USGS Science⌕ Search

SEARCH · USGS Science

Results for “Topographic Map”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources
USGS2008

Six years of land subsidence in shanghai revealed by JERS-1 SAR data

Differential interferometric synthetic aperture radar (SAR) (DInSAR) has proven to be very useful in mapping and monitoring land subsidence in many regions of the world. Shanghai, China's largest city, is one of such areas suffering from land subsidence as a result of severe withdrawal of groundwater for different usages. DInSAR application in Shanghai with the C-band European Remote Sensing 1 & 2 (ERS-1/2) SAR data has been difficult mainly due to the problem of decorrelation of InSAR pairs with temporal baselines larger than 10 months. To overcome the coherence loss of C-band InSAR data, we used eight L-band Japanese Earth Resource Satellite (JERS-1) SAR data acquired during 2 October 1992 to 15 July 1998 to study land subsidence phenomenon in Shanghai. Three of the images were used to produce two separate digital elevation models (DEMs) of the study area to remove topographic fringes from the interferograms used for subsidence mapping. Six interferograms were used to generate 2 different time series of deformation maps over Shanghai. The cumulative subsidence map generated from each of the time series is in agreement with the land subsidence measurements of Shanghai city from 1990-1998, produced from other survey methods. ?? 2007 IEEE.

Conference Paper↗
USGS2007

The National Assessment of Shoreline Change: A GIS compilation of vector cliff edges and associated cliff erosion data for the California coast

The U.S. Geological Survey has generated a comprehensive data clearinghouse of digital vector cliff edges and associated rates of cliff retreat along the open-ocean California coast. These data, which are presented herein, were compiled as part of the U.S. Geological Survey's National Assessment of Shoreline Change Project. Cliff erosion is a chronic problem along many coastlines of the United States. As coastal populations continue to grow and community infrastructures are threatened by erosion, there is increased demand for accurate information including rates and trends of coastal cliff retreat. There is also a critical need for these data to be consistent from one region to another. One objective of this work is to a develop standard, repeatable methodology for mapping and analyzing cliff edge retreat so that periodic, systematic, and internally consistent updates of cliff edge position and associated rates of erosion can be made at a national scale. This data compilation for open-ocean cliff edges for the California coast is a separate, yet related study to Hapke and others, 2006 documenting shoreline change along sandy shorelines of the California coast, which is itself one in a series that includes the Gulf of Mexico and the Southeast Atlantic coast (Morton and others, 2004; Morton and Miller, 2005). Future reports and data compilations will include coverage of the Northeast U.S., the Great Lakes, Hawaii and Alaska. Cliff edge change is determined by comparing the positions of one historical cliff edge digitized from maps with a modern cliff edge derived from topographic LIDAR (light detection and ranging) surveys. Historical cliff edges for the California coast represent the 1920s-1930s time-period; the most recent cliff edge was delineated using data collected between 1998 and 2002. End-point rate calculations were used to evaluate rates of erosion between the two cliff edges. Please refer to our full report on cliff edge erosion along the California coastline at http://pubs.usgs.gov/of/2007/1133/ for additional information regarding methods and results (Hapke and others, 2007). Data in this report are organized into downloadable layers by region (Northern, Central and Southern California) and are provided as vector datasets with accompanying metadata. Vector cliff edges may represent a compilation of data from one or more sources and the sources used are included in the dataset metadata. This project employs the Environmental Systems Research Institute's (ESRI) ArcGIS as it's Geographic Information System (GIS) mapping tool and contains several data layers (shapefiles) that are used to create a geographic view of the California coast. The vector data form a basemap comprising polygon and line themes that include a U.S. coastline (1:80,000), U.S. cities, and state boundaries.

California↗
USGS2013

Estimation of reservoir storage capacity using multibeam sonar and terrestrial lidar, Randy Poynter Lake, Rockdale County, Georgia, 2012

The U.S. Geological Survey, in cooperation with the Rockdale County Department of Water Resources, conducted a bathymetric and topographic survey of Randy Poynter Lake in northern Georgia in 2012. The Randy Poynter Lake watershed drains surface area from Rockdale, Gwinnett, and Walton Counties. The reservoir serves as the water supply for the Conyers-Rockdale Big Haynes Impoundment Authority. The Randy Poynter reservoir was surveyed to prepare a current bathymetric map and determine storage capacities at specified water-surface elevations. Topographic and bathymetric data were collected using a marine-based mobile mapping unit to estimate storage capacity. The marine-based mobile mapping unit operates with several components: multibeam echosounder, singlebeam echosounder, light detection and ranging system, navigation and motion-sensing system, and data acquisition computer. All data were processed and combined to develop a triangulated irregular network, a reservoir capacity table, and a bathymetric contour map.

