USGS Science⌕ Search

USGS · 70120623

A spatially referenced regression model (SPARROW) for suspended sediment in streams of the Conterminous U.S.

Abstract

Suspended sediment has long been recognized as an important contaminant affecting water resources. Besides its direct role in determining water clarity, bridge scour and reservoir storage, sediment serves as a vehicle for the transport of many binding contaminants, including nutrients, trace metals, semi-volatile organic compounds, a nd numerous pesticides (U.S. Environmental Protection Agency, 2000a). Recent efforts to addr ess water-quality concerns through the Total Maximum Daily Load (TMDL) process have iden tified sediment as the single most prevalent cause of impairment in the Nation’s streams a nd rivers (U.S. Environmental Protection Agency, 2000b). Moreover, sediment has been identified as a medium for the tran sport and sequestration of organic carbon, playing a potentia lly important role in understa nding sources and sinks in the global carbon budget (Stallard, 1998). A comprehensive understanding of sediment fate a nd transport is considered essential to the design and implementation of effective plans for sediment management (Osterkamp and others, 1998, U.S. General Accounting Office, 1990). An exte nsive literature addr essing the problem of quantifying sediment transport has produced a nu mber of methods for estimating its flux (see Cohn, 1995, and Robertson and Roerish, 1999, for us eful surveys). The accuracy of these methods is compromised by uncertainty in the concentration measurements and by the highly episodic nature of sediment movement, particul arly when the methods are applied to smaller basins. However, for annual or decadal flux es timates, the methods are generally reliable if calibrated with extended periods of data (Robertson and Roerish, 1999). A substantial literature also supports the Universal Soil Loss Equation (U SLE) (Soil Conservation Service, 1983), an engineering method for estimating sheet and rill erosion, although the empirical credentials of the USLE have recently been questioned (Tri mble and Crosson, 2000). Conversely, relatively little direct evidence is available concerning the fate of sediment. The common practice of quantifying sediment fate with a sediment deliv ery ratio, estimated from a simple empirical relation with upstream basin area, does not artic ulate the relative importance of individual storage sites within a basin (Wolman, 1977). Rates of sediment deposition in reservoirs and flood plains can be determined from empirical measurement s , but only a limited number of sites have been monitored, and net rates of deposition or loss from other potential sinks and sources is largely unknown (Stallard, 1998). In particular, little is known about how much sediment loss from fields ultimately makes its way to stream channels, and how much sediment is subsequently stored in or lost from th e streambed (Meade and Parker, 1985, Trimble and Crosson, 2000). This paper reports on recent progress made to a ddress empirically the question of sediment fate and transport on a national scale. The model pres ented here is based on the SPAtially Referenced Regression On Watershed attr ibutes (SPARROW) methodology, fi rst used to estimate the distribution of nutrients in str eams and rivers of the United Stat es, and subsequently shown to describe land and stream processes affecting the delivery of nutrients (Smith and others, 1997, Alexander and others, 2000, Preston and Brakeb ill, 1999). The model makes use of numerous spatial datasets, available at the national level, to explain long-term sediment water-quality conditions in major streams and rivers throughou t the United States. Sediment sources are identified using sediment erosion rates from the National Resources I nventory (NRI) (Natural Resources Conservation Service, 2000) and apportioned over the landscape according to 30- meter resolution land-use information from th e National Land Cover Data set (NLCD) (U.S. Geological Survey, 2000a). More than 76,000 reservoirs from the National Inventory of Dams (NID) (U.S. Army Corps of Engin eers, 1996) are identified as pot ential sediment sinks. Other, non-anthropogenic sources and sinks are identified using soil in formation from the State Soil Survey Geographic (STATSGO) data base (Schwarz and Alexander, 1995) and spatial coverages representing surficial rock t ype and vegetative cover. The SPA RROW model empirically relates these diverse spatial datasets to estimates of long-term, mean annual sediment flux computed from concentration and flow measurements co llected over the period 1985 -95 from more than 400 monitoring stations maintained by the Na tional Stream Quality Accounting Network (Alexander and others, 1998), the National Wa ter Quality Assessment Program, and U.S. Geological Survey District offices (Turcios and Gray, in press). Th e calibrated model is used to estimate sediment flux for over 60,000 stream segments included in the River Reach File 1 (RF1) stream network (Alexander and others, 1999). SPARROW uses statis tical methods to calibrate a simple, structural model of riverine water quality, one that imposes mass ba lance in accounting for changes in contaminant flux. As applied here, the mass-balance approach facilitates the interpretation of model results in terms of physical processes affecting sediment transport, and makes possible the estimation of various rates of sediment generation and loss associated with stream channels and features of the landscape. The statistical approach provides a basi s for assessing the error of these inferred rates and of the error in extrapolated estimates of sediment flux made for streams in the RF1 network. An important implication of the holistic modeling approach adopted in this analysis is that estimates of sediment production and loss ar e based on, and therefore consistent with, measurements of in-stream flux. Other ancillary information, such as direct measurements of long-term sediment storage and release from rese rvoirs (Steffen, 1996), is incorporated into the analysis by specifying additional equations expl aining these ancillary variables. The imposition of cross-equation constraints affords this info rmation a statistically consistent weight in explaining in-stream sediment flux. Thus, the me thodology described here represents a general framework for synthesizing a wide spectrum of available information relevant to the understanding of sediment fate and transport.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: 25.08° to 49.38905° latitude; -124.68721° to -66.96466° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Gregory E. Schwarz, Richard A. Smith, Richard B. Alexander, John R. Gray. 2001. A spatially referenced regression model (SPARROW) for suspended sediment in streams of the Conterminous U.S.. https://pubs.usgs.gov/publication/70120623

