USGS Science⌕ Search

SEARCH · USGS Science

Results for “Rock Products”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,369 records · Page 76Linked to original sources
USGS2000

Altitude of the top of the Inyan Kara Group in the Black Hills area, South Dakota

This map is a product of the Black Hills Hydrology Study, which was initiated in 1990 to assess the quantity, quality, and distribution of surface water and ground water in the Black Hills area of South Dakota (Driscoll, 1992). This long-term study is a cooperative effort between the U.S. Geological Survey (USGS), the South Dakota Department of Environment and Natural Resources, and the West Dakota Water Development District, which represents various local and county cooperators. This map is part of a series of 1:100,000-scale maps for the study. The maps include a hydrogeologic map, structure-contour maps (altitudes of the tops of formations) for five formations that contain major aquifers in the study area, and potentiometric maps for these five major aquifers (the Inyan Kara, Minnekahta, Minnelusa, Madison, and Deadwood aquifers). The study area consists of the topographically defined Black Hills and adjacent areas located in western South Dakota. The Black Hills area is an elongated, dome-shaped feature, about 125 miles long and 60 miles wide, which was uplifted during the Laramide orogeny (Feldman and Heimlich, 1980). The oldest geologic units in the study area are Precambrian metamorphic and igneous rocks, which are exposed in the central core of the Black Hills. Surrounding the Precambrian core is a layered series of sedimentary rocks including limestones, sandstones, and shales that are exposed in roughly concentric rings around the uplifted flanks of the Black Hills. The bedrock sedimentary units typically dip away from the uplifted Black Hills at angles that approach or exceed 10 degrees near the outcrops, and decrease with distance from the uplift. Many of the sedimentary units contain aquifers, both within and beyond the study area. Recharge to these aquifers occurs from infiltration of precipitation upon the outcrops and, in some cases, from infiltration of streamflow (Hortness and Driscoll, 1998). Artesian conditions generally exist within these aquifers where an upper confining layer is present. Flowing wells and artesian springs that originate from confined aquifers are common around the periphery of the Black Hills. The purpose of this map is to show the altitude of the top (structure contours) of the Inyan Kara Group within the area of the Black Hills Hydrology Study. The depth to the top of the Inyan Kara Group can be estimated at a specific site by subtracting the altitude of the top of the formation from the topographic elevation. However, caution is urged in determining the depth to the top of the formation in areas on the map where the contours are approximately located.

Hydrologic Atlas↗
USGS2000

Altitude of the Top of the Minnelusa Formation in the Black Hills area, South Dakota, 1999

This map is a product of the Black Hills Hydrology Study, which was initiated in 1990 to assess the quantity, quality, and distribution of surface water and ground water in the Black Hills area of South Dakota (Driscoll, 1992). This long-term study is a cooperative effort between the U.S. Geological Survey (USGS), the South Dakota Department of Environment and Natural Resources, and the West Dakota Water Development District, which represents various local and county cooperators. This map is part of a series of 1:100,000-scale maps for the study. The maps include a hydrogeologic map, structure-contour maps (altitudes of the tops of formations) for five formations that contain major aquifers in the study area, and potentiometric maps for these five major aquifers (the Inyan Kara, Minnekahta, Minnelusa, Madison, and Deadwood aquifers). The study area consists of the topographically defined Black Hills and adjacent areas located in western South Dakota. The Black Hills area is an elongated, dome-shaped feature, about 125 miles long and 60 miles wide, which was uplifted during the Laramide orogeny (Feldman and Heimlich, 1980). The oldest geologic units in the study area are Precambrian metamorphic and igneous rocks, which are exposed in the central core of the Black Hills. Surrounding the Precambrian core is a layered series of sedimentary rocks including limestones, sandstones, and shales that are exposed in roughly concentric rings around the uplifted flanks of the Black Hills. The bedrock sedimentary units typically dip away from the uplifted Black Hills at angles that approach or exceed 10 degrees near the outcrops, and decrease with distance from the uplift. Many of the sedimentary units contain aquifers, both within and beyond the study area. Recharge to these aquifers occurs from infiltration of precipitation upon the outcrops and, in some cases, from infiltration of streamflow (Hortness and Driscoll, 1998). Artesian conditions generally exist within these aquifers where an upper confining layer is present. Flowing wells and artesian springs that originate from confined aquifers are common around the periphery of the Black Hills. The purpose of this map is to show the altitude of the top (structure contours) of the Minnelusa Formation within the area of the Black Hills Hydrology Study. The depth to the top of the Minnelusa Formation can be estimated at a specific site by subtracting the altitude of the top of the formation from the topographic elevation. However, caution is urged in determining the depth to the top of the formation in areas on the map where the contours are approximately located.

