USGS Science⌕ Search

SEARCH · USGS Science

Results for “The Seismic Record”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39Linked to original sources

Evidence of shallow fault zone strengthening after the 1992 M7.5 Landers, California, earthquake

Repeated seismic surveys of the Landers, California, fault zone that ruptured in the magnitude (M) 7.5 earthquake of 1992 reveal an increase in seismic velocity with time. P, S, and fault zone trapped waves were excited by near-surface explosions in two locations in 1994 and 1996, and were recorded on two linear, three-component seismic arrays deployed across the Johnson Valley fault trace. The travel times of P and S waves for identical shot-receiver pairs decreased by 0.5 to 1.5 percent from 1994 to 1996, with the larger changes at stations located within the fault zone. These observations indicate that the shallow Johnson Valley fault is strengthening after the main shock, most likely because of closure of cracks that were opened by the 1992 earthquake. The increase in velocity is consistent with the prevalence of dry over wet cracks and with a reduction in the apparent crack density near the fault zone by approximately 1.0 percent from 1994 to 1996.

Science↗

Noise analysis of the seismic system employed in the northern and southern California seismic nets

The seismic networks have been designed and operated to support recording on Develocorders (less than 40db dynamic range) and analog magnetic tape (about 50 db dynamic range). The principal analysis of the records has been based on Develocorder films; and background earth noise levels have been adjusted to be about 1 to 2 mm p-p on the film readers. Since the traces are separated by only 10 to 12 mm on the reader screen, they become hopelessly tangled when signal amplitudes on several adjacent traces exceed 10 to 20 mm p-p. Thus, the background noise level is hardly more than 20 db below the level of largest readable signals. The situation is somewhat better on tape playbacks, but the high level of background noise set to accommodate processing from film records effectively limits the range of maximum-signal to background-earth-noise on high gain channels to a little more than 30 db. Introduction of the PDP 11/44 seismic data acquisition system has increased the potential dynamic range of recorded network signals to more than 60 db. To make use of this increased dynamic range we must evaluate the characteristics and performance of the seismic system. In particular, we must determine whether the electronic noise in the system is or can be made sufficiently low so that background earth noise levels can be lowered significantly to take advantage of the increased dynamic range of the digital recording system. To come to grips with the complex problem of system noise, we have carried out a number of measurements and experiments to evaluate critical components of the system as well as to determine the noise characteristics of the system as a whole.

California↗

Anatahan, Northern Mariana Islands: Reconnaissance geological observations during and after the volcanic crisis of spring 1990, and monitoring prior to the May 2003 eruption

Anatahan island is 9.5 km east–west by 3.5 km north–south and truncated by an elongate caldera 5 km east–west by 2.5 km north–south. A steep-walled pit crater ∼1 km across and ∼200 m deep occupies the eastern part of the caldera. The island is the summit region of a mostly submarine stratovolcano. The oldest subaerial rocks (stage 1) are exposed low on the outer flanks and in the caldera walls. These include thick (∼10 m) and thin (2–3 m) lava flows, well-indurated tuffs, and scoria units that make up the bulk of the island. Rock compositions range from basaltic andesite to dacite, and most are plagioclase-phyric. On the steep north and south flanks of the volcano, these rocks are cut by numerous east–west-oriented, few-hundred-m-long lineaments of undetermined origin. Indurated breccias unconformably overlie scarps cut into stage 1 units low on the south flank. Intermediate-age eruptive units (stage 2) include caldera-filling lava flows and pyroclastic deposits and, on the outer flanks, vents and valley-filling lava flows. The youngest pre-2003 volcanic unit on Anatahan (stage 3) is a hydromagmatic surge and fall deposit rich in accretionary lapilli. Prior to 2003, this unit was found over almost the entire island, and in many places original depositional surfaces and outcrops could be found in high-energy environments along the coast, indicating a young (but undetermined) age. During reconnaissance visits in 1990, 1992, 1994, and 2001, geothermal activity (fumaroles as well as pits with boiling, sediment-laden pools) was observed in the southern part of the pit crater. In March and April 1990, increased local seismicity, a large regional earthquake, and reported increased fumarolic activity in the pit crater prompted evacuation of Anatahan village, at the west end of the island. Our first field investigation took place in late April 1990 to assess the level of volcanic unrest, conduct reconnaissance geological observations, collect rock and geothermal water samples, and set up a geophysical monitoring network. Results at this time were inconclusive with respect to determining whether the activity was anomalous. Water in some of the geothermal pits within the pit crater was boiling, and pH values as low as 0.7 were recorded in the field. An electronic distance measurement (EDM) network was installed, and over a ∼1-week period, up to 9 cm of extension occurred across some lines but not others. Seismicity was characterized by intermittent local earthquakes but no sustained swarms or tremor. A brief visit in June 1990 revealed that the shallow lake near the boiling pits was gone, but activity in the pits themselves was similar to that of April 1990. Only minor extension had occurred along a single EDM line since the previous visit, and no earthquakes >M2.5 occurred during the visit. Subsequent 1- to 2-day visits occurred in October 1990, May 1992, May 1994, and June 2001. Activity within the geothermal pits was relatively constant during every visit, although during this 11-year period the level of the water in each pit decreased. In June 2001, a ∼50-m-wide region of mud pots and steaming ground in the central part of the geothermal area had developed. No geologic evidence, however, suggested that an eruption would occur < 2 years afterward. Most of the EDM lines showed slight extension between late 1990 and 1992, followed by very gradual contraction from 1992 to 2001. A more extensive seismic-monitoring system was installed on the Northern Mariana Islands during these visits, and it recorded a small seismic swarm at Anatahan from May to July 1993. The telemetry component of the seismic equipment broke prior to 2001 and had not been repaired by the time of the May 2003 eruption, so no precursory seismic data were recorded to indicate pre-eruption unrest.

