USGS Science⌕ Search

SEARCH · USGS Science

Results for “Landslides”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,351 records · Page 75Linked to original sources
USGS1992

A tsunami about 1000 years ago in Puget Sound, Washington

Water surged from Puget Sound sometime between 1000 and 1100 years ago, overrunning tidal marshes and mantling them with centimeters of sand. One overrun site is 10 kilometers northwest of downtown Seattle; another is on Whidbey Island, some 30 kilometers farther north. Neither site has been widely mantled with sand at any other time in the past 2000 years. Deposition of the sand coincided—to the year or less—with abrupt, probably tectonic subsidence at the Seattle site and with landsliding into nearby Lake Washington. These findings show that a tsunami was generated in Puget Sound, and they tend to confirm that a large shallow earthquake occurred in the Seattle area about 1000 years ago.

Washington↗
USGS2025

Cascading land surface hazards as a nexus in the Earth system

Earth’s surface is sculpted by numerous processes that move sediment, ranging from gradual and benign to abrupt and catastrophic. Although infrequent, high-magnitude sediment mobilization events can be hazardous to people and infrastructure, leaving topographic imprints on the landscape and remarkable narratives in the historical record. Hazardous events such as fires, storms, and earthquakes accelerate erosion and sediment transport, increasing landscape sensitivity to subsequent perturbations, thus forming a cascading hazard. Although the redistribution of sediment across Earth’s landscape can result in higher risks to vulnerable populations, cascading processes are commonly unaccounted for in hazard assessments. Cascading hazards can occur almost immediately after triggering events, such as coseismic landslides, or over months, years, or even decades after an initial perturbation, such as debris flows after wildfires or flooding in channels alluviated by volcanic debris. Sediment cascades span Earth’s surface, from mountaintops to river valleys, where erosion, deposition, and aggradation can lead to a myriad of hazardous processes, including decreased river conveyance capacity, which increases the likelihood of downstream flooding. An improved understanding of the magnitude, frequency, and persistence of cascading hazards is critical given the rapid changes in the frequency and severity of storms, fires, sea-level change, and cryospheric melting, as well as the expansion of high-population-density urban footprints in regions susceptible to solid Earth hazards. Understanding the full consequences and underlying physics of Earth’s cascading land surface hazards can help minimize future human and economic losses.

California↗
USGS2000

Central San Juan caldera cluster: Regional volcanic framework

Eruption of at least 8800 km 3 of dacitic-rhyolitic magma as 9 major ash-slow sheets (individually 150-5000 km 3 ) was accompanied by recurrent caldera subsidence between 28.3 and about 26.5 Ma in the central San Juan Mountains, Colorado. Voluminous andesitic-decitic lavas and breccias were erupted from central volcanoes prior to the ash-flow eruptions, and similar lava eruptions continued within and adjacent to the calderas during the period of explosive volcanism, making the central San Juan caldera cluster an exceptional site for study of caldera-related volcanic processes. Exposed calderas vary in size from 10 to 75 km in maximum diameter, the largest calderas being associated with the most voluminous eruptions. After collapse of the giant La Garita caldera during eruption if the Fish Canyon Tuff at 17.6 Ma, seven additional explosive eruptions and calderas formed inside the La Garita depression within about 1 m.y. Because of the nested geometry, maximum loci of recurrently overlapping collapse events are inferred to have subsided as much as 10-17 km, far deeper than the roof of the composite subvolcanic batholith defined by gravity data, which represents solidified caldera-related magma bodies. Erosional dissection to depths of as much as 1.5 km, although insufficient to reach the subvolcanic batholith, has exposed diverse features of intracaldera ash-flow tuff and interleaved caldera-collapse landslide deposits that accumulated to multikilometer thickness within concurrently subsiding caldera structures. The calderas display a variety of postcollapse resurgent uplift structures, and caldera-forming events produced complex fault geometries that localized late mineralization, including the epithermal base- and precious-metal veins of the well-known Creede mining district. Most of the central San Juan calderas have been deeply eroded, and their identification is dependent on detailed geologic mapping. In contrast, the primary volcanic morphology of the symmetrically resurgent Creede caldera, the volcanic framework for Lake Creede, has been exceptionally preserved because of rapid infilling by moat sediments of the Creede Formation, which were preferentially eroded during the past few million years. The ash-flow tuffs and caldera of the central San Juan region have been widely recognized as exceptional sites for study of explosive volcanic processes, and the results reported here provide new insights into processes of pyroclastic eruption and emplacement, geometric interrelations between caldera subsidence and resurgence, the petrologic diversity of sequential ash-flow eruptions, recurrent eruption of intermediate-composition lavas after each caldera-forming event, associated regional fault development, volume relations between ash-flow eruptions and associated calderas, the emplacement of subvolcanic batholiths, and involvement of mantle-derived mafic phases in magma-generation processes.