Georgia↗
USGS2017

Mapping the grounding zone of Ross Ice Shelf using ICESat laser altimetry

We use laser altimetry from the Ice, Cloud, and land Elevation Satellite (ICESat) to map the grounding zone (GZ) of the Ross Ice Shelf, Antarctica, at 491 locations where ICESat tracks cross the grounding line (GL). Ice flexure in the GZ occurs as the ice shelf responds to short-term sea-level changes due primarily to tides. ICESat repeat-track analysis can be used to detect this region of flexure since each repeated pass is acquired at a different tidal phase; the technique provides estimates for both the landward limit of flexure and the point where the ice becomes hydrostatically balanced. We find that the ICESat-derived landward limits of tidal flexure are, in many places, offset by several km (and up to ∼60 km) from the GL mapped previously using other satellite methods. We discuss the reasons why different mapping methods lead to different GL estimates, including: instrument limitations; variability in the surface topographic structure of the GZ; and the presence of ice plains. We conclude that reliable and accurate mapping of the GL is most likely to be achieved when based on synthesis of several satellite datasets

Annals of Glaciology↗
USGS2007

Report on the final completion of the Unified Lunar Control Network 2005 and Lunar Topographic Model

In order to highlight this project to the extraterrestrial mapping community, we repeat here our earlier abstract [1], with a corrected Figure 2. A report describing the Unified Lunar Control Network 2005 and the files associated with that network is now available as an on-line USGS Open-File Report [2] at the location http://pubs.usgs.gov/of/2006/1367/. A “Readme” file describes the available files, including the report text, the original photogrammetric solution input and output files, derived files such as information on all the control point positions, the expected vertical precision (EVP) of the points and the solution residuals, and a directory containing global DEMs derived from the point positions. While a paper providing further details about the solution is in preparation, we provide some useful additional information about the solution and possible uses for it here.

Conference Paper↗
USGS2018

Geologic map of the Fort Collins 30'×60' quadrangle, Larimer and Jackson Counties, Colorado, and Albany and Laramie Counties, Wyoming

The rocks and landforms of the Fort Collins 30 ′ × 60 ′ 1:100,000-scale U.S. Geological Survey quadrangle reveals a particularly complete record of geologic history in the northern Front Range of Colorado. The Proterozoic basement rocks exposed in the core of the range preserve evidence of Paleoproterozoic marine sedimentation, volcanism, and regional soft-sediment deformation, followed by regional folding and gradational metamorphism. Mesoproterozoic time was marked by intrusion of the Berthoud Plutonic Suite into crust that was structurally neutral or moderately extending in an east-northeast direction. Evidence of the late Paleozoic Anasazi uplift (Ancestral Rocky Mountains uplift) within the quadrangle is recorded by removal of Permian and older sediments and deposition of proximal Pennsylvanian and Permian strata unconformably onto the exhumed Proterozoic basement rocks. The Phanerozoic sediments indicate a steady progression of fluvial, eolian, and lacustrine environments throughout most of the Mesozoic Era which was a time of relatively slow sediment accumulation. Early Cretaceous time was marked by incursion of the Cretaceous Western Interior Seaway, a shallow-water marine embayment that persisted throughout the latter part of the Mesozoic Era. Sedimentation rates increased significantly in the latter part of this period during down-warping related to distant crustal loading by thrusting along the western continental margin. With onset of the Laramide orogeny in latest Cretaceous time, mountain building resumed in this region. This deformation placed Proterozoic rock over Cretaceous and Paleocene strata along the western margin of the Front Range and Medicine Bow Mountains. Post-Laramide time was marked by a prolonged period of weathering, erosion, and planation of the basement-rock surface, extending perhaps into late Oligocene or early Miocene time. Erosion on the eastern slope of the Front Range in late Paleogene to early Neogene time produced a broad, rolling surface surrounding residual highlands and east-trending fluvial channels filled with coarse, boulder gravel. Significant global cooling during the Pliocene led to glaciation during the Quaternary. In the Rocky Mountain region, renewed uplift allowed erosion to accentuate the topographic relief across the high mountains of the map area and established the elevations necessary to trigger accumulation of persistent snow and ice. Mountain glaciers advanced and retreated during at least three glacial-interglacial cycles during the middle and late Pleistocene in this area. Erosion continues to this day on the High Plains east of the mountain front, and progressive incision of the drainage is recorded by at least five major gravel-clad terrace and pediment surfaces along the major fluvial channels that connect to the South Platte River system.

