SEARCH · USGS Science

Results for “Acoustics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 109 records · Page 6Linked to original sources

USGS2010

Comparison of turbidity to multi-frequency sideways-looking acoustic-Doppler data and suspended-sediment data in the Colorado River in Grand Canyon

Water clarity is important to biologists when studying fish and other fluvial fauna and flora. Turbidity is an indicator of the cloudiness of water, or reduced water clarity, and is commonly measured using nephelometric sensors that record the scattering and absorption of light by particles in the water. Unfortunately, nephelometric sensors only operate over a narrow range of the conditions typically encountered in rivers dominated by suspended-sediment transport. For example, sediment inputs into the Colorado River in Grand Canyon caused by tributary floods often result in turbidity levels that exceed the maximum recording level of nephelometric turbidity sensors. The limited range of these sensors is one reason why acoustic Doppler profiler instrument data, not turbidity, has been used as a surrogate for suspended sediment concentration and load of the Colorado River in Grand Canyon. However, in addition to being an important water-quality parameter to biologists, turbidity of the Colorado River in Grand Canyon has been used to strengthen the suspended-sediment record through the process of turbidity-threshold sampling; high turbidity values trigger a pump sampler to collect samples of the river at critical times for gathering suspended-sediment data. Turbidity depends on several characteristics of suspended sediment including concentration, particle size, particle shape, color, and the refractive index of particles. In this paper, turbidity is compared with other parameters coupled to suspended sediment, namely suspended-silt and clay concentration and multifrequency acoustic attenuation. These data have been collected since 2005 at four stations with different sediment-supply characteristics on the Colorado River in Grand Canyon. These comparisons reveal that acoustic attenuation is a particularly useful parameter, because it is strongly related to turbidity and it can be measured by instruments that experience minimal fouling and record over the entire range of turbidity encountered in the Colorado River in Grand Canyon. Relating turbidity to acoustic attenuation and suspended-silt and clay concentration provides an additional benefit in that data outliers are revealed that likely identify inflow events from anomalous sources with unusual sediment characteristics.

Arizona↗

USGS2017

A simulation method for combining hydrodynamic data and acoustic tag tracks to predict the entrainment of juvenile salmonids onto the Yolo Bypass under future engineering scenarios

