USGS Science⌕ Search

SEARCH · USGS Science

Results for “Tectonics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,459 records · Page 81Linked to original sources

Mechanical deformation model of the western United States instantaneous strain-rate field

We present a relationship between the long-term fault slip rates and instantaneous velocities as measured by Global Positioning System (GPS) or other geodetic measurements over a short time span. The main elements are the secularly increasing forces imposed by the bounding Pacific and Juan de Fuca (JdF) plates on the North American plate, viscoelastic relaxation following selected large earthquakes occurring on faults that are locked during their respective interseismic periods, and steady slip along creeping portions of faults in the context of a thin-plate system. In detail, the physical model allows separate treatments of faults with known geometry and slip history, faults with incomplete characterization (i.e. fault geometry but not necessarily slip history is available), creeping faults, and dislocation sources distributed between the faults. We model the western United States strain-rate field, derived from 746 GPS velocity vectors, in order to test the importance of the relaxation from historic events and characterize the tectonic forces imposed by the bounding Pacific and JdF plates. Relaxation following major earthquakes (M ??? 8.0) strongly shapes the present strain-rate field over most of the plate boundary zone. Equally important are lateral shear transmitted across the Pacific-North America plate boundary along ???1000 km of the continental shelf, downdip forces distributed along the Cascadia subduction interface, and distributed slip in the lower lithosphere. Post-earthquake relaxation and tectonic forcing, combined with distributed deep slip, constructively interfere near the western margin of the plate boundary zone, producing locally large strain accumulation along the San Andreas fault (SAF) system. However, they destructively interfere further into the plate interior, resulting in smaller and more variable strain accumulation patterns in the eastern part of the plate boundary zone. Much of the right-lateral strain accumulation along the SAF system is systematically underpredicted by models which account only for relaxation from known large earthquakes. This strongly suggests that in addition to viscoelastic-cycle effects, steady deep slip in the lower lithosphere is needed to explain the observed strain-rate field. ?? 2006 The Authors Journal compilation ?? 2006 RAS.

Geophysical Journal International↗

Permeability of the continental crust: Dynamic variations inferred from seismicity and metamorphism

The variation of permeability with depth can be probed indirectly by various means, including hydrologic models that use geothermal data as constraints and the progress of metamorphic reactions driven by fluid flow. Geothermal and metamorphic data combine to indicate that mean permeability ( k ) of tectonically active continental crust decreases with depth ( z ) according to log k ≈ −14–3.2 log z , where k is in m 2 and z in km. Other independently derived, crustal‐scale k – z relations are generally similar to this power‐law curve. Yet there is also substantial evidence for local‐to‐regional‐scale, transient, permeability‐generation events that entail permeabilities much higher than these mean k – z relations would suggest. Compilation of such data yields a fit to these elevated, transient values of log k ≈ −11.5–3.2 log z , suggesting a functional form similar to that of tectonically active crust, but shifted to higher permeability at a given depth. In addition, it seems possible that, in the absence of active prograde metamorphism, permeability in the deeper crust will decay toward values below the mean k – z curves. Several lines of evidence suggest geologically rapid (years to 10 3 years) decay of high‐permeability transients toward background values. Crustal‐scale k – z curves may reflect a dynamic competition between permeability creation by processes such as fluid sourcing and rock failure, and permeability destruction by processes such as compaction, hydrothermal alteration, and retrograde metamorphism.

Geofluids↗

Metamorphic and structural history of continental crust at a Mesozoic collisional margin, the Ruby terrane, central Alaska

