USGS Science⌕ Search

SEARCH · USGS Science

Results for “Tectonics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39Linked to original sources
USGS1998

Use of fault striations and dislocation models to infer tectonic shear stress during the 1995 Hyogo-Ken Nanbu (Kobe) earthquake

Dislocation models of the 1995 Hyogo-ken Nanbu (Kobe) earthquake derived by Yoshida et al. (1996) show substantial changes in direction of slip with time at specific points on the Nojima and Rokko fault systems, as do striations we observed on exposures of the Nojima fault surface on Awaji Island. Spudich (1992) showed that the initial stress, that is, the shear traction on the fault before the earthquake origin time, can be derived at points on the fault where the slip rake rotates with time if slip velocity and stress change are known at these points. From Yoshida's slip model, we calculated dynamic stress changes on the ruptured fault surfaces. To estimate errors, we compared the slip velocities and dynamic stress changes of several published models of the earthquake. The differences between these models had an exponential distribution, not gaussian. We developed a Bayesian method to estimate the probability density function (PDF) of initial stress from the striations and from Yoshida's slip model. Striations near Toshima and Hirabayashi give initial stresses of about 13 and 7 MPa, respectively. We obtained initial stresses of about 7 to 17 MPa at depths of 2 to 10 km on a subset of points on the Nojima and Rokko fault systems. Our initial stresses and coseismic stress changes agree well with postearthquake stresses measured by hydrofracturing in deep boreholes near Hirabayashi and Ogura on Awaji Island. Our results indicate that the Nojima fault slipped at very low shear stress, and fractional stress drop was complete near the surface and about 32% below depths of 2 km. Our results at depth depend on the accuracy of the rake rotations in Yoshida's model, which are probably correct on the Nojima fault but debatable on the Rokko fault. Our results imply that curved or cross-cutting fault striations can be formed in a single earthquake, contradicting a common assumption of structural geology.

Bulletin of the Seismological Society of America↗
USGS1997

Geomorphic response to tectonically-induced ground deformation in the Wabash Valley

Numerous low- to moderate-intensity earthquakes have been recorded in a zone of diffuse modern seismicity in southwest Indiana, southeast Illinois, and northernmost Kentucky. Structural elements within the zone include the Wabash Valley Fault System, the LaSalle Anticlinal Belt in western Illinois, and the Rough Creek-Shawneetown Fault System in northern Kentucky. The presence of seismically-induced liquefaction features in the near-surface alluvial sediments in the region indicates that strong ground motion has occurred in the recent geological past, but because the glacial and alluvial sediments in the Wabash Valley appear to be otherwise undisturbed, post-Paleozoic ground deformation resulting from movement on these structural elements has not yet been documented. Morphometric analysis of the land surface, detailed mapping of geomorphic elements in the valley, reconnaissance drilling of the Holocene and Pleistocene alluvium, and structural analysis of the bedrock underlying the valley were used to determine whether the geomorphology of the valley and the patterns of alluviation of the Wabash River were affected by surface deformation associated with the seismic zone during the late Pleistocene and Holocene. Among the observed features in the valley that can be attributed to deformation are: (1) tilting of the modern land surface to the west, (2) preferred channel migration toward the west side of the valley, with concomitant impact on patterns of soil development and sedimentation rate, (3) a convex longitudinal profile of the Wabash River where it crosses the LaSalle Anticlinal Belt, and (4) increased incision of the river into its floodplain downstream from the anticlinal belt.

Illinois, Indiana↗
USGS2003

A modern analogue for tectonic, eustatic, and climatic processes in cratonic basins: Gulf of Carpentaria, northern Australia

