USGS Science⌕ Search

SEARCH · USGS Science

Results for “Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,027 records · Page 57Linked to original sources

Geology of the Hawaiian islands

A brief summary of the geography, climate, and geomorphology is given. Streams develop slowly after the extinction of a volcano because of the high permeability of the rock. Once established they cut rapidly because of the steep slopes and fractured condition of the rock. Stream erosion varies enormously on different slopes of the same mountain due to the great differences in rainfall and to other causes. Six reasons are given for the development of amphitheater-headed valleys. Marine erosion has formed cliffs as much as 1,000 feet high on the leeward side and 3,000 feet high on the windward side of some of the domes. The islands have undergone a complex series of emergences and submergences leaving marine fossiliferous limestone up to 1,070 feet above sea level and valleys drowned more than 1,200 feet. Twelve terrace levels are recognized. Some are definitely eustatic. A synopsis is given of the present knowledge of the geology of each volcanic mountain, as well as a table of the rock units, and geologic maps of all major islands. The volcanoes pass through four major phases between birth and extinction and are built around one minor and two major rift zones. The volcanoes began their history above sea level in the Tertiary. Most of them became dormant either before or during the early Quaternary. Activity was renewed in the late Quaternary. Mauna Kea was glaciated in the late Pleistocene. The character of each islet in the archipelago is tabulated.

Hawaii↗

Geology and ground-water resources of Cerro Gordo County, Iowa

The basic geologic framework underlying Cerro Gordo County consists of an igneous or metamorphic Precambrian basement complex overlain by, in ascending order, consolidated sedimentary rocks of Precambrian, Cambrian, Ordovician, Devonian, Mississippian, and Cretaceous age, and unconsolidated sand, gravel, and clay of Quaternary age. Structurally the county is in the northern part of the Iowan Basin, and the sedimentary units of Cambrian through Devonian age dip southward at 9 to 14 feet per mile. Three major glacial advances, the Nebraskan, Kansan, and Wisconsin, covered all or part of the county during the Pleistocene Epoch and left behind glacial drift consisting of 0 to 125 feet of till and related outwash deposits. De posits of Holocene age, aside from surficial soil, are thin and scattered. Ground water occurs in the sedimentary units of Cambrian through Mississippian age and in the glacial drift and outwash deposits of Quaternary age. The chief aquifers, in ascending order, are the deep Cambrian sandstones, Jordan aquifer, St. Peter Sandstone, Devonian and Mississippian limestones and dolomites, and the Pleistocene glacial drift and related interglacial deposits. Units between the St. Peter Sandstone and the Devonian limestones, the Platteville, Decorah, Galena, and Maquoketa Formations, are of low permeability and are considered to be an aquiclude in comparison to the overlying and under lying units. The deep Cambrian sandstones will yield about 60 gpm (gallons per minute) to an individual well; the Jordan aquifer about 1,200 gpm; the St. Peter Sandstone 30 to 200 gpm; the Devonian limestones and dolomites 120 to 200 gpm; and the glacial outwash or shallow bedrock generally will yield 10 gpm or more. The Jordan aquifer supplies large quantities of water for municipal and industrial use at Mason City. Pumping tests on wells tapping the Jordan in that area show that the aquifer has a transmissibility of about 35,000 gallons per day per foot and a storage coefficient of 2 x 10 -4 Pumping in the Mason City area from 1912 to 1969 has produced about 200 feet of draw down in the areas of maximum withdrawal. Ground water in Cerro Gordo County is of suitable chemical quality for domestic, industrial, or municipal use. The total dis solved solids ranges from 152 mg/l (milligrams per liter) in water from the shallow bedrock to 885 mg/l in water from the deep Cambrian sandstones. Water from the Jordan, which is the most productive aquifer in the county, generally contains less than 500 mg/l dissolved solids. Ground water is the major source of water supplies throughout Cerro Gordo County. The majority of wells in the county are used for domestic and stock supplies, but the largest withdrawals of water are for municipal and industrial supplies. Municipal pumpage in the county in 1968 was about 1.5 billion gallons; industrial pumpage was about 1.8 billion gallons and most of the water was obtained from the Jordan aquifer. If future development of water from the Jordan aquifer is to be to the best economical advantage, careful consideration should be given to the location, capacity, and pumping schedules of proposed wells and nearby existing wells so that local overdevelopment or excessive interference do not occur.

