USGS Science⌕ Search

SEARCH · USGS Science

Results for “Energy”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 973 records · Page 54Linked to original sources
USGS2013

Water resources and shale gas/oil production in the Appalachian Basin: critical issues and evolving developments

Unconventional natural gas and oil resources in the United States are important components of a national energy program. While the Nation seeks greater energy independence and greener sources of energy, Federal agencies with environmental responsibilities, state and local regulators and water-resource agencies, and citizens throughout areas of unconventional shale gas development have concerns about the environmental effects of high volume hydraulic fracturing (HVHF), including those in the Appalachian Basin in the northeastern United States (fig. 1). Environmental concerns posing critical challenges include the availability and use of surface water and groundwater for hydraulic fracturing; the migration of stray gas and potential effects on overlying aquifers; the potential for flowback, formation fluids, and other wastes to contaminate surface water and groundwater; and the effects from drill pads, roads, and pipeline infrastructure on land disturbance in small watersheds and headwater streams (U.S. Government Printing Office, 2012). Federal, state, regional and local agencies, along with the gas industry, are striving to use the best science and technology to develop these unconventional resources in an environmentally safe manner. Some of these concerns were addressed in U.S. Geological Survey (USGS) Fact Sheet 2009–3032 (Soeder and Kappel, 2009) about potential critical effects on water resources associated with the development of gas extraction from the Marcellus Shale of the Hamilton Group (Ver Straeten and others, 1994). Since that time, (1) the extraction process has evolved, (2) environmental awareness related to high-volume hydraulic fracturing process has increased, (3) state regulations concerning gas well drilling have been modified, and (4) the practices used by industry to obtain, transport, recover, treat, recycle, and ultimately dispose of the spent fluids and solid waste materials have evolved. This report updates and expands on Fact Sheet 2009–3032 and presents new information regarding selected aspects of unconventional shale gas development in the Appalachian Basin (primarily Virginia, West Virginia, Maryland, Pennsylvania, Ohio, and New York). This document was prepared by the USGS, in cooperation with the U.S. Department of Energy, and reviews the evolving technical advances and scientific studies made in the Appalachian Basin between 2009 and the present (2013), addressing past and current issues for oil and gas development in the region.

Maryl;New York;Ohio;Pennsylvania;Virginia;West Vir↗
USGS2023

Monitoring of wave, current, and sediment dynamics along the Chincoteague living shoreline, Virginia

Nature-based features, also called living shorelines, are increasingly applied in coastal protection and restoration. However, the processes and mechanisms (feedbacks and interactions) of wave attenuation, current velocity change, and sediment deposition and erosion along the living shoreline remain unclear, thus limiting the adaptive management of living shoreline restoration projects for coastal shoreline resilience under future storm conditions. In this study, wave, current, and sediment dynamics along the Little Toms Cove living shoreline, Chincoteague National Wildlife Refuge, Virginia, a low wave energy environment, were investigated during a 2-month winter period in 2019 to examine the effects of living shoreline structures on shoreline protection and oyster habitat enhancement. It was found that wave attenuation by the living shoreline structures (oyster castles or constructed oyster reefs) is dependent on water depth, wind speed, wind direction, and local bathymetry. Analysis of observed data indicate that the oyster castles along the Little Toms Cove living shoreline play a limited role in wave attenuation in this low wave energy environment. During the 2-month winter period, wave energy was attenuated by 39.7 percent when oyster castles were emergent or slightly submerged with southwest winds. In contrast, when the oyster castles were fully submerged, wave energy behind the oyster castles increased by 38.6 percent. The construction of oyster castles affected circulation patterns with increase or decrease in velocity at nearshore waters protected by the castles depending on locations of measurements in relation to the oyster castles. Bottom shear stress analysis indicates that tidal currents play a larger role than waves on shoreline and marsh edge erosion along the Little Toms Cove shoreline during the 2 months of field monitoring. The oyster castles protecting the marsh edge and tidal flat from erosion resulted in higher fine sediment concentration in the water column landward of the castles because more sediment was retained in the lee side of the castles. It is important to maximize sediment within the wetlands and adjacent mudflats behind the oyster castles. Erosion from the marsh edge and interior serves as the major source of sediment for this wetland system due to the limited sediment supply in Assateague Channel. Furthermore, it was found that the oyster castles along the Little Toms Cove living shoreline were inundated more than 60 percent of the time, leading to the enhanced oyster habitat as evidenced by suitable velocity (less than 10 centimeters per second) and mean grain size (less than 0.08 millimeters) for oyster feeding and the increased oyster shell density and growth in the intertidal zone protected by the castles than in the control area. More field data (for example, concurrent monitoring of sediment concentration and salinity) over other seasons (for example, summer) could help examine the long term and combined engineering and ecological benefits of living shoreline restoration projects under seasonal and enhanced future storm conditions.

