USGS Science⌕ Search

SEARCH · USGS Science

Results for “Journal of Maps”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49Linked to original sources

Inversion of multi-frequency electromagnetic induction data for 3D characterization of hydraulic conductivity

Electromagnetic induction (EMI) instruments provide rapid, noninvasive, and spatially dense data for characterization of soil and groundwater properties. Data from multi-frequency EMI tools can be inverted to provide quantitative electrical conductivity estimates as a function of depth. In this study, multi-frequency EMI data collected across an abandoned uranium mill site near Naturita, Colorado, USA, are inverted to produce vertical distribution of electrical conductivity ( EC ) across the site. The relation between measured apparent electrical conductivity ( EC a ) and hydraulic conductivity ( K ) is weak (correlation coefficient of 0.20), whereas the correlation between the depth dependent EC obtained from the inversions, and K is sufficiently strong to be used for hydrologic estimation (correlation coefficient of − 0.62). Depth-specific EC values were correlated with co-located K measurements to develop a site-specific ln( EC )–ln( K ) relation. This petrophysical relation was applied to produce a spatially detailed map of K across the study area. A synthetic example based on EC a values at the site was used to assess model resolution and correlation loss given variations in depth and/or measurement error. Results from synthetic modeling indicate that optimum correlation with K occurs at ~ 0.5 m followed by a gradual correlation loss of 90% at 2.3 m. These results are consistent with an analysis of depth of investigation (DOI) given the range of frequencies, transmitter–receiver separation, and measurement errors for the field data. DOIs were estimated at 2.0 ± 0.5 m depending on the soil conductivities. A 4-layer model, with varying thicknesses, was used to invert the EC a to maximize available information within the aquifer region for improved correlations with K . Results show improved correlation between K and the corresponding inverted EC at similar depths, underscoring the importance of inversion in using multi-frequency EMI data for hydrologic estimation.

Journal of Applied Geophysics↗

Geodetic evidence for en echelon dike emplacement and concurrent slow slip during the June 2007 intrusion and eruption at Kilauea volcano, Hawaii

A series of complex events at Kīlauea Volcano, Hawaii, 17 June to 19 June 2007, began with an intrusion in the upper east rift zone (ERZ) and culminated with a small eruption (1500 m 3 ). Surface deformation due to the intrusion was recorded in unprecedented detail by Global Positioning System (GPS) and tilt networks as well as interferometric synthetic aperture radar (InSAR) data acquired by the ENVISAT and ALOS satellites. A joint nonlinear inversion of GPS, tilt, and InSAR data yields a deflationary source beneath the summit caldera and an ENE-striking uniform-opening dislocation with ~2 m opening, a dip of ∼80° to the south, and extending from the surface to ~2 km depth. This simple model reasonably fits the overall pattern of deformation but significantly misfits data near the western end of an inferred dike-like source. Three more complex dike models are tested that allow for distributed opening including (1) a dike that follows the surface trace of the active rift zone, (2) a dike that follows the symmetry axis of InSAR deformation, and (3) two en echelon dike segments beneath mapped surface cracks and newly formed steaming areas. The en echelon dike model best fits near-field GPS and tilt data. Maximum opening of 2.4 m occurred on the eastern segment beneath the eruptive vent. Although this model represents the best fit to the ERZ data, it still fails to explain data from a coastal tiltmeter and GPS sites on Kīlauea's southwestern flank. The southwest flank GPS sites and the coastal tiltmeter exhibit deformation consistent with observations of previous slow slip events beneath Kīlauea's south flank, but inconsistent with observations of previous intrusions. Slow slip events at Kīlauea and elsewhere are thought to occur in a transition zone between locked and stably sliding zones of a fault. An inversion including slip on a basal decollement improves fit to these data and suggests a maximum of ~15 cm of seaward fault motion, comparable to previous slow-slip events.

