SEARCH · USGS Science

Results for “Research Square”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources

USGS2008

Bedrock Geologic Map of the Greater Lefkosia Area, Cyprus

The island of Cyprus has a long historical record of earthquakes that have damaged pre-Roman to modern human settlements. Because the recurrent damaging earthquakes can have a significant economic and social impact on Cyprus, this project was initiated to develop a seismic-hazard assessment for a roughly 400 square kilometer area centered on Cyprus' capital and largest city, whose European name is Nicosia and whose local name is Lefkosia. In addition, geologic and seismotectonic evaluations for the project extended beyond the perimeter of the geologic map. Additional structural, stratigraphic, and paleontological data were collected island-wide as well as data from literature research throughout the eastern Mediterranean region, in order to accurately place the geology and seismic hazards of the Lefkosia area in a regional tectonic framework.

Scientific Investigations Map↗

USGS2005

Geochemistry and characteristics of nitrogen transport at a confined animal feeding operation in a coastal plain agricultural watershed, and implications for nutrient loading in the Neuse River basin, North Carolina, 1999-2002

Chemical, geologic, hydrologic, and age-dating information collected between 1999 and 2002 were used to examine the transport of contaminants, primarily nitrogen, in ground water and the pathways to surface water in a coastal plain setting in North Carolina. Data were collected from more than 35 wells and 4 surface-water sampling sites located in a 0.59 square-mile basin to examine detailed hydrogeology and geochemical processes affecting nutrient fate and transport. Two additional surface-water sampling sites were located downstream from the primary study site to evaluate basin-scale effects. Chemical and flow data also were collected at an additional 10 sites in the Coastal Plain portion of the Neuse River basin located between Kinston and New Bern, North Carolina, to evaluate loads transported in the Neuse River and primary tributary basins. At the Lizzie Research Station study site in North Carolina, horizontal flow is induced by the presence of a confining unit at shallow depth. Age-dating, chemical, and piezometric data indicate that horizontal flow from the surficial aquifer is the dominant source of ground water to streamflow. Nitrogen applied on cultivated fields at the Lizzie Research Station is substantially reduced as it moves from recharge to discharge areas. Denitrification in deeper parts of the aquifer and in riparian zones is indicated by a characterization of redox conditions in the aquifer and by the presence of excess nitrogen gas. Direct ground-water discharge of nitrate to surface water during base-flow conditions is unlikely to be significant because of strongly reducing conditions that occur in the riparian zones of these streams. Nitrate loads from a drainage tile at the study site may account for much of the nitrate load in the receiving stream, indicating that a major source of nutrients from ground water to this stream is artificial drainage. During base-flow conditions when the streams are not flowing, it is hypothesized that the mineralization of organic matter on the streambed is the source of nitrate and(or) ammonium in the stream. Base flow is a small contributor to nitrogen loads, because both flows and inorganic nitrogen concentrations are low during summer months. Effects of a confined hog operation on ground-water quality also were evaluated. The use of sprayed swine wastes to fertilize crops at the Lizzie Research Station study site since 1995 resulted in increased concentrations of nitrate and other chemical constituents in ground water beneath spray fields when compared to ground water beneath fields treated with commercial fertilizer. The nitrate concentration in ground water from the spray field well increased by a factor of 3.5 after 4 years of spray applications. Nitrate concentrations ranged from 10 to 35 milligrams per liter, and one concentration as high as 56 milligrams per liter was observed in water from this well in spring 2002. This finding is in agreement with findings of other studies conducted in the Coastal Plain of North Carolina that nitrate concentrations were significantly higher in ground water from cultivated fields sprayed with swine wastes than from fields treated with commercial fertilizer. Loads and yields of nitrogen and phosphorus in 14 streams in the Neuse River basin were evaluated for calendar years 2000 and 2001. Data indicate that anthropogenic effects on nitrogen yields were greatest in the first-order stream studied (yields were greater than 2 tons per square mile [ton/mi2] and 1 ton/mi2 or less in second- and higher-order streams) in the Little Contentnea Creek subbasin. Nitrogen yields in streams in the Contentnea Creek subbasin ranged from 0.59 to 2 ton/mi2 with typical yields of approximately 1 ton/mi2. Contentnea Creek near Evansdale had the highest yield (2 ton/mi2), indicating that a major source of nitrogen is upstream from this station. Nitrogen yields were lower at Contentnea Creek at Hookerton in 2000 and 2001 compared to previous yi

