USGS Science⌕ Search

SEARCH · USGS Science

Results for “Contributions to Mineralogy and Petrology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,674 records · Page 77Linked to original sources
USGS2025

What 25+ years of "Did You Feel It" intensities tell us about shaking in California

“When will the Big One happen?” is a question that people often have for earthquake scientists. But while waiting for the “Big One” to occur, people will usually experience frightening or damaging shaking from multiple relatively smaller‐magnitude earthquakes. Given this context, it raises the question: “Where does most of the damage come from?” Could smaller, yet more frequent, earthquakes account for the majority of reported impactful shaking? To explore this question, we consider reports of earthquake damage and felt shaking experiences from a catalog of community‐collected intensity values from the U.S. Geological Survey’s “Did You Feel It?” system. Comparing these intensities to expectations from a ground‐motion model, we find that earthquakes of magnitudes smaller than expected are responsible for most reported intensities of community decimal intensities (CDI) 4.5 and above (moderate and higher shaking intensity levels). (Here “expected value” is meant in its mathematical sense of the mean or equivalently median shaking intensity.) We also present a regional analysis of observed earthquake shaking for specific areas, detailing the maximum intensity experienced within a predetermined area. We identify several instances of M < 4.5 events that generated maximum intensities of CDI > 5 in regions in California surrounding the cities of Eureka, San Francisco, Los Angeles, and San Diego. Our results motivate the need to include smaller‐magnitude earthquakes in communications about earthquake hazard and risk reduction.

California↗
USGS2025

RioM-1: A new calcite reference material for U-Pb LA-ICP-MS geochronology

Determining absolute ages of carbonate diagenesis, faulting, fossil formation, speleothem growth, carbonate-hosted hydrocarbon deposits, vein mineralisation and hydrothermal alteration has become increasingly accessible through LA-ICP-MS U-Pb dating of calcite, complementing traditional isotope dilution methods still applicable to certain materials (e.g., speleothems via micro-drilling). However, well-calibrated reference materials for LA-ICP-MS calcite geochronology remain scarce. Here, we characterise the Rio Maior calcite, designated ‘RioM-1’, as a potential reference material for U-Pb dating by LA-ICP-MS. Fragments (0.1 to 1 cm 3 ) from a single scalenohedral crystal were analysed by ID-TIMS (U-Pb), LA-ICP-MS (U-Pb and 87 Sr/ 86 Sr), and SIMS (O isotopes). RioM-1 displays high U mass fraction and low, though variable, proportions of common Pb. Combined ID-TIMS analyses from two independent laboratories yielded a Tera-Wasserburg lower intercept date of 63.93 ± 0.11 Ma (2 s , MSWD = 1.3, n = 16). LA-ICP-MS U-Pb data from three independent laboratories are concordant with the TIMS age, producing a pooled date of 64.10 ± 0.12/1.2 Ma (2 s , MSWD = 7.7, n = 708) and an initial 207 Pb/ 206 Pb ratio of 0.85 ± 0.01. Other calcite reference materials, when normalised to RioM-1, yielded dates within uncertainty of their published values. SIMS measurements returned a mean 18 O/ 16 O of 0.002044450 ± 181 (1 s ) and δ 18 O SMOW of 19.57 ± 0.92‰ (1 s ), while LA-ICP-MS strontium isotope measurement yielded a mean 87 Sr/ 86 Sr of 0.708177 ± 9 (2 s ).

Geostandards and Geoanalytical Research↗
USGS2025

Do bighorn sheep use desert tortoise burrow spoil piles as mineral licks in southern California?