The Ruby terrane is an elongate fragment of continental crustal rocks that is structurally overlain by thrust slices of oceanic crust. Our results from the Kokrines Hills, in the south‐central part of the Ruby terrane, demonstrate that the low‐angle schistose fabric formed under high‐ P /low‐ T conditions, at peak conditions of 10.8‐13.2 kbar and 425‐550° C, consistent with the rare occurrence of glaucophane. White mica 40 Ar/ 39 Ar cooling ages from these blueschists indicate that the metamorphism occurred prior to 144 ± 1 Ma. The blueschist facies assemblages are partially replaced by greenschist facies assemblages in the eastern Kokrines Hills. In contrast, in the central and western Kokrines Hills, upper amphibolite to lower granulite facies metamorphism associated with extensive late Early Cretaceous plutonism has completely overprinted any evidence of an earlier high‐ P/T metamorphic history. Deformation accompanying the plutonism produced recumbent isoclinal folds in the plutonic rocks and pelitic gneisses of the wallrock; decompression reactions in the pelitic gneisses suggest that the deformation occurred during exhumation. Thermochronological data bracket the time of intrusion and cooling below 500° C between 118 ± 3 and 109 ± 1 Ma. Our data from the schists of the Ruby terrane support the general assumption of many authors that the Ruby terrane was subducted beneath an oceanic island arc. This tectonic history is similar to that described for other large continental crustal blocks in northern and central Alaska, in the Brooks Range, Seward Peninsula and Yukon‐Tanana Upland. The current orientation of the Ruby terrane at an oblique angle to these other crustal blocks and to the Cordilleran trend is due to post‐collisional tectonic processes that have greatly modified the original continental margin.

Alaska↗

Implications of ground water chemistry and flow patterns for earthquake studies

Ground water can facilitate earthquake development and respond physically and chemically to tectonism. Thus, an understanding of ground water circulation in seismically active regions is important for earthquake prediction. To investigate the roles of ground water in the development and prediction of earthquakes, geological and hydrogeological monitoring was conducted in a seismogenic area in the Yanhuai Basin, China. This study used isotopic and hydrogeochemical methods to characterize ground water samples from six hot springs and two cold springs. The hydrochemical data and associated geological and geophysical data were used to identify possible relations between ground water circulation and seismically active structural features. The data for ??18O, ??D, tritium, and 14C indicate ground water from hot springs is of meteoric origin with subsurface residence times of 50 to 30,320 years. The reservoir temperature and circulation depths of the hot ground water are 57??C to 160??C and 1600 to 5000 m, respectively, as estimated by quartz and chalcedony geothermometers and the geothermal gradient. Various possible origins of noble gases dissolved in the ground water also were evaluated, indicating mantle and deep crust sources consistent with tectonically active segments. A hard intercalated stratum, where small to moderate earthquakes frequently originate, is present between a deep (10 to 20 km), high-electrical conductivity layer and the zone of active ground water circulation. The ground water anomalies are closely related to the structural peculiarity of each monitoring point. These results could have implications for ground water and seismic studies in other seismogenic areas. Copyright ?? 2005 National Ground Water Association.

Yanhuai Basin↗

Finding the hidden orogeny – The Proterozoic polymetamorphic history of northern New Mexico

Pressure–temperature–time-deformation histories provide key constraints on orogenic processes but can be affected by later overprinting. This is exemplified in the Proterozoic orogenic belts of southwestern Laurentia where competing tectonic models involve either a single progressive Mesoproterozoic event, the Picuris orogeny, or a polyorogenic history that also includes the ~1.65 Ga Mazatzal orogeny. We address this controversy with structural analysis and petrochronology in the type locality of the Picuris orogeny. Xenotime and monazite domains associated with the greenschist-facies axial planar fabric of early F 1 folds yield 1644 ± 11 Ma (xenotime) and 1641 ± 15 Ma (monazite) ages and 450°C–482°C temperatures recording metamorphism and shortening associated with the Mazatzal orogeny. This Palaeoproterozoic greenschist-facies assemblage was overprinted by higher grade, protracted (1470–1350 Ma) tectonism that included the Picuris orogeny. Our results document the complex polyphase crustal assembly of Laurentia and highlight how petrochronology can effectively see through higher grade overprints to identify a more complete orogenic evolution.

New Mexico↗

Mantle fault zone beneath Kilauea Volcano, Hawaii

Relocations and focal mechanism analyses of deep earthquakes (???13 kilometers) at Kilauea volcano demonstrate that seismicity is focused on an active fault zone at 30-kilometer depth, with seaward slip on a low-angle plane, and other smaller, distinct fault zones. The earthquakes we have analyzed predominantly reflect tectonic faulting in the brittle lithosphere rather than magma movement associated with volcanic activity. The tectonic earthquakes may be induced on preexisting faults by stresses of magmatic origin, although background stresses from volcano loading and lithospheric flexure may also contribute.

