USGS Science⌕ Search

SEARCH · USGS Science

Results for “IEEE Journal of Oceanic Engineering”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

13 recordsLinked to original sources
USGS1996

Vertical spatial coherence model for a transient signal forward-scattered from the sea surface

The treatment of acoustic energy forward scattered from the sea surface, which is modeled as a random communications scatter channel, is the basis for developing an expression for the time-dependent coherence function across a vertical receiving array. The derivation of this model uses linear filter theory applied to the Fresnel-corrected Kirchhoff approximation in obtaining an equation for the covariance function for the forward-scattered problem. The resulting formulation is used to study the dependence of the covariance on experimental and environmental factors. The modeled coherence functions are then formed for various geometrical and environmental parameters and compared to experimental data.

IEEE Journal of Oceanic Engineering↗
USGS2000

Methods for accurate estimation of net discharge in a tidal channel

Accurate estimates of net residual discharge in tidally affected rivers and estuaries are possible because of recently developed ultrasonic discharge measurement techniques. Previous discharge estimates using conventional mechanical current meters and methods based on stage/discharge relations or water slope measurements often yielded errors that were as great as or greater than the computed residual discharge. Ultrasonic measurement methods consist of: 1) the use of ultrasonic instruments for the measurement of a representative 'index' velocity used for in situ estimation of mean water velocity and 2) the use of the acoustic Doppler current discharge measurement system to calibrate the index velocity measurement data. Methods used to calibrate (rate) the index velocity to the channel velocity measured using the Acoustic Doppler Current Profiler are the most critical factors affecting the accuracy of net discharge estimation. The index velocity first must be related to mean channel velocity and then used to calculate instantaneous channel discharge. Finally, discharge is low-pass filtered to remove the effects of the tides. An ultrasonic velocity meter discharge-measurement site in a tidally affected region of the Sacramento-San Joaquin Rivers was used to study the accuracy of the index velocity calibration procedure. Calibration data consisting of ultrasonic velocity meter index velocity and concurrent acoustic Doppler discharge measurement data were collected during three time periods. Two sets of data were collected during a spring tide (monthly maximum tidal current) and one of data collected during a neap tide (monthly minimum tidal current). The relative magnitude of instrumental errors, acoustic Doppler discharge measurement errors, and calibration errors were evaluated. Calibration error was found to be the most significant source of error in estimating net discharge. Using a comprehensive calibration method, net discharge estimates developed from the three sets of calibration data differed by less than an average of 4 cubic meters per second, or less than 0.5% of a typical peak tidal discharge rate of 750 cubic meters per second.

IEEE Journal of Oceanic Engineering↗
USGS2001

Overview of SAX99: Environmental considerations

A 1-km2 area located 2 km off the Florida Pan-handle (30??22.6???N; 86??38.7???W) was selected as the site to conduct high-frequency acoustic seafloor penetration, sediment propagation, and bottom scattering experiments [1]. Side scan, multibeam, and normal incidence chirp acoustic surveys as well as subsequent video surveys, diver observations, and vibra coring, indicate a uniform distribution of surficial and subbottom seafloor characteristics within the area. The site, in 18-19 m of water, is characterized by 1-2-m thick fine-to-medium clean sand and meets the logistic and scientific requirements specified for the acoustic experiments. This paper provides a preliminary summary of the meteorological, oceanographic, and seafloor conditions found during the experiments and describes the important physical and biological process that control the spatial distribution and temporal changes in these characteristics.

IEEE Journal of Oceanic Engineering↗
USGS2002

Porometric properties of siliciclastic marine sand: A comparison of traditional laboratory measurements with image analysis and effective medium modeling

During the 1999 sediment acoustics experiment (SAX99), porometric properties were measured and predicted for a well sorted, medium sand using standard laboratory geotechnical methods and image analysis of resin-impregnated sediments. Sediment porosity measured by laboratory water-weight-loss methods (0.372 ?? 0.0073 for mean ??1 standard deviation) is 0.026 lower than determined by microscopic image analysis of resin-impregnated sediments (0.398 ?? 0.029). Values of intrinsic permeability (m2) determined from constant-head permeameter measurements (3.29 ?? 10-11 ?? 0.60 ?? 10-11) and by microscopic image analysis coupled with effective medium theory modeling (2.78 ?? 10-11 ?? 1.01 ?? 10-11) are nearly identical within measurement error. The mean value of tortuosity factor measured from images is 1.49 ?? 0.09, which is in agreement with tortuosity factor determined from electrical resistivity measurements. Slight heterogeneity and anisotropy are apparent in the top three centimeters of sediment as determined by image-based porometric property measurements. However, the overall similarity for both measured and predicted values of porosity and permeability among and within SAX99 sites indicates sediments are primarily homogeneous and isotropic and pore size distributions are fairly uniform. The results indicate that an effective medium theory technique and two-dimensional image analysis accurately predicts bulk permeability in resin-impregnated sands.