In a previous study, bighorn sheep ( Ovis canadensis ) were periodically photographed by trail cameras when they visited desert tortoise ( Gopherus agassizii ) burrows in the San Bernardino Mountains near Palm Springs, California, USA. The authors suggested that bighorn sheep may utilize the excavated spoil material from burrows as a mineral lick. To test that supposition, we collected soil samples from the spoil piles and undisturbed surface soil up to 1 m away at two desert tortoise study sites with bighorn sheep at the aforementioned site and another nearby site. We hypothesized that sodium concentrations would be greater in spoil than in nearby surface soil samples. Common major cations were quantified in soil samples using inductively coupled plasma-mass spectrometry following microwave-assisted digestion to solubilize the fraction of elements that could become biologically or environmentally available. Mean sodium concentrations were greater in burrow spoil samples than in undisturbed soil samples at both sites, likely due to aqueous leaching of sodium from surface to subsurface soil horizons. Although we did not collect evidence of geophagy by bighorn sheep, the behavior is well known. However, trail camera photographs of bighorn sheep with their head next to the entrance of tortoise burrows suggests that they may periodically utilize sodium and other elements brought to the surface by desert tortoises that are otherwise unavailable to bighorn sheep on the surface.

California↗
USGS1988

Geology of an area near Brentwood, Williamson County, Tennessee

The lithology and geologic structure of an area near Brentwood, Williamson County, Tennessee, were studied to define the potential aquifers and confining units of the ground-water flow system. Four formations were identified. They are, in descending order, the Bigby-Cannon Limestone, the Hermitage Formation, the Carters Limestone, and the Lebanon Limestone. The Bigby-Cannon Limestone and the Carters Limestone are potential aquifers. The Hermitage Formation and the Lebanon Limestone are confining units. The Bigby-Cannon Limestone and the Hermitage Formation have been affected by recent erosion. Any variation of the Carters Limestone is controlled by pre-Carters erosion of the top of the Lebanon Limestone. The thickness of the Carters Limestone ranges from 65 to 79 feet. Structurally, the area reflects the regional northwest dip. A small scale anti-cline-syncline pair also is evident. This feature is not a result of erosion and also occurs in the T-3 bentonite bed in the Carters Limestone.

Tennessee↗
USGS2025

Reduction of red bed sedimentary rocks in connection with energy metal ore formation: A case study from the Sinbad seep, Mesa County, Colorado

The Paradox Basin’s Sinbad seep is a modern analog for ancient bleaching of red bed sediments by introduced alkaline, reducing brines. This bleaching, involving reductive alteration of former red beds, is essential ground preparation that enables the altered rocks to trap Cu, U, and V from later oxidized fluids, forming ore deposits. Study of Sinbad thus offers insights into these metallic mineralization processes in the Paradox and other sedimentary basins. The Sinbad seep occurs where shallow groundwater interacts with organic-rich petroleum source rocks, flows up a fault, and discharges into Salt Creek. Ratios of Na/Cl, Na/Br, and Cl/Br, plus high sulfate concentrations, indicate that the salinity of the seep water originated from dissolution of halite and gypsum during topographically driven flow of meteoric water across a diapir of the Pennsylvanian Paradox Formation, rather than from deep basinal brines. In contact with the organic-rich shales of the Paradox, these SO 4 -rich waters become reduced through bacterial reduction, producing H 2 S. The waters react with red beds of the Permian Cutler Formation, causing pervasive bleaching. The bleaching at Sinbad is characterized by iron-conservative reduction of ferric iron in diagenetic hematite and detrital ilmenite and magnetite to Fe sulfides. The ferrous iron is retained in these sulfides likely as sorbed Fe. Associated alteration includes precipitation of quartz and feldspar overgrowths, partial dissolution of detrital quartz and feldspar caused by pressure solution, formation of clay and authigenic rutile, and precipitation of carbonate and gypsum. The Fe sulfides rapidly degenerate to a mixture of jarosite and iron oxides on weathering at the surface. Among the major-oxide elements and most trace elements, there is no statistical difference between unbleached and bleached samples. The exceptions are uranium and sulfur, which are somewhat greater in bleached samples. Fission track radiography illuminates that uranium is preferentially concentrated in iron oxide cements, iron sorbed into detrital clasts, and finely disseminated iron oxide in illite cement in bleached samples. A leaching experiment suggests that uranium may be more easily available for mobilization from rocks that have undergone bleaching alteration, making them potential U sources. In addition, bleached rocks form effective traps for U, V, and some Cu mineralization.

