SEARCH · USGS Science

Results for “Special Paper”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 631 records · Page 35Linked to original sources

USGS1942

Returns from banded birds: Some longevity records of wild birds

Records indicating the possible life-span of birds in the wild are accumulating in the return file for banded birds. In Bird-Banding , vol. viii, 1937, p. 52-65, a number of these were published. The expressed interest in this phase of bird life, together with the increased amount of material, seem to justify further publication on this subject. These papers by no means exhaust the subject; probably as many more equally interesting records could be found. As in the previous article, a bird must have been at least five years old at its latest report to be included in the list. In the case of Common Terns, the minimum has had to be made ten years, and few ducks less than ten years old have been included. No special effort has been made to 'dig out' the complete records of birds that have returned several times to the banding station, but when the record has been supplied on the return card by the operator it has been used.

Bird-Banding↗

USGS1981

Chemical composition of sedimentary rocks in California and Hawaii

A compilation of published chemical analyses of sedimentary rocks of the United States was undertaken by the U.S. Geological Survey in 1952 to make available scattered data that are needed for a wide range of economic and scientific uses. About 20,000-25,000 chemical analyses of sedimentary rocks in the United States have been published. This report brings together 2,312 of these analyses from California and Hawaii. The samples are arranged by general lithologic characteristics and locality. Indexes of stratigraphy, rock name, commercial uses, and minor elements are provided. The sedimentary rocks are classified into groups and into categories according to the chemical analyses. The groups (A through F2) are defined by a system similar to that proposed by Brian Mason in 1952, in which the main parameters are the three major components of sedimentary rocks: (1) uncombined silica, (2) clay (R203 ? 3Si02 ? nH20), and (3) calcium-magnesium carbonate. The categories are based on the degree of admixture of these three major components with other components, such as sulfate, phos- phate, and iron oxide. Common-rock, mixed-rock, and special-rock categories apply to rocks consisting of 85 percent or more, 50-84 percent, and less than 49 percent, respectively, of the three major components combined. Maps show distribution of sample localities by States; triangular diagrams show the lithologic characteristics and classification groups. Cumulative-frequency curves of each constituent in each classification group of the common-rock and mixed-rock categories are also included. The numerous analyses may not adequately represent the geochemical nature of the rock types and formations of the region because of sampling bias. Maps showing distribution of sample localities indicate that many of the localities are in areas where, for economic or other reasons, special problems attracted interest. Most of the analyzed rocks tended to be fairly simple in composition - mainly mixtures of just two of the three major components or a mixture of these and a fourth component such as phosphate, gypsum, or iron oxide.

Professional Paper↗

USGS1971

The acoustic streamflow-measuring system on the Columbia River at The Dalles, Oregon

Records of discharge on the Columbia River at The Dalles, Oreg., are vital to the management of the complex water-development projects in the Columbia River basin. Accurate discharge figures are needed for consistent day-to-day management and are required to meet treaty obligations with Canada. Because dams have been erected that completely control watersurface elevations at nearly all points in the river from Bonneville Dam to the Canadian border, conventional stream-gaging methods, used historically, are no longer adequate. Consequently, new techniques must be used to obtain the accurate discharge records required--records that are computed independently from the hydroelectric operation logs and that stand alone as the recognized flow records in the basin. This need for an accurate, independent gaging system has been met by the installation of an acoustic streamflow-measuring system in the river channel at The Dalles, Oreg. This device provides an index of water velocity by measuring the difference in traveltimes of acoustic pulses transmitted through the water in each direction along a diagonal path across the river. The flow of water along the path increases the speed of one signal and retards the speed of the other. The difference in time of travel is related linearly to the water velocity along the path. The velocity index and river stage are used as a two-variable index in the computation of flow. These variables, correlated against current-meter measurements made with specialized boat equipment, provide a reliable basis for computations of instantaneous and daily mean discharges. Installation of this sytem, which is the first application of an AVM (acoustic velocity meter) in a large natural channel, was completed in April 1969. It has been in continuous operation since that date. Performance has been satisfactory, and similar installations at other key points in the Columbia River basin are now under consideration. This paper covers the general theory behind acoustic velocity meters, tracing development from earlier concepts to the present commercially available system. Conclusions are that the AVM can now be considered as an operational instrument which permits accurate gaging of river discharge at many sites where conventional stream-gaging procedures have proved to be unreliable.