Hydrologic Atlas↗
USGS1999

Altitude of the top of the Deadwood Formation in the Black Hills area, South Dakota

This map is a product of the Black Hills Hydrology Study, which was initiated in 1990 to assess the quantity, quality, and distribution of surface water and ground water in the Black Hills area of South Dakota (Driscoll, 1992). This long-term study is a cooperative effort between the U.S. Geological Survey (USGS), the South Dakota Department of Environment and Natural Resources, and the West Dakota Water Development District, which represents various local and county cooperators. This map is part of a series of 1:100,000-scale maps for the study. The maps include a hydrogeologic map, structure-contour maps (altitudes of the tops of formations) for five formations that contain major aquifers in the study area, and potentiometric maps for these five major aquifers (the Inyan Kara, Minnekahta, Minnelusa, Madison, and Deadwood aquifers). The study area consists of the topographically defined Black Hills and adjacent areas located in western South Dakota. The Black Hills area is an elongated, dome-shaped feature, about 125 miles long and 60 miles wide, which was uplifted during the Laramide orogeny (Feldman and Heimlich, 1980). The oldest geologic units in the study area are Precambrian metamorphic and igneous rocks, which are exposed in the central core of the Black Hills. Surrounding the Precambrian core is a layered series of sedimentary rocks including limestones, sandstones, and shales that are exposed in roughly concentric rings around the uplifted flanks of the Black Hills. The bedrock sedimentary units typically dip away from the uplifted Black Hills at angles that approach or exceed 10 degrees near the outcrops, and decrease with distance from the uplift. Many of the sedimentary units contain aquifers, both within and beyond the study area. Recharge to these aquifers occurs from infiltration of precipitation upon the outcrops and, in some cases, from infiltration of streamflow (Hortness and Driscoll, 1998). Artesian conditions generally exist within these aquifers where an upper confining layer is present. Flowing wells and artesian springs that originate from confined aquifers are common around the periphery of the Black Hills. The purpose of this map is to show the altitude of the top (structure contours) of the Deadwood Formation within the area of the Black Hills Hydrology Study. The depth to the top of the Deadwood Formation can be estimated at a specific site by subtracting the altitude of the top of the formation from the topographic elevation, However, caution is urged in determining the depth to the top of the formation in areas on the map where the contours are approximately located.

South Dakota↗
USGS2000

Potentiometric surface of the Inyan Kara Aquifer in the Black Hills area, South Dakota

This map is a product of the Black Hills Hydrology Study, which was initiated in 1990 to assess the quantity, quality, and distribution of surface water and ground water in the Black Hills area of South Dakota (Driscoll, 1992). This long-term study is a cooperative effort between the U.S. Geological Survey (USGS), the South Dakota Department of Environment and Natural Resources, and the West Dakota Water Development District, which represents various local and county cooperators. This map is part of a series of 1:100,000-scale maps for the study. The maps include a hydrogeologic map, structure-contour maps (altitudes of the tops of formations) for five formations that contain major aquifers in the study area, and potentiometric maps for these five major aquifers (the Inyan Kara, Minnekahta, Minnelusa, Madison, and Deadwood aquifers). The study area consists of the topographically defined Black Hills and adjacent areas located in western South Dakota. The Black Hills area is an elongated, dome-shaped feature, about 125 miles long and 60 miles wide, which was uplifted during the Laramide orogeny (Feldman and Heimlich, 1980). The oldest geologic units in the study area are Precambrian metamorphic and igneous rocks, which are exposed in the central core of the Black Hills. Surrounding the Precambrian core is a layered series of sedimentary rocks including limestones, sandstones, and shales that are exposed in roughly concentric rings around the uplifted flanks of the Black Hills. The bedrock sedimentary units typically dip away from the uplifted Black Hills at angles that approach or exceed 10 degrees near the outcrops, and decrease with distance from the uplift. Many of the sedimentary units contain aquifers, both within and beyond the study area. Recharge to these aquifers occurs from infiltration of precipitation upon the outcrops and, in some cases, from infiltration of streamflow (Hortness and Driscoll, 1998). Artesian conditions generally exist within these aquifers where an upper confining layer is present. Flowing wells and springs that originate from the confined aquifers are common around the periphery of the Black Hills. The purpose of this map is to show the potentiometric surface of the Inyan Kara aquifer within the study area. The map provides a tool for evaluating ground-water flow directions and hydraulic gradients in the Inyan Kara aquifer.

Hydrologic Atlas↗
USGS2000

Potentiometric surface of the Minnekahta Aquifer in the Black Hills area, South Dakota