Colorado↗
USGS2025

An early Holocene wet period in the southwestern United States

Multiple generations of spring-fed streams traversed ∼800 km 2 of the Las Vegas Valley in southern Nevada between ca. 10.9 ka and 8.5 ka, depositing an extensive tufa network. The scale of this network and diversity of tufa morphologies is novel in North America and offers an opportunity to obtain quantitative paleoclimate data for the region during the early Holocene. We determined isotopic compositions and estimated past temperatures using clumped isotope data from early Holocene tufa on the valley floor (698 m) as well as tufa forming today at higher elevation in the nearby Spring Mountains at Cold Creek Spring (1856 m). Modern and fossil tufa yielded comparably low δ 18 O values, implying that source waters for both were derived from high-elevation winter precipitation. Clumped isotope temperatures of modern tufa average 15.8 ± 2.5 °C, aligning with mean summer temperatures of the emergent spring water, and indicate equilibrium conditions of tufa formation. The early Holocene tufa yielded similar clumped isotope temperatures, averaging 15.2 ± 3.9 °C, meaning it precipitated at temperatures that occur at much higher elevations today. The Las Vegas tufa record, combined with nearby and temporally correlative paleospring and lacustrine records, suggest that cool/wet conditions prevailed throughout the Mojave Desert during the early Holocene. These records also demonstrate that spring ecosystems responded to millennial-scale hydroclimate variations that supersede climate change driven solely by insolation. The previously unrecognized pattern of ecosystem response to hydroclimate documented here may assist in understanding climate drivers for the early Holocene and provide critical information for the fate of groundwater-dependent ecosystems in the southwestern United States.

Nevada↗
USGS2026

Estimating aftershock risk for entry into earthquake-damaged buildings

We present a simple method to estimate the risk of experiencing strong shaking from aftershocks during entry into earthquake-damaged buildings. We compute wait times until the probability of strong ground shaking from aftershocks reaches a predefined risk threshold; for example, a 0.4 percent probability of experiencing Modified Mercalli Intensity 7 or greater shaking during the planned building entry. We also develop a relation between aftershock probability and the probability of strong shaking, so that users can reference the U.S. Geological Survey aftershock forecast during an ongoing aftershock sequence to determine if the risk threshold has been met. We apply our method to active continental regions (for example, the Western United States), stable continental regions (for example, the Central and Eastern United States), and subduction zones (for example, Cascadia or Alaska).

Open-File Report↗
USGS2024

Geologic map of Scoggins Dam, Henry Hagg Lake, and Scoggins Valley, Washington County, Oregon

New geologic mapping (Wells and others, 2020b) and geophysical mapping (Blakely and others, 2000; McPhee and others, 2014; Wells and others, 2020a) document kilometers of Cenozoic right-lateral offset along the Gales Creek Fault Zone, a major, northwest-striking fault zone forming the boundary between the Tualatin Valley and the Coast Range. The Bureau of Reclamation’s (Reclamation) Scoggins Dam (fig. 1), in the Coast Range foothills west of Forest Grove, Oregon, lies within the Gales Creek Fault Zone as mapped by Wells and others (2020a, 2020b; fig. 2). Active faults of the Gales Creek Fault Zone defined by paleoseismic trenching (Redwine and others, 2017, 2019b, Horst and others, 2018, 2019, 2021, and Wells and others, 2020a) are presently mapped as projecting through the existing dam. The Pacific Northwest Region of Reclamation requested assistance with geologic studies around Scoggins Dam to provide better understanding of fault locations and their activity, which are needed to design a modification of the dam (Maguire, 2019a, b). The scope of this project includes detailed geology of the existing Scoggins Dam site, Henry Hagg Lake, the reservoir behind the dam, and Scoggins Valley downstream of the existing dam, particularly around a potential new dam site, where Scoggins Creek cuts through a narrow gap formed by a resistant felsic tuff bed that crosses the valley.