Oregon↗

USGS2012

Task committee on experimental uncertainty and measurement errors in hydraulic engineering: An update

As part of their long range goals for disseminating information on measurement techniques, instrumentation, and experimentation in the field of hydraulics, the Technical Committee on Hydraulic Measurements and Experimentation formed the Task Committee on Experimental Uncertainty and Measurement Errors in Hydraulic Engineering in January 2003. The overall mission of this Task Committee is to provide information and guidance on the current practices used for describing and quantifying measurement errors and experimental uncertainty in hydraulic engineering and experimental hydraulics. The final goal of the Task Committee on Experimental Uncertainty and Measurement Errors in Hydraulic Engineering is to produce a report on the subject that will cover: (1) sources of error in hydraulic measurements, (2) types of experimental uncertainty, (3) procedures for quantifying error and uncertainty, and (4) special practical applications that range from uncertainty analysis for planning an experiment to estimating uncertainty in flow monitoring at gaging sites and hydraulic structures. Currently, the Task Committee has adopted the first order variance estimation method outlined by Coleman and Steele as the basic methodology to follow when assessing the uncertainty in hydraulic measurements. In addition, the Task Committee has begun to develop its report on uncertainty in hydraulic engineering. This paper is intended as an update on the Task Committee's overall progress. Copyright ASCE 2005.

Conference Paper↗

USGS2003

Using semipermeable membrane devices (SPMDs) to assess the toxicity and teratogenicity of aquatic amphibian habitats

Environmental contamination has been suspected of being partially responsible for recent declines in amphibian populations. It is often not feasible to identify all of the compounds in an environment, nor the concentrations in which they are present. SPMDs are passive sampling devices that uptake lipophilic compounds from the environment in a manner similar to aquatic organisms. The extracts from the SPMDs, therefore, contain a composite sample of the compounds that are present in the environment. In this paper, we outline the methods from studies in which we have used extracts from SPMDs in toxicity tests on amphibian larvae. Using SPMD extracts makes it possible to establish potential links between amphibian deformities and declines and environmental contamination by lipophilic compounds.

ASTM Special Technical Publication↗

USGS1960

Zones and zonal variations in welded ash flows

Welded tuffs are recognized as special parts of ash flows, other pyroclastic flows, or, more rarely, air-fall deposits. Ash flows may be emplaced at any temperature below a maximum eruption temperature. Those emplaced above a minimum welding temperature may show any and all degrees of welding and crystallization.

Professional Paper↗

USGS2014

An ontology design pattern for surface water features

Surface water is a primary concept of human experience but concepts are captured in cultures and languages in many different ways. Still, many commonalities exist due to the physical basis of many of the properties and categories. An abstract ontology of surface water features based only on those physical properties of landscape features has the best potential for serving as a foundational domain ontology for other more context-dependent ontologies. The Surface Water ontology design pattern was developed both for domain knowledge distillation and to serve as a conceptual building-block for more complex or specialized surface water ontologies. A fundamental distinction is made in this ontology between landscape features that act as containers (e.g., stream channels, basins) and the bodies of water (e.g., rivers, lakes) that occupy those containers. Concave (container) landforms semantics are specified in a Dry module and the semantics of contained bodies of water in a Wet module. The pattern is implemented in OWL, but Description Logic axioms and a detailed explanation is provided in this paper. The OWL ontology will be an important contribution to Semantic Web vocabulary for annotating surface water feature datasets. Also provided is a discussion of why there is a need to complement the pattern with other ontologies, especially the previously developed Surface Network pattern. Finally, the practical value of the pattern in semantic querying of surface water datasets is illustrated through an annotated geospatial dataset and sample queries using the classes of the Surface Water pattern.

