USGS Science⌕ Search

SEARCH · USGS Science

Results for “Interpretation”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 919 records · Page 51Linked to original sources
USGS1986

Minturn and Sangre de Cristo formations of Southern Colorado: A prograding fan delta and alluvial fan sequence shed from the ancestral Rocky Mountains

The Middle Pennsylvania!) Minturn Formation and the Pennsylvanian-Permian Sangre de Cristo Formation of the northern Sangre de Cristo Range form a thick progradational sequence of coarse clastic sediments. These sediments were deposited along the western margin of the central Colorado trough during uplift of the late Paleozoic Uncompahgre highland, a major structural and topographic feature of the Ancestral Rocky Mountains. The Minturn is composed mostly of sandstone and shale deposited by fan deltas that prograded into the central Colorado trough. The Minturn of the northern Sangre de Cristo Range is divisible into a turbidite-bearing facies, a limestone-bearing facies, and a redbed facies. The turbidite-bearing facies is interpreted as deposits of fan deltas that prograded onto the sea bottom below wave base. The limestone-bearing facies is interpreted as deposits of fan deltas that prograded onto a shallow sea bottom above wave base. In this facies, sandstones containing deltaic foresets overlie thin shallow marine limestones and are considered diagnostic of that facies. Both facies contain thick intervals of sandstone and shale interpreted as deltaic and alluvial deposits. Where it onlaps the Uncompahgre highland, the lower part of the Minturn Formation contains quartzose and arkosic redbeds of probable alluvial origin. The continental Sangre de Cristo Formation conformably overlies the Minturn Formation basinward, but it unconformably overlies the Minturn and Precambrian basement near the Uncompahgre highland. The Sangre de Cristo contains two facies. A sandstone facies consists of fining-upward cycles of red conglomeratic sandstone and siltstone interpreted as braided stream deposits on distal parts of alluvial fans. A conglomerate facies (Crestone Conglomerate Member) consists of poorly sorted conglomerates interpreted as debris flow and mudflow deposits and sorted conglomerate and sandstone interpreted as streamflow and sheetflow deposits on proximal parts of alluvial fans. The fan deltas and alluvial fans that deposited the Minturn and Sangre de Cristo formations probably developed in response to faulting and uplift of the Uncompahgre highland. The highland rose at least three times from Middle Pennsylvanian to Early Permian time. Later, during the Laramide orogeny, the faulted boundary between the highland and the central Colorado trough was destroyed by thrusting. The boundary faults were not strike-slip, as shown by the distribution of clasts in conglomerates directly downstream from identical Precambrian rocks that represent part of the highland.

Colorado↗
USGS2002

Comparing landslide inventories: The map depends on the method

Landslide inventory maps are generally prepared by interpreting the geomorphic expression of landsliding on aerial photos, topographic maps, or on the ground. Distinctive landslide geomorphology allows the recognition and mapping of landslides, although there are always landslides that have very subtle expression and are not identified. The difficulties of mapping landslides based on their geomorphic expression are amplified in heavily forested terrain. The ground surface is obscured by tree cover on aerial photographs, and landslide-related features are often hidden. This limitation affects not only aerial photo interpretation, but also interpretation of topographic maps, which are based on aerial photographs. We compared five maps showing landslides in the Laurel Quadrangle in the Santa Cruz Mountains, California. These include a geologic map, a map prepared for the county based on interpretation of aerial photographs, a map prepared by us based on aerial photographs and compilation of previous work, a map of features interpreted from the U.S. Geological Survey 7.5-minute topographic map, and a detailed field-based landslide map. Comparison of these maps shows that the geologic map identifies few landslides, but most landslides on the geologic map are also shown on the other maps. The two maps based mainly on aerial photo interpretation tend to show the larger slides, but there is only about 60 percent correspondence of landslide areas between the two. Comparing the reconnaissance techniques with the much more detailed field mapping shows that the reconnaisance maps emphasize the large slides of bedrock and identify a lower percentage of shallow debris slides and debris flows.

Environmental & Engineering Geoscience↗
USGS2014

Base of principal aquifer for parts of the North Platte, South Platte, and Twin Platte Natural Resources Districts, western Nebraska

