USGS Science⌕ Search

SEARCH · USGS Science

Results for “Hydrology and Earth System Sciences (HESS)”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,661 records · Page 38Linked to original sources
USGS2024

Event classification, seismicity, and eruption forecasting at Great Sitkin Volcano, Alaska: 1999–2023

The frequency content of volcanogenic seismicity is often used to classify events and their spatial and temporal progression is then used to map subsurface volcanic processes. The progression of volcano-seismic events and associated source processes also plays a critical role in eruption forecasting. Here we develop and evaluate a computerized methodology for characterizing volcano-seismic event types using Frequency Index and Average Peak Frequency. We apply and test this technique at Great Sitkin Volcano, Alaska, classifying over 9000 hypocenters between 1999 and 2023. This 24-year time span covers periods of seismic quiescence, earthquake activity on nearby tectonic (bookshelf) faults, precursory unrest from 2016 to 2021, and the explosive onset in May 2021 of the ongoing effusive eruption. We use the spatial and temporal evolution of classified event types to map the active volcanic and tectonic processes, develop a conceptual model of the subsurface magmatic system, and perform a retrospective analysis of eruption forecasts at Great Sitkin Volcano between 2016 and the present. The classification and progression of hypocenters suggests the subsurface Great Sitkin Volcano magmatic system consists of a mid- to lower- crustal source zone between 10 and 40 km depth and an upper crustal magma storage area between −1 and 10 km depth (hypocenter depth is referenced to sea level and negative depths reflect height above sea level). The earliest precursors occurred in July 2016 and consisted of deep long-period and volcano-tectonic earthquakes at mid-crustal depths suggesting the subsequent unrest and eruption were triggered by a deeper intrusion of magma. This mid-crustal seismic activity was immediately followed by the onset upper-crustal long-period events and volcano-tectonic earthquakes VTs suggesting a strong linkage between the shallow and deeper portions of the magmatic system. The upper crustal area was likely capped by the 1974 lava dome until the magmatic explosion on May 26, 2021.

Alaska↗
USGS2026

Lunar analog study using portable gamma-ray neutron detector: Radiochemical mapping of silicic-to-basaltic volcanic terrains in the San Francisco Volcanic Field, Arizona

Studying lunar silicic volcanism provides key insights into the Moon’s crustal evolution, magmatic processes, and volcanic history. The Lunar-VISE (Lunar Vulkan Imaging and Spectroscopy Explorer) mission will investigate the Gruithuisen domes, a unique lunar region hypothesized to have formed through silicic volcanism. Using instruments on a Firefly Aerospace lander and a Honeybee Robotics rover, Lunar-VISE will analyze mineralogy, geochemistry, and surface properties to determine the origin and evolution of the domes, with a gamma-ray and neutron spectrometer (LV-GRNS) among its payload instruments. In preparation for this mission, we conducted preliminary fieldwork using a handheld gamma-ray neutron detector with NaI(Tl) and Cs LiYCl :Ce (CLYC) scintillators. This study focuses on various rhyolitic and basaltic volcanic centers in the San Francisco Volcanic Field (SFVF) near Flagstaff, Arizona—specifically Sugarloaf Peak, Bonito Lava Flow, and Robinson Mountain, a region containing several well-characterized lunar analog sites. The SFVF was selected for this study due to its broad compositional diversity spanning basaltic to rhyolitic compositions, its well-preserved volcanic morphologies, and its extensive use in previous NASA field campaigns and astronaut training exercises, making it an ideal terrestrial laboratory for testing planetary exploration techniques. We measured natural radioactivity, specifically from potassium (K), thorium (Th), and uranium (U) and other elements in their decay chains, which serve as diagnostic tracers of magmatic differentiation and crustal evolution processes, to assess geochemical variability across compositionally diverse terrains. The detector’s sensitivity was assessed across varying concentration levels. Regionally averaged concentrations of radioisotopes were determined by gamma-ray spectroscopy at selected sites. Our measurements reveal significant compositional variations between sites, with Sugarloaf Peak (rhyolitic, silicic dome) exhibiting the highest average radioisotope concentrations (K: 3.29 ± 0.24 wt%, U: 14.35 ± 1.81 ppm, Th: 27.14 ± 2.43 ppm), while Bonito Lava Flow (K: 1.13 ± 0.08 wt%, U: 3.86 ± 0.52 ppm, Th: 7.52 ± 1.02 ppm), and Robinson Mountain (K: 1.46 ± 0.16 wt%, U: 5.59 ± 1.06 ppm, Th: 11.75 ± 1.98 ppm) show lower concentrations aligned with basaltic compositions. Gamma-ray fluxes were elevated by a factor of approximately three to four at Sugarloaf Peak relative to nearby basaltic terrains, consistent with expected geochemical differentiation patterns. Furthermore, at meter scales, proximity to geological features significantly affects measurements. Th concentrations adjacent to a cliff face at Sugarloaf’s base were 28% higher than values measured 3-5 meters away from the same feature, demonstrating localized compositional heterogeneity. Analysis of station-by-station measurements reveals that K, U, and Th concentrations show an elevation trend at Robinson Mountain and generally higher concentrations near Sugarloaf Peak’s summit, suggesting progressive magmatic differentiation and/or the presence of more evolved lithologies at higher elevations. By mapping these elements on Earth using GRNS, we aim to optimize measurement techniques for Lunar-VISE and similar rover-borne missions by demonstrating the applicability of portable GRNS instruments for planetary surface exploration in an analog environment.