Hawai'i↗

Modern aerial gamma-ray spectrometry and regional potassium map of the conterminous United States

Aerial gamma-ray surveys of the natural environment measure the flux of gamma rays produced by the radioactive decay of 40 K, 214 Bi, and 208 Tl in the upper 10–20 cm of surface materials. 40 K is a radioactive potassium isotope which can be used to estimate the total amount of potassium in the soils and rocks. 214 Bi is a decay product of the 238 U radioactive decay series and is used to estimate the uranium concentrations, and 208 Tl, a decay product of the 232 Th radioactive decay series, is used to estimate thorium concentrations. Aerial gamma-ray data covering the 48 contiguous states of the United States have been compiled to produce maps showing the distributions of equivalent uranium, equivalent thorium, and potassium. This compilation involved processing the aerial survey data from about 470 1° × 2° quadrangle maps. The aerial gamma-ray data were obtained as part of the National Uranium Resource Evaluation (NURE) Program sponsored by the U.S. Department of Energy during the period 1975-1983. References for the Open-File Reports that describe the surveys and data collection can be found in Bendix Field Engineering Corp. (1983). The aerial surveys were flown by contractors using fixed-wing and helicopter systems with 33-50 L (liters) of thallium-activated sodium iodide (NaI (TI)) crystals. The nominal survey altitude used is 122 m. The survey lines were generally east-west with line spacings of 1.6-10 km. Tie lines were flown perpendicular to the flight lines at intervals of 16- 30 km. The data were corrected for background from aircraft contamination and cosmic rays, altitude variations, airborne 214Bi, and Compton scattering. The gamma-ray systems were calibrated using the calibrations pads at Grand Junction, Colorado (Ward, 1978 ) and the dynamic test strip at Lake Mead, Arizona (Geodata International, Inc., 1977).

Journal of Geochemical Exploration↗

Maybe so, maybe not: Canis lepophagus at Hagerman Fossil Beds National Monument, Idaho, USA

A canid dentary is described from the Pliocene Glenns Ferry Formation at Hagerman Fossil Beds National Monument, south-central Idaho, USA. The specimen possesses traits in alliance with and measurements falling within or exceeding those of Canis lepophagus . The dentary, along with a tarsal IV (cuboid) and an exploded canine come from the base of the fossiliferous Sahara complex within the monument. Improved geochronologic control provided by new tephrochronologic mapping by the U.S. Geological Survey-National Park Service Hagerman Paleontology, Environments, and Tephrochronology Project supports an interpolated age of approximately 3.9 Ma, placing it in the early Blancan North American Land Mammal Age. It is conservatively referred to herein as Canis aff. C . lepophagus with the caveat that it is an early and robust example of that species. A smaller canid, initially assigned to Canis lepophagus and then to Canis ferox , is also known from Hagerman. Most specimens of Canis ferox , including the holotype, were recently reassigned to Eucyon ferox , but specimens from the Hagerman and Rexroad faunas were left as Canis sp. and possibly attributed to C . lepophagus. We agree that these smaller canids belong in Canis and not Eucyon but reject placing them within C . lepophagus ; we refer to them here as Hagerman-Rexroad Canis . This study confirms the presence of two approximately coyote-sized canids at Hagerman and adds to the growing list of carnivorans now known from these fossil beds.

Idaho↗

The rise and fall of water hyacinth in Lake Victoria and the Kagera River basin, 1989-2001

