USGS Science⌕ Search

SEARCH · USGS Science

Results for “Arizona Geological Survey Contributed Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,128 records · Page 40Linked to original sources
USGS2025

Cancer risk and estimated lithium exposure in drinking groundwater in the US

Importance Lithium is a naturally occurring element in drinking water and is commonly used as a mood-stabilizing medication. Although clinical studies have reported associations between receiving lithium treatment and reduced cancer risk among patients with bipolar disorder, to our knowledge, the association between environmental lithium exposure and cancer risk has never been studied in the general population. Objectives To evaluate the association between exposure to lithium in drinking groundwater and cancer risk in the general population. Design, Setting, and Participants This cohort study included participants with electronic health record and residential address information but without cancer history at baseline from the All of Us Research Program between May 31, 2017, and June 30, 2022. Participants were followed up until February 15, 2023. Statistical analysis was performed from September 2023 through October 2024. Exposure Lithium concentration in groundwater, based on kriging interpolation of publicly available US Geological Survey data on lithium concentration for 4700 wells across the contiguous US between May 12, 1999, and November 6, 2018. Main Outcome and Measures The main outcome was cancer diagnosis or condition, obtained from electronic health records. Stratified Cox proportional hazards regression models were used to estimate the hazard ratios (HRs) and 95% CIs for risk of cancer overall and individual cancer types for increasing quintiles of the estimated lithium exposure in drinking groundwater, adjusting for socioeconomic, behavioral, and neighborhood-level variables. The analysis was further conducted in the western and eastern halves of the US and restricted to long-term residents living at their current address for at least 3 years. Results A total of 252 178 participants were included (median age, 52 years [IQR, 36-64 years]; 60.1% female). The median follow-up time was 3.6 years (IQR, 3.0-4.3 years), and 7573 incident cancer cases were identified. Higher estimated lithium exposure was consistently associated with reduced cancer risk. Compared with the first (lowest) quintile of lithium exposure, the HR for all cancers was 0.49 (95% CI, 0.31-0.78) for the fourth quintile and 0.29 (95% CI, 0.15-0.55) for the fifth quintile. These associations were found for all cancer types investigated in both females and males, among long-term residents, and in both western and eastern states. For example, for the fifth vs first quintile of lithium exposure for all cancers, the HR was 0.17 (95% CI, 0.07-0.42) in females and 0.13 (95% CI, 0.04-0.38) in males; for long-term residents, the HR was 0.32 (95% CI, 0.15-0.66) in females and 0.24 (95% CI, 0.11-0.52) in males; and the HR was 0.01 (95% CI, 0.00-0.09) in western states and 0.34 (95% CI, 0.21-0.57) in eastern states. Conclusions and Relevance In this cohort study of 252 178 participants, estimated lithium exposure in drinking groundwater was associated with reduced cancer risk. Given the sparse evidence and unknown mechanisms of this association, follow-up investigation is warranted.

contiguous United States↗
USGS2024

Characterization of change in tree cover state and condition over the conterminous United States

Variability in the effects of disturbances and extreme climate events can lead to changes in tree cover over time, including partial or complete loss, with diverse ecological consequences. It is therefore critical to identify in space and time the change processes that lead to tree cover change. Studies of change are often hampered by the lack of data capable of consistently detecting different types of change. Using the Landsat satellite record to create a long time-series of land cover and land cover change, the U.S. Geological Survey Land Change Monitoring Assessment and Projection (LCMAP) project has made an annual time series of land cover across the conterminous United States for the period 1985 to 2018. Multiple LCMAP products analyzed together with map validation reference plots provide a robust basis for understanding tree cover change. In LCMAP (Collection 1.2), annual change detection is based on harmonic model breaks calculated at each Landsat pixel from the Continuous Change Detection and Classification (CCDC) algorithm. The results showed that the majority of CCDC harmonic model breaks (signifying change) indicated partial tree cover loss (associated with management practices such as tree cover thinning) as compared to complete tree cover loss (associated with practices like clearcut harvest or fire disturbance). Substantially fewer occurrences of complete tree cover loss were associated with change in land cover state. The area of annual tree cover change increased after the late 1990s and stayed high for the rest of the study period. The reference data showed that tree harvest dominated across the conterminous United States. The majority of tree cover change occurred in evergreen forests. Large estimates of disturbance-related tree cover change indicated that tree cover loss may have previously been underreported due to omission of partial tree cover loss in prior studies. This has considerable implications for forest carbon accounting along with tracking ecosystem goods and services.