Colorado↗
USGS1971

Sedimentary and gravity-slide emplacement of serpentinite

Large deposits of serpentinite in alpine-type orogenic areas have been formed by sedimentary processes ranging from the detrital accumulation of bedded serpentinite sandstone and shale to the emplacement of chaotic breccias (olistostromes) and gigantic slide blocks. Known occurrences of sedimentary serpentinite are listed, and eight deposits from the circum-Pacific, Caribbean, and Mediterranean areas are described in detail. Sedimentary serpentinites range in age from early Paleozoic to Quaternary, although most are Cretaceous or Tertiary. Most were deposited in eugeosynclinal environments, early in the geosynclinal cycle. Individual deposits range in thickness from a few centimeters to nearly 3 km, and several extend laterally for tens of kilometers. Graded bedding is common, and many deposits contain marine fossils. Serpentinite is the dominant rock constituent, and clasts foreign to the alpine ultramafic assemblage are rare. Chemical analyses often detrital serpentinites show that these rocks contain slightly more silica and alumina than do nondetrital serpentinites, due to contamination by aluminosilicate minerals and quartz during deposition. This and nine other criteria are potentially useful in the recognition of sedimentary serpentinites. Several features suggest that most sedimentary serpentinites were deposited very rapidly by submarine landslides, mudflows, or turbidity currents. The sources of this serpentinite debris are postulated to be upward-migrating serpentinite protrusions which penetrate the seafloor or Earth's surface upslope from eventual depositional sites. Sedimentary serpentinites are much more abundant in alpine-type orogenic areas than is commonly thought, and many ultramafic masses presently regarded as igneous intrusions or tectonic protrusions may in fact be coeval with, instead of younger than, their enclosing sedimentary or metasedimentary rocks. In eugeosynclinal sequences such as the Franciscan Formation, some elongate bodies now regarded as serpentinite sills may be beds of ultramafic detritus whose sedimentary features have been masked by post-depositional shearing; isolated masses may be exotic slide blocks. A sedimentary origin can explain some of the most persistent and perplexing characteristics of many alpine serpentinites: their conformity with enclosing sedimentary rocks, their grossly planar shapes, and the absence of metamorphism along their contacts.

California↗
USGS1990

Geology and origin of the late Proterozoic Darb Zubaydah ophiolite, Kingdom of Saudi Arabia

The Late Proterozoic (830 ± 20 Ma) Darb Zubaydah ophiolite, north-central Arabian Shield, preserves a largely intact section consisting of ultramafic rocks, gabbro, diabase, granodiorite, and interbedded volcanic and sedimentary rocks. Formation of these rocks within or near an island arc is indicated by the absence of pelagic sediments and the abundance of pillow basalt, turbiditic sediments, lahar deposits, and basaltic to rhyolitic tuff. The oldest extrusive rocks, which range from tholeiites with MORB characteristics to calc-alkaline andesites and rhyolites, formed in a young, relatively un-evolved island are or in a back-arc basin sufficiently close to an arc to receive calc-alkaline lava flows and coarse-grained, arc-derived detritus. tus. Overlying turbidites and lahar deposits of the Kaffan sandstone point to the initiation of a rifting event. High-Ti basalts, which erupted above the Kaffan sandstone, and related diabase are interpreted to be magmatic products of incipient intra-arc rifting. Renewed arc volcanism produced calc-alkaline volcanic rocks that interfingered with the high-Ti basalt and later dominated the section as the volcanic apron of the arc prograded basinward. Extrusion of voluminous calc-alkaline tuff may have been contemporaneous with intrusion of granodiorite and gravity-driven landsliding.

Geological Society of America Bulletin↗
USGS1994

The volcanic, sedimentologic, and paleolimnologic history of the Crater Lake caldera floor, Oregon:Evidence for small caldera evolution