The Gulf of Carpentaria is a tropical, silled epicontinental sea and may be a modern analogue for ancient cratonic basins. For the purpose of this study, the Gulf of Carpentaria is compared to Pennsylvanian cratonic basins of the United States. During the Pennsylvanian, the North American continent moved from the Southern Hemisphere, through the Equator, into the Northern Hemisphere. Today, the Gulf of Carpentaria–New Guinea region is a few degrees south of the Equator and is moving towards it. During the Pennsylvanian, the world was subjected to major glaciations and associated sea-level changes. The island of New Guinea and the Gulf of Carpentaria have undergone similar processes during the Quaternary. A reconnaissance seismic survey of the gulf conducted by the USGS and the Australian National University (ANU), combined with oil-exploration well data, provided the first step in a systematic evaluation of a modern tropical epicontinental system. During the Cenozoic, the region was dominated by terrestrial sedimentation in a temperate climate. At the same time, carbonates were being deposited on the northern shelf edge of the Australian Plate. During the Miocene, carbonate deposition expanded southward into the gulf region. Then in the Late Miocene, carbonate sedimentation was replaced by terrigenous clastics derived from the developing Central Range of the island of New Guinea, which developed a wetter climate while moving northwards into the tropics. At least 14 basin-wide transgressive–regressive cycles are identified by channels that were eroded under subaerial conditions since about the Miocene. Comparison of the modern Gulf of Carpentaria sequences with those of the Pennsylvanian reveals many similarities.

Gulf Of Carpentaria↗
USGS2022

Insights from the Alabama Hills into Mesozoic magmatism and tectonics in eastern California

New zircon U-Pb ages for the Alabama Hills Granite in Owens Valley, eastern California, range from 103 to 102 Ma, nearly 20 Ma older than previously published zircon ages. The data preclude previously implied links between the pluton and the adjacent Late Cretaceous Mount Whitney Intrusive Suite. Geochronologic and isotopic data indicate a connection between the Alabama Hills Granite and leucogranites to the northwest on the Sierra Nevada crest, as well as a pluton to the southeast in the Coso Range. We refer to these units as the Kearsarge plutons. The suite was intruded from 103 to 100.5 Ma with S 87 r / S 86 r i = 0.7045 "> 87 S 87 r / S 86 r i = 0.7045 "> S r / 86 S r i = 0.7045 to 0.7060 and ε N d i = − 2.4 "> ε N d i = − 2.4 to -4.5 and has distinctive enrichments in high field strength, middle, and heavy rare earth elements, as well as negative Eu anomalies and high Y/Sr. We suggest the Alabama Hills block could not have moved more than 10 km dextrally relative to the Sierra Nevada batholith since the Middle Jurassic and is thus a suitable piercing point for offsets across Owens Valley. The Kearsarge plutons, like other markers on either side of Owens Valley, support approximately 65–75 km of dextral offset across the valley. The suite’s location east of other middle Cretaceous suites, coupled with its mantle-like isotope geochemistry, suggests it could represent backarc magmatism, perhaps controlled by preexisting shear zones or fractures.

California↗
USGS2009

Ultra-deep oxidation and exotic copper formation at the late pliocene boyongan and bayugo porphyry copper-gold deposits, surigao, philippines: Geology, mineralogy, paleoaltimetry, and their implications for Geologic, physiographic, and tectonic controls