During water year 2016 the U.S. Geological Survey California Water Science Center (USGS) collaborated with the California Department of Water Resources (DWR) to conduct a joint hydrodynamic and fisheries study to acquire data that could be used to evaluate the effects of proposed modifications to the Fremont Weir on outmigrating juvenile Chinook salmon. During this study the USGS surgically implanted acoustic tags in juvenile late fall run Chinook salmon from the Coleman National Fish Hatchery, released the acoustically tagged juvenile salmon into the Sacramento River upstream of the Fremont Weir, and tracked their movements as they emigrated past the western end of the Fremont Weir. The USGS analyzed tracking data from the acoustically tagged juvenile salmon along with detailed hydrodynamic data collected in the Sacramento River during the winter/spring of water year 2016 in the vicinity of the western end of the Fremont Weir to assess the potential for enhancing the entrainment of Sacramento River Chinook salmon onto the Yolo Bypass under six different Fremont Weir modification scenarios. Each modification scenario consists of a notch or multiple notches in the Fremont Weir which are designed to divert a portion of the Sacramento River onto the Yolo Bypass when the Sacramento River is below the crest of the Fremont Weir. The primary goal of this entrainment analysis was to investigate how the location of the notch or notches in each scenario affected the entrainment of juvenile Chinook salmon onto the Yolo Bypass, and to predict the notch location or locations that would result in maximum entrainment under each modification scenario. Stumpner et al.’s (in review) analysis of hydraulic data collected during the 2016 study period showed that backwater effects in the Sacramento River created significant variability in the relationship between Sacramento River stage and the proportion of the Sacramento River flow that we expect to be diverted onto the Yolo Bypass under the modification scenarios. Because of this variability, accurately evaluating the entrainment potential of possible notch locations for each scenario required combining historic abundance data for juvenile Sacramento River Chinook salmon with historic hydraulic data for the Sacramento River in the vicinity of the Fremont Weir, so that the entrainment estimates would reflect the covariance between Sacramento River stage, Sacramento River discharge, and juvenile salmon abundance within the historic record. We used a Monte Carlo simulation framework to combine the high resolution hydrodynamic data and acoustic tag track data collected in 2016 with historic juvenile salmon abundance, Sacramento River stage, and Sacramento River discharge data from a period spanning water years 1996-2010 to assess the entrainment potential of different weir modification scenarios under historic conditions. The scenarios we simulated consisted of four single notch configurations, and two multiple notch configurations in the vicinity of the western end of the Fremont Weir. For each notch configuration the 15-water-year entrainment simulation was repeated for 63 possible notch locations in the vicinity of the western end of the Fremont Weir. This approach allowed us to assess the effect of notch location on the entrainment of juvenile salmonids onto the Yolo Bypass for each of the six notch configurations that we evaluated. The entrainment simulations showed that the location of each notch configuration had a major impact on the entrainment for each scenario; the predicted entrainment of some scenarios varied by as much as 400% based on where the notch (or notches) was (were) located in the study area. All of the single notch scenarios performed best when they were located within a 330 ft (100 meter) long section of the Sacramento River bank adjacent to the western terminus of the Fremont Weir (Table 1). Both of the multiple notch scenarios performed best when their upstream notches were located about 660 ft (200 meters) upstream of the western terminus of the Fremont Weir (Table 1). The results of the entrainment simulations indicated that for each notch configuration the same notch location produced near-maximum entrainment regardless of run abundance timing; this result suggests that there are areas within the study are where a notch (or notches) can be sited to achieve maximum entrainment for all runs (barring significant behavioral or physiological differences between runs). In addition, the simulation results indicate that for each notch configuration the same location is expected to produce nearmaximum entrainment for both wet water years and dry water years. Based on the results of the entrainment simulation we make three general recommendations for strategies to improve the entrainment potential of a notch in the Fremont Weir: 1) Comparisons between the maximum entrainment potential for each scenario suggested that total entrainment of winter run, spring run, and fall run salmon onto the Yolo Bypass can be increased by increasing the amount of water entering a notch when the Sacramento River stage is between 19 ft and 22 ft NAVD88; this could be accomplished by lowering notch invert elevations or by adding a control section to the Sacramento River to raise stage for a given discharge. 2) The relationship between Sacramento River stage and entrainment for each scenario indicated that entrainment efficiency for each scenario declined significantly once Sacramento River stage exceeded bankfull (approximately 28.5 ft NAVD88). This effect was likely due to inundation of the floodplain between the Sacramento River and the Fremont Weir; Stumpner et. al (In Review) have documented a reduction in the strength of the secondary circulation and centralization of the downwelling zone in the Sacramento River when this floodplain is inundated. Therefore, increasing the height of the river right bank of the Sacramento River to coincide with the height of the Fremont Weir is recommended to increase entrainment at higher stages. 3) Bathymetric features upstream of notch openings appeared to have a major impact on the entrainment potential of the simulated notches. For this reason we recommend taking care to avoid siting notches immediately downstream of bank features that alter the sidewall boundary layer, and we expect that smoothing the bank bathymetry upstream of a notch will enhance entrainment. Finally, we caution that the entrainment simulation was based on the behavior of large hatchery smolts, so it is likely that our results will be sensitive to any differences in behavior and physiology between these hatchery surrogates and naturally migrating juvenile salmon.

