USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Metamorphic Geology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

104 records · Page 6Linked to original sources
USGS1978

Igneous and metamorphic petrology of the southwestern Dana Mountains, Lassiter Coast, Antarctic Peninsula

The southwestern Dana Mountains of the southern Antarctic Peninsula are underlain by the western part of a composite concentrically zoned Upper Cretaceous batholith consisting largely of granodiorite. The granodiorite (felsic phase) was intrusive into older heterogeneous gabbro-diorite (mafic phase) which makes up the margin of the batholith. Flat-lying pegmatite bodies and abundant inclusions, roof pendants, and septa of metasedimentary rocks and gabbrodiorite suggest that the granodiorite lies near the roof of the batholith. Petrography, chemistry, field relations, and radiometric age dates indicate that the batholith is part of the Andean intrusive suite, a suite of calc-alkaline plutonic rocks that crops out extensively throughout the Antarctic Peninsula and Chilean and Patagonian Andes. Textural features, mineralogy, and chemical data indicate that both phases of the batholith in the southwestern Dana Mountains have been contaminated by assimilation of the Latady Formation, an Upper Jurassic sequence of shale, siltstone, and sandstone that underlies large parts of the southern Antarctic Peninsula. Composition of the granodiorite also has been modified by assimilation of lesser amounts of the gabbro-diorite phase. Such contaminated plutonic rocks occur in several places in the northern Antarctic Peninsula; the batholith in the southwestern Dana Mountains represents the southernmost exposures of contaminated igneous rocks known from the Antarctic Peninsula. Hornblende andesite dikes cut both the mafic and felsic phases of the batholith. Chemical data imply that the dikes represent small amounts of mafic material remobilized by intrusion of the granodiorite. During the austral summers of 1969

Antarctic Peninsula, Dana Mountains, Lassiter Coas↗
USGS1976

High-level plateaus of the southeastern Beartooth Mountains, Montana and Wyoming: remnants of an exhumed sub-Cambrian marine plain

The Beartooth Mountains of south-central Montana and northwestern Wyoming are a northwesterly trending high rugged range made up mainly of Precambrian metamorphic rocks. The southeastern part of the range is characterized by extensive high-altitude flat or gently rolling plateaus separated by deep glaciated canyons. The plateaus along the crest of the range are at altitudes of more than 3,350 metres (11,000 ft), whereas those on the flanks of the range are much lower. They are almost entirely on Precambrian rocks, and only small patches of Cambrian sedimentary rocks still remain at a few places in the high mountains. Topographic profiles across the southeastern Beartooth Mountains show that: (1) plateaus bearing the sedimentary remnants lie very close to the position of the sub-Cambrian depositional surface as projected from known occurrences of that surface along the south side of the mountains; (2) other plateaus on the crest and southwest flank also lie near this projected position; and (3) high plateaus and other summits on the northeast slope in areas distant from known or projected positions of the sub-Cambrian surface are markedly accordant. We believe the plateaus along the crest and southwest flank of the range to be remnants of an exhumed marine plain of Early Cambrian or Precambrian age, and those on the northeast flank may possibly have a similar origin. The sub-Cambrian depositional surface was protected until early Tertiary time by a cover of Paleozoic sedimentary rocks, and parts of it probably were covered until Pliocene time by Eocene volcanic rocks. The surface subsequently has been profoundly modified by fluvial and glacial erosion and by mass wasting.

Montana, Wyoming↗
USGS2017

Petrology and geochronology of Mesoproterozoic basement of the Mount Rogers area of southwestern Virginia and northwestern North Carolina: Implications for the Precambrian tectonic evolution of the southern Blue Ridge province

