A review of the microtremor horizontal-to-vertical spectral ratio (MHVSR) method

S. Molnar; A. Sirohey; J. Assaf; P.-Y. Bard; C. Castellaro; C. Cornou; B. Cox; B. Guillier; B. Hassani; H. Kawase; S. Matsushima; F. J. Sánchez-Sesma; Alan Yong

doi:10.1007/s10950-021-10062-9

USGS · 70236347

A review of the microtremor horizontal-to-vertical spectral ratio (MHVSR) method

S. Molnar·A. Sirohey·J. Assaf·P.-Y. Bard·C. Castellaro·C. Cornou·B. Cox·B. Guillier·B. Hassani·H. Kawase·S. Matsushima·F. J. Sánchez-Sesma·Alan Yong

View original source ↗Export metadata ↓

Abstract

The single-station microtremor horizontal-to-vertical spectral ratio (MHVSR) method was initially proposed to retrieve the site amplification function and its resonance frequencies produced by unconsolidated sediments overlying high-velocity bedrock. Presently, MHVSR measurements are predominantly conducted to obtain an estimate of the fundamental site frequency at sites where a strong subsurface impedance contrast exists. Of the earthquake site characterization methods presented in this special issue, the MHVSR method is the furthest behind in terms of consensus towards standardized guidelines and commercial use. The greatest challenges to an international standardization of MHVSR acquisition and analysis are (1) the what — the underlying composition of the microtremor wavefield is site-dependent, and thus, the appropriate theoretical (forward) model for inversion is still debated; and (2) the how — many factors and options are involved in the data acquisition, processing, and interpretation stages. This paper reviews briefly a historical development of the MHVSR technique and the physical basis of an MHVSR (the what ). We then summarize recommendations for MHVSR acquisition and analysis (the how ). Specific sections address MHVSR interpretation and uncertainty assessment.

Explore related subjects

Journal of Seismology Article

Keep this discovery

Explore connections, maps & timelines

BibTeX RIS

S. Molnar, A. Sirohey, J. Assaf, P.-Y. Bard, C. Castellaro, C. Cornou, B. Cox, B. Guillier, B. Hassani, H. Kawase, S. Matsushima, F. J. Sánchez-Sesma, Alan Yong. 2022-03-16. A review of the microtremor horizontal-to-vertical spectral ratio (MHVSR) method. https://doi.org/10.1007/s10950-021-10062-9

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Site-specific amplifications in Northwestern Turkiye: A generic approach

In this study, we derive generic site amplification functions applicable to Northwestern Türkiye and follow guidance on site classifications established by the United States National Earthquake Hazards Reduction Program (NEHRP). We employ the one-dimensional (1-D) equivalent linear ground response analysis method and focus on recordings from a select suite of free-field strong motion (SM) stations. These particular SM stations are associated with a comprehensive geotechnical site conditions dataset comprising 76 shear-wave velocity profiles. Despite their varying resolutions and depths, this diversity allows for a more representative analysis across different site conditions, enhancing the robustness of our findings. For analyses, we utilize a robust set of global ground motion records, selected from both within and outside of Türkiye, to serve as strong and weak input bedrock motions. Site amplification is determined by propagating these bedrock records through 76 site-specific Afet ve Acil Durum Yönetimi Başkanlığı (AFAD) station profiles and calculating the spectral acceleration ratio between the ground surface and the input motion. Our analyses reveal substantial disparities between the amplification functions derived from 1-D site response analyses using strong and weak input motions. These disparities are central to our analysis and inform the subsequent comparison with site amplification functions reported in the literature. We compare the generic site amplification functions derived in this study with those reported in the literature for regions with similar geological and seismic conditions to Northwestern Türkiye. For example, site amplification functions for NEHRP Site Classes C and D have been documented for Greece and the United States utilizing frequency-dependent methods such as the quarter-wavelength approximation. Our findings reveal that the generic site amplification functions derived in this study exhibit differences in peak amplitudes and predominant frequencies compared to those in the literature, reflecting regional variations in geotechnical and seismic properties. This study represents an initial effort to formulate generic site amplification functions for Türkiye, with a particular emphasis on the Northwestern region. A thorough literature review indicated no prior studies have proposed such functions specifically for this area.

Northwestern Turkiye↗

USGS2022

Introduction to the special issue of the Consortium of Organizations for Strong Motion Observation Systems (COSMOS) international guidelines for applying noninvasive geophysical techniques to characterize seismic site conditions

Knowledge about local seismic site conditions provides critical information to account for site effects that are commonly observed in strong motion recordings. Certainly, other wave propagation effects can influence these observations, which are attributable to variations in material properties of the paths traveled by the waves, as well as the characteristics of the seismic source. However, local geologic conditions, particularly, when under shear-wave excitation, are known to have a strong influence on the behavior of ground shaking in the frequency range that is expected to directly affect the built environment. Thus, shear waves traveling in the shallow subsurface—defined here as tens to hundreds of meters beneath the ground surface—are the main foci for application and research in the earthquake engineering community.

Journal of Seismology↗

USGS2022

Flexible multimethod approach for seismic site characterization

We describe the flexible multimethod seismic site characterization technique for obtaining shear-wave velocity ( V S ) profiles and derivative information, such as the time-averaged V S of the upper 30 m ( V S30 ). Simply stated, the multimethod approach relies on the application of multiple independent noninvasive site characterization acquisition and analysis techniques utilized in a flexible field-based approach through a decision process based on primary factors such as the investigator’s available equipment, field logistics (e.g., available array deployment space, urban versus rural), geologic setting, and funding among other primary factors. In a multimethod approach, sites ideally should be characterized using both active and passive noninvasive (i.e., no drilling and only minimal disturbance to the ground surface) methods. Almost without exception, we recommend the use of at least one active-source technique for analyzing surface waves, which in the current state of practice would include one or more of the following: spectral analysis of surface waves (SASW; commonly Rayleigh waves) and multichannel analysis of surface waves (MASW; Rayleigh and/or Love waves). In addition, passive-source microtremor array methods (MAMs) using linear (one-dimensional) and two-dimensional arrays may be appropriate or even required for characterizing a given site. Similarly, the microtremor horizontal-to-vertical spectral ratio (mHVSR) method can be valuable for identifying shallow rock sites. Finally, P- and SH-wave seismic refraction methods warrant consideration, especially at rock and shallow-rock sites.

Journal of Seismology↗