USGS Science⌕ Search

SEARCH · USGS Science

Results for “Environmental Monitoring and Assessment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,662 records · Page 80Linked to original sources
USGS2023

Overview of the Cenozoic geology of the northern Harrat Rahat volcanic field, Kingdom of Saudi Arabia

The Harrat Rahat volcanic field, located in the west-central part of the Kingdom of Saudi Arabia, is one of the larger Cenozoic harrats among the more than 17 harrats situated upon the Arabia Plate. The map plate contained herein shows, at a scale of 1:100,000, the mapped volcanic geology of northern Harrat Rahat, which consists of the northernmost one-fifth of Harrat Rahat. Northern Harrat Rahat has an area of about 3,340 square kilometers (km 2 ), of which 2,567 km 2 is covered by Harrat Rahat volcanic rocks and deposits, and it encompasses more than 900 exposed vents (that is, craters, cryptodomes, maars, and scoria cones), 289 of which are isolated by younger volcanic deposits and have not been correlated with the 234 volcanic rock units distinguished by geologic mapping. Northern Harrat Rahat is of special interest owing to its proximity to the city of Al Madinah al Munawwarah, which sits within, and is continuing to expand southward over, the north end of the volcanic field. Al Madinah is home to an expanding population, currently at more than 2 million residents, together with the intermittent addition of approximately 3 million pilgrims during Hajj and Umrah (religious visitations). The center of Al Madinah is less than 8 km from lava flows of the only confirmed historically documented eruption, which occurred in 1256 C.E. (654 A.H.). Earlier prehistoric lava flows also encroached into the area of the present-day city limits, as demonstrated by volcanic rocks exposed widely throughout the city in roadcuts, parks, and excavations for new buildings, although no evidence has been found of any other than the 1256 C.E. lava having reached that area during times of human habitation. Geologic mapping was undertaken by the U.S. Geological Survey in collaboration with the Saudi Geological Survey. The features of primary interest within the map area are scoria cones, lava flows, lava domes, craters, and pyroclastic deposits from the Quaternary, which have compositions of basalt, hawaiite, mugearite, benmoreite, and trachyte. The geologic mapping was published by Downs and others (2019) on a single sheet at 1:75,000 scale and two detailed sheets at 1:25,000 scale, accompanied by detailed explanations of the geology. This report presents the geology on a single sheet at 1:100,000 scale and provides condensed geologic explanations for the convenience of readers of this volume. Some minor errors of nomenclature and lava source regions that do not change fundamental interpretations have been corrected herein.

Professional Paper↗
USGS2025

Structural analysis of brittle-plastic shear zones in the Sangre de Cristo Range, southern Colorado USA: Superposition of Rio Grande rift extension on Laramide contraction

The Sangre de Cristo Range in southern Colorado exposes some of the deepest Cenozoic structural levels in the Rocky Mountain region, including mylonitic shear zones associated with both the Laramide orogeny and Rio Grande rift. We investigated the relation between Laramide contraction and Rio Grande rift extension with detailed geologic mapping, kinematic analysis, and geochronometry in a 50 km 2 area centered on the Independence Mine shear zone (IMSZ). The 15−100-m-thick IMSZ is one of several shallowly to moderately (∼45° ± 20°) W-SW−dipping brittle-plastic shear zones along the western flank of the range. These shear zones display microstructural evidence of initiation as top-NE contractional mylonite zones, consistent with regional Laramide kinematics, which have been pervasively overprinted by shear fabrics indicating top-SW extensional reactivation. Both top-NE and top-SW shear fabrics involve cataclasis and quartz dislocation creep, although top-SW shear is more commonly localized along phyllosilicate-lined shear bands. Shear zones are hosted predominately within Proterozoic gneiss, and contain abundant chlorite and white mica derived from alteration of hornblende and feldspar, which indicates that weakening driven by fluid reactions played an important role in localizing strain. Extensional overprinting appears to be most pervasive along more steeply dipping portions of shear zones and where secondary phyllosilicates form an interconnected weak phase, which suggests that reactivation was primarily controlled by geometry and rheological contrasts inherited from contraction. One top-SW shear zone adjacent to the IMSZ cuts a late Oligocene gabbro stock, and monazite grains synkinematic with top-SW shear in the IMSZ yielded late Oligocene to Early Miocene U-Th-Pb dates that correspond with initiation of the Rio Grande rift. Reactivation of weak reverse faults may represent an important structural control during initial extension in the middle crust, prior to slip along the high-angle Sangre de Cristo normal fault system.