Iowa↗

Ground water in Tooele Valley, Tooele County, Utah

Tooele Valley is a typical basin of the Basin and Range Province located about 30 miles southwest of Salt Lake City. It is roughly 15 miles long and 10 miles wide and has a population of about 7,000. Bordered on the west by the Stansbury Range, on the east by the Oquirrh Range, and on the south by South Mountain, it opens northward to Great Salt Lake. The bordering mountain ranges are formed by Paleozoic rocks ranging in age from Lower Cambrian to Pennsylvanian but with the Ordovician and Silurian periods unrepresented. There is no sedimentary record of the interval between Pennsylvanian and Tertiary times, and the Tertiary, Quaternary, and Recent sediments are of continental origin. These continental deposits play the dominant role in the ground-water hydrology of the basin, and were mapped and studied in detail. Pleistocene sediments are of major importance because they form the surface rock over most of the area, and give rise to conditions which yield water by artesian flow in the lower part of the valley. The development of the present land forms in this area began with the folding of Paleozoic and probably Mesozoic sediments during the Laramide revolution. The cycle of highland erosion and lowland deposition thus initiated has continued through recurrent uplift along Basin-Range faults to the present day. The principal physiographic subdivisions of the valley were developed as a result of the Basin-Range faulting, which began early in the Tertiary and has continued to Recent times. There are about 1,100 wells in Tooele Valley, about 90 per cent of which yield or have yielded water by artesian flow. Most of them are located in the lower part of the valley below an altitude of 4,400 feet. These wells and many of the springs derive their water from the unconsolidated Quaternary sediments, which include discontinuous, lenticular and commonly elongated bodies of sand, clay, gravel, and boulders of alluvial origin alternating and inter-fingered with lacustrine beds of the same materials which are more regularly stratified and better assorted. The larger springs are intimately related to the bedding planes and faults in the bedrock and alluvial formations. The well assorted sands and gravels deposited along the shore lines of Lake Bonneville are important as recharge areas for the artesian reservoir.

Utah↗

Major thermal springs of Utah

As part of a study of the springs of Utah, reconnaissance data were obtained on the thermal, chemical, and geologic characteristics of the major thermal springs or Utah. Only three of the springs have temperatures near the boiling point of water; the maximum recorded temperatures of these springs range from 185° to 189° F. All three springs are in or near areas of late Tertiary or Quaternary volcanism. Temperatures of the thermal springs studied ranged from 68° to 189° F. Nearly all thermal springs in Utah are in or near fault zones. Very few of these springs issue from volcanic rocks, but several springs are close to areas of late Tertiary or Quaternary volcanic rocks.

Utah↗

Right-lateral fault motion along the slope-basin transition, Gulf of Santa Catalina, southern California

An active fault system carrying a significant component of right-lateral strike-slip motion extends for ~60 km along the slope–basin transition, ~10 to 20 km offshore of the southern California coast from La Jolla to Dana Point. From south to north, this fault system includes the Carlsbad, San Onofre, and San Mateo fault zones. High-resolution single channel minisparker and chirp seismic reflection data gathered from 2006 to 2011 reveal complex and variable fault zones that are generally characterized by nearly vertical to steeply east-dipping faults with a reverse slip component. The Carlsbad fault zone shows evidence of reverse motion followed by normal separation and probably also includes a component of strike-slip offset. The San Onofre fault zone shows clear evidence of right-lateral slip, offsetting submarine gullies near the base of the slope by approximately 60 m. North of these offset gullies, the base of the slope bends about 30° to the west, following the trend of the San Mateo fault zone, but strands of the San Onofre fault zone trend obliquely up slope, appearing to merge with the Newport–Inglewood fault zone at the shelf edge. These San Onofre fault strands consist of several en echelon left-stepping segments separated by “pop-up” structures, which imply a significant component of right-lateral offset that may serve to transfer right-lateral slip from faults along the base of the slope to the Newport–Inglewood fault zone. Using approximate base Quaternary and base Holocene reflections, segments of the Carlsbad and San Onofre fault zones appear to have experienced right-lateral motion in the Holocene, whereas deformation along the San Mateo fault zone appears to represent a period of mostly pre-Quaternary transpression.