Results from new geologic mapping, SHRIMP U-Pb geochronology, and petrologic studies indicate that Mesoproterozoic basement in the northern French Broad massif near Mount Rogers consists of multiple, mostly granitic plutons, map- and outcrop-scale xenoliths of pre-existing crustal rocks, and remnants of formerly overlying meta-sedimentary lithologies. Zircon and titanite ages demonstrate that these rocks collectively record nearly 350 m.y. of tectonic evolution including periods of igneous intrusion at ca . 1190 to 1130 Ma (Early Magmatic Suite) and ca . 1075 to 1030 Ma (Late Magmatic Suite) and three episodes of regional metamorphism at ca . 1170 to 1140, 1070 to 1020, and 1000 to 970 Ma. The existence of ca . 1.3 Ga age crust is indicated by (1) orthogranofels of ca . 1.32 Ga age in a map-scale xenolith, (2) inherited zircons of ca . 1.33 to 1.29 Ga age in Early Magmatic Suite plutons, and (3) ca . 1.36 to 1.30 Ga age detrital zircons in meta-sedimentary lithologies. Mineral assemblages developed in amphibolites and granofelses indicate that metamorphism during both Mesoproterozoic episodes occurred at upper amphibolite- to lower granulite-facies conditions. Syn-orogenic Early Magmatic Suite plutons emplaced at ca . 1190 to 1145 Ma are characterized by high-K, variably magnesian, dominantly calc-alkalic compositions, and have trace-element characteristics indicative of continental-arc magmatic origin involving melting of thick continental crust. In contrast, ca . 1140 Ma age quartz syenite displays A-type features indicating derivation from depleted crustal sources with increased mantle input during waning stages of regional contraction. Plutons of the compositionally bimodal Late Magmatic Suite include (1) ca . 1060 Ma meta-granite with geochemical characteristics transitional between silicic rocks of arc systems and post-collisional granites of A-type lineage, and (2) ca . 1055 Ma monzodioritic rocks with A-type compositional characteristics that likely reflect derivation from fertile, mafic sources in the lower crust. Collectively, these data suggest that Mesoproterozoic rocks of the study area preserve evidence of multiple orogenic episodes that likely involved continental-arc development and deformation at ca . 1150 Ma followed by crustal thickening at ca . 1060 Ma. Field relations and geochronologic data indicate that regional uplift and sedimentation occurred at ca . 1100 Ma between the two episodes of overlapping magmatism and orogenesis. The nature and timing of Mesoproterozoic events recorded in basement rocks of the study area illustrate significant differences in the lithologic assemblages and geologic history preserved by Mesoproterozoic basement of the adjacent Shenandoah and French Broad massifs, suggesting that the Blue Ridge massifs occupied different locations within the regional Grenville-age orogen until about 1070 Ma when the effects of Ottawan-age tectonics began to affect both areas. The near ubiquity of Ottawan-age orogenic activity recorded in Mesoproterozoic rocks of the Blue Ridge, other Appalachian inliers such as the New Jersey Highlands, and the Grenville province of Canada, including the Adirondacks, suggests that these formerly disparate terranes were amalgamated to form a common, regional orogen by this time.

North Carolina, Virginia↗
USGS2017

Confirmation of the southwest continuation of the Cat Square terrane, southern Appalachian Inner Piedmont, with implications for middle Paleozoic collisional orogenesis

Detailed geologic mapping, U-Pb zircon geochronology and whole-rock geochemical analyses were conducted to test the hypothesis that the southwestern extent of the Cat Square terrane continues from the northern Inner Piedmont (western Carolinas) into central Georgia. Geologic mapping revealed the Jackson Lake fault, a ∼15 m-thick, steeply dipping sillimanite-grade fault zone that truncates lithologically distinct granitoids and metasedimentary units, and roughly corresponds with a prominent aeromagnetic lineament hypothesized to represent the southern continuation of the terrane-bounding Brindle Creek fault. Results of U-Pb SHRIMP geochronology indicate Late Ordovician to Silurian granitoids (444–439 Ma) occur exclusively northwest of the fault, whereas Devonian (404–371 Ma) granitoids only occur southeast of the fault. The relatively undeformed Indian Springs granodiorite (three individual bodies dated 317–298 Ma) crosscuts the fault and occurs on both sides, which indicates the Jackson Lake fault is a pre-Alleghanian structure. However, detrital zircon signatures from samples southeast of the Jackson Lake fault reveal dominant Grenville provenance, in contrast to Cat Square terrane detrital zircon samples from the northern Inner Piedmont, which include peri-Gondwanan (600–500 Ma) and a prominent Ordovician-Silurian (∼430 Ma) signature. We interpret the rocks southeast of the Jackson Lake fault to represent the southwestern extension of the Cat Square terrane primarily based on the partitioning of granitoid ages and lithologic distinctions similar to the northern Inner Piedmont. Data suggest Cat Square terrane metasedimentary rocks were initially deposited in a remnant ocean basin setting and developed into an accretionary prism in front of the approaching Carolina superterrane, ultimately overridden by it in Late Devonian to Early Mississippian time. Burial to >20 km resulted in migmatization of lower plate rocks, forming an infrastructure beneath the Carolina superterrane suprastructure. Provenance patterns support ∼250 km of Devonian dextral translation of the composite Inner Piedmont, which places the northern portion of the Inner Piedmont adjacent to a suite of ∼430 Ma plutons in the Virginia Blue Ridge during deposition. The megascopic thrust-nappe structural style of the northern Inner Piedmont, combined with southwest-directed lateral extrusion at mid-crustal depths, may reconcile differences in timing of metamorphism between the Carolina and central Georgia Inner Piedmont and structural contrasts between the Brindle Creek and Jackson Lake faults.