IEEE Journal of Oceanic Engineering↗
USGS2007

Predicting seabed burial of cylinders by wave-induced scour: Application to the sandy inner shelf off Florida and Massachusetts

A simple parameterized model for wave-induced burial of mine-like cylinders as a function of grain-size, time-varying, wave orbital velocity and mine diameter was implemented and assessed against results from inert instrumented mines placed off the Indian Rocks Beach (IRB, FL), and off the Martha's Vineyard Coastal Observatory (MVCO, Edgartown, MA). The steady flow scour parameters provided by Whitehouse (1998) for self-settling cylinders worked well for predicting burial by depth below the ambient seabed for O (0.5 m) diameter mines in fine sand at both sites. By including or excluding scour pit infilling, a range of percent burial by surface area was predicted that was also consistent with observations. Rapid scour pit infilling was often seen at MVCO but never at IRB, suggesting that the environmental presence of fine sediment plays a key role in promoting infilling. Overprediction of mine scour in coarse sand was corrected by assuming a mine within a field of large ripples buries only until it generates no more turbulence than that produced by surrounding bedforms. The feasibility of using a regional wave model to predict mine burial in both hindcast and real-time forecast mode was tested using the National Oceanic and Atmospheric Administration (NOAA, Washington, DC) WaveWatch 3 (WW3) model. Hindcast waves were adequate for useful operational forcing of mine burial predictions, but five-day wave forecasts introduced large errors. This investigation was part of a larger effort to develop simple yet reliable predictions of mine burial suitable for addressing the operational needs of the U.S. Navy. ?? 2007 IEEE.

IEEE Journal of Oceanic Engineering↗
USGS2007

A comparison of near-bed acoustic backscatter and laser diffraction measurements of suspended sediments

As part of the U.S. Office of Naval Research (ONR, Arlington, VA) mine burial program, an experiment was conducted off the pier at Santa Cruz, CA, to measure the near-bed suspended sediment reference concentration under waves and currents. Two tripods were deployed to carry out the measurements; one consisting mainly of acoustical instrumentation and the other solely of optical instruments. The tripods were located within 15 m of one another on a sandy bed and measurements of the suspended sediment were made using acoustics and optics. Although the experiment was not primarily designed to conduct an intercomparison of acoustical and optical measurements, it was considered interesting to take advantage of the situation and to examine if these two techniques gave comparable results. In particular, measurements of particle size and concentration, obtained using a triple frequency acoustic backscatter system (ABS) have been compared with the commercially available laser miniature scattering and transmissometry instrument (MSCAT). It was found that the mean grain size estimated by the two methods was consistent; however, in contrast, the concentration time series showed differences, both in magnitude and form.

IEEE Journal of Oceanic Engineering↗
USGS2007

In situ time-series measurements of subseafloor sediment properties

The capabilities and diversity of subsurface sediment sensors lags significantly from what is available for the water column, thereby limiting progress in understanding time-dependent seabed exchange and high-frequency acoustics. To help redress this imbalance, a new instrument, the autonomous sediment profiler (ASP), is described herein. ASP consists of a four-electrode, Wenner-type resistivity probe and a thermistor that log data at 0.1-cm vertical intervals over a 58-cm vertical profile. To avoid resampling the same spot on the seafloor, the probes are moved horizontally within a 20 times 100-cm -2 area in one of three preselected patterns. Memory and power capacities permit sampling at hourly intervals for up to 3-mo duration. The system was tested in a laboratory tank and shown to be able to resolve high-frequency sediment consolidation, as well as changes in sediment roughness. In a field test off the southern coast of France, the system collected resistivity and temperature data at hourly intervals for 16 d. Coupled with environmental data collected on waves, currents, and suspended sediment, the ASP is shown to be useful for understanding temporal evolution of subsurface sediment porosity, although no large depositional or erosional events occurred during the deployment. Following a rapid decrease in bottom-water temperature, the evolution of the subsurface temperature field was consistent with the 1-D thermal diffusion equation coupled with advection in the upper 3-4 cm. Collectively, the laboratory and field tests yielded promising results on time-dependent seabed change.