California↗

Metallogenic provinces of southeastern Pacific region

Metalliferous mineral deposits of the southeastern Pacific region include: (1) hydrothermal, magmatic, and sedimentary deposits of the Andean region, one of the great mineral belts of the world; (2) scattered hydrothermal deposits in the Antarctic Peninsula; and (3) metal-enriched pelagic sediments and ferromanganese nodules on the seafloor. Andean metalliferous deposits, the chief topic of this report, are for the most part spatially and genetically related to calc-alkaline plutons, subvolcanic intrusions, and volcanic rocks emplaced during the Andean orogeny of Late Triassic to Quaternary age. They are components of a single metallogenic province superimposed on two or more pre-Andean metallogenic provinces of Paleozoic and Precambrian(?) age. Deposits in the Antarctic Peninsula are similar in age and origin to the deposits in the Andes and are considered to belong to the Andean province. The Andean metallogenic province may be divided into several subprovinces, each parallel with the Andes and the continental margin and each having a dominant metal or suite of metals. The central Andes of Peru, northern Chile, and Bolivia, which contain the greatest concentration of exploitable deposits and the greatest variety of ore types, have as many as five linear, partly overlapping subprovinces. These subprovinces, from west to east (Pacific coast to the eastern Andean front), are characterized, respectively, by deposits of iron, copper, polymetallic base metals, tin, and gold. Calc-alkaline plutonic and volcanic rocks of the Andes, which probably originated by partial melting in the Benioff zone, show a general, though nonuniform progression of decreasing age from west to east. Igneous rocks of Jurassic and Cretaceous age are most abundant near the coast, whereas those of Tertiary and Quaternary age dominate in the Andes. Locally, intrusive rocks and associated ore deposits of widely different ages are juxtaposed. Several sources of the metals are probable; they include oceanic crust and pelagic sediments in the Benioff zone, some of which may have been enriched previously in certain metals at the ancestral East Pacific Rise, and metal-rich zones in the overlying mantle and continental crust.

AAPG Memoir↗

The benthic foraminifera cassidulina from the Arctic Ocean: Application to paleoceanography and biostratigraphy

We investigated the morphology, biostratigraphy, shell stable isotope composition and paleogeography of the common Arctic benthic foraminifera, Cassidulina teretis (Tappan 1951) (sometimes assigned to Islandiella (Nørvang 1958), for application to Quaternary paleoceanography. Cassidulina teretis, which has been studied by several generations of Arctic foraminiferal specialists, is used in Arctic Ocean paleoceanographic reconstructions based on foraminiferal assemblages and, increasingly, isotope shell chemistry. Here we review its modern and fossil distribution including discussions of its taxonomy, ecology, biostratigraphy and shell chemistry. Cassidulina teretis Tappan 1951, originally described from the Gubik Formation, northern Alaska coastal plain, has variability in test size, apertural morphology and development of an umbilical boss representing intra- and inter-population differences across the Arctic and subarctic in modern, Quaternary and Pliocene assemblages. Nonetheless, our studies and those previously published lead us to conclude that populations from the Arctic Ocean represent a single species proposed by Tappan as Cassidulina teretis. Its modern distribution is mainly 200 to 1000 m water depth, often living within the core of the relatively warm Atlantic Layer. However, shallower occurrences suggest other factors, such as food supply, are also critical to its ecology. The Holocene distribution of Cassidulina teretis in the Beaufort Sea boundary indicate millennial-scale changes in relative abundance related to changing Atlantic Layer influence, sea-ice cover, surface productivity and food availability. There are extremely large changes in its abundance during the last deglacial interval on the Yermak Plateau, Barents Sea slope and the Laptev Sea reflecting rapid ocean changes during the Bølling-Allerød, Younger Dryas, and Preboreal. Similarly, C. teretis abundance changes during the last 300,000 years allow us to use it, at least regionally, as a useful biostratigraphic marker. The stable isotopic composition of Cassidulina teretis tests holds promise for establishing an isotope stratigraphy across the Arctic Ocean and perhaps also in the Nordic Seas, off Iceland and in the northern North Atlantic Ocean, once disequilibrium values and offsets from other Arctic benthic species are more firmly established.