Scientific Investigations Report↗

USGS2014

Maps showing bathymetry and modern sediment thickness on the inner continental shelf offshore of Fire Island, New York, pre-Hurricane Sandy

The U.S. Geological Survey mapped approximately 336 square kilometers of the lower shoreface and inner continental shelf offshore of Fire Island, New York, in 2011 by using interferometric sonar and high-resolution chirp seismic-reflection systems. This report presents maps of bathymetry, acoustic backscatter, the coastal plain unconformity, the Holocene marine transgressive surface, and modern sediment thickness. These spatial data support research on the Quaternary evolution of the Fire Island coastal system and provide baseline information for research on coastal processes along southern Long Island.

New York↗

USGS2005

Delineation of surf scoter habitat in Chesapeake Bay, Maryland: macrobenthic and sediment composition of surf scoter feeding sites

Surveys of surf scoters (Melanitta perspicillata) along the Atlantic coast of the United States have shown population declines in recent decades. The Chesapeake Bay has traditionally been a key wintering area for surf scoters. Past and present research has shown that bivalves constitute a major food item for seaducks in the Chesapeake Bay, with surf scoters feeding primarily on hooked mussel (Ischadium recurvum) and dwarf surf clam (Mulinia lateralis). Degraded water quality conditions in the Chesapeake Bay have been well documented and have been shown to greatly influence the composition of benthic communities. Large concentrations of feeding surf scoters (>500 individuals) in the Bay were determined through monthly boat surveys. Locations consistently lacking surf scoters were also determined. Macrobenthos were seasonally sampled at 3 locations containing scoters and 3 locations without scoters. A 1 kilometer square grid was superimposed over each location using GIS and sampling sites within the square were randomly chosen. Benthos were sampled at each site using SCUBA and a meter square quadrat. Biomass and size class estimates were determined for all bivalves within each kilometer square. Results indicated that scoter feeding sites contained significantly greater biomass of M. lateralis, I. recurvum, and Gemma gemma than locations where no scoters were present. Substrate differences were also detected, with scoter feeding sites being composed of a sand/shell mix while non-scoter sites consisted primarily of mud. This data indicates that surf scoters in the Chesapeake Bay are selecting areas with high densities of preferred food items, potentially maximizing there foraging energetics. In addition, two scoter feeding sites also contained a patchwork of eastern oyster (Crassostrea virginica) and oyster shell, on which much of the I. recurvum was attached. This suggests the possibility that surf scoters utilize eastern oyster habitat and the dramatic depletion of oysters in the Bay could be a possible factor in surf scoter decline. More research is needed into the possible relationship between surf scoters and the eastern oyster.

Book chapter↗

USGS2018

Quantitative evaluation of vitrinite reflectance and atomic O/C in coal using Raman spectroscopy and multivariate analysis

Vitrinite reflectance (VRo) is a standard petrographic method for assessing thermal maturity (rank) of coal. The vitrinite reflectance technique, however, requires significant petrographic experience, can be time-consuming, and may be biased by analyst subjectivity. Correlations between coal rank and Raman spectral properties are a promising alternative that can supplant some of the limitations inherent in the VRo protocol. The traditional peak-fitting methodologies for quantifying metrics from Raman spectra, however, also suffer from analyst subjectivity that can affect correlations between analyte and spectral properties. This research combines high-throughput Raman spectroscopy with multivariate analysis (MVA) to create calibration models for the prediction of coal rank though VRo and atomic O/C ratio. MVA techniques eliminate the ambiguous subjectivity prevalent in peak-fitting methods by evaluating the full Raman spectrum, then identifying the integral vibrational modes for constructing accurate models. Partial least squares (PLS) regression models were developed using Raman spectra and VRo values (0.23–5.23%) for 68 geographically diverse coal samples. The calibration set was validated using one-half of the samples to rigorously assess the model’s predictive accuracy. The root mean standard error of prediction was 0.19 for the VRo model and 0.014 for the atomic O/C model. Both models exhibited linear correlations, with coefficients of determination ( R 2 ) for the validation set of 0.99 (VRo) and 0.93 (atomic O/C), despite the geographic and rank diversity of the samples. This study demonstrates the applicability and power of using PLS models for the prediction of both the VRo and atomic O/C ratio from Raman spectra. The quantitative MVA protocol contained herein provides a Raman alternative to the VRo industry benchmark for coal rank that is not subject to the limitations and subjectivity of peak-fitting methods.