IEEE Journal of Oceanic Engineering↗
USGS2019

Measurement of sounds emitted by certain high-resolution geophysical survey systems

Scientific questions regarding the impact of anthropomorphic noise in the marine environment have resulted in an increasing number of regulatory requirements and precautionary mitigation strategies to reduce the risks associated with high-resolution marine geophysical surveys performed in waters subjected to government jurisdiction. An example of regulatory frameworks includes the Marine Mammal Protection Act in the United States and the Marine Strategy Framework Directive 2008/56/EC in the European Union. Regulatory compliance often requires an assessment of the potential ecological risks before initiating a marine geophysical survey. However, the acoustic source data needed to estimate the risk associated with the operation of a given high-resolution survey system are frequently lacking. A comprehensive measurement program was performed to quantify the characteristics of sounds radiated by a variety of commercial marine geophysical survey systems, including boomers, sparkers, airguns, chirp sub-bottom profilers, sidescan sonars, and swath-bathymetric sonars [Crocker and Fratantonio, “Characteristics of high-frequency sounds emitted during high-resolution marine geophysical surveys,” Naval Undersea Warfare Center, Newport, RI, USA, NUWC-NPT Tech. Rep. 12, 203, 2016]. Calibrated acoustic source data, including source levels, source spectra, and beam patterns, were acquired for a total of 18 different marine geophysical survey systems. The data support modeling to estimate the potential ecological impacts resulting from the operation of certain high-resolution marine geophysical survey systems.

IEEE Journal of Oceanic Engineering↗
USGS2020

Maximum entropy derived statistics of sound speed structure in a fine-grained sediment inferred from sparse broadband acoustic measurements on the New England continental shelf

Marginal probability distributions for parameters representing an effective sound-speed structure of a fine-grained sediment are inferred from a data ensemble maximum entropy method that utilizes a sparse spatially distributed set of received pressure time series resulting from multiple explosive sources in a shallow-water ocean environment possessing significant spatial variability of the seabed. A remote sensing seabed acoustics experiment undertaken in March 2017 off the New England Shelf was designed so that multiple independent analyses could infer the statistical properties of the seabed. The current analysis incorporates the measured horizontal variability from interpretations of a subbottom profiling survey of the experimental area. An idealized range- and azimuth-dependent parameterization of the seabed is derived from identification of horizons within the seabed that define multiple sediment layers. A sparse set of explosive charges were deployed on circular tracks with radii of about 2, 4, and 6.5 km with an acoustic array at the center to correlate a set of random measurements to physical acoustic processes that characterize the seabed. The mean values of a surface sound speed ratio and a linear sound speed gradient for the fine-grained sediment layer derived from 12 data samples processed in the 25–275-Hz band provide an estimate of the effective sound-speed structure in a 130-km $^2$ area. The inferred sediment sound speed values are evaluated by predicting measured time series data not used in the statistical inference, and are also compared to historical measurements. Finally, the low-frequency maximum entropy estimate of the sediment sound speed along with physical measurements derived from piston core measurements are utilized to estimate the sediment grain bulk modulus. predictions made by the viscous grain shearing model.

Maine, Vermont, New Hampshire, Massachusetts, Rhod↗
USGS2020

In situ measurements of compressional wave speed during gravity coring operations in the New England mud patch

This paper presents measurements of sediment sound-speed profiles measured in situ using the acoustic coring system (ACS). The reported measurements were obtained from seven gravity cores collected in the New England Mud Patch. The ACS uses two sets of transducers mounted below the penetrating tip of a sediment corer to make in situ measurements of geoacoustic properties as the corer penetrates the seabed. The in situ sound-speed profiles are interpreted in the context of stratigraphic layering measured by a seismic survey, and the measured sound-speed profiles are consistent with the geophysical description. The in situ sound-speed profiles measured by the ACS were compared to conventional measurements of sound speed on the recovered cores using the multisensor core logger (MSCL). The MSCL data displayed both random and systematic errors that were attributed to disturbance from the coring process and/or the handling of the sediments after collection. Finally, using porosity and grain size distributions measured from discrete samples of the cored sediments, the in situ sound-speed measurements were compared to empirical regressions based on independent data sets.