The Boyongan and Bayugo porphyry copper-gold deposits are part of an emerging belt of intrusion-centered gold-rich deposits in the Surigao district of northeast Mindanao, Philippines. Exhumation and weathering of these Late Pliocene-age deposits has led to the development of the world's deepest known porphyry oxidation profile at Boyongan (600 m), and yet only a modest (30-70 m) oxidation profile at adjacent Bayugo. Debris flows, volcanic rocks, and fluviolacustrine sediments accumulating in the actively extending Mainit graben subsequently covered the deposits and preserved the supergene profiles. At Boyongan and Bayugo, there is a vertical transition from shallower supergene copper oxide minerals (malachite + azurite + cuprite) to deeper sulfide-stable assemblages (chalcocite ?? hypogene sulfides). This transition provides a time-integrated proxy for the position of the water table at the base of the saturated zone during supergene oxidation. Contours of the elevation of the paleopotentiometric surface based on this min- eralogical transition show that the thickest portions of the unsaturated zone coincided with a silt-sand matrix diatreme breccia complex at Boyongan. Within the breccia complex, the thickness of the unsaturated zone approached 600 in, whereas outside the breccia complex (e.g., at Bayugo), the thickness averaged 50 m. Contours of the paleopotentiometric surface suggest that during weathering, groundwater flowed into the breccia complex from the north, south, and east, and exited along a high permeability zone to the west. The high relief (>550 m) on the elevation of the paleopotentiometric surface is consistent with an environment of high topographic relief, and the outflow zone to the west of the breccia complex probably reflects proximity to a steep scarp intersecting the western breccia complex margin. Stable isotope paleoaltimetry has enabled estimation of the elevation of the land surface, which further constrains the physiographic setting during supergene oxidation. Isotopic measurements of oxygen in supergene kaolinite from Boyongan suggest that local paleometeoric water involved in weathering had a ??180 composition of approximately -5.7 per mil. At the latitude of the southern Philippines, this value corresponds to Pleistocene rain water condensing at elevations between 750 and 1,050 m above contemporary sea level, providing a maximum estimate for the surface elevation during weathering of the porphyry systems. Physiographic reconstuctions suggest that the deep oxidation profile at Boyongan formed in an environment of high topographic relief immediately east of a prominent (>550 m) escarpment. The high permeability contrast between the breccia complex and the surrounding wall rocks, coupled with the proximity of the breccia complex to the escarpment, led to a depressed groundwater table and a vertically extensive unsaturated zone in the immediate vicinity of Boyongan. This thick vadose zone and the low hypogene pyrite/copper sulfide ratios (0.6) at Boyongan promoted in situ oxidation of copper sulfides with only modest (<200 m) supergene remobilization of copper. In contrast, higher hypogene pyrite/chalcopyrite ratios (2.3) at Bayugo led to greater acid production during weathering and more complete leaching of copper above the base of oxidation. This process promoted significant (600 m) lateral dispersion of copper down the paleohydraulic gradient into the diatreme breccia comple, ultimately leading to the formation of an exotic copper deposit. ?? 2009 Society of Economices Geologists, Inc.

Economic Geology↗
USGS2007

New 40Ar/39Ar age determinations and paleomagnetic results bearing on the tectonic and magmatic history of the northern Madison Range and Madison Valley region, southwestern Montana, U.S.A

Detailed 40Ar/39Ar dating and paleomagnetic analysis of dacite porphyry sills and dikes that intrude Cretaceous sedimentary rocks in the northern Madison Range in southwestern Montana show that Laramide shortening was essentially complete by ???69 Ma. A negative paleomagnetic fold test indicates that Laramide folding occurred before cooling of the dacite sills and dikes at ???69 Ma. Laramide deformation began synchronous with deposition of the Livingston Formation rocks at ???79 Ma. These results are consistent with previous observations in the region that show the onset of Laramide deformation in the northern Rocky Mountains becoming progressively younger toward the east. 40Ar/39Ar dating of additional igneous rocks in the northern Madison Valley and around Norris, Montana better define post-Laramide tectonomagmatic events in the region, including Eocene-Oligocene volcanism and Basin and Range crustal extension. Dates from three rhyolitic intrusions near Red Mountain are between 48.71 ?? 0.18 Ma and 49.42 ?? 0.18 Ma, similar to the dates from basal silicic flows of the Virginia City volcanic field (part of the southwest Montana volcanic province), suggesting that the Red Mountain intrusions may have been the sources for some of the early extrusive rocks. Magmatism in the Virginia City volcanic field became generally more mafic with time, and a ???30-Ma basalt flow near Norris is considered a late, outlying member of the volcanic field. A tuff along the east side of the Madison Valley half graben yielded a early middle Miocene date (16.2 ?? 0.19 Ma), suggesting that accelerated crustal extension and associated rapid basin sedimentation probably began in the early Miocene, slightly earlier than previous estimates.

Rocky Mountain Geology↗
USGS1986

Tectonic evolution of Northwest California and Southwest Oregon

Tectonostratigraphic terrances in northwest California and southwest Oregon record a complex history of subduction, collision, and transform faulting. During the late Jurassic Nevadan orogeny, the Elder Creek-Snow Camp and western Klamath terranes were imbricated during collision of an island-arc system with the continental margin. Subsequent collisions are recorded in the Pickett Peak (Early Cretaceous) and Yolla Bolly (middle Cretaceous) terranes.