Fuel↗

USGS2025

Deterministic physics-based earthquake sequence simulators match empirical ground-motion models and enable extrapolation to data poor regimes: Application to multifault multimechanism ruptures

We use the deterministic earthquake simulator RSQSim to generate complex sequences of ruptures on fault systems used for hazard assessment. We show that the source motions combined with a wave propagation code create surface ground motions that fall within the range of epistemic uncertainties for the Next Generation Attenuation‐West2 set of empirical models. We show the model is well calibrated where there are good data constraints, and has good correspondence in regions with fewer data constraints. We show magnitude, distance, and mechanism dependence all arising naturally from the same underlying friction. The deterministic physics‐based approach provides an opportunity for better understanding the physical origins of ground motions. For example, we find that reduced stress drops in shallow layers relative to constant stress drop with depth lead to peak ground velocities in the near field that better match empirical models. The simulators may also provide better extrapolations into regimes that are poorly empirically constrained by data because physics, rather than surface shaking data parameterizations, is underlying the extrapolations. Having shown the model is credible, we apply it to a problem where observations are lacking. We examine the case of crustal faults above a shallow subduction interface seen to break coseismically in simulations of the New Zealand fault system. These types of events were left out of consideration in the most recent New Zealand national seismic hazard model due to the modeling complexity and lack of observational data to constrain ground‐motion models (GMMs). Here, we show that in the model, by breaking up the coseismic crustal and interface rupturing fault motions into two separate subevents, and then recombining the resulting ground‐motion measures in a square‐root‐of‐sum‐of‐squares incoherent manner, we reproduce well the ground‐motion measures from the full event rupture. This provides a new method for extrapolating GMMs to more complex multifault ruptures.

Seismological Research Letters↗

USGS2005

Marine mineral resources of Pacific Islands— A review of the Exclusive Economic Zones of islands of U.S. affiliation, excluding the State of Hawaii

The United States Exclusive Economic Zone (EEZ) was established in 1983 and comprises all marine areas within 200 nautical miles (370 kilometers) of the nearest U.S. land. This vast area of 3.38 million square nautical miles (11.6 million square kilometers) is about 20 percent greater than the entire land area of the United States. The resource potential of the vast mineral deposits that occur within the U.S. EEZ is unknown, despite field studies that have taken place during the past 25 years. Since about 1975, information on marine mineral deposits has been obtained by numerous research cruises to the Pacific Ocean by the U.S. Geological Survey (USGS), the U.S. National Oceanic and Atmospheric Administration (NOAA), equivalent government agencies in Germany, Canada, France, Russia, Japan, China, South Korea, Australia, and New Zealand, and by academic researchers from all of these nations. Although most of the cruises by other nations explored areas outside the U.S. EEZ, information gained from those studies can aid in the evaluation of the mineral potential in the U.S. EEZ. However, the global effort remains inadequate to allow for the quantitative evaluation of mineral resources contained within the EEZ of nations or within international regions of the oceans.

Circular↗

USGS2014

National Oceanic and Atmospheric Administration hydrographic survey data used in a U.S. Geological Survey regional geologic framework study along the Delmarva Peninsula

