USGS ScienceSearch

USGS · 70012613

Chemical composition and distribution of lithium-rich brines in salar de Uyuni and nearby salars in southwestern Bolivia

Abstract

Preliminary investigations at Salar de Uyuni and the nearby salars (salt pans) of Coipasa and Empexa in the southern part of the Bolivian Altiplano show the presence of widespread lithium-rich brines. Widely scattered brine samples from Salar de Uyuni, which has an area of about 9000 km 2 and is the largest salt pan on earth, show lithium values ranging from 80 to 1500 ppm. High values of 300–700 ppm are most prevalent in an area of about 2500 km 2 in the east-central and southeastern part of the salar. A few brine samples in small areas in Coipasa and Empexa Salars have values ranging from 170 to 580 ppm Li. All the brines are essentially saturated with halite and are moderately high in sulfate (5000–15,000 ppm SO 4 ) but low in carbonate (<500 ppm HCO 3 ). Potassium and magnesium values are relatively high, chiefly in the range of 2000–20,000 ppm, and the K Mg "> KMg ratio is about 1:1. The Li K "> LiK and Li Mg "> LiMg ratios are relatively constant at about 1:20. The crystalline saline material and brines in these salars are residual from a former large lake, Lago Minchin, that occupied much of the southern Bolivian Altiplano during late Pleistocene time, augmented by saline material carried to the salars by streams since final drying of this lake. Thermal springs associated with rhyolitic volcanic rocks of Quaternary age may have been a major source of the lithium.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: -22.86143250427375° to -15.77242071756875° latitude; -69.70525126273051° to -62.300293473521776° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

George E. Ericksen, James D. Vine, Raul Ballon A.. 1978. Chemical composition and distribution of lithium-rich brines in salar de Uyuni and nearby salars in southwestern Bolivia. https://doi.org/10.1016/0360-5442(78)90032-4

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Reducing energy-related CO 2 emissions using accelerated weathering of limestone

The use and impacts of accelerated weathering of limestone (AWL; reaction: CO 2 +H 2 O+CaCO 3 →Ca 2+ +2(HCO 3 - ) is explored as a CO 2 capture and sequestration method. It is shown that significant limestone resources are relatively close to a majority of CO 2 -emitting power plants along the coastal US, a favored siting location for AWL. Waste fines, representing more than 20% of current US crushed limestone production (>10 9 tonnes/yr), could provide an inexpensive or free source of AWL carbonate. With limestone transportation then as the dominant cost variable, CO 2 mitigation costs of $3-$4/tonne appear to be possible in certain locations. Perhaps 10–20% of US point–source CO 2 emissions could be mitigated in this fashion. It is experimentally shown that CO 2 sequestration rates of 10 -6 to 10 -5 moles/sec per m 2 of limestone surface area are achievable, with reaction densities on the order of 10 -2 tonnes CO 2 m -3 day -1 , highly dependent on limestone particle size, solution turbulence and flow, and CO 2 concentration. Modeling shows that AWL would allow carbon storage in the ocean with significantly reduced impacts to seawater pH relative to direct CO 2 disposal into the atmosphere or sea. The addition of AWL-derived alkalinity to the ocean may itself be beneficial for marine biota.

Energy

Lithium-bearing rocks of the Horse Spring Formation, Clark County, Nevada

The Horse Spring Formation of Miocene age in Clark County, Nevada, contains as much as 0.5% Li in individual samples. Rock sequences which average 0.1% Li range from 3 m thick near Gold Butte (south of Mesquite, Nev.) to as much as 40 m thick near Lava Butte (east of Las Vegas, Nev.) about 75 km to the west. The lithium-bearing beds are light colored to white and contain hectorite in a dolomite, magnesite, or calcite matrix. Varied amounts of gypsum, halite, celestite, clinoptilolite, quartz, feldspar, biolite and colemanite are also present locally. Hectorite is the only lithium mineral recognized to date. The lithium-rich rocks contain low concentrations of most other minor elements except that boron and strontium are enriched. Rarely, barium, arsenic, and zinc are present in anomalously large amounts. The lithium-enriched part of the Horse Spring Formation was formed from a series of volcanic ashes which were deposited in a playa. Relict volcanic ash is recognizable in thin sections as remnant glass shards and vitroclastic textures. Most of the original glass has been altered to clay minerals, carbonate minerals, or zeolites, presumably through interaction with highly saline pore waters. Abundant evidence of spring activity suggests that thermal waters played a part in releasing the lithium from volcanic materials.

Nevada

Lithium, a preliminary survey of its mineral occurrence in flint clay and related rock types in the United States

Maximum concentrations of lithium found in samples of flint clay and associated rocks of Pennsylvanian age in different States, in parts per million (ppm), are: Missouri, 5100; Pennsylvania-Maryland, 2100; Kentucky, 890; Ohio, 660; Alabama, 750; and Illinois, 160. Lithium-bearing kaolin deposits are distributed in the Coastal Plain province from New Jersey to Texas, and one occurs in Idaho; maximum lithium concentrations in samples from these deposits range from 64 to 180 ppm. The maximum concentration found in the Arkansas bauxite region is 460 ppm and that in flint clay in Colorado is 370 ppm. Samples from areas other than Pennsylvania, Maryland, Kentucky and Missouri are relatively few in number, represent mostly commercially valuable clays, and represent only a part of the refractory clay deposits in the United States. Data are not available on the clays associated with these deposits that may be unusable because they contain too much lithium as well as other deleterious elements. In both Pennsylvania and Missouri, lithium contents vary regionally between districts and locally between deposits. In samples containing more than 2000 ppm lithium, the lithium occurs in a dioctahedral chlorite mineral very similar to cookeite, which previously has not been recognized in sedimentary clays. The associated clays consist chiefly of well-crystallized kaolinite. The dioctahedral chlorite, however, seems to be most abundant where diaspore and boehmite occur along with the kaolinite. Barium, chromium, copper, phosphorus and strontium are present in some samples in amounts of several hundred pans per million or more, and may contribute to the failure of some clays to perform satisfactorily in firing tests. Lithium-rich clays could serve as a significant lithium resource in the very distant future. Clays that contain as much as 1% lithium may be common enough in Missouri or in Pennsylvania to be produced as a by-product to help support benefication costs for refractory clays. Sufficient amounts of lithium-rich clay may be found in deposits that have been explored, found unsatisfactory for normal refractory uses, and not developed. The lithium-rich clay in some deposits presently being worked may be worth stockpiling for eventual use.

Energy