Oregon↗
USGS2026

Effect of mineral deposit data on predictions from the three-part approach to quantitative mineral resource assessment—A study of 16 previous U.S. Geological Survey assessments

The three-part approach to quantitative mineral resource assessment requires information about the properties of undiscovered mineral deposits in an assessment area. These properties are unknown, so the properties of discovered mineral deposits of the same mineral deposit type are used instead. In the three-part approach, these discovered mineral deposits come from around the world, and their properties constitute the pooled data for that mineral deposit type. Alternatively, these discovered mineral deposits could come from the assessment area, and their properties constitute the tract data for that mineral deposit type. Tract data may be more representative of the undiscovered mineral deposits in the assessment area than the pooled data. The goal of this study was to determine whether resource predictions using pooled data are equivalent to resource predictions using tract data. To this end, 16 previous U.S Geological Survey assessments were studied. For each assessment, resources were predicted for one undiscovered mineral deposit in the assessment area. One set of predictions used pooled data, and another used tract data. The two sets of predictions were compared with an equivalence test, using the six assessment statistics that are commonly reported for mineral resource assessments. Practical equivalence is the condition that two corresponding assessment statistics are within a factor of 1.5 of one another. For each of 2 assessments, all 6 assessment statistics were practically equivalent. For both assessments, the assessment statistics from the pooled data, relative to the corresponding assessment statistics from the tract data, ranged from 1.30 times smaller to 1.03 times larger. For each of 14 assessments, 1 or more of the 6 assessment statistics were not practically equivalent. The assessment statistics from the pooled data, relative to the corresponding assessment statistics from the tract data, ranged from 26.6 times smaller to 5.53 times larger. The use of pooled data has been a standard procedure in the three-part approach since at least 1986. The 16 assessments in this study are not a representative sample of those prior assessments that used pooled data. So, it is inappropriate to use the study results to infer whether pooled data affected the resource predictions for those prior assessments.

Scientific Investigations Report↗
USGS1997

Chemical evolution and estimated flow velocity of water in the Trinity Aquifer, south-central Texas

Three permeable zones with varying lithology and water chemistry compose the Trinity aquifer, a principal source of water in the 5,500- square-mile study area in south-central Texas. The upper permeable zone locally yields small quantities of water to wells and was not included in this study. The middle permeable zone primarily is composed of limestone with minor amounts of dolostone. Terrigenous sand and marine limestone, with minor amounts of dolostone, are the principal lithologic units in the lower permeable zone. Dissolved solids concentrations range from 329 to 1,820 milligrams per liter in water samples from the middle permeable zone and from 518 to 3,030 milligrams per liter in water samples from the lower permeable zone. Principal hydrochemical facies in the middle permeable zone are calcium magnesium bicarbonate and calcium magnesium sulfate. Hydrochemical facies in ground-water samples from the lower permeable zone vary. Tritium concentrations as large as 5.3 tritium units in the southeastern part of the study area are indicative of relatively recent recharge. Results of a geochemical mass balance simulation along a flowpath in the middle permeable zone indicate a mass transfer of 4.25 millimoles per liter of dolomite dissolved, 5.74 millimoles per liter of gypsum dissolved, 0.46 millimole per liter of sodium chloride dissolved, 8.07 millimoles per liter of calcite precipitated, and 0.67 millimole per liter of calcium-for-sodium cation exchange between solid and aqueous phases. These results support dedolomitization as a principal chemical process in the middle permeable zone of the Trinity aquifer. Results of a simulation along a flowpath in the lower permeable zone indicate a mass transfer of 0.41 millimole per liter of dolomite dissolved, 0.001 millimole per liter of gypsum dissolved, 9.58 millimoles per liter of sodium chloride dissolved, 1.09 millimoles per liter of calcite precipitated, and 1.11 millimoles per liter of sodium-forcalcium cation exchange between solid and aqueous phases. Lower permeable zone processes indicate sodium chloride dissolution, dedolomitization, and cation exchange. Ground-water-flow velocities determined from adjusted carbon-14 ages, calculated using NETPATH, for selected flowpaths in the middle and lower permeable zones were about 1.7 feet per year and less than about 4.4 feet per year, respectively.