The U.S. Geological Survey initiated a research effort in 2014 to define the geologic framework of the Delmarva Peninsula inner continental shelf, which included new data collection and assembly of relevant extant datasets. Between 2006 and 2011, Science Applications International Corporation, under contract to the National Oceanic and Atmospheric Administration National Ocean Service, carried out 23 hydrographic surveys covering more than 4,100 square kilometers of the continental shelf using Reson multibeam echosounders and Klein towed sidescan sonars to update nautical charts along the Delmarva Peninsula. Acoustic backscatter data from these instruments are valuable for characterizing aspects of shallow geologic framework, including seafloor geology, sediment transport pathways, and marine resources. The data cover an area that extends from the entrance of Delaware Bay, Delaware, south to Parramore Island, Virginia, in water depths of about 3 to 35 meters below mean lower low water. Data were collected along lines spaced 40 meters apart, resulting in 40 to 100 percent seafloor coverage for multibeam bathymetry. Processed bathymetric data within the Delmarva Peninsula study area are available through a National Ocean Service interactive map interface, but towed sidescan data products are limited, and multibeam backscatter data products have not been available in the past. The U.S. Geological Survey obtained raw Reson multibeam data files from Science Applications International Corporation and the National Oceanic and Atmospheric Administration for 20 hydrographic surveys and extracted backscatter data using the Fledermaus Geocoder Toolbox from Quality Positioning Service. The backscatter mosaics produced by the U.S. Geological Survey for the inner continental shelf of the Delmarva Peninsula using National Oceanic and Atmospheric Administration data increased regional geophysical surveying efficiency, collaboration among government agencies, and the area over which geologic data can be interpreted by the U.S. Geological Survey. This report describes the methods by which the backscatter data were extracted and processed and includes backscatter mosaics and interpolated bathymetric surfaces.

Delaware, Maryland, Virginia↗

USGS2011

A field test of attractant traps for invasive Burmese pythons (Python molurus bivittatus) in southern Florida

Context: Invasive Burmese pythons (Python molurus bivittatus) are established over thousands of square kilometres of southern Florida, USA, and consume a wide range of native vertebrates. Few tools are available to control the python population, and none of the available tools have been validated in the field to assess capture success as a proportion of pythons available to be captured. Aims: Our primary aim was to conduct a trap trial for capturing invasive pythons in an area east of Everglades National Park, where many pythons had been captured in previous years, to assess the efficacy of traps for population control. We also aimed to compare results of visual surveys with trap capture rates, to determine capture rates of non-target species, and to assess capture rates as a proportion of resident pythons in the study area. Methods: We conducted a medium-scale (6053 trap nights) experiment using two types of attractant traps baited with live rats in the Frog Pond area east of Everglades National Park. We also conducted standardised and opportunistic visual surveys in the trapping area. Following the trap trial, the area was disc harrowed to expose pythons and allow calculation of an index of the number of resident pythons. Key results: We captured three pythons and 69 individuals of various rodent, amphibian, and reptile species in traps. Eleven pythons were discovered during disc harrowing operations, as were large numbers of rodents. Conclusions: The trap trial captured a relatively small proportion of the pythons that appeared to be present in the study area, although previous research suggests that trap capture rates improve with additional testing of alternative trap designs. Potential negative impacts to non-target species were minimal. Low python capture rates may have been associated with extremely high local prey abundances during the trap experiment. Implications: Results of this trial illustrate many of the challenges in implementing and interpreting results from tests of control tools for large cryptic predators such as Burmese pythons.

Florida↗

USGS2019

POLARIS properties: 30-meter probabilistic maps of soil properties over the contiguous United States

Soils play a critical role in the cycling of water, energy, and carbon in the Earth system. Until recently, due primarily to a lack of soil property maps of a sufficiently high‐quality and spatial detail, a minor emphasis has been placed on providing high‐resolution measured soil parameter estimates for land surface models and hydrologic models. This study introduces Probabilistic Remapping of SSURGO (POLARIS) soil properties—a database of 30‐m probabilistic soil property maps over the contiguous United States (CONUS). The mapped variables over CONUS include soil texture, organic matter, pH, saturated hydraulic conductivity, Brooks‐Corey and Van Genuchten water retention curve parameters, bulk density, and saturated water content. POLARIS soil properties was assembled by (1) depth harmonizing and aggregating the pedons in the National Cooperative Soil Survey Soil Characterization Database and the components in Soil Survey Geographic Database into a database of 21,481 different soil series, each soil series having its own vertical profiles of different soil properties, (2) pruning the original POLARIS soil series maps using conventional soil maps to improve soil series prediction accuracy, and (3) merging the assembled soil series databases with the pruned POLARIS soil series maps to construct the soil property maps over CONUS. POLARIS soil properties includes 100‐bin histograms for each layer and variable per grid cell and a series of summary statistics at 30‐, 300‐, and 3,000‐m spatial resolution. Evaluation of POLARIS soil properties using in situ measurements shows an average R2 of 0.41, normalized root‐mean‐square error of 12%, and a normalized mean absolute error of 8.8%.