California, Oregon↗
USGS2013

K-Ar dating and delta O-18-delta D characterization of nanometric illite from Ordovician K-bentonites of the Appalachians: illitization and the Acadian-Alleghenian tectonic activity

Nanometric (<0.02, 0.02–0.05, 0.05–0.1, 0.1–0.2 μm) illite fractions were separated from K-bentonite samples from northwestern Georgia, and studied by X-ray diffraction, oxygen and hydrogen isotope geochemistry, and K-Ar dated to more tightly constrain the tectono-thermal history of the Appalachian orogeny. Their XRD patterns are very similar for a given sample with respect to the peak shapes and positions. They are ordered illite-smectite mixed layers with only small variations in the relative proportions of illite and smectite interlayers. The illite crystal thickness distributions also are very homogeneous across the various size fractions of the same sample, but crystallite thickness varies from sample to sample. It can be concluded from the α-β 2 diagram that illitization occurred in all fractions by simultaneous nucleation and crystal growth, except for one sample. In that sample, a period of growth without nucleation was detected on top of the nucleation and growth episode. The K-Ar ages organize into two isochrons, the first at 319.9 ± 2.0 Ma with an initial 40 Ar/ 36 Ar ratio of 271 ± 66 Ma, and the second at 284.9 ± 1.2 Ma with an initial 40 Ar/ 36 Ar ratio of 310 ± 44. One data point above the older isochron and three between the two isochrons suggest a detrital contamination for the former separate and a possible further generation of nanoparticles for the three others. The samples with the older crystallization age consist of illite and illite-rich mixed-layers, and those with the younger age contain smectite-rich mixed-layers without illite, or illite-enriched illite-smectite mixed-layers. The K-Ar ages fit the age trends published previously for similar K-bentonites with regional age patterns between 240 and 270 Ma in the southwestern region, between 270 and 300 Ma in the central zone and the southern Appalachians, and between 315 and 370 Ma in the northernmost. Each of the two generations of illite crystals yields very consistent δ 18 O (V-SMOW) values at 17 ± 1‰ for the older and at 21 ± 1‰ for the younger. If crystallization temperatures of the nanometric illite were between 100 and 200 °C, as suggested by microthermometric determinations, the hydrothermal fluids had δ 18 O values of 4 ± 1‰ in the Dalton district and of 8 ± 1‰ in the Lafayette, Trenton, and Dirtseller districts at 100 °C, and of 11 ± 1 and 15 ± 1‰ in the same locations at 200 °C, probably because the water-rock isotope exchanges at elevated temperature occurred in rock-dominated systems. The δ 18 O of the fluids remained unchanged during local crystal growth, but varied depending on the geographic location of the samples and timing of illitization. The δD (V-SMOW) values of the different size fractions do not provide consistent information; they range from −70 to −45‰ for most nanometric and micrometric fractions (V-SMOW), but with no apparent coherent pattern. Nanometric illite-rich crystals from K-bentonite that underwent tectono-thermal alteration yield constant ages, constant clay mineralogy, constant crystallite size distributions for all of the nucleating and growing illite-type crystals of each sample, as well as constant δ 18 O values implying constant fluid chemistry, all pointing to geologically sudden crystallization.

Georgia↗
USGS2007

Ages and origins of rocks of the Killingworth dome, south-central Connecticut: Implications for the tectonic evolution of southern New England