Arizona↗
USGS2026

Climate-adaptive urban planning: Quantitative assessment of drought impacts and practical strategies for climate-resilient urban green spaces

Urban green spaces (UGSs) are vital for enhancing a city’s resilience and livability; however, their functionality is increasingly jeopardized by drought, particularly in water-scarce regions. This study evaluates drought impact on UGSs in Metropolitan Adelaide, Australia, a representative semi-arid urban system, using satellite-derived Normalized Difference Vegetation Index (NDVI) time-series data spanning 2000–2020. Vegetation dynamics were analyzed through Seasonal-Trend decomposition using Loess (STL), standardized anomaly assessment, lagged Pearson correlation, Ordinary Least Squares (OLS) regression, and Mann–Kendall trend analysis. To isolate climatically sensitive signals, 29 urban lawn patches were examined separately from mixed urban canopy, given their shallow root systems and direct dependence on surface moisture. NDVI declined by approximately 0.09 units during the Millennium Drought (2001–2009), with summer greenness deficits reaching 24% below the 20-year benchmark. Temperature was the dominant driver of lawn NDVI variability (r = −0.863, R 2 = 74.5%), substantially exceeding the effect of rainfall (r = 0.156, R 2 = 2.4%). El Niño–Southern Oscillation (ENSO) cycles modulated vegetation responses, with La Niña years supporting recovery and El Niño years amplifying decline. Post-drought recovery remained incomplete, with NDVI deficits of 8–20% persisting through 2020; full recovery was observed only in 2017, coinciding with the highest recorded summer rainfall. No significant directional trend was detected over the full study period (Mann–Kendall τ = 0.005, p = 0.908). These findings demonstrate that heat, rather than water limitation alone, is the primary driver of vegetation stress in urban systems, highlighting the benefits of integrated management strategies that address both warming and moisture deficits to sustain urban green infrastructure under future climate conditions. We introduce the concept of “urban greenery drought,” referring to a form of vegetation stress in managed urban landscapes where greenness is reduced primarily by elevated temperature and atmospheric demand despite water availability.