This map is a product of the Black Hills Hydrology Study, which was initiated in 1990 to assess the quantity, quality, and distribution of surface water and ground water in the Black Hills area of South Dakota (Driscoll, 1992). This long-term study is a cooperative effort between the U.S. Geological Survey (USGS), the South Dakota Department of Environment and Natural Resources, and the West Dakota Water Development District, which represents various local and county cooperators. This map is part of a series of 1:100,000-scale maps for the study. The maps include a hydrogeologic map, structure-contour maps (altitudes of the tops of formations) for five formations that contain major aquifers in the study area, and potentiometric maps for these five major aquifers (the Inyan Kara, Minnekahta, Minnelusa, Madison, and Deadwood aquifers). The study area consists of the topographically defined Black Hills and adjacent areas located in western South Dakota. The Black Hills area is an elongated, dome-shaped feature, about 125 miles long and 60 miles wide, which was uplifted during the Laramide orogeny (Feldman and Heimlich, 1980). The oldest geologic units in the study area are Precambrian metamorphic and igneous rocks, which are exposed in the central core of the Black Hills. Surrounding the Precambrian core is a layered series of sedimentary rocks including limestones, sandstones, and shales that are exposed in roughly concentric rings around the uplifted flanks of the Black Hills. The bedrock sedimentary units typically dip away from the uplifted Black Hills at angles that approach or exceed 10 degrees near the outcrops, and decrease with distance from the uplift. Many of the sedimentary units contain aquifers, both within and beyond the study area. Recharge to these aquifers occurs from infiltration of precipitation upon the outcrops and, in some cases, from infiltration of streamflow (Hortness and Driscoll, 1998). Artesian conditions generally exist within these aquifers where an upper confining layer is present. Flowing wells and springs that originate from the confined aquifers are common around the periphery of the Black Hills. The purpose of this map is to show the potentiometric surface of the Minnekahta aquifer within the study area. The map provides a tool for evaluating ground-water flow directions and hydraulic gradients in the Minnekahta aquifer.

Hydrologic Atlas↗
USGS2000

Potentiometric surface of the Minnelusa Aquifer in the Black Hills area, South Dakota

This map is a product of the Black Hills Hydrology Study, which was initiated in 1990 to assess the quantity, quality, and distribution of surface water and ground water in the Black Hills area of South Dakota (Driscoll, 1992). This long-term study is a cooperative effort between the U.S. Geological Survey (USGS), the South Dakota Department of Environment and Natural Resources, and the West Dakota Water Development District, which represents various local and county cooperators. This map is part of a series of 1:100,000-scale maps for the study. The maps include a hydrogeologic map, structure-contour maps (altitudes of the tops of formations) for five formations that contain major aquifers in the study area, and potentiometric maps for these five major aquifers (the Inyan Kara, Minnekahta, Minnelusa, Madison, and Deadwood aquifers). The study area consists of the topographically defined Black Hills and adjacent areas located in western South Dakota. The Black Hills area is an elongated, dome-shaped feature, about 125 miles long and 60 miles wide, which was uplifted during the Laramide orogeny (Feldman and Heimlich, 1980). The oldest geologic units in the study area are Precambrian metamorphic and igneous rocks, which are exposed in the central core of the Black Hills. Surrounding the Precambrian core is a layered series of sedimentary rocks including limestones, sandstones, and shales that are exposed in roughly concentric rings around the uplifted flanks of the Black Hills. The bedrock sedimentary units typically dip away from the uplifted Black Hills at angles that approach or exceed 10 degrees near the outcrops, and decrease with distance from the uplift. Many of the sedimentary units contain aquifers, both within and beyond the study area. Recharge to these aquifers occurs from infiltration of precipitation upon the outcrops and, in some cases, from infiltration of streamflow (Hortness and Driscoll, 1998). Artesian conditions generally exist within these aquifers where an upper confining layer is present. Flowing wells and springs that originate from the confined aquifers are common around the periphery of the Black Hills. The purpose of this map is to show the potentiometric surface of the Minnelusa aquifer within the study area. The map provides a tool for evaluating ground-water flow directions and hydraulic gradients in the Minnelusa aquifer.

Hydrologic Atlas↗
USGS2000

Potentiometric surface of the Madison Aquifer in the Black Hills area, South Dakota

This map is a product of the Black Hills Hydrology Study, which was initiated in 1990 to assess the quantity, quality, and distribution of surface water and ground water in the Black Hills area of South Dakota (Driscoll, 1992). This long-term study is a cooperative effort between the U.S. Geological Survey (USGS), the South Dakota Department of Environment and Natural Resources, and the West Dakota Water Development District, which represents various local and county cooperators. This map is part of a series of 1:100,000-scale maps for the study. The maps include a hydrogeologic map, structure-contour maps (altitudes of the tops of formations) for five formations that contain major aquifers in the study area, and potentiometric maps for these five major aquifers (the Inyan Kara, Minnekahta, Minnelusa, Madison, and Deadwood aquifers). The study area consists of the topographically defined Black Hills and adjacent areas located in western South Dakota. The Black Hills area is an elongated, dome-shaped feature, about 125 miles long and 60 miles wide, which was uplifted during the Laramide orogeny (Feldman and Heimlich, 1980). The oldest geologic units in the study area are Precambrian metamorphic and igneous rocks, which are exposed in the central core of the Black Hills. Surrounding the Precambrian core is a layered series of sedimentary rocks including limestones, sandstones, and shales that are exposed in roughly concentric rings around the uplifted flanks of the Black Hills. The bedrock sedimentary units typically dip away from the uplifted Black Hills at angles that approach or exceed 10 degrees near the outcrops, and decrease with distance from the uplift. Many of the sedimentary units contain aquifers, both within and beyond the study area. Recharge to these aquifers occurs from infiltration of precipitation upon the outcrops and, in some cases, from infiltration of streamflow (Hortness and Driscoll, 1998). Artesian conditions generally exist within these aquifers where an upper confining layer is present. Flowing wells and springs that originate from the confined aquifers are common around the periphery of the Black Hills. The purpose of this map is to show the potentiometric surface of the Madison aquifer within the study area. The map provides a tool for evaluating ground-water flow directions and hydraulic gradients in the Madison aquifer.

