USGS Science⌕ Search

SEARCH · USGS Science

Results for “Surveys in Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 955 records · Page 53Linked to original sources
USGSDate not supplied

Integrated geophysical characterization of the Winthrop Landfill Southern Flow Path, Winthrop, Maine

The U.S. Geological Survey (USGS), in cooperation with United Technologies Corporation, used an integrated suite of borehole, surface, and water-borne geophysical methods near the site of the former Winthrop Landfill, Winthrop, Maine, to investigate the hydrogeology controlling the transport of leachate from the landfill to nearby Annabessacook Lake. During the fall of 2000 and summer of 2001, the USGS conducted borehole electromagnetic (EM) induction and gamma logging, and inductive terrain-conductivity, two-dimensional (2D) resistivity, continuous seismic reflection, and magnetic surveys. The objectives of this integrated geophysical study were to provide constraints on the location and extent of the southern flow path(s) of contamination from the landfill to the lake; identify shoreline seep geophysical signatures; identify potentially hidden seeps in the lake; and determine depth to bedrock below Annabessacook Lake in the study area. Interpretation of surface 2D resistivity, magnetic, and inductive terrain-conductivity data and borehole EM logs delineates an electrically conductive anomaly consistent with a leachate plume moving from the current landfill boundary southward through the overburden to the shores of Annabessacook Lake. Surface and borehole geophysical data collected south and southeast of the landfill indicate the presence of discrete, shallow conductive anomalies at the southeastern edge of the landfill and near the lakeshore. The conductive anomalies appear at increasing depths closer to the lake. Magnetic anomalies offshore confirm the presence of iron-rich landfill leachate discharging into the lake south of the landfill. High-resolution swept-frequency seismic data used to map sediment and grain size distribution in the lake sub-bottom along the shoreline identified sediment-infilled bedrock lows that may act as conduits for contaminant migration.

Maine↗
USGS2012

The problem of groundwater discharge into the seas

Introductory Note: The dynamic equilibrium of the various factors involved in the world water balance or budget is the central scientific problem of the International Hydrological Decade. One of the potentially vital elements of the balance is groundwater discharge to the oceans. To paraphrase the authors of the following Russian publication, the world water budget can't be properly balanced, statically or dynamically, until there are improved values for the amount of groundwater that is discharged directly to oceans, seas, and enclosed lakes. The following report, with its bibliography, presents some Russian approaches to the problem and provides a few bits of numerical information. The report was translated by Frank W. Trainer of the U.S. Geological Survey. The text has been slightly reduced in the interests of saving space but the bibliography is given in full and has been transcribed into more or less standard U.S. Geological Survey bibliographical style. ©1971. American Geophysical Union. All Rights Reserved.

Eos, Transactions, American Geophysical Union↗
USGS2000

Mount St. Helens - From the 1980 eruption to 2000

Mount St. Helens, Washington, is the most active volcano in the Cascade Range. Its most recent series of eruptions began in 1980 when a large landslide and powerful explosive eruption created a large crater, and ended 6 years later after more than a dozen extrusions of lava built a dome in the crater. Larger, longer lasting eruptions have occurred in the volcano's past and are likely to occur in the future. Although the volcano seems to have returned to a period of quiet, scientists with the U.S. Geological Survey and University of Washington Geophysics Program continue to closely monitor Mount St. Helens for signs of renewed activity.

Washington↗
USGS2000

Borehole-radar methods: Tools for characterization of fractured rock

Locating and characterizing bedrock fractures and lithologic changes is an important component of studies of ground water supply and contamination in fractured-rock aquifers. Borehole-radar reflection methods provide information on the location, orientation, and lateral extent of fracture zones that intersect the borehole, and can identify fractures in the rock surrounding the borehole that are not penetrated by drilling. Crosshole radar logging provides crosssectional maps of the electromagnetic properties of bedrock between boreholes that can identify fracture zones and lithologic changes and can also be used to monitor tracer tests. Borehole-radar logs can be integrated with results of surfacegeophysical surveys and other borehole-geophysical logs, such as acoustic or optical televiewer and flowmeter, to distinguish transmissive fractures from lithologic variations or closed fractures. Integrated interpretation procedures provide results that can be used to develop conceptual and numerical models, design monitoring and sampling programs, and monitor implementation of contamination remediation measures, such as blast-fracturing.