Forests↗
USGS2025

Groundwater hydrology, groundwater and surface-water interactions, water quality, and groundwater-flow simulations for the Wet Mountain Valley alluvial aquifer, Custer and Fremont Counties, Colorado, 2017–19

In 2017, the U.S. Geological Survey, in cooperation with the Upper Arkansas Water Conservancy District, began a study to provide a comprehensive analysis of the Wet Mountain Valley alluvial aquifer, Custer and Fremont Counties, Colorado. The study included collection of data pertaining to groundwater hydrology, groundwater and surface-water interactions, and water quality in the alluvial aquifer. In addition to providing foundational information on the hydrology of the alluvial aquifer, a numerical groundwater-flow model was developed to estimate the potential effects of additional storage of groundwater in the alluvial aquifer. Groundwater-level elevation data from 30 wells were used to estimate groundwater-flow directions in the alluvial aquifer, which were generally from the southwest to northeast, away from the Sangre de Cristo Mountains and towards perennial streams in the center of the valley. Although some seasonal variation was apparent in groundwater-level elevation records, no statistically significant seasonal trends were indicated. Statistically significant long-term trends were indicated in groundwater-level elevation records for 8 of the 30 wells, and of these wells with statistically significant trends, all but 1 indicated a negative trend of groundwater-level elevations. Spatial evaluation of wells with statistically significant negative groundwater-level elevation trends showed many are in areas of denser well drilling for domestic or other uses, indicating increasing groundwater use could potentially be causing groundwater-level elevation declines. There were instances of wells with no statistically significant groundwater-level elevation trends also located in areas of greater density of well completions. Additional investigations may be necessary to more fully characterize the processes responsible for negative groundwater-level elevation trends. Streamflow gain or loss calculations were completed for low flow in 2017–19 and for high flow in 2018 in nine reaches of streams within the study area. Stream reaches of the upper Texas Creek, upper Grape Creek, upper-middle Grape Creek, and Taylor Creek displayed consistent streamflow loss in each period from 2017 to 2019. These stream reaches represent long-term sources of recharge to the alluvial aquifer. Streamflow gain or loss varies through time in other stream reaches (lower Texas Creek, lower-middle Grape Creek, lower Grape Creek below Westcliffe, and lower Grape Creek above DeWeese Reservoir). The temporally variable behavior indicates these stream reaches may be sources of groundwater recharge or areas of groundwater discharge, likely depending on temporal dynamics between the elevation of the water table and the stream. Water-quality samples were collected from 10 groundwater wells and 10 stream sites during September through November 2019. All groundwater and stream samples were analyzed for major and trace elements and stable isotopes of water. A subset of groundwater samples was also analyzed for the environmental tracers sulfur hexafluoride, tritium, and noble gases. Comparison of water-quality results to U.S. Environmental Protection Agency drinking water-quality standards indicated no constituents exceeded primary standards for human health. Spatial evaluation of water quality indicated the concentrations of various constituents are likely controlled by groundwater and surface-water interactions and by spatial variability in bedrock geology underlying the alluvial aquifer. Specifically, streams shown to gain from groundwater had water chemistry constituent compositions similar to groundwater, whereas streams exiting the Sangre de Cristo Mountains tended to have compositions consistent with snowmelt. Groundwater geochemistry appeared to be partially controlled by oxidation-reduction processes and by proximity to igneous rocks in the Wet Mountains. Environmental tracers used to estimate groundwater age indicated all sampled groundwater contained tracers representing modern recharge (approximately less than 65 years old) but mixing of premodern recharge (approximately more than 65 years old) also occurs. Spatial evaluation of environmental tracers indicated large faults may be conduits for upwelling of older groundwater. No trends were observed in groundwater age with well depth, indicating all sampled wells are located within the zone of active groundwater flow. The presence of modern groundwater in wells with statistically significant negative groundwater-level elevation trends indicates groundwater storage depletions may be partially offset by capture of modern recharge. Repeated sampling of groundwater age would be necessary, however, to determine if any trends in groundwater age exist, which may indicate changing groundwater recharge, storage, or discharge. Additional investigations could also consider quantifying groundwater age in deeper wells to more fully define the depth of active groundwater flow. A numerical groundwater-flow model was developed to estimate components of the water budget, simulate groundwater and surface-water interactions, and evaluate the potential effects of aquifer storage and recovery. Simulated groundwater-level elevations from the calibrated groundwater-flow model are similar to the observed pattern of groundwater-level elevations with higher elevations in the western part of the study area along the Sangre de Cristo Mountains. Simulated water-budget components indicate most of the recharge to the alluvial aquifer is derived from streamflow losses, which is consistent with observations of losing streams along the mountain front. The largest groundwater discharge component of the alluvial aquifer was to streams in the center of the valley, where observations of stream gain or loss indicated the predominance of gaining conditions. Comparison of groundwater and surface-water interactions between the calibrated groundwater-flow model for 2000-19 (the base-case model) and a simulation including additional recharge, representing potential aquifer storage and recovery operations, indicated the additional recharge distributed throughout the area had minimal effects on streamflow in the nearby Grape Creek. An analysis of subregional groundwater budgets showed approximately 54 percent of the additional recharge flowed back to nearby Grape Creek, and the other 46 percent was distributed laterally into adjacent cells in the alluvial aquifer. The comparison of simulations and subregional water budget show the additional recharge did not substantially alter groundwater-level elevations or basin wide groundwater storage. Although the analysis of additional recharge provided in the numerical groundwater-flow model considers only one of many possible recharge scenarios, the model provides a useful tool that could be modified for various scenarios to understand potential effects of managed aquifer recharge.