Water resources in the North and South Platte River valleys of Nebraska, including the valley of Lodgepole Creek, are critical to the social and economic health of the area, and for the recovery of threatened and endangered species in the Platte River Basin. Groundwater and surface water are heavily used resources, and uses are regulated in the study area. Irrigation is the dominant water use and, in most instances, is supplied by both groundwater and surface-water sources. The U.S. Geological Survey and its partners have collaborated to use airborne geophysical surveys for areas of the North and South Platte River valleys including the valley of Lodgepole Creek in western Nebraska. The objective of the surveys was to map the aquifers and underlying bedrock topography of selected areas to help improve the understanding of groundwater–surface-water relations to guide water-management decisions. This project was a cooperative study involving the North Platte Natural Resources District, the South Platte Natural Resources District, the Twin Platte Natural Resources District, the Conservation and Survey Division of the University of Nebraska-Lincoln, and the Nebraska Environmental Trust. This report presents the interpreted base-of-aquifer surface for part of the area consisting of the North Platte Natural Resources District, the South Platte Natural Resources District, and the Twin Platte Natural Resources District. The interpretations presented herein build on work done by previous researchers from 2008 to 2009 by incorporating additional airborne electromagnetic survey data collected in 2010 and additional test holes from separate, related studies. To make the airborne electromagnetic data useful, numerical inversion was used to convert the measured data into a depth-dependent subsurface resistivity model. An interpretation of the elevation and configuration of the base of aquifer was completed in a geographic information system that provided x, y, and z coordinates. The process of interpretation involved manually picking locations (base-of-aquifer elevations) on the displayed airborne electromagnetic-derived resistivity profile by the project geophysicist, hydrologist, and geologist. These locations, or picks, of the base-of-aquifer elevation (typically the top of the Brule Formation of the White River Group) were then stored in a georeferenced database. The pick was made by comparing the inverted airborne electromagnetic-derived resistivity profile to the lithologic descriptions and borehole geophysical logs from nearby test holes. The database of interpretive picks of the base-of-aquifer elevation was used to create primary input for interpolating the new base-of-aquifer contours. The automatically generated contours were manually adjusted based on the interpreted location of paleovalleys eroded into the base-of-aquifer surface and associated bedrock highs, many of which were unmapped before this study. When contours are overlain by the water-table surface, the saturated thickness of the aquifer can be computed, which allows an estimate of total water in storage. The contours of the base-of-aquifer surface presented in this report may be used as the lower boundary layer in existing and future groundwater-flow models. The integration of geophysical data into the contouring process facilitated a more continuous and spatially comprehensive view of the hydrogeologic framework.

Nebraska↗
USGS2022

Revisions to the Virginia Coastal Plain hydrogeologic framework southwest of the James River

New drilling information reveals that altitudes of some hydrogeologic units of the Virginia Coastal Plain aquifer system differ by as much as 50 feet (ft) from those previously known, namely the Aquia and Potomac aquifers, the Potomac confining zone, and the Nanjemoy-Marlboro and Saint Marys confining units. In addition, the lateral margins of some hydrogeologic units are located as much as several miles from previously estimated locations. The largest revisions to unit margins were for the Aquia aquifer and the Nanjemoy-Marlboro and Saint Marys confining units. Interpretation of new geophysical logs, sediment core, and cuttings as well as revised interpretations to existing data indicate channels and embayments are also preserved on eroded top surfaces of the shallowest hydrogeologic units including the Yorktown confining zone, Yorktown-Eastover aquifer, Saint Marys confining unit, Potomac confining zone, and Potomac aquifer. Enhanced details on the configuration of part of the aquifer system southwest of the James River are provided by sediment cores and cuttings as well as geophysical logs from 36 recently drilled boreholes. These, along with reinterpretation of data from 93 preexisting boreholes, form the basis for revised top-surface altitudes and margins of hydrogeologic units beneath parts of Prince George, Surry, Sussex, Isle of Wight, and Southampton Counties and the cities of Franklin and Suffolk. Groundwater withdrawals in the Virginia Coastal Plain cause widespread water-level declines, create the potential for saltwater intrusion, and contribute to regionwide land subsidence. A description of the aquifer system, termed a hydrogeologic framework, was developed by the U.S. Geological Survey in 2006 and provides information needed to base withdrawal-permitting decisions by the Virginia Department of Environmental Quality. This revision of part of the hydrogeologic framework southwest of the James River is based on interpretations of both new and previously analyzed borehole data. The revision is strictly confined to the study area extent and hydrogeologic units not found within the study area were not revised and are not discussed in this report. The newly determined hydrogeologic-unit altitudes and margins have implications for groundwater-withdrawal permitting. New interpretations have found that the Yorktown Eastover aquifer is absent in the southwestern part of the City of Suffolk, owing to what is most likely an isolated area of sediment-texture facies change. Most notably, the top-surface altitudes of the Aquia and Potomac aquifers have been lowered by as much as 50 ft from previous interpretations. This means that wells previously believed to be screened in the top of the Potomac aquifer could, based on these new interpretations, be screened in the bottom of the Aquia aquifer. These changes to aquifers in which wells are screened means that there is potentially more room in the groundwater withdrawal permitting for the Potomac aquifer, the largest and most productive aquifer in Virginia, and overpumping occurring in the Aquia aquifer.

Virginia↗
USGS2000

Electromagnetic surveys to detect clay-rich sediment in the Rio Grande inner valley, Albuquerque area, New Mexico

Information on the presence of clay-rich layers in the inner-valley alluvium is essential for quantifying the amount of water transmitted between the Rio Grande and the Santa Fe Group aquifer system. This report describes a study that used electromagnetic surveys to provide this information. In the first phase of the study, electromagnetic soundings were made using time-domain and frequency-domain electro- magnetic methods. On the basis of these initial results, the time- domain method was judged ineffective because of cultural noise in the study area, so subsequent surveys were made using the frequency-domain method. For the second phase of the study, 31 frequency-domain electromagnetic surveys were conducted along the inner valley and parallel to the Rio Grande in the Albuquerque area in the spring and summer of 1997 to determine the presence of hydrologically significant clay-rich layers buried in the inner-valley alluvium. For this report, the 31 survey sections were combined into 10 composite sections for ease of interpretation. Terrain-conductivity data from the surveys were modeled using interpretation software to produce geoelectric cross sections along the survey lines. This modeling used lithologic logs from two wells installed near the survey lines: the Bosque South and Rio Bravo 5 wells. Because of cultural interference, location of the wells and soundings, complex stratigraphy, and difficulty interpreting lithology, such interpretation was inconclusive. Instead, a decision process based on modeling results was developed using vertical and horizontal dipole 40-meter intercoil spacing terrain-conductivity values. Values larger than or equal to 20 millisiemens per meter were interpreted to contain a hydrologically significant thickness of clay-rich sediment. Thus, clay-rich sediment was interpreted to underlie seven segments of the 10 composited survey lines, totaling at least 2,660 meters of the Rio Grande inner valley. The longest of these clay-rich segments is a 940-meter reach between Bridge and Rio Bravo Boulevards.

