USGS Science⌕ Search

USGS · 70033327

Seasonal frost effects on the dynamic behavior of a twenty-story office building

Abstract

Studies have shown that seasonal frost can significantly affect the seismic behavior of a bridge foundation system in cold regions. However, little information could be found regarding seasonal frost effects on the dynamic behavior of buildings. Based on the analysis of building vibration data recorded by a permanent strong-motion instrumentation system, the objective of this paper is to show that seasonal frost can impact the building dynamic behavior and the magnitude of impact may be different for different structures. Ambient noise and seismic data recorded on a twenty-story steel-frame building have been analyzed to examine the building dynamic characteristics in relationship to the seasonal frost and other variables including ground shaking intensity. Subsequently, Finite Element modeling of the foundation-soil system and the building superstructure was conducted to verify the seasonal frost effects. The Finite Element modeling was later extended to a reinforced-concrete (RC) type building assumed to exist at a similar site as the steel-frame building. Results show that the seasonal frost has great impact on the foundation stiffness in the horizontal direction and a clear influence on the building dynamic behavior. If other conditions remain the same, the effects of seasonal frost on structural dynamic behavior may be much more prominent for RC-type buildings than for steel-frame buildings. ?? 2007 Elsevier B.V. All rights reserved.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Z. Yang, U. Dutta, F. Xiong, N. Biswas, H. Benz. 2008. Seasonal frost effects on the dynamic behavior of a twenty-story office building. https://doi.org/10.1016/j.coldregions.2007.05.001

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

Documenting, quantifying, and modeling a large glide avalanche in Glacier National Park, Montana, USA

Glide avalanches present a significant and repetitive challenge to many operational forecasting programs, and they are likely to become more frequent. While the spatial location of glide release areas is extremely consistent, the onset of glide avalanche release is notoriously difficult to forecast, and their destructive potential can be immense. Thus, the timing and dynamics of glide avalanches is an important area of study. To better understand these processes, and to improve assessments of risk to transportation corridors and infrastructure, event documentation is key. Here, we survey a large glide avalanche event along the Going-to-the-Sun Road in Glacier National Park, Montana, USA, during road opening operations in the spring of 2022. Using three sets of terrestrial lidar data (pre-event, post-event, and snow-off), we quantified key aspects of the avalanche and created powerful visualizations for analysis. Further, we evaluated meteorological data from automated weather stations between the onset of glide cracking and avalanche release. Last, we synthesized lidar data with a numerical dynamics model to replicate the event in a simulated environment. Using the tuned model, we determined the critical mean snow depth in the release area necessary for an avalanche to reach the road (4.2 m). Our method may be of particular use for glide avalanches, which tend to release in roughly the same place and time each year at a known interface. This could make the calculated critical depths more consistently reliable and preclude the need for additional tuning in dynamics models. As 1) lidar technology continues to improve and reduce in cost, 2) transportation corridors continue to extend into avalanche terrain, and 3) glide avalanches potentially become increasingly frequent, the synthesis outlined here provides a valuable tool for operational forecasters considering infrastructure threatened by glide events.

Montana↗

A laboratory-based spectrometer intercomparison for the measurement of snow spectra

Seasonal snow is an integral component of global hydrological systems, global energy budget and Earth's climate. As an important part of many Earth systems, seasonal snow is also an essential source of water for many human populations and ecosystems around the world. As such, the measurement of seasonal snow and characterization of uncertainty in those measurements is crucial. To elucidate potential uncertainty attributable to commonly used field spectrometers (and to a lesser extent imaging spectrometers) and associated reference panels, this work presents results from an intercalibration experiment conducted synchronously with the NASA 2023 Snow Experiment (SnowEx) Albedo campaign near Fairbanks, Alaska USA. Three sets of experiments were carried out under controlled laboratory conditions to characterize the radiometric and spectral wavelength consistency of the instruments as well as the white reference panels used to calculate reflectance from field measurements. Although there was generally good agreement between the instruments, panels, and the references, there were also some notable differences. One instrument showed an average − 74 % change from the reference for radiance, and multiple instruments exceeded the suggested 0.5 nm threshold for spectral wavelength scale. The Discussion section highlights how some of these findings and their implications could improve future field campaigns and general use/maintenance of these high-precision scientific instruments.

Alaska↗

Terrain parameters of glide snow avalanches and a simple spatial glide snow avalanche model

Glide snow avalanches are dangerous and difficult to predict. Despite substantial recent research there is still inadequate understanding regarding the controls of glide snow avalanche release. Glide snow avalanches often occur in similar terrain or the same locations annually, and repeat observations and prior work suggest that specific topography may be critical. Thus, to gain a better understanding of the terrain component of these types of avalanches we examined terrain parameters associated with the specific area of glide snow avalanche release in comparison to avalanche starting zones where no glide snow avalanches were observed (i.e. non-glide snow avalanche terrain). Glide snow avalanche occurrences visible from the Going-to-the-Sun Road corridor in Glacier National Park, Montana from 2003 to 2013 are investigated using a database of all avalanche occurrences derived of daily observations each year from 1 April to 1 June. This yielded 192 glide snow avalanches in 53 distinct avalanche paths. Each avalanche was digitized in a GIS using satellite, oblique, and aerial imagery as reference. A set of 117 non-glide snow avalanche starting zones were also selected in this manner. These were start zones with avalanche activity potential, but without glide avalanches observed. Topographical parameters such as area, slope, aspect, curvature, potential incoming solar radiation, distance from ridge, and elevation were then derived for the entire dataset utilizing tools with a GIS and a 10 m DEM. Ground class and a glide factor were calculated using a four level classification index with in-situ observations and a land surface type layer in a GIS. A total of 21 terrain variables were examined using a univariate analysis between areas where glide snow avalanches occurred and areas where glide snow avalanches were never observed, despite crack formation. Only two variables were not significantly different. The significantly different variables were then used to train a classification tree to distinguish between glide and non-glide snow avalanche terrain. A 10-fold cross validated tree resulted in four decision nodes to classify the data. The nodes split on glide factor, maximum slope angle, seasonal sum of incoming solar radiation, and maximum curvature to distinguish between glide snow avalanche and non-glide snow avalanche terrain with an unweighted average accuracy (RPC) of 0.95 and probability of detection of events (POD) of 0.99. Finally, the results of the cross-validated tree were used in a GIS to examine other areas, not used in the training dataset of the classification tree, of potential glide snow avalanche release within Glacier National Park. Using this understanding of the role of topographic parameters on glide snow avalanche activity, a spatial terrain based model was developed to identify other areas with high glide snow avalanche potential outside of the immediate observation area. This simple spatial model correctly classified 78 percent of actual glide snow avalanche terrain (pixel count) of a small test area of four independent observed glide snow avalanches.

Montana↗