The Killingworth dome of south-central Connecticut occurs at the southern end of the Bronson Hill belt. It is composed of tonalitic and trondhjemitic orthogneisses (Killingworth complex) and bimodal metavolcanic rocks (Middletown complex) that display calc-alkaline affinities. Orthogneisses of the Killingworth complex (Boulder Lake gneiss, 456 ?? 6 Ma; Pond Meadow gneiss, ???460 Ma) were emplaced at about the same time as eruption and deposition of volcanic-sedimentary rocks of the Middletown complex (Middletown Formation, 449 ?? 4 Ma; Higganum gneiss, 459 ?? 4 Ma). Hidden Lake gneiss (339 ?? 3 Ma) occurs as a pluton in the core of the Killingworth dome, and, on the basis of geochemical and isotopic data, is included in the Killingworth complex. Pb and Nd isotopic data suggest that the Pond Meadow, Boulder Lake, and Hidden Lake gneisses (Killingworth complex) resulted from mixing of Neoproterozoic Gander terrane sources (high 207Pb/204Pb and intermediate ??Nd) and less radiogenic (low 207Pb/204Pb and low ??Nd) components, whereas Middletown Formation and Higganum gneiss (Middletown complex) were derived from mixtures of Gander basement and primitive (low 207Pb/204Pb and high ??Nd) sources. The less radiogenic component for the Killingworth complex is similar in isotopic composition to material from Laurentian (Grenville) crust. However, because published paleomagnetic and paleontologic data indicate that the Gander terrane is peri-Gondwanan in origin, the isotopic signature of Killingworth complex rocks probably was derived from Gander basement that contained detritus from non-Laurentian sources such as Amazonia, Baltica, or Oaxaquia. We suggest that the Killingworth complex formed above an east-dipping subduction zone on the west margin of the Gander terrane, whereas the Middletown complex formed to the east in a back-arc rift environment. Subsequent shortening, associated with the assembly of Pangea in the Carboniferous, resulted in Gander cover terranes over the Avalon terrane in the west; and in the Middletown complex over the Killingworth complex in the east. Despite similarities of emplacement age, structural setting, and geographic continuity of the Killingworth dome with Oliverian domes in central and northern New England, new and published isotopic data suggest that the Killingworth and Middletown complexes were derived from Gander crust, and are not part of the Bronson Hill arc that was derived from Laurentian crust. The trace of the Ordovician Iapetan suture (the Red Indian line) between rocks of Laurentian and Ganderian origin probably extends from Southwestern New Hampshire west of the Pelham dome of northcentral Massachusetts and is coverd by Mesozoic rocks of the Hartford basin.

American Journal of Science↗
USGS2010

Silurian-Devonian age and tectonic setting of the Connecticut Valley-Gaspé trough of Vermont using U-Pb SHRIMP analyses of detrital zircons

U-Pb SHRIMP ages of detrital zircons from metasedimentary rocks of the Connecticut Valley-Gaspe' trough in Vermont corroborate a Silurian-Devonian age of deposition for these strata and constrain their provenances. Ages of randomly selected detrital zircons obtained from quartzites within the Waits River and Gile Mountain Formations range from Archean to Devonian with Mesoproterozoic, Neoproterozoic, Ordovician, and Silurian age populations suggesting both eastern and western sources of the sediments. The two youngest single-grain detrital zircon ages from samples collected in the Waits River Formation are 418 ± 7 and 415 ± 2 Ma. The youngest single-grain detrital zircon age from the eastern part of the Gile Mountain Formation is 411 ± 8. The youngest detrital zircons from the western portion of the Gile Mountain Formation comprise an age population with a weighted average of 409 ± 5 Ma. These~409 Ma zircons are likely of volcanic origin, perhaps derived from the Piscataquis magmatic belt to the east. The absence of younger volcanic zircons in the coarser-grained eastern facies of the Gile Mountain Formation suggests the eastern sediments are older and were buried during Piscataquis volcanism and deposition in the west. The shift in protoliths from calcareous silts and muds of the Waits River Formation to quartzo-feldspathic sands of the Gile Mountain Formation implies a change from a continental slope-like depositional environment to a near-shore or terrestrial environment of deposition. This change supports a transition in the nature of the basin from an intercontinental back-arc extensional setting to a foreland basin setting. Maximum depositional ages of sediments above and below this facies boundary constrain the timing of transition in basin style between about 415 and 411 Ma. Given the timing of the approaching Acadian wedge, this shift in basin style likely reflects westward migration of thrust sheets during the Acadian orogeny. The finegrained nature of the youngest silts, muds and turbidites suggests that sedimentation occurred in increasingly deeper water. The implied basin subsidence was likely caused by lithospheric flexure as the Acadian wedge approached from the east. The timing of this subsidence is constrained to be younger than the youngest zircons at about 409 Ma.

Vermont↗
USGS2002

SHRIMP and Conventional UPb ages of Ordovician granites and tonalites in the central Appalachian Piedmont: Implications for Paleozoic tectonic events

