Beaufort River and Battery Creek is increased. The net result is that mass transport into and out of upper Battery Creek is reduced. The presence of the embankments also alters circulation patterns within Battery Creek.

Journal of Waterway, Port, Coastal and Ocean Engin↗
USGS1997

Effect of wave-enhanced bottom friction on storm-driven circulation in Massachusetts Bay

Massachusetts Bay is a shallow (35 m average depth) semienclosed embayment, roughly 100 ?? 50 km, which opens into the Gulf of Maine at its eastern boundary. Surface waves associated with winter storm winds from the northeast cause large sediment resuspension events, and wave and circulation fields during these events have a quasi-steady response to the wind stress. Coupled wave, circulation, and boundary layer models indicate that wave-enhanced bottom friction has a significant damping effect on storm-driven circulation in Massachusetts Bay. The simulated response exhibits significant three-dimensional structure, but still can be fundamentally understood using idealized models. The depth-integrated momentum balance is dominated by along-bay stress, pressure gradient, and bottom stress. The effective bottom drag coefficient during typical storm conditions is increased by a factor of 2-5 when wave effects are included, but the mean bottom stress is relatively unaffected by wave effects due to a reduction in bottom currents by 30-50%. The vertical mixing is also relatively unaffected by the waves, and the result is that the increased drag causes a nearly depth-independent offset of the vertical current profiles. The alongshore transport in the bay is reduced 10-50%, depending on wind direction.

Cape Cod Bay, Massachussetts Bay↗
USGS1998

Hydrodynamic forcing and sediment character in Boston Harbor

Calculated annual excess skin friction stress at various locations in Quincy Bay (outer Boston Harbor) was found to be correlated positively with sediment sand content. The correlation was optimized when a critical shear stress (??c) of 0.085 Pa was assumed for the bay. The excess shear stress was correlated negatively with sediment lead (Pb) and polychlorinated biphenyl (PCB) concentrations. These correlations suggest that area surveys of properties like sand content may be sufficient to estimate ??C.

Massachussetts↗
USGS2001

Factors controlling navigation-channel Shoaling in Laguna Madre, Texas

Shoaling in the Gulf Intracoastal Waterway of Laguna Madre, Tex., is caused primarily by recycling of dredged sediments. Sediment recycling, which is controlled by water depth and location with respect to the predominant wind-driven currents, is minimal where dredged material is placed on tidal flats that are either flooded infrequently or where the water is extremely shallow. In contrast, nearly all of the dredged material placed in open water >1.5 m deep is reworked and either transported back into the channel or dispersed into the surrounding lagoon. A sediment flux analysis incorporating geotechnical properties demonstrated that erosion and not postemplacement compaction caused most sediment losses from the placement areas. Comparing sediment properties in the placement areas and natural lagoon indicated that the remaining dredged material is mostly a residual of initial channel construction. Experimental containment designs (shallow subaqueous mound, submerged levee, and emergent levee) constructed in high-maintenance areas to reduce reworking did not retain large volumes of dredged material. The emergent levee provided the greatest retention potential approximately 2 years after construction.

Journal of Waterway, Port, Coastal and Ocean Engin↗
USGS2003

Longshore sediment transport rates on a microtidal estuarine beach

Longshore sediment transport rates were estimated on a microtidal estuarine beach in Great South Bay, N.Y., during two dyed sand tracer experiments using a temporal sampling method. Mean onshore wind speeds of 5.8 and 9.9 m/s resulted in root-mean-square wave heights of 0.07 and 0.08 m and wave angles of 3.0 and 10.1, causing transport rates of 0.468 and 0.972 m3/h. Rates were 3.1 to 6.5 times greater than predicted by existing equations using standard coefficients. Greater rates are attributed to the concentration of sediment transport in the energetic swash zone under plunging breakers.