Colorado↗
USGS2026

Dynamic drainage reorganization in Eastern Tibet: Insights from the Yangtze River first bend

The modern drainage network of eastern Tibet is widely believed to have developed through a series of river capture and flow reversal events; however, the timing and mechanisms driving this reorganization remain contentious. Among these events, the river capture that formed the First Bend of the Yangtze River (YFB) stands out as both iconic and particularly debated. Here we present sedimentary provenance data from the Late Miocene–Quaternary Dali Basin, located south of the YFB, which indicate that a southward-flowing Jinsha River (i.e., the present-day upper Yangtze River) sourced sediment to the Dali basin at ∼7.4–6.4 Ma in a drainage configuration different from that of today. Because this interval postdates the initial establishment of a near-modern Jinsha River system prior to the Miocene, our results imply at least two discrete fluvial reorganizations occurred at the YFB—one preceding ∼7.4 Ma and another following ∼6.4 Ma. By integrating these findings with landscape evolution modeling, we infer that the initiation of rapid uplift of the Yulong-Haba Mountains and the Diancang Shan may have been responsible for these drainage reorganizations. These results underscore that Cenozoic drainage systems on the eastern Tibetan Plateau have evolved dynamically on a short timescale of ∼10 5 –10 6 -year, rather than remaining in a long-term stationary configuration on ∼10 7 -year timescales.

eastern Tibetan Plateau, first bend of the Yangtze↗
USGS2025

The feasibility of using lidar-derived digital elevation models for gravity data reduction

Gravity data require submeter elevation accuracy for data processing, and differential global navigation satellite system (dGNSS) equipment is commonly used to acquire three-dimensional positional data to achieve such accuracy. However, lidar (light detection and ranging) data are commonly used to develop digital elevation models (DEMs) of Earth’s surface. Therefore, using elevations from lidar-derived DEMs for gravity-data acquisition and reduction may improve field efficiency and reduce cost. This study examines the feasibility of using DEMs for gravity-data reduction by comparing dGNSS elevation data from 435 gravity stations in Michigan, Wyoming, and Colorado with their respective DEM elevations. The results show that the average difference between DEM and dGNSS elevations is 13 centimeters (cm) and that 93 percent of those differences are less than 50 cm, even in areas with steep terrain. Because an elevation discrepancy of 50 cm corresponds to an error of roughly 0.1 milligals (mGal) in the simple Bouguer gravity anomaly, the results suggest that lidar-derived DEMs are a viable source for acquiring the elevation data needed to process gravity data, thus improving both the cost and efficiency of data collection for regional surveys where an accuracy of less than 1.0 mGal is desired.

Open-File Report↗
USGS2026

Use of precariously balanced rocks to constrain postglacial earthquake magnitudes in New England, United States

We use the age and fragility of 13 precariously balanced rocks (PBRs) in Massachusetts, New Hampshire, and southwestern Maine to evaluate the estimated probabilistic seismic hazard (PSH) from the U.S. Geological Survey’s National Seismic Hazard Model (NSHM), and also develop a map of maximum postglacial earthquake magnitudes in the region. The PBRs are erratic boulders left behind by the retreat of the Laurentide ice sheet between 13 and 18 ka, and published ice retreat maps are used to estimate their fragility ages. The fragilities and ages of the rocks appear to be consistent with the NSHM, in that the estimated earthquake magnitudes and resulting ground motions that would topple them are only expected on timescales longer than their fragility ages. This result, on the North American passive margin, contrasts with PBR studies at active plate boundaries, where the PBR constraints imply large reductions to estimated PSH. It may be that the PBRs are not old enough in the eastern United States to reveal the same PSH modeling issues as those revealed in the plate boundary settings. The study provides constraints on maximum magnitudes of postglacial earthquakes across much of Massachusetts, New Hampshire, and southwestern Maine, with the constraints limited to the ages of the PBRs.