Colorado↗
USGS2025

Estimating agricultural irrigation water consumption for the High Plains aquifer region with integrated energy- and water-balance evapotranspiration modeling approaches

Estimation of irrigation water use provides essential information for the management and conservation of agricultural water resources. Conventionally, water use data are created based on reports and surveys from water users, whereas manual records may not be complete due to lacking flow meters, measurement gaps, inconsistent methods across regions, and time- and cost-consuming data processing. Alternatively, spatially explicit estimation of irrigation water use can be conducted efficiently using remote sensing evapotranspiration (ET) modeling approaches. In this study, we created a gridded blue water evapotranspiration (BWET) dataset to estimate historical irrigation water consumption (1986 – 2020) in the croplands across the United States High Plains aquifer region. The BWET data were generated by integrating an energy-balance ET model [Operational Simplified Surface Energy Balance model (SSEBop)] and a water-balance ET model [Vegetation ET model (VegET)]. BWET in croplands indicates crop consumptive use of irrigation water extracted from surface water and groundwater resources. The BWET estimates were compared with reported irrigation water use data for all counties within the aquifer region. The results revealed high agreement between growing season (May – September) BWET and annual water withdrawal at county level. Specifically, correlation coefficients of volumetric BWET and water withdrawal were 0.90 and 0.96, respectively, for the entire aquifer region and western Kansas. The timeseries of BWET and water withdrawal showed similar temporal trends and high covariations. The BWET estimates were systematically lower than the water withdrawal measurements, which was primarily attributed to blue water losses in the irrigation system. The irrigation efficiency, calculated as the ratio of BWET to water withdrawal depth, was 0.57 and 0.74 for the entire aquifer region and western Kansas, respectively. This study demonstrates the capability of using satellite-based ET models (e.g., SSEBop and VegET) to efficiently estimate crop water consumption and evaluate irrigation efficiency at landscape, county, and regional scales.

Colorado, Kansas, Nebraska, New Mexico, Oklahoma, ↗
USGS2024

A partially nonergodic ground-motion model for Fourier amplitude spectra for the San Francisco Bay area, California, USA

We develop a partially nonergodic ground-motion model (GMM) for Fourier amplitude spectra for the San Francisco Bay Area, California, USA, using the Bayless and Abrahamson (2019) GMM as a reference ergodic GMM and developing location-dependent adjustments to the predicted median and variance. We compile regional ground-motion data from moment magnitude (𝑀 w ) >3 earthquakes occurring during 2000–2022 for which magnitude information is available in the U.S. Geological Survey Comprehensive Catalog (Guy et al., 2015). The data set predominantly consists of records from 𝑀 w 3.5–4.5 earthquakes but includes three well-recorded 𝑀 w > 5 events. Ground-motion residuals are evaluated using the time-averaged shear-wave velocity in the top 30 m (𝑉 S30 ) from the California-specific map of Thompson et al. (2018) and basin-depth site parameters from the seismic velocity model of Aagaard and Hirakawa (2021). The 𝑉 S30 dependence and basin-depth scaling of the reference ergodic GMM of Bayless and Abrahamson (2019) are evaluated and modified with the updated data set. We compute maps of site adjustments using a varying-coefficient model that considers the spatial correlation structure and uncertainties at each observation location. The spatial covariance model is developed using ground-motion residuals that are standardized by the uncertainty model, which allows for consideration of the aleatory variability in developing the site adjustments. The covariance model is fit considering the means and standard deviations of the site terms at all locations. The use of partially nonergodic median adjustments results in modified variance components of the within-event variability. Due to the low number of large-magnitude earthquakes that control seismic hazard in the data set, we do not modify between-event variance; however, we present adjustments to site-to-site variability for use in partially nonergodic hazard assessments.

