USGS ScienceSearch

USGS · 70204933

Maximum entropy derived statistics of sound speed structure in a fine-grained sediment inferred from sparse broadband acoustic measurements on the New England continental shelf

Abstract

Marginal probability distributions for parameters representing an effective sound-speed structure of a fine-grained sediment are inferred from a data ensemble maximum entropy method that utilizes a sparse spatially distributed set of received pressure time series resulting from multiple explosive sources in a shallow-water ocean environment possessing significant spatial variability of the seabed. A remote sensing seabed acoustics experiment undertaken in March 2017 off the New England Shelf was designed so that multiple independent analyses could infer the statistical properties of the seabed. The current analysis incorporates the measured horizontal variability from interpretations of a subbottom profiling survey of the experimental area. An idealized range- and azimuth-dependent parameterization of the seabed is derived from identification of horizons within the seabed that define multiple sediment layers. A sparse set of explosive charges were deployed on circular tracks with radii of about 2, 4, and 6.5 km with an acoustic array at the center to correlate a set of random measurements to physical acoustic processes that characterize the seabed. The mean values of a surface sound speed ratio and a linear sound speed gradient for the fine-grained sediment layer derived from 12 data samples processed in the 25–275-Hz band provide an estimate of the effective sound-speed structure in a 130-km $^2$ area. The inferred sediment sound speed values are evaluated by predicting measured time series data not used in the statistical inference, and are also compared to historical measurements. Finally, the low-frequency maximum entropy estimate of the sediment sound speed along with physical measurements derived from piston core measurements are utilized to estimate the sediment grain bulk modulus. predictions made by the viscous grain shearing model.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 40.985171° to 47.459686° latitude; -73.727775° to -66.950569° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

David P. Knobles, Preston S. Wilson, J.A. Goff, L. Wan, M.J. Buckingham, Jason Chaytor, Mohsen Badiey. 2020. Maximum entropy derived statistics of sound speed structure in a fine-grained sediment inferred from sparse broadband acoustic measurements on the New England continental shelf. https://doi.org/10.1109/joe.2019.2922717

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Single receiver target localization in mobile marine acoustic telemetry

Many marine ecological studies track animal movement and migration using acoustic telemetry, in which animals are implanted with acoustic transmitters broadcasting a unique ID code. Receivers detect and decode these transmissions and provide an estimate of the animal’s location. As transmissions can be detected at distances of hundreds of meters to even several kilometers, localization performed using binary detection information is very coarse. Fine-scale localization can be performed using time difference of arrival systems, but such systems are costlier and require a greater number of receivers. We present a Bayesian method for target localization using only binary detection information collected by a single receiver mounted on a mobile platform. The approach reduces error in the location estimate by considering the distance-dependent probability of detection (detection efficiency curve), which must first be characterized. Stationary receivers are used to infer failed detections. This localization method is then used to inform waypoint selection for the mobile platform, using the second nondominated sorting genetic algorithm considering the tradeoff between the travel distance of the platform and localization error. Simulation results examine the effects of detection efficiency curve characteristics, number of transmissions, and travel distance on the localization error. The proposed method is further supported by experimental results from field trials conducted with an autonomous surface vehicle in Lake Huron.

IEEE Journal of Oceanic Engineering

In situ measurements of compressional wave speed during gravity coring operations in the New England mud patch

This paper presents measurements of sediment sound-speed profiles measured in situ using the acoustic coring system (ACS). The reported measurements were obtained from seven gravity cores collected in the New England Mud Patch. The ACS uses two sets of transducers mounted below the penetrating tip of a sediment corer to make in situ measurements of geoacoustic properties as the corer penetrates the seabed. The in situ sound-speed profiles are interpreted in the context of stratigraphic layering measured by a seismic survey, and the measured sound-speed profiles are consistent with the geophysical description. The in situ sound-speed profiles measured by the ACS were compared to conventional measurements of sound speed on the recovered cores using the multisensor core logger (MSCL). The MSCL data displayed both random and systematic errors that were attributed to disturbance from the coring process and/or the handling of the sediments after collection. Finally, using porosity and grain size distributions measured from discrete samples of the cored sediments, the in situ sound-speed measurements were compared to empirical regressions based on independent data sets.

Atlantic Ocean, New England Mud Patch

Geoacoustic inversion for a New England mud patch sediment using the silt-suspension theory of marine mud

This article provides an application of the silt-suspension theory to a Bayesian-inference inversion for the geo-acoustic parameters in marine mud. The theory, with consequences that have been developed recently, postulates a suspension of water and clay mineral card-houses that supports moderately dilute concentrations of silt particles. The approach is an example of a physically based model inversion, in which parameters representing physical mud-layer properties are obtained by inversion and used to produce estimates of geoacoustic properties, including their frequency dependence. The acoustic data are from a combustive source signal propagated along a track, located over several meters of fine-grained mud in the New England Mud Patch, to a single hydrophone on a receiver array during the 2017 Seabed Characterization Experiment. Data extracted from a nearby piston core inform the physical modeling, with selections of inversion parameters guided by both sensitivity analyses and bounds from archival and core measurements. Results show the feasibility of this inversion approach. The estimates of mud density and sound speed are close to values obtained independently. The frequency dependence of attenuation is estimated over the full low-frequency source band and has an approximate power exponent of 1.72.

IEEE Journal of Oceanic Engineering