Maine. Massachusetts, New Hampshire↗
USGS2025

Long-term trends in microseismicity during operational shut-ins at the Coso Geothermal Field, California

Pausing injection and production can lead to induced seismicity in a variety of settings, with some of the largest events occurring during these so-called shut-ins. In geothermal fields, shut-ins are periodically conducted for maintenance on wells and surface infrastructure, thereby offering recurring means of estimating stress changes in the subsurface that lead to increased seismicity rates. Here, we examine daily production and microseismicity data from the Coso Geothermal Field (CGF) in California between 1996 and 2010 to investigate the repetitive trends of operational shut-in microseismicity. Using 24 local seismic stations, we first analyze spatial and temporal trends of over 60,000 earthquakes with magnitudes between -0.4 to 3.8. We find that the northern region exhibits no significant seismicity changes during shut-ins, whereas the rest of the field experiences induced seismicity during almost every shut-in with an increasing intensity towards the southern and eastern portions of the field, highlighting local differences in stress within the CGF. Additionally, we cluster the seismicity using waveform cross-correlation, revealing several earthquake clusters primarily occurring during shut-in periods. These observations suggest that certain fracture and fault sections respond quicker to changes in pore pressure and poroelastic stresses within the geothermal system, possibly highlighting main fluid pathways.

California↗
USGS1976

Geotechnical description of four Mississippi Delta soil borings

The submerged portion of the Mississippi Delta complex forms an ideal natural laboratory to study the effects of rapid deposition. One of the most obvious of these effects is the mass movements of sediments. Slump and slide signatures, mudflow characteristics, and evidence for creep are all found in abundance on the delta platform. These types of features have been studied by Colemen and Wright (1974) with regard to form and by Garrison (1974) with regard to their spatial distribution. Assembling these authors' findings, it is clear that the entire offshore zone contiguous with the Mississippi River is a myriad of geological action. This situation is indeed stimulating to the sedimentologist, yet it represents a nightmare to the foundation engineer. Emplacing offshore structures in such an environment is a most difficult task, particularly since the high degree of local variability dictates that each case must be handled separately. It is under these circumstances that a marriage between geology and engineering is most fruitful, for determining the relationships between the sedimentological processes and the engineering properties is satisfying to parties from both disciplines. This, then, is the underlying objective of the Mississippi Delta research project. By investigating the instability in a geologic sense, it is hoped that many of the engineering problems will become more soluble and that extrapolation and prediction will become more realistic.

Mississippi Delta↗
USGS2026

Ground motions from finite faults with unknown geometry

Earthquake emergency response and loss modeling require accurate models of ground‐motion intensity metrics (IMs), such as those produced by ShakeMap. In the critical minutes and hours after an earthquake, however, knowledge of the earthquake source geometry limits the accuracy of these models, especially in areas where seismic instrumentation is insufficient to constrain the shaking intensity pattern. Previous attempts to overcome this limitation have centered on computing the mean distance metrics from a suite of assumed source geometries. That approach is inadequate with modern ground‐motion models (GMMs) because they typically include terms for the hanging wall effect, depth to top of rupture, and other nonlinear terms. Such approaches also propagate the distance uncertainty through the GMMs and may not properly allocate the additional uncertainty into the between‐ and within‐event components. Here we present Finite‐Fault SIMulation with Mixed Effects Regression (FFSIMMER), a method to address these limitations by computing IM distributions from a suite of rupture realizations that fully accounts for all geometry‐related GMM terms and allows for the separation of the between‐ and within‐event components of the total uncertainty. The accuracy of this method is limited by the available constraints on the source parameters. To address this, FFSIMMER can incorporate constraints based on knowledge of the source, such as the approximate strike and dip based on knowledge of the plate tectonics and focal mechanism of the earthquake. We demonstrate the improvement in accuracy that can be achieved with the 2025 M 7.7 Mandalay, Burma (Myanmar), earthquake by incorporating constraints on the range of plausible source parameters.

