USGS ScienceSearch

USGS · 70243235

Enhancement and integration of airborne gamma-ray spectrometric and Landsat imagery for regolith mapping — Cape York Peninsula

Abstract

Airborne gamma-ray spectrometric data (400-m line spacing), gathered for the National Geoscience Mapping Accord North Queensland Project, has proved invaluable for differentiating regolith types based on their potassium, thorium and uranium signatures. The ability of the gamma-ray signal to penetrate the vegetation cover and as much as 40 cm below the surface was a considerable advantage in North Queensland, where traditional mapping techniques are hindered by the thick vegetation cover and where deeply weathered sandy soils frequently mask underlying geology. Two image-processing techniques were used to enhance the gamma-ray data and integrate them with Landsat Thematic Mapper (TM) data. Firstly, a sun-angle illuminated high-pass filtered component (hillshade) of the gamma-ray image was added to a three-band false-colour composite image of the corrected gamma-ray data. The hillshade component highlighted local changes in the gamma-ray signal which related to changes in regolith materials and lithology, and sharpened boundaries associated with geomorphic features. Secondly, the gamma-ray image was integrated (pixel by pixel) with the high-frequency component of the corresponding TM band 5 scene. This allowed the imagery to be interpreted in a geomorphological and structural context. Broad lithological divisions and structural domains were identified in the imagery, but most of the variation within these groups relates to the regolith cover and to geomorphic features in the landscape. Subtle variations in lithology were effectively interpreted only when the responses of the regolith cover are known. The gamma-ray imagery provided an insight into the weathering and geomorphic history of the region. In addition, the imagery can also be interpreted as a ‘geomorphic activity map’, separating stable landforms with deep weathering from younger landforms with active erosion and stripping of the surficial cover. This allows past and present geomorphic processes to be interpreted from the imagery, which in turn provides more informed extrapolation of field results and prediction of regolith types. The imagery was highly useful for basement and regolith mapping. There is considerable potential for assisting with interpretation of both stream-sediment geochemical data and environmental studies, since the resulting imagery effectively maps the distribution of sediments in the landscape, and identifies areas of erosion and land degradation.

Explore related subjects

90° N90° S · 180° W ← longitude → 180° E
Source-reported bounding extent: -18.62129837815519° to -9.951792414381273° latitude; 140.16394788242775° to 146.3397927476505° longitude. This indicates report coverage, not an exact sampling location. View area on OpenStreetMap.

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J. R. Wilford, C. F. Pain, J. C. Dohrenwend. 2018-12-06. Enhancement and integration of airborne gamma-ray spectrometric and Landsat imagery for regolith mapping — Cape York Peninsula. https://doi.org/10.1071/eg992441

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Electromagnetic and magnetic imaging of the Stillwater Complex, Montana, USA

Modelling and analysis of helicopter electromagnetic data result in resistivity and susceptibility models and derivatives of magnetic data that characterise shallow parts of the Stillwater Complex, critical for aiding exploration and expansion of globally scarce critical and battery mineral resources that include platinum group elements, nickel, copper and chromium. The magnetic susceptibly models derived from the electromagnetic data and the tilt derivative of the magnetic data image layering, mafic dikes, banded iron formation, and serpentinised peridotite. Known areas with contact-type mineralisation are generally characterised by low resistivities and susceptibilities where the volume of mineralised rock is large and/or the depth is shallow. We use iso-cluster and edge detection analysis of both resistivities and susceptibilities to identify potential mineralisation in poorly characterised regions as well as faults. Low resistivity layers beneath large landslides reflect water saturated porous slip surfaces which can interfere with drilling. This uncommon approach of tightly linking the resistivity and susceptibility models and magnetic anomaly data to rock property, surficial geologic, drill hole and soil geochemistry data to image the geology in the upper ∼100 m, aids identification of prospective mineralised regions as well landslides and faults that can impact mineral exploration and local hazards.

Montana

Using high-resolution aeromagnetic surveys to map subsurface hydrogeology in sediment-filled basins: A case study over the Rio Grande Rift, Central New Mexico, USA

High-resolution aeromagnetic surveys were acquired for the Albuquerque basin in the central Rio Grande rift, a basin filled with poorly consolidated sediments. The surveys proved successful in efficiently and economically mapping previously unknown hydrogeologic features of the shallow subsurface. This success suggests that aeromagnetic methods may be useful in hydrogeologic studies of other sediment-filled basins. The aeromagnetic surveys were used primarily to delineate buried igneous rocks and to locate faults within the basin fill, both important for understanding the subsurface hydrogeology. Buried igneous rocks were recognized from their high-frequency, high-amplitude magnetic responses and characteristic map patterns. The horizontal-gradient and local wavenumber methods were used to obtain estimates of their source depths. The aeromagnetic surveys were also successfully used to locate faults within the basin fill. Magnetic signatures associated with faults are produced by the juxtaposition of sediments having differing magnetic properties rather than the products of secondary processes. Expression of faults is abundant throughout the basin, revealing patterns that cannot be mapped at the surface due to widespread cover. A fault signature recognized in the high-resolution data that has multiple inflection points is best explained by a fault with a thin magnetic layer on the upthrown block and thick magnetic layer on the downthrown block, called the thin-thick layers model. Geologically, this signature indicates erosion of the upthrown block or a growth-faulting scenario: fault-controlled sedimentation for faults that offset sediments, and successive accumulation of basalt on the downthrown block for faults that offset volcanic rocks.

New Mexico

Inversion of data from electrical resistivity imaging surveys in water-covered areas

Electrical resistivity imaging surveys widely used in many environmental and engineering studies have also been conducted in water-covered areas. Surveys in water-covered areas include conventional surveys using multi-electrode resistivity systems where part of the survey line crosses a river or stream, and surveys conducted entirely within a water-covered environment. Surveys that are located entirely within a water-covered environment utilise electrodes mounted on a streamer, towed behind a boat. The streamer can be dragged along the water bottom, or float on the water surface. In this paper, the smoothness-constrained least-squares inversion method commonly used to interpret electrical resistivity imaging data from land surveys is adapted for underwater surveys. To accommodate the water bottom topography, a distorted finite-element grid is used to calculate the apparent resistivity values for the inversion model. The first few rows of elements are used to model the water layer, while the lower part of the grid is used for the sub-bottom resistivity distribution. For robust inversion, the water column resistivity and geometry must be known accurately as a large proportion of the current flows through the water layer. The section of the Earth below the bottom surface is subdivided into a large number of rectangular cells. The water column resistivity and geometry in the earth model is fixed, and the inversion program attempts to determine the resistivity of the cells that would most accurately reproduce the observed resistivity measurements. Implementation of water column resistivity and geometric constraints is demonstrated using numerical simulations and field data. Examples of electrical resistivity imaging surveys conducted on and across water bodies including rivers and near-shore marine environments are shown.

Exploration Geophysics