Adelaide↗
USGS2024

Predicting hydrothermal reservoir depth from chemical geothermometers using a three-dimensional temperature model in the Great Basin, USA

Recent work in the Great Basin region of the western United States has made it possible to predict the depth of hydrothermal reservoirs (i.e., the depth at which heat is accumulated prior to ascent via hydrothermal upflow) identified through geochemistry and to contextualize the spatial patterns of these reservoir depths. Chemical geothermometers use the chemical and mineral constituents of hydrothermal fluids to predict the temperature at which fluids equilibrated with the host rocks at depth. Assuming that most of the Great Basin is dominated by conductive conditions until a vertically connected hydrothermal flow path is created (e.g., by faulting), geothermometers reflect the chemical and thermal conditions at the depth interval that the fluid has conductively equilibrated over a long period before a vertical conduit allows convective upflow. By pairing geothermometer temperature estimates with our recent three-dimensional temperature model of conductive heat flow in the Great Basin, we estimate the corresponding reservoir depths and construct a map of circulation depths. The predicted depths from geothermometers have spatial patterns across the Great Basin that relate to patterns seen in other geologic and geophysical data. Deeper springs generally occur disproportionately in areas with higher strain rates and in basins. We posit that current elevated strain rates reflect patterns of historic deformation where ongoing tectonic activity maintains permeable pathways to deeper reservoirs, some of which are estimated to exceed 6 km depth. Basins, as expected, contain a disproportionate number of these deep systems, because the underlying aquifers are closer to the surface in basins, thus requiring less water pressure to reach the surface than in mountain ranges. Most springs estimated to have their source in a deep reservoir occur at places known to host a hydrothermal system; these refined depth estimates of the source reservoir can help to better constrain the source depth for many known hydrothermal systems across the Great Basin.

Arizona, California, Idaho, Nevada, Oregon, Utah↗
USGS2024

Hydrogeologic framework and extent of saltwater intrusion in Kings, Queens, and Nassau Counties, Long Island, New York

In 2016, the U.S. Geological Survey began a multiyear cooperative study with the New York State Department of Environmental Conservation to evaluate the sustainability of Long Island’s sole-source aquifer system through hydrogeologic mapping, compilation of groundwater chloride concentrations, and groundwater flow modeling. In the initial phase of the islandwide study, the hydrogeologic framework and extent of saltwater intrusion in aquifers in Kings, Queens, and Nassau Counties on western Long Island, N.Y., were investigated. The aquifer system underlying western Long Island has been under stress from pumping of public, irrigation (golf course), and industrial supply wells. Saltwater intrusion has occurred from surrounding embayments (East River, Long Island Sound, Jamaica Bay, and the Atlantic Ocean) due to pumping. Eighteen boreholes were drilled and cores taken during 2019–21 to collect hydrogeologic, geochemical, and geophysical data to delineate the complex subsurface hydrogeology and extent of saltwater intrusion within the study area. Evaluation of the new cores, reexamination of legacy core descriptions, and analysis of borehole geophysical logs was used to refine the previously published hydrogeologic framework of Pleistocene and Cretaceous unconsolidated sediments in the area, including delineation of a previously undefined hydrogeologic unit between the Magothy aquifer and the Raritan confining unit, herein named the “upper Raritan aquifer.” The upper Raritan aquifer was first recognized in southeastern Nassau County from an analysis of about 50 closely spaced boreholes with high-resolution core descriptions and gamma-ray (gamma) logs. Further analysis of borehole logs across the study area indicated that the upper Raritan aquifer was also present in Kings and Queens Counties. Nuclear magnetic resonance (NMR) logging was used for the first time on Long Island to provide estimates of the hydraulic properties of the major aquifer and confining units. Unlike other geophysical logs that record responses to the rock matrix and fluid properties and are strongly dependent on mineralogy, NMR logs record responses to the presence of hydrogen protons in the formation fluid to determine water fraction and pore-size distribution. NMR log analysis provided estimates of the clay-bound, capillary-bound, and mobile water fractions and hydraulic conductivity of aquifers and confining units penetrated by five wells in Nassau County. Pumpage for public-supply and industrial wells on Long Island began in the 1870s with small, localized suppliers of populated areas in Kings and Queens Counties. By 1904–16, pumpage for public water supply in Kings County averaged 21 million gallons per day, and averaged 37 million gallons per day in Queens County, mostly from the upper glacial aquifer. Saltwater intrusion was reported as early as the beginning of the 20th century and included the upper glacial-Jameco-Magothy and Lloyd-North Shore aquifer systems. By 1936, pumping in central Kings County created a major cone of depression in the water table extending to the south shore of much of Kings County and into southwestern Queens County. Saltwater intrusion has caused the shutdown of public-supply wells in Kings, Queens, and Nassau Counties. A large saltwater intrusion wedge in the Lloyd aquifer was indicated in southern Queens County in the early part of the 20th century, and the saltwater interface may have been onshore predevelopment. Most of Kings and Queens Counties are intruded with saltwater in both the upper glacial-Jameco-Magothy and Lloyd-North Shore aquifers systems. Saltwater increased during the 20th century and continues to increase to the present (2023) in the Lloyd-North Shore aquifer system in Great Neck and Manhasset Neck in northern Nassau County. A major wedge of saltwater intrusion in the upper glacial-Jameco-Magothy aquifer in southwestern Nassau County appears to be increasing.