Northern Mariana Islands↗

Seasonal frost effects on the dynamic behavior of a twenty-story office building

Studies have shown that seasonal frost can significantly affect the seismic behavior of a bridge foundation system in cold regions. However, little information could be found regarding seasonal frost effects on the dynamic behavior of buildings. Based on the analysis of building vibration data recorded by a permanent strong-motion instrumentation system, the objective of this paper is to show that seasonal frost can impact the building dynamic behavior and the magnitude of impact may be different for different structures. Ambient noise and seismic data recorded on a twenty-story steel-frame building have been analyzed to examine the building dynamic characteristics in relationship to the seasonal frost and other variables including ground shaking intensity. Subsequently, Finite Element modeling of the foundation-soil system and the building superstructure was conducted to verify the seasonal frost effects. The Finite Element modeling was later extended to a reinforced-concrete (RC) type building assumed to exist at a similar site as the steel-frame building. Results show that the seasonal frost has great impact on the foundation stiffness in the horizontal direction and a clear influence on the building dynamic behavior. If other conditions remain the same, the effects of seasonal frost on structural dynamic behavior may be much more prominent for RC-type buildings than for steel-frame buildings. ?? 2007 Elsevier B.V. All rights reserved.

Cold Regions Science and Technology↗

VS30 at three strong-motion recording stations in Napa and Solano Counties, California — Lovall Valley Road, Broadway Street and Sereno Drive in Vallejo, and Vallejo Fire Station — Calculations determined from S-wave refraction tomography and multichannel analysis of surface waves (Rayleigh and Love)

The August 24, 2014, moment magnitude ( M w ) 6.0 South Napa earthquake caused an estimated $400 million in structural damage to the City of Napa, California. In 2015, we acquired high-resolution P- and S-wave seismic data near three strong-motion recording stations in Napa and Solano Counties where high peak ground accelerations (PGAs) were recorded during the South Napa earthquake. In this report, we present results from three sites—Lovall Valley Loop Road in Napa County (Northern California Seismic Network station, NCSN N019B) and Broadway Street and Sereno Drive (California Geological Survey station, CGS 68294) and Vallejo Fire Station (National Strong Motion Project station, NSMP 1759) in the City of Vallejo, California. To characterize the recording sites in terms of shallow-depth, shear-wave velocities ( V S ), we used both surface waves (Rayleigh and Love) and body waves (S-wave) to evaluate the time-averaged V S in the upper 30 meters of the subsurface ( V S30 ). We used two-dimensional (2D) multichannel analysis of surface waves (MASW) to evaluate V S from surface waves, and a refraction tomography inversion algorithm, developed by Hole in 1992, to evaluate V S from the body waves. As determined by the tomography and MASW analysis for Love waves, we found V S30 near the strong-motion recording stations at Lovall Valley Loop Road, Broadway Street and Sereno Drive, and the Vallejo Fire Station to be from 711 meters per second (m/s) to 767 m/s, 455 to 673 m/s, and 490 to 583 m/s, respectively. We found that V S30 determined from Love waves were higher than those determined from Rayleigh waves at the Lovall Valley Loop Road recording site (221 m/s higher) and at the Vallejo Fire Station site (62 and 48 m/s higher); however, V S30 from Love waves was lower than those from Rayleigh waves at the Broadway Street and Sereno Drive site (78 m/s lower). We also found that V S30 varied depending on the number of shot points used in our MASW analysis for both Love and Rayleigh waves. Furthermore, V S30 values determined from S-wave refraction tomography are generally closer to those determined from MASW using Love waves than those determined using Rayleigh waves.

