USGS Science⌕ Search

SEARCH · USGS Science

Results for “Bulletin Volcanologique”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 recordsLinked to original sources
USGS1969

Nuées Ardentes of the 1968 Eruption of Mayon Volcano, Philippines

Mayon Volcano, southeastern Luzon, began a series of explosive eruptions at 0900 April 21, 1968, and by May 15 more than 100 explosions had occurred, at least 6 people had been killed, and roughly 100 square km had been covered by more than 5 cm of airfall ash, blocky ash flows, and a lava flow. All material crupted was porphyritic augite-hypersthene andesite. Explosions from the summit crater (elevation 2460 m) ejected large quantities of ash and incandescent blocks to a height exceeding 600 m and produced ash-laden clouds which rose to heights of 3 to 10 km. Backfall of the coarser material fed nuées ardentes which repeatedly swept down ravines on all sides of the volcanic cone. The velocity of one nuée ardente ranged from 9 to 63 m per sec. The largest nuées descended to the southwest and reached as far as 7 km from the summit. An aa lava flow also descended 3 1/2 km down this flank. The nuées ardentes deposited pyroclastic flows that contained large breadcrust-surfaced blocks averaging about 30 cm across, but occasionally reaching 25 m in greatest dimension. These blocks were still very hot in their interiors several days later. Surrounding the pyroclastic flows is a seared zone as much as 2 km wide, but averaging a few hundred meters, in which vegetation is charred and splintered, but over which only a thin layer of airfall ash was deposited.

Mayon Volcano↗
USGS1970

Relationship between subsidence and volcanic load, Hawaii

A computer analysis of tide-gage records in the northeast Pacific indicates that the active volcanic islands of eastern Hawaii are subsiding at a rate considerably faster than the eustatic rise of sea level. The rate of absolute subsidence increases progressively toward the center of current activity on the Island of Hawaii. Honolulu, Oahu, appears to be stable; Kahului, Maui, is subsiding at 1.7 mm per year; and Hilo, Hawaii, is subsiding at 4.8 mm per year. This subsidence is apparently related to downbowing of the crust throughout a zone 400 km in diameter by the weight of volcanic material added to the crust by active volcanoes, principally Mauna Loa and Kilauea on the Island of Hawaii. The Hawaiian Arch encircles the subsiding zone and may be uplifted by material moving down and outward from the zone of subsidence. The annual volume of subsidence is about 270×10 6 m 3 , whereas the average annual volume of erupted basalt on the Island of Hawaii (based on historic records back to about 1820) is about 50×10 6 m 3 . The great excess of subsidence over volcanic addition cannot be reconciled by isostatic models, and is apparently the result of other processes operating in the volcano and its basement thet are poorly understood. Probably the more important of these processes are intrusions and submarine volcanism, both of which are providing additional unseen load on the volcanoes. Furthermore, the rate of eruption may be uplifted by material moving down and outward from the zone of subsidence may be overestimated due to localized downslope movement of the margins of the islands.

Hawaii↗
USGS1972

The complex filling of alae crater, Kilauea Volcano, Hawaii

Since February 1969 Alae Crater, a 165-m-deep pit crater on the east rift of Kilauea Volcano, has been completely filled with about 18 million m 3 of lava. The filling was episodic and complex. It involved 13 major periods of addition of lava to the crater, including spectacular lava falls as high as 100 m, and three major periods of draining of lava from the crater. Alae was nearly filled by August 3, 1969, largely drained during a violent ground-cracking event on August 4, 1969, and then filled to the low point on its rim on October 10, 1969. From August 1970 to May 1971, the crater acted as a reservoir for lava that entered through subsurface tubes leading from the vent fissure 150 m away. Another tube system drained the crater and carried lava as far as the sea, 11 km to the south. Much of the lava entered Alae by invading the lava lake beneath its crust and buoying the crust upward. This process, together with the overall complexity of the filling, results in a highly complicated lava lake that would doubtless be misinterpreted if found in the fossil record.