New York↗
USGS2025

The GorDAS Distributed Acoustic Sensing experiment above the Cascadia locked zone and subducted Gorda Slab

The southernmost portion of the Cascadia Subduction zone in Northern California produces high rates of moderate and large earthquakes owing to subduction of the Gorda slab and deformation associated with the Mendocino Triple Junction. Distributed Acoustic Sensing (DAS) is rapidly advancing as a method for detecting earthquakes and imaging crustal structure. We have begun a long-term DAS monitoring experiment on buried telecom fiber in Arcata, California, with the goal of increasing the available recordings of moderate to large earthquakes as well as imaging seismogenic structures. We have recorded over a year's worth of data, including most aftershocks of the 2022 M w 6.4 Ferndale earthquake, though not the mainshock itself. The dataset includes numerous magnitude 3.5 and larger earthquakes including the 2023/01/01 M w 5.4 Rio Dell earthquake. Here we present initial results comparing an earthquake detection algorithm, run in real-time on the processing unit of the interrogator system, with both the ShakeAlert earthquake early warning system as well as a post-processed earthquake catalog developed with deep-learning phase-picker algorithms. The rapid onboard processing of the detector demonstrates the potential utility of DAS-based edge computing for earthquake early warning. We also verify the quality of the strain waveforms both in terms of peak amplitudes and waveform similarity using about five months of nodal seismometer data. These instruments were deployed roughly every 300 m along the ~15km long cable and validate large variations in peak strain over short distances that are seen in the DAS data. All data from time windows surrounding both the local and teleseismic earthquakes are publicly available, which will improve our understanding of both the performance of DAS systems in moderate earthquakes and earthquake hazards associated with the Gorda subduction zone.

California↗
USGS2026

Detecting earthquakes in noisy real-time GNSS data with deep learning for improved PGD magnitude estimation

To disseminate accurate and useful warnings, earthquake early warning (EEW) systems must quickly determine the size and location of an earthquake to estimate expected shaking. Traditional seismic‐based algorithms tend to underestimate the true magnitudes of large earthquakes, a phenomenon known as magnitude saturation. This limitation motivated the recent inclusion of Global Navigation Satellite Systems (GNSS) data into the U.S. Geological Survey’s ShakeAlert EEW system with the Geodetic First Approximation of Size and Time (GFAST) algorithm because GNSS data do not saturate with large ground motions. However, the noise levels of GNSS data are very high compared with traditional seismic data, which obscures P ‐wave arrivals and can result in less accurate magnitude estimations if displacement amplitudes are low, such as for lower magnitude earthquakes or large source–station distances. In this study, we develop a deep‐learning model that detects earthquakes in GNSS data and use the Ridgecrest, California, earthquake sequence as a case study to demonstrate how the model could act as a filter to reduce the amount of low‐quality data that enters an algorithm like GFAST. To preserve our limited real earthquake data for model inference, we generated a training dataset composed of >700,000 synthetic displacement waveforms. We combined the synthetic waveforms with real‐time GNSS noise to produce realistically noisy training waveforms and then tested our model on additional synthetic data and performed inference using the real data that were held back. We discuss the performance of our trained model on both the unseen synthetic data and real inference data. Our model can be used to selectively filter only high‐quality data where an earthquake signal is observed for input into an algorithm like GFAST (outperforming a simple signal‐to‐noise ratio–based filter) to reduce the error in GFAST’s real‐time earthquake magnitude estimations.