Hydrologic Atlas↗
USGS2000

Potentiometric surface of the Deadwood Aquifer in the Black Hills area, South Dakota

This map is a product of the Black Hills Hydrology Study, which was initiated in 1990 to assess the quantity, quality, and distribution of surface water and ground water in the Black Hills area of South Dakota (Driscoll, 1992). This long-term study is a cooperative effort between the U.S. Geological Survey (USGS), the South Dakota Department of Environment and Natural Resources, and the West Dakota Water Development District, which represents various local and county cooperators. This map is part of a series of 1:100,000-scale maps for the study. The maps include a hydrogeologic map, structure-contour maps (altitudes of the tops of formations) for five formations that contain major aquifers in the study area, and potentiometric maps for these five major aquifers (the Inyan Kara, Minnekahta, Minnelusa, Madison, and Deadwood aquifers). The study area consists of the topographically defined Black Hills and adjacent areas located in western South Dakota. The Black Hills area is an elongated, dome-shaped feature, about 125 miles long and 60 miles wide, which was uplifted during the Laramide orogeny (Feldman and Heimlich, 1980). The oldest geologic units in the study area are Precambrian metamorphic and igneous rocks, which are exposed in the central core of the Black Hills. Surrounding the Precambrian core is a layered series of sedimentary rocks including limestones, sandstones, and shales that are exposed in roughly concentric rings around the uplifted flanks of the Black Hills. The bedrock sedimentary units typically dip away from the uplifted Black Hills at angles that approach or exceed 10 degrees near the outcrops, and decrease with distance from the uplift. Many of the sedimentary units contain aquifers, both within and beyond the study area. Recharge to these aquifers occurs from infiltration of precipitation upon the outcrops and, in some cases, from infiltration of streamflow (Hortness and Driscoll, 1998). Artesian conditions generally exist within these aquifers where an upper confining layer is present. Flowing wells and springs that originate from the confined aquifers are common around the periphery of the Black Hills. The purpose of this map is to show the potentiometric surface of the Deadwood aquifer within the study area. The map provides a tool for evaluating ground-water flow directions and hydraulic gradients in the Deadwood aquifer.

Hydrologic Atlas↗
USGS1994

Characteristics of streams and aquifers and processes affecting the salinity of water in the upper Colorado River basin, Texas

The upper Colorado River and some of its tributaries between Lake J.B. Thomas and O.H. Ivie Reservoir contain saline water (defined as water having dissolved-solids concentrations greater than 1,000 milligrams per liter). Dissolved-solids loads at nine streamflow water-quality stations increased from 1986 to 1988. The largest increases were in Beals Creek and in the Colorado River downstream from Beals Creek as a result of outflow of saline water from Natural Dam Salt Lake. The outflow contained 654,000 tons of dissolved solids and had a mean dissolved-solids concentration of 7,900 milligrams per liter. This amount represents about 51 percent of the dissolved-solids load to E.V. Spence Reservoir during 1986-88. The concentration of dissolved solids in streamflow in the upper Colorado River, however, generally decreased in the downstream direction as flows increased in all reaches of the river and its tributaries. Diversion of low flows at a site on the Colorado River upstream from the E.V. Spence and O.H. Ivie Reservoirs decreased the dissolved-solids concentrations of inflow to the reservoirs by about 7 percent while removing only about 3 percent of the total flow. The estimated dissolved-solids concentration exceeded 1,000 milligrams per liter for water from about 233 of 386 wells and springs for which specific conductance was measured in 1986. The mean value of the estimated dissolved-solids concentration for water from the 386 wells and springs was about 1,750 milligrams per liter. Some of the dissolved-solids content of streamflow and shallow-aquifer water was attributed to evapotranspiration in areas where water was close to land surface, in irrigated areas, and along streams. The evapotranspiration was largely from phreatophytes and was comparable to the mean streamflow from the study area during 1969- 86. However, evapotranspiration was not considered to have an effect on the salinity of water in shallow aquifers on a regional scale. Dissolution of sulfur-bearing minerals such as gypsum and pyrite in shallow aquifers contributed to salinity because of their presence in soil and shallowaquifer formations. Mixing with brine associated with oil and gas production is a major process affecting the salinity of streamflow and shallow-aquifer water. Brines can move upward through the more than 20,000 abandoned oil- and gas-related boreholes, most of which were abandoned prior to current requirements for casing, cementing, and plugging. Leakage from pits, disposal wells, and secondary-recovery wells, which have been used to dispose of brine, a by-product of oil and gas production, also contributed to dissolved solids in streamflow and shallow-aquifer water. The ratio of brine production to oil production in the seven major oil-producing counties increased from 0.60 to 6.5 between 1957 and 1983. About 359 million barrels of brine were injected into oil-producing formations through secondary-recovery wells in 1983, compared to 11 million barrels through disposal wells. The chemical characteristics of the saline water in streams and shallow aquifers in the study area were compared to characteristics of water that would result from the probable processes affecting the salinity of water, such as evapotranspiration, mineral dissolution, and mixing of water from streams and shallow-aquifer water with brines from deep aquifers. Dissolution of halite or mixing with deep-aquifer water was the most common cause of increased salinity in 48.0 percent of 77 water samples from shallow aquifers, as classified using salt-norm analysis; the second most common cause was the weathering and dissolution of sulfur-bearing minerals. Mixing with water from soil-mineral dissolution was classified as the principal source of chloride in 28.4 percent of 67 water samples from shallow aquifers with nitrate determinations. Trace-species/chloride ratios indicated that mixing with water from deep aquifers in rocks of the Pennsylvanian System was the principal source of chloride in 24.4 percent of 45 shallow-aquifer samples lacking nitrate determinations.