Science↗

Venus: Preliminary topographic and surface imaging results from the Pioneer Orbiter

Three large Venus surface features, identified previously in images obtained from Earth-based radar observations, are shown by the Pioneer Venus radar mapper to be elevated 5 to 10 kilometers above the surrounding terrain. Two of these features, one bright and the other dark, lie adjacent to each other astride the 65°N parallel between longitudes 310°E and 10°E. The combined region forms a huge tectonically uplifted plateau, surmounted by radar-bright ridges that may have either a volcanic or tectonic origin. The third feature, located at 30°N, 283°E, is radar-bright and may consist of volcanic material extruded along a fault zone. A first radar-scattering image, compiled from data obtained by the mapper in its imaging mode, shows a region north of the equator; several circular depressions seen in this area may result from meteoritic impact.

Science↗

Low-frequency earthquakes track the motion of a captured slab fragment

Accurate tectonic models are essential for assessing seismic hazard and fault interactions. However, the plate configuration at the complex Mendocino triple junction, where the San Andreas Fault and the Cascadia subduction zone meet, remains uncertain. We analyzed fault slip associated with a recently identified zone of tectonic tremor and low-frequency earthquakes (LFEs) near the southern edge of the subducting Gorda slab. Based on tidal sensitivity and P-wave first motions, we show that the LFEs are generated by dipping, strike-slip motion. This suggests that a former Farallon slab fragment, now captured by the Pacific plate, is translating northward beneath westernmost North America. This geometry effectively extends the slab interface fault, challenging prevailing interpretations of slab window formation and creating a potential unaccounted earthquake hazard in this region.

Science↗

Contrasting Proterozoic basement complexes near the truncated margin of Laurentia, northwestern Sonora–Arizona international border region

We utilize new geological mapping, conventional isotope dilution–thermal ionization mass spectrometry (ID-TIMS) and sensitive high-resolution ion microprobe (SHRIMP) U-Pb zircon analyses, and whole-rock radiogenic isotope characteristics to distinguish two contrasting Proterozoic basement complexes in the international border region southeast of Yuma, Arizona. Strategically located near the truncated southwest margin of Laurentia, these Proterozoic exposures are separated by a northwest-striking Late Cretaceous batholith. Although both complexes contain strongly deformed Paleoproterozoic granitoids (augen gneisses) intruded into fine-grained host rocks, our work demonstrates marked differences in age, host rock composition, and structure between the two areas. The Western Complex reveals a >5-km-thick tilted section of finely banded felsic, intermediate, and mafic orthogneiss interspersed with tabular intrusive bodies of medium-grained leucocratic biotite granite (1696 ± 11 Ma; deepest level), medium-grained hornblende-biotite granodiorite (1722 ± 12 Ma), and coarse-grained porphyritic biotite granite (1725 ± 19 Ma; shallowest level). Penetrative ductile deformation has converted the granites to augen gneisses and caused isoclinal folding and transposition of primary contacts. Exposed in a belt of northwest-trending folds, these rocks preserve southwest-vergent shear fabric annealed during amphibolite facies metamorphism, when crystalloblastic textures developed. Deformation and regional metamorphism occurred before emplacement of 1.1 Ga(?) mafic dikes. Throughout the Eastern Complex, meta-arkose, quartzite, biotite schist, and possible felsic metavolcanic rocks comprise the country rocks of strongly foliated medium- and coarse-grained biotite granite augen gneisses that yield mean 207 Pb/ 206 Pb ages of 1646 ± 10 Ma, 1642 ± 19 Ma, and 1639 ± 15 Ma. Detrital zircons from four samples of host sandstone are isotopically disturbed; nevertheless, the data indicate a restricted provenance (ca. 1665 Ma to 1650 Ma), with two older grains (1697 and 1681 Ma). The pervasively recrystallized Paleoproterozoic map units strike parallel to foliation and are repeated in south-trending folds that are locally refolded about easterly hinges. Southeasterly lineation developed in augen gneiss and host strata becomes penetrative in local domains of L-tectonite. Regional metamorphism associated with this tectonism persisted until ca. 1590 Ma, as recorded by metamorphic growths within some zircon grains. Mesoproterozoic intrusions that crosscut the Paleoproterozoic metasediments and augen gneisses include coarsely porphyritic biotite granite (1432 ± 6 Ma) and diabase dikes (1.1 Ga?). Emplacement of the granite was accompanied by secondary high-U overgrowths, dated at 1433 ± 8 Ma, on some of the Paleoproterozoic detrital zircons, and apparently was also responsible for resetting the whole-rock Pb isotopic systematics (1441 ± 39 Ma) within these Eastern Complex augen gneisses. Younger plutons emplaced into both Proterozoic basement complexes include medium-grained quartz diorite (73.4 ± 3.3 Ma and 72.8 ± 1.7 Ma), Late Cretaceous hornblende-biotite granodiorite, and Paleogene leucocratic biotite granite. Neogene sedimentary and volcanic strata overlie basement along unconformities that are tilted to the northeast, southeast, or southwest. A brittle normal fault, dipping gently northeast, juxtaposes Tertiary andesite with Paleoproterozoic metasandstone. These relationships suggest that the area shares a common history of mid-Tertiary extension with southwestern Arizona. Later influence of the southern San Andreas fault system is implied by multiple dextral offsets of pre-Tertiary units across northwest-trending valleys. Our structural, geochronologic, and isotopic data provide new information to constrain pre–750 Ma Rodinia reconstructions involving southwestern Laurentia. Whole-rock U-Th-Pb and Rb-Sr isotopic systematics in both Paleoproterozoic gneiss complexes are disturbed, however, well-behaved Sm-Nd analyses preserve depleted initial ε Nd values (+2 to +4) that are distinct from the Mojave crustal province, but overlapping with the Yavapai and Mazatzal Provinces of Arizona. The Eastern Complex has the appropriate age and Nd isotopic signature to be part of the Mazatzal Province, but records major tectonism and metamorphism at ca. 1.6 Ga that postdates the Mazatzal orogeny. Deformed granitoids of the Western Complex have “Yavapai-type” ages and ε Nd but display structures discordant to the southwesterly Yavapai trend in central Arizona. The Western Complex lies along-strike with similar-age rocks (1.77 Ga to 1.69 Ga) of the “Caborca block” that have only been studied in detail near Quitovac and south of Caborca. Collectively, these rocks form a northwest-trending strip of basement situated at the truncated edge of Laurentia. The present-day basement geography may reflect an original oroclinal bend in the Yavapai orogenic belt. Alternatively, the western Proterozoic belt of Sonora may represent displaced fragments of basement juxtaposed against the Yavapai-Mazatzal Provinces along a younger sinistral transform fault (e.g., the Late Jurassic Mojave-Sonora megashear or the Permian Coahuila transform). Crustal blocks with these specific petrologic, geochronologic, and isotopic characteristics can be found in south-central and northeastern portions of the Australian Proterozoic basement, further supporting a connection between the two continents prior to breakup of the Rodinian supercontinent.