Water Resources Research↗

USGS2012

A tale of two land uses in the American West: rural residential growth and energy development

This paper describes a spatiotemporal land use map for a rural county in the western United States. Sublette County, Wyoming has undergone recent land use change in the form of heightened rural residential development on private land and increased energy development on both public and private land. In this study we integrate energy production data, population census data, ownership parcel data, and a series of Landsat Thematic Mapper and Enhanced Thematic Mapper scenes (over a 25-year period) to create a map that illustrates the changing landscape. Spatial change on the landscape is mapped at 30 square meters, congruent with a Landsat pixel. Sublette County has a wealth of wildlife and associated habitat which is affected by both types of growth. While we do not attempt to quantify the effect of disturbance on wildlife species, we believe our results can provide important baseline data that can be incorporated into land use planning and ecological-wildlife research at the landscape scale.

Journal of Maps↗

USGS2017

Effects of thermal variability on broadband seismometers: Controlled experiments, observations, and implications

Isolating seismic instruments from temperature fluctuations is routine practice within the seismological community. However, the necessary degree of thermal stability required in broadband installations to avoid generating noise or compromising the fidelity in the seismic records is largely unknown and likely application dependent. To quantify the temperature sensitivity of seismometers over a broad range of frequencies, we artificially induced local temperature changes on three different models of seismometers to measure the effect of thermal variations on seismometer output. We found that diurnal temperature changes above 0.002°C root mean square (rms) showed significant changes in velocity and acceleration output in comparison to thermally stable reference measurements. We also found that sensor incoherent self‐noise increased with temperature variation; these increases in noise can be modeled as 1 / f "> 1 / f noise (pink noise), and are unlikely to be easily corrected for. These experimental results are compared with the data from Incorporated Research Institutions for Seismology (IRIS) U.S. Geological Survey (USGS) Global Seismographic Network (GSN) station TUC (Tucson, Arizona). This station is well instrumented with temperature sensors and has three different broadband seismometers, each of which uses a different method of thermal isolation. We show that the water bricks and borehole installations give ample temperature attenuation to thermally isolate seismometers from diurnal thermal variability that would compromise seismic data. We find that seismometer installations that provide thermal stability below 0.002°C rms could help to improve long‐period vertical seismic data across the GSN by decreasing temperature‐driven 1 / f "> 1 / f noise.

Bulletin of the Seismological Society of America↗

USGS2023

Accuracy of finite fault slip estimates in subduction zone regions with topographic Green's functions and seafloor geodesy

Until recently, the lack of seafloor geodetic instrumentation and the use of unrealistically simple, half-space based forward models have resulted in poor resolution of near-trench slip in subduction zone settings. Here, we use a synthetic framework to investigate the impact of topography and geodetic data distribution on coseismic slip estimates in various subduction zone settings. We calculate surface displacements in two synthetic topographic domains that have topography similar to that of Chile and Japan, respectively. We then attempt to image target slip distributions by using a Bayesian approach to solve for slip with two sets of Green's functions—one that accounts for topography and one that does not—and five sets of 50 or more observation points selected from the synthetic surface displacements. Three of these sets of observation points are entirely onland, and two include 5–10 seafloor geodetic sites. We find that the use of topographic Green's functions always improves inferred slip models, and with seafloor geodetic data, it enables an almost perfect recovery of a target slip model, even in the near-trench region. Critically, our results demonstrate that it would be impossible for non-topographic Green's functions to properly recover the true slip distribution, particularly in the near-trench region. We also perform a parameter study with approximately 4,000 slip models estimated using a least-square approach, and find that topographic Green's functions yield significantly more accurate slip models in cases where good data (well distributed and reasonably dense) are available, even in the absence of seafloor geodetic sites.

