USGS Science⌕ Search

SEARCH · USGS Science

Results for “Remote Sensing of Environment”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

1,659 records · Page 35Linked to original sources
USGS2018

Divisions of geologic time—Major chronostratigraphic and geochronologic units

Introduction Effective communication in the geosciences requires a consistent nomenclature for stratigraphic units and, especially, for divisions of geologic time. A geologic time scale is composed of standard stratigraphic divisions based on rock sequences and is calibrated in years. Geologists from the U.S. Geological Survey (USGS), State geological surveys, academia, and other organizations require a consistent time scale to be used in communicating ages of geo­logic units in the United States. Many international debates have occurred over names and boundaries of units, and various time scales have been used by the geoscience community. For consistent usage of time terms, the USGS Geologic Names Committee and the Association of American State Geologists devel­oped the Divisions of Geologic Time ; the 2018 update in this fact sheet contains the unit names and boundary age estimates ratified by the International Commission on Stratigraphy in 2018. Scientists may use other published time scales, provided that these are specified and referenced.

Fact Sheet↗
USGS2024

Lithium resource in the Smackover Formation brines of Southern Arkansas

Lithium-rich brine deposits occur throughout the United States, including in the Smackover Formation. The concentration of lithium in Smackover Formation brines was predicted across southern Arkansas by using a machine-learning model that incorporated lithium concentration data and geologic information. Between 5.1 and 19.0 million metric tons of lithium are calculated to be present in the brines of the Smackover Formation in southern Arkansas. The range in possible total lithium reflects the uncertainty in machine-learning predictions of lithium concentrations and the range of Smackover Formation porosity. This estimate quantifies the in-place lithium resource and does not consider the technological and economic feasibility of extracting the lithium from the brines.

Arkansas↗
USGS2025

The geology of Canadian potash: A critical mineral for feeding the world

Potash, potassium-bearing water-soluble salt, is the primary global economic source of potassium. Potash is recognized as a critical mineral in Canada as it is the largest source of potassium used in fertilizers. It is essential for global agricultural productivity and food security. Canada is the world’s largest potash exporter with vast deposits in the widely mined Prairie Evaporite of Saskatchewan, which formed in the epicontinental Elk Point Basin during the Middle Devonian. Potash is also found in the Windsor Group of Atlantic Canada where it formed in a series of tectonically active basins during the Mississippian that have undergone substantial post-depositional subsurface alteration and deformation. Potash deposits were mined in New Brunswick up until 2016. Both deposits are salt giants, recording times in the geologic record of extensive and long-lasting evaporite genesis under arid conditions in restricted seas. This paper reviews the geological and economic significance of Canadian potash, including (1) the genesis of each deposit, (2) diagenetic, erosional, and tectonic modification, and (3) exploration and mining in each basin. Underdeveloped regions, possible undiscovered resources, environmental considerations, and the importance of sustainable practices in light of climate change and socioeconomic risks are also addressed.

Facets↗
USGS1977

Summary of results from electromagnetic and galvanic soundings on Kilauea Iki lava lake, Hawaii

The purpose of this report is to summarize various electrical sounding studies made on the Kilauea Iki lava lake and to present some of the preliminary interpretations that resulted from the measurements. The following discussion is not intended as a complete interpretation, but is intended to summarize the major points made in an invited oral presentation at the American Geophysical Union fall meeting held in San Francisco, Calif. on December 6, 1976. This paper was part of a group of papers dealing with various geophysical studies recently made on the Kilauea Iki lava lake. A general plan map of Kilauea Iki lava lake is shown in figure 1. Electromagnetic (EM) loop-loop soundings, D.C. resistivity soundings, and VLF apparent resistivity measurements were made on the lave lake surface. All of these surveys were made to determine the geoelectric structure of the lava lake and to determine parameters of the molten basaltic lens that exist in the partially solidified lava lake.

Hawaii↗
USGS2024

Global variability of the composition and temperature at the 410-km discontinuity from receiver function analysis of dense arrays

Seismic boundaries caused by phase transitions between olivine polymorphs in Earth's mantle provide thermal and compositional markers that inform mantle dynamics. Seismic studies of the mantle transition zone often use either global averaging with sparse arrays or regional sampling from a single dense array. The intermediate approach of this study utilizes many densely spaced seismic arrays distributed around the globe. We systematically compute teleseismic P-to-S receiver functions for each seismic array and invert for the 1-D seismic velocity structure of the mantle transition zone beneath each array to facilitate a comparison between densely sampled regions. We stack 3,600 receiver functions on average at 67 arrays in total. The stack is used in a probabilistic inversion to estimate the mantle transition zone interface depths and velocities beneath each array. We focus on the 410-km discontinuity (410) because it is a prominent seismic interface that is clearly linked to a single mineral phase transition between olivine and wadsleyite. The depths and velocity contrasts of the 410 are mapped to temperatures and compositions using mineral physics constraints. The depth of the 410 ranges from ∼405–440 km, which is consistent with a ∼360 K temperature range in a dry mantle and a ∼260 K temperature range in a wet mantle (2 wt. % water). The Vs contrast across the 410 ranges from ∼2.5–8 %, which is consistent with ∼20–70 vol. % olivine composition in a dry mantle and ∼25–80 vol. % in a wet mantle. The bulk composition of the upper mantle near the 410-km discontinuity is typically considered to be well-mixed because there is no thermodynamic impediment to convection at the olivine to wadsleyite phase transition. However, the wide range of inferred olivine content from our study suggests that there are large lateral variations in the bulk composition of the upper mantle near the 410-km discontinuity.