Water-Resources Investigations Report↗
USGS2001

Cross-hole radar scanning of two vertical, permeable, reactive-iron walls at the Massachusetts Military Reservation, Cape Cod, Massachusetts

A pilot-scale study was conducted by the U.S. Army National Guard (USANG) at the Massachusetts Military Reservation (MMR) on Cape Cod, Massachusetts, to assess the use of a hydraulic-fracturing method to create vertical, permeable walls of zero-valent iron to passively remediate ground water contaminated with chlorinated solvents. The study was conducted near the source area of the Chemical Spill-10 (CS-10) plume, a plume containing chlorinated solvents that underlies the MMR. Ground-water contamination near the source area extends from about 24 m (meters) to 35 m below land surface. The USANG designed two reactive-iron walls to be 12 m long and positioned 24 to 37 m below land surface to intersect and remediate part of the CS-10 plume.Because iron, as an electrical conductor, absorbs electromagnetic energy, the US Geological Survey used a cross-hole common-depth, radar scanning method to assess the continuity and to estimate the lateral and vertical extent of the two reactive-iron walls. The cross-hole radar surveys were conducted in boreholes on opposite sides of the iron injection zones using electric-dipole antennas with dominant center frequencies of 100 and 250 MHz. Significant decreases in the radar-pulse amplitudes observed in scans that traversed the injection zones were interpreted by comparing field data to results of two-dimensional finite-difference time-domain numerical models and laboratory-scale physical models.The numerical and physical models simulate a wall of perfectly conducting material embedded in saturated sand. Results from the numerical and physical models show that the amplitude of the radar pulse transmitted across the edge of a conductive wall is about 43 percent of the amplitude of a radar pulse transmitted across background material. The amplitude of a radar pulse transmitted through a hole in a conductive wall increases as the aperture of the hole increases. The modeling results indicate that holes with an aperture of less than 40 percent of the dominant wavelength of the radar pulse are not likely to be detected.Based on the results of the numerical and physical modeling, the decreases in radar-pulse amplitudes observed in scans traversing the injection zones are interpreted as electrically conductive zones that outline the distribution of iron. The area interpreted as iron in the northern A-wall contains two zones -- an upper zone about 10 m wide, extending from about 25 to 31 m below land surface, and a lower zone about 8 m wide, extending from 31.5 to 34.5 m below land surface. The area interpreted as iron in the southern B-wall is about 9 m wide, extending from about 27 to 34.5 m below land surface. No discrete holes were interpreted in either the A- or B-wall zones.The interpretation of the field data suggests that (1) the hydraulic-fracturing method introduced iron into the subsurface, but not in the dimensions originally proposed; (2) the iron within the treatment zones is distributed in a generally continuous manner; and (3) excluding the discontinuity in the A-wall, holes within the iron treatment zone, if any, exist at scales smaller than about 10 cm, the resolution limit of the radar antennas and acquisition geometry used for this study. The cross-hole radar method appears to have been an effective method for delineating the distribution of iron in the two walls; however, the veracity of the results cannot be ascertained without excavation or drilling into the treatment zone.

Massachusetts↗
USGS1999

Surface-geophysical investigation of the University of Connecticut landfill, Storrs, Connecticut

A surface-geophysical investigation of the former landfill area at the University of Connecticut in Storrs, Conn. was conducted as part of a preliminary hydrogeologic assessment of the contamination of soil, surface water, and ground water at the site. Geophysical data were used to help determine the dominant direction of fracture strike; subsurface structure of the landfill; locations of possible leachate plumes, fracture zones or conductive lithologic layers; and the location and number of chemical waste-disposal pits. Azimuthal square-array direct-current (dc) resistivity, two-dimensional (2D) dc-resistivity, inductive terrain conductivity, and ground-penetrating radar (GPR) were the methods used to characterize the landfill area.The dominant strike direction of bedrock fractures interpreted from azimuthal square-array resistivity data is north, ranging from 285 to 30 degrees east of True North. These results complement local geologic maps that identify bedrock foliation and fractures that strike approximately north-south and dip 30 to 40 degrees west.The subsurface structure of the landfill was imaged with 2D dc-resistivity profiling data, which were used to interpret a landfill thickness of 10 to 15 meters. Orientation of the landfill trash disposal trenches were detected by azimuthal square-array resistivity soundings; the dimension and the orientation of the trenches were verified by aerial photographs.Inductive terrain conductivity and 2D dc-resistivity profiling detected conductive anomalies that were interpreted as possible leachate plumes near two surface-water discharge areas. The conductive anomaly to the north of the landfill is interpreted to be a shallow leachate plume and dissipates to almost background levels 45 meters north of the landfill. The anomaly to the southwest is interpreted to extend vertically through the overburden and into the shallow bedrock and laterally along the intermittent drainage to Eagleville Brook, terminating 140 meters south of the landfill. Inductive terrain conductivity and 2D dc-resistivity profiling also detected two dipping, sheet-like conductive features that extend vertically into the bedrock. These features were interpreted either as fracture zones filled with conductive fluids or conductive lithologic layers between more resistive layers. One dipping conductive feature was detected south of the landfill, and the other feature was detected to the west of the former chemical waste-disposal pits. Both anomalies strike approximately north-south and dip about 30 degrees to the west.GPR was used unsuccessfully to locate the former chemical waste-disposal pits. Although the entire overburden and the upper few meters of bedrock were imaged, no anomalous features were detected with GPR that could be correlated with the pits. It is possible that the area surveyed by GPR was entirely backfilled after the soil was removed from the site and that the outline of the former chemical waste-disposal pits no longer exists.

