USGS Science⌕ Search

SEARCH · USGS Science

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,171 records · Page 65Linked to original sources

Flood geomorphology of Arthurs Rock Gulch, Colorado: paleoflood history

Episodic late Quaternary flooding is recorded by bouldery deposits and slackwater sediments along Arthurs Rock Gulch, an ephemeral stream west of Fort Collins, Colorado. Flood deposits consist of individual granodiorite and pegmatite boulders, boulder bars, and coarse overbank sediment that rest on erosional terrace segments along the channel. We identified evidence for at least five flood in the lower two thirds of the 1.84 km 2 drainage basin. Flood deposits are differentiated by their position above the active channel, weathering characteristics, degree of boulder burial by colluvium, amount of lichen cover, and position with respect to terrace and colluvial deposits. Age estimates for the flood deposits are based on radiocarbon dating, tree-ring analyses, and relative-age criteria from four sites in the basin. At least two floods occurred in the last 300 years; a third flood is at least 5000 years old, but likely younger than 10,000 yr BP; and the two oldest floods occurred at least 40,000 years BP.

Geomorphology↗

Late cenozoic subduction complex of Sicily

Besides remnants of Hercynian deformations in the Peloritani nappe and of pre-Oligocene Alpine structures in the Troiani nappe, most compressive structures observed in the Sicilian accretionary wedge result from the late Cenozoic (Tortonian to Present) continental subduction of the Apulia (Iblei) block, and are thus synchronous with distensive structures related to the opening of the Tyrrhenian Sea. Syntectonic deposits fill southward-migrating foredeeps in a sequential fashion, and the dating of these deposits helps to constrain the timing of deformation. Similarly, Plio-Quaternary sediments, eroded from the accreted units, rest on top of the allochthon in either compressive piggy-back depressions or extensional basins. The age and configuration of these overlap deposits constrain our reconstructions of the subsurface geometry of the underlying peri-Tyrrhenian detachment faults or S-verging thrust-faults. Post-depositional erosion, normal faulting and syntectonic filling of basins contribute to maintaining the critical taper of the prism, whose geometry is continuously altered owing to frontal accretion, underplating and isostatic uplift.

Journal of Structural Geology↗

Segmentation and the coseismic behavior of basin and range normal faults. Examples from east-central Idaho and southwestern Montana, USA

The range-front normal faults of the Lost River and Lemhi Ranges, and the Beaverhead and Tendoy Mountains in east-central Idaho and southwestern Montana have well-preserved fault scarps on Quaternary deposits along much of their lengths. Fault-scarp morphology, the age of deposits displaced by the faults, and the morphology of the range fronts provide a basis for dividing the faults into segments that are typically 20-25 km long. Four characteristics are recognized that help to identify segment boundaries: (1) major en echelon offsets or pronounced gaps in the continuity of fault scarps; (2) distinct, persistent, along-strike changes in fault-scarp morphology that indicate different ages of faulting; (3) major salients in the range front; and (4) transverse bedrock ridges where the cumulative throw is low compared to other places along the fault zone. Only features whose size is measured on the scale of kilometers are regarded as significant enough to represent a segment boundary that could inhibit or halt a propagating rupture. The ability to identify segments of faults that are likely to behave as independent structural entities will improve seismic-hazard assessment. However, one should not assume that the barriers at segment boundaries will completely stop all propagating ruptures.

Journal of Structural Geology↗

Stratigraphic and palaeoenvironmental summary of the south-east Georgia embayment: a correlation of exploratory wells