Apparent phreatic explosion craters, caldera-floor volcanic cones, and geothermal features outline a ring fracture zone along which Mount Mazama collapsed to form the Crater Lake caldera during its climactic eruption about 6,850 yr B.P. Within a few years, subaerial deposits infilled the phreatic craters and then formed a thick wedge (10-20 m) of mass flow deposits shed from caldera walls. Intense volcanic activity (phreatic explosions, subaerial flows, and hydrothermal venting) occurred during this early postcaldera stage, and a central platform of subaerial andesite flows and scoria formed on the caldera floor. Radiocarbon ages suggest that deposition of Iacustrine hemipelagic sediment began on the central platform about 150 yr after the caldera collapse. This is the minimum time to fill the lake halfway with water and cover the platform assuming present hydrologic conditions of precipitation and evaporation but with negligible leakage of lake water. Wizard Island formed during the final part of the 300-yr lake-filling period as shown by its (1) upper subaerial lava flows from 0 to -70 m below present water level and lower subaqueous lava flows from -70 to -500 m and by (2) lacustrine turbidite sand derived from Wizard Island that was deposited on the central platform about 350 yr after the caldera collapse. Pollen stratigraphy indicates that the warm and dry climate of middle Holocene time correlates with the early lake deposits. Diatom stratigraphy also suggests a more thermally stratified and phosphate-rich environment associated respectively with this climate and greater hydrothermal activity during the early lake history. Apparent coarse-grained and thick-bedded turbidites of the early lake beds were deposited throughout northwest, southwest, and eastern basins during the time that volcanic and seismic activity formed the subaqueous Wizard Island, Merriam Cone, and rhyodacite dome. The last known postcaldera volcanic activity produced a subaqueous rhyodacite ash bed and dome about 4,240 yr B.P. The late lake beds with base-of-slope aprons and thin, fine-grained basin-plain turbidites were deposited during the volcanically quiescent period of the past 4,000 yr. Deposits in Crater Lake and on similar caldera floors suggest that four stages characterize the postcaldera evolution of smaller (≤10 km in diameter) terrestrial caldera lake floors: (1) initial-stage caldera collapse forms the ring fracture zone that controls location of the main volcanic eruptive centers and sedimentary basin depocenters on the caldera floor; (2) early-stage subaerial sedimentation rapidly fills ring-fracture depressions and constructs basin-floor debris fans from calderawall landslides; (3) first-stage subaqueous sedimentation deposits thick flat-lying lake turbidites throughout basins, while a thin blanket of hemipelagic sediment covers volcanic edifices that continue to form concurrently with lake sedimentation; and (4) second-stage subaqueous sedimentation after the waning of major volcanic activity and the earlier periods of most rapid sedimentation develops small sili-ciclastic basin base-of-slope turbidite aprons and central basin plains. Renewed volcanic activity or lake destruction could cause part or all of the cycle to repeat.

Oregon↗
USGS1994

Chaotic deposition by a giant wave, Molokai, Hawaii

A coral-basalt breccia-conglomerate is exposed >60m above present sea level and nearly 2km inland from the present shoreline on the southwest side of East Molokai Volcano. This deposits was apparently laid down by a giant wave that broke over an outer reef, similar to the present fringing reef, and advanced as a turbulent bore over the back-reef flat, picking up a slurry of carbonate-rich debris and depositing it on the slopes inland as the wave advanced. U-series dating of coral fragments indicates that the age of this deposit is 240-200 ka. This giant wave was most likley caused by one of the many large submarine landslides that have been identified on the lower slopes of the major Hawaiian Islands.

Hawaii↗
USGS1999

Late Quaternary slip rate and seismic hazards of the West Klamath Lake fault zone near Crater Lake, Oregon Cascades

Crater Lake caldera is at the north end of the Klamath graben, where this N10°W-trending major Basin and Range structure impinges upon the north-south–trending High Cascades volcanic arc. East-facing normal faults, typically 10–15 km long, form the West Klamath Lake fault zone, which bounds the graben on its west side. The fault zone terminates on the south near the epicentral area of the September 1993 Klamath Falls earthquakes. It continues north past Crater Lake as the Annie Spring fault, which is within ∼1 km of the west caldera rim, and Red Cone Spring fault. We have determined a long-term vertical slip rate of 0.3 mm/yr for these two faults using high-precision K-Ar and 40 Ar/ 39 Ar age measurements on offset lava flows ranging in age from ca. 35 to 300 ka. Holocene offset reported by Hawkins et al. and epicenters of eight M W 2 earthquakes in 1994 and 1995 indicate that the West Klamath Lake fault zone is active. Empirical relations between earthquake magnitudes and scarp heights or fault lengths suggest that the fault zone is capable of producing earthquakes as large as M W 7¼. Earthquakes on these or other faults of the zone could trigger landslides and rockfalls from the walls of the caldera, possibly resulting in large waves on Crater Lake.

Oregon↗
USGS2000

Deep magmatic structures of Hawaiian volcanoes, imaged by three-dimensional gravity models

A simplified three-dimensional model for the island of Hawai'i, based on 3300 gravity measurements, provides new insights on magma pathways within the basaltic volcanoes. Gravity anomalies define dense cumulates and intrusions beneath the summits and known rift zones of every volcano. Linear gravity anomalies project southeast from Kohala and Mauna Kea summits and south from Hualālai and Mauna Loa; these presumably express dense cores of previously unrecognized rift zones lacking surface expression. The gravity-modeled dense cores probably define tholeiitic shield–stage structures of the older volcanoes that are now veneered by late alkalic lavas. The three-dimensional gravity method is valuable for characterizing the magmatic systems of basaltic oceanic volcanoes and for defining structures related to landslide and seismic hazards.