California↗
USGS2024

The 2023 Alaska National Seismic Hazard Model

US Geological Survey (USGS) National Seismic Hazard Models (NSHMs) are used extensively for seismic design regulations in the United States and earthquake scenario development, as well as risk assessment and mitigation for both buildings and infrastructure. This 2023 update of the long-term, time-independent Alaska NSHM includes substantial changes to both the earthquake rupture forecast (ERF) and ground motion models (GMMs). The ERF includes numerous additions to the finite-fault model, considers two deformation models, and introduces updated declustering and smoothing algorithms in the gridded background seismicity model. For the Alaska–Aleutian subduction zone, megathrust earthquakes occur on an updated structural and segmentation model, and the moment magnitude (M) 8+ rupture and rate model include a logic tree branch that considers slip rates derived from geodetic models of interface coupling. The megathrust model considers multiple models of down-dip width, and magnitudes are computed using newly developed scaling relations. For subduction intraslab events and subduction interface events with M < 7, the 2023 update uses a smoothed seismicity model with rupture depths derived from Slab2. The 2023 model updates GMMs in all tectonic settings using the recently published Next Generation Attenuation Subduction (NGA-Sub) GMMs for subduction interface and intraslab events, and the NGA-West2 GMMs for active crustal settings. Collectively, additions and updates to the Alaska NSHM result in hazard increases across most of south-central Alaska relative to the previous model, published in 2007. These changes are primarily due to the adoption of updated rate models for the large-magnitude interface events and the NGA-Sub GMMs that have much higher aleatory variability (sigma), consistent with global observations, and that include models of epistemic uncertainty.

Alaska↗
USGS2026

Scenarios to assess the future water availability in the Mississippi River Valley Alluvial Aquifer for the Cache River and Grand Prairie Regions of Arkansas

The U.S. Geological Survey, as part of the Arkansas Groundwater Initiative, developed forecast scenarios using previously calibrated MODFLOW 6 groundwater models that focused on the Cache and Grand Prairie Critical Groundwater Areas to assess the impact of future climate and water management strategies on the Mississippi River Valley alluvial aquifer. A Soil Water Balance model was used to forecast recharge and irrigation water use. The forecast scenario period was from January 1, 2019, through December 31, 2055, with monthly stress periods. Twenty scenarios were simulated and included seven alternate climate forecasts, five 13 general groundwater pumping reduction scenarios (round 1), and groundwater pumping reduction scenarios by crop type and for the Bayou Meto Water Management Project and Grand Prairie Area Demonstration Project (round 2). Declines in saturated thickness within the Cache Critical Groundwater Area were larger for 18 of the 20 scenarios as compared to outside of the Critical Groundwater Area. The largest average increase in saturated thickness inside the Critical Groundwater Area was 6.4 m which occurred for the round 1, 50 percent reduction scenario. Automatic reductions in groundwater pumping by MODFLOW 6 in the Cache simulation ranged from 0.02 to 13.1 percent of total groundwater pumping. For the Grand Prairie model domain, the average change in saturated thickness of the Mississippi River Valley alluvial aquifer inside the Critical Groundwater Area for the forecast period ranged between -6.6 to 1.7 m. The average saturated thickness of the Mississippi River Valley alluvial aquifer inside the Grand Prairie Critical Groundwater Area declined for 16 of the 20 scenarios. The average reduction in requested groundwater pumping for all scenarios inside the Grand Prairie Critical Groundwater Area was 25.1 percent, and the largest reduction was 46.5 percent.

ESS Open Archive↗
USGS2024

Wildfire, extreme precipitation and debris flows, oh my! Channel response to compounding disturbances in a mountain stream in the Upper Colorado Basin, USA