Colorado, Wyoming↗
USGS2018

Geologic map of the Hayfield quadrangle, Frederick County, Virginia

The Hayfield 7.5-minute quadrangle is located within the Valley and Ridge physiographic province of northern Virginia. The quadrangle includes the topographical lowland area of the northern Great Valley to the southeast, the narrow ridge of Little North Mountain along the western edge of the Great Valley, and the broad region of elongated valleys and ridges west of Little North Mountain. The most prominent physiographic feature within the quadrangle is Great North Mountain, which extends across the northwestern portion of the quadrangle. All exposed bedrock units are Paleozoic sedimentary rocks ranging from Middle Cambrian to Late Devonian, approximately 513 to 359 Ma. The clastic and carbonate sedimentary strata in the quadrangle reflect nearshore and offshore marine and deltaic depositional environments. The deposits indicate minor sea level transgression and regression cycles along a passive continental margin during the Late Cambrian to Middle Ordovician, and major sea level changes resulting from tectonic uplift during the Late Ordovician Taconian orogeny and the Middle to Late Devonian Acadian orogeny. Compressive forces caused by the continental collision during the Paleozoic Alleghanian orogeny resulted in folding and faulting of the sedimentary rock strata, with northwestward tectonic transport. The North Mountain fault zone, spanning across the southeastern part of the quadrangle, forms the western border of the Great Valley in northern Virginia and is a series of northeast-trending thrust faults with multiple splays that separate the Silurian and Devonian shales, siltstones, and sandstones from the Cambrian and Ordovician carbonate rocks and shales. Topographic ridges in the quadrangle are primarily held up by sandstones and orthoquartzites that are relatively resistant to erosion. Surficial materials include unconsolidated alluvium, colluvium, debris flow, and terrace deposits that are assumed to be of Quaternary age. Alluvium was mapped along the larger streams; locally, some low alluvial terraces exist but have not been broken out within this unit. Debris flow deposits were mapped where recognized in the lidar-derived topographic imagery on the flanks of Great North Mountain. Colluvium (not mapped separately) covers most of the steeper slopes and fills the bottoms of many of the mountain hollows, and is composed mainly of sandstone boulders and cobbles, and fragments of chert.

Virginia↗
USGS2007

Topographic Slope as a Proxy for Seismic Site-Conditions (VS30) and Amplification Around the Globe

Executive Summary It is well-known that large global earthquakes can have a dramatic effect on local communities and the built environment. Moreover, ground motions amplified by surficial materials can exacerbate the situation, often making the difference between minor and major damage. For a real-time earthquake impact alert system, such as Prompt Assessment of Global Earthquakes for Response (PAGER) (Wald and others, 2006), we seek to rapidly evaluate potential ground shaking in the source region and subsequently provide an estimate of the population exposure to potentially fatal levels of ground shaking in any region of the world. The contribution of surficial geology (particularly soft sediments) to the amplification of ground shaking is an important component in predicting the levels of ground motion observed at any site. Unfortunately, the availability of information regarding seismic siteconditions is only available at a few sites around the globe. Herein, we describe a methodology for deriving maps of seismic site-conditions anywhere in the world using topographic slope as a proxy. Average shear-velocity down to 30 m (or VS30) measurements are correlated against topographic slope to develop two sets of coefficients for predicting VS30: one for active tectonic regions that possess dynamic topographic relief, and one for stable continental regions where changes in topography are more subdued. These coefficients have been applied to the continental United States, in addition to other regions around the world. They are subsequently compared to existing site-condition maps based on geology and observed VS30 measurements, where available. The application of the topographic slope method in regions with abundant VS30 measurements (for example California, Memphis, and Taiwan) indicates that this method provides site condition-maps of similar quality, or in some cases, maps superior to those developed from more traditional techniques. Having a first-order assessment of seismic site-conditions anywhere in the world provides a valuable tool to rapidly estimate ground motions following any global earthquake, the primary motivation for this research. These VS30 maps will enable us to better quantify possible ground shaking and rapidly deliver these predictions to emergency managers and responders. In addition, the VS30 maps for the globe will also have practical applications for numerous related probabilistic- and scenario-based studies. To date, several researchers have requested maps or have used the approach outlined herein for their own applications (for example Cagnan and Kariptas, written commun., 2007; Harmandar and others, 2007). Given that we anticipate a significant demand for these products, we have developed an internet delivery service so that users can download maps and grids of seismic site-conditions for specified regions. To some extent, these grids can also be customized by the user if they disagree with the predefined correlations derived using the methodologies described within this report. Finally, this report represents a more comprehensive account of this technique and provides a more fully illustrated global description of results than that given in Wald and Allen (2007), which has been accepted for publication in the Bulletin of the Seismological Society of America.