Hawaii↗
USGS2008

The ancestral cascades arc: Cenozoic evolution of the central Sierra Nevada (California) and the birth of the new plate boundary

We integrate new stratigraphic, structural, geochemical, geochronological, and magnetostratigraphic data on Cenozoic volcanic rocks in the central Sierra Nevada to arrive at closely inter-related new models for: (1) the paleogeography of the ancestral Cascades arc, (2) the stratigraphic record of uplift events in the Sierra Nevada, (3) the tectonic controls on volcanic styles and compositions in the arc, and (4) the birth of a new plate margin. Previous workers have assumed that the ancestral Cascades arc consisted of stratovolcanoes, similar to the modern Cascades arc, but we suggest that the arc was composed largely of numerous, very small centers, where magmas frequently leaked up strands of the Sierran frontal fault zone. These small centers erupted to produce andesite lava domes that collapsed to produce block-and-ash flows, which were reworked into paleocanyons as volcanic debris flows and streamflow deposits. Where intrusions rose up through water-saturated paleocanyon fill, they formed peperite complexes that were commonly destabilized to form debris flows. Paleocanyons that were cut into Cretaceous bedrock and filled with Oligocene to late Miocene strata not only provide a stratigraphic record of the ancestral Cascades arc volcanism, but also deep unconformities within them record tectonic events. Preliminary correlation of newly mapped unconformities and new geochronological, magnetostratigraphic, and structural data allow us to propose three episodes of Cenozoic uplift that may correspond to (1) early Miocene onset of arc magmatism (ca. 15 Ma), (2) middle Miocene onset of Basin and Range faulting (ca. 10 Ma), and (3) late Miocene arrival of the triple junction (ca. 6 Ma), perhaps coinciding with a second episode of rapid extension on the range front. Oligocene ignimbrites, which erupted from calderas in central Nevada and filled Sierran paleocanyons, were deeply eroded during the early Miocene uplift event. The middle Miocene event is recorded by growth faulting and landslides in hanging-wall basins of normal faults. Cessation of andesite volcanism closely followed the late Miocene uplift event. We show that the onset of Basin and Range faulting coincided both spatially and temporally with eruption of distinctive, very widespread, high-K lava flows and ignimbrites from the Little Walker center (Stanislaus Group). Preliminary magnetostratigraphic work on high-K lava flows (Table Mountain Latite, 10.2 Ma) combined with new 40 Ar/ 39 Ar age data allow regional-scale correlation of individual flows and estimates of minimum (28,000 yr) and maximum (230,000 yr) time spans for eruption of the lowermost latite series. This work also verifies the existence of reversed-polarity cryptochron, C5n.2n-1 at ca. 10.2 Ma, which was previously known only from seafloor magnetic anomalies. High-K volcanism continued with eruption of the three members of the Eureka Valley Tuff (9.3-9.15 Ma). In contrast with previous workers in the southern Sierra, who interpret high-K volcanism as a signal of Sierran root delamination, or input of subduction-related fluids, we propose an alternative model for K 2 O-rich volcanism. A regional comparison of central Sierran volcanic rocks reveals their K 2 O levels to be intermediate between Lassen to the north (low in K 2 O) and ultrapotassic volcanics in the southern Sierra. We propose that this shift reflects higher pressures of fractional crystallization to the south, controlled by a southward increase in the thickness of the granitic crust. At high pressures, basaltic magmas precipitate clinopyroxene (over olivine and plagioclase) at their liquidus; experiments and mass-balance calculations show that clinopyroxene fractionation buffers SiO 2 to low values while allowing K 2 O to increase. A thick crust to the south would also explain the sparse volcanic cover in the southern Sierra compared to the extensive volcanic cover to the north.

Special Paper of the Geological Society of America↗
USGS2008

Late pleistocene aggradation and degradation of the lower colorado river: Perspectives from the Cottonwood area and other reconnaissance below Boulder Canyon

Where the lower Colorado River traverses the Basin and Range Province below the Grand Canyon, significant late Pleistocene aggradation and subsequent degrada tion of the river are indicated by luminescence, paleomagnetic, and U-series data and stratigraphy. Aggradational, finely bedded reddish mud, clay, and silt are underlain and overlain by cross-bedded to plane-bedded fine sand and silt. That sequence is commonly disconformably overlain by up to 15 m of coarse sand, rounded exotic gravel, and angular, locally derived gravel. Luminescence dates on the fine sediments range from ca. 40 ka to 70 ka, considering collective uncertainties. A section of fine grained sediments over a vertical range of 15 m shows normal polarity magnetization and little apparent secular variation beyond dispersion that can be explained by com paction. Aggradation on large local tributaries such as Las Vegas Wash appears to have been coeval with that of the Colorado River. The upper limits of erosional rem nants of the sequence define a steeper grade above the historical river, and these late Pleistocene deposits are greater than 100 m above the modern river north of 35??N. Ter race gravels inset below the upper limit of the aggradational sequence yield 230Th dates that range from ca. 32 ka to 60 ka and indicate that degradation of the river system in this area closely followed aggradation. The thick sequence of rhythmically bedded mud and silt possibly indicates set tings that were ponded laterally between valley slopes and levees of the aggrading river. Potential driving mechanisms for such aggradation and degradation include sediment-yield response to climate change, drought, fire, vegetation-ecosystem dynam ics, glaciation, paleofloods, groundwater discharge, and building and destruction of natural dams produced by volcanism and landslides. ?? 2008 The Geological Society of America.