Bulletin of the Seismological Society of America↗
USGS2026

Northern bobwhites select for native grasses on working grazing land

Northern bobwhite ( Colinus virginianus ; bobwhite) populations have experienced an 85% decline across most of its range since the 1960s. The most drastic decreases have been in the southeastern United States where biologists attribute the decline to widespread habitat loss, including conversion of native grasslands to tall fescue ( Lolium arundinaceum ) and other exotic cool-season grass (CSG) pasture and hayfields. Including agricultural lands in conservation programs could improve habitat conditions on a regional scale. One working-lands conservation strategy involves the use of native warm-season grasses (NWSGs) rather than cool-season exotic grasses as economically viable cattle forage. To evaluate this management practice for creating bobwhite habitat, we conducted a field study on a bobwhite population in eastern Kentucky, USA, where grazed NWSG and burned NWSG fields were adjacent to exotic grazed and exotic hayed CSG fields. Between April 2019 and October 2022, we used radio telemetry to track bobwhites to evaluate resource selection at second- and third-order scales. Bobwhites used traditionally managed CSGs less than would be expected by chance at the second-order scale in both breeding and non-breeding seasons. Bobwhite use of grazed NWSG and burned NWSG was greater than would be expected by chance at the second-order scale in both breeding and non-breeding seasons. Similarly, at the third-order scale, bobwhites used CSGs less than would be expected by chance, whereas NWSGs and woody stems were used more than by chance alone. Our study suggests that bobwhites select NWSGs at multiple spatial scales despite broad-scale availability of managed exotic CSGs. Under a working-lands framework, the integration of NWSGs into working lands could create bobwhite habitat in the southeastern United States, especially if woody stems are present.

Kentucky↗
USGS2024

Diel temperature signals track seasonal shifts in localized groundwater contributions to headwater streamflow generation at network scale

Groundwater contributions to streamflow sustain aquatic ecosystem resilience; streams without significant groundwater inputs often have well-coupled air and water temperatures that degrade cold-water habitat during warm low flow periods. Widespread uncertainty in stream-groundwater connectivity across space and time has created disparate predictions of energy and nutrient fluxes across headwater networks, hindering predictions of cold-water habitat resilience under climate change scenarios. Recently, annual paired air and water temperature signals have been harnessed to indicate stream water thermal sensitivity and the dominance of deep versus shallow groundwater influence, although the utility of diel air–water temperature signal metrics for hydrologic inference has remained unexplored. Here we analyzed two consecutive years of locally paired, air–water temperature data from 47 headwater stream sites in the Catskill Mountains, New York, USA, and discovered characteristic seasonal patterns in diel temperature signal sinusoid metrics (amplitude ratio, phase lag, and mean ratio) driven by shifts in streamflow generation mechanisms and stream network position. Hydrologic interpretations of observed patterns were supported by stream heat budget model scenarios and additional analysis of paired air–water temperature data from two streams in Shenandoah National Park, Virginia, USA, with well characterized stream-groundwater connectivity. We found that within smaller tributaries, streamflow generation transitions from runoff to groundwater dominance were driven by hillslope drying during seasonal periods of lower precipitation. This was evidenced by significant correlations (p < 0.01) between daily water:air temperature signal amplitudes (non-linear decreases of ∼ 50 %) and derived base-flow index at 22 of the 28 sites, indicating enhanced local groundwater influence on streamflow promotes decoupling of diel air–water temperature signals. Additionally, ratios between daily water:air temperature signal means were lower in tributaries (∼0.68) when compared to main-stem (∼0.8) sites, increasing linearly throughout the observational period. In conceptual stream heat budget models, groundwater inflow had minimal effects on daily phase lags (∼0.2 hr), but increases in fractional groundwater discharge (0–50 %) depressed daily amplitude (∼20 % to 50 %) and mean ratios (∼15 %), supporting the sensitivity of daily metrics to interpreted changes in seasonal groundwater contributions to streamflow. During observational periods (i.e., April through October 2021 and 2022), significant differences (p < 0.01) between tributary and main-stem air–water metrics occurred when base-flow contributions were highest (∼0.93 vs. ∼ 0.68), as sites lower in the network had daily temperature metrics dominated by stream channel thermal inertia, rather than local groundwater connectivity, showing enhanced air–water diel signal coupling during warmer, drier periods. Divergent air temperature coupling across the network was interpreted as being driven by distance from local groundwater source zones, additional lateral groundwater inflows do not contribute a meaningful fraction to channel discharge lower in the network. Given the growing footprint of stream temperature observations, diel air–water temperature signals can provide distributed metrics sensitive to upstream groundwater discharge. Consequently, these metrics can support ongoing efforts by resource managers and researchers seeking to forecast the resilience of cold-water habitat to climate warming and changing precipitation regimes in mountain headwater streams.