A Continental Offshore Stratigraphic Test (COST) well and six exploratory wells have been drilled in the south-east Georgia embayment. The oldest rocks penetrated are weakly metamorphosed Lower Ordovician quartz arenites and Silurian shales and argillites in the Transco 1005-1 well and Upper Devonian argillites in the COST GE-1 well. These marine strata, which are equivalent to the Tippecanoe sequence in Florida, underlie the post-rift unconformity and represent part of a disjunct fragment of Gondwana that was sutured to the North American craton during the late Palaeozoic Alleghanian orogeny. The Palaeozoic strata are unconformably overlain by interbedded non-marine Jurassic (Bajocian and younger) sandstones and shales and marginal marine Lower Cretaceous sandstones, calcareous shales and carbonates, which contain scattered beds of coal and evaporite. Together, these rocks are stratigraphically equivalent to the onshore Fort Pierce and Cotton Valley(?) Formations and rocks of the Lower Cretaceous Comanchean Provincial Series. The abundance of carbonates and evaporites in this interval, which reflects marine influences within the embayment, increases upwards, eastwards and southwards. The Upper Cretaceous part of the section is composed mainly of neritic calcareous shales and shaley limestones stratigraphically equivalent to the primarily marginal marine facies of the onshore Atkinson, Cape Fear and Middendorf Formations and Black Creek Group, and to limestones and shales of the Lawson Limestone and Peedee Formations. Cenozoic strata are primarily semiconsolidated marine carbonates. Palaeocene to middle Eocene strata are commonly cherty; middle Miocene to Pliocene strata are massive and locally phosphatic and glauconitic; Quaternary sediments are dominated by unconsolidated carbonate sands. The effects of eustatic changes and shifts in the palaeocirculation are recorded in the Upper Cretaceous and Tertiary strata.

Georgia↗

Chemical composition and distribution of lithium-rich brines in salar de Uyuni and nearby salars in southwestern Bolivia

Preliminary investigations at Salar de Uyuni and the nearby salars (salt pans) of Coipasa and Empexa in the southern part of the Bolivian Altiplano show the presence of widespread lithium-rich brines. Widely scattered brine samples from Salar de Uyuni, which has an area of about 9000 km 2 and is the largest salt pan on earth, show lithium values ranging from 80 to 1500 ppm. High values of 300–700 ppm are most prevalent in an area of about 2500 km 2 in the east-central and southeastern part of the salar. A few brine samples in small areas in Coipasa and Empexa Salars have values ranging from 170 to 580 ppm Li. All the brines are essentially saturated with halite and are moderately high in sulfate (5000–15,000 ppm SO 4 ) but low in carbonate (<500 ppm HCO 3 ). Potassium and magnesium values are relatively high, chiefly in the range of 2000–20,000 ppm, and the K Mg "> KMg ratio is about 1:1. The Li K "> LiK and Li Mg "> LiMg ratios are relatively constant at about 1:20. The crystalline saline material and brines in these salars are residual from a former large lake, Lago Minchin, that occupied much of the southern Bolivian Altiplano during late Pleistocene time, augmented by saline material carried to the salars by streams since final drying of this lake. Thermal springs associated with rhyolitic volcanic rocks of Quaternary age may have been a major source of the lithium.

Energy↗

Geology of kilauea volcano

This paper summarizes studies of the structure, stratigraphy, petrology, drill holes, eruption frequency, and volcanic and seismic hazards of Kilauea volcano. All the volcano is discussed, but the focus is on its lower cast rift zone (LERZ) because active exploration for geothermal energy is concentrated in that area. Kilauea probably has several separate hydrothermal-convection systems that develop in response to the dynamic behavior of the volcano and the influx of abundant meteoric water. Important features of some of these hydrothermal-convection systems are known through studies of surface geology and drill holes. Observations of eruptions during the past two centuries, detailed geologic mapping, radiocarbon dating, and paleomagnetic secular-variation studies indicate that Kilauea has erupted frequently from its summit and two radial rift zones during Quaternary time. Petrologic studies have established that Kilauea erupts only tholeiitic basalt. Extensive ash deposits at Kilauea's summit and on its LERZ record locally violent, but temporary, disruptions of local hydrothermal-convection systems during the interaction of water or steam with magma. Recent drill holes on the LERZ provide data on the temperatures of the hydrothermal-convection systems, intensity of dike intrusion, porosity and permeability, and an increasing amount of hydrothermal alteration with depth. The prehistoric and historic record of volcanic and seismic activity indicates that magma will continue to be supplied to deep and shallow reservoirs beneath Kilauea's summit and rift zones and that the volcano will be affected by eruptions and earthquakes for many thousands of years. ?? 1993.