Conference Paper↗
USGS2009

Geology and geomorphology of Bear Lake Valley and upper Bear River, Utah and Idaho

Bear Lake, on the Idaho-Utah border, lies in a fault-bounded valley through which the Bear River flows en route to the Great Salt Lake. Surficial deposits in the Bear Lake drainage basin provide a geologic context for interpretation of cores from Bear Lake deposits. In addition to groundwater discharge, Bear Lake received water and sediment from its own small drainage basin and sometimes from the Bear River and its glaciated headwaters. The lake basin interacts with the river in complex ways that are modulated by climatically induced lake-level changes, by the distribution of active Quaternary faults, and by the migration of the river across its fluvial fan north of the present lake. The upper Bear River flows northward for ???150 km from its headwaters in the northwestern Uinta Mountains, generally following the strike of regional Laramide and late Cenozoic structures. These structures likely also control the flow paths of groundwater that feeds Bear Lake, and groundwater-fed streams are the largest source of water when the lake is isolated from the Bear River. The present configuration of the Bear River with respect to Bear Lake Valley may not have been established until the late Pliocene. The absence of Uinta Range-derived quartzites in fluvial gravel on the crest of the Bear Lake Plateau east of Bear Lake suggests that the present headwaters were not part of the drainage basin in the late Tertiary. Newly mapped glacial deposits in the Bear River Range west of Bear Lake indicate several advances of valley glaciers that were probably coeval with glaciations in the Uinta Mountains. Much of the meltwater from these glaciers may have reached Bear Lake via groundwater pathways through infiltration in the karst terrain of the Bear River Range. At times during the Pleistocene, the Bear River flowed into Bear Lake and water level rose to the valley threshold at Nounan narrows. This threshold has been modified by aggradation, downcutting, and tectonics. Maximum lake levels have decreased from as high as 1830 m to 1806 m above sea level since the early Pleistocene due to episodic downcutting by the Bear River. The oldest exposed lacustrine sediments in Bear Lake Valley are probably of Pliocene age. Several high-lake phases during the early and middle Pleistocene were separated by episodes of fluvial incision. Threshold incision was not constant, however, because lake highstands of as much as 8 m above bedrock threshold level resulted from aggradation and possibly landsliding at least twice during the late-middle and late Pleistocene. Abandoned stream channels within the low-lying, fault-bounded region between Bear Lake and the modern Bear River show that Bear River progressively shifted northward during the Holocene. Several factors including faulting, location of the fluvial fan, and channel migration across the fluvial fan probably interacted to produce these changes in channel position. Late Quaternary slip rates on the east Bear Lake fault zone are estimated by using the water-level history of Bear Lake, assuming little or no displacement on dated deposits on the west side of the valley. Uplifted lacustrine deposits representing Pliocene to middle Pleistocene highstands of Bear Lake on the footwall block of the east Bear Lake fault zone provide dramatic evidence of long-term slip. Slip rates during the late Pleistocene increased from north to south along the east Bear Lake fault zone, consistent with the tectonic geomorphology. In addition, slip rates on the southern section of the fault zone have apparently decreased over the past 50 k.y. Copyright ?? 2009 The Geological Society of America.

Special Paper of the Geological Society of America↗
USGS2013

Deformational and erosional history for the Abiquiu and contiguous area, north-central New Mexico: Implications for formation of the Abiquiu embayment and a discussion of new geochronological and geochemical analysis