Virginia↗
USGS2023

California State waters map series—Benthic habitat characterization in the region offshore of Morro Bay, California

Coastal and Marine Ecological Classification Standard geoform, substrate, and biotic component geographic information system products were developed for the California State waters of south-central California in the region offshore of Morro Bay. The study was motivated by interest in development of offshore wind-energy capacity and infrastructure in Federal waters offshore. The Bureau of Ocean Energy Management, in coordination with the State of California and many other members of the California Intergovernmental Renewable Energy Task Force, issued calls for information in 2018 for the study area offshore of Morro Bay, California. The study area is adjacent to a nuclear power plant (currently scheduled for decommissioning) with a developed electric grid connection, and in an area of high wind resource potential. The Bureau of Ocean Energy Management is the lead agency responsible for planning and leasing in the U.S. Exclusive Economic Zone and funded this project to assess baseline conditions of, and the potential effects on, the seafloor environment. This project, carried out by the U.S. Geological Survey, resulted in three data releases for individual map blocks that are part of the California State Waters Map Series: (1) Offshore of Point Estero, (2) Offshore of Morro Bay, and (3) Offshore of Point Buchon. The study area consists of 341 square kilometers (km 2 ) of multibeam echo sounder (MBES) data acquired by Fugro, Inc., in 2010. Towed camera-sled video was acquired in 2012 to supervise the classification of the MBES data into habitats. There were 935 annotations of organisms and habitat made from 22 video transects. Using video observations of habitat as ground truth, derivatives of the MBES data were classified into 3 seafloor character types (hard-rugged, hard-flat, and soft-flat), 25 modifier groups, and 9 geoforms. The study area substrate is predominantly soft-flat sediment (mud and fine sand) covering 191.3 km 2 (56.1 percent) of the area. Hard-flat substrate areas, predominantly coarse sediment in scour depressions, cover 52.2 km 2 (15.3 percent) of the study area. The hard-rugged substrate areas are primarily outcrops of layered sedimentary bedrock and constitute 97.5 km 2 of the study area (28.6 percent). After classification of bathymetry and backscatter raster images according to substrate, false-positive hard areas produced by noise artifacts were removed by manual editing. Nine geoforms were then identified in the analysis. The predominant geoforms mirror the seafloor character results, shelf geoforms (flat areas covered in soft sediment), rock outcrop geoforms (hard, rugged areas), and scour depression geoforms (flat areas covered in coarse sediment formed by bottom currents).

California↗
USGS1976

Stratigraphy and petroleum possibilities of lower Upper Devonian (Frasnian and lower Famennian) strata, Southwestern Utah

The lower Upper Devonian rocks in southwestern Utah--the Guilmette Formation and equivalents--represent a final regressive pulse of the major Late Devonian marine inundation of the Western Interior of the United States and record marine carbonate deposition on a wide continental shelf. They consist primarily of limestone, dolomite, and quartz arenite deposited in a shallow north-trending miogeosyncline, which constituted a single major basin of accumulation on this shelf. The Guilmette Formation and equivalents were deposited in shallow normal to hypersaline marine waters. The environments of deposition include: a moderate- to high-energy intertidal environment, a moderate-energy subtidal environment, a lower energy, deeper subtidal environment below effective wave base, and a high-energy environment in local shallow areas of mud mounds and bioherms. The carbonate deposition of the Guilmette Formation and equivalents was interrupted periodically by the deposition of quartz arenites. These may represent the breaking up of the miogeosynclinal-cratonic pattern of deposition. In most areas, the Guilmette and equivalents are overlain by a thin transgressive marine quartz arenite deposit--the Cove Fort Quartzite and basal Leatham equivalent. Previous paleontologic evidence indicated a general Middle to Late Devonian age for the Guilmette Formation. The present study narrows this range and suggests that the age of the Guilmette Formation and its equivalents is late Middle Devonian (Stringocephalus brachiopod zone) to early Late Devonian (Uppermost Palmatolepis gigas conodont zone). Available subsurface data suggest that the petroleum possibilities of the Guilmette Formation and equivalents in southwestern Utah are poor. Several tests have penetrated .the interval with only minor shows of oil in rocks with low porosity and permeability. Nevertheless, many outcrop samples of the same interval, appear to have excellent porosity and permeability and a strongly fetid odor,

Utah↗
USGS1977

Evaporation and radiation measurements at Salton Sea, California

Evaporation from the Salton Sea, Calif., was computed for a 539-day period between July 14, 1967, and January 2, 1969, by use of energy-budget, mass-transfer, and water budget methods. The total evaporation computed by the three methods agreed within 5 percent. The values of heat transfer to and from the bed were used in the energy-budget computations. Monthly evaporation computed by the energy-budget method for 1968 showed that the Salton Sea exhibited a double wave evaporation similar to that of oceans in the same latitude. Weekly and montly comparisons were made to determine if radiation measured by the flat-plate radiometer is seasonally biased. These comparisons indicate that the measurements of radiation by the flat-plate radiometer are not seasonally biased, and that the Cummings Radiation Integrator gives reliable measurements of radiation for periods as short as 1 week. An empirical mass-transfer coefficient, N, as determined from energy-budget measurements. The value of this coefficient to give evaporation in inches per day is 0.00245 when the windspeed is expressed in miles per hour and the vapor pressure expressed in millibars. (Woodard-USGS)

Open-File Report↗
USGS1978

Methodology of determining the uncertainty in the accessible geothermal resource base of identified hydrothermal convection systems

In order to quantify the uncertainty of estimates of the geothermal resource base in identified hydrothermal convection systems, a methodology is presented for combining estimates with uncertainties for temperature, area, and thickness of a geothermal reservoir into an estimate of the stored energy with uncertainty. Probability density functions for temperature, area, and thickness are assumed to be triangular in form. In order to calculate the probability distribution function for the stored energy in a single system or in many systems, a computer program for aggregating the input distribution functions using the Monte-Carlo method has been developed. To calculate the probability distribution of stored energy in a single system, an analytical expression is also obtained that is useful for calibrating the Monte Carlo approximation. For the probability distributions of stored energy in a single and in many systems, the central limit approximation is shown to give results ranging from good to poor.