American Journal of Science↗
USGS2004

Geophysical modeling of the northern Appalachian Brompton-Cameron, Central Maine, and Avalon terranes under the New Jersey Coastal Plain

A regional terrane map of the New Jersey Coastal Plain basement was constructed using seismic, drilling, gravity and magnetic data. The Brompton-Cameron and Central Maine terranes were coalesced as one volcanic island arc terrane before obducting onto Laurentian, Grenville age, continental crust in the Taconian orogeny [Rankin, D.W., 1994. Continental margin of the eastern United States: past and present. In: Speed, R.C., (Ed.), Phanerozoic Evolution of North American Continent-Ocean Transitions. DNAG Continent-Ocean Transect Volume. Geological Society of America, Boulder, Colorado, pp. 129-218]. Volcanic island-arc rocks of the Avalon terrane are in contact with Central Maine terrane rocks in southern Connecticut where the latter are overthrust onto the Brompton-Cameron terrane, which is thrust over Laurentian basement. Similarities of these allochthonous island arc terranes (Brompton-Cameron, Central Maine, Avalon) in lithology, fauna and age suggest that they are faulted segments of the margin of one major late Precambrian to early Paleozoic, high latitude peri-Gondwana island arc designated as "Avalonia", which collided with Laurentia in the early to middle Paleozoic. The Brompton Cameron, Central Maine, and Avalon terranes are projected as the basement under the eastern New Jersey Coastal Plain based on drill core samples of metamorphic rocks of active margin/magmatic arc origin. A seismic reflection profile across the New York Bight traces the gentle dipping (approximately 20 degrees) Cameron's Line Taconian suture southeast beneath allochthonous Avalon and other terranes to a 4 sec TWTT depth (approximately 9 km) where the Avalonian rocks are over Laurentian crust. Gentle up-plunge (approximately 5 degrees) projections to the southwest bring the Laurentian Grenville age basement and the drift-stage early Paleozoic cover rocks to windows in Burlington Co. at approximately 1 km depth and Cape May Co. at approximately 2 km depths. The antiformal Shellburne Falls and Chester domes and Chain Lakes-Pelham dome-Bronson Hill structural trends, and the synformal Connecticut Valley-Gaspe structural trend can be traced southwest into the New Jersey Coastal Plain basement. A Mesozoic rift basin, the "Sandy Hook basin", and associated eastern boundary fault is identified, based upon gravity modeling, in the vicinity of Sandy Hook, New Jersey. The thickness of the rift-basin sedimentary rocks contained within the "Sandy Hook basin" is approximately 4.7 km, with the basin extending offshore to the east of the New Jersey coast. Gravity modeling indicates a deep rift basin and the magnetic data indicates a shallow magnetic basement caused by magnetic diabase sills and/or basalt flows contained within the rift-basin sedimentary rocks. The igneous sills and/or flows may be the eastward continuation of the Watchung and Palisades bodies. ?? 2004 Elsevier Ltd. All rights reserved.

Journal of Geodynamics↗
USGS2007

Origin of the Lyme Dome and implications for the timing of multiple Alleghanian deformational and intrusive events in southern Connecticut

Geologic mapping, structural analysis, and geochronology in the area of the Lyme dome, southern Connecticut provides constraints on the origin of the rocks in the core of the dome, the absolute timing of the principal deformational and thermal events attributed to Alleghanian orogenesis, and the processes that generated the dome. Detrital zircon geochronology in combination with ages on intrusive rocks brackets the deposition of quartzite in the core of the dome sometime between ca. 925 and 620 Ma. Granite and granodiorite intruded the Neoproteorozic metasedimentary rocks in the core of the dome at ca. 620 to 610 Ma. Four major early Permian events associated with the Alleghanian orogeny affected the rocks in the Lyme dome area. Syn-tectonic migmatization and widespread penetrative deformation (D1, ca. 300 - 290 Ma) included emplacement of alaskite at 290 ?? 4 Ma during regional foliation development and aluminosilicate-orthoclase metamorphic conditions. Rocks of the Avalon terrane may have wedged between Gander cover rocks and Gander basement in the core of the Lyme during D1. Limited structural evidence for diapiric uplift of the Lyme dome indicates that diapirism started late in D1 and was completed by D2 (ca. 290 - 280 Ma) when horizontal WNW contractional stresses dominated over vertical stresses. Second sillimanite metamorphism continued and syn-tectonic D2 granite pegmatite (288 ?? 4 Ma) and the Joshua Rock Granite Gniess (284 ?? 3 Ma) intruded at this time. North-northwest extension during D3 (ca. 280 - 275 Ma) led to granitic pegmatite intrusion along S3 cleavage planes and in extensional zones in boudin necks during hydraulic failure and decompression melting. Intrusion of a Westerly Granite dike at 275 ?? 4 Ma suggests that D3 extension was active, and perhaps concluding, by ca. 275 Ma. Late randomly oriented but gently dipping pegmatite dikes record a final stage of intrusion during D4 (ca. 275 - 260 Ma), and a switch from NNW extension to vertical unloading and exhumation. Monazite and metamorphic zircon rim ages record this event at ca. 259 Ma. The evolution of the Lyme dome involved D1 mylonitization, intrusion, and migmatization during north-directed contraction, limited late D1 diapirism, D2 migmatization during WNW contraction with associated flexural flow and fold interference, D3 NNW horizontal extension and decompression melting, and final D4 vertical extension and rapid exhumation. Late regional uplift, extension, and normal faulting at higher crustal levels may have been caused by diapiric rise of the lower crust, below the structural level of the Lyme dome. The rocks record no evidence of Acadian metamorphism or deformation, suggesting that the Gander zone here was not tectonically juxtaposed with Avalon until the Alleghanian orogeny.