Arizona, California, Nevada, Sonora↗

Middle Jurassic Topawa group, Baboquivari Mountains, south-central Arizona: Volcanic and sedimentary record of deep basins within the Jurassic magmatic arc

Among supracrustal sequences of the Jurassic magmatic arc of the southwestern Cordillera, the Middle Jurassic Topawa Group, Baboquivari Mountains, south-central Arizona, is remarkable for its lithologic diversity and substantial stratigraphic thickness, ???8 km. The Topawa Group comprises four units (in order of decreasing age): (1) Ali Molina Formation-largely pyroclastic rhyolite with interlayered eolian and fluvial arenite, and overlying conglomerate and sandstone; (2) Pitoikam Formation-conglomerate, sedimentary breccia, and sandstone overlain by interbedded silt- stone and sandstone; (3) Mulberry Wash Formation-rhyolite lava flows, flow breccias, and mass-flow breccias, with intercalated intraformational conglomerate, sedimentary breccia, and sandstone, plus sparse within-plate alkali basalt and comendite in the upper part; and (4) Tinaja Spring Porphyry-intrusive rhyolite. The Mulberry Wash alkali basalt and comendite are genetically unrelated to the dominant calcalkaline rhyolite. U-Pb isotopic analyses of zircon from volcanic and intrusive rocks indicate the Topawa Group, despite its considerable thickness, represents only several million years of Middle Jurassic time, between approximately 170 and 165 Ma. Sedimentary rocks of the Topawa Group record mixing of detritus from a minimum of three sources: a dominant local source of porphyritic silicic volcanic and subvolcanic rocks, identical or similar to those of the Topawa Group itself; Meso- proterozoic or Cambrian conglomerates in central or southeast Arizona, which contributed well-rounded, highly durable, polycyclic quartzite pebbles; and eolian sand fields, related to Middle Jurassic ergs that lay to the north of the magmatic arc and are now preserved on the Colorado Plateau. As the Topawa Group evidently represents only a relatively short interval of time, it does not record long-term evolution of the Jurassic magmatic arc, but rather represents a Middle Jurassic "stratigraphic snapshot" of the arc. This particular view of the arc has been preserved primarily because the Topawa Group accumulated in deep intra-arc basins. These nonmarine basins were fundamentally tectonic and extensional, rather than volcano-tectonic, in origin. Evidence from the Topawa Group supports two previous paleogeographic inferences: the Middle Jurassic magmatic arc in southern Arizona was relatively low standing, and externally derived sediment was introduced into the arc from the continent (northeast) side, without appreciable travel along the arc. We speculate that because the Topawa Group intra-arc basins were deep and rapidly subsiding, they became the locus of a major (though probably intermittent) fluvial system, which flowed into the low-standing magmatic arc from its northeast flank. ?? 2005 Geological Society of America.