Compounding changes in climate and human activities stand to increase sediment input to rivers in many landscapes, including via discrete perturbations such as post-fire debris flows. Because sediment supply is a dominant control on river morphology, understanding mountain river responses to sediment regime perturbations is critical to predicting and addressing downstream effects to infrastructure, water security and aquatic habitat. A growing body of literature explores the causes, likelihood, size and composition of post-fire debris flows, but the channel response to these disturbances remains poorly studied. This study used repeat field surveys, time-lapse photographs and pre- and post-disturbance remote sensing datasets to document and analyse space- and time-varying channel response to post-fire debris flows along a steep mountain stream in the Upper Colorado River Basin, USA. Specifically, we evaluated channel morphology and bed composition changes, correlations between channel changes and valley and channel attributes, and the relative importance of spring snowmelt versus summer monsoon events. Several cross-sectional channel change types were observed from lidar a month after post-fire debris-flow events, including channelized and braided incision into deposits, incision into the pre-fire channel bed, bank erosion and no change. Channel changes were most correlated with pre-fire channel width, valley width and unit stream power, and these relationships could be tested in other burned locations to evaluate their transferability. Repeat channel surveys before and after snowmelt indicate rapid recovery and channel narrowing following major sediment disturbances, although sediment deposits remained in the channel margins. Together, these results highlight the importance of field and remote sensing-based channel surveys to improve understanding of, and potential to predict, mountain channel response to compounding climate disturbances.

Earth Surface Processes and Landforms↗
USGS2026

Birds, breakpoints, and baselines: How citizen science data can reveal ecological boundaries in Kenya’s Upper Tana watershed

Tropical watersheds are increasingly threatened by climate change, land-use conversion, and resource extraction, yet conventional biodiversity monitoring in these systems is often spatially and temporally limited. Citizen science offers a complementary approach, enabling biodiversity data collection over large areas that can supplement professional scientific surveys. We analyzed 10 years (2012–2022) of Upper Tana Watershed bird data from the Kenya Bird Map project, covering 114 pentads (9 × 9 km) within a 17,000 km 2 watershed to assess patterns of bird community composition and distribution across this watershed and to also evaluate the effects of environmental variables, seasonality, and sampling effort to help inform improvements in future citizen science projects. Citizen (or community) scientists recorded 575 species (>50% of Kenya’s total avifauna) in 74 families. Asymptotic species accumulation indicates that most probable species present in the watershed were detected. Threshold indicator taxa analysis revealed distinct ecological boundaries along elevation (∼1,500 m), precipitation (∼1,100 mm), and mean temperature (∼19°C) gradients, corresponding to a turnover from xeric savanna to mesic montane forest assemblages. Notably, bird communities showed little seasonal differentiation between wet and dry periods, consistent with dominance by resident year-round species. Data limitations including uneven survey distribution and frequency, absence of abundance metrics, and coarse representation of local environmental conditions that likely reduced our ability to detect fine-scale species–habitat relationships. Addressing these gaps through spatially balanced sampling at greater resolution, greater survey frequency in underrepresented areas, and improved capture of habitat metrics could strengthen the use of citizen-science bird data for watershed bioassessment. Our findings demonstrate that structured citizen-science initiatives can identify ecological boundaries and inform adaptive management of tropical socio-ecological systems under rapid environmental change.

Upper Tana watershed↗
USGS2024

Following the tug of the audience from complex to simplified hazards maps at Cascade Range volcanoes

Volcano-hazard maps are broadly recognized as important tools for forecasting and managing volcanic crises and for disseminating spatial information to authorities and people at risk. As scientists, we might presume that hazards maps can be developed at the time and with the methods of our discretion, yet the co-production of maps with stakeholder groups, who have programmatic needs of their own, can sway the timing, usability, and acceptance of map products. We examine two volcano hazard map-making efforts by staff at the U.S. Geological Survey. During the 1990s and early 2000s scientists developed a series of hazard assessments and maps with detailed zonations for volcanoes in Washington and Oregon. In 2009, the National Park Service expressed the need for simplified versions of the existing hazard maps for a high-profile visitor center exhibit. This request created an opportunity for scientists to rethink the objectives, scope, content, and map representations of hazards. The primary focus of this article is a discussion of processes used by scientists to distill the most critical information within the official parent maps into a series of simplified maps using criteria specified. We contextualize this project with information about development of the parent maps, public response to the simplified hazard maps, the value of user engagement in mapmaking, and with reference to the abundance of guidance available to the next generation of hazard-mapmakers. We argue that simplified versions of maps should be developed in tandem with any hazard maps that contain technical complexities, not as a replacement, but as a mechanism to broaden awareness of hazards. We found that when scientists endeavor to design vivid and easy-to-understand maps, people in many professions find uses for them within their organization’s information products, resulting in extensive distribution.