Journal of Waterway, Port, Coastal and Ocean Engin↗
USGS2004

Estimation of contraction scour in riverbed using SERF

Contraction scour in a firm-clay estuarine riverbed is estimated at an oil-unloading terminal at the Port of Haldia in India, where a scour hole attained a maximum depth greater than 5 m relative to the original bottom. A linear equation for the erosion flux as a function of the excess bed shear stress was semicalibrated in a rotating-cylinder device called SERF (Simulator of Erosion Rate Function) and coupled to a hydrodynamic code to simulate the hole as a clear-water scour process. SERF, whose essential design is based on previous such devices, additionally included a load cell for in situ and rapid measurement of the eroded sediment mass. Based on SERF's performance and the degree of comparison between measured and simulated hole geometry, it appears that this device holds promise as a simple tool for prediction of scour in firm-clay beds. ?? ASCE.

Journal of Waterway, Port, Coastal and Ocean Engin↗
USGS2004

One-dimensional wave bottom boundary layer model comparison: Specific eddy viscosity and turbulence closure models

Six one-dimensional-vertical wave bottom boundary layer models are analyzed based on different methods for estimating the turbulent eddy viscosity: Laminar, linear, parabolic, k —one equation turbulence closure, k−ε —two equation turbulence closure, and k−ω —two equation turbulence closure. Resultant velocity profiles, bed shear stresses, and turbulent kinetic energy are compared to laboratory data of oscillatory flow over smooth and rough beds. Bed shear stress estimates for the smooth bed case were most closely predicted by the k−ω model. Normalized errors between model predictions and measurements of velocity profiles over the entire computational domain collected at 15° intervals for one-half a wave cycle show that overall the linear model was most accurate. The least accurate were the laminar and k−ε models. Normalized errors between model predictions and turbulence kinetic energy profiles showed that the k−ω model was most accurate. Based on these findings, when the smallest overall velocity profile prediction error is required, the processing requirements and error analysis suggest that the linear eddy viscosity model is adequate. However, if accurate estimates of bed shear stress and TKE are required then, of the models tested, the k−ω model should be used.

Journal of Waterway, Port, Coastal and Ocean Engin↗
USGS2012

Process-based coastal erosion modeling for Drew Point (North Slope, Alaska)

A predictive, coastal erosion/shoreline change model has been developed for a small coastal segment near Drew Point, Beaufort Sea, Alaska. This coastal setting has experienced a dramatic increase in erosion since the early 2000’s. The bluffs at this site are 3-4 m tall and consist of ice-wedge bounded blocks of fine-grained sediments cemented by ice-rich permafrost and capped with a thin organic layer. The bluffs are typically fronted by a narrow ( ∼ 5 m wide) beach or none at all. During a storm surge, the sea contacts the base of the bluff and a niche is formed through thermal and mechanical erosion. The niche grows both vertically and laterally and eventually undermines the bluff, leading to block failure or collapse. The fallen block is then eroded both thermally and mechanically by waves and currents, which must occur before a new niche forming episode may begin. The erosion model explicitly accounts for and integrates a number of these processes including: (1) storm surge generation resulting from wind and atmospheric forcing, (2) erosional niche growth resulting from wave-induced turbulent heat transfer and sediment transport (using the Kobayashi niche erosion model), and (3) thermal and mechanical erosion of the fallen block. The model was calibrated with historic shoreline change data for one time period (1979-2002), and validated with a later time period (2002-2007).

Alaska↗
USGS2013

Assessing factors affecting the thermal properties of a passive thermal refuge using three-dimensional hydrodynamic flow and transport modeling