Hawaii↗
USGS1967

Changes in surface temperature at Taal Volcano, Philippines 1965-1966

Taal Volcano erupted in September 1965 ending a dormant period of 54 years. A quiescent interval of 9 months followed, terminated by new eruptions in July 1966 at the same site. Aerial surveys with a scanning infrared radiometer were made at three periods during the quiescent interval and twice following the July 1966 eruption. The survey technique yields a quasiphotographic image of the radiant temperature of the volcanic terrain. Results indicate that the principal changes in surface temperature stemmed from changes in convective heat transfer by hydrothermal fluids. New hot springs developed along the structurally-controlled northwest and southeast flanks of the 1965 explosion crater. The northwest spring grew in size prior to the 1966 eruption, persisted through that eruption and has since maintained its discharge. The 1965 cinder cone meanwhile showed a persistent rim of hydrothermal activity with some shift in position of maximum discharge. The July 1966 eruptions took place on the rim about midway between two positions of maximum discharge.

Bulletin Volcanologique↗
USGS1966

The September 28–30, 1965 eruption of Taal Volcano, Philippines

A moderately violent phreatomagmatic explosive eruption of Taal Volcano, Philippines, occurred from 28 to 30 September, 1965. The main phreatic explosions, which were preceded by ejection of basaltic spatter, opened a new crater 1.5 km long and 0.3 km wide on the southwest side of Volcano Island in Lake Taal. The eruption covered an area of about 60 square kilometers with a blanket of ash more than 25 cm thick and killed approximately 200 persons. The clouds that formed during the explosive eruption rose to heights of 15 to 20 km and deposited fine ash as far as 80 km west of the vent. At the base of the main explosion column, flat, turbulent clouds spread radially, with hurricane velocity, transporting ash, mud, lapilli and blocks. The horizontally moving, debris-laden clouds, sandblasted trees, coated the blast side of trees and houses with mud, and deposited coarse ejecta with dune-type bedding in a zone roughly 4 km in all directions from the explosion crater.

Bulletin Volcanologique↗
USGS1966

Volcanism in the western San Juan Mountains, Colorado

Three major cycles of volcanism during the Miocene and Pliocene formed a layered succession of calc-alkaline eruptive materials in the western San Juan Mountains nearly 1.5 miles thick and having a volume greater than 1,000 cubic miles. Each cycle was characterised by major eruptions followed by subsidence in the vent areas, and the resulting structure was a great volcanic plateau surrounding a complex of nested cauldrons. In the first cycle, cruption of several hundred cubic miles of tuff breccia and subordinate lavas was followed by subsidence that created the San Juan volcanic depression, about 15 miles wide and 30 miles long. During the second cycle, pyroclastic rocks and lava flows accumulated within this depression and on its borders, and the depression subsided further. During the third cycle, ash flows spead widely from centres within the depression, and their eruption resulted in formation and subsidence of the nearly circular comagmatic Silverton and Lake City cauldrons, each about 10 miles across, within the earlier depression. Cauldron subsidence in the second and third cycles was followed by resurgence and doming of the central blocks. Keystone grabens formed along the distended crests of the domed floors; graben faults formed in the third cycle were in part controlled by those formed in the second cycle. The distribution of post-cauldron radial and concentric fractures, dikes, and intrusive plutons, particularly around the Silverton cauldron, suggests that the underlying magma chamber must have been appreciably larger than the associated cauldrons.