Open-File Report↗
USGS1987

Evapotranspiration and microclimate at a low-level radioactive-waste disposal site in northwestern Illinois

From July 1982 through June 1984, a study was made of the microclimate and evapotranspiration at a low-level radioactive-waste disposal site near Sheffield, Bureau County, Illinois. Vegetation at the site consists of mixed pasture grasses, primarily brome (Bromus inermis) and red clover (Trifoleum pratense). Three methods were used to estimate evapotranspiration: (1) an energy-budget with the Bowen ratio, (2) an aerodynamic-profile, and (3) a soil-based water-budget. For the aerodynamic-profile method, sensible-heat flux was estimated by a profile equation and evapotranspiration was then calculated as the residual in the energy-balance equation. Estimates by the energy-budget and aerodynamic-profile methods were computed from hourly data, then summed by days and months. Yearly estimates for March through November, by these methods, were quite close--648 and 626 millimeters, respectively. Daily estimates range up to a maximum of about 6 millimeters. The water-budget method produced only monthly estimates based on weekly or biweekly soil-moisture content measurements. The yearly evapotranspiration estimated by this method (which actually included only the months of April through October) was 655 millimeters. The March-through-November average for the three methods of 657 millimeters was equivalent to 70 percent of precipitation. Continuous measurements were made of incoming and reflected shortwave radiation, incoming and emitted longwave radiation, net radiation, soil-heat flux, soil temperature, horizontal windspeed, and wet- and dry-bulb air temperature. Windspeed and air temperature were measured at heights of 0.5 and 2.0 meters (and also at 1.0 meter after September 1983). Soil-moisture content of the soil zone was measured with a gamma-attenuation gage. Annual precipitation (938 millimeters) and average temperature (10.8 degrees Celsius) were virtually identical to long-term averages from nearby National Weather Service stations. Solar radiation averaged 65 percent of that normally expected under clear skies. Net radiation averaged 70.1 watts per square meter and was highest in July and negative during some winter months. Wind direction varied but was predominately out of the south-southeast. Wind speed at the 2-meter height averaged 3.5 meters per second and was slightly higher in winter months than the rest of the year. The amount of water stored within the soil zone was greatest in early spring and least in late summer. Seasonal and diurnal trends in evapotranspiration rates mirrored those in net radiation; July was usually the month with the highest rate. The ratio of sensible- to latent-heat fluxes (commonly called the Bowen ratio) for the 2-year period was 0.38, as averaged from the three methods. Monthly Bowen ratios fluctuated somewhat but averaged about 0.35 for late spring through summer. In fall, the ratio declined to zero or to slightly negative values. When the ratio was negative, the latent-heat flux was slightly greater than the net radiation because of additional energy supplied by the cooling soil and air. Evapotranspiration calculated by the three methods averaged 75 percent of potential evapotranspiration, as estimated by the Penman equation. There was no apparent seasonal trend in the relation between actual and potential evapotranspiration rates.

Illinois↗
USGS1997

Coal fields and federal lands of the conterminous United States

The map depicts the relationship of coal and public lands in the conterminous U. S. Multiple GIS layers are being created for the purpose of deriving estimates of how much coal is owned and administered by the Federal government. Federal coal areas have a profound effect on land-management decisions. Regulatory agencies attempt to balance energy development with alternative land-use and environmental concerns. A GIS database of Federal lands used in energy resource assessments is being developed by the U. S. Geological Survey (USGS) in cooperation with the U.S. Bureau of Land Management (BLM) to integrate information on status of public land, and minerals owned by the Federal government with geologic information on coal resources, other spatial data, coal quality characteristics, and coal availability for development. Using national-scale data we estimate that approximately 60 percent of the area underlain by coal-bearing rocks in the conterminous United States are under Federal surface. Coal produced from Federal leases has tripled from about 12 percent of the total U.S. production in 1976 to almost 34 percent in 1995 (Energy Information Administration website ftp://ftp.eia.doe.gov/pub/coal/cia_95_tables/t13p01.txt). The reason for this increase is demand for low-sulfur coal for use in power plants and the fact that large reserves of this low-sulfur coal are in the western interior U.S., where the Federal government owns the rights to most of the coal reserves. The map was created using Arc/Info 7.0.3 on a UNIX system. The HPGL2 plot file for this map is available from the USGS Energy Resource Surveys Team from http://energy.cr.usgs.gov:8080/energy/coal.html.