New York, Virginia↗
USGS2024

How does the onset of offset influence geologic slip rates?

Geologic slip rates are typically based on the displacement accrued by a geomorphic or stratigraphic feature and the age of the offset feature. Because slip rates are commonly calculated by dividing the displacement of a faulted marker by its age, they contain two open time intervals: the elapsed time between the age of an offset feature and the age of the earthquake that displaced the feature, and the time between the present‐day and the most recent earthquake. Here, we explore the influence of including unconstrained open intervals in geologic slip rate calculations. We test the degree to which these open intervals affect geologic slip rates and their uncertainties, and we find that their influence depends primarily on mean earthquake recurrence intervals (RIs). Slip rates on faults with longer RIs, such as the Wasatch fault, can be greatly influenced by an increase of up to 20% when accounting for open intervals. In contrast, slip rates on faults with shorter RIs, such as the San Andreas fault, are only slightly influenced by the assumption that slip rates calculated over open intervals approximate those calculated over closed intervals. Our analyses indicate that faults with moderate slip rates (∼0.2–5 mm/yr) are sensitive to both open interval effects themselves, as well as methods to quantify and account for these effects. We re‐evaluate how slip rates are calculated and defined in displacement–time space using published deformation records. We explore the utility of assigning a probability distribution to the initiation of offset of the oldest faulted feature and the timing of the most recent earthquake (MRE). We find that calculating geologic slip rates without using probability distributions that capture the timing of the MRE and the onset of offset of the oldest faulted feature, especially on slow‐to‐moderate slip rate faults, can lead to systematic underestimation of average geologic slip rates.

Seismological Research Letters↗
USGS2024

A great tsunami earthquake component of the 1957 Aleutian Islands earthquake

The great 1957 Aleutian Islands earthquake ruptured ∼1200 km of the plate boundary along the Aleutian subduction zone and produced a destructive tsunami across Hawaiʻi. Early seismic and tsunami analyses indicated that large megathrust fault slip was concentrated in the western Aleutian Islands, but tsunami waves generated by slip in the west cannot explain the large observed runup in Hawaiʻi far to the southeast. Recently mapped 1957 geologic deposits on eastern Aleutian Islands suggest occurrence of very large nearby slip. Jointly modeling tsunami runup along the eastern Aleutian and Hawaiian Islands together with tide gauge recordings across the Pacific resolves 12-26 m shallow slip along 600 km of the eastern Aleutian Islands in addition to modest, deeper western slip inferred from seismic records. The eastern near-trench slip results in an M W 8.3-8.6 tsunami earthquake component of the M W 8.6-8.8 rupture, comparable in size to the adjacent 1946 Aleutian tsunami earthquake to the east. The reexamination of the 1957 rupture confirms the tsunami hazards posed by the eastern Aleutian subduction zone to Hawaiʻi and lays the groundwork for investigation of large prehistoric earthquakes through modeling tsunami runup inferred from stratigraphic observations to constrain their rupture processes.