Micropaleontology↗

Angler catch and harvest of targeted sportfishes in small Georgia lakes

Public fishing areas (PFAs) in Georgia are intensively managed freshwater impoundments that provide a variety of fishing opportunities to anglers. Management efforts and fishing regulations at these PFAs depend on understanding basic aspects of recreational fishing pressure, catch, and harvest. Accordingly, we conducted a roving creel survey during January – December 2013 at Marben PFA in middle Georgia to quantify sport fishing total effort, catch, harvest, and fish catch by species, number, and weight in 14 lakes. Almost all of the anglers interviewed (84% of the 1159 parties) targeted a preferred species; of these anglers, 34.7% targeted a second species, and 5.7% targeted a third species. Sunfish (Lepomis spp.) ranked highest among primary, secondary, and tertiary targeted species; whereas, channel catfish (Ictalurus punctatus) was the highest ranked quaternary targeted species. Largemouth bass (Micropterus salmoides) ranked second among primary, tertiary, and quaternary targeted species. Catches and harvest of targeted sportfish in Marben PFA varied considerably by species. Sunfish were the most abundant species by number caught (37 fish ha-1) and harvested (19 fish ha-1; 2.25 kg-1) for the entire survey period. Black crappie (Pomoxis nigromaculatus) had the lowest reported catch (2.03 ha-1) and second lowest observed harvest 0.50 kg ha-1), but largemouth bass had the lowest observed harvest in number (0.42 ha-1) and observed weight (0.41 kg ha-1). Rankings of species targeted by Marben anglers differed from those of other Georgia anglers, who targeted largemouth bass most, followed by sunfish and channel catfish. These findings imply that Georgia PFA fishery managers may give consideration to site-specific management objectives when developing or managing local fisheries, rather than relying on state summary statistics. The smaller profile and intensive management of the Marben PFA impoundments benefited anglers of varying skill levels and backgrounds equally, making it an ideal setting for recruiting new anglers while still challenging experienced anglers.

Georgia↗

Hydrogeologic framework of the Red River alluvial aquifer and Carrizo-Wilcox aquifer in northwestern Louisiana

Groundwater in northwestern Louisiana is a valuable resource needed for expanding public-supply needs as well as possible energy development needs arising from Haynesville Formation natural-gas production. The Red River alluvial and the Carrizo-Wilcox aquifers are two of the most important and heavily pumped aquifers in northwestern Louisiana; however, little documentation of the regional hydrogeologic framework is available. The U.S. Geological Survey and the Louisiana Department of Transportation and Development have consolidated information from, and built upon, previous studies of the Red River alluvial and the Carrizo-Wilcox aquifers to characterize and document the regional hydrogeologic framework of northwestern Louisiana. The study area has been tectonically modified and includes abundant structural features such as salt domes and areally extensive faulting in addition to minor folding related to these features, all of which impact the sedimentological and hydraulic characteristics of the freshwater-bearing strata. The hydrogeologic framework of northwestern Louisiana comprises a sequence of structurally modifi ed, complexly interbedded, varyingly interconnected, clayey, sandy, and gravelly alluvial sediments. The important freshwater hydrogeologic units include the Quaternary Red River alluvial and upland terrace aquifers, and the underlying Tertiary Sparta, Cane River, and Carrizo-Wilcox aquifers. The Midway confining unit underlies the Carrizo-Wilcox aquifer throughout the study area. No freshwater is present in or below the Midway Group. Tertiary-age formations exposed at land surface in the study area have been incised by the Red River and are hydraulically connected to the Quaternary Red River alluvium in the Red River valley. In 2010, 7.73 million gallons per day (Mgal/d) of water were withdrawn from the Red River alluvial aquifer in the study area, representing an increase of 2.00 Mgal/d, or about 35 percent, over 2005 withdrawal rates. The Tertiary Carrizo Sand and Wilcox Group crop out across much of the study area. The two units are hydraulically connected and function as a single hydrologic unit referred to as the Carrizo-Wilcox aquifer. In 2010, 19.33 Mgal/d of water were withdrawn from the Carrizo-Wilcox aquifer in the study area, representing an increase of nearly 1.8 Mgal/d, or about 10 percent, over 2005 withdrawal rates. Any expansion in energy development, as well as water needs of an increasing population, could result in an increased demand on groundwater in northwestern Louisiana.