Conterminous United States↗
USGS1979

Thermoluminescence dating of Hawaiian basalt

The thermoluminescence (TL) properties of plagioclase separates from 11 independently dated alkalic basalts 4,500 years to 3.3 million years old and 17 tholeiitic basalts 16 years to 450,000 years old from the Hawaiian Islands were investigated for the purpose of developing a TL dating method for young volcanic rocks. Ratios of natural to artificial TL intensity, when normalized for natural radiation dose rates, were used to quantify the thermoluminescence response of individual samples for age-determination purposes. The TL ratios for the alkalic basalt plagioclase were found to increase with age at a predictable exponential rate that permits the use of the equation for the best-fit line through a plot of the TL ratios relative to known age as a TL age equation. The equation is applicable to rocks ranging in composition from basaltic andesite to trachyte over the age range from about 2,000 to at least 250,000 years before present (B.P.). The TL ages for samples older than 50,000 years have a calculated precision of less than :t 10 percent and a potential estimated accuracy relative to potassium-argon ages of approximately :t 10 percent. An attempt to develop a similar dating curve for the tholeiitic basalts was not as successful, primarily because the dose rates are on the average lower than those for the alkalic basalts by a factor of 6, resulting in lower TL intensities in the tholeiitic basalts for samples of equivalent age, and also because the age distribution of dated material is inadequate. The basic TL properties of the plagioclase from the two rock types are similar, however, and TL dating of tholeiitic basalts should eventually be feasible over the age range 10,000 to at least 200,000 years B.P. The average composition of the plagioclase separates from the alkalic basalts ranges from oligoclase to andesine; compositional variations within this range have no apparent effect on the TL ratios. The average composition of the plagioclase from the tholeiitic basalts is labradorite. The natural radiogenic dose rates for the alkalic basalts calculated on the basis of assumed secular equilibrium range from 0.228 to 0.462 rad per year and average 0.335 rad per year exclusive of the cosmic-ray energy dose and with the alpha-particle component equal to one-tenth of the total alpha decay energy. The TL measurements were made using material of a 37 to 44-micrometer size range; the crushing required during sample preparation was found to have a negligible effect on natural TL. Both natural and artificial TL were filtered to the bandwidth 3,500 A to 5,000 A to restrict the light detected to that from the plagioclase emission peak centered at about 4,500 A and associated with structural defects. Within this bandwidth, the natural TL from both the alkalic and tholeiitic basalt plagioclase consists of a single peak with a maximum amplitude at about 350?C; the artificial TL glow curves produced by an exposure of the drained samples to a standard dose of X-radiation consist of four broad, variably overlapping peaks with maxima at about 110?C, 150?C, 225?C, and 300?C. The maximum amplitude of the 350?C natural and 300?C artificial TL peaks, both produced by the same general activation energy distribution of trapping centers, were used for TL dating. The high-temperature artificial TL peak occurs at a lower temperature than the corresponding natural TL peak owing to the presence of a large number of electrons retained in traps near the lower end of the trap-depth energy range in samples whose TL is measured a short time after intense artificial irradiation. These traps remain essentially empty in the natural environment owing to spontaneous decay and do not produce measurable low-temperature natural TL peaks. With prolonged storage after irradiation, the 300?C artificial TL peak migrates to higher temperatures and decreases in amplitude.

Professional Paper↗
USGS2002

Cyclic injection, storage, and withdrawal of heated water in a sandstone aquifer at St. Paul, Minnesota--Analysis of thermal data and nonisothermal modeling of short-term test cycles

In May 1980, the University of Minnesota began a project to evaluate the feasibility of storing heated water (150 degrees Celsius) in the Franconia-Ironton Galesville aquifer (183 to 245 meters below land surface) and later recovering it for space heating. The University's steam-generation facilities supplied high-temperature water for injection. The Aquifer Thermal-Energy Storage system is a doublet-well design in which the injection-withdrawal wells are spaced approximately 250 meters apart. Water was pumped from one of the wells through a heat exchanger, where heat was added or removed. This water was then injected back into the aquifer through the other well. Four short-term test cycles were completed. Each cycle consisted of approximately equal durations of injection and withdrawal ranging from 5.25 to 8.01 days. Equal rates of injection and withdrawal, ranging from 17.4 to 18.6 liters per second, were maintained for each short-term test cycle. Average injection temperatures ranged from 88.5 to 117.9 degrees Celsius. Temperature graphs for selected depths at individual observation wells indicate that the Ironton and Galesville Sandstones received and stored more thermal energy than the upper part of the Franconia Formation. Clogging of the Ironton Sandstone was possibly due to precipitation of calcium carbonate or movement of fine-grain material or both. Vertical-profile plots indicate that the effects of buoyancy flow were small within the aquifer. A three-dimensional, anisotropic, nonisothermal, ground-water-flow, and thermal-energy-transport model was constructed to simulate the four short-term test cycles. The model was used to simulate the entire short-term testing period of approximately 400 days. The only model properties varied during model calibration were longitudinal and transverse thermal dispersivities, which, for final calibration, were simulated as 3.3 and 0.33 meters, respectively. The model was calibrated by comparing model-computed results to (1) measured temperatures at selected altitudes in four observation wells, (2) measured temperatures at the production well, and (3) calculated thermal efficiencies of the aquifer. Model-computed withdrawal-water temperatures were within an average of about 3 percent of measured values and model-computed aquifer-thermal efficiencies were within an average of about 5 percent of calculated values for the short-term test cycles. These data indicate that the model accurately simulated thermal-energy storage within the Franconia-Ironton-Galesville aquifer.