Colorado↗
USGS1966

Crystallization of tholeiitic basalt in Alae Lava Lake, Hawaii

The eruption of Kilauea Volcano August 21–23, 1963, left 600,000 cubic meters of basaltic lava in a lava lake as much as 15 meters deep in Alae pit crater. Field studies of the lake began August 27 and include repeated core drilling, measurements of temperature in the crust and melt, and precise level surveys of the lake surface. The last interstitial melt in the lake solidified late in September 1964; by mid August 1965 the maximum temperature was 690°C at a depth of 11.5 meters. Pumice air-quenched from about 1140°C contains only 5 percent crystals — clinopyroxene, cuhedral olivine ( Fo 80 ), and a trace of plagioclase, ( An 70 ). Drill cores taken from the zone of crystallization in the lake show that olivine continued crystallizing to about 1070°C; below that it reacts with the melt, becoming corroded and mantled by pyroxene and plagioclase. Below 1070°C, pyroxene and plagioclase crystallized at a constant ratio. Ilmenite first appeared at about 1070°C and was joined by magnetite at about 1050°C; both increased rapidly in abundance to 1000°C. Apatite first appeared as minute needles in interstitial glass at 1000°C. Both the abundance and index of refraction of glass quenched from melt decreased nearly linearly with falling temperature. At 1070°C the quenched lava contains about 65 percent dark-brown glass with an index of 1.61; at 980°C it contains about 8 percent colorless glass with an index of 1.49. Below 980°C, the percentage of glass remained constant. Progressive crystallization forced exsolution of gases from the melt fraction; these formed vesicles and angular pores, causing expansion of the crystallizing lava and lifting the surface of the central part of the lake an average of 19.5 cm. The solidified basalt underwent pneumatolitic alteration, including deposition of cristobalite at 800°C, reddish alteration of olivine at 700°C, tarnishing of ilmenite at 550°C, deposition of anhydrite at 250°C, and deposition of native sulfur at 100°C. Ferric-ferrous ratios suggest that oxidation with maximum intensity between 550°C and 610°C moved downward in the crust as it cooled; this was followed by reduction at a temperature of about 100°C. The crystallized basalt is a homogeneous fine-grained rock containing on the average 48.3 percent by volume intergranular pyroxene (augite > pigeonite), 34.2 percent plagioclase laths (An 60 70 ), 7.9 percent interstitial glass, 6.9 percent opaques (ilmenite > magnetite), 2.7 percent olivine (Fo 70 80 ), and a trace of apatite. Chemical analyses of 18 samples, ranging from initially quenched pumice to lava cored more than a year after the eruption from the center and from near the base of the lake, show little variation from silica-saturated tholeiitic basalt containing 50.4 percent SiO 2 , 2.4 percent Na 2 O, and 0.54 percent K 2 O. Apparently there was no significant crystal settling and no appreciable vapor-phase transport of these components during the year of crystallization. However, seven samples of interstitial liquid that had been filter-pressed into gash fractures and drill holes from partly crystalline mush near the base of the crust show large differences from the bulk composition of the solidified crust—lower MgO, CaO, and Al 2 O 3 ; and higher total iron, TiO 2 , Na 2 O, K 2 O, P 2 O 5 , and F, and, in most samples, SiO 2 . The minor elements Ba, Ga, Li, Y, and Yb and possibly Cu tend to be enriched in the filter-pressed liquids, and Cr and possibly Ni tend to be depleted.

Hawaii↗
USGS1966

Gravity slide origin of rift zones of some Hawaiian volcanoes

The east-trending east rift zone of Kilauea volcano on the island of Hawaii is 50 km long and up to 3 km wide. It consists of three elements arranged roughly in three belts from north to south: 1) eruptive fissures, cracks, faults, and narrow grabens, 2) cinder cones (produced by eruptions more localised than the fissure eruptions), and 3) pit craters. Eruptive vents, either fissure or cone, do not occur south of pit craters; vents occur on the floor of some pit craters but are conlined to the north half. Most earthquakes near the rift zone are shallow; they are abundant south of the rift zone but rare north of it. Precise levelling over a 6-year period shows elevation changes of up to 1 metre. Profiles of elevation change across the rift zone are asymmetrically steep on the north side. Precise triangulation shows that points south of the rift have been moving southward at right angles to the rift zone at rates of as much as 10 cm per year. During the major earthquake of 1868, the south coast of the island subsided as much as 2 metres, and abundant evidence indicates other recent subsidence of the south coast. The above facts suggest that the rift zone dips south and that it bounds a large segment of the volcano which is sliding down the steep southern flank. Tensional cracks at the head of this slide tap the shallow central reservoir of the volcano at a depth of a few kilometres. The resulting dikes may feed eruptive fissures in the tensional zone at the head (northernmost part) of the slide, or they may pierce the hanging wall of the south-dipping rift zone through more confined conduits and feed the cinder cones. Likewise, shallow collapse into the rift zone on the north produces narrow grabens, whereas deeper collapse farther south (perhaps aided by magma stoping upward) produces circular pit craters. Submarine topography south of Kilauea caldera indicates a submarine landslide on the south slope of the volcano. The landslide tongue is more than 25 kilometres long and is bounded upslope by a concave escarpment. On land, the northern rim of this escarpment is formed by a series of faults down-dropped on the south, called the Hilina fault system. Dredge hauls from a 300-metre hill on the crest of the landslide tongue at a water depth of 800 metres consists of angular fragments of fresh, glassy, tholeiitic basalt. The high vesicularity of this basalt suggests that it was erupted at a water depth several hundred metres less than that at which it was collected. Presumably, landsliding has carried the lava downward into deeper water.