Louisiana↗

Blue Ribbon Lineament, an east-trending structural zone within the Pioche mineral belt of southwestern Utah and eastern Nevada

The Blue Ribbon lineament is an east-west structural zone that is about 25 kilometers wide and passes through the Pioche mineral belt at about 38°10' N. It is best known in Utah, where it is at least 190 km long, and extends from the southern Sevier Plateau in the High Plateaus westward and across southern Mountain Home (Needle) Range in the Great Basin. It probably continues westward an additional 170 km into Nevada, where it connects with the eastern end of the 230-km Warm Springs lineament. The Blue Ribbon lineament is defined by range terminations and east-trending valleys, alinement of eruptive centers of middle Miocene (20 million years) to Pliocene(?) (5-1.8 m.y.) alkalic rhyolite, alinement of areas of middle Miocene to Pliocene mineralized rocks (mostly fluorine, uranium, tungsten) and hydrothermally altered rocks, east-trending magnetic highs and interruptions of magnetic anomalies, and east-striking basin-range faults of late Tertiary and Quaternary age. Mountains south of the lineament are topographically and structurally lower than those to the north. North-striking Quaternary basin-range faults, the Thermo hot springs area, several warm springs and former hot springs, and numerous dacitic to andesitic volcanic centers of early to middle Miocene age (26-20 m.y.) occur along the lineament. The Blue Ribbon lineament is believed to be a deep crustal fault zone dating from at least middle Miocene time and possibly much earlier. It thus developed generally coincident with northerly trending classical basin-range faults. Its fracture system was an important, long-lived conduit for mineralizing fluids, and it should be an attractive target for minerals exploration in the future. The lineament could be due to an east-trending warp in the subducting mantle plate, or it could be part of a past or present intracontinental transform fault that locally gets younger eastward and dies out eastward in the western Colorado Plateaus province.

Utah↗

Geophysical characterization of seismic station sites in the United States – The importance of a flexible, multi-method approach

Noninvasive geophysical site characterization methods were used in two recent projects to obtain shear-wave velocity (VS) profiles to a minimum depth of 30 m and the time-averaged VS of the upper 30 meters (VS30) at seismic station sites. These projects include the 2009 American Recovery and Reinvestment Act (ARRA) funded U.S. Geological Survey site characterization project for 191 sites in California and the Central-eastern United States (CEUS), and the 2012 Electric Power Research Institute (EPRI) funded project for 33 additional CEUS sites. These sites are located in rural to urban settings with topographic conditions ranging from relatively flat sedimentary basins to mountaintop ridges. About 60 percent of the ARRA sites and 80 percent of the EPRI sites are located on rock or have thin sediment cover over rock, including Quaternary volcanic rock, Tertiary sediments and sedimentary rock, and Mesozoic (or older) crystalline or sedimentary rock. The remaining sites consist of thick sequences of Quaternary sediments overlying older sediments and rock. ARRA sites were characterized using non-invasive active and passive surface-wave methods, including the horizontal-tovertical spectral ratio (HVSR) method and one or more of the following: spectral analysis of surface waves (SASW), multichannel analysis of surface waves (MASW; Rayleigh and Love waves) and, occasionally, array microtremor (linear and 2-D arrays) methods. P-wave seismic refraction data were also acquired at rock and shallow-rock sites. S-wave seismic refraction and/or Love-wave MASW methods were applied at sites where characterization proved difficult with Rayleighwave methods. Based on our experience from the ARRA project, we acquired Rayleigh- and Love-wave based MASW and P- and S-wave refraction data for the EPRI project at CEUS sites. The HVSR method was found to be useful for identifying shallow-rock sites and for evaluating the relative variability of the depth-to-rock interface beneath the seismic station and the testing array(s). The fundamental mode modeling assumption was generally valid at most of these sites; nevertheless, multi-mode or effective-mode modeling routines were occasionally required, particularly in the case of shallow high-velocity layers. Deep sediment sites were characterized using active and, when appropriate, passive surface-wave based methods. Rock and shallow sediment sites were generally more challenging to characterize than deep sediment sites. About 10 percent of rock sites could not be characterized using surface wave methods, thus these sites were characterized using body-wave refraction methods. Love wave methods were found to be more effective than Rayleigh wave methods at some rock and shallow-rock sites (e.g., sites with shallow rock and sites with a thin low-velocity, highly attenuating surface layer). Lateral velocity variability was found to be very common at rock and shallow-rock sites, often causing significant scatter in the surface-wave dispersion data. Seismic refraction models have demonstrated that it may not be unusual for VS30 to vary by 20 percent, or more, over small distances (several tens of meters) at such sites. Based on these experiences, it is important to consider the application of combinations of methods when using noninvasive geophysical approaches to characterize seismic site conditions.