California↗
USGS2025

Colored shaded-relief bathymetry and acoustic backscatter of Lake Sammamish, Washington

Evidence of strong earthquakes (such as underwater landslides and associated deposits) may be recorded within the lacustrine sediments of Pacific Northwest lakes. The floor of Lake Sammamish, Wash., an approximately 11 kilometer (6.8 mile) long, 2 kilometer (1.2 mile) wide, and 35 meter (114.8 feet) deep lake located in a populated region just east of Seattle, was mapped by the U.S. Geological Survey in November of 2021 to search for evidence of past earthquakes. Mapping was conducted using a SWATHplus-M 234-kHz interferometric side-scan sonar system was pole-mounted on the U.S. Geological Survey research vessel Parke Snavely, and the system collected full-coverage bathymetric and acoustic backscatter data, which were processed to 2-meter spatial resolution. Two maps were created, a colored shaded-relief bathymetric map showing lake floor morphology (sheet 1), and an acoustic-backscatter map showing backscatter intensities (sheet 2). The results may then be utilized together to investigate past earthquake activity.

Washington↗
USGS2023

WellSTIC: A cost-effective sensor for performing point dilution tests to measure groundwater velocity in shallow aquifers

Many individual measurement points are required to characterize groundwater velocity within an aquifer. Groundwater velocity is most commonly measured using a network of >5 cm diameter monitoring wells, which, if not already present at a site, are expensive and labor-intensive to install. Drive-point piezometers—simple, cost-effective wells that can be installed by hand—are a common tool for sampling groundwater in shallow, alluvial aquifers, but most groundwater velocity measurement techniques require equipment that is too large for these narrow (usually <2 cm inside diameter) piezometers. In this technical note, we introduce a low-cost sensor and well packer system (<$90 USD) for performing point dilution tests in narrow piezometers. Field data show that the magnitude of groundwater velocity measured with this technique agrees with velocities computed from natural gradient tracer tests. Additionally, with proper calibration, these sensors can be used to continuously monitor in-well specific conductance, either during inter-well tracer tests with saline tracers or for water quality monitoring. This system is a viable tool for rapid assessment of the magnitude of groundwater velocity in shallow aquifers.

Water Resources Research↗
USGS2024

Separating signals in elevation data improves supervised machine learning predictions for hydrothermal favorability

A recent study identified topography (land surface elevation above sea level) as an important input dataset (feature) for predicting the location of hydrothermal systems in the Great Basin in Nevada. Yet, topography is generally a result of more than one geological process and may consequently contain multiple distinct signals. For example, the geologic evolution of the Great Basin has produced both crustal thickening (i.e., regional-scale trends in elevation) and thinning via Basin and Range extensional faulting (i.e., valley-scale topographic relief). We postulate that these geologic processes may affect the occurrence of hydrothermal systems differently. Therefore, we separate the regional trend from the valley-scale signal in the Great Basin, and then use them separately to evaluate the importance of each as predictors for hydrothermal favorability. Our prior work applying supervised machine learning (ML) using the data from the Nevada Machine Learning Project demonstrated that employing a training strategy that randomly selects negative training sites produces better performing models for predicting hydrothermal favorability than a training strategy that uses expert-selected negatives. The models created using both training strategies exhibited a west-east geographic trend in the predictions for the favorability of hydrothermal resources. These models generally predicted higher favorability in western Nevada and lower favorability in eastern Nevada. This west-east trend in predicted favorability correlates with elevation across the Great Basin, which trends higher from west to east. By separating the original elevation feature into distinct features for elevation trend (i.e., regional-scale topography) and detrended elevation (i.e., valley-scale or local relative topography), we find that models using the separated topographic signals consistently outperform competing models that use the original elevation feature. Although western Nevada still exhibits higher favorability than eastern Nevada, using separated signals for regional elevation and local structure reduces the west-east prediction trend in the region and emphasizes structures associated with hydrothermal upflow. This work emphasizes how carefully engineering features to represent geological conditions relevant to hydrothermal systems allows ML algorithms to detect important patterns for predicting hydrothermal resource favorability and leads to better model performance.