Texas↗
USGS1974

Effects of metal-mine drainage on water quality in selected areas of Colorado, 1972-73

Colorado is a child of mining. In the past, towns such as Cripple Creek, Leadville, Creede, and many others were the lifeblood of the economy. While metal mining is still economically important to Colorado, another legacy of this past activity is attracting increasing attention—the detrimental effects of drainage from abandoned and active mines and tailings piles (waste rock piles) on streams. Concern with metal-mine drainage is due to the acid resulting from oxidation of pyritic material. The acid itself can be harmful to aquatic organisms, and can make the water unusable for various recreational and industrial needs. Just as importantly, however, the acid dissolves metals from ores and tailings piles and releases them into the streams. Many of the metals are toxic to aquatic organisms, humans, and livestock; and, like excess acidity, the metals can make streams unusable for some types of recreation and industry. In July 1971, a study of the effects of both metal- and coal-mine drainage on surface-water quality in Colorado was undertaken by the U.S. Geological Survey in cooperation with the Colorado Water Pollution Control Commission. Based on the reconnaissance phase of this project (Wentz, 1974), 17 areas judged to be adversely affected by metal-mine drainage were chosen for further study. One additional area was included because it is the only place found in Colorado that potentially could be affected by coal-mine drainage. The present report summarizes the intensive study of these areas; it is the second product of the mine-drainage study. The first report was published as Colorado Water Resources Circular 21.

Colorado↗
USGS2017

Constraining the thermal history of the North American Midcontinent Rift System using carbonate clumped isotopes and organic thermal maturity indices

The Midcontinent Rift System (MRS) is a Late Mesoproterozoic (∼1.1 Ga) sequence of volcanic and sedimentary rocks exposed in the Lake Superior Region of North America. The MRS continues to be the focus of much research due to its economic mineral deposits as well as its archive of Precambrian life and tectonic processes. In order to constrain the post-depositional thermal history of the MRS, samples were analyzed for carbonate clumped isotope composition and organic thermal maturity. Clumped isotope values from sedimentary/early-diagenetic samples were partially reset during burial to temperatures between 68 and 75 °C. Solid-state reordering models indicate that maximum burial temperatures of 125–155 °C would reset the clumped isotope values to the observed temperature range prior to the onset of regional cooling and uplift. Clumped isotope results from late-stage veins in the White Pine Mine encompass a greater temperature range (49–116 °C), indicative of spatially variable hydrothermal activity and vein emplacement after burial temperatures fell below 100 °C during regional cooling and uplift. Clumped isotope and organic thermal maturity data do not indicate significant spatial differences in thermal history along the MRS. Observed variability in bulk organic matter composition and biomarker indices are therefore more likely a result of shifts in primary productivity or early-degradation processes. These results demonstrate that the MRS experienced a spatially consistent, relatively mild thermal history (125–155 °C) and is therefore a valuable archive for understanding the Late Mesoproterozoic environment.

Lake Superior↗
USGS2012

Stratigraphic, lithologic, and major element geochemical constraints on magmatic evolution at Lassen volcanic center, California