Alaska↗
USGS2025

Formation of the Mount Weld rare earth element deposit, Western Australia: A carbonatite-derived laterite

Carbonatite-hosted rare earth element (REE) deposits are the primary source of the world’s light REEs. The Mount Weld REE deposit in Western Australia is hosted in a lateritic sequence that reflects supergene enrichment of the underlying carbonatite. Water-rock interaction is a key to the formation of this world-class deposit. REE enrichment in the laterite is controlled by the breakdown of primary minerals, the release and transport of REEs, and the formation of secondary minerals. Secondary REE-bearing phosphate minerals are the primary REE-host phases in the laterite ore with monazite as the dominant phase; other REE-bearing phases include rhabdophane, cerianite, churchite, florencite, and crandallite subgroup minerals. Profiles through the laterite show that in the REE-rich zone, apatite and primary calcite and dolomite have broken down such that the loss of Ca and Mg, as well as Si and K, leads to a relative increase in the REEs. Sequestering of REEs in secondary mineral phases formed by groundwater further enhances the REE concentration.

Mount Weld Mine↗
USGS2025

Geologic map of the Buckner 7.5-Minute quadrangle, Louisa County, Virginia

The Buckner 7.5-minute quadrangle straddles three terrane boundaries in the Piedmont Physiographic Province in central Virginia: the Chopawamsic terrane, the Elk Hill Complex, and the Goochland terrane. In much of the map area, the Elk Hill Complex separates the Chopawamsic and Goochland terranes. Rocks of the Chopawamsic terrane include Ordovician metavolcanic and metasedimentary rocks of the Chopawamsic Formation, Ordovician to Silurian granodiorite sheet intrusions, and Paleozoic mafic intrusions. Silurian to Devonian rocks of the Quantico Formation, mostly garnet-mica schist, crop out in the northwesternmost part of the map area, and are in unconformable contact with rocks of the Chopawamsic Formation on the southeastern limb of the Quantico synclinorium. The main map unit in the Elk Hill Complex is Neoproterozoic mica gneiss, which is in pre-metamorphic fault contact with rocks of the Chopawamsic Formation to the west. The main map unit of the Goochland terrane is the Maidens Gneiss. Except for Jurassic diabase dikes, all rocks on the Buckner 7.5-minute quadrangle were metamorphosed to amphibolite facies during the Alleghanian orogeny and preserve multiple compositional and phyllosilicate penetrative foliations. Evidence of amphibolite-facies metamorphism during the Taconic orogeny is preserved in rocks of the Elk Hill Complex. The entire width of the Maidens Gneiss on the Buckner 7.5-minute quadrangle is within the Spotsylvania high-strain zone and amphibolite-facies mylonitic textures are pervasive. Quartz veins and Jurassic diabase dikes crosscut all older rocks of the quadrangle. Multiple levels of terrace deposits are present along and near the major streams of the quadrangle. The lower terrace deposits are likely remnants of former positions of the Little River on the landscape, whereas higher deposits may be remnants of former deposits of the Atlantic Coastal Plain that covered this portion of the Piedmont Province. A linear cluster of aftershocks from the magnitude 5.8 earthquake that occurred near Mineral, Virginia, in 2011 defines the Fredericks Hall fault, which is at depth on the Buckner quadrangle. Most of the aftershocks occurred in the core of the Elk Creek antiform and have no relation to faults mapped at the surface. Several abandoned crushed stone and building stone quarries, as well as a mica prospect, exist in the quadrangle.