American Journal of Science↗
USGS2007

Organic metamorphism in the Lower Mississippian-Upper Devonian Bakken shales. Part 1: Rock-Eval pyrolysis and vitrinite reflectance

Detailed organic geochemistry has been performed on a large number of Lower Mississippian-Upper Devonian Bakken shales from the North Dakota portion of the Williston Basin, and 28 oils mainly from Mississippian Madison Group rocks from different basinal areas. Here we report results of Rock-Eval pyrolysis and vitrinite reflectance ( R o ) analyses. Variable paleoheat flows in the Williston Basin caused the threshold of intense hydrocarbon generation to occur at different depths in different basinal areas. In higher paleogeothermal gradient basinal areas, this event occurred at depths of 7,650-8,000 ft, and at 10,000 ft or deeper in lower paleogeothermal gradient areas of the Basin. Distinct organic metamorphic imprints in Williston Basin sediments were also caused by extreme, but variable, paleoheat flows in the basin, as well as secondary migration of crude oils from deep basinal source areas. The high paleoheat flows are postulated as being due to a Late Cretaceous - Paleocene aborted rift event. Only a small volume of Bakken shales in restricted areas of the Williston Basin was responsible for the oil found reservoired in Mississippian Madison Group rocks. However, this small shale volume has been responsible for a relatively large amount of crude oil. R o profiles in the Tertiary through Middle Jurassic rocks in the Williston Basin had steep, linear R o versus depth gradients, with strong reversals of R o values occurring in the Lower Jurassic rocks. The lower Mesozoic through Paleozoic rocks of the Basin had strongly suppressed R o values compared to the values in the Tertiary through Middle Jurassic rocks. This was especially true of the R o values in the Bakken shales. This R o suppression was due to a change in organic matter (OM) type from oxygen-rich terrestrially derived OM in the younger rocks, to a hydrogen-rich marine derived OM in the deeper, older rocks. The threshold of intense oil generation (TIHG) occurred in the Bakken shales of the Williston Basin at R o values somewhere between 0.9 and 1.7% (best estimate 0.9), as would be read in oxygen-rich OM. Much higher burial temperatures (and consequently R o values) than usually held to be necessary were required for both the TIHG as well as mainstage hydrocarbon generation in the Bakken shales. These results are most likely applicable in general to source rocks with hydrogen-rich OM. The data of this study have major implications to petroleum exploration as well as to petroleum resource assessment.

Journal of Petroleum Geology↗
USGS2010

Hydrogeology of the potsdam sandstone in northern New York

The Potsdam Sandstone of Cambrian age forms a transboundary aquifer that extends across northern New York and into southern Quebec. The Potsdam Sandstone is a gently dipping sequence of arkose, subarkose, and orthoquartzite that unconformably overlies Precambrian metamorphic bedrock. The Potsdam irregularly grades upward over a thickness of 450 m from a heterogeneous feldspathic and argillaceous rock to a homogeneous, quartz-rich and matrix-poor rock. The hydrogeological framework of the Potsdam Sandstone was investigated through an analysis of records from 1,500 wells and geophysical logs from 40 wells, and through compilation of GIS coverages of bedrock and surficial geology, examination of bedrock cores, and construction of hydrogeological sections. The upper several metres of the sandstone typically is weathered and fractured and, where saturated, readily transmits groundwater. Bedding-related fractures in the sandstone commonly form sub-horizontal flow zones of relatively high transmissivity. The vertical distribution of sub-horizontal flow zones is variable; spacings of less than 10 m are common. Transmissivity of individual flow zones may be more than 100 m 2 /d but typically is less than 10 m 2 /d. High angle fractures, including joints and faults, locally provide vertical hydraulic connection between flow zones. Hydraulic head gradients in the aquifer commonly are downward; a laterally extensive series of sub-horizontal flow zones serve as drains for the groundwater flow system. Vertical hydraulic head differences between shallow and deep flow zones range from 1 m to more than 20 m. The maximum head differences are in recharge areas upgradient from the area where the Chateauguay and Chazy Rivers, and their tributaries, have cut into till and bedrock. Till overlies the sandstone in much of the study area; its thickness is generally greatest in the western part, where it may exceed 50 m. A discontinuous belt of bedrock pavements stripped of glacial drift extends across the eastern part of the study area; the largest of these is Altona Flat Rock. Most recharge to the sandstone aquifer occurs in areas of thin, discontinuous till and exposed bedrock; little recharge occurs in areas where this unit is overlain by thick till and clay. Discharge from the sandstone aquifer provides stream and river baseflow and is the source of many springs. A series of springs that are used for municipal bottled water and fish-hatchery supply discharge from 1,000 to 5,000 L/min adjacent to several tributaries east of the Chateauguay River. The major recharge areas for the Chateauguay springs are probably upgradient to the southeast, where the till cover is thin or absent.