Geothermics↗

The compositionally zoned eruption of 1912 in the Valley of Ten Thousand Smokes, Katmai National Park, Alaska

On June 6–8, 1912, ∼ 15 km 3 of magma erupted from the Novarupta caldera at the head of the Valley of Ten Thousand Smokes (VTTS), producing ∼ 20 km 3 of air-fall tephra and 11–15 km 3 of ash-flow tuff within ∼ 60 hours. Three discrete periods of ash-fall at Kodiak correlate, respectively, with Plinian tephra layers designated A, CD, and FG by Curtis (1968) in the VTTS. The ash-flow sequence overlapped with but outlasted pumice fall A, terminating within 20 hours of the initial outbreak and prior to pumice fall C. Layers E and H consist mostly of vitric dust that settled during lulls, and Layer B is the feather edge of the ash flow. The fall units filled and obscured the caldera, but arcuate and radial fissures outline a 6-km 2 depression. The Novarupta lava dome and its ejecta ring were emplaced later within the depression. At Mt. Katmai, 10 km east of the 1912 vent, a 600-m-deep caldera of similar area also collapsed at about this time, probably owing to hydraulic connection with the venting magma system; but all known ejecta are thought to have erupted at Novarupta. Mingling of three distinctive magmas during the eruption produced an abundance of banded pumice, and mechanical mixing of chilled ejecta resulted in deposits with a wide range of bulk composition. Pumice in the initial fall unit (A) is 100% rhyolite, but fall units atop the ash flow are > 98% dacite; black andesitic scoria is common only in the ash flows and in near-vent air-fall tephra. Pumice counts show the first half of the ash-flow deposit to be 91–98% rhyolite, but progressive increases of dacite and andesite eventually reduced the rhyolitic component to < 2%. The later, rhyolite-poor flows were hotter, less mobile, and widely produced partially welded tuff and vapor-indurated sillar. The main ash flow was too deflated and sluggish 16 km from the vent to surmount a 25-m-high moraine in its path but was diverted around it and continued 5 km down-valley, engulfing and charring trees but not toppling all of them. Thin ash-flow veneers feather 30–40 m up the enclosing valley walls but only where a constriction in the central VTTS locally raised the flow level. In the upper VTTS, the “high sand mark” is not a veneer but a marginal bench formed in thick tuff by differential compaction. Flooding from adjacent glaciers led to phreatic explosions that ejected blocks of tuff more welded than any yet exposed. A cluster of phreatic craters dammed a lake atop the tuff, the breaching of which caused a flood that scoured the ash-flow surface in the central VTTS, transported 50-cm blocks of welded tuff > 20 km to the lowermost VTTS, and deposited 1–8 m of debris there. Rhyolitic ejecta contain only 1–2% phenocrysts but andesite and dacite have 30–45%. Quartz is present and augite absent only in the rhyolite, but all ejecta contain plagioclase, orthopyroxene, titanomagnetite, ilmenite, apatite, and pyrrhotite; rare olivine occurs in the andesite. The zoning ranges of phenocrysts in the rhyolitic and intermediate ejecta do not overlap. New chemical data show the bulk SiO 2 range to be: rhyolite 77 ± 0.6, dacite 66-64.5, and andesite 61.5–58.5%. The dacitic and andesitic ejecta contrast in color and density, and it is not certain whether they form a compositional continuum. Analyses reported by Fenner within the 66–76% SiO 2 range were of banded pumice and lava and of bulk tephra that mechanically fractionated and mixed during flight. Despite the gap of 10% SiO 2 , Fe-Ti-oxide temperatures show a continuous range from rhyolite (805–850°C) through dacite (855–955°C) to andesite (955–990°C). Thermal continuity and isotopic and trace-element data suggest that all were derived from a single magmatic system, whether or not they were physically contiguous before eruption. If the rhyolitic liquid separated from dacitic magma, extraction was so efficient that no dacitic phenocrysts were retained and no bulk compositions in the range 66–76% SiO 2 were created; if it were a partial melt of roof rocks atop an intermediate magma body, then such rocks had no O- or Sr-isotopic contrast with the andesite-dacite magma and clearly did not include the Jurassic arkosic or granitic basement. The presence of Holocene domes of pre-1912 glassy dacite adjacent to the 1912 vent suggest that the 7 km 3 (or more) of high-silica rhyolitic magma (a composition rare in the Aleutian arc) was generated in less than a few thousand years. The 1912 vent is semi-encircled by several andesitic stratocones and is as close to Mageik, Trident, and Griggs volcanoes as it is to Mt. Katmai. The erupted magma probably occupied only shallow levels of an extensive system of injection and storage under a cluster of several stratovolcanoes. Although Quaternary basalt is not known to have erupted here, the intrusion of basaltic magma probably sustains the greater-VTTS magmatic system.