Connecticut↗
USGS1987

Use of low-altitude aerial photography to identify submersed aquatic macrophytes

The feasibility of using low-altitude aerial photography to identify beds of submersed macrophytes is demonstrated. True color aerial photos and collateral ground survey information for submersed aquatic macrophyte beds at 10 sites in the St.Clair-Detroit River system were obtained in September 1978. Using the photos and collateral ground survey information, a dichotomous key was developed for the identification of six classes - beds of five genera of macrophytes and one substrate type. A test was prepared to determine how accurately photo interpreters could identify the six classes. The test required an interpreter to examine an unlabeled, outlined area on photographs and identify it using the key. Six interpreters were tested. One pair of interpreters was trained in the interpretation of a variety of aerial photos, a second pair had field experience in the collection and identification of submersed macrophytes in the river system, and a third pair had neither training in the interpretation of aerial photos nor field experience. The criteria that we developed were applied equally well by the interpretors, regardless of their training or experience. Overall accuracy (i.e., omission errors) of all six classes combined was 68% correct, whereas, overall accuracy of individual classes ranged from 50 to 100% correct. Mapping accuracy (i.e. omission and commission errors) of individual classes ranged from 36 to 75%. Although the key developed for this study has only limited application outside the context of the data and sites examined in this study, it is concluded that low-altitude aerial photography, together with limited amounts of collateral ground survey information, can be used to economically identify beds of submersed macrophytes in the St. Clair-Detroit River system and other similar water bodies.

Conference Paper↗
USGS2021

California deepwater investigations and groundtruthing (Cal DIG) I: Fault and shallow geohazard analysis offshore Morro Bay

The California Deepwater Investigations and Groundtruthing (Cal DIG) I project focuses on the potential seafloor hazards and impacts of alternative energy infrastructure in the outer continental shelf region offshore of south-central California. This is one of three reports covering a single study area located between Monterey and Point Conception, California in federal waters outside of the State of California three nautical mile limit and in water depths of 400 to 1500 meters. The goal of this report is to provide baseline geologic interpretations of the area for the purpose of improving regional models of shallow geologic hazards and sedimentary processes. Geophysical and geological data from this project will help to address important issues associated with marine spatial planning and potential offshore infrastructure development, such as offshore floating wind turbines. Datasets covered in this report include comprehensive high-resolution sub-bottom (multi-channel and Chirp seismic reflection profiles), seafloor (bathymetry), and sampling (piston, gravity, and vibracore) data collected in 2018-2019 during a series of seven seagoing geological and geophysical surveys. Specifically, this report outlines interpretation of subsurface geologic structure from the geophysical data, details preliminary core analysis results related to fluid, gas, and sediment transport activity, provides interpretations of the current geohazards in the area, and suggests next steps for improving interpretations of geohazard processes. Specific targets of geohazard interest in the study area are geological structures such as faults and folds, seafloor pockmarks within a large field (the Big Sur pockmark field), submarine channels, and mass wasting (slope failure) features. The vast majority of faults and other structures in the study occur within sediment and rock formations we interpret to be pre-Quaternary (older than 2.58 Myr BP), and thus we interpret that these structures are unlikely to present significant current hazard to seabed infrastructure, although we note that the numerous structures mapped in the study area may have the potential to become reactivated. Similarly, we find no new evidence of Holocene (younger than 11,650 years BP) fluid or gas advection in the Big Sur pockmark field. However, such fluid and gas hazards are currently difficult to assess, as additional analyses and sampling of existing core data is needed to better understand pockmark formation processes and potential gas accumulations we have mapped in the subsurface. Mass wasting along the eastern and western edges of the Santa Lucia Bank during earthquakes, as well as sediment transport down the Lucia Chica and San Simeon channels, are among the most significant, although still likely infrequent during the Holocene, hazards to seabed stability in the study area. Further analyses of the existing cores, including radiocarbon dating, stable isotope, and compositional analyses, are again needed to better understand the timing and sources of the numerous sand deposits found throughout the study area, which may have been transported downslope due to mass wasting and/or earthquake shaking processes.