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Authoritative knowledge infrastructure for GeoAI: Implications for scientific spatial data providers

Geospatial Artificial Intelligence (GeoAI) increasingly relies on automated analysis of authoritative geospatial data, exposing limitations in data infrastructures originally designed for simple dissemination rather than for knowledge-driven use. From the perspective of scientific spatial data providers, the challenge is enabling GeoAI responsibly while retaining semantic clarity, provenance, reproducibility, and governance. This short paper (i) examines how GeoAI exposed limitations within existing geospatial data infrastructures, and (ii) identifies provider-side requirements for an authoritative knowledge infrastructure. Drawing on GIScience, scientific workflow, and operational AI literature, the paper outlines implications for national mapping organizations that seek to support advanced analytics without jeopardizing scientific rigor or stewardship responsibilities.

Conference Paper↗

Springs of the Catskill Mountains: A conduit flow system in predominantly siliciclastic strata

The Catskill Mountains of New York state are composed of thick sequences of interbedded mudstone, sandstone, and siltstone that are intercalated with thin beds of paludal limestone and calcareous mudstone. Sandstones often contain rip-up clasts of calcareous material at their bases and contain minor amounts of carbonate cement throughout their mass. This minor amount of calcareous material weathers out to produce thin zones of solutional porosity and permeability integrated within perched aquifers that feed perennial hillslope springs. Solutional features are evident within thin carbonate lenses and along fractures in sandstones, occasionally resulting in explorable cave-sized conduits. This study focuses on the behavior of bedrock springs and seeps in the headwaters of the Neversink River basin above the Neversink Reservoir. Bedrock springs are numerous throughout the Catskill Mountains and serve to provide baseflow to the headwater streams that tends to be more persistent during dry times than other baseflow sources. We observed dissolution-influenced conduits within the bedrock, and suffosional conduits within unconsolidated materials. Continuous water temperature at six springs was monitored at hourly intervals from May to October 2022 to investigate the thermal response of groundwater to daily and seasonal changes in air temperature along with event-based meteorological events. Temperature monitoring was augmented at some springs with time-lapse photography to evaluate persistence of flow. The thermal responses of springs to precipitation events were highly variable across sites, with some springs exhibiting flashy responses indicating a strong connection to the surface, while other springs showed muted or no thermal response to events. The seasonal thermal response also varied across sites having lag times of 23-48 days between peak air temperature and peak spring water temperature. The water temperatures and geochemical compositions of these bedrock springs support a conceptual model of multiple residence times, showing both event and seasonal groundwater storage within the conduit flow system that feeds the springs of the Catskill Mountains.

New York↗

Stability changes after weak layer collapse: Insights from an unexpected dataset

While conducting avalanche mitigation or traveling through the backcountry, avalanche professionals sometimes experience a "whumpf": a collapse-mode crack accompanied by surface cracking that does not produce an avalanche. These whumpfs are a clear warning sign of instability in the surrounding terrain. But assessing the collapsed slope itself, if it is steep enough to avalanche, carries much more uncertainty. Can slopes that whumpf and are steep enough to slide still avalanche? The answer to this question supports avalanche mitigators and ski guides in assessing whether to open such slopes. Previous research on collapsed slopes is limited to one study conducted before tests that estimate crack propagation propensity, such as the Propagation Saw Test (PST), were developed. This work showed that weak layer shear strength decreased immediately after collapsing and then increased over time. However, no research has examined crack propagation propensity after a whumpf. Studying propagation propensity is key for assessing how whumpfs immediately affect slope stability. To improve our understanding of changes in propagation propensity following weak layer collapse, we conducted PSTs on a test slope in the hours and days after an unexpected collapse occurred on a layer of surface hoar. Two PSTs at our study site three days prior to this collapse provided an estimate of weak layer propagation propensity. PST cut lengths decreased immediately following the collapse, suggesting that the collapse increased the propagation propensity. However, over the next 4-5 hours, PST cut lengths steadily increased at our site, likely due to ongoing sintering and strengthening in the collapsed weak layer. By the end of day two, we were no longer able to initiate propagation, suggesting substantial stabilization of the weak layer. Our results support prior findings and observations suggesting that slopes may remain capable of producing avalanches immediately after a collapse but likely stabilize over the next day or two. Although this research does not provide answers about precisely when a slope becomes stable after a collapse, it does highlight uncertainties in our understanding and interpretation of the stability of slopes that have whumped.

Montana↗