Geologic mapping, age determinations, and geochemistry of rocks exposed in the Abiquiu area of the Abiquiu embayment of the Rio Grande rift, north-central New Mexico, provide data to determine fault-slip and incision rates. Vertical-slip rates for faults in the area range from 16 m/m.y. to 42 m/m.y., and generally appear to decrease from the eastern edge of the Colorado Plateau to the Abiquiu embayment. Incision rates calculated for the period ca. 10 to ca. 3 Ma indicate rapid incision with rates that range from 139 m/m.y. on the eastern edge of the Colorado Plateau to 41 m/m.y. on the western part of the Abiquiu embayment. The Abiquiu area is located along the margin of the Colorado Plateau–Rio Grande rift and lies within the Abiquiu embayment, a shallow, early extensional basin of the Rio Grande rift. Cenozoic rocks include the Eocene El Rito Formation, Oligocene Ritito Conglomerate, Oligocene–Miocene Abiquiu Formation, and Miocene Chama–El Rito and Ojo Caliente Sandstone Members of the Tesuque Formation (Santa Fe Group). Volcanic rocks include the Lobato Basalt (Miocene; ca. 15–8 Ma), El Alto Basalt (Pliocene; ca. 3 Ma), and dacite of the Tschicoma Formation (Pliocene; ca. 2 Ma). Quaternary deposits consist of inset axial and side-stream deposits of the ancestral Rio Chama (Pleistocene in age), landslide and pediment alluvium and colluvium, and Holocene main and side-stream channel and floodplain deposits of the modern Rio Chama. The predominant faults are Tertiary normal high-angle faults that displace rocks basinward. A low-angle fault, referred to as the Abiquiu fault, locally separates an upper plate composed of the transitional zone of the Ojo Caliente Sandstone and Chama–El Rito Members from a lower plate consisting of the Abiquiu Formation or the Ritito Conglomerate. The upper plate is distended into blocks that range from about 0.1 km to 3.5 km long that may represent a larger sheet that has been broken up and partly eroded. Geochronology ( 40 Ar/ 39 Ar) from fifteen volcanic and intrusive rocks resolves discrete volcanic episodes in the Abiquiu area: (1) emplacement of Early and Late Miocene basaltic dikes at 20 Ma and ca. 10 Ma; (2) extensive Late Miocene–age lava flows at 9.5 Ma, 7.9 Ma, and 5.6 Ma; and (3) extensive basaltic eruptions during the early Pliocene at 2.9 Ma and 2.4 Ma. Clasts of biotite- and hornblende-rich trachyandesites and trachydacites from the base of the Abiquiu Formation are dated at ca. 27 Ma, possibly derived from the Latir volcanic field. The most-mafic magmas are interpreted to be generated from a similar lithospheric mantle during rifting, but variations in composition are correlated with partial melting at different depths, which is correlated with thinning of the crust due to extensional processes.

GSA Special Papers↗
USGS2014

Glacial and Quaternary geology of the northern Yellowstone area, Montana and Wyoming

This field guide focuses on the glacial geology and paleoecology beginning in the Paradise Valley and progressing southward into northern Yellowstone National Park. During the last (Pinedale) glaciation, the northern Yellowstone outlet glacier flowed out of Yellowstone Park and down the Yellowstone River Valley into the Paradise Valley. The field trip will traverse the following Pinedale glacial sequence: (1) deposition of the Eightmile terminal moraines and outwash 16.5 ± 1.4 10Be ka in the Paradise Valley; (2) glacial recession of ~8 km and deposition of the Chico moraines and outwash 16.1 ± 1.7 10Be ka; (3) glacial recession of 45 km to near the northern Yellowstone boundary and moraine deposition during the Deckard Flats readjustment 14.2 ± 1.2 10Be ka; and (4) glacial recession of ~37 km and deposition of the Junction Butte moraines 15.2 ± 1.3 10Be ka (this age is a little too old based on the stratigraphic sequence). Yellowstone's northern range of sagebrush-grasslands and bison, elk, wolf, and bear inhabitants is founded on glacial moraines, sub-glacial till, and outwash deposited during the last glaciation. Floods released from glacially dammed lakes and a landslide-dammed lake punctuate this record. The glacial geologic reconstruction was evaluated by calculation of basal shear stress, and yielded the following values for flow pattern in plan view: strongly converging—1.21 ± 0.12 bars (n = 15); nearly uniform—1.04 ± 0.16 bars (n = 11); and strongly diverging—0.84 ± 0.14 bars (n = 16). Reconstructed mass balance yielded accumulation and ablation each of ~3 km3/yr, with glacial movement near the equilibrium line altitude dominated by basal sliding. Pollen and charcoal records from three lakes in northern Yellowstone provide information on the postglacial vegetation and fire history. Following glacial retreat, sparsely vegetated landscapes were colonized first by spruce parkland and then by closed subalpine forests. Regional fire activity increased significantly with the development of closed subalpine forests as a result of increased fuel biomass and warmer summers. Warm dry conditions prevailed at low elevations during the early Holocene, as indicated by the presence of steppe and open mixed conifer forest. At the same time, closed subalpine forests with low fire frequency were present at higher elevations, suggesting relatively wet summer conditions. Douglas fir populations expanded throughout northern Yellowstone in the middle Holocene as a result of effectively drier conditions than before, and a decline of mesophytic plant taxa during the late Holocene imply continued drying, even though fire frequency decreased in recent millennia.