Washington↗
USGS2025

Using the D-Claw software package to model lahars in the Middle Fork Nooksack River drainage and beyond, Mount Baker, Washington

Lahars, or volcanic mudflows, are the most hazardous eruption-related phenomena that will affect communities living along rivers that originate on Mount Baker. In the past 15,000 years, the largest lahars from Mount Baker have affected the Middle Fork Nooksack River drainage and beyond. Here we use the physics-based D-Claw software package to model nine lahar scenarios that are initiated as water-saturated landslides between Sherman Crater and the Roman Wall on the Mount Baker edifice and flow down the Middle Fork Nooksack River. The scenarios range in volume from 1 to 260 million cubic meters and have an initial hydraulic permeability from 10 −12 to 10 −10 meters squared. Model output includes data such as flow depth, velocity, runout distance, area inundated, arrival time, and sediment concentration as well as information that allows scientists to calculate other important hydrologic characteristics such as lahar discharge. These data are important to officials who have the responsibility to plan for, or take mitigation measures against, future Mount Baker lahars. To check the validity of the D-Claw results, we compare the scenarios to known geologic information. We also compare D-Claw results with empirical models that have been used in the past to determine potential inundation areas, runout distances, and arrival times. These comparisons highlight similarities and differences between empirical and physics-based models. We also present D-Claw scenario-based animations to help scientists, officials, and lay people alike to visualize how future lahars could affect communities.

Washington↗
USGS2026

Detecting earthquakes in noisy real-time GNSS data with deep learning for improved PGD magnitude estimation

To disseminate accurate and useful warnings, earthquake early warning (EEW) systems must quickly determine the size and location of an earthquake to estimate expected shaking. Traditional seismic‐based algorithms tend to underestimate the true magnitudes of large earthquakes, a phenomenon known as magnitude saturation. This limitation motivated the recent inclusion of Global Navigation Satellite Systems (GNSS) data into the U.S. Geological Survey’s ShakeAlert EEW system with the Geodetic First Approximation of Size and Time (GFAST) algorithm because GNSS data do not saturate with large ground motions. However, the noise levels of GNSS data are very high compared with traditional seismic data, which obscures P ‐wave arrivals and can result in less accurate magnitude estimations if displacement amplitudes are low, such as for lower magnitude earthquakes or large source–station distances. In this study, we develop a deep‐learning model that detects earthquakes in GNSS data and use the Ridgecrest, California, earthquake sequence as a case study to demonstrate how the model could act as a filter to reduce the amount of low‐quality data that enters an algorithm like GFAST. To preserve our limited real earthquake data for model inference, we generated a training dataset composed of >700,000 synthetic displacement waveforms. We combined the synthetic waveforms with real‐time GNSS noise to produce realistically noisy training waveforms and then tested our model on additional synthetic data and performed inference using the real data that were held back. We discuss the performance of our trained model on both the unseen synthetic data and real inference data. Our model can be used to selectively filter only high‐quality data where an earthquake signal is observed for input into an algorithm like GFAST (outperforming a simple signal‐to‐noise ratio–based filter) to reduce the error in GFAST’s real‐time earthquake magnitude estimations.

California↗
USGS2026

A targeted approach for mapping groundwater discharge to surface water and fish thermal refuge in four Lake Ontario tributaries

The duration, magnitude, and frequency of heatwaves are predicted to increase in the coming decades, a combination that can reduce the survival of many fish species. Across the world, there is broad interest in identifying thermal refuge for heat-intolerant fish species and exploring opportunities to enhance or protect these areas. Because deeper groundwater maintains a relatively constant temperature, groundwater-influenced areas along streams can provide cool-water refuge for fish during periods of extreme heat. A targeted approach was developed for identifying existing cold-water zones and areas of substantial groundwater discharge in four high priority Lake Ontario tributaries. Our approach included: (1) predicting where groundwater discharge is most likely with a simple geospatial model and (2) using model predictions to select field sites for intensive high-resolution study, including ground-based mapping of groundwater features (springs, seeps, tributaries) as well as drone-based optical and thermal infrared surveys. Results from field sites were used to both verify model performance and map different types and aerial extents of thermal anomalies. Geospatial modelling successfully predicted regions of widespread groundwater upwelling, later verified and mapped by field and drone surveys. Comparison of model and field survey results further highlighted specific geospatial layers, such as soil/bedrock types and topographic wetness index, as being particularly useful for predicting groundwater influence on streams in the study area. In addition, a comparison of geospatial model results with a model of fish abundances along the studied streams showed significant positive correlations for many heat-intolerant fish species over a wide geographic area. The approach developed in this study can be applied to other watersheds to highlight areas of probable groundwater discharge and could be used by fishery and water resource managers to support cold-water fish habitat management decision-making and resource conservation.