Alaska↗

Neogene biostratigraphy and paleoenvironments of Enewetak Atoll, equatorial Pacific Ocean

Micropaleontologic analyses of Neogene sediments from Enewetak Atoll, Marshall Islands, provide data on the age of lagoonal deposits, stratigraphic disconformities and the paleoenvironmental and subsidence history of the atoll. Benthic foraminifers, planktic foraminifers, calcareous nannofossils and ostracodes were studied from six boreholes, the deepest penetrating 1605 feet below the lagoon floor into upper Oligocene strata. The Oligocene-Miocene boundary occurs at about 1200 ft below the lagoon floor. The early and middle Miocene is characterized by brief periods of deposition and numerous hiatuses. Ostracodes and benthic foraminifers indicate a shallow-marine reefal environment with occasional brackish water conditions. Upper Miocene and lower Pliocene deposits placed in calcareous nannofossil Zones NN9-15 and in planktic foraminifer Zones N16-19 contain species-rich benthic microfaunas which indicate alternating reefal and brackish water mangrove environments. The upper Pliocene contains at least two major depositional hiatuses that coincide with a major faunal turnover in benthic foraminiferal and ostracode assemblages. The Quaternary is characterized by benthic microfaunas similar to those of modern atoll lagoons and is punctuated by at least 11 disconformities which signify periods of low sea level. Atoll subsidence rates during the last 10 Ma averaged 30 to 40 m/m.y. ?? 1991 Elsevier Science Publishers B.V. All rights reserved.

Marine Micropaleontology↗

Stratigraphic significance of siliceous microfossils collected during NAUTIPERC dives (off Peru, 5 °-6°S)

The geological evolution of the northern Peru convergent margin can be traced using samples collected during deep-sea dives of the submersible Nautile . In the Paita area (5°–6°S), the sedimentary sequence was intensively sampled along the main scarp of the middle slope area. It consists of Upper Miocene (7–9 Ma) to Pleistocene siltstone, sandstone and rare dolostone. The age distribution of these samples is the basis for a new geologic interpretation of the multichannel seismic line CDP3. Siliceous microfossils (both diatoms and radiolarians) show influence of both cold and temperature waters (local species mixed with upwelling ones). Diatom assemblages studied from the NP1-13 and NP1-15 dives bear a strong resemblance to assemblages from the Pisco Formation of southern Peru. Micropaleontological data from siliceous microfossils, provide evidence for two main unconformities, one is at the base of the Quaternary sequence and the other corresponds to a hiatus of 1 Myr, separating the Upper Miocene (7–8 Ma) sediments from uppermost Miocene (5–6 Ma) sediments. During the past 400 kyr, a wide rollover fold developed in the middle slope area associated with a major seaward dipping detachment fault. A catastrophic debris a valanche occurred as the results of an oversteepening of the landward flank of the rollover fold. The gravity failure of the slope, recognized by SeaBEAM and hydrosweep mapping, displaced enough material to produce a destructive tsunami which occurred 13.8 ± 2.7 kyr ago.

Pacific Ocean↗

Uranium series disequilibrium in a young surficial uranium deposit, northeastern Washington, U.S.A.