California↗

Rupture branching structure of the 2014 Mw 6.0 South Napa, California earthquake inferred from explosion-generated fault-zone trapped waves

We present evidence for multiple fault branches of the West Napa fault zone (WNFZ) based on fault‐zone trapped waves (FZTWs) generated by two explosions that were detonated within the main surface rupture zone produced by the 24 August 2014 Mw 6.0 South Napa earthquake. The FZTWs were recorded by a 15‐kilometer‐long dense (100 m spacing) linear seismic array consisting of 155 4.5‐hertz three‐component seismometers that were deployed across the surface ruptures and adjacent faults in Napa Valley in the summer of 2016. The two explosions were located ∼3.5 km north and ∼5 km south of the 2016 recording array. Prominent FZTWs, with large amplitudes and long wavetrains following the P and S waves, are observed on the seismograms. We analyzed FZTW waveforms in both time and frequency domains to characterize the branching structure of subsurface rupture zones along the WNFZ. The 2014 surface rupture zone was ∼12 km in length along the main trace of the WNFZ, which appears to form an ∼400–600‐meter‐wide low‐velocity waveguide to depths in excess of 5–7 km. Seismic velocities within the main rupture are reduced by 40%–50% relative to the surrounding‐rock velocities. Within 1.5 km of the main trace of the WNFZ, there are at least two subordinate fault traces that formed 3‐ to 6‐kilometer‐long surface breaks during the 2014 mainshock. Our modeling suggests that these subordinate fault traces are also low‐velocity waveguides that connect with the main rupture at depths of ∼2–3 km⁠ , forming a flower structure. FZTWs were also recorded at seismic stations across the Carneros fault (CF), which is ∼1 km west of the WNFZ; this suggests that the CF connects with the WNFZ at shallow depths, even though the CF did not experience surface rupture during the 2014 Mw 6.0 mainshock. 3D finite‐difference simulations of recorded FZTWs imply a branching structure along multiple fault strands associated with the WNFZ.

California↗

Sharpness of upper-mantle discontinuities determined from high-frequency reflections

AN understanding of the nature of seismic discontinuities in the Earth's upper mantle is important for understanding mantle processes: in particular, the amplitude and sharpness of these discontinuities are critical for assessing models of upper-mantle phase changes and chemical layering. So far, seismic studies aimed at determining the thickness and lateral variability of upper-mantle discontinuities have yielded equivocal results, particularly for the discontinuity at 410km depth1,2. Here we present short-period (0.8-2.0 s) recordings of upper-mantle precursors to the seismic phase P???P??? (PKPPKP) from two South American earthquakes recorded by the ???700-station short-period array in California. Our results show that the 410- and 660-km discontinuities beneath the Indian Ocean are locally simple and sharp, corresponding to transition zones of 4 km or less. These observations pose problems for mineral physics models3-5, which predict a transitional thickness greater than 6 km for the peridotite to ??-spinel phase transition. In contrast to the results of long-period studies6,7, we observe no short-period arrivals from near 520 km depth.

Nature↗

The U.S. Geological Survey’s Rapid Seismic Array Deployment for the 2019 Ridgecrest Earthquake Sequence

Rapid seismic deployments following large earthquakes capture ephemeral near‐field recordings of aftershocks and ambient noise that can provide valuable data for seismological studies. The U.S. Geological Survey installed 19 temporary seismic stations following the 4 July 2019 M w 6.4 and 6 July 2019 (UTC) M w 7.1 earthquakes near the city of Ridgecrest, California. The stations record the aftershock sequence beginning two days after the mainshock and are expected to remain in the field through approximately January 2020. The deployment augments the permanent seismic network in the area to improve azimuthal coverage and provide additional near‐field observations. This article summarizes the motivation and goals of the deployment; details of station installation, instrumentation, and configurations; and initial data quality and observations from the network. We expect these data to be useful for a range of studies including detailing near‐field variability in strong ground motions, determining stress drops and rupture directivity of small events, imaging the fault zone, documenting the evolution of crustal properties within and outside of the fault zone, and others.