Fact Sheet↗
USGS2011

Bibliography of literature pertaining to Long Valley Caldera and associated volcanic fields

On May 25-27, 1980, Long Valley caldera was rocked by four M=6 earthquakes that heralded the onset of a wave of seismic activity within the caldera which has continued through the present. Unrest has taken the form of seismic swarms, uplift of the resurgent dome, and areas of vegetation killed by increased CO2 emissions, all interpreted as resulting from magma injection into different levels beneath the caldera, as well as beneath Mammoth Mountain along the southwest rim of the caldera. Continuing economic development in the Mammoth Lakes area has swelled the local population, increasing the risk to people and property if an eruption were to occur. The U.S. Geological Survey (USGS) has been monitoring geophysical activity in the Long Valley area since the mid-1970s and continues to track the unrest in real time with a sophisticated network of geophysical sensors. Hazards information obtained by this monitoring is provided to local, State, and Federal officials and to the public through the Long Valley Observatory. The Long Valley area also was scientifically important before the onset of current unrest. Lying at the eastern foot of the Sierra Nevada, the deposits from this active volcanic system have provided fertile ground for research into Neogene tectonics, Quaternary geology and geomorphology, regional stratigraphy, and volcanology. In the early 1970s, intensive studies of the area began through the USGS Geothermal Investigations Program, owing to the presence of a large young silicic volcanic system. The paroxysmal eruption of Long Valley caldera about 760,000 years ago produced the Bishop Tuff and associated Bishop ash. The Bishop Tuff is a well-preserved ignimbrite deposit that has continued to provide new and developing insights into the dynamics of ignimbrite-forming eruptions. Another extremely important aspect of the Bishop Tuff is that it is the oldest known normally magnetized unit of the Brunhes Chron. Thus, the age of the Bishop Tuff is used to define the beginning of the Brunhes Chron and helps constrain the Brunhes-Matuyama boundary. The Bishop ash, which was dispersed as far east as Nebraska, Kansas, and Texas, provides an important tephrostratigraphic marker throughout the Western United States. The obsidian domes of both the Mono and Inyo Craters, which were produced by rhyolitic eruptions in the past 40,000 years, have been well studied, including extensive scientific drilling through the domes. Exploratory drilling to 3-km depth on the resurgent dome and subsequent instrumentation of the Long Valley Exploratory Well (LVEW) have led to a number of important new insights. Scientific drilling also has been done within the Casa Diablo geothermal field, which, aside from drilling, has been commercially developed and is currently feeding 40 MW of power into the Southern California Edison grid. Studies in all the above-mentioned volcanic fields have contributed to the extensive scientific literature published on the Long Valley region. Although most of this scientific literature has been published since 1970, a significant amount of historical literature extends backward to the late 1800s. The purpose of this bibliography is to compile references pertaining to the Long Valley region from all time periods and all Earth science fields into a single listing, thus providing an easily accessible guide to the published literature for current and future researchers.

Open-File Report↗
USGS1960

Gravity survey in part of the Snake River Plain, Idaho — A preliminary report

During the early summer of 1959, a total of 1,187 gravity stations were occupied on the western part of the Snake River plain in Idaho. An area of 2,000 square miles extending from Glenns Ferry, Idaho, to Caldwell, Idaho, was covered with a station density of one station per two square miles. An additional 1,200 square miles of surrounding area, mainly from Caldwell, Idaho, to the Oregon-Idaho state line, was covered with a density of one station per seven square miles. The mean reproducibility of the observed gravities of these stations was 0.05 milligal, with a maximum discrepancy of 0.2 milligal. Gravity data were reduced to simple Bouguer values using a combined free-air and Bouguer correction of 0.06 milligal per foot. The only anomalies found with closure in excess of 10 milligals are two elongated highs, orientated northwest-southeast, with the northwestern high offset to the northeast by 10 miles. The smaller of these highs extends from Meridian, Idaho, to Nyssa, Oregon, and the larger extends from Swan Falls, Idaho, to Glenns Ferry, Idaho. The maximum value recorded is a simple Bouguer value of -66.5 milligals with respect to the International Ellipsoid. Gradients on the sides of these highs are largest on the northeast sides, reaching six milligals per mile in places. Graticule interpretations of a profile across the southeastern high using a density contrast of 0.3 gm per cubic centimeter indicate an accumulation of lava reaching a thickness of at least 28,000 feet. The Snake River investigation was made for the purpose of searching out, defining, and interpreting gravity anomalies present on the western part of the Snake River lava plain in Idaho. In particular, it was desired to further define gradients associated with the gravity high shown by the regional work of Bonini and Lavin (1957). It was not planned to cover any specific area, but rather to let the observed anomalies determine the course of the field work. The study was undertaken as part of a project on Volcanism and Crustal Deformation, supervised by L. C. Pakiser of the U.S. Geological Survey. Professor Rodgers of the Geophysics Department of the Colorado School of Mines acted as an advisor.