New York↗
USGS2025

Favorability mapping for hydrothermal power resource assessments of the Great Basin, USA

The U.S. Geological Survey (USGS) is updating the 2008 assessment of conventional hydrothermal resources for the Great Basin in the western United States. As part of this work, the workflow for hydrothermal resource favorability maps is being modified to integrate modern data-driven machine learning (ML) methods. Improvements include: [1] using new and refined evidence layers (features); [2] using an order of magnitude more training sites (labeled examples); [3] utilizing simple but non-linear supervised ML algorithms; [4] representing positive training sites (wells with measured heat flow) with their ordinal value proportional to the magnitude of convective upflow (i.e., low, high, or very high convective signals instead of past strategies using positive-negative labels); [5] supplementing training sites with additional sites with low convective signals to represent diverse under-sampled areas where hydrothermal systems are unlikely to exist; [6] comparing with competing approaches; and [7] utilizing Monte Carlo cross-validation to estimate and evaluate prediction uncertainty. For the new favorability map, over half of the power-producing systems (i.e., 15 of 28) are predicted in the 99th percentile of most favorable locations (i.e., the highest 1 % of favorability, corresponding to 1 % of the map area), exceeding the performance of past models that have explicitly used power plants as training sites. Previous favorability maps predicted approximately half of the power-producing hydrothermal systems above the 80th percentile (i.e., 20 % of the map area). For the new favorability map, 93 % of power-producing systems (i.e., 26 of 28) are above the 80th percentile. The power-producing systems for which the new model does not perform well are either comparatively small, low-temperature systems or systems also not predicted well by prior modeling approaches, suggesting that these few systems are unusual when compared with most power-producing systems. Focusing research on these known, seemingly different systems may yield new insights and subsequent discovery of new prospects.

California, Idaho, Nevada, Oregon, Utah↗
USGS2024

Vulnerability assessment of groundwater influenced ecosystems in the Northeastern United States

Groundwater-influenced ecosystems (GIEs) are increasingly vulnerable due to groundwater extraction, land-use practices, and climate change. These ecosystems receive groundwater inflow as a portion of their baseflow or water budget, which can maintain water levels, water temperature, and chemistry necessary to sustain the biodiversity that they support. In some systems (e.g., springs, seeps, fens), this connection with groundwater is central to the system’s integrity and persistence. Groundwater management decisions for human use often do not consider the ecological effects of those actions on GIEs. This disparity can be attributed, in part, to a lack of information regarding the physical relationships these systems have with the surrounding landscape and climate, which may influence the environmental conditions and associated biodiversity. We estimate the vulnerability of areas predicted to be highly suitable for the presence of GIEs based on watershed (U.S. Geological Survey Hydrologic Unit Code 12 watersheds: 24–100 km 2 ) and pixel (30 m × 30 m pixels) resolution in the Atlantic Highlands and Mixed Wood Plains EPA Level II Ecoregions in the northeastern United States. We represent vulnerability with variables describing adaptive capacity (topographic wetness index, hydric soil, physiographic diversity), exposure (climatic niche), and sensitivity (aquatic barriers, proportion urbanized or agriculture). Vulnerability scores indicate that ~26% of GIEs were within 30 m of areas with moderate vulnerability. Within these GIEs, climate exposure is an important contributor to vulnerability of 40% of the areas, followed by land use (19%, agriculture or urbanized). There are few areas predicted to be suitable for GIEs that are also predicted to be highly vulnerable, and of those, climate exposure is the most important contributor to their vulnerability. Persistence of GIEs in the northeastern United States may be challenged as changes in the amount and timing of precipitation and increasing air temperatures attributed to climate change affect the groundwater that sustains these systems.

Connecticut, Delaware, District of Columbia, Maine↗
USGS2025

Assessment of western Oregon debris-flow hazards in burned and unburned environments