Bulletin Volcanologique↗
USGS1966

Deformation measurements on Kilauea volcano, Hawaii

Repeated electronic distance measurements across Kilauea Caldera with Tellurometers and Geodimeter show definite horizontal expansion related to the vertical uplift and outward tilting of the summit prior to an eruption, and contraction during and after a flank eruption. Measurements started in October 1964, along a 3098 meter line between Uwekahuna and Keanakakoi, indicate a relatively uniform lengthening of 12 centimeters during the interval October 22, 1964 to March 1, 1965. Rapid shortening of the line by 28 centimeters was measured 4 days after the beginning of a flank eruption which involved emission of approximately 29 million cubic meters of lava during the period March 5 to March 15, 1965. During the expansion, the standard deviation of 10 Tellurometer measurements from a least-squares srtaight line solution is ± 2.0 centimeters (6.5 ppm) whereas 9 Geodimeter measurements have a standard deviation of ± 1.1 (3.6 ppm) centimeters. Absolute distance readings between the two instruments differ by 4 centimeters (13 ppm), but relative changes in distance were the same on both instruments. Changes in distance across Kilauea Caldera can, therefore, be easily measured to accuracies of 4 to 7 parts per million with standard electronic distance measuring systems. On active volcanoes where ground surface deformation exceeds 10–100 parts per million with changes in subsurface magma pressure or volume, repeated horizontal distance measurements can be a most useful technique.

Hawaii↗
USGS1966

The 1963–65 eruption of Irazú volcano, Costa Rica (the period of March 1963 to October 1964)

The 1963–65 eruption of Irazú, like all others of this volcano during the historic period, produced only ash and other fragmental ejecta without lava. The initial outbreak on March 13, 1963 started with a series of great explosions that hurled out much ash, blocks, and bombs, but the activity soon settled down to alternating periods of explosive cruptions and quiet emission of steam. Ash was deposited mostly along a zone that extended westward from the summit to and beyond the city of San Jose, 24 km away. The prolonged ashfall severely damaged dairy, vegetable, and coffee farms, and for a while made daily life in the affected cities extremely difficult. Accelerated runoff of rainwater from the ash-covered slopes of the volcano caused destructive floods, mudflows, and landslides. The climax of the cruption probably occurred during December 1963 and January 1964, when ash and incandescent scoria were erupted voluminously and the magma rose to within 100 meters of the lip of the vent. Precise levelling along the highway to the summit in May 1964 by the Geographic Institute revealed the upper part of the volcano upheaved as much as 11 cm above levels determined in 1949. A repetition of the levelling in September 1964 showed a subsidence to approximately the 1949 configuration, indicating a distinct reduction of pressure in the magma chamber. Substantial amounts of pulverized wallrock were present in the ash along with fragments of scoria and pumice. Progressive caving of the vent walls, which enlarged the diameter of the vent from 200 meters to 525 meters, kept dropping wallrock down onto the exploding magma, and at times stopped the eruption for a day or two by plugging the vent. The scoriaceous and pumiceous bombs were porphyritic two-pyroxene olivine basaltic andesite, and their composition remained remarkably constant throughout the eruption. The ash section was about 2 meters thick, 800 meters downwind from the vent in June 1964. In the section, deposits of the rainy season could be distinguished by their well developed stratification from those of the dry season. A zone containing three persistent pumice horizons represents the climactic period of December 1963 to January 1964. The cloudburst of December 10, 1963 is recorded by a highly rilled surface, and the strong winds of the dry season of 1964 are indicated by a rippled lag deposit.