Idaho↗
USGS1977

A multi-channel digital telemetry system for low frequency geophysical data

An inexpensive general purpose digital telemetry system for collection of low frequency geophysical data from U.S. Geological Survey instruments (eg. tilt, strain, gravity, creep, water level, radon, magnetic field, resistivity, telluric current, temperature, etc.) has been designed and built. This system provides data for a more general interactive data acquisition, retrieval and analysis system. The field stations are self-contained, battery operated and housed in weather proof containers. Each accepts up to 15 analog data inputs in the range of -5 to +5 volts. The dynamic range is 70db. The units transmit information as FSK (Frequency Shift Keyed) tones onto either a phone line or radio link with up to 150 transmitters sharing one line. The average power consumption is 0.06 nR watts where n is the 1 number of input channels transmitted and R is the sample rate in minutes -1 . The central receiver-recorder unit accepts and decodes the FSK tones and converts, formats and records the digital data together with time information and station identification on IBM combatible magnetic tape. The digital data are also converted and recorded in analog form for visual monitoring.

Open-File Report↗
USGS2013

Hydrogeology and water quality of the Dublin and Midville aquifer systems at Waynesboro, Burke County, Georgia, 2011

The hydrogeology and water quality of the Dublin and Midville aquifer systems were characterized in the City of Waynesboro area in Burke County, Georgia, based on geophysical and drillers’ logs, flowmeter surveys, a 24-houraquifer test, and the collection and chemical analysis of water samples in a newly constructed well. At the test site, the Dublin aquifer system consists of interlayered sands and clays between depths of 396 and 691 feet, and the Midville aquifer system consists of a sandy clay layer overlying a sand and gravel layer between depths of 728 and 936 feet. The new well was constructed with three screened intervals in the Dublin aquifer system and four screened intervals in the Midville aquifer system. Wellbore-flowmeter testing at a pumping rate of 1,000 gallons per minute indicated that 52.2 percent of the total flow was from the shallower Dublin aquifer system with the remaining 47.8 percent from the deeper Midville aquifer system. The lower part of the lower Midville aquifer (900 to 930 feet deep), contributed only 0.1 percent of the total flow. Hydraulic properties of the two aquifer systems were estimated using data from two wellbore-flowmeter surveys and a 24-hour aquifer test. Estimated values of transmissivity for the Dublin and Midville aquifer systems were 2,000 and 1,000 feet squared per day, respectively. The upper and lower Dublin aquifers have a combined thickness of about 150 feet and the horizontal hydraulic conductivity of the Dublin aquifer system averages 10 feet per day. The upper Midville aquifer, lower Midville confining unit, and lower Midville aquifer have a combined thickness of about 210 feet, and the horizontal hydraulic conductivity of the Midville aquifer system averages 6 feet per day. Storage coefficient of the Dublin aquifer system, computed using the Theis method on water-level data from one observation well, was estimated to be 0.0003. With a thickness of about 150 feet, the specific storage of the Dublin aquifer system averages about 2×10-6 per foot. Water quality of the Dublin and Midville aquifer systems was characterized during the aquifer test on the basis of water samples collected from composite well flow originating from five depths in the completed production well during the aquifer test. Samples were analyzed for total dissolved solids, specific conductance, pH, alkalinity, and major ions. Water-quality results from composite samples, known flow contribution from individual screens, and a mixing equation were used to calculate water-quality values for sample intervals between sample depths or below the bottom sample depth. With the exception of iron and manganese, constituent concentrations of water from each of the sampled intervals and total flow from the well were within U.S. Environmental Protection Agency primary and secondary drinking-water standards. Water from the bottommost sample interval in the lower part of the lower Midville aquifer (900 to 930 feet) contained manganese and iron concentrations of 59.1 and 1,160 micrograms per liter, respectively, which exceeded secondary drinking-water standards. Because this interval contributed only 0.1 percent of the total flow to the well, water quality of this interval had little effect on the composite well water quality. Two other sample intervals from the Midville aquifer system and the total flow from both aquifer systems contained iron concentrations that slightly exceeded the secondary drinking-water standard of 300 micrograms per liter.