Professional Paper↗
USGS2000

Mineral resource potential and geology of the Routt National Forest and the Middle Park Ranger District of the Arapaho National Forest, Colorado, with a section on salable minerals

The assessment of the mineral resource potential of the Routt National Forest and the Middle Park Ranger District of the Arapaho National Forest, Colorado, was conducted so that the mineral resources of the forest can be considered along with other resources in land use planning. This report discusses the potential for as yet undiscovered mineral and energy resources within the forest. Mineral resource information is given in terms of mineral deposit types and their geologic settings, and mineral deposit types are defined by geologic characteristics of known deposits that may occur within or near the forest. All available information regarding mineral deposits or occurrences and energy resources, as of June 1994, was assembled to assess the mineral and energy potential. Geologic maps were compiled and mineral and energy potential maps were also created for deposit types within the forest.

Colorado↗
USGS2013

Evapotranspiration from marsh and open-water sites at Upper Klamath Lake, Oregon, 2008--2010

Water allocation in the Upper Klamath Basin has become difficult in recent years due to the increase in occurrence of drought coupled with continued high water demand. Upper Klamath Lake is a central component of water distribution, supplying water downstream to the Klamath River, supplying water for irrigation diversions, and providing habitat for various species within the lake and surrounding wetlands. Evapotranspiration (ET) is a major component of the hydrologic budget of the lake and wetlands, and yet estimates of ET have been elusive—quantified only as part of a lumped term including other substantial water-budget components. To improve understanding of ET losses from the lake and wetlands, measurements of ET were made from May 2008 through September 2010. The eddy-covariance method was used to monitor ET at two wetland sites continuously during this study period and the Bowen-ratio energy-balance method was used to monitor open-water lake evaporation at two sites during the warmer months of the 3 study years. Vegetation at one wetland site (the bulrush site) consists of a virtual monoculture of hardstem bulrush (formerly Scirpus acutus, now Schoenoplectus acutus), and at the other site (the mixed site) consists of a mix of about 70 percent bulrush, 15 percent cattail (Typha latifolia), and 15 percent wocus (Nuphar polysepalum). Measured ET at these two sites was very similar (means were ±2.5 percent) and mean wetland ET is computed as a 70 to 30 percent weighted average of the bulrush and mixed sites, respectively, based on community-type distribution estimated from satellite imagery. Biweekly means of wetland ET typically vary from maximum values of around 6 to 7 millimeters per day during midsummer, to minimum values of less than 1 mm/d during midwinter. This strong annual signal primarily reflects life-cycle changes in the wetland vegetation, and the annual variation of radiative input to the surface and resulting temperature. The perennial vegetation begins each growing season submerged, emerges from the dead litter mat around late May or early June, reaches a maximum height of about 2.2 meters (m) during summer, senesces in October, and subsequently lodges over, contributing to the dead litter mat from previous years. Hydroperiods last about 5 to 6 months, typically beginning in January or February and ending in July or August, and have a minor influence on the annual ET cycle. These hydroperiods result from lake levels that typically vary about 1.3 m, from around 0.6 to 0.9 m above the wetland surface, to around 0.4 to 0.7 m below the wetland surface. An estimate of 3-year annual wetland ET, made by substituting early- and late-season data measured during 2009 for the missing periods in early 2008 and late 2010, is 0.938 meter per year (m/yr). Daily values of alfalfa-based reference ET (ET r ) were retrieved from the Bureau of Reclamation AgriMet Web site (http://www.usbr.gov/pn/agrimet/index.html) and are aggregated into biweekly, annual, and 3-year values (for consistency, the 3-year values are also computed using substitute data from 2009 for early 2008 and late 2010). These ET r values are computed from weather data measured at the nearby Agency Lake weather station (AGKO), and are based on the assumption that the alfalfa crop is green and vigorous year-round. The 3-year value of ET r is 1.145 m/yr, about 22 percent greater than wetland ET. A comparison of 2008–2010 alfalfa and pasture growing season actual ET with wetland ET is made using data from the more distant Klamath Falls AgriMet weather station (KFLO) because actual alfalfa and pasture ET are not computed for the AGKO site. During the 190-day average alfalfa growing season, wetland ET (0.779 m) is about 7 percent less than alfalfa ET (0.838 m). During the 195-day average pasture growing season, wetland ET (0.789 m) is about 18 percent greater than pasture ET (0.671 m). Assuming alfalfa and pasture ET are equal to wetland ET during the non-growing season, annual estimates become 0.997 m, 0.938 m, and 0.820 m from alfalfa, wetland, and pasture, respectively. Wetland crop coefficients (K c =ET/ET r ) are computed at daily, biweekly, and annual time steps. Approximate formulas are given to estimate daily values of growing season Kc, thereby allowing computation of daily growing season ET using ET r from the AGKO weather station. Biweekly values of growing season Kc are computed from ensemble average values of ET and ET r during the 3 study period growing seasons, and a single, mean Kc is computed for the non-growing season. Together, these provide relatively accurate estimates of biweekly ET during the study (RMSE=0.396 and 0.347 mm/d, r2 = 62 and 0.971 at the bulrush and mixed sites, respectively). A fourth-order polynomial fit of the biweekly growing season values to day of year provides a more automated form of ET computation. Measured ET at the bulrush wetland site during the current study compares very closely with growing-season ET estimated during a study in 1997 at nearly the same location. During the earlier study, ET was measured four times, using eddy covariance for 1- to 2-day periods, and was estimated between measurement periods using a Penman-Monteith model, calibrated to the measurements. Differences between time series of ET from the two studies are similar to interannual differences within the current study. Compared to the 1997 study, the current study measured larger ET rates in early summer and smaller rates in late summer, resulting in very similar growing-season totals. A study conducted in 2000 estimated ET from nearby fallowed cropland, using the Bowen-ratio energy balance method supplemented with Priestley-Taylor and crop-coefficient ET modeling. Seasonal timing of ET from three different crop types varied considerably, but growing-season totals were remarkably similar, at 0.435 ± 0.009 m. Wetland ET measured during the current study, evaluated over the same growing season was 0.718 m, or about 65 percent greater than the fallowed cropland ET. Open-water evaporation from Upper Klamath Lake was measured at two locations during the warmer months of 2008–2010 using the Bowen-ratio energy balance method. Measured rates were in general agreement with those measured in 2003 using the same method. Open-water evaporation and wetland ET were nearly equal during late June through early August, when wetland vegetation was green and abundant. As expected, open-water evaporation consistently exceeded wetland ET during late summer, as wetland ET responded to vegetation senescence while open water evaporation responded to extra available energy in the form of heat previously stored in the lake. Overall, open-water evaporation was 20 percent greater than wetland ET during the same period.