California↗

Sharpness of upper-mantle discontinuities determined from high-frequency reflections

An understanding of the nature of seismic discontinuities in the Earth's upper mantle is important for understanding mantle processes: in particular, the amplitude and sharpness of these discontinuities are critical for assessing models of upper-mantle phase changes and chemical layering. So far, seismic studies aimed at determining the thickness and lateral variability of upper-mantle discontinuities have yielded equivocal results, particularly for the discontinuity at 410km depth 1,2 . Here we present short-period (0.8–2.0 s) recordings of upper-mantle precursors to the seismic phase P′P′ (PKPPKP) from two South American earthquakes recorded by the ∼ 700-station short-period array in California. Our results show that the 410- and 660-km discontinuities beneath the Indian Ocean are locally simple and sharp, corresponding to transi-tion zones of 4 km or less. These observations pose problems for mineral physics models 3–5 , which predict a transitional thickness greater than 6 km for the peridotite to β -spinel phase transition. In contrast to the results of long-period studies 6,7 , we observe no short-period arrivals from near 520 km depth.

Nature↗

Database for earthquake strong motion studies in Italy

We describe an Italian database of strong ground motion recordings and databanks delineating conditions at the instrument sites and characteristics of the seismic sources. The strong motion database consists of 247 corrected recordings from 89 earthquakes and 101 recording stations. Uncorrected recordings were drawn from public web sites and processed on a record-by-record basis using a procedure utilized in the Next-Generation Attenuation (NGA) project to remove instrument resonances, minimize noise effects through low- and high-pass filtering, and baseline correction. The number of available uncorrected recordings was reduced by 52% (mostly because of s-triggers) to arrive at the 247 recordings in the database. The site databank includes for every recording site the surface geology, a measurement or estimate of average shear wave velocity in the upper 30 m (V s30 ), and information on instrument housing. Of the 89 sites, 39 have on-site velocity measurements (17 of which were performed as part of this study using SASW techniques). For remaining sites, we estimate V s30 based on measurements on similar geologic conditions where available. Where no local velocity measurements are available, correlations with surface geology are used. Source parameters are drawn from databanks maintained (and recently updated) by Istituto Nazionale di Geofisica e Vulcanologia and include hypocenter location and magnitude for small events (M< ??? 5.5) and finite source parameters for larger events. ?? 2009 A.S. Elnashai & N.N. Ambraseys.

Journal of Earthquake Engineering↗

Basin amplification effects in the Puget Lowland, Washington from strong motion recordings and 3D simulations

Sedimentary basins in the Puget Sound region, Washington State, increase ground‐motion intensity and duration of shaking during local earthquakes. We analyze Pacific Northwest Seismic Network and U.S. Geological Survey strong‐motion recordings of five local earthquakes ( M 3.9–6.8), including the 2001 Nisqually earthquake, to characterize sedimentary basin effects within the Seattle and Tacoma basins. We observe basin‐edge generated surface waves at sites within the Seattle basin for most ray paths that cross the Seattle fault zone. We also note previously undocumented basin‐edge surface waves in the Tacoma basin during one of the local earthquakes. To place quantitative constraints on basin amplification, we determine amplification factors by computing the spectral ratios of inside‐basin sites to outside‐basin sites at 1, 2, 3, and 5 s periods. Ground shaking is amplified in the Seattle basin for all the earthquakes analyzed and for a subset of events in the Tacoma basin. We find that the largest amplification factors in the Seattle basin are produced by a shallow earthquake located to the southwest of the basin. Our observation suggests that future shallow crustal and megathrust earthquakes rupturing west of the Puget Lowland will produce greater amplification within the Seattle basin than has been seen for intraslab events. We also perform ground‐motion simulations using a finite‐difference method to validate a 3D Cascadia velocity model (CVM) by comparing properties of observed and synthetic waveforms up to a frequency of 1 Hz. Basin‐edge effects are well reproduced in the Seattle basin, but are less well resolved in the Tacoma basin. Continued study of basin effects in the Tacoma basin would improve the CVM.