New York↗
USGS2007

Two lithospheric profiles across southern California derived from gravity and seismic data

We present two detailed 2-D density transects for the crust and uppermost mantle across southern California using a linear gravity inversion technique. This technique parameterizes the crust and upper mantle as a set of blocks that are based on published geologic and seismic models. Each block can have a range of densities that are constrained where possible by borehole measurements, seismic velocities, and petrologic data. To further constrain the models, it is assumed that the lithosphere is close to isostatic equilibrium at both ends of the profiles, in the deep ocean and east of the Mojave Desert. We calculate the lithostatic pressure variations field for the whole cross section to rule out the geophysically insignificant solutions. In the linear equation, ρ = a + bV ( V , seismic P-wave velocity; ρ , density), which approximates the mantle density–velocity ( ρ – V ) relationship, different coefficients for b were evaluated. Lower coefficients ( b < 0.2) correspond to an almost purely thermally perturbed mantle, while higher coefficients ( b > 0.3) imply that other effects, such as composition and/or metamorphic changes, play an important role in the mantle. Density models were constructed with the coefficient b ranging from 0 to 0.6. The results indicate that a high b value in the mantle ρ – V relationship is associated with less dense crust in the Mojave block and more dense crust in the Catalina schist block. In the less dense Mojave block, the average density of the whole crust is ∼2.75 g/cm 3 , while that of the lower crust is ∼2.72 g/cm 3 . These densities imply a high silica content in the crust, and a minor fraction of basic rock in the lower crust, or perhaps the absence of a basaltic layer altogether. By comparison, the average density of a typical continental stable platform is ∼2.85 g/cm 3 . Models with higher b coefficients (0.5–0.6) are characterized by a large isostatic imbalance. On the other hand, lower b values (0–0.2) require a consolidated whole crust density in the Mojave Desert of ∼2.78 g/cm 3 , and a lower crust density of ∼2.89 g/cm 3 with mostly basaltic composition. This contradicts the observed, lower V p / V s -ratio in the Mojave Desert associated with mostly felsic and low-density crust. Models with lower b coefficients (0.1–0.2) are characterized by an absence of local Airy compensation beneath the San Gabriel Mountains at the LARSE-1 profile. These, and other non-gravity arguments, suggest optimal solutions to the mantle ρ – V relation of b ∼ 0.2–0.4. This, in turn, means that both thermal and petrological effects occur inside the downwelling of the uppermost mantle high velocity body located beneath the Transverse Ranges. During the development of this mantle downwelling, the basaltic layer of the Mojave block was likely eroded and pulled down into the high velocity body. Those basaltic fragments may have been transformed into eclogites, and this metamorphic change implies a higher b -coefficient density–velocity relationship than would be expected for a purely thermal process.

California↗
USGS2012

Geology of the Mount St. Helens area: Record of discontinuous volcanic and plutonic activity in the Cascade Arc of southern Washington

The Quaternary edifice of Mount St. Helens volcano was built upon a deeply eroded terrane of gently folded and altered volcanic and plutonic rocks that represent the core of the Tertiary Cascade magmatic arc. These rocks constitute an east dipping homoclinal sequence, several kilometers thick, of subaerially erupted mafic to silicic flows and volcaniclastic strata; K‐Ar ages from this section range from about 28 to 23 Ma (late Oligocene and earliest Miocene), which corresponds to an apparent lull in Cascade volcanism to the north of Mount Rainier. Volcanism was essentially continuous during this period of time, and neither a well‐defined base nor top of the section is exposed within the mapped area. Basalt and basaltic andesite dominate the lower part of the mid‐Tertiary section, whereas andesitic and dacitic rocks comprise most of the upper part. This section was intruded by numerous mafic to silicic dikes, sills, and irregular plutonic bodies, most no more than a few million years younger than their host rocks, and subjected to pervasive burial metamorphism and widespread hydrothermal alteration. Large areas of hornfelsed rock surrounding even relatively small intrusions indicate that the proportion of plutonic rock becomes significantly greater at shallow depth beneath the existing erosion surface. A large granitic pluton intruded the mid‐Tertiary section north of Spirit Lake at about 21 Ma. The Earl porphyry copper deposit occurs within the pluton but appears too young (17 Ma) to be genetically related to it. In contrast to the rather continuous and voluminous Oligocene to early Miocene activity, volcanism since then in the Mount St. Helens area has been localized and Volumetrically minor. Products of three younger eruptive periods have been recognized: a sequence of 15 m.y. old pyroxene andesite flows resting unconformably on mid‐Tertiary strata south of Mount St. Helens, widespread shallow dikes and sills of pyroxene andesite between 10 and 8 m.y. old, and compositionally diverse rocks erupted during the past 3 m.y. The Quaternary lavas are more potassic than the Tertiary lavas and typically contain phenocrysts of hornblende and biotite, which are absent from the older rocks. A number of Tertiary structures define a broad NNE trending zone that may reflect a deep‐seated lithospheric flaw that has controlled the locus of Cascade magmatism in southern Washington for the past 25 m.y. Mount St. Helens lies within this zone at the intersection of the NNW striking St. Helens seismic zone (SHZ) and an ENE trending alignment of Pleistocene silicic plug‐domes. No surface breakage has been detected along the SHZ, which is apparently very young. The linear zone of silicic vents is probably controlled by a fault that has been interpreted from seismic records to occur directly beneath the volcano. This zone parallels the directions of regional maximum horizontal compressive stress and North America/Juan de Fuca plate convergence. Mount St. Helens is an example of a low‐volume tectonically controlled magmatic system in an early stage of development.