Conference Paper↗

Structural setting and geothermal potential of northeastern Reese River Valley, north-central Nevada: Highly prospective detailed study site for the INGENIOUS project

The northeastern part of the Reese River basin situated ~15 km southeast of Battle Mountain, Nevada, scored highly in the Nevada geothermal play fairway analysis (PFA) for hosting potential hidden geothermal systems. This site (also referred to as Argenta Rise) was therefore chosen for detailed study in the INGENIOUS project (INnovative Geothermal Exploration through Novel Investigations Of Undiscovered Systems). The high PFA scores resulted primarily from favorable structural settings (e.g., fault intersections and pull aparts) with relatively high slip rates on Quaternary faults. The INGENIOUS project is utilizing additional parameters and more rigorous analytical techniques to further advance exploration at this site. This includes integration of geological (e.g., Quaternary fault mapping) and new geophysical datasets (e.g., gravity, magnetics, MT data, and five reprocessed seismic reflection profiles) to build a structural model and to identify specific favorable sites for potential geothermal upwellings. Two-meter temperature surveys were also conducted in the area (139 measurements). This part of north-central Nevada is characterized by systems of intersecting northerly and ENE-striking faults within the broader Humboldt structural zone, a poorly understood belt of ENE-striking faults and relatively high heat flow extending across northern Nevada. Kinematic analysis of exposed fault surfaces shows that ENE-striking faults have accommodated sinistral-normal slip, and normal slip characterizes N- to NNE-striking faults. Northeastern Reese River Valley lies within a broad left step between major ENE-striking fault zones on the northern flanks of the Argenta Rim and Shoshone Range and thus corresponds to a broad pull-apart in the ENE-striking sinistral-normal fault system. Notably, the nearby Beowawe geothermal system in Whirlwind Valley (with abundant sinter, hot springs, and a geothermal power plant) occupies a fault intersection in a relatively small left step in a major ENE-striking sinistral-normal fault and may serve as an analogue for a potential hidden system in northeastern Reese River Valley. Existing geological maps, high-resolution lidar, and seismic reflection data demonstrate that northeastern Reese River Valley is structurally complex with multiple intersections between the ENE- and N- to NNE-striking fault systems. Some of these fault intersections correspond to low resistivity anomalies, magnetic lows, and/or very subtle 2-m temperature anomalies, which may indicate hidden geothermal upwellings. Three-dimensional modeling and temperature-gradient drilling are planned to further evaluate these sites for geothermal activity.

Nevada↗

History of terrestrial ecosystem development in southern Alexander Archipelago, Alaska since the onset of deglaciation

This chapter focuses on reconstructing the history of vegetation development in southern Alexander Archipelago (AA) of southeast Alaska during and after deglaciation up to the present day. It also summarizes key findings from recent paleoceanographic research in the Gulf of Alaska to provide a detailed, well-dated record of late Quaternary climate changes for the region. Understanding the regional climate history contributes to the reconstruction of late Quaternary glacial history and the timing of deglaciation, as it establishes minimum limiting dates for possible human occupation of southeast Alaska and northern coastal British Columbia (BC). This regional climate history is essential for recognizing relationships between the timing of climate changes and major ecological changes, and subsequent cultural development and adaptations. The reconstructed vegetation history of southern Alexander Archipelago since the onset of deglaciation provides important insights into the resources available to the earliest settlers and how these resources changed over time. The vegetation history presented here is based on dated pollen records from five unpublished sites and two previously published sites from the region. These records establish the timing and nature of changing terrestrial ecosystems in the southern AA.