Virginia↗
USGS2026

Discrete element investigation of the influence of shallow soil density on the manifestations of strike-slip surface fault rupture

This study investigates the influence of soil relative density on strike-slip surface fault rupture manifestations using three-dimensional numerical simulations performed with the discrete element method (DEM). The simulations capture the formation of distinctive fault strands within complex flower structures using tens of millions of grains. The tendency for dense soils to localize shear manifests as multiple localized shear bands within wide zones of deformation in strike-slip fault rupture, whereas diffuse shear deformation develops within narrow zones in loose soils. The spatial extents of soil deformation are consistent between simulations having similar relative densities but with different quantities of grains. However, individual shears are more distinguishable in assemblages of finer grains than in assemblages of coarser grains. The simulations show the progressive development of new shears within the bounds of previously developed shears. Shear activity transitions inward as fault activity diminishes along the outermost shears and continues along newly developed shears until a vertically dipping throughgoing shear structure develops that accommodates most of the fault displacement thereon. The throughgoing fault develops at smaller fault displacements in looser soils because the first shear rupture propagates closer to the vertical direction and does not undergo as much inward translation of shear activity, as is observed in denser soils. In all simulations, ground surface uplift develops between nonintersecting active shears, and ground surface subsidence tends to develop where new shears intersect previous shears. The surface traces in these simulations are shown to be consistent with analog models and case histories of surface fault rupture occurring in different shallow subsurface materials. Although computationally costly, these modeling results are valuable for providing a strong numerical supplement to traditional analog models used to represent the mechanics of strike-slip zones in soil, and they provide quantifiable stresses and large-strain deformations throughout the model domain.

Journal of Geotechnical and Geoenvironmental Engin↗
USGS2023

Explosive trachyte eruptions from the Al Efairia volcanic center in northern Harrat Rahat, Kingdom of Saudi Arabia

Harrat Rahat is an alkali basalt, continental, intraplate volcanic field located within the central-western part of the Kingdom of Saudi Arabia. The northern quarter of Harrat Rahat contains evolved volcanic products that achieve trachyte compositions (>60 weight percent SiO 2 ). Within the Al Efairia volcanic center, pyroclastic-flow and -surge deposits that reflect explosive trachyte volcanism (and minor exposed lava domes that reflect effusive trachyte eruptions) sit at the surface as the youngest expression of volcanic activity within this part of the Harrat Rahat volcanic field. Five trachyte deposits emplaced explosively have been identified within the Al Efairia volcanic center based on geologic mapping, petrography, geochemistry, and paleomagnetism. These units are the trachytes of Um Rgaibah, Gura 5, Gura 4, Al Efairia, and Al Qayf, in descending stratigraphic order. Here, we present 14 40 Ar/ 39 Ar analyses from four of these units, which yield eruption ages of 4.2±5.2 thousand years (ka) for the trachyte of Um Rgaibah, 79.7±1.6 ka for the trachyte of Gura 5, 84.3±1.6 ka for the trachyte of Gura 4, and 88.0±1.8 ka for the trachyte of Al Efairia. The eruption age of the trachyte of Al Qayf has been constrained to between 410.3±3.4 and 418.8±1.9 ka using paleomagnetic correlations and 40 Ar/ 39 Ar ages from overlying and underlying intermediate composition lava flows. Most of these trachytes have distinct geochemical compositions, petrographic characteristics, and directions of remanent magnetization. The exceptions are for the trachytes of Gura 4 and Gura 5, which overlap in their geochemical, petrographic, paleomagnetic, and geochronologic affinities. Based on these similarities, we interpret the trachytes of Gura 4 and Gura 5 to have erupted during a closely spaced (a few decades) time interval from the same magma batch but from craters that are >2 kilometers (km) apart. The eruption of the trachyte of Al Efairia at 88.0±1.8 ka is the result of a different magma batch that erupted a few thousand years prior to the trachytes of Gura 4 and Gura 5. The Al Efairia volcanic center is remarkably different from the Matan volcanic center located ~10 km to the north, which has also erupted young (<150 ka) trachytes. The Matan volcanic center has been shown to produce trachyte compositions only after eruption of basalt followed by intermediate lava flows, whereas only trachyte compositions have erupted within the Al Efairia volcanic center over this same time interval.