Open-File Report↗
USGS1997

Preliminary geologic map of the Little Piute Mountains, California: A digital database

The Little Piute Mountains Digital database contains digital geologic and geographic information for the study area. The geology was mapped at a scale of 1:8,000, and the topographic information was input from the Little Piute Mountains, CA 1:24,000 quadrangle. The accuracy of the spatial information is limited to the input scale. Postscript files, originally published in paper format as Open-file map 95-598, have been included for those who do not have access to a geographic information system. The files are equivalent to those which produced the hard-copy open file. They can be printed on any device equipped to print postscript files of the appropriate file size.

California↗
USGS2011

Phreatophytic land-cover map of the northern and central Great Basin Ecoregion: California, Idaho, Nevada, Utah, Oregon, and Wyoming

Increasing water use and changing climate in the Great Basin of the western United States are likely affecting the distribution of phreatophytic vegetation in the region. Phreatophytic plant communities that depend on groundwater are susceptible to natural and anthropogenic changes to hydrologic flow systems. The purpose of this report is to document the methods used to create the accompanying map that delineates areas of the Great Basin that have the greatest potential to support phreatophytic vegetation. Several data sets were used to develop the data displayed on the map, including Shrub Map (a land-cover data set derived from the Regional Gap Analysis Program) and Gap Analysis Program (GAP) data sets for California and Wyoming. In addition, the analysis used the surface landforms from the U.S. Geological Survey (USGS) Global Ecosystems Mapping Project data to delineate regions of the study area based on topographic relief that are most favorable to support phreatophytic vegetation. Using spatial analysis techniques in a GIS, phreatophytic vegetation classes identified within Shrub Map and GAP were selected and compared to the spatial distribution of selected landforms in the study area to delineate areas of phreatophyte vegetation. Results were compared to more detailed studies conducted in selected areas. A general qualitative description of the data and the limitations of the base data determined that these results provide a regional overview but are not intended for localized studies or as a substitute for detailed field analysis. The map is intended as a decision-support aide for land managers to better understand, anticipate, and respond to ecosystem changes in the Great Basin.

Scientific Investigations Map↗
USGS2007

Database for the Geologic Map of the Summit Region of Kilauea Volcano, Hawaii

INTRODUCTION The area covered by this map includes parts of four U.S. Geological Survey (USGS) 7.5' topographic quadrangles (Kilauea Crater, Volcano, Ka`u Desert, and Makaopuhi). It encompasses the summit, upper rift zones, and Koa`e Fault System of Kilauea Volcano and a part of the adjacent, southeast flank of Mauna Loa Volcano. The map is dominated by products of eruptions from Kilauea Volcano, the southernmost of the five volcanoes on the Island of Hawai`i and one of the world's most active volcanoes. At its summit (1,243 m) is Kilauea Crater, a 3 km-by-5 km collapse caldera that formed, possibly over several centuries, between about 200 and 500 years ago. Radiating away from the summit caldera are two linear zones of intrusion and eruption, the east and the southwest rift zones. Repeated subaerial eruptions from the summit and rift zones have built a gently sloping, elongate shield volcano covering approximately 1,500 km2. Much of the volcano lies under water: the east rift zone extends 110 km from the summit to a depth of more than 5,000 m below sea level; whereas, the southwest rift zone has a more limited submarine continuation. South of the summit caldera, mostly north-facing normal faults and open fractures of the Koa`e Fault System extend between the two rift zones. The Koa`e Fault System is interpreted as a tear-away structure that accommodates southward movement of Kilauea's flank in response to distension of the volcano perpendicular to the rift zones. This digital release contains all the information used to produce the geologic map published as USGS Geologic Investigations Series I-2759 (Neal and Lockwood, 2003). The main component of this digital release is a geologic map database prepared using ArcInfo GIS. This release also contains printable files for the geologic map and accompanying descriptive pamphlet from I-2759.