Conference Paper↗

USGS1996

Management of northern prairies and wetlands for the conservation of neotropical migratory birds

Grasslands and wetlands of the northern prairies provide important breeding habitat for a number of birds. Deciding which species deserve most attention in managing those habitats depends, in part, on the importance of the area to the species. Many species in northern prairies are more common elsewhere and need no special consideration in that area. Several species, however, are critically dependent on the prairies. These species merit particular attention if protection of biodiversity is a goal. Both grasslands and wetlands in the northern prairies have been extensively converted for agricultural use, which has reduced the value of these habitats for breeding birds. Most land-use changes took place before monitoring programs for birds began, so quantitative assessments of changes in avian populations are lacking. This paper discusses the status of bird populations in the northern prairies, key upland and wetland habitats, effects of common management practices, and issues that specifically result from a landscape perspective. Most management practices are employed for other objectives; consequences to nongame birds are incidental, but vitally important to some species.

General Technical Report↗

USGS2022

A review of the microtremor horizontal-to-vertical spectral ratio (MHVSR) method

The single-station microtremor horizontal-to-vertical spectral ratio (MHVSR) method was initially proposed to retrieve the site amplification function and its resonance frequencies produced by unconsolidated sediments overlying high-velocity bedrock. Presently, MHVSR measurements are predominantly conducted to obtain an estimate of the fundamental site frequency at sites where a strong subsurface impedance contrast exists. Of the earthquake site characterization methods presented in this special issue, the MHVSR method is the furthest behind in terms of consensus towards standardized guidelines and commercial use. The greatest challenges to an international standardization of MHVSR acquisition and analysis are (1) the what — the underlying composition of the microtremor wavefield is site-dependent, and thus, the appropriate theoretical (forward) model for inversion is still debated; and (2) the how — many factors and options are involved in the data acquisition, processing, and interpretation stages. This paper reviews briefly a historical development of the MHVSR technique and the physical basis of an MHVSR (the what ). We then summarize recommendations for MHVSR acquisition and analysis (the how ). Specific sections address MHVSR interpretation and uncertainty assessment.

Journal of Seismology↗

USGS2023

60 years and beyond of Reviews of Geophysics

Reviews of Geophysics is an AGU journal, first established in February 1963. It is a hybrid open access invitation-only journal that publishes comprehensive review articles across various disciplines within the Earth and Space Sciences. The selection criteria are rigorous and many submissions are declined without review. The journal is the highest ranked in the fields of Geochemistry and Geophysics, with a high Journal Impact Factor (JIF 2021 = 24.9), which is indicative of its high visibility and influence within the scientific community. The journal's published review papers, beyond a mere summary of literature, provide crucial context for current work, and establish the framework for comprehensive understanding of research progress, challenges, and interconnections between different communities, so that research may be appreciated by a broad audience. We emphasize the importance of publishing studies that provide a comprehensive overview and synthesis of the current state of knowledge in a field, especially in the case of geophysics, where knowledge is rapidly developing, increasing and becoming more specialized.

Reviews of Geophysics↗

USGS1975

Paleotectonic investigations of the Pennsylvanian System in the United States, Part I: Introduction and regional analyses of the Pennsylvanian System