Al Efairia volcanic center, Harrat Rahat↗
USGS1976

Corwin Springs Known Geothermal Resources Area, Park County, Montana

The Corwin Springs Known Geothermal Resources Area (KGRA) is contiguous to Yellowstone National Park along a part of the northern boundary of the park near Gardiner, Park County, Mont. The area contains two known sites of hot-spring activity--LaDuke Spring, 2.8 km southeast of the small resort community of Corwin Springs, and Bear Creek Spring, 2.6 km east of Gardiner. LaDuke Spring issues from brecciated quartzite and has a flow rate of 380 1/min, a surface water temperature of 65°C, a silica-geothermometer temperature of 68.7°C, and a Na-K-Ca geothermometer temperature of 76.8°C. Bear Creek Spring issues from limestone and has a flow rate of 4 1/min, a surface water temperature of 32°C, a silica temperature of 46.7°C, and a Na-K-Ca temperature of 87.2°C. The springs, which are actively depositing travertine, are on or near the trace of the Gardiner fault-a high-angle reverse fault which forms the southwestern boundary of the Beartooth uplift. Features that make the Corwin Springs KGRA potentially significant include: (1) Proximity of the Corwin Springs area to significant Pliocene and Pleistocene volcanism in Yellowstone National Park and related geothermal activity, (2) existence of a large potential geothermal reservoir in the northern extension of the Sepulcher Mountain graben, (3) localization of thermal activity along the Gardiner fault in the Corwin Springs area, (4) occurrence of negative gravity anomaly centered over the northern end of the Sepulcher Mountain graben, (5) existence of negative magnetic anomaly in the Corwin Springs area, (6) location of the area within the Intermountain seismic belt, (7) evidence of recent tectonism in the area, as demonstrated by Pleistocene and Holocene faulting, and (8) observed surface temperatures and estimated geochemical temperatures of the two known hot springs (features which do not indicate high subsurface temperatures).

Montana↗
USGS2024

The Europa Imaging System (EIS) investigation

The Europa Imaging System (EIS) consists of a Narrow-Angle Camera (NAC) and a Wide-Angle Camera (WAC) that are designed to work together to address high-priority science objectives regarding Europa’s geology, composition, and the nature of its ice shell. EIS accommodates variable geometry and illumination during rapid, low-altitude flybys with both framing and pushbroom imaging capability using rapid-readout, 8-megapixel (4k × 2k) detectors. Color observations are acquired using pushbroom imaging with up to six broadband filters. The data processing units (DPUs) perform digital time delay integration (TDI) to enhance signal-to-noise ratios and use readout strategies to measure and correct spacecraft jitter. The NAC has a 2.3° × 1.2° field of view (FOV) with a 10-μrad instantaneous FOV (IFOV), thus achieving 0.5-m pixel scale over a swath that is 2 km wide and several km long from a range of 50 km. The NAC is mounted on a 2-axis gimbal, ±30° cross- and along-track, that enables independent targeting and near-global (≥90%) mapping of Europa at ≤100-m pixel scale (to date, only ∼15% of Europa has been imaged at ≤900 m/pixel), as well as stereo imaging from as close as 50-km altitude to generate digital terrain models (DTMs) with ≤4-m ground sample distance (GSD) and ≤0.5-m vertical precision. The NAC will also perform observations at long range to search for potential erupting plumes, achieving 10-km pixel scale at a distance of one million kilometers. The WAC has a 48° × 24° FOV with a 218-μrad IFOV, achieving 11-m pixel scale at the center of a 44-km-wide swath from a range of 50 km, and generating DTMs with 32-m GSD and ≤4-m vertical precision. The WAC is designed to acquire three-line pushbroom stereo and color swaths along flyby ground-tracks.

Space Science Reviews↗