Special Paper of the Geological Society of America↗

Terrain diagrams of the Philippine Islands

This paper presents four terrain diagrams, on a scale of 1:1,000,000, which cover all the Philippine Islands. The diagrams were prepared during World War II by the Military Geology Unit of the U. S. Geological Survey for the Chief of Engineers, U. S. Army. Terrain features shown on the diagrams owe their individuality to the nature of the rock formations and the tectonics. Mountain areas are made up of pre-Tertiary basement rocks, and of Tertiary and Quaternary volcanics; Tertiary and Quaternary sediments from the lowland areas. The mountain areas of basement rocks are geanticlines or horsts, and the lowland areas of Tertiary sedimentary rocks are downwarps. A striking tectonic feature, which has strongly influenced the terrain, is the Philippine fault zone, a belt of dislocation which extends southeast from Luzon to Mindanao.

Palawan↗

The age of the Puerto Rico Trench

The Puerto Rico Trench is parallel to and north of Puerto Rico and the Virgin Islands and reaches depths of more than 8000 meters. Puerto Rico, the closest land area, has a central longitudinal core of Cretaceous and early Tertiary volcanic rocks, some serpentinite of undetermined age, and numerous small intrusions. These rocks were folded into an anticlinorium and intensely faulted into hundreds of fault blocks in an orogeny that lasted from Late Cretaceous until middle Eocene time. Most fold axes and the major fault zones trend approximately west-northwest at an angle of about 15° to the general trend of the island and to the Puerto Rico Trench. Near the north coast, late Oligocene rocks rest on a truncated surface of Cretaceous and early Tertiary volcanic rocks. The Oligocene and overlying Miocene sedimentary rocks strike approximately east, parallel to the Puerto Rico Trench. Apparently the trench is not related to the tectonic movements that folded and faulted the Cretaceous and early Tertiary rocks, but it is closely related tectonically to the Oligocene and Miocene rocks. The trench probably first appeared in Oligocene or possibly late Eocene time and may have reached its maximum depth in late Miocene or Pliocene time.