Water hyacinth (Eichhornia crassipes (Mart.) Solms) is an invasive aquatic macrophyte associated with major negative economic and ecological impacts to the Lake Victoria region since the plant's establishment in Uganda in the 1980s. Reliable estimates of water hyacinth distribution and extent are required to gauge the severity of the problem through time, relate water hyacinth abundance to environmental factors, identify areas requiring management action, and assess the efficacy of management actions. To provide such estimates and demonstrate the utility of remote sensing for this application, we processed and analyzed remotely sensed imagery to determine the distribution and extent of water hyacinth. Maps were produced and coverage was quantified using a hybrid unsupervised image classification approach with manual editing for each of the riparian countries of Kenya, Tanzania, and Uganda, as well as for numerous gulfs and bays. A similar procedure was carried out for selected lakes in the Rwanda-Tanzania borderlands lakes region in the Kagera River basin. Results confirm the severity of the water hyacinth infestation, especially in the northern parts of the lake. A maximum lake-wide extent of at least 17,374 ha was attained in 1998. Following this, a combination of factors, including conditions associated with the 1997 to 1998 El Nin??o and biocontrol with water hyacinth weevils, appear to have contributed to a major decline in water hyacinth in the most affected parts of the lake. Some lakes in the Kagera basin, such as Lake Mihindi, Rwanda, were severely infested in the late 1990s, but the level of infestation in most of these decreased markedly by the early 2000s.

Journal of Aquatic Plant Management↗

The Amphibian Research and Monitoring Initiative (ARMI): 5-year report

The Amphibian Research and Monitoring Initiative (ARMI) is an innovative, multidisciplinary program that began in 2000 in response to a congressional directive for the Department of the Interior to address the issue of amphibian declines in the United States. ARMI’s formulation was cross-disciplinary, integrating U.S. Geological Survey scientists from Biology, Water, and Geography to develop a course of action (Corn and others, 2005a). The result has been an effective program with diverse, yet complementary, expertise. ARMI’s approach to research and monitoring is multiscale. Detailed investigations focus on a few species at selected local sites throughout the country; monitoring addresses a larger number of species over broader areas (typically, National Parks and National Wildlife Refuges); and inventories to document species occurrence are conducted more extensively across the landscape. Where monitoring is conducted, the emphasis is on an ability to draw statistically defensible conclusions about the status of amphibians. To achieve this objective, ARMI has instituted a monitoring response variable that has nationwide applicability. At research sites, ARMI focuses on studying species/environment interactions, determining causes of observed declines, and developing new techniques to sample populations and analyze data. Results from activities at all scales are provided to scientists, land managers, and policymakers, as appropriate. The ARMI program and the scientists involved contribute significantly to understanding amphibian declines at local, regional, national, and international levels. Within National Parks and National Wildlife Refuges, findings help land managers make decisions applicable to amphibian conservation. For example, the National Park Service (NPS) selected amphibians as a vital sign for several of their monitoring networks, and ARMI scientists provide information and assistance in developing monitoring methods for this NPS effort. At the national level, ARMI has had major exposure at a variety of meetings, including a dedicated symposium at the 2004 joint meetings of the Herpetologists’ League, the American Society of Ichthyologists and Herpetologists, and the Society for the Study of Amphibians and Reptiles. Several principal investigators have brought international exposure to ARMI through venues such as the World Congress of Herpetology in South Africa in 2005 (invited presentation by Dr. Gary Fellers), the Global Amphibian Summit, sponsored by the International Union for Conservation of Nature (IUCN) and Wildlife Conservation International, in Washington, D.C., 2005 (invited participation by Dr. P.S. Corn), and a special issue of the international herpetological journal Alytes focused on ARMI in 2004 (edited by Dr. C.K. Dodd, Jr.). ARMI research and monitoring efforts have addressed at least 7 of the 21 Threatened and Endangered Species listed by the U.S. Fish and Wildlife Service (California red-legged frog [Rana draytonii], Chiricahua leopard frog [R. chiricahuensis], arroyo toad [Bufo californicus], dusky gopher frog [Rana sevosa], mountain yellow-legged frog [R. muscosa], flatwoods salamander [Ambystoma cingulatum], and the golden coqui [Eleutherodactylus jasperi]), and 9 additional species of concern recognized by the IUCN. ARMI investigations have addressed time-sensitive research, such as emerging infectious diseases and effects on amphibians related to natural disasters like wildfire, hurricanes, and debris flows, and the effects of more constant, environmental change, like urban expansion, road development, and the use of pesticides. Over the last 5 years, ARMI has partnered with an extensive list of government, academic, and private entities. These partnerships have been fruitful and have assisted ARMI in developing new field protocols and analytic tools, in using and refining emerging technologies to improve accuracy and efficiency of data handling, in conducting amphibian disease, malformation, and environmental effects research, and in implementing a network of monitoring and research sites. Accomplishments from these endeavors include more than 40 publications on amphibian status and trends, nearly 100 publications on amphibian ecology and causes of declines, and over 30 methodological publications. Several databases have emerged as a result of ARMI and its partnerships; one, a digital atlas of ranges for all U.S. amphibian species, was used by the IUCN to display amphibian distribution maps in the Global Amphibian Assessment Project. Given the scope of ARMI and the panoply of projects, findings have had implications for policy. Investigations that demonstrate amphibian declines or illuminate causes of declines provide valuable information about habitat management, environmental effects, mechanisms for the spread of disease, and human/amphibian interfaces. This information has been made available to land managers, scientists, educators, Congress and other policymakers, and the public. The support afforded ARMI by Congress has been influential in the program’s development and success. The value of ARMI’s efforts will continue to increase as we are able to extend our studies spatially and temporally to answer critical questions with more confidence. We are using ARMI’s resources efficiently and continuing to develop innovative mechanisms for leveraging resources for maximum effectiveness during challenging financial times. This report is a 5-year retrospective of the structure, methodology, progress, and contributions to the broader scientific community that have resulted from this national USGS program. We evaluate ARMI’s success to date, with regard to the challenges faced by the program and the strengths that have emerged. We chart objectives for the next 5 years that build on current accomplishments, highlight areas meriting further research, and direct efforts to overcome existing weaknesses.