Washington↗
USGS1997

A geologic history of the north-central Appalachians, part 2: The Appalachian basin from the Silurian through the Carboniferous

The north-central Appalachians occupy a critical position within the 3000+ km-long Appalachian orogen, lying southwest of the boundary between the central and northern Appalachians (CNAB). The one-billion-year-long history of tectonic activity in the north-central Appalachians includes the assembly and breakup of a late Proterozoic supercontinent, the creation and evolution of the Appalachian orogen during the Paleozoic, and the Mesozoic transformation of the active orogen into a passive margin during Pangea's disassembly. An important part of the Middle and Late Paleozoic history is the formation and growth of the Appalachian basin, an enormous, elongate continental basin lying cratonward of the active Appalachian internides along Laurentia's eastern margin. The Appalachian basin developed out of the Taconic orogeny, the second of the four orogenies that formed and modified the character of the Appalachian orogen. Prior to the Taconic orogeny, the eastern margin of Laurentia consisted of a broad carbonate shelf facing the Theic Ocean. The Taconic orogeny obduced various Theic components, including microcontinents, magmatic arcs, and accretionary prisms, onto the carbonate shelf. The resulting Taconic highlands formed a topographic barrier between Theia and the craton's interior. Because tectonic activity in the internides continued more or less throughout the remainder of the Paleozoic, the Appalachian basin never had a direct connection with Theia. The coarse-grained molasse from the newly uplifted Taconic highland spread westward over most of the basin during the Early Silurian. Carbonate deposition gradually encroached eastward over the basin as the siliciclastic input from the southeast waned. A resurgence in the earliest Late Silurian, perhaps related to orogenesis in Newfoundland and the Maritimes, expanded the clastic wedge somewhat. Before long, however, carbonate deposition once again dominated most of the north-central basin for the remainder of the Silurian and into the Early Devonian. The Early-to-Middle Devonian Acadian orogeny began introducing siliciclastic material into the eastern part of the Appalachian basin, thereby ending the largely paralic environment that persisted from the Late Silurian. A number of deltas formed around local sediment-input centers during the Middle Devonian. Continued uplift and/or orogenesis must have continued into the Late Devonian because a vast amount of terrigenous sediment was introduced into the Appalachian basin to form the vast Upper Devonian Catskill delta. Although the principal tectonic activity appears to have centered in New England, the large volume of sediment input suggests that orogenesis may have extended southward to the north-central Appalachians. However, direct evidence of actual Acadian deformation and metamorphism is lacking at this latitude. The north-central Appalachian basin underwent a significant change during the Carboniferous. Prior to this time, the shoreline shifted laterally through transgressions and regressions largely as a function of sediment input and regional subsidence. In the Carboniferous, vertical movements in the basin became more important. During the Early Carboniferous, much of the Mauch Chunk delta was eroded in the central and western parts of the basin. At the end of the Early Carboniferous, an unconformity truncated progressively older rocks to the north toward New York. New sediment transport patterns and depositional environments within the basin during the Late Carboniferous probably reflect significant topographic and tectonic changes, not only in the hinterland, but in the basin itself, perhaps in conjunction with climatic changes. Extensive interfluvial swamps on a lower delta plain accumulated thick organic deposits which would become coal. This delta plain graded southwestward into tidal and marine environments. The Alleghany orogeny in the Early Permian interrupted deposition in much of the north-central Appalachian basin and profoundly altered its structure.