Georgia↗
USGS2024

Editorial: From cold seeps to hydrothermal vents: Geology, chemistry, microbiology, and ecology in marine and coastal environments

This Research Topic compiles contemporary studies on cold seeps, hydrothermal vents, mud volcanoes, and related seafloor features that are associated with focused fluid emissions and the transfer of carbon, other chemical species, and sometimes heat from the geosphere to the ocean. Because these features sometimes tap fluids and gas originating kilometers below the seafloor, they provide an important window into deep processes that are otherwise inaccessible to scientists. At the shallow portion of their journey, migrating fluids nearing the seafloor contribute to a range of unique biological, physical, and chemical processes within the sediments themselves and at the sediment-water interface. Seafloor fluid emissions play a critical role in global biogeochemical cycles, ocean chemistry, and possibly even climate change. Seafloor leakage points often emit hydrocarbon gases (especially methane and CO 2 ) and are sometimes the loci for deposition of seafloor minerals that have economic value. A burgeoning area of research focuses on natural products generated at these features, seeking compounds with potential pharmaceutical or other applications. Multidisciplinary studies have become routine for characterization of seafloor fluid emission sites, attesting to the inseparability of geologic, physical, chemical, and biological processes in these settings. It is increasingly common for researchers to combine in a single research cruise: subbottom imaging and seafloor mapping; porewater and water column geochemistry and gas sampling; sediment retrieval for lithologic, biostratigraphic, and solid phase analyses; and studies of benthic and subseafloor communities at the microbial to macrofaunal scales. This multidisciplinary approach has the advantage of ensuring the spatial and temporal coincidence of surveys and samples, an important factor at highly dynamic seafloor fluid emission sites. In addition, researchers often use remotely operated vehicles (ROVs), autonomous underwater vehicles (AUVs), or human-occupied vehicles (HOVs) to record video of the seafloor, compile photomosaics, collect targeted samples, and survey with high-resolution geophysical near-seafloor systems, providing a degree of detail about seafloor fluid emission sites that is unprecedented compared to most areas of the deep ocean. While rarer, long-term cabled observatories or shorter-term deployments of portable observatories are also used at some loci for seafloor fluid flux and are particularly helpful for capturing temporal variations at these dynamic features. Here we summarize the Research Topic’s contribution to multidisciplinary seafloor emission studies in the categories of cold seeps, mud volcanoes, and hydrothermal vents. Figure 1 shows the geographic distribution of the studies in this Research Topic and key features referred to in this Introduction.

Frontiers in Earth Science↗
USGS2009

Water-level, borehole geophysical log, and water-quality data from wells transecting the freshwater/saline-water interface of the San Antonio segment of the Edwards Aquifer, South-Central Texas, 1999-2007

As a part of a 9-year (1999-2007) study done by the U.S. Geological Survey in cooperation with the San Antonio Water System to improve understanding of the San Antonio segment of the Edwards aquifer, south-central Texas, in and near the freshwater/saline-water transition zone of the aquifer, the U.S. Geological Survey collected water-level, borehole geophysical, and water-quality data during 1999-2007 from 37 wells arranged in nine transects (except for two wells) across the freshwater/saline-water interface of the aquifer. This report presents the data collected and also describes the data-collection, analytical, and quality-assurance methods used. The wells, constructed with casing from land surface into the upper part of the aquifer and completed as open hole in the aquifer, are in Uvalde County (East Uvalde transect), in Medina County (South Medina and Devine wells), in Bexar County (Pitluk, Mission, and San Antonio transects), in Comal and Guadalupe Counties (Tri-County transect), in Comal County (New Braunfels transect), and in Hays County (Fish Hatchery, San Marcos, and Kyle transects). Data collected included continuous water level at 18 wells; fluid electrical conductivity and temperature with depth (fluid profiles) obtained by borehole geophysical logging of 15 wells; discrete (periodic) samples for major ions and trace elements at 36 wells; stable isotopes or stable isotopes and tritium at 27 wells; dissolved gases obtained by pumping (or collecting flow) of 19 wells; and continuous specific conductance and temperature at three of the wells equipped with continuous water-level sensors.