Oregon↗
USGS2017

Bathymetric surveys of the Neosho River, Spring River, and Elk River, northeastern Oklahoma and southwestern Missouri, 2016–17

In February 2017, the Grand River Dam Authority filed to relicense the Pensacola Hydroelectric Project with the Federal Energy Regulatory Commission. The predominant feature of the Pensacola Hydroelectric Project is Pensacola Dam, which impounds Grand Lake O’ the Cherokees (locally called Grand Lake) in northeastern Oklahoma. Identification of information gaps and assessment of project effects on stakeholders are central aspects of the Federal Energy Regulatory Commission relicensing process. Some upstream stakeholders have expressed concerns about the dynamics of sedimentation and flood flows in the transition zone between major rivers and Grand Lake O’ the Cherokees. To relicense the Pensacola Hydroelectric Project with the Federal Energy Regulatory Commission, the hydraulic models for these rivers require high-resolution bathymetric data along the river channels. In support of the Federal Energy Regulatory Commission relicensing process, the U.S. Geological Survey, in cooperation with the Grand River Dam Authority, performed bathymetric surveys of (1) the Neosho River from the Oklahoma border to the U.S. Highway 60 bridge at Twin Bridges State Park, (2) the Spring River from the Oklahoma border to the U.S. Highway 60 bridge at Twin Bridges State Park, and (3) the Elk River from Noel, Missouri, to the Oklahoma State Highway 10 bridge near Grove, Oklahoma. The Neosho River and Spring River bathymetric surveys were performed from October 26 to December 14, 2016; the Elk River bathymetric survey was performed from February 27 to March 21, 2017. Only areas inundated during those periods were surveyed. The bathymetric surveys covered a total distance of about 76 river miles and a total area of about 5 square miles. Greater than 1.4 million bathymetric-survey data points were used in the computation and interpolation of bathymetric-survey digital elevation models and derived contours at 1-foot (ft) intervals. The minimum bathymetric-survey elevation of the Neosho River was 709.18 ft above North American Vertical Datum of 1988, which corresponds to a maximum depth of 34.22 ft. The minimum bathymetric-survey elevation of the Spring River was 714.18 ft above North American Vertical Datum of 1988, which corresponds to a maximum depth of 29.22 ft. The minimum bathymetric-survey elevation of the Elk River was 715.62 ft above North American Vertical Datum of 1988, which corresponds to a maximum depth of 27.78 ft.

Missouri, Oklahoma↗
USGS2018

Conceptual model to assess water use associated with the life cycle of unconventional oil and gas development