Conference Paper↗
USGS2024

Hydrogeologic conceptual model of groundwater occurrence and brine discharge to the Dolores River in the Paradox Valley, Montrose County, Colorado

Salinity, or total dissolved solids (TDS), of the Colorado River is a major concern in the southwestern United States where the river provides water to about 40 million people for municipal and industrial use and is used to irrigate about 5.5 million acres of land. Much of the salinity in the Colorado River Basin is derived from natural interactions of surface water and groundwater with various geologic materials (rocks, soils, and alluvial deposits). The Dolores River in southwest Colorado is a major tributary of the Colorado River that historically accounts for about 6 percent of the salinity load to the Upper Colorado River Basin with the Paradox Valley being the primary source of salinity to the Dolores River. The Paradox Valley, one of several salt-anticline valleys in the region, is a fault-bounded topographic basin aligned with and exposing an underlying salt-anticline core. Salt deposits in the Pennsylvanian Paradox Formation of the Hermosa Group form an elongated salt diapir oriented northwest to southeast that is up to 12,000 feet (ft) thick beneath the present valley floor. Surface erosion, groundwater circulation, and weathering during Tertiary and Quaternary valley formation contributed to development of a cap rock, collapse features, breccia, and brine at the top of the exposed salt diapir. Today (2023), brine occurring in the brecciated cap rock and underlying salt deposits is in hydraulic connection with an overlying freshwater alluvial aquifer, and depending on seasonal river stage and hydrologic conditions, the brine discharges to the Dolores River causing the observed increase in salinity as the river crosses the Paradox Valley. To reduce salinity concentrations in the Dolores River, the Bureau of Reclamation (Reclamation) operates the Paradox Valley Unit (PVU). The PVU project consists of nine shallow brine pumping wells near the Dolores River and one deep disposal well where the brine is injected for disposal. When operational, the PVU pumping wells extract brine from the base of the alluvial aquifer that is piped and injected into a deep disposal well about 3 miles southwest of the PVU. The PVU became fully operational July 1, 1996, and by 2015, operation of the PVU had reduced salinity concentrations in the Dolores River by as much as 70 percent compared to pre-PVU conditions. In response to a 4.5 magnitude earthquake, injection operations, and thus PVU pumping, were ceased from March 2019 to June 2022. A trial period of PVU operation began in June 2022 with a reduced injection rate, and thus PVU pumping rate, of about two-thirds capacity to gather additional information and guide future operational decisions. In cooperation with Reclamation, the U.S. Geological Survey (USGS) developed this report to present the current (2023) understanding of groundwater and brine occurrence and discharge to the Dolores River in the Paradox Valley. Results from the compilation of spatial datasets, groundwater sampling and age dating, and aquifer tests are presented to provide improved understanding of the Paradox Valley hydrogeology, to supply datasets for a numerical groundwater-flow and brine-transport model, and to support future operations of the PVU. The hydrogeologic data provided herein, along with the most recent loading analysis for the Dolores River in the Paradox Valley, and a previous conceptual model for brine discharge to the river are used to present a conceptual understanding of groundwater occurrence in the Paradox Valley.

Colorado↗
USGS1998

Methods and guidelines for effective model calibration; with application to UCODE, a computer code for universal inverse modeling, and MODFLOWP, a computer code for inverse modeling with MODFLOW

This report documents methods and guidelines for model calibration using inverse modeling. The inverse modeling and statistical methods discussed are broadly applicable, but are presented as implemented in the computer programs UCODE, a universal inverse code that can be used with any application model, and MODFLOWP, an inverse code limited to one application model. UCODE and MODFLOWP perform inverse modeling, posed as a parameter-estimation problem, by calculating parameter values that minimize a weighted least-squares objective function using nonlinear regression. Minimization is accomplished using a modified Gauss-Newton method, and prior, or direct, information on estimated parameters can be included in the regression. Inverse modeling in many fields is plagued by problems of instability and nonuniqueness, and obtaining useful results depends on (1) defining a tractable inverse problem using simplifications appropriate to the system under investigation and (2) wise use of statistics generated using calculated sensitivities and the match between observed and simulated values, and associated graphical analyses. Fourteen guidelines presented in this work suggest ways of constructing and calibrating models of complex systems such that the resulting model is as accurate and useful as possible.