California↗

USGS2019

Hawaiian hoary bat acoustic monitoring on U.S. Army O`ahu facilities

Acoustic sampling for occurrence of the endangered Hawaiian hoary bat ( Lasiurus cinereus semotus ) was conducted at 12 locations on U. S. Army installations on O‘ahu Island, Hawai‘i. Bats were confirmed as present at 10 of these locations: Dillingham Military Reservation, Helemano Military Reservation, Kahuku Training Area, Kawailoa Training Area, Mākua Military Reservation, Schofield Barracks East Range, Schofield Barracks West Range, Schofield Barracks (Mendonca Park Housing), Tripler Army Medical Center, and Wheeler Army Airfield. Our acoustic sampling did not record bat vocalizations at Fort DeRussy or Fort Shafter. Despite the presence of bats at the above 10 locations, foraging activity as identified from characteristic feeding buzzes was observed only at East Range and West Range of Schofield Barracks. Nevertheless, Hawaiian hoary bats were recorded actively searching for prey in airspace at 10 of the 12 areas during important periods of Hawaiian hoary bat life history, including periods of pregnancy, lactation, and pup fledging. Within-night bat activity pooled for all nights and detectors at each location showed bat activity was mostly confined to the first several hours of the night. This acoustic study detected bats at lower rates of occurrence (frequency of detection [“f”] = 0.07) compared to detection probabilities (“dp”) observed on the islands of Hawai‘i (dp = 0.56) and Maui (dp = 0.27), implying either behavioral differences or that they occur at lower densities on O‘ahu. The rate is also consistent with results from two previous acoustic studies conducted on O‘ahu; a year long monitoring study in the northern Ko‘olau Mountains in 2014 (dp = 0.08), and short-term seasonal Army monitoring efforts in 2012 (dp = 0.05 to 0.06).

Hawaii↗

USGS2017

Acoustic telemetry and fisheries management

This paper reviews the use of acoustic telemetry as a tool for addressing issues in fisheries management, and serves as the lead to the special Feature Issue of Ecological Applications titled “Acoustic Telemetry and Fisheries Management” . Specifically, we provide an overview of the ways in which acoustic telemetry can be used to inform issues central to the ecology, conservation, and management of exploited and/or imperiled fish species. Despite great strides in this area in recent years, there are comparatively few examples where data have been applied directly to influence fisheries management and policy. We review the literature on this issue, identify the strengths and weaknesses of work done to date, and highlight knowledge gaps and difficulties in applying empirical fish telemetry studies to fisheries policy and practice. We then highlight the key areas of management and policy addressed, as well as the challenges that needed to be overcome to do this. We conclude with a set of recommendations about how researchers can, in consultation with stock assessment scientists and managers, formulate testable scientific questions to address and design future studies to generate data that can be used in a meaningful way by fisheries management and conservation practitioners. We also urge the involvement of relevant stakeholders (managers, fishers, conservation societies, etc.) early on in the process (i.e. in the co-creation of research projects), so that all priority questions and issues can be addressed effectively.

Ecological Applications↗

USGS2018

Improving geographically extensive acoustic survey designs for modeling species occurrence with imperfect detection and misidentification

Acoustic recording units (ARUs) enable geographically extensive surveys of sensitive and elusive species. However, a hidden cost of using ARU data for modeling species occupancy is that prohibitive amounts of human verification may be required to correct species identifications made from automated software. Bat acoustic studies exemplify this challenge because large volumes of echolocation calls could be recorded and automatically classified to species. The standard occupancy model requires aggregating verified recordings to construct confirmed detection/non‐detection datasets. The multistep data processing workflow is not necessarily transparent nor consistent among studies. We share a workflow diagramming strategy that could provide coherency among practitioners. A false‐positive occupancy model is explored that accounts for misclassification errors and enables potential reduction in the number of confirmed detections. Simulations informed by real data were used to evaluate how much confirmation effort could be reduced without sacrificing site occupancy and detection error estimator bias and precision. We found even under a 50% reduction in total confirmation effort, estimator properties were reasonable for our assumed survey design, species‐specific parameter values, and desired precision. For transferability, a fully documented r package, OCacoustic, for implementing a false‐positive occupancy model is provided. Practitioners can apply OCacoustic to optimize their own study design (required sample sizes, number of visits, and confirmation scenarios) for properly implementing a false‐positive occupancy model with bat or other wildlife acoustic data. Additionally, our work highlights the importance of clearly defining research objectives and data processing strategies at the outset to align the study design with desired statistical inferences.

