USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geological Bulletin”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,189 records · Page 66Linked to original sources
USGS1998

Use of fault striations and dislocation models to infer tectonic shear stress during the 1995 Hyogo-Ken Nanbu (Kobe) earthquake

Dislocation models of the 1995 Hyogo-ken Nanbu (Kobe) earthquake derived by Yoshida et al. (1996) show substantial changes in direction of slip with time at specific points on the Nojima and Rokko fault systems, as do striations we observed on exposures of the Nojima fault surface on Awaji Island. Spudich (1992) showed that the initial stress, that is, the shear traction on the fault before the earthquake origin time, can be derived at points on the fault where the slip rake rotates with time if slip velocity and stress change are known at these points. From Yoshida's slip model, we calculated dynamic stress changes on the ruptured fault surfaces. To estimate errors, we compared the slip velocities and dynamic stress changes of several published models of the earthquake. The differences between these models had an exponential distribution, not gaussian. We developed a Bayesian method to estimate the probability density function (PDF) of initial stress from the striations and from Yoshida's slip model. Striations near Toshima and Hirabayashi give initial stresses of about 13 and 7 MPa, respectively. We obtained initial stresses of about 7 to 17 MPa at depths of 2 to 10 km on a subset of points on the Nojima and Rokko fault systems. Our initial stresses and coseismic stress changes agree well with postearthquake stresses measured by hydrofracturing in deep boreholes near Hirabayashi and Ogura on Awaji Island. Our results indicate that the Nojima fault slipped at very low shear stress, and fractional stress drop was complete near the surface and about 32% below depths of 2 km. Our results at depth depend on the accuracy of the rake rotations in Yoshida's model, which are probably correct on the Nojima fault but debatable on the Rokko fault. Our results imply that curved or cross-cutting fault striations can be formed in a single earthquake, contradicting a common assumption of structural geology.

Bulletin of the Seismological Society of America↗
USGS1983

Trends in Engineering Geologic and Related Mapping 1972–1983

Progress is reviewed that has been made during the period 1972-1982 in producing medium- and small-scale engineering geologic maps with a variety of content. Improved methods to obtain and present information are evolving. Standards concerning text and map content, soil and rock classification, and map symbols have been proposed. Application of geomorphological techniques in terrain evaluation has increased, as has the use of aerial photography and other remote sensing. Computers are being used to store, analyze, retrieve, and print both text and map information. Development of offshore resources, especially petroleum, has led to marked improvement and growth in marine engineering geology and geotechnology. Coordinated planning for societal needs has required broader scope and increased complexity of both engineering geologic and environmental geologic studies. Refs.

Bulletin of the Association of Engineering Geologi↗
USGS2008

Peak-flow frequency estimates based on data through water year 2001 for selected streamflow-gaging stations in South Dakota

Numerous users, including the South Dakota Department of Transportation, have continuing needs for peak-flow information for the design of highway infrastructure and many other purposes. This report documents results from a cooperative study between the South Dakota Department of Transportation and the U.S. Geological Survey to provide an update of peak-flow frequency estimates for South Dakota. Estimates of peak-flow magnitudes for 2-, 5-, 10-, 25-, 50-, 100-, 200-, and 500-year recurrence intervals are reported for 272 streamflow-gaging stations, which include most gaging stations in South Dakota with 10 or more years of systematic peak-flow records through water year 2001. Recommended procedures described in Bulletin 17B were used as primary guidelines for developing peak-flow frequency estimates. The computer program PEAKFQ developed by the U.S. Geological Survey was used to run the frequency analyses. Flood frequencies for all stations were initially analyzed by using standard Bulletin 17B default procedures for fitting the log-Pearson III distribution. The resulting preliminary frequency curves were then plotted on a log-probability scale, and fits of the curves with systematic data were evaluated. In many cases, results of the default Bulletin 17B analyses were determined to be satisfactory. In other cases, however, the results could be improved by using various alternative procedures for frequency analysis. Alternative procedures for some stations included adjustments to skew coefficients or use of user-defined low-outlier criteria. Peak-flow records for many gaging stations are strongly influenced by low- or zero-flow values. This situation often results in a frequency curve that plots substantially above the systematic record data points at the upper end of the frequency curve. Adjustments to low-outlier criteria reduced the influence of very small peak flows and generally focused the analyses on the upper parts of the frequency curves (10- to 500-year recurrence intervals). The most common alternative procedures involved several different methods to extend systematic records, which was done primarily to address biases resulting from nonrepresentative climatic conditions during several specific periods of record and to reduce inconsistencies among multiple gaging stations along common stream channels with different periods of record. In some cases, records for proximal stations could be combined directly. In other cases, the two-station comparison procedure recommended in Bulletin 17B was used to adjust the mean and standard deviation of the logs of the systematic data for a target station on the basis of correlation with concurrent records from a nearby long-term index station. In some other cases, a 'mixed-station procedure' was used to adjust the log-distributional parameters for a target station, on the basis of correlation with one or more index stations, for the purpose of fitting the log-Pearson III distribution. Historical adjustment procedures were applied to peak-flow frequency analyses for 17 South Dakota gaging stations. A historical adjustment period extending back to 1881 (121 years) was used for 12 gaging stations in the James and Big Sioux River Basins, and various other adjustment periods were used for additional stations. Large peak flows that occurred in 1969 and 1997 accounted for 13 of the 17 historical adjustments. Other years for which historical peak flows were used include 1957, 1962, 1992, and 2001. A regional mixed-population analysis was developed to address complications associated with many high outliers for the Black Hills region. This analysis included definition of two populations of flood events. The population of flood events that composes the main body of peak flows for a given station is considered the 'ordinary-peaks population,' and the population of unusually large peak flows that plot substantially above the main body of peak flows on log-probability scale is co