California↗
USGS2024

Geophysical identification of potential groundwater – surface water interactions in the Bonita Peak Mining District, San Juan County, Colorado

This report includes the results and interpretation of geophysical investigations to aid in the location, identification, and conceptual site model (CSM) development of the near surface groundwater and surface water hydrology of the Upper Cement Creek and California Gulch of the Animas Rivers within the Bonita Peak Mining Districts (BPMD). Mine influenced water (MIW) from numerous mine adits within the BPMD has altered the geochemistry and ecology of these ground and surface waters. Many studies of varying scales have investigated the geology, hydrogeology, geochemistry, and aqueous chemistry of these adits and impacted areas. Field investigations using non-invasive geophysical methods were conducted in the summer of 2019 to aid in identifying potential groundwater inputs to these streams and further the CSM of the near surface within and along these streams. Two field deployments were completed in August and September of 2019. In August 2019, Phase 1 was completed using multifrequency electromagnetic induction (EMI) and thermal infrared imaging (TIR) to measure the bulk electrical conductivity, magnetic susceptibility, and the temperature response at known and suspected groundwater seeps into the Upper Cement Creek and California Gulch stretches of these alpine streams. Results and interpretation from Phase 1 were used to co-locate stretches of these streams for further detailed fiber optic distributed temperature system (FODTS) monitoring of the temperature dynamics for submeter identification of potential groundwater seeps during Phase 2. Phase 2 included additional EMI measurements, FODTS measurements, and repeated some Phase 1 measurements for improved data quality. All these data were used for the combined qualitative interpretation identifying seep locations. The data from both Phase 1 and Phase 2 are available in the USGS data release at: https://www.sciencebase.gov/catalog/item/5f18a30082cef313ed84879b. These data include detailed near-surface electrical conductivity and magnetic susceptibility mapping, discrete TIR imaging, and several kilometers of FODTS data. These data were georeferenced and used to identify potential groundwater seeps into these streams. The results indicate a complex near surface geophysical and hydrogeologic regime. Seeps are classified and spatially correlated to the EMI, TIR, and geochemical sampling results. This report is a thorough compilation of the geophysical field efforts in the summer of 2019, the data processing, and interpretations of these data. These data alone should not be used for final interpretations of the complex hydrogeology within these alpine systems. Rather, these data should be combined with other known data from various investigations to further refine the CSM and guide decisions for future investigations, watershed protective measures, and other site decisions. Geographical information system (GIS) layers of these results are available to project managers for such integration and combined interpretations.

Colorado↗
USGS2026

Revisiting the geochronology of late Quaternary marine terraces and uplift rates in coastal Santa Barbara County, California, USA

In several early studies, central California marine terraces between Santa Barbara and Point Conception were interpreted to record sea-level high stands of the last interglacial complex, ∼80 ka to ∼120 ka (marine isotope stage [MIS] 5). These ages and their elevations (∼20 m to ∼45 m) indicate modest rates of tectonic uplift, similar to those from other localities in southern and central California. A recent study, using a combination of luminescence and radiocarbon dating, has challenged the older age interpretations, implying much younger terrace ages, between ∼40 ka and ∼55 ka (MIS 3). From these new ages and a considerably lower sea level during MIS 3, much higher rates of tectonic uplift are inferred. In the present study, new uranium-series ages of terrace corals and amino acid age estimates of terrace mollusks were determined to test these competing interpretations. With the exception of a low-elevation terrace in Isla Vista (near Santa Barbara) that dates to MIS 3, terraces farther west are interpreted to date to MIS 5 and imply tectonic uplift rates of 0.20–0.34 m/kyr. A compilation of data for the region yields a decreasing rate of late Quaternary uplift from east, near Ventura, to west, near Point Conception. This trend is interpreted to reflect a decreasing influence of the processes of compression and crustal shortening south of the Big Bend in the San Andreas fault.

California↗
USGS2017

Chemistry of diagenetic features analyzed by ChemCam at Pahrump Hills, Gale crater, Mars

The Curiosity rover's campaign at Pahrump Hills provides the first analyses of lower Mount Sharp strata. Here we report ChemCam elemental composition of a diverse assemblage of post-depositional features embedded in, or cross-cutting, the host rock. ChemCam results demonstrate their compositional diversity, especially compared to the surrounding host rock: (i) Dendritic aggregates and relief enhanced features, characterized by a magnesium enhancement and sulfur detection, and interpreted as Mg-sulfates; (ii) A localized observation that displays iron enrichment associated with sulfur, interpreted as Fe-sulfate; (iii) Dark raised ridges with varying Mg- and Ca-enriched compositions compared to host rock; (iv) Several dark-toned veins with calcium enhancement associated with fluorine detection, interpreted as fluorite veins. (v) Light-toned veins with enhanced calcium associated with sulfur detection, and interpreted as Ca-sulfates. The diversity of the Pahrump Hills diagenetic assemblage suggests a complex post-depositional history for fine-grained sediments for which the origin has been interpreted as fluvial and lacustrine. Assessment of the spatial and relative temporal distribution of these features shows that the Mg-sulfate features are predominant in the lower part of the section, suggesting local modification of the sediments by early diagenetic fluids. In contrast, light-toned Ca-sulfate veins occur in the whole section and cross-cut all other features. A relatively late stage shift in geochemical conditions could explain this observation. The Pahrump Hills diagenetic features have no equivalent compared to targets analyzed in other locations at Gale crater. Only the light-toned Ca-sulfate veins are present elsewhere, along Curiosity's path, suggesting they formed through a common late-stage process that occurred at over a broad area.