Journal of Geophysical Research: Solid Earth↗

USGS2011

Sea-floor geology and topography offshore in Eastern Long Island Sound

A gridded multibeam bathymetric dataset covers approximately 133.7 square kilometers of sea floor offshore in eastern Long Island Sound. Although originally collected for charting purposes during National Oceanic and Atmospheric Administration hydrographic survey H11997, these acoustic data, and the sea-floor sampling and photography stations subsequently occupied to verify them during USGS cruise 2010-015-FA, are part of an expanding series of studies that provide a fundamental framework for research and resource management (for example, cables, pipelines, and dredging) activities in this major East Coast estuary. Results show the composition and terrain of the seabed and provide information on sediment transport and benthic habitat. Bedrock outcrops, erosional outliers, lag deposits of boulders, scour depressions, and extensive gravel pavements are common in the eastern part of the study area. These features, which result from the near-constant exposure to strong tidal currents, indicate sedimentary environments dominated by processes associated with erosion. Large fields of transverse and barchanoid sand waves in the western part of the study area reflect slightly lower energy levels and sedimentary environments where processes associated with coarse bedload transport prevail.

Open-File Report↗

USGS1977

Transverse mixing in the Mobile River, Alabama

Transverse dispersion in the Mobile River was measured by (1) ground-based techniques using water samples and a fluorometer and (2) by aerial photography. Magnitude of the transverse mixing coefficient obtained by the two methods was 6.2 feet squared per second (0.58 metre squared per second) and 5.0 feet squared per second (0.46 metre squared per second), respectively. The value of the numerical coefficient k , which relates the transverse mixing coefficient E , to shear velocity U * and average depth of flow, d , by the relationship k = E z / U * d , was 7.2.

Alabama↗

USGS2019

Assessing water quality from highway runoff at selected sites in North Carolina with the Stochastic Empirical Loading and Dilution Model (SELDM)

In 2015, the U.S. Geological Survey (USGS) entered into a cooperative agreement with the North Carolina Department of Transportation (NCDOT) to develop a North Carolina-enhanced variation of the national Stochastic Empirical Loading and Dilution Model (SELDM) with available North Carolina-specific streamflow and water-quality data and to demonstrate use of the model by documenting selected simulation scenarios. The USGS developed the national SELDM in cooperation with the Federal Highway Administration (FHWA) to provide the tools and techniques necessary for performing stormwater-quality simulations. SELDM uses a stochastic mass-balance approach to estimate combinations of flows, concentrations, and loads of stormwater constituents from the site of interest (often a highway catchment; nonhighway areas, such as a large impervious area at a shopping center complex, also can be used) and the basin upstream from the stormwater outfall to assess the risk for adverse effects of runoff. SELDM also can be used to simulate the effectiveness of volume reduction, hydrograph extension, and water-quality concentration reductions by stormwater best management practices (BMPs), which are designed to help mitigate the effects of runoff on receiving water bodies. Some of the statistical inputs needed for the North Carolina-enhanced SELDM were either calculated or augmented using local or regional data from North Carolina. Streamflow statistics used by SELDM were determined for 266 streamgages across North Carolina on the basis of data available through the 2015 water year. Recession ratio statistics used for triangular hydrographs were also developed for 30 streamgages across the State. The NCDOT identified previous research reports on highway-runoff and BMP studies in North Carolina for review of potential data addition to the national FHWA Highway-Runoff Database (HRDB). Following USGS review of these data, a total of 25,087 event mean concentration values and 1,140 storm events for 39 highway-runoff sites and 195 analytes were uploaded to the national HRDB from six North Carolina highway-runoff research reports and a recent USGS bridge deck runoff study. Using data for 27 streamgages in North Carolina, a total of 57 water-quality transport curves were developed for seven constituents for use in simulating water-quality conditions in the upstream basin. Performance data for three BMPs (bioretention, grass strip or swale, and wetland channel) from NCDOT research data were incorporated into the North Carolina-enhanced SELDM for volume-reduction statistics, including the effectiveness of treating four water-quality constituents (total suspended solids, total nitrogen, total phosphorus, nitrate plus nitrite) and turbidity. Simulations using the North Carolina-enhanced SELDM are presented for two hypothetical upstream basins in the Piedmont ecoregion and one hypothetical highway site to demonstrate how simulations can be used to provide risk-based information about potential effects of stormwater runoff on downstream water quality and the potential for mitigating those risks by using BMPs. The first group of simulations explores the stochastic variability in dilution factors (the ratio of the highway runoff to the total downstream stormflow) for a hypothetical Piedmont rural creek having drainage areas ranging from 1 to 100 square miles. The second group of simulations examines dilution factors based on variations in precipitation, streamflow, and recession ratios for two hypothetical Piedmont upstream basins (rural and urban) where the drainage area was held constant at 25 square miles. These simulations indicate the sensitivity of results to variations in each of the three variables. The third group of simulations examines the effects of varied concentrations in the upstream basin on water-quality conditions downstream from the highway crossing. Variations in upstream water-quality conditions for three constituents (suspended sediment concentration, total nitrogen, and total phosphorus) are based on water-quality transport curves selected from among the 57 curves developed as part of this study to represent low-, medium-, and high-concentration statistics. Simulations completed for this third group also examine the potential effects of grass swale and bioretention BMP treatment on total nitrogen and total phosphorus concentrations in highway runoff. The BMP performance data from the NCDOT research reports were applied in this group of simulations. The stochastic mass-balance approach used in SELDM analyses and simulations provides a strong tool for engineers and water-resource managers to use in exploring a wide range of possible hydrologic and water-quality inputs and their effects on downstream water quality. The results of this study can not only aid engineers and managers in planning for potential adverse effects of runoff at site-specific locations, they can also help the USGS and other Federal and State agencies with oversight responsibilities in stormwater-quality issues to continue gathering data on potential water-quality effects in receiving streams.