Alaska↗

Seismic source characterization in central and eastern United States

This report documents earthquake geology studies conducted in the central and eastern United States (CEUS) between 2018 and 2023. The overarching goal of the earthquake geology studies was to identify and characterize fault sources in the New Madrid seismic zone, the eastern Tennessee seismic zone, and the Charleston seismic zone. These studies primarily relied on the interpretation of high-resolution topography, morphotectonic analysis of 10-meter (m) digital elevation models, field reconnaissance, and integration with new and existing subsurface datasets. Results from each study are placed into a seismic hazard framework. The first two chapters focus on the New Madrid seismic zone, which is the most seismically active region in the CEUS, to better characterize the southern extent of the Reelfoot fault in the Obion River valley, and identify and characterize proposed faults along the margins of Crowleys Ridge in the center of the Mississippi River embayment. Crowleys Ridge is a ~320-kilometer (km) long landform that has been proposed to be formed by intermittent faulting or erosion from the Mississippi River. Legacy seismic reflection data documented Eocene, Mesozoic, and older strata offset by faults on the margins of the ridge (Van Arsdale et al., 1999). A morphotectonic analysis of the topography along Crowleys Ridge indicated southward increases in catchment hypsometric integral and slope. Neotectonic mapping on high-resolution lidar data revealed a series of subparallel linear fault and fold scarps along the margins of Crowleys Ridge. These scarps offset previously mapped fluvial and alluvial surfaces that were <56 thousand years ago (ka) (Rittenour et al., 2007). Integration of new seismic reflection and airborne electromagnetic data, legacy seismic data, with the landscape morphotectonic analysis and neotectonic mapping supports the interpretation that Crowleys Ridge is bound by faults that have been active in the late Quaternary but do not experience modern seismicity. By placing these newly characterized faults into the regional framework, the Crowleys Ridge faults can be interpreted as thrust faults associated with stepovers in the overall dextral fault system, similar to the Reelfoot fault. The results of these studies indicate that seismicity has migrated eastward during the late Quaternary, with the Reelfoot fault accommodating much of the modern-day strain. The Reelfoot fault ruptured in the 1811-1812 New Madrid earthquake sequence (Fuller, 1912) and has a record of past large earthquakes (Tuttle et al., 2002; 2019). Whereas the northern extent of the fault intersects the Mississippi River and has well-expressed surface deformation, questions remained regarding the southern limit of seismicity, deformation, and overall fault length. Analysis of <25 ka river terraces along the Obion River valley in western Tennessee revealed subtle fold scarps, with increased magnitudes of deformation on progressively older terraces, indicative of a longer record of fault movement than has been documented by paleoseismic and paleoliquefaction studies alone (e.g., Kelson et al., 1996; Gold et al., 2019; Tuttle et al., 2019). The third chapter integrates surface and subsurface data to assess the landscape record of surface deformation in the eastern Tennessee seismic zone (ETSZ), which is the second most seismically active region in the CEUS. Seismicity in the ETSZ is deep (5-26 km) and focused in the Proterozoic rock below the Paleozoic detachment. Although the region has experienced moderate (≤ Mw 4.8) seismicity in the instrumental record, the lack of a large historical earthquake and limited paleoseismic and paleoliquefaction evidence of prehistoric large ground shaking events have made seismic hazard characterization of the region challenging. Two models have emerged to predict the style and orientation of active surface deformation in the ETSZ. One suggests that surface rupturing earthquakes would exploit pre-existing faults along the regional structural grain (Cox et al., 2022). The second model advocates for primarily strike-slip motion on east-west or north-south faults, following analyses of recent seismicity (Chapman et al., 1997; Dunn and Chapman, 2006; Daniels and Peng, 2022) and the modern stress field (Levandowski et al., 2018). In our analysis, neotectonic mapping of high-resolution lidar data reveals a concentration of lineaments with east-west orientations, with some corresponding to previously mapped east-west faults that crosscut the northeast-southwest regional structural grain from the Paleozoic orogeny. A morphotectonic analysis of catchments and river segments within the same lithology indicates subtle differences that may be indicative of a longer-term tectonic uplift signal. These changes in morphotectonic metrics spatially correspond to newly mapped lineaments and previously mapped east-west trending faults. Within a regional framework, we suggest that diffuse surface deformation associated with deep seismicity is accommodated on a network on east-west faults. However, further work is needed to better understand the potential late Pleistocene fault activity of these lineaments, and we propose that the ETSZ is still best characterized as an area source in seismic hazard models. The final chapter presents preliminary work to create a geographic information system (GIS) database of recent studies analyzing surface and subsurface datasets and interpretations in the Charleston seismic zone, South Carolina. This GIS database will serve as a foundation for future work to analyze new quality level 1 (QL1; <0.5 m resolution) lidar data over the 1886 magnitude (M) 7 Charleston epicentral region to identify possible fault source sources responsible for the 1886 or other surface-rupturing events. This chapter briefly summarizes three new subsurface datasets, including seismic reflection (Pratt et al., 2022; Liberty, 2022) and seismicity data (Chapman et al., 2016), and one new surface dataset (Marple and Hurd, 2020), and their interpretations of potentially active lineaments and faults in the region.