Everglades restoration activities may cause changes to temperature and salinity stratification at the Port of the Islands (POI) marina, which could affect its suitability as a cold weather refuge for manatees. To better understand how the Picayune Strand Restoration Project (PSRP) may alter this important resource in Collier County in southwestern Florida, the USGS has developed a three-dimensional hydrodynamic model for the marina and canal system at POI. Empirical data suggest that manatees aggregate at the site during winter because of thermal inversions that provide warmer water near the bottom that appears to only occur in the presence of salinity stratification. To study these phenomena, the environmental fluid dynamics code simulator was used to represent temperature and salinity transport within POI. Boundary inputs were generated using a larger two-dimensional model constructed with the flow and transport in a linked overland-aquifer density-dependent system simulator. Model results for a representative winter period match observed trends in salinity and temperature fluctuations and produce temperature inversions similar to observed values. Modified boundary conditions, representing proposed PSRP alterations, were also tested to examine the possible effect on the salinity stratification and temperature inversion within POI. Results show that during some periods, salinity stratification is reduced resulting in a subsequent reduction in temperature inversion compared with the existing conditions simulation. This may have an effect on POI’s suitability as a passive thermal refuge for manatees and other temperature-sensitive species. Additional testing was completed to determine the important physical relationships affecting POI’s suitability as a refuge.

Florida↗
USGS2021

Incorporating water quality analysis into navigation assessments as demonstrated in the Mississippi River Basin

A description of historical and ambient water quality conditions is often required as part of navigational studies. This paper describes a series of tools developed by the USGS that can aid navigation managers in developing water quality assessments. The tools use R, a statistical software program, and provide methods to retrieve historical streamflow and water quality data, summarize observations, model concentrations and fluxes, and estimate seasonal, annual, and decadal trends. The utility of these tools is demonstrated by providing an analysis of the seasonal variability and long-term trends of nitrate plus nitrite, orthophosphate, and suspended sediment concentrations and fluxes at nine sites in the Mississippi River Basin. Trends in annual mean concentration and flux showed fairly stable nitrate plus nitrite at most of the nine sites, with increases in the Upper Mississippi and Missouri Rivers and decreases on the Illinois River over a 40-year period beginning in 1980. Orthophosphate concentration or flux increased at almost all sites over a similar time period. Conversely, a concurrent steady decline in suspended sediment concentrations and fluxes was noted at sites throughout the basin.

Mississippi River Basin↗
USGS2021

Numerical simulation of the boundary layer flow generated in Monterey Bay, California by the 2010 Chilean tsunami: Case study

This work presents a case study involving the numerical simulation of the unsteady boundary layer generated by the 2010 Chilean tsunami, as measured by field equipment in Monterey Bay, California, USA. A one-dimensional vertical (1DV) boundary layer model is utilized, solving Reynolds-averaged Navier–Stokes equations, coupled with two-equation k – ω turbulence closure. Local effects of convective acceleration (converging–diverging effects) on the boundary layer due to the sloping bed are likewise approximated. Four cases are considered involving simulation of: (1) the long tsunami-induced boundary layer flow in isolation, in combination with either (2) convective acceleration effects or (3) energetic short wind waves, and, finally, (4) all effects combined. Reasonable agreement with field measurements is achieved, with model results similarly showing that the tsunami-induced boundary layer in this case only spans a fraction of the local water depth. Systematic comparison of the various cases likewise elucidates the likely significance of both local converging–diverging effects, as well as interaction with the much shorter period wind waves, on the tsunami-generated boundary layer. In the latter case, analogy is drawn to well-known wave–current boundary layer interaction, with the boundary layer turbulence associated with the short wind waves inducing an effective wave roughness felt by the tsunami-induced flow, which effectively plays the role of the current.

California↗
USGS2023

Advances in morphodynamic modeling of coastal barriers: A review

As scientific understanding of barrier morphodynamics has improved, so has the ability to reproduce observed phenomena and predict future barrier states using mathematical models. To use existing models effectively and improve them, it is important to understand the current state of morphodynamic modeling and the progress that has been made in the field. This manuscript offers a review of the literature regarding advancements in morphodynamic modeling of coastal barrier systems and summarizes current modeling abilities and limitations. Broadly, this review covers both event-scale and long-term morphodynamics. Each of these sections begins with an overview of commonly modeled phenomena and processes, followed by a review of modeling developments. After summarizing the advancements toward the stated modeling goals, we identify research gaps and suggestions for future research under the broad categories of improving our abilities to acquire and access data, furthering our scientific understanding of relevant processes, and advancing our modeling frameworks and approaches.

Virginia↗