Icarus↗
USGS2014

Pluvial lakes in the Great Basin of the western United States: a view from the outcrop

Paleo-lakes in the western United States provide geomorphic and hydrologic records of climate and drainage-basin change at multiple time scales extending back to the Miocene. Recent reviews and studies of paleo-lake records have focused on interpretations of proxies in lake sediment cores from the northern and central parts of the Great Basin. In this review, emphasis is placed on equally important studies of lake history during the past ∼30 years that were derived from outcrop exposures and geomorphology, in some cases combined with cores. Outcrop and core records have different strengths and weaknesses that must be recognized and exploited in the interpretation of paleohydrology and paleoclimate. Outcrops and landforms can yield direct evidence of lake level, facies changes that record details of lake-level fluctuations, and geologic events such as catastrophic floods, drainage-basin changes, and isostatic rebound. Cores can potentially yield continuous records when sampled in stable parts of lake basins and can provide proxies for changes in lake level, water temperature and chemistry, and ecological conditions in the surrounding landscape. However, proxies such as stable isotopes may be influenced by several competing factors the relative effects of which may be difficult to assess, and interpretations may be confounded by geologic events within the drainage basin that were unrecorded or not recognized in a core. The best evidence for documenting absolute lake-level changes lies within the shore, nearshore, and deltaic sediments that were deposited across piedmonts and at the mouths of streams as lake level rose and fell. We review the different shorezone environments and resulting deposits used in such reconstructions and discuss potential estimation errors. Lake-level studies based on deposits and landforms have provided paleohydrologic records ranging from general changes during the past million years to centennial-scale details of fluctuations during the late Pleistocene and Holocene. Outcrop studies have documented the integration histories of several important drainage basins, including the Humboldt, Amargosa, Owens, and Mojave river systems, that have evolved since the Miocene within the active tectonic setting of the Great Basin; these histories have influenced lake levels in terminal basins. Many pre-late Pleistocene lakes in the western Great Basin were significantly larger and record wetter conditions than the youngest lakes. Outcrop-based lake-level data provide important checks on core-based proxy interpretations; we discuss four such comparisons. In some cases, such as for Lakes Owens and Manix, outcrop and core data synthesis yields stronger and more complete records; in other cases, such as for Bonneville and Lahontan, conflicts point toward reconsideration of confounding factors in interpretation of core-based proxies.

Great Basin↗
USGS2024

Limited preservation of strike-slip surface displacement in the geomorphic record

Offset geomorphic markers are commonly used to interpret slip history of strike-slip faults and have played an important role in forming earthquake recurrence models. These data sets are typically analyzed using cumulative probability methods to interpret average amounts of slip in past earthquakes. However, interpretation of the geomorphic record to infer surface slip history is complicated by slip variability, measurement uncertainty, and modification of offset features in the landscape. To investigate how well geomorphic data record surface slip, we use offset measurements from recent strike-slip surface ruptures ( n = 39), faults with geomorphic evidence of multiple strike-slip earthquakes ( n = 29), and synthetic slip distributions with added noise ( n > 10,000) to examine the constraints of the geomorphic record and the underlying assumptions of the cumulative offset probability distribution analysis method. We find that the geomorphic record is unlikely to resolve more than two paleo-slip distributions, except in specific cases with low slip variability, high slip-per-event, and semiarid climate. In cases where site-specific conditions allow for interpretation of more than two earthquakes, lateral extrapolation along a fault is not straightforward because on-fault displacement and distributed deformation may be spatially variable in each earthquake. We also find that average slip in modern earthquakes is adequately recovered by probability methods, but the reported prevalence of strike-slip faults with characteristic slip history is not supported by geomorphic data. We also propose updated methods to interpret slip history and construct uncertainty bounds for paleo-slip distributions.