A recently discovered ore-grade accumulation of U in organic-rich sediments of late Quaternary age provides an opportunity for studying the early association of U, U-daughters, and organic matter in a natural setting. The U occurs in valley-fill sediments of peat, peaty clay, silt, and sand along the north fork of Flodelle Creek, Stevens County, Washington. Radiometric techniques (delayed neutron, high-resolution gamma-ray spectrometry, thin-source alpha spectrometry) were employed to determine the abundance and distribution of U-series nuclides, the extent of secular equilibrium within the U decay series, and the apparent U-series ages of U incorporation. Sixteen lithologically distinct intervals were sampled from a 292 cm core. Uranium contents range from 140 to 2790 ppm and are positively correlated with organic contents. Measured alpha activity ratios of 234 U/ 238 U (1.31–1.38) are very similar to those reported in coexisting waters, suggesting a rather constant isotopic composition of introduced U. Much lower Th contents of <10–40 ppm are controlled by the type and abundance of silicate detritus. The youth of the host sediments (<15 000 a) and the paucity of associated radioactivity suggested large excesses of U relative to radioactive daughters and such excesses were observed, particularly in the shallowest intervals. Apparent ages of U emplacement determined by the (alpha) activity ratio of 230 Th daughter to 234 U parent show a general increase with depth and fair agreement with estimated depositional ages. This observation suggests dominantly syndepositional or early post depositional emplacement of U followed by decay-generated buildup of 230 Th daughter with time. However, interval by interval comparisons of the relative abundances of other daughters, particularly 226 Ra and 210 Pb, indicate variability caused by processes other than closed-system growth and decay, probably because chemically diverse daughters that are decay-generated in situ have differing mobilities and because upwelling ground water continuously adds more U and minor amounts of daughters. If 230 Th is considered the least susceptible to these modifications, the data suggest some addition of 234 U in the deepest intervals and some loss of 226 Ra and/or gain of 222 Rn throughout the studied core.

Washington↗

Loess records

Loess is an eolian deposit, composed mainly of silt grains, which can be identified in the field as a distinct sedimentary body. It covers a significant portion of the land surface of the Earth and is one of the most important terrestrial archives of long-term dust deposition. Loess appears on almost all continents, and ranges in thickness up to several hundred of meters. Most loess sequences include buried soils (paleosols), alternating with unaltered loess layers. As the formation of loess is controlled, at least partly, by climate, alternating loess deposits and buried soils hold valuable information of Quaternary climatic and environmental conditions, especially of past wind regimes.

Book chapter↗

The Bear River's history and diversion: Constraints, unsolved problems, and implications for the Lake Bonneville record: Chapter 2

The shifting course of the Bear River has influenced the hydrologic balance of the Bonneville basin through time, including the magnitude of Lake Bonneville. This was first recognized by G.K. Gilbert and addressed in the early work of Robert Bright, who focused on the southeastern Idaho region of Gem Valley and Oneida Narrows. In this chapter, we summarize and evaluate existing knowledge from this region, present updated and new chronostratigraphic evidence for the Bear River's drainage history, and discuss implications for the Bonneville record as well as future research needs. The Bear River in Plio-Pleistocene time joined the Snake River to the north by following the present-day Portneuf or Blackfoot drainages, with it likely joining the Portneuf River by middle Pleistocene time. An episode of volcanism in the Blackfoot-Gem Valley volcanic field, sparsely dated to ~ 100–50 ka, diverted the Bear River southward from where the Alexander shield volcano obstructed the river's path into Gem Valley. Previous chronostratigraphic and isotopic work on the Main Canyon Formation in southern Gem Valley indicates internal-basin sedimentation during the Quaternary, with a possible brief incursion of the Bear River ~ 140 ka. New evidence confirms that the Bear River's final diversion at 60–50 ka led to its integration into the Bonneville basin by spillover at a paleo-divide above present-day Oneida Narrows. This drove rapid incision before the rise of Lake Bonneville into the canyon and southern Gem Valley. Bear River diversion at 60–50 ka coincides with the end of the Cutler Dam lake cycle, at the onset of marine isotope stage 3. The Bear River subsequently contributed to the rise of Lake Bonneville, the highest pluvial lake known in the basin, culminating in the Bonneville flood. Key research questions include the prior path of the upper Bear River, dating and understanding the complex geologic relations within the Gem Valley-Blackfoot volcanic field, resolving evidence for possible earlier incursions of Bear River water into the Bonneville basin, and interpreting the sedimentology of the Main Canyon Formation.