Ecology and Evolution↗

USGS2024

Comparing conventional tagging methods and acoustic telemetry to inform management of Lake Whitefish in Lake Michigan

Objective Studies of fish movement using conventional tags or acoustic telemetry have different benefits and biases that can influence how conclusions are used in a management context. Our objective was to determine whether these two methods provided similar inferences regarding movements and spawning site fidelity of Lake Whitefish Coregonus clupeaformis in Lake Michigan. Additionally, we assessed movement patterns and used telemetry to assess residency time of Lake Whitefish to provide managers with information on which stocks might be exposed to harvest in different regions. Methods Lake Whitefish were tagged during spawning in (1) North and Moonlight bays, (2) Big Bay de Noc, (3) the Menominee River, and (4) the Fox River. Proportions of fish moving between southern Green Bay, northern Green Bay, and Lake Michigan were compared between tag types. Spawning site fidelity was estimated for each tagging site. Seasonal residency indices were calculated using acoustic telemetry detections. Result Estimates differed between the two methods, but overall trends were similar. Fox River fish rarely left southern Green Bay, and fish tagged in North and Moonlight bays rarely entered Green Bay (<10% of individuals). Big Bay de Noc and Menominee River fish moved into other regions more often (>50% of individuals). The residency indices indicated that Big Bay de Noc fish spent most of their time in Lake Michigan while Menominee River fish spent little time in northern Green Bay despite transitioning to the region. Compared to telemetry, conventional tag recoveries underestimated the proportion of individuals moving among regions. Spawning site fidelity estimates (28–100%) varied among tagging groups and between methods. Conclusion Our results suggest that data from conventional tags can inform management at broad geographic scales. However, acoustic telemetry can provide fine-scale information. Information gained from telemetry can be useful in understanding exposure to fishing mortality, which may be valuable for informing management decisions.

Lake Michigan↗

USGS2018

Evaluating autonomous acoustic surveying techniques for rails in tidal marshes

There is a growing interest toward the use of autonomous recording units (ARUs) for acoustic surveying of secretive marsh bird populations. However, there is little information on how ARUs compare to human surveyors or how best to use ARU data that can be collected continuously throughout the day. We used ARUs to conduct 2 acoustic surveys for king ( Rallus elegans ) and clapper rails ( R. crepitans ) within a tidal marsh complex along the Pamunkey River, Virginia, USA, during May–July 2015. To determine the effectiveness of an ARU in replacing human personnel, we compared results of callback point‐count surveys with concurrent acoustic recordings and calculated estimates of detection probability for both rail species combined. The success of ARUs at detecting rails that human observers recorded decreased with distance ( P ≤ 0.001), such that at <25 m, 90.3% of human‐recorded rails also were detected by the ARU, but at >75 m, only 34.0% of human‐detected rails were detected by the ARU. To determine a subsampling scheme for continuous ARU data that allows for effective surveying of presence and call rates of rails, we used ARUs to conduct 15 continuous 48‐hr passive surveys, generating 720 hr of recordings. We established 5 subsampling periods of 5, 10, 15, 30, and 45 min to evaluate ARU‐based presence and vocalization detections of rails compared with each of the full 60‐min sampling of ARU‐based detection of rails. All subsampling periods resulted in different ( P ≤ 0.001) detection rates and unstandardized vocalization rates compared with the hourly sampling period. However, standardized vocalization counts from the 30‐min subsampling period were not different from vocalization counts of the full hourly sampling period. When surveying rail species in estuarine environments, species‐, habitat‐, and ARU‐specific limitations to ARU sampling should be considered when making inferences about abundances and distributions from ARU data.