The Pennsylvanian is the fourth geologic system to be analyzed and synthesized by geologists of the U.S. Geological Survey in the form of a paleotectonic study covering the conterminous United States. Earlier investigations were of the Jurassic, Triassic, and Permian Systems. Results were published as Miscellaneous Geologic Investigation Maps I-175, I-300, and I-450 and in Professional Paper 515. The objective of these investigations is to provide in graphic form the factual basis for recognition of tectonic events of each system on a countrywide scale. The maps in this publication depict rock thickness, generalized lithology, ancient geography, and other regional relations of the Pennsylvanian System. Method of preparation of the maps, the stratigraphic limits of the map units, and various stratigraphic and structural features and their probable tectonic significance are discussed. Pennsylvanian data were largely compiled between 1961 and 196 by 16 geologists, including the late Harold R. Wanless, who covered the five eastern regions and contributed to several of the special studies. The areas of responsibility of the cooperating geologists are indicated in figure 1. Work in Kansas was done by Gary F. Stewart, of the Kansas Geological Survey. Results of this investigation are presented in three units. Part I comprises an introduction and 17 chapters, each describing and discussing one of the regions in which the conterminous United States was divided for purposes of study and mapping. Part II is a synthesis of Pennsylvanian history to accompany interpretive maps of the five divisions of the Pennsylvanian System treated in this publication; it also includes a series of chapters on depositional environments, climatic conditions, and economic products of the system. The final section of part II is devoted to an index of localities and sources used in construction of the principal maps of this publication. Part III consists of the plates on which are presented the major maps and sections.

Professional Paper↗

USGS1999

Giant panda (Ailuropoda melanoleuca) population dynamics and bamboo (subfamily Bambusoideae) life history: a structured population approach to examining carrying capacity when the prey are semelparous

The giant panda, Ailuropoda melanoleuca, is a highly specialized Ursid whose diet consists almost entirely of various species of bamboo. Bamboo (Bambusoideae) is a grass subfamily whose species often exhibit a synchronous semelparity. Synchronous semelparity can create local drops in carrying capacity for the panda. We modeled the interaction of pandas and their bamboo food resources with an age structured panda population model linked to a natural history model of bamboo biomass dynamics based on literature values of bamboo biomass, and giant panda life history dynamics. This paper reports the results of our examination of the interaction between pandas and their bamboo food resource and its implications for panda conservation. In the model all panda populations were well below the carrying capacity of the habitat. The giant panda populations growth was most sensitive to changes in birth rates and removal of reproductive aged individuals. Periodic starvation that has been documented in conjunction with bamboo die-offs is probably related to the inability to move to other areas within the region where bamboo is still available. Based on the results of this model, giant panda conservation should concentrate on keeping breeding individuals in the wild, keep corridors to different bamboo species open to pandas, and to concentrate research on bamboo life history.

Ecological Modelling↗

USGS2011

Bias estimation for the Landsat 8 operational land imager

The Operational Land Imager (OLI) is a pushbroom sensor that will be a part of the Landsat Data Continuity Mission (LDCM). This instrument is the latest in the line of Landsat imagers, and will continue to expand the archive of calibrated earth imagery. An important step in producing a calibrated image from instrument data is accurately accounting for the bias of the imaging detectors. Bias variability is one factor that contributes to error in bias estimation for OLI. Typically, the bias is simply estimated by averaging dark data on a per-detector basis. However, data acquired during OLI pre-launch testing exhibited bias variation that correlated well with the variation in concurrently collected data from a special set of detectors on the focal plane. These detectors are sensitive to certain electronic effects but not directly to incoming electromagnetic radiation. A method of using data from these special detectors to estimate the bias of the imaging detectors was developed, but found not to be beneficial at typical radiance levels as the detectors respond slightly when the focal plane is illuminated. In addition to bias variability, a systematic bias error is introduced by the truncation performed by the spacecraft of the 14-bit instrument data to 12-bit integers. This systematic error can be estimated and removed on average, but the per pixel quantization error remains. This paper describes the variability of the bias, the effectiveness of a new approach to estimate and compensate for it, as well as the errors due to truncation and how they are reduced.