Atlantic Ocean, New England Mud Patch↗
USGS2020

Geoacoustic inversion for a New England mud patch sediment using the silt-suspension theory of marine mud

This article provides an application of the silt-suspension theory to a Bayesian-inference inversion for the geo-acoustic parameters in marine mud. The theory, with consequences that have been developed recently, postulates a suspension of water and clay mineral card-houses that supports moderately dilute concentrations of silt particles. The approach is an example of a physically based model inversion, in which parameters representing physical mud-layer properties are obtained by inversion and used to produce estimates of geoacoustic properties, including their frequency dependence. The acoustic data are from a combustive source signal propagated along a track, located over several meters of fine-grained mud in the New England Mud Patch, to a single hydrophone on a receiver array during the 2017 Seabed Characterization Experiment. Data extracted from a nearby piston core inform the physical modeling, with selections of inversion parameters guided by both sensitivity analyses and bounds from archival and core measurements. Results show the feasibility of this inversion approach. The estimates of mud density and sound speed are close to values obtained independently. The frequency dependence of attenuation is estimated over the full low-frequency source band and has an approximate power exponent of 1.72.

IEEE Journal of Oceanic Engineering↗
USGS2022

Measurements of Geologic Characteristics and Geophysical Properties of Sediments From the New England Mud Patch

The characterization of physical, geological, and geophysical properties of sediments within the New England Mud Patch (NEMP) was undertaken to provide a physical basis for acoustic inversions associated with the SeaBed Characterization EXperiment 2017 (SBCEX17). Using a suite of 89 sediment cores (piston/trigger, gravity [acoustic], and vibracore), a comprehensive database of laboratory-based sediment analyses, geophysical core logs, and the results of seismic reflection profiling, we formulate a three-layer lithostratigraphic model of the area within and immediately adjacent to the SBCEX17 focus area, referred to as the seabed experiment area (SEA). The uppermost lithostratigraphic unit, Unit 1, is relatively homogenous clayey- to sandy silt, with consistent downcore textural, mineralogical, and physical property attributes. Unit 2 is a variable-thickness transitional layer between Unit 1 and Unit 3, whose properties reflect a decrease in proximal erosion and transition to a lower energy depositional environment. Unit 3 is clean quartz sand containing abundant shells and shell fragments that was regionally deposited during Holocene sea-level rise. 210 Pb and 14 C radiocarbon geochronologies spanning the past 13 000 years are used to facilitate intercore comparison across the SEA. Analytical results and laboratory methods used in the derivation of those results are described in detail, serving as a reference for ongoing and future investigation of the SEA and entire NEMP. Although the derived lithostratigraphic model of the SEA is in good agreement with past evaluations of the regional sedimentology, comparisons of the lithostratigraphic and seismostratigraphic models highlight several significant incompatibilities that remain to be satisfactorily explained.

IEEE Journal of Ocean Engineering↗
USGS2026

Single receiver target localization in mobile marine acoustic telemetry

Many marine ecological studies track animal movement and migration using acoustic telemetry, in which animals are implanted with acoustic transmitters broadcasting a unique ID code. Receivers detect and decode these transmissions and provide an estimate of the animal’s location. As transmissions can be detected at distances of hundreds of meters to even several kilometers, localization performed using binary detection information is very coarse. Fine-scale localization can be performed using time difference of arrival systems, but such systems are costlier and require a greater number of receivers. We present a Bayesian method for target localization using only binary detection information collected by a single receiver mounted on a mobile platform. The approach reduces error in the location estimate by considering the distance-dependent probability of detection (detection efficiency curve), which must first be characterized. Stationary receivers are used to infer failed detections. This localization method is then used to inform waypoint selection for the mobile platform, using the second nondominated sorting genetic algorithm considering the tradeoff between the travel distance of the platform and localization error. Simulation results examine the effects of detection efficiency curve characteristics, number of transmissions, and travel distance on the localization error. The proposed method is further supported by experimental results from field trials conducted with an autonomous surface vehicle in Lake Huron.

IEEE Journal of Oceanic Engineering↗