As the demand for energy increases in the United States, so does the demand for water used to produce many forms of that energy. Technological advances, limited access to conventional oil and gas accumulations, and the rise of oil and gas prices resulted in increased development of unconventional oil and gas (UOG) accumulations. Unconventional oil and gas is developed using a method that combines directional drilling and hydraulic fracturing techniques, allowing for greater oil and gas production from previously unrecoverable reservoirs. Quantification of the water resources required for UOG development and production is difficult because of disparate data sources, variable reporting requirements across boundaries (local, State, and national), and incomplete or proprietary datasets. A topical study was started in 2015 under the U.S. Geological Survey’s Water Availability and Use Science Program, as part of the directive in the Secure Water Act for the U.S. Geological Survey to conduct a National Water Census, to better understand the relation between production of UOG resources for energy and the amount of water needed to produce and sustain this type of energy development in the United States. The Water Availability and Use Science Program goal for this topical study is to develop and apply a statistical model to better estimate the water use associated with UOG development, regardless of the location and target geologic formation. As a first step, a conceptual model has been developed to characterize the life cycle of water use in areas of UOG development. Categories of water use and the way water-use data are collected might change over time; therefore, a generic approach was used in developing the conceptual model to allow for greater flexibility in adapting to future changes or newly available data. UOG development can be summarized into four stages: predrilling construction, drilling, hydraulic fracturing, and ongoing production. The water used in UOG production can be categorized further as direct, indirect, or ancillary water use. Direct water use is defined as the water used for drilling and hydraulic fracturing a well and for maintaining the well during ongoing production. Indirect water use is defined as the water used at or near a well pad. The water used for dust abatement also is considered an indirect use but may be applied away from the well pad. Ancillary water use is defined as the additional local or regional water use resulting from a change (for example, population) directly related to UOG development throughout the life cycle that is not used directly in the well or indirectly for any other purpose at the well pad. The conceptual model presented in this report consists of five elements: (1) input data, (2) processes, (3) decisions, (4) output data, and (5) outcomes. The input data requirements for estimating water use associated with UOG development are somewhat onerous, and obtaining suitable datasets can be challenging because local, State, and Federal agencies do not collect data similarly. The quality of a water-use assessment that uses the conceptual model presented in this report is dependent on the quality and quantity of data that are available for a UOG play. The conceptual model can be used for an assessment with sparse data; however, having sparse data likely will result in greater uncertainty in the water-use estimates. The conceptual model presented in this report is designed to be robust to characterize and simulate the data processing to estimate water use associated with UOG development. Although the results of an analysis that includes missing data have greater uncertainty, the analysis still can be insightful because it can establish a baseline estimate of UOG water use that may be refined further as more data become available. Analysis of models that include missing data also could aid in identifying the data most needed for future water-use estimates. Characterizing individual model limitations is important because the conceptual model can be used in future water-use studies to facilitate data compiling, data processing, estimating, and assessing UOG activities regardless of location.

Scientific Investigations Report↗
USGS1955

Geologic investigations of radioactive deposits, semiannual progress report for June 1 to November 30, 1955

This report is a statement of progress during the six-months period from June 1 to November 30, 1955 on investigations of radioactive materials in the United States and Alaska, undertaken by the U.S. Geological Survey under the sponsorship of the U.S. Atomic Energy Commission. During the period the Geological Survey's program has been directed to an increasing extent toward the understanding of geologic conditions favorable for the concentration of uranium, rather than the search for minable deposits as such. This shift in emphasis is reflected in the decreased amount of exploration drilling during the period, and the accompanying increase in geologic programs of a long-range nature. The program is now directed toward a comprehensive understanding of the many factors involved in uranium geology, and the publication of reports that will make available information on all phases of the uranium program. Many investigations have progressed to the point where final reports are in preparation for future publication with the permission of the Atomic Energy Commission; for other investigations of a continuing nature it will be several years before final reports can be prepared. Formal publications (as distinguished from administrative Trace Elements Reports) published during the period include 10 Geological Survey Bulletins or Bulletin Chapters; 116 Geological Survey maps; 15 reports published in scientific journals; seven Trace Elements Reports sent to the Technical Information Service of the Atomic Energy Commission for distribution and sale to the public; and four Trace Elements reports placed on open file. In addition, a large number •of papers by geologists in the program were presented before scientific societies, and the 61 papers prepared for the United Nations International Conference .on the Peaceful Uses of Atomic Energy during the preceding report period were published by the United Nations.

Trace Elements Investigations↗
USGS2002

A three-dimensional numerical model of predevelopment conditions in the Death Valley regional ground-water flow system, Nevada and California

In the early 1990's, two numerical models of the Death Valley regional ground-water flow system were developed by the U.S. Department of Energy. In general, the two models were based on the same basic hydrogeologic data set. In 1998, the U.S. Department of Energy requested that the U.S. Geological Survey develop and maintain a ground-water flow model of the Death Valley region in support of U.S. Department of Energy programs at the Nevada Test Site. The purpose of developing this 'second-generation' regional model was to enhance the knowledge an understanding of the ground-water flow system as new information and tools are developed. The U.S. Geological Survey also was encouraged by the U.S. Department of Energy to cooperate to the fullest extent with other Federal, State, and local entities in the region to take advantage of the benefits of their knowledge and expertise. The short-term objective of the Death Valley regional ground-water flow system project was to develop a steady-state representation of the predevelopment conditions of the ground-water flow system utilizing the two geologic interpretations used to develop the previous numerical models. The long-term objective of this project was to construct and calibrate a transient model that simulates the ground-water conditions of the study area over the historical record that utilizes a newly interpreted hydrogeologic conceptual model. This report describes the result of the predevelopment steady-state model construction and calibration. The Death Valley regional ground-water flow system is situated within the southern Great Basin, a subprovince of the Basin and Range physiographic province, bounded by latitudes 35 degrees north and 38 degrees 15 minutes north and by longitudes 115 and 118 degrees west. Hydrology in the region is a result of both the arid climatic conditions and the complex geology. Ground-water flow generally can be described as dominated by interbasinal flow and may be conceptualized as having two main components: a series of relatively shallow and localized flow paths that are superimposed on deeper regional flow paths. A significant component of the regional ground-water flow is through a thick Paleozoic carbonate rock sequence. Throughout the flow system, ground water flows through zones of high transmissivity that have resulted from regional faulting and fracturing. The conceptual model of the Death Valley regional ground-water flow system used for this study is adapted from the two previous ground-water modeling studies. The three-dimensional digital hydrogeologic framework model developed for the region also contains elements of both of the hydrogeologic framework models used in the previous investigations. As dictated by project scope, very little reinterpretation and refinement were made where these two framework models disagree; therefore, limitations in the hydrogeologic representation of the flow system exist. Despite limitations, the framework model provides the best representation to date of the hydrogeologic units and structures that control regional ground-water flow and serves as an important information source used to construct and calibrate the predevelopment, steady-state flow model. In addition to the hydrogeologic framework, a complex array of mechanisms accounts for flow into, through, and out of the regional ground-water flow system. Natural discharges from the regional ground-water flow system occur by evapotranspiration, springs, and subsurface outflow. In this study, evapotranspiration rates were adapted from a related investigation that developed maps of evapotranspiration areas and computed rates from micrometeorological data collected within the local area over a multiyear period. In some cases, historical spring flow records were used to derive ground-water discharge rates for isolated regional springs. For this investigation, a process-based, numerical model was developed to estimat