American Journal of Science↗
USGS2012

A seismic refraction survey of the Imperial Valley Region, California

The U.S. Geological Survey conducted an extensive seismic refraction survey in the Imperial Valley region of California in 1979. The Imperial Valley is located in the Salton Trough, an active rift between the Pacific and North American plates. Forty shots fired at seven shot points were recorded by 100 portable seismic instruments at typical spacing of 0.5–1 km. More than 1300 recording locations were occupied, and more than 3000 usable seismograms were obtained. We analyzed five profiles using a standard ray‐tracing program, constructed a contour map of reduced travel times from our most widely recorded shot point, and modeled an existing gravity profile across the Salton Trough. Results are itemized: (1) All models have in common a sedimentary layer ( V p = 1.8–5.0 km/s), a “transition zone” ( V p = 5.0–5.65 km/s), a basement ( V p = 5.65 km/s in the Imperial Valley, 5.9 km/s on the bordering mesas), and subbasement ( V p = 7.2 km/s). (2) The sedimentary layer ranges in thickness along the axis of the Salton Trough from 3.7 km (Salton Sea) to 4.8 km (U.S.‐Mexican border). On the bordering mesas it is quite variable in thickness. (3) The “transition” zone is about 1 km thick in most places. In the Imperial Valley there are no marked velocity discontinuities in this zone between the sedimentary layer and basement. On the bordering mesas, however, there is a discontinuity at the top of this zone. (4) There are apparently two types of basement. On the bordering mesas, basement is crystalline igneous and metamorphic rocks. In the Imperial Valley, basement is mostly lower‐greenshist‐facies sedimentary rocks, based primarily on the smooth transition in character from sediment to basement arrivals, the low value of basement velocity, and the fact that deep (4 km) wells in the valley penetrate only the upper part of the known Cenozoic stratigraphic column for the Salton Trough. (5) The subbasement, or intermediate crustal layer, ranges in depth along the axis of the Salton Trough from 16 km (Salton Sea) to 10 km (U.S.‐Mexican border). Gravity modeling requires that this layer deepen and/or pinch out beneath the bordering mesas and mountain ranges. Based on its high velocity and the presence of intrusive basaltic rocks in the sedimentary section in the Imperial Valley, the subbasement is thought to be a mafic intrusive complex similar to oceanic middle crust. (6) Several structures are seen that affect basement, transition zone, and deeper parts of the sedimentary layer. They include a scarp along the Imperial fault, as much as 1 km down to the northeast, and a scarp passing roughly along the topographic boundary between the Imperial Valley and the bordering mesa to the west, as much as 3½ km down to the east. We interpret the latter scarp to be the suture, or rift boundary, between the older crystalline basement on the mesa and the younger metasedimentary basement in the Imperial Valley. (7) On a contour map of reduced travel time from our most widely recorded shot point, subtle patches of early arrivals among otherwise late arrivals in the central Imperial Valley correlate well with known geothermal resource areas having reservoir temperatures of more than 150°C. Apparently the Salton Trough is a location where new crust is being generated. As the rift opens, mafic intrusive rocks fill it from below as sedimentary rocks fill it from above. Rifting and intrusion produce high heat flow that metamorphoses the sedimentary rocks to shallow depth (metasedimentary basement in the Imperial Valley) and thus consolidates the new crust.

California↗
USGS1982

Application of automated image analysis to coal petrography

The coal petrologist seeks to determine the petrographic characteristics of organic and inorganic coal constituents and their lateral and vertical variations within a single coal bed or different coal beds of a particular coal field. Definitive descriptions of coal characteristics and coal facies provide the basis for interpretation of depositional environments, diagenetic changes, and burial history and determination of the degree of coalification or metamorphism. Numerous coal core or columnar samples must be studied in detail in order to adequately describe and define coal microlithotypes, lithotypes, and lithologic facies and their variations. The large amount of petrographic information required can be obtained rapidly and quantitatively by use of an automated image-analysis system (AIAS). An AIAS can be used to generate quantitative megascopic and microscopic modal analyses for the lithologic units of an entire columnar section of a coal bed. In our scheme for megascopic analysis, distinctive bands 2 mm or more thick are first demarcated by visual inspection. These bands consist of either nearly pure microlithotypes or lithotypes such as vitrite/vitrain or fusite/fusain, or assemblages of microlithotypes. Megascopic analysis with the aid of the AIAS is next performed to determine volume percentages of vitrite, inertite, minerals, and microlithotype mixtures in bands 0.5 to 2 mm thick. The microlithotype mixtures are analyzed microscopically by use of the AIAS to determine their modal composition in terms of maceral and optically observable mineral components. Megascopic and microscopic data are combined to describe the coal unit quantitatively in terms of (V) for vitrite, (E) for liptite, (I) for inertite or fusite, (M) for mineral components other than iron sulfide, (S) for iron sulfide, and (VEIM) for the composition of the mixed phases (X i ) i = 1,2, etc. in terms of the maceral groups vitrinite V, exinite E, inertinite I, and optically observable mineral content M. The volume percentage of each component present is indicated by a subscript. For example, a lithologic unit was determined megascopically to have the composition (V) 13 (I) 1 (S) 1 (X 1 ) 83 (X 2 ) 2 . After microscopic analysis of the mixed phases, this composition was expressed as (V) 13 (I) 1 (S) 1 (V 63 E 19 I 14 M 4 ) 83 (V 67 E 11 I 13 M 9 ) 2 . Finally, these data were combined in a description of the bulk composition as V 67 E 16 I 13 M 3 S 1 . An AIAS can also analyze textural characteristics and can be used for quick and reliable determination of rank (reflectance). Our AIAS is completely software based and incorporates a television (TV) camera that has optimum response characteristics in the range of reflectance less than 5%, making it particularly suitable for coal studies. Analysis of the digitized signal from the TV camera is controlled by a microprocessor having a resolution of 64 gray levels between full illumination and dark current. The processed image is reconverted for display on a TV monitor screen, on which selection of phases or features to be analyzed is readily controlled and edited by the operator through use of a lightpen. We expect that automated image analysis, because it can rapidly provide a large amount of pertinent information, will play a major role in the advancement of coal petrography.