Texas↗
USGS2026

Critical minerals in zinc ore—An update on Earth Mapping Resources Initiative Research in the Boulder Batholith region, Montana

Plain Language Summary U.S. Geological Survey research, in collaboration with Montana Technical University and Montana Bureau of Geology and Mines, is providing key critical mineral information that may have potential for critical mineral production of several mining districts in the Boulder Batholith region, to better understand the abundance and distribution of natural resources within this region. Continued research can be used to show the potential for previously undiscovered critical mineral resources in southwestern Montana and in other parts of the United States.

Montana↗
USGS2026

Syn-magmatic subsidence during the early stages of continental rifting in the Mesoproterozoic—A reanalysis of legacy data for the Midcontinent Rift, western Lake Superior

The Midcontinent Rift system (ca. 1.1 Ga) is a 2000-km-long series of elongated volcanic and sedimentary troughs and associated intrusive centers exposed chiefly in the Lake Superior region of North America. The rift system represents a long history of intense magmatism and subsequent sedimentation that was arrested by far-field tectonic events before sea-floor spreading was established. The premature cessation preserved a record of processes related to the beginning of continental rifting. The rift system under Lake Superior has been long studied using seismic-reflection data collected as part of the Great Lakes International Multidisciplinary Program on Crustal Evolution (GLIMPCE). We reexamine GLIMPCE Line C by developing a detailed velocity model for time to depth conversion constrained by other legacy data. We corroborate the model and develop a geologic interpretation using gravity and magnetic modeling and ties to geology mapped onshore. We recognize superposed subsiding sedimentary and volcanic basins for the southern half of the Line C depth section. This interpretation differs from previous paradigms that show major crustal faults that bound half-grabens or full grabens. We conclude that high-velocity (6.9 km/s) intrusive zones rather than major crustal faults border the sides of the basins. We speculate that the volcanic basin represents the initiation of seaward dipping reflectors. The syn-magmatic subsidence can be explained by dike injection and volcanic loading. Discrete lava basins throughout the region likely subsided at different times in a disorganized manner along the rift trend, raising questions about the long-term role of lithospheric thinning and melt generation.

Michigan, Minnesota, Ontario, Wisconsin↗
USGS2025

U.S. Geological Survey Groundwater Climate Response Network, 2024

As of October 2024, the U.S. Geological Survey (USGS) operated 588 sites across the United States and its territories as part of the Groundwater Climate Response Network (CRN). The CRN is comprised of wells selected to monitor the effects of climate variability, such as droughts, on groundwater levels nationwide. The CRN includes nearly 500 locations with real-time data and more than 100 sites with non-real-time data available to the public on the CRN web mapper and the USGS National Water Dashboard.

General Information Product↗
USGS2025

False positives in the identification of dynamic earthquake triggering

Dynamic earthquake triggering is commonly identified through the temporal correlation between increased seismicity rates and global earthquakes that are possible triggering events. However, correlation does not imply causation. False positives may occur when unrelated seismicity rate changes coincidently occur at around the time of candidate triggers. We investigate the expected false positive rate in Southern California with global M ≥ 6 earthquakes as candidate triggers. We compute the false positive rate by applying the statistical tests used by DeSalvio and Fan (2023), https://doi.org/10.1029/2023jb026487 to synthetic earthquake catalogs with no real dynamic triggering. We find a false positive rate of ∼3.5%–8.5% when realistic earthquake clustering is present, consistent with the 95% confidence typically used in seismology. However, when this false positive rate is applied to the tens of thousands of spatial-temporal windows in Southern California tested in DeSalvio and Fan (2023), https://doi.org/10.1029/2023jb026487 , thousands of false positives are expected. The expected false positive occurrence is large enough to explain the observed apparent triggering following 70% of large global earthquakes (DeSalvio & Fan, 2023, https://doi.org/10.1029/2023jb026487 ), without requiring any true dynamic triggering. Aside from the known triggering from the nearby El Mayor-Cucapah, Mexico, earthquake, the spatial and temporal characteristics of the reported triggering are indistinguishable from random false positives. This implies that best practice for dynamic triggering studies that depend on temporal correlation is to estimate the false positive rate and investigate whether the observed apparent triggering is distinguishable from the correlations that may occur by chance.