Scientific Investigations Report↗

Riparian vegetation, Colorado River, and climate: five decades of spatiotemporal dynamics in the Grand Canyon with river regulation

Documentation of the interacting effects of river regulation and climate on riparian vegetation has typically been limited to small segments of rivers or focused on individual plant species. We examine spatiotemporal variability in riparian vegetation for the Colorado River in Grand Canyon relative to river regulation and climate, over the five decades since completion of the upstream Glen Canyon Dam in 1963. Long-term changes along this highly modified, large segment of the river provide insights for management of similar riparian ecosystems around the world. We analyze vegetation extent based on maps and imagery from eight dates between 1965 and 2009, coupled with the instantaneous hydrograph for the entire period. Analysis confirms a net increase in vegetated area since completion of the dam. Magnitude and timing of such vegetation changes are river stage-dependent. Vegetation expansion is coincident with inundation frequency changes and is unlikely to occur for time periods when inundation frequency exceeds approximately 5%. Vegetation expansion at lower zones of the riparian area is greater during the periods with lower peak and higher base flows, while vegetation at higher zones couples with precipitation patterns and decreases during drought. Short pulses of high flow, such as the controlled floods of the Colorado River in 1996, 2004, and 2008, do not keep vegetation from expanding onto bare sand habitat. Management intended to promote resilience of riparian vegetation must contend with communities that are sensitive to the interacting effects of altered flood regimes and water availability from river and precipitation.

Arizona↗

Electromagnetic methods for mapping freshwater lenses on Micronesian atoll islands

The overall shape of freshwater lenses can be determined by applying electromagnetic methods and inverse layered-earth modeling to the mapping of atoll island freshwater lenses. Conductivity profiles were run across the width of the inhabited islands at Mwoakilloa, Pingelap, and Sapwuahfik atolls of the Pohnpei State, Federated States of Micronesia using a dual-loop, frequency-domain, electromagnetic profiling system. Six values of apparent conductivity were recorded at each sounding station and were used to interpret layer conductivities and/or thicknesses. A three-layer model that includes the unsaturated, freshwater, and saltwater zones was used to simulate apparent-conductivity data measured in the field. Interpreted results were compared with chloride-concentration data from monitoring wells and indicate that the interface between freshwater and saltwater layers, defined from electromagnetic data, is located in the upper part of the transition zone, where the chloride-concentration profile shows a rapid increase with depth. The electromagnetic method can be used to interpret the thickness of the freshwater between monitoring wells, but can not be used to interpret the thickness of freshwater from monitoring wells to the margin of an island.