central and eastern United States↗

A multi-proxy palaeoecological and palaeoclimatic record within full glacial lacustrine deposits, western Tennessee, USA

The Fulton Section, along the Mississippi River in western Tennessee, USA, is a 1km continuous exposure (~20m vertically) of Quaternary fluvial and lacustrine deposits, inset within Eocene sediments and buried by thick loess. Fossiliferous slackwater lake sediments record maximum aggradation during the last two major glaciations, with deposition between ca. 190-140 ka and 24-18 14 C ka BP, based on amino acid and radiocarbon chronology, respectively. During the onset of full glacial conditions (ca. 24-22 14 C ka BP), a relatively permanent shallow lake environment is indicated by ostracods, aquatic molluscs, and both pollen and macrofossils of aquatic plants. By 21.8 14 C ka BP, increasing emergent plants, amphibious gastropods (Pomatiopsis) and heavier ?? 18 O compositions suggest marsh-like conditions in a periodically drying lake. The surrounding uplands consisted of Picea-Pinus woodlands mixed with cool-temperate hardwoods (e.g. Quercus, Populus, Carya), grasses and herbs. More open conditions ensued ca. 20 14 C ka BP, with loess and slopewash gradually infilling the former lake by 18 14 C ka BP. Modern analogue analyses of ostracods and palaeontological evidence imply a full glacial climate similar to today's mixed-boreal zone in central Minnesota, USA, about 98C cooler in mean annual temperature than present-day western Tennessee. Copyright ?? 2009 John Wiley & Sons, Ltd.

Journal of Quaternary Science↗

A long-term vegetation history of the Mojave-Colorado Desert ecotone at Joshua Tree National Park

Thirty-eight dated packrat middens were collected from upper desert (930–1357 m) elevations within Joshua Tree National Park near the ecotone between the Mojave Desert and Colorado Desert, providing a 30 ka record of vegetation change with remarkably even coverage for the last 15 ka. This record indicates that vegetation was relatively stable, which may reflect the lack of invasion by extralocal species during the late glacial and the early establishment and persistence of many desert scrub elements. Many of the species found in the modern vegetation assemblages were present by the early Holocene, as indicated by increasing Sørenson's Similarity Index values. C 4 grasses and summer-flowering annuals arrived later at Joshua Tree National Park in the early Holocene, suggesting a delayed onset of warm-season monsoonal precipitation compared to other Sonoran Desert and Chihuahuan Desert localities to the east, where summer rains and C 4 grasses persisted through the last glacial–interglacial cycle. This would suggest that contemporary flow of monsoonal moisture into eastern California is secondary to the core processes of the North American Monsoon, which remained intact throughout the late Quaternary. In the Holocene, northward displacement of the jet stream, in both summer and winter, allowed migration of the subtropical ridge as far north as southern Idaho and the advection of monsoonal moisture both westward into eastern California and northward into the southern Great Basin and Colorado Plateau.

Colorado↗

The Anthropocene as an event, not an epoch

Over the course of the last decade the concept of the Anthropocene has become widely established within and beyond the geoscientific literature but its boundaries remain undefined. Formal definition of the Anthropocene as a chronostratigraphical series and geochronological epoch following the Holocene, at a fixed horizon and with a precise global start date, has been proposed, but fails to account for the diachronic nature of human impacts on global environmental systems during the late Quaternary. By contrast, defining the Anthropocene as an ongoing geological event more closely reflects the reality of both historical and ongoing human–environment interactions, encapsulating spatial and temporal heterogeneity, as well as diverse social and environmental processes that characterize anthropogenic global changes. Thus, an Anthropocene Event incorporates a substantially wider range of anthropogenic environmental and cultural effects, while at the same time applying more readily in different academic contexts than would be the case with a rigidly defined Anthropocene Series/Epoch.

Journal of Quaternary Science↗