In the steep and mountainous environment of western Oregon, debris flows pose a considerable threat to property, infrastructure and life. Wildfire is commonly known to increase the susceptibility of steep slopes to debris flows, but the extent of this process in the western Cascades is not well understood. The US Geological Survey (USGS) currently estimates postfire debris-flow likelihood and triggering rainfall thresholds using a model calibrated to a southern California inventory of debris flows generated by excess runoff within the first year after fire. Because of a lack of available data, this model has not been tested in western Oregon, or in locations where postfire debris flows initiate via other mechanisms (e.g., shallow landslides or in-channel failures). Using repeat field observations and aerial imagery, we developed two new debris-flow inventories within and adjacent to the perimeters of five 2020 wildfires in western Oregon: Archie Creek, Holiday Farm, Beachie Creek, Lionshead and Riverside. The first inventory focuses on postfire debris flows (2020–2022); the second focuses on debris flows prior to fires (1995–2020). Our inventories of prefire and postfire debris flows were used to document initiation mechanisms in Oregon's western Cascades and to evaluate the effects of wildfire. We found that wildfire changed the distribution of debris-flow initiation mechanisms in the western Cascades. After the wildfires, annual rates of runoff-generated debris flows increased by 22% and the number of shallow landslide-initiated debris flows decreased by 17% relative to before the wildfires. Despite this shift, shallow landsliding was the dominant debris-flow initiation mechanism in both unburned and burned environments. We found the performance of the current USGS debris-flow likelihood model was degraded relative to other previously tested locations across the intermountain western United States. Our results highlight the need for improved postfire hazard assessment in western Oregon based on regional model calibration that is tuned to the dominant debris-flow initiation mechanisms.

Oregon↗
USGS2023

Sediment thickness map of United States Atlantic and Gulf Coastal Plain Strata, and their influence on earthquake ground motions

With the recent successful accounting of basin depth ground-motion adjustments in seismic hazard analyses for select areas of the western United States, we move toward implementing similar adjustments in the Atlantic and Gulf Coastal Plains by constructing a sediment thickness model and evaluating multiple relevant site amplification models for central and eastern United States seismic hazard analyses. We digitize and combine existing sediment thickness data sets into a composite surface that delineates the base of Cretaceous sediments under the Atlantic Coastal Plain and the base of Mesozoic sediments under the Gulf Coastal Plain. Amplification models dependent on sediment thickness, site natural period, and source-to-site path length are compared with data sets of observed ground motions to evaluate the ability of the new models to improve ground motion estimates. We find that the amplification models can account for observed trends in sediment-thickness and period-dependent residuals, but some tuning is required. For example, the model of Chapman and Guo requires a reference V S 30 , the time-averaged shear-wave velocity within 30 m of the Earth’s surface, for non-Coastal Plain sites, which we estimate to be between about 1 and 2 km/s. Along with our sediment thickness model, we estimate a velocity profile for application to the Harmon et al. site-natural-period-based model in order to best match the Chapman and Guo period dependence for a broad range of sediment thicknesses. The Next Generation of Attenuation models for the eastern United States Gulf Coast path-based adjustment models can also account for seismic attenuation in the Coastal Plain sediments and reduce the standard deviation of total residuals. If enacted in the U.S. Geological Survey National Seismic Hazard Model, these amplification models will reduce predicted short-period (<1 s) and increase predicted long-period (>1 s) ground motions in the Coastal Plains appreciably.

Earthquake Spectra↗
USGS2025

Capturing the uncertainty of seismicity observations in earthquake rate estimates: Implications for probabilistic seismic hazard analysis and the USGS National Seismic Hazard Model

The rate of earthquakes in a region is a fundamental input to Probabilistic Seismic Hazard Analysis. We present a Monte Carlo method for computing that rate from seismicity catalogs while including a range of data and analysis uncertainties. This method is applied to regions for which the b value is assumed to be spatially invariant. Each region is broken down into epochs for which each epoch is estimated to have a uniform magnitude of completeness ( ⁠⁠ M c ). The distribution of earthquake rates for M ≥ M c is determined for each epoch by considering the Poisson likelihood of rates given the number of observed earthquakes with M ≥ M c ⁠ . We use a Monte Carlo process to include the uncertainty in b , ⁠ M c , and individual event magnitudes. The result for each epoch is the joint distribution of the Poisson rate of earthquakes with magnitudes larger than the minimum value used to calculate hazard ( ⁠⁠ M 1 ) and the Gutenberg–Richter b values, which control the extrapolation to other magnitudes. The rate for each region is either the duration‐weighted average over the epochs or, to better capture temporal variations, we also consider mixture models. The mixture models also provide an avenue to allow temporal variations in b values. To implement this joint distribution in a logic tree, we use the mean and 95% confidence branches, each of which is parameterized with an M ≥ M 1 rate and b value. We explore different ways of defining those branches, as well as non‐Gutenberg–Richter branches, and their impact on hazard estimates. The mean hazard, but not the fractiles, is robust with respect to these choices. To illustrate these new methods, we use synthetic data and catalogs from recent U.S. Geological Survey National Seismic Hazard Models for the Central and Eastern United States and for Puerto Rico and the U.S. Virgin Islands.

central and eastern United States, Puerto Rico, U.↗