Data Series↗
USGS2016

Hydrogeology and water quality of the Floridan aquifer system and effect of Lower Floridan aquifer withdrawals on the Upper Floridan aquifer at Barbour Pointe Community, Chatham County, Georgia, 2013

Two test wells were completed at the Barbour Pointe community in western Chatham County, near Savannah, Georgia, in 2013 to investigate the potential of using the Lower Floridan aquifer as a source of municipal water supply. One well was completed in the Lower Floridan aquifer at a depth of 1,080 feet (ft) below land surface; the other well was completed in the Upper Floridan aquifer at a depth of 440 ft below land surface. At the Barbour Pointe test site, the U.S. Geological Survey completed electromagnetic (EM) flowmeter surveys, collected and analyzed water samples from discrete depths, and completed a 72-hour aquifer test of the Floridan aquifer system withdrawing from the Lower Floridan aquifer. Based on drill cuttings, geophysical logs, and borehole EM flowmeter surveys collected at the Barbour Pointe test site, the Upper Floridan aquifer extends 369 to 567 ft below land surface, the middle semiconfining unit, separating the two aquifers, extends 567 to 714 ft below land surface, and the Lower Floridan aquifer extends 714 to 1,056 ft below land surface. A borehole EM flowmeter survey indicates that the Upper Floridan and Lower Floridan aquifers each contain four water-bearing zones. The EM flowmeter logs of the test hole open to the entire Floridan aquifer system indicated that the Upper Floridan aquifer contributed 91 percent of the total flow rate of 1,000 gallons per minute; the Lower Floridan aquifer contributed about 8 percent. Based on the transmissivity of the middle semiconfining unit and the Floridan aquifer system, the middle semiconfining unit probably contributed on the order of 1 percent of the total flow. Hydraulic properties of the Upper Floridan and Lower Floridan aquifers were estimated based on results of the EM flowmeter survey and a 72-hour aquifer test completed in Lower Floridan aquifer well 36Q398. The EM flowmeter data were analyzed using an AnalyzeHOLE-generated model to simulate upward borehole flow and determine the transmissivity of water-bearing zones. Aquifer-test data were analyzed with a two-dimensional, axisymmetric, radial, transient, groundwater-flow model using MODFLOW–2005. The flowmeter-survey and aquifer-test simulations provided an estimated transmissivity of about 60,000 square feet per day for the Upper Floridan aquifer and about 5,000 square feet per day for the Lower Floridan aquifer. Water in discrete-depth samples collected from the Upper Floridan aquifer, middle semiconfining unit, and Lower Floridan aquifer during the EM flowmeter survey in August 2013 was low in dissolved solids. Tested constituents were in concentrations within established U.S. Environmental Protection Agency drinking water-quality criteria. Concentrations of measured constituents in water samples from Lower Floridan aquifer well 36Q398 collected at the end of the 72-hour aquifer test in November 2013 were generally higher than in the discrete-depth samples collected during EM flowmeter testing in August 2013 but remained within established drinking water-quality criteria. Water-level data for the aquifer test were filtered for external influences such as barometric pressure, earth-tide effects, and long-term trends to enable detection of small (less than 1 ft) water-level responses to aquifer-test withdrawal. During the 72-hour aquifer test, the Lower Floridan aquifer was pumped at a rate of 750 gallons per minute resulting in a drawdown response of 35.5 ft in the pumped well; 1.6 ft in the Lower Floridan aquifer observation well located about 6,000 ft west of the pumped well; and responses of 0.7, 0.6, and 0.4 ft in the Upper Floridan aquifer observation wells located about 36 ft, 6,000 ft, and 6,800 ft from the pumped well, respectively

Georgia↗
USGS1976

A summary of petroleum potential, environmental geology, and the technology, time frame, and infrastructure for exploration and development of the western Gulf of Alaska