Water-Resources Investigations Report↗
USGS2004

Relations between total-sediment load and peak discharge for rainstorm runoff on five ephemeral streams in Wyoming

Total-sediment loads transported by ephemeral flows are a function of rainstorm energy and peak discharge. Rainstorm energy, estimated by rainfall intensity, is the primary mechanism for soil-particle detachment. Vegetation, soil cohesiveness, and land slope also are related to the amount of sediment detached, but these factors remain nearly constant, except for seasonal or human-induced changes in vegetation. Thus, the largest variability in total-sediment loads is the result of variability in rainstorm energy. The magnitude of the peak discharge in a stream from a runoff-producing rainstorm is a function of the intensity and volume of rainfall. The greater the rainfall intensity for the same volume of rainfall, the larger the peak discharge. Therefore, for each drainage area a relation exists between the total-sediment load for a rainstorm and the peak discharge for the rainstorm, because both are a function of rainstorm energy. Total-sediment loads for runoff-producing rainstorms were computed from sample data collected at five ephemeral streams in semiarid areas of Wyoming. Regression analyses were used to develop equations relating total-sediment load to the peak discharge. Coefficients of determination ranged from 89 to 97 percent. Average standard errors ranged from 35 to 94 percent. The slopes of the lines defined by the equations were not different at the 95-percent level of significance, but the intercepts were significantly different for the five streams.

Water-Resources Investigations Report↗
USGS1985

Selected papers in the hydrologic sciences, 1985; May 1985

The University of Minnesota, the Minnesota Geological Survey, and the U.S. Geological Survey are studying the feasibility of storing water at a temperature of 150 degrees Celsius in the Franconia-Ironton-Galesville aquifer. The Aquifer Thermal-Energy Storage project has a doublet-well design with a well spacing of approximately 250 meters. One well will be used for cool-water supply, and, the other, for hot-water injection. The U.S. Geological Survey is constructing a model of ground-water flow and thermal-energy transport to aid in determining the efficiency of the Aquifer Thermal Energy Storage system. A preliminary model of radial flow and thermal-energy transport was constructed, based on hydraulic and thermal properties of the Franconia-Ironton-Galesville aquifer determined in previous studies. The model was used to investigate the sensitivity of model results to various hydraulic and thermal properties and to study the potential for buoyancy flow within the aquifer and the effect of various cyclic injection-withdrawal schemes on the relative thermal efficiency of the aquifer. Sensitivity analysis was performed assuming 8 days of injection of 150-degree-Celsius water at 18.9 liters per second, 8 days of storage, and 8 days of withdrawal of hot water at 18.9 liters per second. The analysis indicates that, for practical ranges of hydraulic and thermal properties, rock-heat capacity is the least important property and thermal dispersivity is the most important property used to compute temperature and aquifer thermal efficiency. The amount of buoyancy flow was examined for several values of hydraulic conductivity and ratios of horizontal to vertical hydraulic conductivities. For the assumed base values of hydraulic and thermal properties, buoyancy flow was negligible. The greatest simulated buoyancy flow resulted from simulations in which horizontal hydraulic conductivity was increased to 10 times the base value, and the vertical hydraulic conductivity was set equal to the horizontal hydraulic conductivity. The effects of various injection-withdrawal rates and durations on computed values of aquifer relative thermal efficiency and final well-bore temperature were studied for five 1-year hypothetical test cycles of injection and withdrawal. The least efficient scheme was 8 months injection of 150-degree-Celsius water and 4 months of withdrawal of hot water at 18.9 liters per second. The most efficient scheme was obtained with 6 months of injection of 150-degree-Celsius water at 18.9 liters per second and 6 months of withdrawal of hot water at 37.8 liters per second. The hypothetical simulations indicate that the subsequent calibrated model of the doublet-well system will be a valuable tool in determining the most efficient system operation.

Water Supply Paper↗