Book chapter↗

Radiocarbon dating loess deposits in the Mississippi Valley using terrestrial gastropod shells (Polygyridae, Helicinidae, and Discidae)

Small terrestrial gastropod shells (mainly Succineidae) have been used successfully to date late Quaternary loess deposits in Alaska and the Great Plains. However, Succineidae shells are less common in loess deposits in the Mississippi Valley compared to those of the Polygyridae, Helicinidae, and Discidae families. In this study, we conducted several tests to determine whether shells of these gastropods could provide reliable ages for loess deposits in the Mississippi Valley. Our results show that most of the taxa that we investigated incorporate small amounts (1&ndash;5%) of old carbon from limestone in their shells, meaning that they should yield ages that are accurate to within a few hundred years. In contrast, shells of the genus Mesodon ( Mesodon elevatus and Mesodon zaletus ) contain significant and variable amounts of old carbon, yielding ages that are up to a couple thousand 14 C years too old. Although terrestrial gastropod shells have tremendous potential for 14 C dating loess deposits throughout North America, we acknowledge that accuracy to within a few hundred years may not be sufficient for those interested in developing high-resolution loess chronologies. Even with this limitation, however, 14 C dating of terrestrial gastropod shells present in Mississippi Valley loess deposits may prove useful for researchers interested in processes that took place over multi-millennial timescales or in differentiating stratigraphic units that have significantly different ages but similar physical and geochemical properties. The results presented here may also be useful to researchers studying loess deposits outside North America that contain similar gastropod taxa..

Mississippi Valley↗

Geochemical evidence for seasonal controls on the transportation of Holocene loess, Matanuska Valley, southern Alaska, USA

Loess is a widespread Quaternary deposit in Alaska and loess accretion occurs today in some regions, such as the Matanuska Valley. The source of loess in the Matanuska Valley has been debated for more than seven decades, with the Knik River and the Matanuska River, both to the east, being the leading candidates and the Susitna River, to the west, as a less favorable source. We report here new stratigraphic, mineralogic, and geochemical data that test the competing hypotheses of these river sources. Loess thickness data are consistent with previous studies that show that a source or sources lay to the east, which rules out the Susitna River as a source. Knik and Matanuska River silts can be distinguished using Sc–Th–La, La N /Yb N vs. Eu/Eu ∗ , Cr/Sc, and As/Sb. Matanuska Valley loess falls clearly within the range of values for these ratios found in Matanuska River silt. Dust storms from the Matanuska River are most common in autumn, when river discharge is at a minimum and silt-rich point bars are exposed, wind speed from the north is beginning to increase after a low-velocity period in summer, snow depth is still minimal, and soil temperatures are still above freezing. Thus, seasonal changes in climate and hydrology emerge as critical factors in the timing of aeolian silt transport in southern Alaska. These findings could be applicable to understanding seasonal controls on Pleistocene loess accretion in Europe, New Zealand, South America, and elsewhere in North America.

Alaska↗

Controls on rind thickness on basaltic andesite clasts weathering in Guadeloupe

A clast of low porosity basaltic andesite collected from the B horizon of a soil developed on a late Quaternary volcaniclastic debris flow in the Bras David watershed on Basse-Terre Island, Guadeloupe, exhibits weathering like that observed in many weathered clasts of similar composition in other tropical locations. Specifically, elemental profiles measured across the core-rind interface document that primary minerals and glass weather to Fe oxyhydroxides, gibbsite and minor kaolinite in the rind. The earliest reaction identified in the core is oxidation of Fe in pyroxene but the earliest reaction that creates significant porosity is plagioclase dissolution. Elemental loss varies in the order Ca???Na>K???Mg>Si>Al>Fe???P??Ti, consistent with the relative reactivity of phases in the clast from plagioclase???pyroxene???glass>apatite>ilmenite. The rind surrounds a core of unaltered material that is more spherical than the original clast. The distance from the core-rind boundary to a visually prominent rind layer, L, was measured as a proxy for the rind thickness at 36 locations on a slab cut vertically through the nominal center of the clast. This distance averaged 24.4??3.1mm. Maximum and minimum values for L, 35.8 and 20.6mm, were observed where curvature of the core-rind boundary is greatest (0.12mm-1) and smallest (0.018mm-1) respectively. Extrapolating from other rinds in other locations, the rate of rind formation is estimated to vary by a factor of about 2 (from ~4 to 7??10-14ms-1) from low to high curvature. The observation of a higher rate of rind formation for a higher curvature interface is consistent with a diffusion-limited model for weathering rind formation. The diffusion-limited model predicts that, like rind thickness, values of the thickness of the reaction front (h) for a given reaction, defined as the zone over which a parent mineral such as plagioclase completely weathers to rind material, should also increase with curvature. Values of h were quantified as a function of interface curvature using bulk chemical analysis (500<h<2000??m). Values of h were also quantified by measuring loss of matrix glass and increase in porosity as a function of curvature. In contrast to rind thickness, h shows no consistent increase with curvature. This contradiction is attributed to the mm-scale roughness of the interface which is related to phenocryst grain size. Therefore, the overall rind formation rate is strongly affected by curvature measured at the scale of the clast, while mineral reaction rates documented by reaction front thickness are strongly affected by curvature at the scale of phenocrysts. Similarly, the weathering advance rate (ms-1) for the entire Bras David watershed can be extrapolated from the clast weathering rate if roughness at the watershed scale equals values of approximately 400-800. ?? 2010 Elsevier B.V.