Discordant Cambrian U-Pb ages of questionable reliability for metamor-phosed plutonic rocks in the central Appalachian Piedmont of northern Virginia, Maryland, and the District of Columbia have led to different regional geologic interpretations and controversies. In this study, we use the sensitive high resolution ion microprobe (SHRIMP) for dating 25-m diameter areas on individual zircons from Piedmont granitoids in an effort to resolve previous controversial ages. Cathodoluminescence images of zoning within the zircons are used to select pristine areas of cores and overgrowths for dating and to help interpret the results. For comparison, hand-picked fractions of zircons from most of the samples were also dated by the conventional isotope dilution thermal ionization mass spectrometry (TIMS) U-Pb method. The combined SHRIMP and TIMS results of this study demonstrate that the Dale City Quartz Monzonite, Norbeck Intrusive Suite, Kensington Tonalite, Goldvein pluton, Lake Jackson pluton, Falls Church Intrusive Suite, Occoquan Granite (main batholith and satellite Bull Run Marina pluton), Georgetown Intrusive Suite, Dalecarlia Intrusive Suite, and related granitoids are parts of an extensive Early to Middle Ordovician magmatic arc. Emplacement of these plutons from about 485 to 450 Ma generally was contemporaneous with major regional deformation and metamorphism, called the Taconic orogeny in rocks of the northern Appalachians. The Ordovician ages supersede most of the discordant Cambrian(?) to Neoproterozoic dates that previously suggested a Potomac or Penobscot orogeny in Piedmont rocks of the Potomac Valley, raising questions about the nature and timing of that event. The Devonian Guilford Granite crosscuts all structures, providing a minimum age for these Paleozoic events.

Virginia, Maryland↗
USGS2004

U-Pb zircon constraints on the tectonic evolution of southeastern Tibet, Namche Barwa area

The eastern syntaxis of the Himalayas is expressed in the crust as a pronounced southward bend in the orogen. The change in strike of geologic features coincides with the high topography of the Namche Barwa region, the exposure of granulite-grade metamorphic rocks, and a 180-degree bend in the Yalu Tsangpo. We have conducted a geochronologic and geochemical investigation of several suites of granitoids collected from the Namche Barwa massif and subjacent terranes of southeastern Tibet, ranging from cm-scale dikes and sills to larger, outcrop-scale intrusions. U-Pb SHRIMP-RG zircon ages establish at least five magmatic episodes: ∼400 to 500 Ma, ∼120 Ma, 40 to 70 Ma, 18 to 25 Ma, and 3 to 10 Ma . These episodes broadly correlate to spatial patterns in sample localities, as follows: 400 to 500 Ma ages occur in zircon cores collected from within the massif proper; ∼120 Ma granites, related to early Gangdese arc plutonism, are primarily located northeast of Namche Barwa; later (40-70 Ma) Gangdese activity is expressed in granites west of Namche Barwa. 18 to 25 Ma granites occur both along the suture zone west of Gyala Peri, and directly north of Namche Barwa along the area of the Jiali fault zone, and are attributed both to shearing within the Jiali fault zone and to an early Miocene Gangdese Thrust event. Exceptionally young (<10 Ma) zircon ages are clustered near the core of the massif, along the Yalu Tsangpo gorge. Trace-element geochemical data indicates the presence of both fluid-present and fluid absent melts, with a fluid-absent (decompression) melting regime dominating near the core of Namche Barwa.