Journal of Hydrology↗

Historical reconstructions of California wildfires vary by data source

Historical data are essential for understanding how fire activity responds to different drivers. It is important that the source of data is commensurate with the spatial and temporal scale of the question addressed, but fire history databases are derived from different sources with different restrictions. In California, a frequently used fire history dataset is the State of California Fire and Resource Assessment Program (FRAP) fire history database, which circumscribes fire perimeters at a relatively fine scale. It includes large fires on both state and federal lands but only covers fires that were mapped or had other spatially explicit data. A different database is the state and federal governments’ annual reports of all fires. They are more complete than the FRAP database but are only spatially explicit to the level of county (California Department of Forestry and Fire Protection – Cal Fire) or forest (United States Forest Service – USFS). We found substantial differences between the FRAP database and the annual summaries, with the largest and most consistent discrepancy being in fire frequency. The FRAP database missed the majority of fires and is thus a poor indicator of fire frequency or indicators of ignition sources. The FRAP database is also deficient in area burned, especially before 1950. Even in contemporary records, the huge number of smaller fires not included in the FRAP database account for substantial cumulative differences in area burned. Wildfires in California account for nearly half of the western United States fire suppression budget. Therefore, the conclusions about data discrepancies and the implications for fire research are of broad importance.

California↗

Field calibration and validation of remote-sensing surveys

The Optical Collection Suite (OCS) is a ground-truth sampling system designed to perform in situ measurements that help calibrate and validate optical remote-sensing and swath-sonar surveys for mapping and monitoring coastal ecosystems and ocean planning. The OCS system enables researchers to collect underwater imagery with real-time feedback, measure the spectral response, and quantify the water clarity with simple and relatively inexpensive instruments that can be hand-deployed from a small vessel. This article reviews the design and performance of the system, based on operational and logistical considerations, as well as the data requirements to support a number of coastal science and management projects. The OCS system has been operational since 2009 and has been used in several ground-truth missions that overlapped with airborne lidar bathymetry (ALB), hyperspectral imagery (HSI), and swath-sonar bathymetric surveys in the Gulf of Maine, southwest Alaska, and the US Virgin Islands (USVI). Research projects that have used the system include a comparison of backscatter intensity derived from acoustic (multibeam/interferometric sonars) versus active optical (ALB) sensors, ALB bottom detection, and seafloor characterization using HSI and ALB.

Alaska↗

Mapping first to final uses for rare earth elements, globally and in the United States

Estimating the material flows of rare earth elements (REEs) is essential to understanding which industries are most vulnerable to potential REE supply disruptions which, in turn, may inform policy recommendations aimed at reducing the supply risk. However, the REEs are a group of mineral commodities characterized by highly uncertain estimates of supply and demand due to the REE market's complexity, opacity, and small size. In this study, a streamlined methodology was applied to map mineral commodity first-use to final-use applications and to estimate total requirements at the national level based on available industrial data for final-use finished goods. This analysis examines REEs both as a group and individually, showing that total US requirements are between 15% and 16.5% of world requirements for the year 2015, the latest year with the most complete information available. The findings shed light on US industrial capabilities by revealing the discrepancy between the types of REEs that go into US raw material consumption and those that are contained in embedded consumption. For instance, given the United States’ large oil refining industry, US raw material consumption of lanthanum is quite high. In contrast, US raw material consumption of neodymium is relatively low, whereas embedded demand is comparatively high. This reflects the lack of industrial capacity to process REE concentrates into magnet material combined with the US's high imports of products that contain rare earth permanent magnets.