Bulletin Volcanologique↗
USGS1964

Deep geothermal brine near Salton Sea, California

A well drilled for geothermal power near Salton Sea in Imperial Valley, Calif., is 5,232 feet deep; it is the deepest well in the world (1962) in a high-temperature hot spring area. In the lower half of the hole temperatures are too high to measure with available equipment, but are at loast 270°C, and may be as much as 370°C. For comparison, maximum temperature heretofore reported at depth (1962) for hot spring areas is 295°C. The well taps a very saline brine of Na-Ca-K-Cl type (about 185,000 ppm Cl) with exceptionally high potassium, and with the highest content of minor alkali elements known for natural waters; Fe, Mn, Zn, Pb, Cu, Ag, and some other metals are also exceptionally high. This brine may be connate, but present evidence favors a source in the magma chamber at depth that supplied late Quaternary rhyolite domes of the area. If the latter is correct, the brine is an undiluted magmatic water that is residual from the separation of a more volatile phase high in CO 2 , H 2 S, and with some alkali halides. Elsewhere, the hypothesized volatile phase may account for near-surface hot spring activity of most thermal areas of volcanic association. The residual brine of high salinity may ordinarily remain relatively deep in the volcanic systems because of high specific gravity and low content of volatiles, seldom appearing at the surface except in a greatly diluted form. The hot springs of Arima, Japan, may be a rare example of this type of magmatic water discharging at the surface in moderate concentration (Cl as much as 42,000 ppm). Independent evidence from fluid inclusions in minerals of high-temperature base-metal deposits also favors the existence of magmatic water high in Na, Ca, and Cl, and low in CO 2 and other volatile components. During a three-month production test several tons of material precipitated in the horizontal discharge pipe from the well. Amorphous silica with iron and manganese, and bornite are the dominant recognized components. This material contains the astonishingly high contents of about 20 percent copper, 2 percent silver, and notable sulfur, arsenic, bismuth, lead, antimony, and some other minor elements. Total quantities of all elements in the original whole brine are not yet known, but calculated amounts corresponding to 1 to 3 ppm of copper and 0.1 to 0.3 ppm of silver were precipitated from the brine to form the pipe deposits. The brine, therefore, may be man’s first sample of an « active » ore solution. Equally fascinating to many geologists is the possibility that in the lower part of the hole temperatures are so high and pressures are sufficient for young sedimentary rocks to be undergoing transformation into rocks with mineral assemblages of the greenschist facies of metamorphism. Drill cores from 4,400 to 5,000 feet in depth contain chlorite, albite, K-feldspar, epidote, mica, and quartz, with some indication of increase in metamorphic grade downward. Regional geological and geophysical studies favor a depth of about 20,000 feet to pre-Tertiary basement rocks in the general area. A shallow basement or local upfaulting of old metamorphic rocks are not likely possibilities for the thermal area.

California↗
USGS1983

Seismicity at Fuego, Pacaya, Izalco, and San Cristobal Volcanoes, Central America, 1973-1974

Seismic data collected at four volcanoes in Central America during 1973 and 1974 indicate three sources of seismicity: regional earthquakes with hypocentral distances greater than 80 km, earthquakes within 40 km of each volcano, and seismic activity originating at the volcanoes due to eruptive processes. Regional earthquakes generated by the underthrusting and subduction of the Cocos Plate beneath the Caribbean Plate are the most prominent seismic feature in Central America. Earthquakes in the vicinity of the volcanoes occur on faults that appear to be related to volcano formation. Faulting near Fuego and Pacaya volcanoes in Guatemala is more complex due to motion on a major E-W striking transform plate boundary 40 km north of the volcanoes. Volcanic activity produces different kinds of seismic signatures. Shallow tectonic or A-type events originate on nearby faults and occur both singly and in swarms. There are typically from 0 to 6 A-type events per day with b value of about 1.3. At very shallow depths beneath Pacaya, Izalco, and San Cristobal large numbers of low-frequency or B-type events are recorded with predominant frequencies between 2.5 and 4.5 Hz and with b values of 1.7 to 2.9. The relative number of B-type events appears to be related to the eruptive states of the volcanoes; the more active volcanoes have higher levels of seismicity. At Fuego Volcano, however, low-frequency events have unusually long codas and appear to be similar to tremor. High-amplitude volcanic tremor is recorded at Fuego, Pacaya, and San Cristobal during eruptive periods. Large explosion earthquakes at Fuego are well recorded at five stations and yield information on near-surface seismic wave velocities (??=3.0??0.2 km/sec.). ?? 1983 Intern. Association of Volcanology and Chemistry of the Earth's Interior.

Bulletin Volcanologique↗
USGS1980

Oxygen isotopic determinations of sequentially erupted plagioclases in the 1974 magma of Fuego Volcano, Guatemala

Plagioclases in the 1974 high-Al basalt from Fuego Volcano have ??O18 values of +6.0 to +8.5 per mil. Meteoric water cannot have played a significant role in Fuego's magma. Large, weakly zone clear phenocrysts had ??O18 values in the accepted mantle range, while patchyzoned and oscillatory-zoned plagioclases inferred to have formed later and shallower levels have slightly heavier oxygen isotopic ratios. ?? 1980 Intern. Association of Volcanology and Chemistry of the Earth's Interior.

Bulletin Volcanologique↗