Washington↗

Subsurface fault damage zone of the 2014 M w 6.0 South Napa, California, earthquake viewed from fault‐zone trapped waves

The aftershocks of the 24 August 2014 M w 6.0 South Napa earthquake generated prominent fault‐zone trapped waves (FZTWs) that were recorded on two 1.9‐km‐long seismic arrays deployed across the northern projection (array 1, A1) and the southern part (A2) of the surface rupture of the West Napa fault zone (WNFZ). We also observed FZTWs on an array (A3) deployed across the intersection of the Franklin and Southampton faults, which appear to be the southward continuations of the WNFZ. A1, A2, and A3 consisted of 20, 20, and 10 L28 (4.5 Hz) three‐component seismographs. We analyzed waveforms of FZTWs from 55 aftershocks in both time and frequency to characterize the fault damage zone associated with this M w 6.0 earthquake. Post‐ S coda durations of FZTWs increase with epicentral distances and focal depths from the recording arrays, suggesting a low‐velocity waveguide along the WNFZ to depths in excess of 5–7 km. Locations of the aftershocks showing FZTWs, combined with 3D finite‐difference simulations, suggest the subsurface rupture zone having an S ‐wave speed reduction of ∼40%–50% between A1 and A2, coincident with the ∼14‐km‐long mapped surface rupture zone and at least an ∼500‐m‐wide deformation zone. The low‐velocity waveguide along the WNFZ extends further southward to at least A3, but with a more moderate‐velocity reduction of 30%–35% at ray depth. This last FZTW observation suggests continuity between the WNFZ and Franklin fault. The waveguide effect may have localized and amplified ground shaking along the WNFZ and the faults farther to the south (see a companion paper by Catchings et al. , 2016 ).

California↗

A regional assessment of potential environmental hazards to and limitations on petroleum development of the Southeastern United States Atlantic continental shelf, slope, and rise, offshore North Carolina

More than 11,000 km of high-resolution seismic-reflection data, 325 km of mid-range sidescan-sonar data, and 500 km of long-range sidescan-sonar data were examined and used to construct an environmental geology map of the Continental Shelf, Slope, and Rise for the area of the U.S. Atlantic margin between lats. 32?N. and 37?N. Hardgrounds and two faults described in previous literature also are shown on the map. On the Continental Shelf, at least two faults, the Helena Banks fault and the White Oak lineament, appear to be tectonic in origin. However, a lack of historical seismicity associated with these faults indicates that they are probably not active at the present time. Hardgrounds are widely scattered but are most abundant in Onslow Bay. Although paleostream channels are common nearshore, they do not appear to be common on the central and outer shelf except off Albemarle Sound where extensive Pleistocene, Pliocene, and late Miocene channels extend across the shelf. Mobile bottom sediments are confined mainly to the shoals off Cape Romain, Cape Fear, Cape Lookout, and Cape Hatteras. Elsewhere the sand cover is thin, and older more indurated rocks are present in subcrop. No slope-instability features were noted on the Florida-Hatteras slope off North Carolina. The lack of features indicates that this slope is relatively stable. Evidence for scour by strong currents is ubiquitous on the northern Blake Plateau although deep-water reefs are sparse. The outer edge of the plateau is dominated by a major growth fault and numerous splay and antithetic faults. These faults are the product of salt tectonism in the Carolina trough and thus are not associated with seismicity. Displacements observed near the sea floor and breached diapirs offshore indicate that the main fault is still moving. Associated with the faults are collapse features that are interpreted to be caused by karst solution and cavernous porosity in Eocene and Oligocene limestones at depth. Major slumps have taken place in two large areas of the Continental Slope. Seismic-reflection profiles of the southern area, centered on the lower slope at 1at. 33?N., long. 76?W., show a 80-m-hlgh scarp in which bedding has been truncated. Rotational slump faults are present in this area on the middle and upper slope. Sidescan images show that large blocks have slid downslope from the scarp face, furrowing the bottom. High-resolution (3.5-kHz) records show that the rotational slump faults upslope are active. The association of these slumps and the scarps with salt diapirs suggests subsidence accompanying salt tectonism as the cause. Seismic-reflection records over the northern area, at about fat. 36?20'N., long. 74?40'W., show two steep scarps, each about 225 m high on the upper and middle-slope. These slump scars and an absence of Pleistocene sediments indicate that large blocks of the slope have been removed by slumping. The slope north of fat. 35?N. is highly dissected by canyons. Mid-range sidescan-sonar records suggest that the canyons are the product of mass wasting and have probably formed largely by slumping. Sediments in a wide zone on the upper rise are highly disturbed and faulted owing to salt tectonism. Twenty-six salt diapirs are mapped, as is a zone of disturbed bottom related to salt tectonism. An area of frozen bottom (clathrate) under which shallow free gas is trapped underlies the outer Blake Plateau, the slope, and the upper rise. Although the hazards of drilling into or through clathrates have not been tested, the release of gas from beneath this frozen layer may prove to be a primary hazard to exploration.