The Lassen volcanic center is the most recent of several long-lived volcanic centers in the southernmost Cascade Range. These centers have erupted products ranging from basaltic andesite to rhyolite and are superimposed on a background of regional basaltic to andesitic volcanism. The evolution of the Lassen volcanic center is described in three stages. Stages I and II comprise the Brokeoff volcano, and 80 km 3 andesitic stratocone, active from 600 to 400 ka. Brokeoff volcano is compositionally equivalent to the regional basaltic andesite to andesite volcanism in the Lassen region and is the result of structurally controlled focusing of the diffuse regional mafic magmatism. Stage III comprises a silicic dome field and adjacent area of hybrid andesites and has a total volume of about 100 km 3 . Volcanism during stage III was episodic and is subdivided into four sequences of lithologically and temporally distinct lavas. Stage III began at 400 ka with a rhyolitic, caldera-forming pyroclastic eruption and chemically related lavas. Additional sequences of dacite erupted between 250–200 ka and 100–0 ka. Hybrid andesites erupted adjacent to the silicic dome field between 300 and 0 ka. Porphyritic andesite and dacite with high Al 2 O 3 , low TiO 2 , medium K 2 O and FeO/MgO ratios of 1.5–2.0 are the most abundant rock types in the Lassen volcanic center. However, the single most voluminous unit is sparsely phyric rhyolite pumice. In general, the lavas of Lassen volcanic center form a single coherent trend on major element variation diagrams and in pseudo-quaternary phase space, consistant with an origin either by fractional crystallization or magma mixing. In detail, however, the lack of systematic temporal change in silica and subtly crossing trends indicate a complex origin. A variety of statistically successful fractional crystallization models can be constructed that derive Brokeoff andesites from regional magmas. An important conclusion of the modeling is that if fractional crystallization is the process responsible for generation of Brokeoff andesite, then the parent magma must be low to medium K in geochemical affinity in order to explain the variation in K 2 O. However, although major element variation can be modeled by fractional crystallization, petrographic and stratigraphic evidence indicates that magma mixing is an important but subtle process in Brokeoff lavas and suggests that lavas evolved in small independent batches. Lavas erupted during stage III, while predominantly silicic, range from 53 to 75% SiO 2 . Disequilibrium mineral assemblages in the stage III lavas indicate that they are not directly derived from Brokeoff andesite by fractional crystallization. Mixing of silicic magma with regional mafic magma and disaggregation of andesitic quenched magmatic inclusions play dominant roles in the compositional diversity of stage III lavas.

Journal of Geophysical Research Solid Earth↗
USGS2018

Global Earthquake Model (GEM) Risk Map

The Global Earthquake Risk Map (v2018.1) comprises four global maps. The main map presents the geographic distribution of average annual loss (USD) normalized by the average construction costs of the respective country (USD/m2 due to ground shaking in the residential, commercial and industrial building stock, considering contents, structural and non-structural components. The normalized metric allows a direct comparison of the risk between countries with widely different construction costs. It does not consider the effects of tsunamis, liquefaction, landslides, and fires following earthquakes. The loss estimates are from direct physical damage to buildings due to shaking, and thus damage to infrastructure or indirect losses due to business interruption are not included. The Global Earthquake Hazard Map depicts the geographic distribution of the Peak Ground Acceleration (PGA) with a 10% probability of being exceeded in 50 years, computed for reference rock conditions (shear wave velocity of 760-800 m/s). The Global Exposure Map depicts the geographic distribution of residential, commercial and industrial buildings. The Global Seismic Fatalities Map depicts an estimate of average annual human losses due to earthquake-induced structural collapse of buildings. The results for human losses do not consider indirect fatalities such as those from post­ earthquake epidemics. The average annual losses and number of buildings are presented on a hexagonal grid, with a spacing of 0.30 x 0.34 decimal degrees (approximately 1,000 km2 at the equator). The average annual losses were computed using the event-based calculator of the OpenQuake engine, an open-source software for seismic hazard and risk analysis developed by the GEM Foundation. The seismic hazard, exposure and vulnerability models employed in these calculations were provided by national institutions, or developed within the scope of regional programs or bilateral collaborations. These global maps and the underlying databases are based on best available and publicly accessible datasets and models. Due to possible limitations in the model, regions portrayed with low risk may experience potentially damaging earthquakes. The GEM Risk Map is intended to be a dynamic product, which will be updated when new datasets and models become available. Updated versions of the hazard, exposure, and average annual losses will be released on a regular basis. Additional metrics for each country can be explored at globalquakemodel.org/gem.

Report↗
USGS1999

Distribution of hydrogeologic units in the Black Hills area, South Dakota

This report is a product of the Black Hills Hydrology Study, which was initiated in 1990 to assess the quantity, quality, and distribution of surface water and ground water in the Black Hills area of South Dakota (Driscoll, 1992). This long-term study is a cooperative effort between the U.S. Geological Survey (USGS), the South Dakota Department of Environment and Natural Resources, and the West Dakota Water Development District, which represents various local and county cooperators. The map in this report is part of a series of 1:100,000-scale maps that are being produced for the study. Other maps include structure-contour maps (altitudes of the tops of formations) for five formations that contain major aquifers in the study area, and potentiometric maps for these five major aquifers (the Inyan Kara, Minnekahta, Minnelusa, Madison, and Deadwood aquifers). The study area consists of the topographically defined Black Hills and adjacent areas located in western South Dakota. The Black Hills area is an elongated, dome-shaped feature, about 125 miles long and 60 miles wide, which was uplifted during the Laramide orogeny (Feldman and Heimlich, 1980). The oldest geologic units in the study area are Precambrian metamorphic and igneous rocks, which are exposed in the central core of the Black Hills. Surrounding the Precambrian core is a layered series of sedimentary rocks including limestones, sandstones, and shales that are exposed in roughly concentric rings around the uplifted flanks of the Black Hills. The bedrock sedimentary units typically dip away from the uplifted Black Hills at angles that approach or exceed 10 degrees near the outcrops, and decrease with distance from the uplift. Many of the sedimentary units contain aquifers, both within and beyond the study area. Recharge to these aquifers occurs from infiltration of precipitation upon the outcrops and, in some cases, from infiltration of streamflow (Hortness and Driscoll, 1998). Artesian conditions generally exist within these aquifers where an upper confining layer is present. Flowing wells and artesian springs that originate from confined aquifers are common around the periphery of the Black Hills.