Montana;Wyoming↗
USGS2017

Geology of Seattle, a field trip

Seattle’s geologic record begins with Eocene deposition of fluvial arkosic sandstone and associated volcanic rocks of the Puget Group, perhaps during a time of regional strike-slip faulting, followed by late Eocene and Oligocene marine deposition of the Blakeley Formation in the Cascadia forearc. Older Quaternary deposits are locally exposed. Most of the city is underlain by up to 100 m of glacial drift deposited during the Vashon stade of Fraser glaciation, 18–15 cal k.y. B.P. Vashon Drift includes lacustrine clay and silt of the Lawton Clay, lacustrine and fluvial sand of the Esperance Sand, and concrete-like Vashon till. Mappable till is absent over much of the area of the Vashon Drift. Peak local ice thickness was 900 m. Isostatic response to this brief ice loading was significant. Upon deglaciation, global ice-equivalent sea level was about −100 m and local RSL (relative sea level) was 15–20 m, suggesting a total isostatic depression of ~115–120 m at Seattle. Subsequent rapid rebound outstripped global sea-level rise to result in a newly recognized marine low-stand shoreline at −50 m. The Seattle fault is a north-verging thrust or reverse fault with ~7.5 km of throw. Conglomeratic Miocene strata may record initiation of shortening. Field relations indicate that fault geometry has evolved through three phases. At present, the north-verging master fault is blind, whereas several surface-rupturing faults above the master fault are south verging. The 900–930 A.D. Restoration Point earthquake raised a 5 km × 35 km (or larger) area as much as 7 m. The marine low-stand shoreline is offset by a similar amount, thus there has been only one such earthquake in the last ~11 k.y. Geomorphology is largely glacial: an outwash plain decorated with ice-molded flutes and large, anastomosing tunnel valleys carved by water flowing beneath the ice sheet. Euro-Americans initially settled here because of landscape features formed by uplift in the Restoration Point earthquake. But steep slopes and tide flats were not conducive to commerce: starting in the 1890s and ending in the 1920s, extensive regrading removed hills, decreased slopes, and filled low areas. In steep slopes the glacial stratigraphy is prone to landslides when saturated by unusually wet winters. Seismic hazards comprise moderately large (M 7) earthquakes in the Benioff zone 50 km and more beneath the city, demi-millennial M 9 events on the subduction zone to the west, and infrequent local crustal earthquakes (M 7) that are likely to be devastating because of their proximity. Seismic shaking and consequent liquefaction are of particular concern in Pioneer Square, SoDo, and lower Duwamish neighborhoods, which are largely built on unengineered fill that was placed over estuarine mud. Debris from past Mount Rainier lahars has reached the lower Duwamish valley and a future large lahar could pose a sedimentation hazard.

Washington↗
USGS2003

Hydrothermal and tectonic activity in northern Yellowstone Lake, Wyoming

Yellowstone National Park is the site of one of the world's largest calderas. The abundance of geothermal and tectonic activity in and around the caldera, including historic uplift and subsidence, makes it necessary to understand active geologic processes and their associated hazards. To that end, we here use an extensive grid of high-resolution seismic reflection profiles (∼450 km) to document hydrothermal and tectonic features and deposits in northern Yellowstone Lake. Sublacustrine geothermal features in northern Yellowstone Lake include two of the largest known hydrothermal explosion craters, Mary Bay and Elliott's. Mary Bay explosion breccia is distributed uniformly around the crater, whereas Elliott's crater breccia has an asymmetric distribution and forms a distinctive, ∼2-km-long, hummocky lobe on the lake floor. Hydrothermal vents and low-relief domes are abundant on the lake floor; their greatest abundance is in and near explosion craters and along linear fissures. Domed areas on the lake floor that are relatively unbreached (by vents) are considered the most likely sites of future large hydrothermal explosions. Four submerged shoreline terraces along the margins of northern Yellowstone Lake add to the Holocene record of postglacial lake-level fluctuations attributed to “heavy breathing” of the Yellowstone magma reservoir and associated geothermal system. The Lake Hotel fault cuts through northwestern Yellowstone Lake and represents part of a 25-km-long distributed extensional deformation zone. Three postglacial ruptures indicate a slip rate of ∼0.27 to 0.34 mm/yr. The largest (3.0 m slip) and most recent event occurred in the past ∼2100 yr. Although high heat flow in the crust limits the rupture area of this fault zone, future earthquakes of magnitude ∼5.3 to 6.5 are possible. Earthquakes and hydrothermal explosions have probably triggered landslides, common features around the lake margins. Few high-resolution seismic reflection surveys have been conducted in lakes in active volcanic areas. Our data reveal active geothermal features with unprecedented resolution and provide important analogues for recognition of comparable features and potential hazards in other subaqueous geothermal environments.