Journal of Industrial Ecology↗

Variations in community exposure to lahar hazards from multiple volcanoes in Washington State (USA)

Understanding how communities are vulnerable to lahar hazards provides critical input for effective design and implementation of volcano hazard preparedness and mitigation strategies. Past vulnerability assessments have focused largely on hazards posed by a single volcano, even though communities and officials in many parts of the world must plan for and contend with hazards associated with multiple volcanoes. To better understand community vulnerability in regions with multiple volcanic threats, we characterize and compare variations in community exposure to lahar hazards associated with five active volcanoes in Washington State, USA—Mount Baker, Glacier Peak, Mount Rainier, Mount Adams and Mount St. Helens—each having the potential to generate catastrophic lahars that could strike communities tens of kilometers downstream. We use geospatial datasets that represent various population indicators (e.g., land cover, residents, employees, tourists) along with mapped lahar-hazard boundaries at each volcano to determine the distributions of populations within communities that occupy lahar-prone areas. We estimate that Washington lahar-hazard zones collectively contain 191,555 residents, 108,719 employees, 433 public venues that attract visitors, and 354 dependent-care facilities that house individuals that will need assistance to evacuate. We find that population exposure varies considerably across the State both in type (e.g., residential, tourist, employee) and distribution of people (e.g., urban to rural). We develop composite lahar-exposure indices to identify communities most at-risk and communities throughout the State who share common issues of vulnerability to lahar-hazards. We find that although lahars are a regional hazard that will impact communities in different ways there are commonalities in community exposure across multiple volcanoes. Results will aid emergency managers, local officials, and the public in educating at-risk populations and developing preparedness, mitigation, and recovery plans within and across communities.

Washington↗

Mapping elevations of tidal wetland restoration sites in San Francisco Bay: Comparing accuracy of aerial lidar with a singlebeam echosounder

The southern edge of San Francisco Bay is surrounded by former salt evaporation ponds, where tidal flow has been restricted since the mid to late 1890s. These ponds are now the focus of a large wetland restoration project, and accurate measurement of current pond bathymetry and adjacent mud flats has been critical to restoration planning. Aerial light detection and ranging (lidar) has become a tool for mapping surface elevations, but its accuracy had rarely been assessed for wetland habitats. We used a singlebeam echosounder system we developed for surveying shallow wetlands to map submerged pond bathymetry in January of 2004 and compared those results with aerial lidar surveys in two ponds that were dry in May of 2004. From those data sets, we compared elevations for 5164 (Pond E9, 154 ha) and 2628 (Pond E14, 69 ha) echosounder and lidar points within a 0.375-m radius of each other (0.750-m diameter lidar spot size). We found that mean elevations of the lidar points were lower than the echosounder results by 5 ?? 0.1 cm in Pond E9 and 2 ?? 0.2 cm in Pond E14. Only a few points (5% in Pond E9, 2% in Pond E14) differed by more than 20 cm, and some of these values may be explained by residual water in the ponds during the lidar survey or elevation changes that occurred between surveys. Our results suggest that aerial lidar may be a very accurate and rapid way to assess terrain elevations for wetland restoration projects. ?? 2010 Coastal Education and Research Foundation.

Journal of Coastal Research↗

Barrier island reconfiguration leads to rapid erosion and relocation of a rural Alaska community

Coastal erosion is one of the foremost hazards that circumpolar communities face. Climate change and warming temperatures are anticipated to accelerate coastal change, increasing risk to coastal communities. Most erosion hazard studies for Alaska communities only consider linear erosion and do not anticipate coastal morphologic changes. This study showcases the possibility and consequence of accelerated erosion by examining a shift from stability to rapid erosion that forced the rural Alaska Native village of Meshik (now Port Heiden) to abandon the original town site and relocate inland. A combination of remote sensing, coastal surveys, and community-based monitoring are used to map coastal morphologic changes and identify erosion drivers. The community’s shoreline was stable until a protective barrier island eroded away. The exposure to open ocean waves, coupled with unconsolidated, low-density sediments, led to rapid erosion rates averaging of 5.8 ± 0.6 m/y from the 1970s to 2020s. The sudden and rapid erosion put great stress on Meshik and resulted in the loss of homes, erosion of a safe boat harbor, and pollution of the beach and bay. Erosion of the barrier island coincided with a period of greater storm activity and sea ice decline, but the exact cause for its erosion could not be determined. Many polar communities are built on or behind barriers and are on easily erodible soils such as sands and thawing permafrost. This study highlights the need to study, monitor, and predict morphologic change and regime shifts that can bring catastrophic impacts to coastal communities.