Wildlife Society Bulletin↗

USGS2010

Oscillating load-induced acoustic emission in laboratory experiment

Spatial and temporal patterns of acoustic emission (AE) were studied. A pre-fractured cylinder of granite was loaded in a triaxial machine at 160 MPa confining pressure until stick-slip events occurred. The experiments were conducted at a constant strain rate of 10 −7 s −1 that was modulated by small-amplitude sinusoidal oscillations with periods of 175 and 570 seconds. Amplitude of the oscillations was a few percent of the total load and was intended to simulate periodic loading observed in nature (e.g., earth tides or other sources). An ultrasonic acquisition system with 13 piezosensors recorded acoustic emissions that were generated during deformation of the sample. We observed a correlation between AE response and sinusoidal loading. The effect was more pronounced for higher frequency of the modulating force. A time-space spectral analysis for a “point” process was used to investigate details of the periodic AE components. The main result of the study was the correlation of oscillations of acoustic activity synchronized with the applied oscillating load. The intensity of the correlated AE activity was most pronounced in the “aftershock” sequences that followed large-amplitude AE events. We suggest that this is due to the higher strain-sensitivity of the failure area when the sample is in a transient, unstable mode. We also found that the synchronization of AE activity with the oscillating external load nearly disappeared in the period immediately after the stick-slip events and gradually recovered with further loading.

Book chapter↗

USGS2006

Basaltic thermals and Subplinian plumes: Constraints from acoustic measurements at Shishaldin volcano, Alaska

The 1999 basaltic eruption of Shishaldin volcano (Alaska, USA) included both Strombolian and Subplinian activity, as well as a “pre-Subplinian” phase interpreted as the local coalescence within a long foam in the conduit. Although few visual observations were made of the eruption, a great deal of information regarding gas velocity, gas flux at the vent and plume height may be inferred by using acoustic recordings of the eruption. By relating acoustic power to gas velocity, a time series of gas velocity is calculated for the Subplinian and pre-Subplinian phases. These time series show trends in gas velocity that are interpreted as plumes or, for those signals lasting only a short time, thermals. The Subplinian phase is shown to be composed of a thermal followed by five plumes with a total expelled gas volume of ≈ 1.5 × 10 7 m 3 "> ≈ 1.5 × 10 7 m 3 . The initiation of the Subplinian activity is probably related to the arrival of a large overpressurised bubble close to the top of the magma column. A gradual increase in low-frequency (0.01–0.5 Hz) signal prior to this “trigger bubble” may be due to the rise of the bubble in the conduit. This delay corresponds to a reservoir located at ≈3.9 km below the surface, in good agreement with studies on other volcanoes. The presence of two thermal phases is also identified in the middle of the pre-Subplinian phase with a total gas release of ≈ 4.3 × 10 6 m 3 "> ≈ 4.3 × 10 6 m 3 and ≈ 3.6 × 10 6 m 3 "> ≈ 3.6 × 10 6 m 3 . Gas velocity at the vent is found to be ≈ 82 m . s − 1 "> ≈ 82 m . s − 1 and ≈ 90 m . s − 1 "> ≈ 90 m . s − 1 for the Subplinian plumes and the pre-Subplinian thermals respectively. The agreement is very good between estimates of the gas flux from modelling the plume height and those obtained from acoustic measurements, leading to a new method by which eruption physical parameters may be quantified. Furthermore, direct measurements of gas velocity can be used for better estimates of the S O 2 "> S O 2 flux released during the eruption.

Alaska↗

USGS2019

Seismo-acoustic evidence for vent drying during shallow submarine eruptions at Bogoslof volcano, Alaska