Data Series↗
USGS2016

Volcano dome dynamics at Mount St. Helens: Deformation and intermittent subsidence monitored by seismicity and camera imagery pixel offsets

The surface deformation field measured at volcanic domes provides insights into the effects of magmatic processes, gravity- and gas-driven processes, and the development and distribution of internal dome structures. Here we study short-term dome deformation associated with earthquakes at Mount St. Helens, recorded by a permanent optical camera and seismic monitoring network. We use Digital Image Correlation (DIC) to compute the displacement field between successive images and compare the results to the occurrence and characteristics of seismic events during a 6 week period of dome growth in 2006. The results reveal that dome growth at Mount St. Helens was repeatedly interrupted by short-term meter-scale downward displacements at the dome surface, which were associated in time with low-frequency, large-magnitude seismic events followed by a tremor-like signal. The tremor was only recorded by the seismic stations closest to the dome. We find a correlation between the magnitudes of the camera-derived displacements and the spectral amplitudes of the associated tremor. We use the DIC results from two cameras and a high-resolution topographic model to derive full 3-D displacement maps, which reveals internal dome structures and the effect of the seismic activity on daily surface velocities. We postulate that the tremor is recording the gravity-driven response of the upper dome due to mechanical collapse or depressurization and fault-controlled slumping. Our results highlight the different scales and structural expressions during growth and disintegration of lava domes and the relationships between seismic and deformation signals.

Washington↗
USGS2008

Modeling rainfall conditions for shallow landsliding in Seattle, Washington

We describe the results from an application of a distributed, transient infiltration–slope-stability model for an 18 km 2 area of southwestern Seattle, Washington, USA. The model (TRIGRS) combines an infinite slope-stability calculation and an analytic, one-dimensional solution for pore-pressure diffusion in a soil layer of finite depth in response to time-varying rainfall. The transient solution for pore-pressure response can be superposed on any steady-state groundwater-flow field that is consistent with model assumptions. Applied over digital topography, the model computes a factor of safety for each grid cell at any time during a rainstorm. Input variables may vary from cell to cell, and the rainfall rate can vary in both space and time. For Seattle, topographic slope derived from an airborne laser swath mapping (ALSM)–based 3 m digital elevation model (DEM), maps of soil and water-table depths derived from geotechnical borings, and hourly rainfall intensities were used as model inputs. Material strength and hydraulic properties used in the model were determined from field and laboratory measurements, and a tension-saturated initial condition was assumed. Results are given in terms of a destabilizing intensity and duration of rainfall, and they were evaluated by comparing the locations of 212 historical landslides with the area mapped as potentially unstable. Because the equations of groundwater flow are explicitly solved with respect to time, the results from TRIGRS simulations can be portrayed quantitatively to assess the potential landslide hazard based on rainfall conditions.

Washington↗
USGS1997

Quaternary geology of Alameda County, and parts of Contra Costa, Santa Clara, San Mateo, San Francisco, Stanislaus, and San Joaquin Counties, California: A digital database

Alameda County is located at the northern end of the Diablo Range of Central California. It is bounded on the north by the south flank of Mount Diablo, one of the highest peaks in the Bay Area, reaching an elevation of 1173 meters (3,849 ft). San Francisco Bay forms the western boundary, the San Joaquin Valley borders it on the east and an arbitrary line from the Bay into the Diablo Range forms the southern boundary. Alameda is one of the nine Bay Area counties tributary to San Francisco Bay. Most of the country is mountainous with steep rugged topography. Alameda County is covered by twenty-eight 7.5' topographic Quadrangles which are shown on the index map. The Quaternary deposits in Alameda County comprise three distinct depositional environments. One, forming a transgressive sequence of alluvial fan and fan-delta facies, is mapped in the western one-third of the county. The second, forming only alluvial fan facies, is mapped in the Livermore Valley and San Joaquin Valley in the eastern part of the county. The third, forming a combination of Eolian dune and estuarine facies, is restricted to the Alameda Island area in the northwestern corner of the county.

California↗