Open-File Report↗

The global seismographic network reveals atmospherically coupled normal modes excited by the 2022 Hunga Tonga eruption

The eruption of the submarine Hunga Tonga-Hunga Haʻapai (Hunga Tonga) volcano on 15 January 2022, was one of the largest volcanic explosions recorded by modern geophysical instrumentation. The eruption was notable for the broad range of atmospheric wave phenomena it generated and for their unusual coupling with the oceans and solid Earth. The event was recorded worldwide across the Global Seismographic Network (GSN) by seismometers, microbarographs and infrasound sensors. The broad-band instrumentation in the GSN allows us to make high fidelity observations of spheroidal solid Earth normal modes from this event at frequencies near 3.7 and 4.4 mHz. Similar normal mode excitations were reported following the 1991 Pinatubo (Volcanic Explosivity Index of 6) eruption and were predicted, by theory, to arise from the excitation of mesosphere-scale acoustic modes of the atmosphere coupling with the solid Earth. Here, we compare observations for the Hunga Tonga and Pinatubo eruptions and find that both strongly excited the solid Earth normal mode 0 S 29 (3.72 mHz). However, the mean modal amplitude was roughly 11 times larger for the 2022 Hunga Tonga eruption. Estimates of attenuation ( Q ) for 0 S 29 across the GSN from temporal modal decay give Q = 332 ± 101, which is higher than estimates of Q for this mode using earthquake data ( Q = 186.9 ± 5). Two microbarographs located at regional distances (<1000 km) to the volcano provide direct observations of the fundamental acoustic mode of the atmosphere. These pressure oscillations, first observed approximately 40 min after the onset of the eruption, are in phase with the seismic Rayleigh wave excitation and are recorded only by microbarographs in proximity (<1500 km) to the eruption. We infer that excitation of fundamental atmospheric modes occurs within a limited area close to the site of the eruption, where they excite select solid Earth fundamental spheroidal modes of similar frequencies that are globally recorded and have a higher apparent Q due to the extended duration of atmospheric oscillations.

Geophysical Journal International↗

Catalog of earthquake hypocenters at Alaskan volcanoes: January 1 through December 31, 2006

Between January 1 and December 31, 2006, AVO located 8,666 earthquakes of which 7,783 occurred on or near the 33 volcanoes monitored within Alaska. Monitoring highlights in 2006 include: an eruption of Augustine Volcano, a volcanic-tectonic earthquake swarm at Mount Martin, elevated seismicity and volcanic unrest at Fourpeaked Mountain, and elevated seismicity and low-level tremor at Mount Veniaminof and Korovin Volcano. A new seismic subnetwork was installed on Fourpeaked Mountain. This catalog includes: (1) descriptions and locations of seismic instrumentation deployed in the field during 2006, (2) a description of earthquake detection, recording, analysis, and data archival systems, (3) a description of seismic velocity models used for earthquake locations, (4) a summary of earthquakes located in 2006, and (5) an accompanying UNIX tar-file with a summary of earthquake origin times, hypocenters, magnitudes, phase arrival times, location quality statistics, daily station usage statistics, and all files used to determine the earthquake locations in 2006.