This summary of the regional geology, petroleum potential, geologic hazards and time frame for exploration of the western Gulf of Alaska has been written to aid the Bureau of Land Management in preparing the Draft Environmental Impact Statement. A preliminary version was written in Sept., 1975.(von Huene and others, 1975) in support of the Call for Nominations, Proposed OCS Oil and Gas Lease Sale #46. Since that time, there has been a substantial increase in information as the result of a two-month examination of recent studies of the adjacent Gulf of Alaska Tertiary Province and a preliminary interpretation of some publicly available common depth point (CDP) seismic reflection data recently acquired by the U.S. Geological Survey. The main source of geologic and geophysical data used in the preparation of this summary is published and unpublished information of the U.S. Geological Survey (Plafker and others, 1975,Bruns and Plafker, 1975; Carlson, Bruns and Molnia, 1975; Carlson and Molnia, 1975; Core, Mattick, and Bayer, 1975; Molnia and Carlson, 1975 a & b; von Huene and others, 1975). Prior to 1975, data were gathered mainly for purposes other than for assessment of oil and gas resources and of the environmental consequences of exploration and development. A systematic survey for such an assessment is planned for the summer of 1976 and, therefore, this summary is tentative. Although the major problems and regional setting are discussed in this paper, a great deal more specific data and interpretations will begin to become available in about one year. In this summary we consider the geology of a broad region on the continental shelf off the Kodiak group of islands and the Kenai Peninsula. We will concentrate on the area proposed for leasing in Sale #46. The area lies between about 56°N latitude and 60°N latitude (Fig. 1), and it measures approximately 660 km x 100 km. Water depths are generally less than 200 m.

Alaska↗
USGS2016

High-resolution geophysical data from the Inner Continental Shelf: South of Martha's Vineyard and north of Nantucket, Massachusetts

The U.S. Geological Survey and the Massachusetts Office of Coastal Zone Management have cooperated to map approximately 185 square kilometers of the inner continental shelf south of Martha’s Vineyard and north of Nantucket, Massachusetts. This report contains geophysical data collected by the U.S. Geological Survey during a survey in 2013. The geophysical data include (1) swath bathymetry collected by using interferometric sonar, (2) acoustic backscatter from the interferometric sonar, and (3) seismic-reflection profiles from a chirp subbottom profiler. These spatial data support research on the Quaternary evolution of coastal Massachusetts, the influence of sea-level change and sediment supply on coastal evolution, and efforts to understand the type, distribution, and quality of subtidal marine habitats in the coastal ocean of Massachusetts.

Massachusetts↗
USGS1985

Electrical geophysical investigations of massive sulfide deposits and their host rocks, West Shasta copper-zinc district

The West Shasta copper-zinc district, Shasta County, California, contains many volcanogenic sulfide deposits within Middle Devonian rhyolites that have not been highly metamorphosed. The district was selected by the U.S. Geological Survey for intensive geological, geochemical, and geophysical study under the Development of Assessment Techniques (DAT) project because accessible exposures have been created by erosion and mining. This report describes the geophysical methods applied to characterize the electrical properties of selected West Shasta massive sulfide deposits and their host rocks, at both small (less than 25 ft) and large (greater than 25 ft) scales. The electrical techniques used galvanic (spectral induced polarization--SIP) and induction (very low frequency--VLF, slingram, and time domain electro-magnetics--TDEM) methods.In situ spectral induced polarization measurements were carried out to determine whether or not conductive anomalies in the district could be differentiated by their polarization signatures. The sulfide, in situ, induced polarization-phase spectral signatures (the induced polarization effect as a function of frequency) have much less character and lack the distinctive shape reported for other massive sulfide deposits; however, they do have some identifiable massive sulfide traits, such as low resistivity and variable polarizability. The nondescript sulfide spectral signature is attributed to the poor development of polarization processes due to a high percentage of resistive, nonpolarizable gangue minerals, lack of pore space, and limited electrolytic fluids. Large-scale spectral induced polarization measurements over the Hornet orebody have a greater polarization than the in situ measurements. This observation, in addition to the fact that much of the Hornet sulfide body has been removed by previous mining activity, suggests that the dominant polarization processes occur at the ground-water-sulfide interface.Combined use of induction techniques, which have different depths of penetration, were used to locate conductive anomalies and determine their shape and depth. All the induction surveys over the Hornet orebody detected the conductive tabular-shaped massive pyritic sulfide deposit hosted in resistive rhyolite. Shallow penetrating induction methods near the Keystone mine detected a conductive fault zone where a block of shale has been downfaulted into volcanic rock. Integrated interpretation of deeper penetrating induction data over this conductive fault zone indicates that parts of the shale are also conductive, demonstrating that the integrated use of several induction methods provides better conductor definition than a single method.