Water-Resources Investigations Report↗
USGS2026

A three-dimensional geologic framework model of the northern Great Plains region of Montana, North Dakota, South Dakota, and Wyoming, USA

This report presents a new three-dimensional geologic framework model (GFM) of the northern Great Plains region, encompassing parts of Montana, North Dakota, South Dakota, and Wyoming. The model provides a regionally consistent, geographic information system (GIS)-ready representation of Phanerozoic sedimentary strata, major fault systems, and Precambrian basement geometry across two sedimentary basins and adjacent uplifts. More than 300,000 geologic and geophysical data inputs were synthesized to model 41 stratigraphic horizons and 47 faults, yielding an internally coherent, sealed-volume interpretation of the subsurface. The modeling workflow developed for this study demonstrates an efficient and scalable approach for constructing basin-to regional-scale GFMs in geologically complex and data-variable settings. Although model fidelity varies with data density and quality, the resulting geometry is broadly consistent with 1:500,000-scale geologic mapping and highlights areas where additional geologic study is most needed. The three-dimensional GFM provides a foundational framework to support groundwater, energy, and mineral resource assessments, and offers a transferable methodology for potential future U.S. Geological Survey efforts to build large-area subsurface models in underexplored regions of the United States.

Montana, North Dakota, South Dakota, Wyoming↗
USGS2025

Preventing overfitting when using tree-based methods for mapping hydrothermal favorability

Ensemble tree-based algorithms are robust tools for estimating sparsely distributed resources with non-linear dependencies (e.g., hydrothermal systems). These algorithms naturally accommodate the threshold conditions necessary to enable and support hydrothermal systems (e.g., having sufficient heat and permeability) and are simpler than many other non-linear machine learning strategies (e.g., artificial neural networks), which is an advantage when working with few labeled examples from which to learn. In previous work, we used eXtreme Gradient Boosting (XGBoost) to produce regional prediction and uncertainty maps of hydrothermal favorability; however, recent studies suggest that, even when properly applied, XGBoost has some risk of overfitting when there are few labeled examples from which to learn. To evaluate overfitting when constructing hydrothermal favorability maps with tree-based methods, we compare XGBoost with Extremely Randomized Trees (ExtraTrees), another ensemble tree-based algorithm that has the potential to underfit when using few labeled examples. We hold all other modeling parameters constant, resulting in two contrasting favorability maps of conventional geothermal resources for the Great Basin. Our results indicate that ExtraTrees demonstrably reduces overfitting compared with XGBoost. After considering overall performance, we conclude that ExtraTrees provides a more suitable modeling approach than XGBoost for the purposes of conventional hydrothermal resource assessments.

Conference Paper↗
USGS2025

Comparing magmatism and hydrothermal alteration using magnetic modelling and stable isotopes at the Clementine porphyry copper prospect, Montana, USA

Recent mapping of the underexplored Clementine prospect in southwestern Montana has revealed evidence of hydrothermal alteration and mineralized breccia vein gossan interpreted to represent the upper expression of a Cretaceous, sediment-hosted copper porphyry system. The prospect is at the nexus of several Cretaceous granites, including the pre-mineralization Butte Granite and Big Hole Canyon plutons and local pre- to post-mineralization granite intrusions. Here, 3D magnetic inversions and stable isotope data are used to evaluate the spatial and genetic relationship of mineralization and Cretaceous magmatism. Magnetic inversions reveal a zone of high magnetic susceptibility beneath the prospect that is related to an exposure of unaltered, likely post-mineralization granite. The granite appears to connect to the Big Hole Canyon pluton at depth, suggesting it is a late-stage differentiate of the cooling, pre-mineralization pluton that may have been one of several potential heat sources for the mineral system at Clementine. This is supported by carbon isotope values of graphite that indicate organic material in shale of the Cretaceous Kootenai Formation was subject to metamorphism. Preliminary light hydrogen isotope values of actinolite hydrothermal orbs suggest formation following magmatic outgassing during thermal advection from an underlying intrusion.