Puerto Rico↗

Peru-Chile Trench sediments and sea-floor spreading

The hypotheses of sea-floor spreading and plate tectonics require the removal of sediment from oceanic trenches either by crustal underthrusting or by folding against the base of a continental or insular margin. Accordingly, over a period of time the volume of sediment removed by way of spreading must be equal to the difference between the observable volume of undeformed terrigenous deposits in a trench and the volume contributed to it by continental erosion. To assess possible sediment loss from the central Chilean segment (23°–44° S.) of the Peru-Chile Trench, we have compared the volume of terrigenous deposits overlying the land, the continental margin, and filling the trench with that expected from continental denudation. Our data indicate that an episode of sediment removal occurred at the base of the margin and adjacent deep-sea floor in Late Cretaceous and perhaps earlymost Tertiary time and may imply spreading. Nearly 100 × 10 3 km 3 of deposits of Tertiary age, chiefly Eocene to Pliocene, have accumulated on the margin, and perhaps an additional 5 × 10 3 km 3 in the trench. This amount of offshore sediment could be supplied by fairly low rates (3 cm/10 3 yrs) of Tertiary erosion. However, many uncertainties in our denudation-sedimentation budget make it impossible to determine whether or not sediment reaching the base of the margin was removed tectonically in Tertiary time. Between 27° and 44° S., the trench contains nearly 70 × 10 s km 3 of turbidite deposits that we believe accumulated during late Cenozoic periods of glacially lowered sea level. The volume of turbidites in the trench is virtually equal to that expected from continental erosion, which is estimated to have probably been no greater than 5 cm/10 3 yr for the arid region between 27° and 31°, and 50 cm/10 3 yr for the humid and partially glaciated region from 36° to 42°. During this time of rapid erosion and trench filling, magnetic data indicate that convergence of lithospheric plates was taking place below the trench at a rate between 5 and 10 cm/yr. If turbidite deposits were swept from the trench at these rates, then continental denudation must have been exceedingly rapid: 20–40 cm/10 3 yr for the arid zone, and 110–165 cm/10 3 yr for the partially glaciated region. If more conventional estimates of erosion are valid, then either (1) late Cenozoic underthrusting has not taken place (or at a rate much slower than that implied by geophysical data), or (2) underthrusting at the prescribed rates has not involved the removal of a significant volume of sediment from the trench.

Antofagasta↗

The Uralides and the motion of the Russian and Siberian Platforms

The Uralides—the late Precambrian and Paleozoic orogenic terrane between the Russian and Siberian Platforms—in part are exposed in the Ural Mountains, in the central Soviet Arctic, along the west edge of the Siberian Platform, and in southern Siberia and Kazakhstan, and in part are buried beneath the fill of the West Siberian Lowlands and other basins. Paleomagnetic orientations suggest that the Russian and Siberian Platforms were far apart during the early Paleozoic, converged during the middle Paleozoic, and collided in the Permian or Triassic. The geology of the Uralides accords with the concept that the two subcontinents approached and collided as the intervening oceanic plate slid beneath them along subduction (Benioff) zones. The medial eugeosyncline of the Uralides consists largely of what may be oceanic material scraped off against the edges of the opposed subcontinents. Basalt-and-spilite belts may represent ocean-floor abyssal tholeiite, and the manganiferous cherts and other sediments upon them may be pelagic oozes. Andesite belts may have formed as island arcs within the ocean, swept subsequently against the continents. Fossil subduction zones are recorded by great faults soled by, or containing tectonic injections of, mafic and ultramafic rocks from the lower oceanic crust and upper mantle, and containing high-pressure metamorphic rocks. Granitic and silicic-volcanic rocks may have formed above the subduction zones in the accreted parts of the continental plates. Both these continental-margin magmatic rocks and the island-arc complexes display ratios of potassium to silicon that vary across strike and so indicate the directions of dip of the subduction zones. From the distribution of such indicators of various ages, a history of the continental margins can be deduced. An active subduction zone dipped beneath the Siberian Platform during at least parts of late Precambrian and early, middle, and late Paleozoic time. The late Precambrian and Cambrian history of the Russian side is unclear, but in the Ordovician and Silurian the Russian continental margin was stable, while somewhere offshore an island arc was present whose trench was on the Russian side; the last of the intervening oceanic plate vanished down the subduction zone in about the Early Devonian, and the island arc became part of the continental margin. During the remainder of the Devonian and during the Carboniferous and Early Permian, a subduction zone was present along the margin of the enlarged Russian continent and dipped beneath it. Each subcontinent grew oceanward as oceanic material was accreted against it, and the subduction zones stepped oceanward correspondingly. The continental magmatic zones migrated oceanward behind the accreting edges of the continental plates, so the tectonic and magmatic progression with time at any one place is analogous to the variations present across the entire orogenic belt at any one time. Severe right-lateral deformation of the Uralides, the Russian side having moved northward relative to the Siberian side during Mesozoic and early Cenozoic time, is inferred from structural and magnetic-anomaly patterns. The deformation was accomplished by oroclinal folding, strike-slip faulting, and tensional thinning of the crust. The Uralides may have been continuous in early Mesozoic time with the Ellesmerides of North Greenland and the Canadian Arctic islands. The Cenozoic (and late Mesozoic?) opening of the Arctic Ocean was accomplished by spreading of the Eurasia Basin, and by opening of the Canada Basin behind a counterclockwise-rotating Alaska.