Economic Geology↗
USGS2009

Sand resources, regional geology, and coastal processes of the Chandeleur Islands Coastal System: An evaluation of the Breton National Wildlife Refuge

Breton National Wildlife Refuge, the Chandeleur Islands chain in Louisiana, provides habitat and nesting areas for wildlife and is an initial barrier protecting New Orleans from storms. The U.S. Geological Survey (USGS) in partnership with the University of New Orleans Pontchartrain Institute for Environmental Sciences undertook an intensive study that included (1) an analysis of island change based on historical maps and remotely sensed shoreline and topographic data; (2) a series of lidar surveys at 3- to 4-month intervals after Hurricane Katrina to determine barrier island recovery potential; (3) a discussion of sea level rise and effects on the islands; (4) an analysis of sea floor evolution and sediment dynamics in the refuge over the past 150 years; (5) an assessment of the local sediment transport and sediment resource availability based on the bathymetric and subbottom data; (6) a carefully selected core collection effort to groundtruth the geophysical data and more fully characterize the sediments composing the islands and surrounds; (7) an additional survey of the St. Bernard Shoals to assess their potential as a sand resource; and (8) a modeling study to numerically simulate the potential response of the islands to the low-intensity, intermediate, and extreme events likely to affect the refuge over the next 50 years. Results indicate that the islands have become fragmented and greatly diminished in subaerial extent over time: the southern islands retreating landward as they reorganize into subaerial features, the northern islands remaining in place. Breton Island, because maintenance of the Mississippi River-Gulf Outlet (MRGO) outer bar channel requires dredging, is deprived of sand sufficient to sustain itself. Regional sediment transport trends indicate that large storms are extremely effective in transporting sand and controlling the shoreline development and barrier island geometry. Sand is transported north and south from a divergent zone near Monkey Bayou at the southern end of the Chandeleur Islands. Numerical simulation of waves and sediment transport supports the geophysical results and indicates that vast areas of the lower shoreface are affected and are undergoing erosion during storm events, that there is little or no fair weather mechanism to rework material into the littoral system, and that as a result, there is a net loss of sediment from the system. Lidar surveys revealed that the island chain immediately after Hurricane Katrina lost about 84 percent of its area and about 92 percent of its prestorm volume. Marsh platforms that supported the islands’ sand prior to the storm were reduced in width by more than one-half. Repeated lidar surveys document that in places the shoreline has retreated about 100 m under the relatively low-energy waves since Hurricanes Katrina and Rita; however, this retreat is nonuniform. Recent high-resolution geophysical surveys of the sea floor and subsurface within 5–6 km of the Chandeleur Islands during 2006 and 2007 show that, in addition to the sand that is rebuilding portions of the island chain, a large volume of sand is contained in Hewes Point, in an extensive subtidal spit platform that has formed at the northern end of the Chandeleur Islands. Hewes Point appears to be the depositional terminus of the alongshore transport system. In the southern Chandeleurs, sand is being deposited in a broad tabular deposit near Breton Island called the southern offshore sand sheet. These two depocenters account for approximately 70 percent of the estimated sediment volume located in potential borrow sites. An additional large potential source of sand for restoration lies in the St. Bernard Shoals, which are estimated to contain approximately 200 × 10 6 m 3 of sand. Successful restoration planning for the Breton National Wildlife Refuge should mimic the natural processes of early stages of barrier island evolution including lateral transport to the flanks of the island chain from a centralized sand source that will ultimately enhance the ability of the islands to naturally build backbarrier marsh, dunes, and a continuous sandy shoreline. Barrier island sediment nourishment should be executed with the understanding that gulf shoreline erosion is inevitable but that island area can be maintained and enhanced during retreat (thus significantly prolonging the life of the island chain) with strategic sand placement.