Journal of Geophysical Research: Solid Earth↗
USGS2010

Geophysical studies of the West Antarctic rift system

The West Antarctic rift system extends over a 3000 × 750 km, largely ice covered area from the Ross Sea to the base of the Antarctic Peninsula, comparable in area to the Basin and Range and the East African rift system. A spectacular rift shoulder scarp along which peaks reach 4–5 km maximum elevation marks one flank and extends from northern Victoria Land-Queen Maud Mountains to the Ellsworth-Whitmore-Horlick Mountains. The rift shoulder has maximum present physiographic relief of 5 km in the Ross Embayment and 7 km in the Ellsworth Mountains-Byrd Subglacial Basin area. The Transantarctic Mountains part of the rift shoulder (and probably the entire shoulder) has been interpreted as rising since about 60 Ma, at episodic rates of ∼1 km/m.y., most recently since mid-Pliocene time, rather than continuously at the mean rate of 100 m/m.y. The rift system is characterized by bimodal alkaline volcanic rocks ranging from at least Oligocene to the present. These are exposed asymmetrically along the rift flanks and at the south end of the Antarctic Peninsula. The trend of the Jurassic tholeiites (Ferrar dolerites, Kirkpatric basalts) marking the Jurassic Transantarctic rift is coincident with exposures of the late Cenozoic volcanic rocks along the section of the Transantarctic Mountains from northern Victoria Land to the Horlick Mountains. The Cenozoic rift shoulder diverges here from the Jurassic tholeiite trend, and the tholeiites are exposed continuously (including the Dufek intrusion) along the lower- elevation (1–2 km) section of Transantarctic Mountains to the Weddell Sea. Widely spaced aeromagnetic profiles in West Antarctica indicate the absence of Cenozoic volcanic rocks in the ice covered part of the Whitmore-Ellsworth-Mountain block and suggest their widespread occurrence beneath the western part of the ice sheet overlying the Byrd Subglacial Basin. A German Federal Institute for Geosciences and Natural Resources (BGR)-U.S. Geological Survey (USGS) aeromagnetic survey over the Ross Sea continental shelf indicates rift fabric and suggests numerous submarine volcanoes along discrete NNW trending zones. A Bouguer anomaly range of approximately 200 (+50 to −150) mGal having 4–7 mGal/km gradients where measured in places marks the rift shoulder from northern Victoria Land possibly to the Ellsworth Mountains (where data are too sparse to determine maximum amplitude and gradient). The steepest gravity gradients across the rift shoulder require high density (mafic or ultramafic?) rock within the crust as well as at least 12 km of thinner crust beneath the West Antarctic rift system in contrast to East Antarctica. Sparse land seismic data reported along the rift shoulder, where velocities are greater than 7 km/s, and marine data indicating velocities above 7 km/s beneath the Ross Sea continental shelf support this interpretation. The maximum Bouguer gravity range in the Pensacola Mountains area of the Transantarctic Mountains is only about 130 mGal with a maximum 2 mGal/km gradient, which can be explained solely by 8 km of crustal thickening. Large offset seismic profiles over the Ross Sea shelf collected by the German Antarctic North Victoria Land Expedition V (GANOVEX V) combined with earlier USGS and other results indicate 17–21 km thickness for the crust beneath the Ross Sea shelf which we interpret as evidence of extended rifted continental crust. A regional positive Bouguer anomaly (0 to +50 mGal), the width of the rift, extends from the Ross Sea continental shelf throughout the Ross Embayment and Byrd Subglacial Basin area of the West Antarctic rift system and indicates that the Moho is approximately 20 km deep tied to the seismic results (probably coincident with the top of the asthenosphere) rather than the 30 km reported in earlier interpretations. The interpretation of horst and graben structures in the Ross Sea, made from marine seismic reflection data, probably can be extended throughout the rift (i.e., the Ross Ice shelf and the Byrd Subglacial Basin areas). The near absence of earthquakes in the West Antarctic rift system probably results from a combination of primarily sparse seismograph coverage and, secondarily, suppression of earthquakes by the ice sheet (e.g., Johnston, 1987) and very high seismicity shortly after deglaciation in the Ross Embayment followed by abnormally low seismicity at present (e.g., Muir Wood, 1989). The evidence of high temperatures at shallow depth beneath the Ross Sea continental shelf and adjacent Transantarctic Mountains is supportive of thermal uplift of the mountains associated with lateral heat conduction from the rift and can possibly also explain the volcanism, rifting, and high elevation of the entire rift shoulder to the Ellsworth-Horlick-Whitmore Mountains. We infer that the Gondwana breakup and the West Antarctic rift are part of a continuously propagating rift that started in the Jurassic when Africa separated from East Antarctica (including the failed Jurassic Transantarctic rift). Rifting proceeded clockwise around East Antarctica to the separation of New Zealand and the Campbell Plateau about 85–95 Ma and has continued (with a spreading center jump) to its present location in the Ross Embayment and West Antarctica. The Cenozoic activity of the West Antarctic rift system appears to be continuous in time with rifting in the same area that began only in the late Mesozoic. Although the mechanism for rifting is not completely explained, we suggest a combination of the flexural rigidity model (Stem and ten Brink, 1989) proposed for the Ross Embayment and the thermal plume or hot spot concepts. The propagating rift may have been “captured” by the thermal plume.

Tectonics↗
USGS1996

Paleomagnetic study of the northern Ford Ranges, western Marie Byrd Land, West Antarctica: Motion between West and East Antarctica

A paleomagnetic study of Paleozoic and Mesozoic crystalline rocks in the northern Ford Ranges of Marie Byrd Land, West Antarctica, has determined a middle Cretaceous (circa 100 Ma) paleomagnetic pole and provided constraints on possible clockwise rotation of these ranges and on the rifting of east Gondwana. The 40 Ar/ 39 Ar thermochronology data from the Fosdick Mountains record a period of rapid cooling from ∼700°C beginning at ∼100 Ma. We relate this to extension, intrusion, and uplift associated with the beginning of rifting between Campbell Plateau and Marie Byrd Land. All rocks from the Fosdick and Chester Mountains are normally polarized. We interpret thermochronology and paleomagnetic data to infer that the region was extensively remagnetized in middle Cretaceous time. Inclinations in samples from the Chester Mountains are less steep than those from the Fosdick Mountains, which we interpret as ∼25° of south tilting of the Chesters. We interpret cooling age data for the time of magnetization to infer that the tilting began after 105 Ma and ended prior to 103 Ma. We further interpret this as constraining the beginning of extension between the Campbell Plateau and western Marie Byrd Land to the interval 105 to 103 Ma. Virtual geomagnetic poles from samples of Early Carboniferous age granodiorite from the western Phillips Mountains lie on the late Paleozoic apparent polar wander path for Australia transferred to Antarctica. Directions from 29 sites in the central and eastern Phillips and Fosdick Mountains give a Middle Cretaceous paleomagnetic pole at 222.3° E, 70.5° S (A95 6.1°, KAPPA 20.0). This pole is indistinguishable from other Middle Cretaceous poles for studies further east in Marie Byrd Land. Combining middle Cretaceous poles determined for three other studies of the Antarctic Peninsula, Thurston Island, and the Ruppert-Hobbs coasts with ours gives a Pacific West Antarctic pole at 215.2° E, 73.5° S (A95 4.0°, KAPPA 528.9). This pole is discordant by 5° to 10° from synthetic mid-Cretaceous East Antarctic reference poles, but the degree of discordance is very sensitive to the choice of the specific reference pole. The lack of native East Antarctic reference poles leaves this analysis inconclusive. Accepting 10° of discordance, we favor an interpretation where Pacific West Antarctic crustal domains or microplates have rotated clockwise 40° to 90° and translated a few degrees away from East Antarctica during Late Cretaceous time.