Siberia, Ural Mountains↗

Sea-floor spreading at the junction between Gorda Rise and Mendocino Ridge

A Quaternary deformation pattern revealed by new sub-bottom acoustic profiles supplements previous knowledge derived chiefly from magnetic and seismic evidence on the contemporary tectonics off northern California. An inferred age for the sedimentary cover along the axis of the southern part of Gorda Rise suggests that no volcanism has occurred along that part of the rise for more than 100,000 years. Sea-floor spreading at the rise crest has been accommodated by sinking of a keystone block that forms the floor of Escanaba Trough, the median valley of the rise. Differential movement between Pacific and American tectonic plates could have caused the deformation pattern, and during this movement, the displacement offshore beyond the northwest end of the San Andreas fault is inferred to have divided at Cape Mendocino between a fault along Mendocino Ridge and a fault segment that connects with the Blanco fault farther northwest.

California↗

Aeromagnetic and gravity investigations of the Coastal Area and Continental Shelf of Liberia, West Africa, and their relation to continental drift

An aeromagnetic survey has shown the existence of several basins in which magnetic basement depths are greater than 5 km on the continental shelf off Liberia. Magnetic diabase of 176 to 192 m.y. (Jurassic) in age intruding the Paleozoic (?) rocks and overlain by younger rocks onshore requires the distinction between “magnetic basement” and “basement.” Several lines of evidence suggest that the Paleozoic(?) rocks are less than 1 km thick; this implies that the diabase does not introduce a large error in depth-to-basement estimates. The dikes or their extrusive equivalents are traceable, on the basis of the magnetic data, beneath the younger sedimentary rock in the basins to the edge of the continental slope. The magnetic data also delineate a second zone of diabase dikes 90 km inland, parallel to the coast, which cross the entire country. The intrusion of the younger dikes probably coincides with rifting at the beginning of the separation of Africa and South America, and the associated magnetic anomaly zones appear to be parallel with and continuous into the anomaly bands in the Atlantic. A major northeast-trending break in the magnetic fabric intersects the coast near 9° W. and is associated with Eburnean age rocks (about 2000 m.y.) to the southeast as contrasted with Liberian-age rocks (about 2700 m.y.) to the northwest. Change in magnetic fabric direction inland from northeast to northwest in the coastal area allows recognition of a boundary between the Liberian-age rocks inland and Pan-African-age (about 550 m.y.) rocks in the coastal area northwest of about 9° 20'W. Sets of north-northwest-and west-northwest—trending faults of 1 to 2 km vertical displacement cut the Cretaceous sedimentary rocks onshore and can be traced into the offshore basins. Vertical displacements of several kilometers in the magnetic basement underlying the continental shelf suggest a pattern of block faulting all along the coast and continental shelf. Negative Bouguer anomalies exist over two Cretaceous basins in the coastal area; a negative Bouguer anomaly exists over one of the basins southwest of Monrovia, as shown by a marine traverse, suggesting that Cretaceous or younger sedimentary rocks fill these basins also. A 50 to 60 mgal positive Bouguer anomaly area exists along the coast from Sierra Leone to Ivory Coast. This anomaly correlates with mafic granulites in the Monrovia region, where the gradient is too steep to be entirely due to crustal thickening at the continental margin and may be related to tectonic activity associated with the basins. The only major break in this positive anomaly above basement rocks along the entire coast of Liberia is over granite gneiss adjacent to (and presumably underlying) the only onshore basins on the Liberian coast. Three seismic reflection profiles support the interpretation of a substantial section of sedimentary rock offshore. A suggested sequence of events indicates tectonic activity in the periods about 2700, about 2000, and about 550 m.y. B.P.; uplift and exposure of deep crustal rocks; deposition of Paleozoic sediments; intrusion of diabase dikes in inland zones; intrusion of 176 to 192 m.y.-old dikes and sills accompanying separation of Africa and South and North America; block faulting along coast and continental shelf, and active sea-floor spreading; filling of basins in Cretaceous and Tertiary(?) time; basaltic extrusion on spreading sea floor and sedimentation on continental shelf and slope.