South Dakota↗
USGS1990

A suggested method for reporting a landslide

The Landslide Report is a Suggested Method developed by the International Geotechnical Societies' UNESCO Working Party on World Landslide Inventory for reporting the position, date, type, geometry, volume and damage of significant landslides.

Bulletin of the International Association of Engin↗
USGS1990

Suggested nomenclature for landslides

The IAEG Commission on Landslides and other Mass Movements on Slopes has proposed English and French names for 19 identifiable features of slope movements and for 7 dimensions of those features. The Commission intends to publish this list in other languages and to supplement and revise it from time to time.

Bulletin of the International Association of Engin↗
USGS1976

Gravitational spreading of steep-sided ridges ("sackung") in western United States

Large-scale gravitational spreading and movement along fractures of steep-sided ridges in the mountainous areas of the western United States are characterized by linear fissures, trenches, and uphill-facing scarps on tops and sides of ridges. Spreading appears to take place by movement along disconnected planes and/or by slow plastic deformation of a rock mass. In some places, valleyward squeezing out of weak shales overlain by rigid rocks causes extensional fracturing and outward movement of the rigid layers, as illustrated by extension of two laccoliths overlying Mancos Shale, one at Dolores Peak and another at Crested Butte in western Colorado. Gravitational forces acting on a ridge of more homogeneous material causes tensional spreading of the ridge parallel to its long axis, for example in fractured granitic rock north of Mt. Massive in central Colorado, where a survey course has been established to monitor the movement. Recognition and understanding of these large-scale gravitational features and the mechanism that causes them are pertinent to site selection and design of engineering structures in high mountains. If fractures extend to considerable depth and if movement is continuing, engineering structures in valleys or tunnels through the spreading ridges could be damaged.

Bulletin of the International Association of Engin↗
USGS1976

Problems in shallow land disposal of solid low-level radioactive waste in the united states

Disposal of solid low-level wastes containing radionuclides by burial in shallow trenches was initiated during World War II at several sites as a method of protecting personnel from radiation and isolating the radionuclides from the hydrosphere and biosphere. Today, there are 11 principal shallow-land burial sites in the United States that contain a total of more than 1.4 million cubic meters of solid wastes contaminated with a wide variety of radionuclides. Criteria for burial sites have been few and generalized and have contained only minimal hydrogeologic considerations. Waste-management practices have included the burial of small quantities of long-lived radionuclides with large volumes of wastes contaminated with shorter-lived nuclides at the same site, thereby requiring an assurance of extremely long-time containment for the entire disposal site. Studies at 4 of the 11 sites have documented the migration of radionuclides. Other sites are being studied for evidence of containment failure. Conditions at the 4 sites are summarized. In each documented instance of containment failure, ground water has probably been the medium of transport. Migrating radionuclides that have been identified include 90 Sr, 137 Cs, 106 Ru, 239 Pu, 125 Sb, 60 Co, and 3 H. Shallow land burial of solid wastes containing radionuclides can be a viable practice only if a specific site satisfies adequate hydrogeologic criteria. Suggested hydrogeologic criteria and the types of hydrogeologic data necessary for an adequate evaluation of proposed burial sites are given. It is mandatory that a concomitant inventory and classification be made of the longevity, and the physical and chemical form of the waste nuclides to be buried, in order that the anticipated waste types can be matched to the containment capability of the proposed sites. Ongoing field investigations at existing sites will provide data needed to improve containment at these sites and help develop hydrogeologic criteria for new sites. These studies have necessitated the development of special drilling, sampling, well construction, and testing techniques. A recent development in borehole geophysical techniques is downhole spectral gammaray analysis which not only locates but identifies specific radionuclides in the subsurface. Field investigations are being supplemented by laboratory studies of the hydrochemistry of the transuranic elements, the kinetics of solid-liquid phase interactions, and the potential complexing of radionuclides with organic compounds and solvents which mobilize normally highly sorbable nuclides. Theoretical studies of digital predictive solute transport models are being implemented to assure their availability for application to problems and processes identified in the field and laboratory.