Conference Paper↗

USGS1981

Guides to some volcanic terranes in Washington, Idaho, Oregon, and Northern California

This guidebook arose out of a series of field trips held in conjunction with the Pacific Northwest American Geophysical Union meeting held in Bend, Oregon, September 1979. The PNAGU meeting included special volcanology sessions planned by William I. Rose, Jr., Bruce A. Nolf, amd David A. Johnston. Publication of the guidebook volume was originally planned for early 1980 by the Oregon Department of Geology and Mineral Industries (DOGAMI). Inevitable delays, subsequent scheduling problems, and the death of Dave Johnston in the May 18 eruption of Mount St. Helens led to this publication as a USGS Circular. This circular differs from typical U.S. Geological Survey compilations in that not all these papers have been examined by the Geologic Names Committee of the Survey. This Committee is charged with ensuring consistent usage of formational and other stratigraphic names in U.S. Geological Survey publications. Because many of the contributions are from workers outside the Survey, review by the Geologic Names Committee would have been inappropriate. Each author provided camera-ready pages, and the articles have not been edited for uniformity of style or usage. The contributions are generally ordered so as to describe the areas from north to south. Typically, the roadlog comes after the descriptive article except in the case of the Medicine Lake Highland articles, for which the road log is first and several topical contributions follow.

California, Idaho, Oregon, Washington↗

USGS2024

Recent advances in characterizing the crustal stress field and future applications of stress data: Perspectives from North America

The stress field controls patterns of crustal deformation, including which faults are likeliest to cause earthquakes or transmit fluids. Since the 1950s, maps of maximum horizontal stress ( S Hmax ) orientations have advanced dramatically, and the style of faulting (relative principal stress magnitudes) has recently been mapped in some regions as well. This perspectives paper summarizes developments in characterizing stress orientations and (relative) magnitudes, including new seismic and borehole methods, as well as progress in identifying the causes of stress variations. Despite these advances, adding far more spatiotemporal detail would allow geoscientists to address many of today's key challenges regarding natural hazards, energy development, and geodynamics. In particular, it is critically important to characterize stress heterogeneity at multiple scales while also recognizing the coherent variability of the stress field. The second part of the paper considers how more detailed stress datasets could prove essential to addressing some of the grand questions in geoscience, including deciphering the poorly understood feedbacks between crustal dynamics and surface processes, improving earthquake and eruption forecasts, and determining the origins and shared properties of plate boundaries.

Geological Society, London, Special Publications↗

USGS1966

U.S. Federal research on fisheries and limnology in the Great Lakes through 1964: an annotated bibliography

The annotated bibliography is preceded by a brief account of the Federal research program in fisheries and limnology in the Great Lakes in 1957-64. The bibliography covers 314 papers by staff members of the Bureau of Commercial Fisheries Biological Laboratory in Ann Arbor, Mich., and 35 by associated scientists with whom the Laboratory had contractual or other cooperative arrangements; included also are patents issued to Laboratory personnel. A roster of Laboratory scientists as of December 31, 1964, is appended.