Chemical Geology↗

Barite-forming environments along a rifted continental margin, Southern California Borderland

The Southern California Continental Borderland (SCCB) is part of the broad San Andreas transform-fault plate boundary that consists of a series of fault-bounded, petroleum-generating basins. The SCCB has high heat flow and geothermal gradients produced by thinned continental crust and Neogene volcanism. Barite deposits in the SCCB occur along faults. Barite samples from two sea-cliff sites and four offshore sites in the SCCB were analyzed for mineralogy, chemical (54 elements) and isotopic (S, Sr) compositions, and petrography. Barite from Palos Verdes (PV) Peninsula sea-cliff outcrops is hosted by the Miocene Monterey Formation and underlying basalt; carbonate rocks from those outcrops were analyzed for C, O, and Sr isotopes and the basalt for S isotopes. Cold-seep barite from Monterey Bay, California was analyzed for comparison. SCCB offshore samples occur at water depths from about 500 to 1800 m. Those barites vary significantly in texture and occurrence, from friable, highly porous actively growing seafloor mounds to dense, brecciated, vein barite. This latter type of barite contrasts with cold-seep barite in being much more coarse grained, forms thick veins in places, and completely replaced rock clasts in breccia. The barite samples range from 94 to 99 wt% BaSO4, with low trace-element contents, except for high Sr, Zr, Br, U, and Hg concentrations compared to their crustal abundances. δ34S for SCCB offshore barites range from 21.6‰ to 67.4‰, and for PV barite from 62‰ to 70‰. Pyrite from PV sea-cliff basalt and sedimentary rocks that host the barites averages 7.8‰ and 2.2‰, respectively. Two offshore barite samples have δ34S values (21.6‰, 22.1‰) close to that of modern seawater sulfate, whereas all other samples are enriched to strongly enriched in 34S. 87Sr/86Sr ratios for the barites vary over a narrow range of 0.70830–0.70856 and are much lower than that of modern seawater and also lower than the middle Miocene seawater ratio, the time of deposition of the host rocks for the PV samples. This indicates that the mineralizing fluids were not unaltered seawater. We develop a model in which the barites precipitated both below the sediment–water interface and at the seafloor from low-temperature fluids that circulated along faults. The isotopic, chemical, and textural data indicate that the barites formed by several processes. Mesozoic and Cenozoic basement rocks (crystalline and overlying sedimentary rocks), Quaternary basin fill, turbidite fans, and seawater provided various elements for the barites in different environments. The fluids had a deep-seated source and were hydrothermal in the deeper parts of the system for all the barite types, including the seafloor cold-seep deposit, based on Sr isotopes and regional geothermal gradients. These deep-seated fluids mixed with other fluids as they ascended, including seawater at and near the seafloor. The high δ34S values may have resulted from extreme Rayleigh fractionation during bacterially mediated (semi)closed-system sulfate reduction, probably driven by the flux of methane- and hydrocarbon-bearing fluids through basement rocks and basin sediments. Early diagenetic dolomite and pyrite in the host Monterey Formation in the PV Headland also formed in a zone of sulfate reduction, but within sediment buried only centimeters to a few meters and with a predominantly seawater source for the sulfur. Dolomite occurring with vein barite in the PV Headland formed at temperatures in the range of 40–90 °C. The cold-seep barites have δ34S values near that of modern seawater, although still somewhat fractionated. The barites that precipitated below the sediment–water interface have higher δ34S values, suggesting that the fluids were relatively reduced with molar dissolved barium in excess of dissolved sulfate. Those samples were exposed at the seafloor by uplift along faults and are composed predominantly of massive, brecciated, and vein barite.