Bulletin of the International Association of Engin↗
USGS1969

Great Salt Lake, Utah: Chemical and physical variations of the brine, 1963-1966

Great Salt Lake is a shallow, closed-basin lake in northern Utah. Its surface area and concentration of dissolved solids vary in response to both annual and long-term climatic changes. The lake gains water mainly as streamflow from mountains to the east and loses water through evaporation. In 1965, at a lake-surface altitude of 4,194 feet, the surface area was about 1,000 square miles, and the maximum measured depth was 27 feet. Studies to define the variations in chemical and physical characteristics of the brine began in 1963, and detailed sampling of the lake at 29 sites was made in October 1965 and May 1966. Data resulting from concurrent sampling of the 29 sites indicated that four types of brine coexist in the lake.

Utah↗
USGS1962

Water production from oil wells of the Uinta Basin, Uintah and Duchesne Counties, Utah

Water production from individual oil wells in the Uinta Basin ranges from 0 to 2,920,000 barrels (about 380 acre-feet) per year. The total dissolved solids in the water ranges from 500 to 26,000 ppm (parts per million); thus some of the water is classified as fresh and can be used, whereas the highly mineralized water, a minor percentage of the total water produced in the Uinta Basin, must be disposed of to prevent pollution of local fresh-water supplies.

Utah↗
USGS1963

Ground-water conditions in the southern and central parts of the East Shore area, Utah, 1953-61

The East Shore area is in north-central Utah between the Wasatch Range and Great Salt Lake, and it has been divided into the Bountiful, Weber Delta, and Brigham ground-water districts, from south to north. The area described in this report includes the Bountiful and Weber Delta districts and the southernmost part of the Brigham district. Long-term mean annual precipitation at Ogden is 17.07 inches, and the average annual temperature over the area is about 50°F. The population of the project area increased by 54 per cent from 1950 to 1960 and should increase rapidly in the future.

Utah↗
USGS1963

Hydrogeologic reconnaissance of part of the headwaters area of the Price River, Utah

The area investigated comprises 33 square miles in the Price River drainage basin ad is in the High Plateaus section of Utah. Precipitation on most of the area ranges from about 20 to 23 inches per year, and the average annual precipitation for the entire area was assumed to be 22 inches, of which approximately 65 percent is lost by evapotranspiration. The geologic formations underlying the area are the Blackhawk and Price River Formations of Cretaceous age, the North Horn Formation of Cretaceous and Tertiary age, the Flagstaff Limestone and Colton Formation of tertiary age, and unconsolidated deposits of probable Quaternary age. Some ground water issues from springs and seeps and is used by stock and the cities of Price and Helper. The annual discharge from the springs and seeps in the area averages about 3,000 acre-feet. Two deep wells supply about 400 acre-feet per year for use at a steam-generating plant. The aquifers penetrated by the wells are in the Flagstaff Limestone and the North Horn formation, the deepest aquifer being about 1,500 feet below the land surface. Most of the ground water in the area is suitable for municipal and industrial use. The surface discharge from the area is approximately 6,000 acre-feet per year. By means of a water budget, it is calculated that approximately 4,000 acre-feet per year leaves the area by subsurface flow. Further development of ground water on a large scale can be accomplished only by the use of wells. It is possible, however, that part of any newly developed supply from wells may be drawn from existing spring discharge or streamflow.

Utah↗
USGS1964

Geology and ground-water resources of the Jordan Valley, Utah

The Jordan Valley occupies about 400 square miles in the central part of Salt Lake County in north-central Utah. Salt Lake City, the capital of Utah, is in the northeastern part of the valley. The valley is at the eastern margin of the Basin and range physiographic province, and it is bounded on the northeast, east, south, and west by mountain ranges. The valley is drained by the Jordan River which enters through a water gap in the mountains to the south, flows north, and empties into the Great Salt Lake, which forms the northwestern border of the valley.

Utah↗