Characterizing the state of the volcanic vent is key for interpreting observational datasets and accurately assessing volcanic hazards. This is particularly true for remote, complex eruptions such as the 2016–2017 Bogoslof volcano, Alaska eruption sequence. Bogoslof’s eruptions in this period were either shallow submarine or subaerial, or some combination of both. Our results demonstrate how low-frequency sound waves (infrasound), integrated with seismic and satellite data, can provide unique insight into shallow vent processes, otherwise not available. We use simple metrics, such as the infrasound frequency index (FI), event duration, and acoustic-seismic amplitude ratio, to look at changes in the elastic energy radiation and infer changes in seawater access to the vent. Satellite imagery before and after selected eruptions is used to ground-truth inferences on vent conditions. High FI and gradual increases in infrasound frequency content at Bogoslof correspond with transitions from submarine to subaerial vent conditions and a diminished or absent role of water, likely resulting in a drying out of the vent region. Event durations generally correlate with high FI and the range of FI values for each event, suggesting long duration events were more effective at drying out the vent region. A trend from low to high acoustic-seismic amplitude ratios for some long duration events also suggests an increase in acoustic efficiency as the vent dried out. We demonstrate that infrasound can serve as a robust indicator of seawater involvement for Bogoslof and other shallow submarine eruptions that may not be inferable from other datasets, particularly in near-real-time.

Alaska↗

USGS1969

The determination of the acoustic parameters of volcanic rocks from compressional velocity measurements

A statistical analysis was made of the relationship of various acoustic parameters of volcanic rocks to compressional wave velocities for data obtained in a volcanic region in Nevada. Some additional samples, chiefly granitic rocks, were also included in the study to extend the range of parameters and the variety of siliceous rock types sampled. Laboratory acoustic measurements obtained on 62 dry core samples were grouped with similar measurements obtained from geophysical logging devices at several depth intervals in a hole from which 15 of the core samples had been obtained. The effects of lithostatic and hydrostatic load on changing the rock acoustic parameters measured in the hole were noticeable when compared with the laboratory measurements on the same core. The results of the analyses determined by grouping all of the data, however, indicate that dynamic Young's, shear and bulk modulus, shear velocity, shear and compressional characteristic impedance, as well as amplitude and energy reflection coefficients may be reliably estimated on the basis of the compressional wave velocities of the rocks investigated. Less precise estimates can be made of density based on the rock compressional velocity. The possible extension of these relationships to include many siliceous rocks is suggested.

International Journal of Rock Mechanics and Mining↗

USGS2004

Acoustic and optical borehole-wall imaging for fractured-rock aquifer studies

Imaging with acoustic and optical televiewers results in continuous and oriented 360° views of the borehole wall from which the character, relation, and orientation of lithologic and structural planar features can be defined for studies of fractured-rock aquifers. Fractures are more clearly defined under a wider range of conditions on acoustic images than on optical images including dark-colored rocks, cloudy borehole water, and coated borehole walls. However, optical images allow for the direct viewing of the character of and relation between lithology, fractures, foliation, and bedding. The most powerful approach is the combined application of acoustic and optical imaging with integrated interpretation. Imaging of the borehole wall provides information useful for the collection and interpretation of flowmeterand other geophysical logs, core samples, and hydraulic and water-quality data from packer testing and monitoring.

Journal of Applied Geophysics↗

USGS2009

Acoustic estimates of abundance and distribution of spawning lake trout on Sheboygan Reef in Lake Michigan

Efforts to restore self-sustaining lake trout ( Salvelinus namaycush ) populations in the Laurentian Great Lakes have had widespread success in Lake Superior; but in other Great Lakes, populations of lake trout are maintained by stocking. Recruitment bottlenecks may be present at a number of stages of the reproduction process. To study eggs and fry, it is necessary to identify spawning locations, which is difficult in deep water. Acoustic sampling can be used to rapidly locate aggregations of fish (like spawning lake trout), describe their distribution, and estimate their abundance. To assess these capabilities for application to lake trout, we conducted an acoustic survey covering 22 km 2 at Sheboygan Reef, a deep reef (<40 m summit) in southern Lake Michigan during fall 2005. Data collected with remotely operated vehicles (ROV) confirmed that fish were large lake trout, that lake trout were 1–2 m above bottom, and that spawning took place over specific habitat. Lake trout density exhibited a high degree of spatial structure (autocorrelation) up to a range of ~190 m, and highest lake trout and egg densities occurred over rough substrates (rubble and cobble) at the shallowest depths sampled (36–42 m). Mean lake trout density in the area surveyed (~2190 ha) was 5.8 fish/ha and the area surveyed contained an estimated 9500–16,000 large lake trout. Spatial aggregation in lake trout densities, similarity of depths and substrates at which high lake trout and egg densities occurred, and relatively low uncertainty in the lake trout density estimate indicate that acoustic sampling can be a useful complement to other sampling tools used in lake trout restoration research.