Special Scientific Report - Fisheries↗

USGS2015

Wildlife specimen collection, preservation, and shipment

Specimens are used to provide supporting information leading to the determination of the cause of disease or death in wildlife and for disease monitoring or surveillance. Commonly used specimens for wildlife disease investigations include intact carcasses, tissues from carcasses, euthanized or moribund animals, parasites, ingested food, feces, or environmental samples. Samples from live animals or the environment (e.g., contaminated feed) in the same vicinity as a mortality event also may be helpful. The type of specimen collected is determined by availability of samples and biological objectives. Multiple fresh, intact carcasses from affected species are the most useful in establishing a cause for a mortality event. Submission of entire carcasses allows observation of gross lesions and abnormalities, as well as disease testing of multiple tissues. Samples from live animals may be more appropriate when sick animals cannot be euthanized (e.g., threatened or endangered species) or for research and monitoring projects examining disease or agents circulating in apparently healthy animals or those not exhibiting clinical signs. Samples from live animals may include collections of blood, hair, feathers, feces, or ectoparasites, or samples obtained by swabbing lesions or orifices. Photographs and videos are useful additions for recording field and clinical signs and conveying conditions at the site. Collection of environmental samples (e.g., feces, water, feed, or soil) may be appropriate when animals cannot be captured for sampling or the disease agent may persist in the environment. If lethal collection is considered necessary, biologists should refer to the policies, procedures, and permit requirements of their institution/facility and the agency responsible for species management (U.S. Fish and Wildlife Service or State natural resource agency) prior to use in the field. If threatened or endangered species are found dead, or there is evidence of illegal take, field personal should contact local wildlife law enforcement authorities immediately and prior to handling the carcass. Prior to collecting samples, it is important to determine the capabilities and submission criteria of the laboratory receiving the samples. Some laboratories may specialize in a limited number of tests, be equipped to accept only certain types of tissues (instead of entire carcasses), or specialize in particular species or group of animals (e.g., reptiles, birds, mammals). Diagnostic laboratories have specific requirements regarding preparation, labeling, and shipping of samples. Adherence to these requirements helps ensure the usefulness of any submitted specimens. Although laboratories may vary in the cost and turnaround times for diagnostic tests, some laboratories may be able to prioritize samples and accommodate accelerated time frames if communicated at the time of submission. Keeping a prepacked kit with basic carcass-collection supplies, including a paper copy of the specimen history form (available for download from the Web sites of most diagnostic laboratories), in the office or vehicle will decrease the chances of forgetting an essential item and decrease response time for arriving at an event.

Techniques and Methods↗

USGS2014

Mineral resource of the month: vermiculite

Vermiculite comprises a group of hydrated, laminar magnesium-aluminum-iron silicate minerals resembling mica. They are secondary minerals, typically altered biotite, iron-rich phlogopite or other micas or clay-like minerals that are themselves sometimes alteration products of amphibole, chlorite, olivine and pyroxene. Vermiculite deposits are associated with volcanic ultramafic rocks rich in magnesium silicate minerals, and flakes of the mineral range in color from black to shades of brown and yellow. The crystal structure of vermiculite contains water molecules, a property that is critical to its processing for common uses. Using a process called exfoliation-in which vermiculite flakes are heated to 900 degrees Celsius or higher, causing water within the flakes to flash to steam and expand-crude vermiculite ore is processed into particles that are eight to 20 times larger. The resulting lightweight material is chemically inert and fire resistant, with low density and low thermal conductivity. It is also odorless, has high liquid absorption capacity and catalytic properties. Because it is lightweight and thermally insulating, vermiculite is used in general building plasters and concrete products, alone or combined with other lightweight aggregates such as perlite. Special plasters, in which vermiculite is combined with binders like gypsum or portland cement, fillers or other additives, provide fire protection and soundproofing. As insulation, exfoliated vermiculite, sometimes treated with a water repellent, is used to fill pores and cavities in masonry construction and hollow blockwork to enhance acoustic properties, fire rating and insulation performance. Exfoliated vermiculite can also be used to produce refractory and insulation concretes and mortars, and to make high-temperature binders for construction materials, gaskets, specialty papers, textiles and vehicle brake linings. Finer grades of exfoliated vermiculite can be used to produce various shapes of insulation pellets, high-temperature insulation, as a primary component in cementitious coatings, and as a filler in inks, paints, plastics and other materials. Vermiculite can absorb liquids such as fertilizers, herbicides and insecticides, which can then be transported as free-flowing solids. It is used in the fertilizer and pesticide markets because of its ability to act as a bulking agent, carrier and extender. In horticulture, exfoliated vermiculite improves soil aeration and moisture retention, and when mixed with peat or other composted materials, such as pine bark, vermiculite produces a good growing medium for plants. As a soil conditioner, exfoliated vermiculite improves aeration in clay-rich soils and water retention in sandy soils, while reducing the likelihood of compaction, cracking and crusting of the soil. For more information on the commercial use of vermiculite, visit minerals.usgs.gov/minerals/ .

Earth↗