International Journal of Coal Geology↗
USGS2001

The geology of a part of Acadia and the nature of the Acadian orogeny across Central and Eastern Maine

The zone of Acadian collision between the Medial New England and Composite Avalon terranes is well preserved in Maine. A transect from northwest (Rome) to southeast (Camden) crosses the eastern part of Medial New England comprising the Central Maine basin, Liberty-Orrington thrust sheet, and Fredericton trough, and the western part of Composite Avalon, including the Graham Lake, Clarry Hill, and Clam Cove thrust sheets. U-Pb geochronology of events before, during, and after the Acadian orogeny helps elucidate the nature and distribution of tectonostratigraphic belts in this zone and the timing of some Acadian events in the Northern Appalachians. The Central Maine basin consists of sedimentary and volcanic rocks of Middle Ordovician (∼470 to ∼460 Ma) age overlain with probable conformity by latest Ordovician(?) through earliest Devonian marine rift and flysch sedimentary rocks; these are intruded by weakly to undeformed plutonic rocks of Early and Middle Devonian age (∼399–378 Ma). The Fredericton trough consists of Early Silurian gray pelite and sandstone to earliest Late Silurian calcareous turbidite, deformed and variably metamorphosed prior to the emplacement of Late Silurian (∼422 Ma) and Early to Late Devonian (∼418 to ∼368 Ma) plutons. The Liberty-Orrington thrust sheet consists of Cambrian(?)-Ordovician (>∼474 to ∼469 Ma and younger) clastic sedimentary and volcanic rocks intruded by highly deformed Late Silurian (∼424 to ∼422 Ma) and Devonian (∼418 to ∼389 Ma) plutons, possibly metamorphosed in Late Silurian time (prior to ∼417 Ma), and metamorphosed to amphibolite facies in Early to Middle Devonian time (∼400 to ∼381 Ma). The Graham Lake thrust sheet contains possible Precambrian rocks, Cambrian sedimentary rocks with a volcanic unit dated at ∼503 Ma, and Ordovician rocks with possible Caradocian Old World fossils, metamorphosed and deformed in Silurian time and intruded by mildly to undeformed Late Silurian (∼421 Ma) and Late Devonian (∼371 to ∼368 Ma) plutons. The Clarry Hill thrust sheet consists of poorly studied, highly metamorphosed Cambrian (?) rocks. The Clam Cove thrust sheet contains highly deformed Precambrian limestone, shale, sandstone, and conglomerate, metamorphosed to epidote amphibolite facies and intruded by a mildly deformed pluton dated at ∼421 Ma. Metamorphism, deformation, and voluminous intrusive igneous activity of Silurian age are common to both the most southeastern parts of Medial New England and the thrust sheets of Composite Avalon. In contrast to Medial New England, the thrust sheets of Composite Avalon show only modest effects of Devonian deformation and metamorphism. Regional stratigraphic relations, paleontologic findings, and U-Pb geochronology suggest that the Graham Lake, Clarry Hill, and Clam Cove thrust sheets are far-traveled allochthons that were widely separated from Medial New England in the Silurian. One hundred nine (109) new U-Pb analyses of zircon, monazite, and sphene from 25 samples of metamorphosed, stratified, and intrusive igneous rocks are used to decipher the history of events along the transect. In our view, many of the structures within Medial New England were formed during the closing of the back-arc ocean during the waning stages of the Taconian orogeny. These features include the precursors to the upright folds found in Silurian sedimentary rocks, the west-facing Liberty-Orrington thrust sheet, and the Silurian plutons of Medial New England. Acadian tectonic features, including flysch sedimentation, igneous activity, deformation with nappe emplacement, and metamorphism record the progressive loading of Medial New England by a stack of thrust nappes emplaced in latest Silurian to Middle Devonian time. The Acadian orogeny is a prolonged event, lasting from earliest Late Silurian to the Late Devonian, whose evolution involved: (1) convergence between Medial New England and Composite Avalon along an east-dipping subduction zone from earliest Late Silurian to Early Devonian time; (2) collision and concurrent delamination of lithospheric mantle beneath Medial New England in Early Devonian time resulting in deformation, high-grade metamorphism, and intrusive igneous activity in the most eastern part of Medial New England and the western parts of Composite Avalon; (3) Early to Middle Devonian northwest-migrating penetrative deformations of the Acadian Main stage, including northwest-directed thrusting and recumbent folding followed by tightening of folds possibly produced in the waning stages of the Taconian orogeny and forming folded wave trains of isoclinal folds (∼419 to ∼404 Ma), (4) asymmetrical folds produced by east-west shortening (∼399 to ∼380 Ma); and (5) final westward emplacement of Composite Avalon thrust sheets onto Medial New England in Late Devonian time (∼380 to ∼371 Ma). The present boundary between rocks of Medial New England and Composite Avalon at the surface is the Sennebec Pond fault, a high-angle fault that cuts the Graham Lake and Clarry Hill thrusts, and is intruded by the Mt. Waldo pluton (∼371), one of several Late Devonian plutons (∼371 to ∼367 Ma) that mark the end of the Acadian orogeny in coastal Maine. The thrust sheets of Composite Avalon carried rocks of peri-Gondwanan affinity and with possible Old World fauna many kilometers to the west over Medial New England, thus potentially hiding the original suture at depth under the Gulf of Maine.

Maine↗