Journal of Great Lakes Research↗

USGS2021

Lake sturgeon (Acipenser fulvescens) annual adult survival estimated from acoustic telemetry

Survival of adult fishes is critical to the conservation and management of wild populations, particularly for long-lived, slow to reproduce species. Most sturgeon species are of conservation concern, but their long lifespans and large ranges have made estimation of adult survival rates challenging. In this study, acoustic telemetry was used to track 205 lake sturgeon ( Acipenser fulvescens ) tagged in the St. Clair and Detroit rivers of the Laurentian Great Lakes over seven years (2012–2019). The objective of this study was to determine if annual survival was related to sex, size, tagging location (river), or year post-tagging using Cormack-Jolly-Seber (CJS) models. Annual survival was high among all seven years (range of point estimates: 95–99%) and did not differ based on sex, tagging year, size at time of tagging, or tagging location. Lake sturgeon detection probability on acoustic receivers was high each year (range of point estimates: 82–99%) and increased as the number of receivers in the system increased. High survival rates of lake sturgeon were consistent with levels thought required for lake sturgeon to be self-sustaining in the St. Clair – Detroit river system. Our application of acoustic telemetry detections as input to CJS models demonstrated the usefulness of this approach and should be considered for population assessment studies throughout the Great Lakes and beyond.

Michigan↗

USGS2019

Seismic and acoustic signatures of surficial mass movements at volcanoes

Surficial mass movements, such as debris avalanches, rock falls, lahars, pyroclastic flows, and outburst floods, are a dominant hazard at many volcanoes worldwide. Understanding these processes, cataloging their spatio-temporal occurrence, and detecting, tracking, and characterizing these events would advance the science of volcano monitoring and help mitigate hazards. Seismic and acoustic methods show promise for achieving these objectives: many surficial mass movements generate observable seismic and acoustic signals, and many volcanoes are already monitored. Significant progress has been made toward understanding, modeling, and extracting quantitative information from seismic and infrasonic signals generated by surficial mass movements. However, much work remains. In this paper, we review the state of the art of the topic, covering a range of scales and event types from individual rock falls to sector collapses. We consider a full variety of volcanic settings, from submarine to subaerial, shield volcano to stratovolcano. Finally, we discuss future directions toward operational seismo-acoustic monitoring of surficial mass movements at volcanoes.

Journal of Volcanology and Geothermal Research↗

USGS2020

Maximum entropy derived statistics of sound speed structure in a fine-grained sediment inferred from sparse broadband acoustic measurements on the New England continental shelf

Marginal probability distributions for parameters representing an effective sound-speed structure of a fine-grained sediment are inferred from a data ensemble maximum entropy method that utilizes a sparse spatially distributed set of received pressure time series resulting from multiple explosive sources in a shallow-water ocean environment possessing significant spatial variability of the seabed. A remote sensing seabed acoustics experiment undertaken in March 2017 off the New England Shelf was designed so that multiple independent analyses could infer the statistical properties of the seabed. The current analysis incorporates the measured horizontal variability from interpretations of a subbottom profiling survey of the experimental area. An idealized range- and azimuth-dependent parameterization of the seabed is derived from identification of horizons within the seabed that define multiple sediment layers. A sparse set of explosive charges were deployed on circular tracks with radii of about 2, 4, and 6.5 km with an acoustic array at the center to correlate a set of random measurements to physical acoustic processes that characterize the seabed. The mean values of a surface sound speed ratio and a linear sound speed gradient for the fine-grained sediment layer derived from 12 data samples processed in the 25–275-Hz band provide an estimate of the effective sound-speed structure in a 130-km $^2$ area. The inferred sediment sound speed values are evaluated by predicting measured time series data not used in the statistical inference, and are also compared to historical measurements. Finally, the low-frequency maximum entropy estimate of the sediment sound speed along with physical measurements derived from piston core measurements are utilized to estimate the sediment grain bulk modulus. predictions made by the viscous grain shearing model.