Hydrologic Atlas↗
USGS1953

Ground-water conditions in the Milwaukee-Waukesha area, Wisconsin

Three major aquifers underlie the Milwaukee-Waukesha area: sandstones of Cambrian and Ordovician age, Niagara dolomite of Silurian age, and sand and gravel deposits of Pleistocene age. The Maquoketa shale of Ordovician age acts as a more or less effective seal between the Pleistocene deposits and Niagara dolomite above and the sandstone aquifer below. Crystalline rocks of pre-Cambrian age form an impermeable basement complex below the Paleozoic sedimentary rocks. The Paleozoic strata dip east at 25 to 30 feet to the mile. There is no evidence that any of the faults and folds known or surmised to be present acts as a barrier to the movement of ground water. The bedrock surface underlying the Milwaukee-Waukesha area is formed by the Niagara dolomite except in northeastern Milwaukee County, where it is dolomite and shale of the Milwaukee formation of Devonian age, and in some of the preglacial valleys where the uppermost bedrock formation is the Maquoketa shale. Unconsolidated deposits of glacial drift cover the surface of the bedrock almost completely. Buried valleys in the bedrock surface contain as much as 150 feet of water-bearing sand and gravel deposits. These deposits, along with the Niagara dolomite, could be developed as sources of water supplemental to that of the sandstone aquifer. The Niagara dolomite is an important aquifer; it yields water from crevices and solution channels. The sandstone aquifer consists of the Galena dolomite, the Platteville limestone, and the St. Peter sandstone of Ordovician age, and the Eau Claire and Mount Simon sandstones of Cambrian age. The St. Peter and Mount Simon are the most productive formations but the others supply some water to wells. Static water levels in the shallow aquifers have not declined to any great extent except in downtown Milwaukee, where a 50-foot-deep cone of depression exists. Static water levels in the sandstone aquifer declined as much as 350 feet in the Milwaukee area from 1880 through 1950. Recharge to the two shallow aquifers occurs locally from precipitation within the area. The major recharge area of the sandstone aquifer lies about 25 miles west of Wauwatosa. Some ground water is recharged to the sandstone aquifer locally by leakage from the Niagara dolomite, mostly through deep uncased wells. Ground water is the source of six municipal supplies and many industrial and commercial supplies in the area. Pumpage from deep wells has increased from about 2.5 mgd in 1900 to about 25 mgd in 1949, of which 6.0 mgd was derived from the shallow aquifers. The total withdrawal from the shallow aquifers, including the 6.0 mgd from the deep wells, was about 19.5 mgd in 1949. Thus the total in 1949 was 38.5 mgd for the area as a whole. Coefficients of transmissibility and storage for the sandstone aquifer were obtained by means of controlled pumping tests at Wauwatosa, Waukesha, Greendale, Town of Lake, and Jefferson. The coefficients were used to calculate the amount of water recharged from the Niagara dolomite to the sandstone aquifer in the area. About 5.5 mgd of the 23 mgd pumped from deep wells in 1950 was supplied locally by leakage from the Niagara dolomite. The coefficients, with corrections for boundaries, were also applied to past records of pumpage to calculate the water-level decline in the sandstone aquifer at Wauwatosa from 1880 through 1950. The calculated decline was 317 feet, and the actual decline was 307 feet. The future water-level decline in the sandstone aquifer at Wauwatosa resulting from estimated future pumping conditions was computed. If the pumpage in the area as ?. whole increases from about 23 mgd in 1950 to about 28 mgd in 1960, the water levels at Wauwatosa will decline as much as 65 feet more by 1960. It is estimated that the available recharge to the sandstone aquifer underlying the Milwaukee-Waukesha area is approximately 60 mgd. It is recommended that new deep wells be located to the west toward the recharge area and that the shallow aquifers be used as auxiliary sources to void excessive lowering of water levels in the sandstone aquifers. Conservation should be practiced by all users of ground water to avoid waste resulting in lower water levels and higher pumping costs.