North Carolina↗

USGS1971

EROS — New observation vantage points and processes

The EROS Program objective is to utilize aircraft and spacecraft remote-sensing technology as complementary parts of integrated data collection, processing, and dissemination systems to support resources research and management functions of the Department of the Interior. The Program develops and coordinates research in the applications of new sensors for resources applications in cooperation with NASA. At present there are two major areas of activity: present there are two major areas of activity: The first is related to the Earth Resources Technology Satellite (ERTS). The second is a suite of projects designed to determine the applicability of new aerial and satellite sensing systems and techniques to geologic, geographic, hydrologic, and topographic mapping and for supporting natural resources management functions of the Department of the Interior. Programs with similar goals for agriculture and forestry, and for oceanography are being conducted in the Departments of Agriculture, Commerce, the Naval Oceanographic Office, and in a number of colleges and universities. The first satellite designed specifically for resources research and applications, ERTS-A, is to be launched in early 1972. It will be an unmanned satellite carrying three experimental systems: A three camera Return Beam Vidicon (RBV) system, a 4-band Multispectral Scanning (MSS) radiometer system, and a Data Collection System (DCS). The RBV cameras will photograph simultaneously and instantaneously areas of the earth 100 × 100 nautical miles - or 10,000 square nautical miles - in the blue-green (.475-.575mu m), the red (.580-.680mu m), and the near infrared (.690-.830mu m). The MSS will record three wavelength bands in the same general spectral range and the fourth band (8.0 mu m) will extend farther into the infrared...

Conference Paper↗

USGS2017

Coastal single-beam bathymetry data collected in 2015 from the Chandeleur Islands, Louisiana

As part of the Louisiana Coastal Protection and Restoration Authority (CPRA) Barrier Island Comprehensive Monitoring Program, scientists from the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted a single-beam bathymetry survey around the Chandeleur Islands, Louisiana, in June 2015. The goal of the program is to provide long-term data on Louisiana’s barrier islands and use this data to plan, design, evaluate, and maintain current and future barrier island restoration projects. The data described in this report, along with (1) USGS bathymetry data collected in 2013 as a part of the Barrier Island Evolution Research project covering the northern Chandeleur Islands, and (2) data collected in 2014 in collaboration with the Louisiana CPRA Barrier Island Comprehensive Monitoring Program around Breton Island, will be used to assess bathymetric change since 2006‒2007 as well as serve as a bathymetric control in supporting modeling of future changes in response to restoration and storm impacts. The survey area encompasses approximately 435 square kilometers of nearshore and back-barrier environments around Hewes Point, the Chandeleur Islands, and Curlew and Grand Gosier Shoals. This Data Series serves as an archive of processed single-beam bathymetry data, collected in the nearshore of the Chandeleur Islands, Louisiana, from June 17‒24, 2015, during USGS Field Activity Number 2015-317-FA. Geographic information system data products include a 200-meter-cell-size interpolated bathymetry grid, trackline maps, and xyz point data files. Additional files include error analysis maps, Field Activity Collection System logs, and formal Federal Geographic Data Committee metadata.

Louisiana↗