Louisiana↗
USGS2005

Use of a square-array direct-current resistivity method to detect fractures in crystalline bedrock in New Hampshire

Azimuthal square-array direct-current (dc) resistivity soundings were used to detect fractures in bedrock in the Mirror Lake watershed in Grafton County, New Hampshire. Soundings were conducted at a site where crystalline bedrock underlies approximately 7 m (meters) of glacial drift. Measured apparent resistivities changed with the orientation of the array. Graphical interpretation of the square-array data indicates that a dominant fracture set and (or) foliation in the bedrock is oriented at 030° (degrees). Interpretation of crossed square-array data indicates an orientation of 027° and an anisotropy factor of 1.31. Assuming that anisotropy is due to fractures, the secondary porosity is estimated to range from 0.01 to 0.10. Interpretations of azimuthal square-array data are supported by other geophysical data, including azimuthal seismic-refraction surveys and azimuthal Schlumberger dc-resistivity soundings at the Camp Osceola well field. Dominant fracture trends indicated by these geophysical methods are 022° (seismic-refraction) and 037° (dc-resistivity). Fracture mapping of bedrock outcrops at a site within 250 m indicates that the maximum fracture-strike frequency is oriented at 030°. The square-array dc-resistivity sounding method is more sensitive to a given rock anisotropy than the more commonly used Schlumberger and Wenner arrays. An additional advantage of the square-array method is that it requires about 65 percent less surface area than an equivalent survey using a Schlumberger or Wenner array.

New Hampshire↗
USGS1980

Geophysical-geological analysis of Fairfax County, Virginia

Aeromagnetic, aeroradioactivity, and gravity surveys of Fairfax County, Virginia, are interpreted with the aid of existing geologic data and local geophysical measurements. Highly magnetic metasedimentary rocks of the Peters Creek Schist and Sykesville Formation produce most of the magnetic anomalies of Fairfax County. In contrast, the granitoid rocks of the Occoquan pluton are relatively non-magnetic and are characterized by broad magnetic and gravity lows. Linear magnetic highs without corresponding gravity anomalies, plus samples from a test well, indicate that Peters Creek Schist underlies the east side of the Triassic-Jurassic Culpeper basin. The continuation of the Piney Branch mafic-ultramafic complex beneath the basin is indicated by a gravity high. Basement lithology beneath the Coastal Plain sediments is interpreted by the following anomaly combinations: Sykesville Formation - magnetic high with no gravity expression; Chopawamsic Formation -magnetic and corresponding gravity high; Occoquan granitoid rocks -magnetic and corresponding gravity low. Analysis of a detailed gravity profile across a diabase body near Herndon indicates that the intrusive is a sill which is partly discordant with the sedimentary rocks of the Culpeper basin. The limbs of the horseshoe-shaped exposure dip gently toward the center; the west limb, 500 m thick, dips 15° east and the east limb, 250 m thick, dips west 3° or less. A second gravity profile across a similar diabase body near Centreville suggests that part of its western limb consists of a narrow dike-like body projecting upwards from a 200 m-thick buried sill. Both of these bodies apparently have a spoon-shaped structure with a discordant northern edge which was probably controlled by faulting. Similarities between these intrusives apply also to the small Boyds diabase in Maryland. The three diabase bodies are aligned, have similar magnetic expressions, and abut the edge of the Culpeper basin, suggesting that they were intruded under similar structural settings at about the same time. The northward decrease in size of these intrusives may be a consequence of the inward-dipping shape and a greater degree of uplift and deeper erosion to the north. By this reasoning, the Boyds body represents only the basal remnant of a largely eroded structure with the Centreville body preserving more of the original form. A ground magnetometer survey and an aeroradioactivity survey indicate the presence of additional zones in the thermal metamorphic aureole in the sedimentary rocks around the large diabase bodies. A 150-300-m-wide inner magnetite-rich zone above and below the Herndon sill is inferred from anomalies on a detailed ground magnetic profile. Aeroradioactivity data show a rim of high values outside the geologically mapped aureole of both the Herndon and Centreville bodies. This suggests a subtle outer zone slightly enriched in thermally expelled radio-elements. Deep resistivity soundings in the Culpeper basin indicate that the sedimentary rocks may reach a thickness of about 3600 feet (1100 m) at the western edge of the county.

Virginia↗
USGS1962

Geology of the Straight Creek tunnel site, Clear Creek and Summit Counties, Colorado, and its predicted effect on tunnel construction

The purpose of this report is to present the preliminary results of the geologic and geophysical research conducted by the U. S. Geological Survey at the surface over the proposed Straight Creek tunnel. The results are interpreted and predictions are made, based primarily on statistical analyses, as to the probable geologic conditions at the depth of the tunnel, and how these conditions may influence the engineering design and construction of the tunnel. It is expected that continued geologic and geophysical research by the Geological Survey, and we hope by others also, during progress of the tunnel will result in an evaluation of the methods here employed that will be of general interest to the geologic and engineering professions.

Colorado↗