Tibet↗
USGS2010

Further considerations of the Ce/Yb vs. Ba/Ce plot in volcanology and tectonics

A plot of Ce/Yb vs. Ba/Ce, for locality averages, effectively separates mid-ocean ridge basalts (MORB) (Ce/Yb <10, Ba/Ce 1-4.2), oceanic island volcanics (OIV) (Ce/Yb >10, Ba/Ce <6), which are generally hotspot related, and island arc volcanics (IAV) (Ce/Yb <23, Ba/Ce >4.2). The conventional interpretation is that these three types of volcanic environments involve oceanic rift-related, large-volume partial melts (˜20-30%) of a depleted source (MORB), small volume melts (˜5% for alkalic volcanics) of enriched sources related to plumes (OIV), and melts of hydrous-enriched sources during subduction, especially for Ba (IAV). Three OIV sites, however, have average ratios that fall in the MORB field (e.g., Krafla Volcano, Iceland), and these localities also tend to have other geochemical data similar to MORB. Average ratios of Hawaiian tholeiitic shield basalts of Mauna Kea and Koolau volcanoes occupy a restricted field on a plot of Ce/Yb vs. Ba/Ce of 10-18 for Ce/Yb and 2.8-3.1 for Ba/Ce, a field toward which other shield basalts and cone-building volcanics regress. In general, post-shield alkalic rocks have higher values of Ce/Yb than do tholeiites. Peralkalic basalts (basanites, melilitites, and phonolites) have even higher values of Ce/Yb, reflecting smaller degrees of partial melting (perhaps 1-2%) and melting of sources containing phlogopite that were enriched by CO 2 -dominated fluids. The minor post-erosion nephelinitic suites of Hawaii (e.g., the Honolulu Series on Oahu, and the Koloa suite on Kauai) generally have values both greater than IAV for Ce/Yb and greater than other kinds of OIV for Ba/Ce in a part of the plot previously not found to be occupied by data. Alkali basalts of both these nephelinitic series have the lowest and similar ratios (Ce/Yb ˜ 25; Ba/Ce ˜ 10). In the Hawaiian Islands, there are two trends. One (a), where phlogopite has been interpreted to remain in the source, generally has Ba/Ce decrease away from the alkali basalts as Ce/Yb increases. The other (b), where phlogopite has been interpreted to enter the melt, occupies a field that is high in both Ce/Yb (>30) relative to IAV and in Ba/Ce (>8) relative to the OIV field. There are some exceptions, also, for IAV that plot outside the IAV field. The values of Ce/Yb in Mariana Islands samples, for example, are exceptionally low for the IAV (Ce/Yb <5 with many samples <2). Examples of two cross-chain Kasuga Islands, however, have average values of Ce/Yb considerably greater than for any other Mariana Islands data, and individual samples extend from within the IAV field into the OIV field, which may indicate a mixture of IAV and OIV sources (rather than involvement of a hotspot, these island volcanics have been interpreted as magma of OIV entrapped "plums" in an IAV "pudding" by Stern et al., 1993). Not surprisingly, continental arc volcanics (CAV) are generally similar to IAV, but with somewhat greater dispersion in Ce/Yb, perhaps representing a larger contribution of continental materials to the volcanics. Continental rift volcanics (CRV) are complex. The Antarctic rift data fall in the OIV field, and clearly define a hotspot origin for the rift with little contamination in the continental lithosphere, but most CRV data fall in the IAV field (Rio Grande rift tholeiites, Yellowstone Plateau basalts, Columbia River basalts, East African rift basalts). The Yellowstone basalt samples judged to be least crustally contaminated from other considerations (e.g., through Pb and Sr isotopes) approach closest to the OIV or hotspot field in the Ce/Yb vs. Ba/Ce plot, compatible with a hotspot origin with variable continental lithosphere interactions. The data from the Rio Grande rift have no such trend in Ce/Yb vs. Ba/Ce. Other trace element and isotopic data are suggestive of a different kind of origin, perhaps melting in the continental lithosphere from pressure release or other causes as suggested in the literature. Carbonatites, kimberlites, and ultrapotassic rocks form extreme end members for the peralkalic rocks on the continents with Ce/Yb values in the hundreds and even exceeding 1,000 in natrocarbonatite. Carbonatites and kimberlite type I, however, have Ba/Ce <8 with few exceptions. Ultrapo tassic rocks and kimberlite type II also have Ce/Yb values in the hundreds but with Ba/Ce >9. These rocks, although rare in the ocean basins (e.g., carbonatite on São Vicente Island in the Cape Verdes archipelago, Indian Ocean) plot similarly to their continental cousins. For Hawaii, the nephelinitic suites of both the Honolulu and Koloa series trend from alkali and alkali olivine basalt ratios toward higher signatures for Ce/Yb for other rock types. The Honolulu series, however, progresses towards smaller values of Ba/Ce for nephelinite-melilitite (Ce/Yb ˜ 85; Ba/Ce ˜ 5-7) near the low end of Ce/Yb found in carbonatite/kimberlite type I, whereas the Koloa series progresses toward higher Ba/Ce (Ce/Yb ˜ 65; Ba/Ce ˜ 14-15) for nephelinite-melilitite with Ce/Yb values near the lower end of kimberlite type II/ultrapotassic rocks. Carbonated phlogopitic sources have been proposed for peralkalic rocks of both oceans and continents. Carbonatites and/or kimberlites are suggested to possibly be present at depth under the Hawaiian nephelinitic series and in other OIV environments containing peralkalic suites.

International Geology Review↗