Wyoming↗
USGS2012

Owyhee River intracanyon lava flows: does the river give a dam?

Rivers carved into uplifted plateaus are commonly disrupted by discrete events from the surrounding landscape, such as lava flows or large mass movements. These disruptions are independent of slope, basin area, or channel discharge, and can dominate aspects of valley morphology and channel behavior for many kilometers. We document and assess the effects of one type of disruptive event, lava dams, on river valley morphology and incision rates at a variety of time scales, using examples from the Owyhee River in southeastern Oregon. Six sets of basaltic lava flows entered and dammed the river canyon during two periods in the late Cenozoic ca. 2 Ma–780 ka and 250–70 ka. The dams are strongly asymmetric, with steep, blunt escarpments facing up valley and long, low slopes down valley. None of the dams shows evidence of catastrophic failure; all blocked the river and diverted water over or around the dam crest. The net effect of the dams was therefore to inhibit rather than promote incision. Once incision resumed, most of the intracanyon flows were incised relatively rapidly and therefore did not exert a lasting impact on the river valley profile over time scales >10 6 yr. The net long-term incision rate from the time of the oldest documented lava dam, the Bogus Rim lava dam (≤1.7 Ma), to present was 0.18 mm/yr, but incision rates through or around individual lava dams were up to an order of magnitude greater. At least three lava dams (Bogus Rim, Saddle Butte, and West Crater) show evidence that incision initiated only after the impounded lakes filled completely with sediment and there was gravel transport across the dams. The most recent lava dam, formed by the West Crater lava flow around 70 ka, persisted for at least 25 k.y. before incision began, and the dam was largely removed within another 35 k.y. The time scale over which the lava dams inhibit incision is therefore directly affected by both the volume of lava forming the dam and the time required for sediment to fill the blocked valley. Variations in this primary process of incision through the lava dams could be influenced by additional independent factors such as regional uplift, drainage integration, or climate that affect the relative base level, discharge, and sediment yield within the watershed. By redirecting the river, tributaries, and subsequent lava flows to different parts of the canyon, lava dams create a distinct valley morphology of flat, broad basalt shelves capping steep cliffs of Tertiary sediment. This stratigraphy is conducive to landsliding and extends the effects of intracanyon lava flows on channel geomorphology beyond the lifetime of the dams.

Oregon↗
USGS2014

Stratigraphic and microfossil evidence for a 4500-year history of Cascadia subduction zone earthquakes and tsunamis at Yaquina River estuary, Oregon, USA

The Sallys Bend swamp and marsh area on the central Oregon coast onshore of the Cascadia subduction zone contains a sequence of buried coastal wetland soils that extends back ∼4500 yr B.P. The upper 10 of the 12 soils are represented in multiple cores. Each soil is abruptly overlain by a sandy deposit and then, in most cases, by greater than 10 cm of mud. For eight of the 10 buried soils, times of soil burial are constrained through radiocarbon ages on fine, delicate detritus from the top of the buried soil; for two of the buried soils, diatom and foraminifera data constrain paleoenvironment at the time of soil burial. We infer that each buried soil represents a Cascadia subduction zone earthquake because the soils are laterally extensive and abruptly overlain by sandy deposits and mud. Preservation of coseismically buried soils occurred from 4500 yr ago until ∼500–600 yr ago, after which preservation was compromised by cessation of gradual relative sea-level rise, which in turn precluded drowning of marsh soils during instances of coseismic subsidence. Based on grain-size and microfossil data, sandy deposits overlying buried soils accumulated immediately after a subduction zone earthquake, during tsunami incursion into Sallys Bend. The possibility that the sandy deposits were sourced directly from landslides triggered upstream in the Yaquina River basin by seismic shaking was discounted based on sedimentologic, microfossil, and depositional site characteristics of the sandy deposits, which were inconsistent with a fluvial origin. Biostratigraphic analyses of sediment above two buried soils—in the case of two earthquakes, one occurring shortly after 1541–1708 cal. yr B.P. and the other occurring shortly after 3227–3444 cal. yr B.P.—provide estimates that coseismic subsidence was a minimum of 0.4 m. The average recurrence interval of subduction zone earthquakes is 420–580 yr, based on an ∼3750–4050-yr-long record and seven to nine interearthquake intervals. The comparison of the Yaquina Bay earthquake record to similar records at other Cascadia coastal sites helps to define potential patterns of rupture for different earthquakes, although inherent uncertainty in dating precludes definitive statements about rupture length during earthquakes. We infer that in the first half of the last millennia, the northern Oregon part of the subduction zone had a different rupture history than the southern Oregon part of the subduction zone, and we also infer that at ca. 1.6 ka, two earthquakes closely spaced in time together ruptured a length of the megathrust that extends at least from southwestern Washington to southern Oregon.

Oregon↗