California↗

Desert wetlands in the geologic record

Desert wetlands support flora and fauna in a variety of hydrologic settings, including seeps, springs, marshes, wet meadows, ponds, and spring pools. Over time, eolian, alluvial, and fluvial sediments become trapped in these settings by a combination of wet ground conditions and dense plant cover. The result is a unique combination of clastic sediments, chemical precipitates, and organic matter that is preserved in the geologic record as ground-water discharge (GWD) deposits. GWD deposits contain information on the timing and magnitude of past changes in water-table levels and, therefore, are a potential source of paleohydrologic and paleoclimatic information. In addition, they can be important archeological and paleontological archives because desert wetlands provide reliable sources of fresh water, and thus act as focal points for human and faunal activities, in some of the world's harshest and driest lands. Here, we review some of the physical, sedimentological, and geochemical characteristics common to GWD deposits, and provide a contextual framework that researchers can use to identify and interpret geologic deposits associated with desert wetlands. We discuss several lines of evidence used to differentiate GWD deposits from lake deposits (they are commonly confused), and examine how various types of microbiota and depositional facies aid in reconstructing past environmental and hydrologic conditions. We also review how late Quaternary GWD deposits are dated, as well as methods used to investigate desert wetlands deeper in geologic time. We end by evaluating the strengths and limitations of hydrologic and climatic records derived from GWD deposits, and suggest several avenues of potential future research to further develop and utilize these unique and complex systems.

Earth-Science Reviews↗

Late Pleistocene granodiorite source for recycled zircon and phenocrysts in rhyodacite lava at Crater Lake, Oregon

Rhyodacite tephra and three lavas erupted ∼27 ka, interpreted to be early leaks from the climactic magma chamber of Mount Mazama, contain ubiquitous resorbed crystals (antecrysts) that were recycled from young granodiorite and related plutonic rocks of the same magmatic system. The shallow composite pluton is represented by blocks ejected in the 7.7-ka climactic eruption that formed Crater Lake caldera. Plagioclase crystals in both rhyodacite and granodiorites commonly have cores with crystallographically oriented Fe-oxide needles exsolved at subsolidus conditions. At least 80% of plagioclase crystals in the rhyodacite are antecrysts derived from plutonic rocks. Other crystals in the rhyodacite, notably zircon, also were recycled. SIMS 238 U– 230 Th dating indicates that zircons in 4 granodiorite blocks crystallized at various times between ∼20 ka and ≥ 300 ka with concentrations of analyses near 50–70, ∼110, and ∼200 ka that correspond to periods of dacitic volcanism dated by K–Ar. U–Th ages of zircon from a rhyodacite sample yield similar results. No analyzed zircons from the granodiorite or rhyodacite are pre-Quaternary. Zircon minimum ages in blocks from different locations around the caldera reflect ages of nearby volcanic vents and may map the distribution of intrusions within a composite pluton. Survival of zircon in zircon-undersaturated hydrous magma and of Fe-oxide needles in plagioclase suggests that little time elapsed from entrainment of antecrysts to the ∼27-ka eruption of the rhyodacite. The ∼27-ka rhyodacite is an example of young silicic magma that preserved unstable antecrysts from a known source early during growth of a large high-level magma chamber. In contrast, the voluminous 7.7-ka climactic rhyodacite pumice is virtually lacking in zircon, indicating dissolution of any granodioritic debris in the intervening period. Mineralogical evidence of assimilation may be destroyed in hot, vigorously growing silicic magma bodies such as ultimately produced the climactic eruption of Mount Mazama.

Oregon↗