Tectonics↗
USGS1996

Patterns of late Cenozoic volcanic and tectonic activity in the West Antarctic rift system revealed by aeromagnetic surveys

Aeromagnetic surveys, spaced ≤5 km, over widely separated areas of the largely ice- and sea-covered West Antarctic rift system, reveal similar patterns of 100- to 1700-nT, shallow-source magnetic anomalies interpreted as evidence of extensive late Cenozoic volcanism. We use the aeromagnetic data to extend the volcanic rift interpretation over West Antarctica starting with anomalies over (1) exposures of highly magnetic, late Cenozoic volcanic rocks several kilometers thick in the McMurdo-Ross Island area and elsewhere; continuing through (2) volcanoes and subvolcanic intrusions directly beneath the Ross Sea continental shelf defined by marine magnetic and seismic reflection data and aeromagnetic data and (3) volcanic structures interpreted beneath the Ross Ice Shelf partly controlled by seismic reflection determinations of seafloor depth to (4) an area of similar magnetic pattern over the West Antarctic Ice Sheet (400 km from the nearest exposed volcanic rock), where interpretations of late Cenozoic volcanic rocks at the base of the ice are controlled in part by radar ice sounding. North trending magnetic rift fabric in the Ross Sea-Ross Ice Shelf and Corridor Aerogeophysics of the Southeast Ross Transect Zone (CASERTZ) areas, revealed by the aeromagnetic surveys, is probably a reactivation of older rift trends (late Mesozoic?) and is superimposed on still older crosscutting structural trends revealed by magnetic terrace maps calculated from horizontal gradient of pseudogravity. Long-wavelength (∼ 100-km wide) magnetic terraces from sources within the subvolcanic basement cross the detailed survey areas. One of these extends across the Ross Sea survey from the front of the Transantarctic Mountains with an east-southeast trend crossing the north trending rift fabric. The Ross Sea-Ross Ice Shelf survey area is characterized by highly magnetic northern and southern zones which are separated by magnetically defined faults from a more moderately magnetic central zone. Aeromagnetic data in the south delineate the Ross fault of unknown age. The extension of the southern Central Basin south of the Ross fault is associated with an 825-nT magnetic anomaly over the Ross Ice Shelf requiring inferred late Cenozoic volcanic rock essentially at the seafloor at its south end, as shown by magnetic models. Models show that the thickness of magnetic volcanic rocks beneath Hut Point Peninsula at McMurdo Station is probably <2 km. The detailed surveys, combined with data from > 100,000 km of widely spaced aeromagnetic profiles, led to the interpretation of the mostly subglacial West Antarctic flood basalts(?) or their subglacially erupted and intruded equivalent. The volume of the exposed volcanos is small in contrast to the much greater volume (> 10 6 km³) of late Cenozoic magmatic rock remaining at volcanic centers beneath the continental shelf, Ross Ice Shelf and West Antarctic Ice Sheet. We suggest as an alternative or supplemental explanation to the previously proposed mantle plume hypothesis for the late Cenozoic volcanism significantly greater lower lithosphere (mantle) stretching resulting in greater decompression melting than the limited Cenozoic crustal extension allows. However, this implies a space problem that is not obviously resolved, because the Antarctic Plate is essentially surrounded by spreading centers.

Tectonics↗
USGS2018

Enhancement and integration of airborne gamma-ray spectrometric and Landsat imagery for regolith mapping — Cape York Peninsula

Airborne gamma-ray spectrometric data (400-m line spacing), gathered for the National Geoscience Mapping Accord North Queensland Project, has proved invaluable for differentiating regolith types based on their potassium, thorium and uranium signatures. The ability of the gamma-ray signal to penetrate the vegetation cover and as much as 40 cm below the surface was a considerable advantage in North Queensland, where traditional mapping techniques are hindered by the thick vegetation cover and where deeply weathered sandy soils frequently mask underlying geology. Two image-processing techniques were used to enhance the gamma-ray data and integrate them with Landsat Thematic Mapper (TM) data. Firstly, a sun-angle illuminated high-pass filtered component (hillshade) of the gamma-ray image was added to a three-band false-colour composite image of the corrected gamma-ray data. The hillshade component highlighted local changes in the gamma-ray signal which related to changes in regolith materials and lithology, and sharpened boundaries associated with geomorphic features. Secondly, the gamma-ray image was integrated (pixel by pixel) with the high-frequency component of the corresponding TM band 5 scene. This allowed the imagery to be interpreted in a geomorphological and structural context. Broad lithological divisions and structural domains were identified in the imagery, but most of the variation within these groups relates to the regolith cover and to geomorphic features in the landscape. Subtle variations in lithology were effectively interpreted only when the responses of the regolith cover are known. The gamma-ray imagery provided an insight into the weathering and geomorphic history of the region. In addition, the imagery can also be interpreted as a ‘geomorphic activity map’, separating stable landforms with deep weathering from younger landforms with active erosion and stripping of the surficial cover. This allows past and present geomorphic processes to be interpreted from the imagery, which in turn provides more informed extrapolation of field results and prediction of regolith types. The imagery was highly useful for basement and regolith mapping. There is considerable potential for assisting with interpretation of both stream-sediment geochemical data and environmental studies, since the resulting imagery effectively maps the distribution of sediments in the landscape, and identifies areas of erosion and land degradation.

Queensland↗