Wisconsin↗
USGS2004

Ultra-high chlorine in submarine Kı̄lauea glasses: Evidence for direct assimilation of brine by magma

Basaltic glass grains from the submarine south flank of Kı̄lauea, Hawai′i, have Cl concentrations of 0.01–1.68 wt%, the latter being the highest Cl content yet recorded for a Hawaiian glass. The high-Cl glass grains are products of brine assimilation by tholeiite magma. The glasses are grains in a sandstone clast from bedded breccias draping the southwestern margin of Kı̄lauea’s submarine midslope bench. The clast contains two distinct suites of glass grains: abundant degassed tholeiites, perhaps derived from subaerial lavas of Mauna Loa that shattered upon ocean entry, and a smaller population of Kea-type tholeiite ( n =17 analyzed) that erupted subaqueously, based on elevated S (780–1050 ppm), H 2 O (0.42–1.27 wt%), and CO 2 (<30–120 ppm), probably early in Kı̄lauea’s shield-building stage. Ten grains in this group have Cl>1000 ppm, six >5000 ppm, and two grains have >10 000 ppm dissolved Cl. Abundances of H 2 O, Na 2 O, K 2 O, and several trace elements increase regularly with Cl concentration, and we estimate that Cl enrichment was due to up to 13 wt% addition of a brine consisting of 78% H 2 O (wt), 13% Cl, 4.4% Na, 2.6% K, 2.6% Ca, 620 ppm Ba, 360 ppm Sr, 65 ppm Rb, and 7 ppm Pb. The large amounts of brine addition argue against bulk assimilation of low-porosity brine-bearing rock. The brine’s composition is appropriate for a seawater-derived hydrothermal fluid that reacted with basaltic wall rocks at T >100°C, losing Mg and S and gaining K, Ca, Rb, Ba, Sr, and Pb, followed by phase separation near 500°C and ∼50 MPa (5 km below sea level at hydrostatic pressure). Brine was assimilated at or near the depth it formed, as estimated on petrologic grounds, but under lithostatic conditions. The highest extents of assimilation either forced volatile saturation of the magma or enriched already coexisting magmatic vapor in H 2 O. Possible mechanisms for assimilation are: (1) forcible injection of brine into magma during bursting of overpressured pockets heated by new dikes, or (2) intrusion of magma into lenses or sills occupied by trapped brine.

Hawaii↗
USGS2022

Deep-ocean polymetallic nodules and cobalt-rich ferromanganese crusts in the global ocean: New sources for critical metals

The transition from a global hydrocarbon economy to a green energy economy and the rapidly growing middle class in developing countries are driving the need for considerable new sources of critical materials. Deep-ocean minerals, namely cobalt-rich ferromanganese crusts and polymetallic nodules, are two such new resources generating interest. Polymetallic nodules are essentially two-dimensional mineral deposits sitting on abyssal plain sediments at about 3,500–6,000 m water depths. Metals of economic interest enriched in nodules include nickel, copper, manganese, cobalt and molybdenum. Cobalt-rich ferromanganese crusts are also two-dimensional deposits forming pavements on rock outcrops on seamounts and ridges at water depths of 400–7,000 m. Metals of economic interest for crusts include cobalt, manganese, nickel, molybdenum, tellurium, platinum, vanadium and rare earth elements. A conservative estimate is that 21.1 billion dry tons of polymetallic nodules exist in the Clarion-Clipperton Zone ( CCZ ) manganese nodule field, the largest in area and tonnage of the known global nodule fields. Based on that estimate, tonnages of many critical metals in the CCZ nodules are greater than those found in global terrestrial reserves. About 7.5 billion dry tons of cobalt-rich ferromanganese crusts are estimated to occur in the Pacific Ocean Prime Crust Zone, the area with the highest tonnage of critical-metal-rich crust deposits, with many elements contained therein estimated to be greater than those found in global terrestrial reserves. Deep-ocean mining has not yet been carried out in the Exclusive Economic Zone of any nation, nor in the Areas beyond national jurisdiction, although extensive mineral exploration and environmental studies are being conducted and exploitation regulations codified, indicating that mining activities will likely begin in the near future. If deep-ocean mining follows the evolution of offshore production of petroleum, we can expect that about 35–45 per cent of the demand for critical metals will come from deep-ocean mines by 2065.

Book chapter↗
USGS1990

Double-diffusive convection in geothermal systems: the Salton Sea, California, geothermal system as a likely candidate

Much has been published about double-diffusive convection as a mechanism for explaining variations in composition and temperature within all-liquid natural systems. However, relatively little is known about the applicability of this phenomenon within the heterogeneous rocks of currently active geothermal systems where primary porosity may control fluid flow in some places and fractures may control it in others. The main appeal of double-diffusive convection within hydrothermal systems is-that it is a mechanism that may allow efficient transfer of heat mainly by convection, while at the same time maintaining vertical and lateral salinity gradients. The Salton Sea geothermal system exhibits the following reservoir characteristics: (1) decreasing salinity and temperature from bottom to top and center toward the sides, (2) a very high heat flow from the top of the system that seems to require a major component of convective transfer of heat within the chemically stratified main reservoir, and (3) a relatively uniform density of the reservoir fluid throughout the system at all combinations of subsurface temperature, pressure, and salinity. Double-diffusive convection can account for these characteristics very nicely whereas other previously suggested models appear to account either for the thermal structure or for the salinity variations, but not both. Hydrologists, reservoir engineers, and particularly geochemists should consider the possibility and consequences of double-diffusive convection when formulating models of hydrothermal processes, and of the response of reservoirs to testing and production.

Geothermics↗