JGR Solid Earth↗
USGS2025

The Mammoth magnetic anomaly, Pinal County, Arizona

A high-resolution Earth Mapping Resources Initiative airborne geophysical survey was flown in the southwest North American porphyry copper province to improve bedrock geologic maps and to identify areas that have unrecognized critical mineral resource potential. During the review of the aeromagnetic data, a distinctly monopolar-shaped, negative magnetic anomaly was observed at a flight elevation of 200 m above the ground with a maximum amplitude of –9500 nT. We have named this the Mammoth magnetic anomaly (MMA) because it is centered 12 km northeast of the town of Mammoth, Arizona, USA. The total field anomaly (TFA) contour of –500 nT enclosing the MMA defines an elongate shape measuring 2.5 km long by 1 km wide that trends northwest–southeast. Given the striking nature of this negative, monopolar-shaped magnetic anomaly, we conducted a ground campaign in May 2025 to determine its authenticity and potential relationship to critical mineral endowment. The MMA was confirmed on the ground with a TFA approaching –46,000 nT. Total magnetic intensity (TMI) observations routinely fell below the 18,000 nT operating floor of an industry-standard cesium-vapor total field magnetometer, and extremely low TMI measurements were corroborated along coincident traverse lines using two high dynamic range, but lower sensitivity, smartphone vector magnetometers. The lowest TMI values recorded by both smartphone magnetometers were 1000 nT and confirmed with multiple adjacent and crossing lines. Field observations suggest that this magnetic feature is caused by strong remanent magnetization within fine-grained magnetite hosted within locally altered Pinal Schist.

Arizona↗
USGS2026

New constraints on northeast Seattle basin structure from converted seismic waves

The Seattle basin is a deep sedimentary basin in the Seattle–Bellevue, Washington metropolitan area within the Puget Lowland of Washington State. We determine the structure of a portion of the basin and the underlying basement using analysis of P waves converted from direct S incident from below. A deep local crustal event beneath Monroe, about 35 km northeast of Seattle, was recorded by a 100‐station nodal array deployed in 2019. The event produced a variety of coherent seismic phases, including converted waves from the sediment—basement boundary, internal structure within the basin, and additional crustal discontinuities. Using observed Sp converted waves, we apply an adjoint‐based full waveform inversion (FWI) method to determine the amplitude and extent of seismic discontinuities at depth. We find the strongest source of converted waves for this event lies ∼6 to 7 km depth below northern Lake Washington, interpreted to be the local depth to basement rock. The newly imaged shallow basement structure may be part of a deformation zone associated with the Siletzia eastern boundary. Our results highlight the utility of converted seismic waves recorded by a dense array, combined with an FWI method, to illuminate crustal structure.

Washington↗
USGS2026

A case study of maximum depositional ages from terrestrial sandstones near the Cretaceous—Paleogene transition, western Williston Basin, USA

We present a new Bayesian method for deriving maximum depositional ages from detrital K-feldspar using total-fusion 40 Ar/ 39 Ar data. Individual analyses weighted by K/Ca ratio, age uncertainty, and percent radiogenic argon prioritize a result to come from accurately measured volcanic sources. Results from this method applied to sandstones from the Hell Creek region of northeastern Montana show that detrital K-feldspar maximum depositional ages align closely with detrital U-Pb zircon ages as well as tephra based chronostratigraphic constraints from both 40 Ar/ 39 Ar and U-Pb data. An age model informed by maximum depositional ages and available tephra data provides an estimate of 1.74 ± 1.04 Ma for the duration of deposition for the Hell Creek Formation. Combined age model and maximum depositional age data suggest ≤ 1.84 Ma of missing time is represented by the Hell Creek and Fox Hills formational disconformity, coinciding with the final regression of the Western Interior seaway.

Montana↗