Montana↗
USGS2024

Uncertainty in ground-motion-to-intensity conversions significantly affects earthquake early warning alert regions

We examine how the choice of ground‐motion‐to‐intensity conversion equations (GMICEs) in earthquake early warning (EEW) systems affects resulting alert regions. We find that existing GMICEs can underestimate observed shaking at short rupture distances or overestimate the extent of low‐intensity shaking. Updated GMICEs that remove these biases would improve the accuracy of alert regions for the ShakeAlert EEW system for the West Coast of the United States. ShakeAlert uses ground‐motion prediction equations (GMPEs), which calculate spatial distributions of peak ground acceleration (PGA) and peak ground velocity (PGV) from earthquake source estimates, combined with GMICEs to translate GMPE output into modified Mercalli intensity (MMI). We find significant epistemic uncertainty in alert distances; near‐source MMI estimates from different GMICEs can differ by over 1 MMI unit, and MMI extents used for public EEW alerts can differ by hundreds of kilometers for larger magnitude earthquakes ( M ∼6.5+). We use a catalog of “Did You Feel It?” shaking reports to evaluate how well GMICEs predict observed shaking. Our preferred GMICE is the one that computes MMI using PGV for high intensities and transitions to using PGA for nondamaging intensities. These results motivate updating GMICE relationships more generally, including in ShakeMap applications.

The Seismic Record↗
USGS2026

Detecting snow avalanche activity using infrasound: Hooker Valley, New Zealand

Snow avalanches pose considerable hazards to people and infrastructure in alpine environments. Traditional avalanche monitoring relies on meteorological data and visual observations, which can be limited in scope and timeliness. Infrasound offers a promising complementary monitoring tool by detecting the low-frequency sound waves generated by avalanches. Here, we present infrasound and camera observations during a 50-day field campaign in the Hooker Valley of Aoraki/Mount Cook National Park, New Zealand. Our study detected seven avalanches with the cameras, whereas the infrasound system identified only one of these events, which was the largest and occurred under conditions that likely favoured infrasound propagation. The infrasound system recorded numerous other events not captured by the cameras, indicating the benefit of further investigation to determine their sources. These findings highlight the potential of infrasound technology for detecting avalanches and providing broad spatial coverage, capturing events in areas not monitored by cameras, while also showcasing limitations in infrasound capabilities. The limited detection of smaller avalanches underscores the opportunity for further research to enhance detection capabilities and understand environmental influences such as snow cover and wind noise. Overall, this study emphasises the utility of multidisciplinary monitoring techniques to improve avalanche detection in alpine environments.

Hooker Valley↗
USGS2026

Rapid earthquake magnitude classification via P-wave strains from borehole strainmeters and Distributed Acoustic Sensing

Distributed Acoustic Sensing (DAS) offers a promising approach for earthquake early warning (EEW) in settings where seismic networks are costly to maintain. By repurposing fiber-optic cables as dense strainmeter arrays, DAS enables real-time earthquake detection wherever those fibers are accessible. However, poor azimuthal coverage and challenges in estimating magnitude from strain measurements remain key hurdles in applying for earthquake monitoring. Here, we develop a machine learning method to distinguish large (M≥5.4) earthquakes from smaller ones within the first 4 seconds of a strain waveform after a P-wave arrival without determining location. Using ensemble decision tree models trained on borehole strainmeter data (3.5≤M≤7.1) and tested on onshore DAS waveforms (including the 2024 M7 Offshore Cape Mendocino earthquake), we find that low-frequency (0.2–0.5 Hz) continuous wavelet transform coefficients are the strongest predictors of magnitude, in addition to strain amplitude. Both DAS and borehole strainmeters effectively capture long-period strain signals, making these findings valuable for EEW systems. Our method shows high precision compared to the real-time EEW system, ShakeAlert®, supporting the position that DAS is a viable technology for earthquake monitoring and magnitude classification.

California↗