West Africa↗

Distribution and age of high-grade blueschists, associated eclogites, and amphibolites from Oregon and California

Isolated blocks of high-grade blueschist and amphibolite facies metamorphic rocks occur within the Jurassic and Cretaceous eugeosynclinal deposits of the Coast Ranges of southwestern Oregon and California. The blocks range in size from individual rock masses commonly 5 to 1,000 ft in diameter to a few larger masses as much as 7 mi long and 2 mi wide. The high-grade blocks are predominantly basaltic in composition and include glaucophane schists, eclogites, and gneissic rocks of the amphibolite facies. Field relationships indicate that the blocks are closely associated with serpentine, that high-grade blueschist and amphibolite blocks, lower grade blueschists, volcanic rocks, and cherts occupy disturbed zones that may be related to thrusting, and that there is no exposed in situ provenance for the high-grade blueschists, eclogites, and amphibolites. Potassium-argon mineral ages of white mica and actinolite from the blueschists and of hornblende from the amphibolites indicate that these minerals crystallized approximately 150 m.y. ago, but the ages measured on glaucophane from the blueschist blocks are commonly younger. These data suggest that the high-grade blue-schist and amphibolite blocks represent fragments of a cryptic metamorphic terrane of pre-Tithonian age that have been tectonically mixed with younger rocks of the Franciscan Formation in California and Otter Point Formation in Oregon. The younger ages for glaucophane probably reflect metamorphic episodes in which lower grade in situ blueschist facies mineral assemblages were developed in the blocks after their emplacement within the Franciscan Formation. This pre-Tithonian cryptic metamorphic terrane probably developed as a result of interaction between oceanic and continental plates. The occurrence of tectonic blocks of this terrane within mélange zones in Oregon and California may be related to later plate interaction.

California, Oregon↗

Faults of the central part of the Lewis and Clark line and fragmentation of the Late Cretaceous foreland basin in west-central Montana

The Lewis and Clark line is a prominent zone of strike-slip, dip-slip, and oblique-slip faults that extends from near Wallace, Idaho, to east of Helena, Montana. Faults of this zone have been intermittently active from Middle Proterozoic to Holocene time, and because of numerous tectonic overprints, controversy continues about displacement directions and times of displacement along specific faults. Geologic mapping shows evidence that many principal faults of the Lewis and Clark line, such as the St. Marys-Helena Valley, Bald Butte, Ninemile, and Osburn faults, had right separation or slip that ranged between 28 and 11 km, and this displacement probably occurred during Late Cretaceous time. Other faults, such as the Elevation Mountain, Placer Creek, and Ranch Creek faults, have Late Cretaceous right separations that range between 8 and 3.2 km, and the Mount Sentinel fault zone has between 6.5 and 3 km of right separation of probable Late Cretaceous age. Subsidiary structures of the Lewis and Clark line postdate Paleozoic and Lower Cretaceous rocks and predate Late Cretaceous stocks at some places; subsidiary faults and folds that have age constraints have slip directions compatible with right slip along adjacent, principal faults. Sedimentation patterns of Lower and Upper Cretaceous rocks indicate that faults of the Lewis and Clark line fragmented the foredeep region of the foreland basin into separate northern and southern basins in Late Cretaceous time. The Lower and Upper Cretaceous Blackleaf Formation (Albian and lower Cenomanian) was deposited in a continuous foredeep basin that extended across the Lewis and Clark line from north of the Canadian border to southwestern Montana, a distance of about 450 km. North of the Lewis and Clark line, middle and upper Cenomanian rocks are absent, and a thin sequence of uppermost Cenomanian to Campanian rocks was deposited in a marine environment that changed to a strand-line and continental environment in early Campanian time. South of the Lewis and Clark line, middle and upper Cenomanian deposits are also absent, but a thick sequence of Turonian-to-Campanian rocks was deposited in brackish water and strand-line environments, and during later Campanian time, in a continental environment. In the region between the St. Marys-Helena Valley and Bald Butte faults, a barrier may have formed that served as a local sediment source between foredeep regions in the northern and southern foreland basin during the period 91 to 75 Ma. South of the Bald Butte fault, an extensional tectonic regime contributed to a higher sediment-accumulation rate in the foredeep region along the north border of the southern basin (30 cm/1,000 yr), as compared to lower sediment-accumulation rates (6.9 and 7.8 cm/ 1,000 yr) in the foredeep region of the south part of the northern basin.

Montana↗