Maine, Vermont, New Hampshire, Massachusetts, Rhod↗

USGS2023

Positioning aquatic animals with acoustic transmitters

Geolocating aquatic animals with acoustic tags has been ongoing for decades, relying on the detection of acoustic signals at multiple receivers with known positions to calculate a 2D or 3D position, and ultimately recreate the path of an aquatic animal from detections at fixed stations. This method of underwater geolocation is evolving with new software and hardware options available to help investigators design studies and calculate positions using solvers based predominantly on time-difference-of-arrival and time-of-arrival. We provide an overview of the considerations necessary to implement positioning in aquatic acoustic telemetry studies, including how to design arrays of receivers, test performance, synchronize receiver clocks and calculate positions from the detection data. We additionally present some common positioning algorithms, including both the free open-source solvers and the ‘black-box’ methods provided by some manufacturers for calculating positions. This paper is the first to provide a comprehensive overview of methods and considerations for designing and implementing better positioning studies that will support users, and encourage further knowledge advances in aquatic systems.

Methods in Ecology and Evolution↗

USGS2009

Defining winter trophic habitat of juvenile Gulf Sturgeon in the Suwannee and Apalachicola rivermouth estuaries, acoustic telemetry investigations

Three automated listening post-telemetry studies were undertaken in the Suwannee and Apalachicola estuaries to gain knowledge of habitats use by juvenile Gulf Sturgeons ( Acipenser oxyrinchus desotoi ) on winter feeding grounds. A simple and reliable method for external attachment of small acoustic tags to the dorsal fin base was developed using shrink-tubing. Suspending receivers on masts below anchored buoys improved reception and facilitated downloading; a detection range of 500–2500 m was realized. In the Apalachicola estuary, juvenile GS stayed in shallow water (< 2 m) within the estuarine transition zone all winter in the vicinity of the Apalachicola River mouth. Juvenile GS high-use areas did not coincide with high density benthic macrofauna areas from the most recent (1999) benthos survey. In the Suwannee estuary, juveniles ranged widely and individually throughout oligohaline to mesohaline subareas of the estuary, preferentially using mesohaline subareas seaward of Suwannee Reef (52% of acoustic detections). The river mouth subarea was important only in early and late winter, during the times of adult Gulf Sturgeon migrations (41% of detections). Preferred winter feeding subareas coincided spatially with known areas of dense macrofaunal benthos concentrations. Following a dramatic drop in air and water temperatures, juvenile GS left the river mouth and estuary, subsequently being detected 8 km offshore in polyhaline open Gulf of Mexico waters, before returning to the estuary. Cold-event offshore excursions demonstrate that they can tolerate full-salinity polyhaline waters in the open Gulf of Mexico, for at least several days at a time. For juvenile sturgeons, the stress and metabolic cost of enduring high salinity (Jarvis et al., 2001; McKenzie et al., 2001; Singer and Ballantyne, 2002) for short periods in deep offshore waters seems adaptively advantageous relative to the risk of cold-event mortality in shallow inshore waters of lower salinity. Thus, while juveniles can tolerate high salinities for days to weeks to escape cold events, they appear to make only infrequent use of open polyhaline waters. Throughout the winter foraging period, juvenile GS stayed primarily within the core area of Suwannee River mouth influence, extending about 12 km north and south of the river mouth, and somewhat seaward of Suwannee Reef (< 5 km offshore). None were detected departing the core area past either of the northern or southern acoustic gates, located 66 and 52 km distant from the river mouth, respectively.

Florida↗