Alaska↗

Catalog of earthquake hypocenters at Alaskan volcanoes: January 1 through December 31, 2005

The Alaska Volcano Observatory (AVO), a cooperative program of the U.S. Geological Survey, the Geophysical Institute of the University of Alaska Fairbanks, and the Alaska Division of Geological and Geophysical Surveys, has maintained seismic monitoring networks at historically active volcanoes in Alaska since 1988 (Figure 1). The primary objectives of the seismic program are the real-time seismic monitoring of active, potentially hazardous, Alaskan volcanoes and the investigation of seismic processes associated with active volcanism. This catalog presents calculated earthquake hypocenters and seismic phase arrival data, and details changes in the seismic monitoring program for the period January 1 through December 31, 2005. The AVO seismograph network was used to monitor the seismic activity at thirty-two volcanoes within Alaska in 2005 (Figure 1). The network was augmented by two new subnetworks to monitor the Semisopochnoi Island volcanoes and Little Sitkin Volcano. Seismicity at these volcanoes was still being studied at the end of 2005 and has not yet been added to the list of permanently monitored volcanoes in the AVO weekly update. Following an extended period of monitoring to determine the background seismicity at the Mount Peulik, Ukinrek Maars, and Korovin Volcano, formal monitoring of these volcanoes began in 2005. AVO located 9,012 earthquakes in 2005. Monitoring highlights in 2005 include: (1) seismicity at Mount Spurr remaining above background, starting in February 2004, through the end of the year and into 2006; (2) an increase in seismicity at Augustine Volcano starting in May 2005, and continuing through the end of the year into 2006; (3) volcanic tremor and seismicity related to low-level strombolian activity at Mount Veniaminof in January to March and September; and (4) a seismic swarm at Tanaga Volcano in October and November. This catalog includes: (1) descriptions and locations of seismic instrumentation deployed in the field in 2005; (2) a description of earthquake detection, recording, analysis, and data archival systems; (3) a description of seismic velocity models used for earthquake locations; (4) a summary of earthquakes located in 2005; and (5) an accompanying UNIX tar-file with a summary of earthquake origin times, hypocenters, magnitudes, phase arrival times, and location quality statistics; daily station usage statistics; and all HYPOELLIPSE files used to determine the earthquake locations in 2005.

Alaska↗

Toward a comprehensive catalog of global historical seismicity

The United States Geological Survey (USGS) and the Colorado School of Mines (CSM) have initiated a project to locate more accurately all earthquakes recorded by instruments during the period 1900 to 1963. Seismicity for this period (hereafter referred to as historical seismicity, following Lee et al . [1988]) is still poorly understood, even for basic parameters such as earthquake locations (see Figure 1). In some cases this is the result of inherent limitations in the distribution, response characteristics, and timing of the instruments. However, locations for most of the pre-1964 earthquakes are poorly determined simply because modern data analysis techniques have yet to be applied to the available arrival-time observations, which are mainly preserved as printed bulletins and not in a computer-ready digital format. The arduous task of hand-entering these data has prevented the systematic analysis and relocation of historical seismicity.

Eos, Transactions, American Geophysical Union↗

Volcanic and tectonic sources of seismicity near the Tanaga Volcanic Cluster, Alaska

Tanaga Island in the Central Aleutian Islands includes four stratovolcanoes: Sajaka, Tanaga, and East Tanaga in the northwest, and Takawangha in the central part of the island. Of these volcanoes, only Tanaga has a confirmed record of historical eruptive activity. We use double-difference methods to relocate Tanaga Island earthquakes from the period 2003–2017 to gain insight into volcanic and tectonic activity in the region. High precision relative relocations show subsurface structures in the Tanaga region related to volcanism and crustal tectonics. In 2005, a swarm of ∼600 volcano-tectonic events located below the NW portion of the island culminated with an episode of volcanic tremor. Although there was no known eruption associated with this swarm, we suggest that this activity is associated with fluids beneath Takawangha volcano. Overall, relatively little seismicity appears to be associated with volcanism: of 5,680 earthquakes relocated in this study, only ∼700 took place within 10 km of the volcanoes themselves. Other regions appear to experience primarily, if not exclusively, tectonic seismicity. Two regions on Tanaga Island became seismically active following a M6.6 tectonic earthquake east of the island on 2 May 2008, suggesting the triggering of tectonic earthquakes by the M6.6. Seismic activity recorded offshore and below the southern part of the island is interpreted as due to the clockwise rotation of the Delarof Block in the forearc, and bookshelf faulting along the volcanic arc. This suggests a complex pattern of earthquake hypocenters governed by both volcanic and tectonic processes surrounding Tanaga and Takawangha volcanoes.

Alaska↗