Alaska↗

Understanding organic matter heterogeneity and maturation rate by Raman spectroscopy

Solid organic matter (OM) in sedimentary rocks produces petroleum and solid bitumen when it undergoes thermal maturation. The solid OM is a ‘geomacromolecule’, usually representing a mixture of various organisms with distinct biogenic origins, and can have high heterogeneity in composition. Programmed pyrolysis is a common method to reveal bulk geochemical characteristics of the dominant OM, while detailed organic petrography is required to reveal information about the biogenic origin of contributing macerals. Despite the advantages of programmed pyrolysis, it cannot provide information about the heterogeneity of chemical compositions present in the individual OM types. Therefore, other analytical techniques such as Raman spectroscopy are necessary. In this study, we compared geochemical characteristics and Raman spectra of two sets of naturally and artificially matured Bakken source rock samples. A continuous Raman spectral map on solid bitumen particles was created from the artificially matured hydrous pyrolysis residues, in particular, to show the systematic chemical modifications in microscale. Spectroscopic data was plotted for both sets against thermal maturity to compare maturation rate/path for these two separate groups. The outcome showed that artificial maturation through hydrous pyrolysis does not follow the same trend as naturally-matured samples although having similar solid bitumen reflectance values (%SBRo). Furthermore, Raman spectroscopy of solid bitumen from artificially matured samples indicated the heterogeneity of OM decreases as maturity increases. This may represent an alteration in chemical structure towards more uniform compounds at higher maturity. This study may emphasize the necessity of using analytical methods such as Raman spectroscopy along with conventional geochemical methods to better reveal the underlying chemical structure of OM. Finally, observation by Raman spectroscopy of chemical alteration of OM during artificial maturation may assist in the proposal of improved pyrolysis protocols to better resemble natural geologic processes.

North Dakota↗

Geochemical and Pb isotopic characterization of soil, groundwater, human hair, and corn samples from the Domizio Flegreo and Agro Aversano area (Campania region, Italy)

A geochemical survey was carried out to investigate metal contamination in the Domizio Littoral and Agro Aversano area (Southern Italy) by means of soil, groundwater, human hair and corn samples. Pb isotope ratios were also determined to identify the sources of metals. Specifically, the investigation focused on topsoils ( n = 1064), groundwater ( n = 26), 25 human hair ( n = 24) and corn samples ( n = 13). Topsoils have been sampled and analysed in a previous study for 53 elements (including potentially harmful ones), and determined by ICP-MS after dissolving with aqua regia. Groundwater was analysed for 72 elements by ICP-MS and by ICP-ES. Samples of human hair were prepared and analysed for 16 elements by ICP-MS. Dried corn collected at several farms were also analysed for 53 elements by ICP-MS. The isotopic ratios of 206 Pb/ 207 Pb and 208 Pb/ 207 Pb in selected topsoil ( n = 24), groundwater ( n = 9), human hair ( n = 9) and corn ( n = 4) samples were analysed from both eluates and residues to investigate possible anthropogenic contamination and geogenic contributions. All data were processed and mapped by ArcGis software to produce interpolated maps and contamination factor maps of potentially harmful elements, in accordance with Italian Environmental Law (Legislative Decree 152/06). Results show that soil sampling sites are characterized by As, Cd, Co, Cr, Cu, Hg, Pb, Se, and Zn contents exceeding the action limits established for residential land use (RAL) and, in some cases, also the action limits for industrial land use (IAL) as established by Legislative Decree 152/06. A map of contamination factors and a map showing the degrees of contamination indicate that the areas in the municipalities of Acerra, Casoria and Giugliano have been affected by considerable anthropogenic-related pollution. To interpret the isotopic data and roughly estimate proportion of Pb from an anthropogenic source we broadly defined possible natural and anthropogenic Pb end-member fields based on literature data. For example, we summarized data for Vesuvius and Campi Flegrei volcanic rocks, gasoline, and aerosol deposits. Lead isotope data show mixing between geogenic and anthropogenic sources. Topsoil, groundwater, human hair and corn samples show a greater contribution from geogenic sources like the Yellow Tuff (from Campi Flegrei) and volcanic rocks from Mt. Vesuvius. Aerosols, fly ash and gasoline (anthropogenic sources) have also been contributors. In detail, 46% of the topsoil residues, 96% of topsoil leachates, 88% of groundwater, 90% of human hair, and 25% of corn samples indicate that > 50% percent of the lead in this area can be ascribed to anthropogenic activity.

Campania region↗

Late Cenozoic volcanism, subduction, and extension in the Lassen region of California, southern Cascade Range

Some 537 volcanic vents younger than 7 Ma are identified and these are classified into five age intervals and five compositional categories based on SiO2 content. Maps of vents by age and composition illustrate regionally representative volcanic trends. By 2 Ma, the eastern limit of volcanism had contracted westward toward the late Quaternary arc. Late Quaternary volcanism is concentrated around and north of the silicic Lassen volcanic center. The belt of most recent volcanism (25-0 ka) has been active since at least 2 Ma. Most mafic volcanism is calcalkaline basalt and basaltic andesite. Normal faults and linear groups of vents are evidence of widespread crustal extension throughout most of the Lassen region. NNW orientation of maximum horizontal stress is indicated. The Lassen volcanic region is thought to occur above the subducting Gorda North plate but also within a broad zone of distributed extension that occurs in the North American lithosphere east and southeast of the present Cascadia subduction zone. The scarcity of volcanic rocks older than 7 Ma suggests that a more compressive lithospheric stress regime prior to the late Miocene extensional episode may have suppressed volcanism. -from Authors

Journal of Geophysical Research Solid Earth↗

Ensemble species distribution model identifies survey opportunities for at-risk bearded beaksedge (Rhynchospora crinipes) in the southeastern United States

Locating additional occurrences of at-risk species can inform assessments of their status and conservation needs (including potential legal protections). The perennial bearded beaksedge ( Rhynchospora crinipes ) ranges from Mississippi to North Carolina, but known occurrences are limited. Because of the species' apparent rarity, a model to identify areas with suitable habitat conditions for the species will allow conservationists to effectively prioritize and allocate scarce surveying resources. We used known occurrence records, a suite of environmental datasets, and four species distribution modeling techniques (generalized additive, GAM; maximum entropy, MaxEnt; generalized boosted, GBM; and weighted ensemble) to generate maps to inform surveys for R. crinipes . The ensemble approach improved predictive performance (AUC-PR = 0.95) compared to other techniques (individual model AUC-PR ranged from 0.7 to 0.8). We also obtained quantitative insights on the species' habitat relationships, including the likelihood of R. crinipes 's presence near Atlantic white cedar ( Chamaecyparis thyoides ) habitat and floodplains, which is consistent with prior field observations. The ensemble model indicated that 3.6% of the study area could be suitable habitat, but only 0.38% had high suitability. Small stream riparian habitats and Atlantic swamp forests in Alabama, Florida, and Georgia had the highest proportion of suitable areas. Prioritizing surveys in areas with model-indicated high habitat suitability is expected to reveal additional R. crinipes occurrences. We suggest surveying efforts for other at-risk species may benefit from using an ensemble modeling approach to identify and prioritize survey areas and improve ecological knowledge of these species.

Alabama, Florida, Georgia, Mississippi, North Caro↗