Earth and Planetary Science Letters↗
USGS1998

Ground-water flow in the surficial aquifer system and potential movement of contaminants from selected waste-disposal sites at Cecil Field Naval Air Station, Jacksonville, Florida

As part of the Installation Restoration Program, Cecil Field Naval Air Station, Jacksonville, Florida, is considering remedialaction alternatives to control the possible movement of contaminants from sites that may discharge to the surface. This requires a quantifiable understanding of ground-water flow through the surficial aquifer system and how the system will respond to any future stresses. The geologic units of interest in the study area consist of sediments of Holocene to Miocene age that extend from land surface to the base of the Hawthorn Group. The hydrogeology within the study area was determined from gamma-ray and geologists' logs. Ground-water flow through the surficial aquifer system was simulated with a seven-layer, finite-difference model that extended vertically from the water table to the top of the Upper Floridan aquifer. Results from the calibrated model were based on a long-term recharge rate of 6 inches per year, which fell in the range of 4 to 10 inches per year, estimated using stream hydrograph separation methods. More than 80 percent of ground-water flow circulates within the surficial-sand aquifer, which indicates that most contaminant movement also can be expected to move through the surficial-sand aquifer alone. The surficial-sand aquifer is the uppermost unit of the surficial aquifer system. Particle-tracking results showed that the distances of most flow paths were 1,500 feet or less from a given site to its discharge point. For an assumed effective porosity of 20 percent, typical traveltimes are 40 years or less. At all of the sites investigated, particles released 10 feet below the water table had shorter traveltimes than those released 40 feet below the water table. Traveltimes from contaminated sites to their point of discharge ranged from 2 to 300 years. The contributing areas of the domestic supply wells are not very extensive. The shortest traveltimes for particles to reach the domestic supply wells from their respective contributing areas ranged from 70 to 200 years.

Florida↗
USGS2025

Favorability mapping for hydrothermal power resource assessments of the Great Basin, USA

The U.S. Geological Survey (USGS) is updating the 2008 assessment of conventional hydrothermal resources for the Great Basin in the western United States. As part of this work, the workflow for hydrothermal resource favorability maps is being modified to integrate modern data-driven machine learning (ML) methods. Improvements include: [1] using new and refined evidence layers (features); [2] using an order of magnitude more training sites (labeled examples); [3] utilizing simple but non-linear supervised ML algorithms; [4] representing positive training sites (wells with measured heat flow) with their ordinal value proportional to the magnitude of convective upflow (i.e., low, high, or very high convective signals instead of past strategies using positive-negative labels); [5] supplementing training sites with additional sites with low convective signals to represent diverse under-sampled areas where hydrothermal systems are unlikely to exist; [6] comparing with competing approaches; and [7] utilizing Monte Carlo cross-validation to estimate and evaluate prediction uncertainty. For the new favorability map, over half of the power-producing systems (i.e., 15 of 28) are predicted in the 99th percentile of most favorable locations (i.e., the highest 1 % of favorability, corresponding to 1 % of the map area), exceeding the performance of past models that have explicitly used power plants as training sites. Previous favorability maps predicted approximately half of the power-producing hydrothermal systems above the 80th percentile (i.e., 20 % of the map area). For the new favorability map, 93 % of power-producing systems (i.e., 26 of 28) are above the 80th percentile. The power-producing systems for which the new model does not perform well are either comparatively small, low-temperature systems or systems also not predicted well by prior modeling approaches, suggesting that these few systems are unusual when compared with most power-producing systems. Focusing research on these known, seemingly different systems may yield new insights and subsequent discovery of new prospects.

California, Idaho, Nevada, Oregon, Utah↗
USGS1988

Geology of an area near Brentwood, Williamson County, Tennessee

The lithology and geologic structure of an area near Brentwood, Williamson County, Tennessee, were studied to define the potential aquifers and confining units of the ground-water flow system. Four formations were identified. They are, in descending order, the Bigby-Cannon Limestone, the Hermitage Formation, the Carters Limestone, and the Lebanon Limestone. The Bigby-Cannon Limestone and the Carters Limestone are potential aquifers. The Hermitage Formation and the Lebanon Limestone are confining units. The Bigby-Cannon Limestone and the Hermitage Formation have been affected by recent erosion. Any variation of the Carters Limestone is controlled by pre-Carters erosion of the top of the Lebanon Limestone. The thickness of the Carters Limestone ranges from 65 to 79 feet. Structurally, the area reflects the regional northwest dip. A small scale anti-cline-syncline pair also is evident. This feature is not a result of erosion and also occurs in the T-3 bentonite bed in the Carters Limestone.

Tennessee↗
USGS2025

Bathymetric and acoustic-backscatter mapping of Lake Sammamish, Washington, during USGS field activity 2021-656-FA

In 2021, scientists from the U.S. Geological Survey (USGS) acquired bathymetric and acoustic-backscatter data within Lake Sammamish, Washington. Mapping was completed to find evidence of past earthquakes such as underwater landslides and is part of a larger USGS project to understand the overall geologic hazards history of the Cascadia Margin region. The survey was conducted using the USGS research vessel Parke Snavely outfitted with an interferometric sidescan-sonar system for swath mapping. Three estimates of bathymetric uncertainty were calculated from the post-processed bathymetric data. This report provides a summary of the mapping mission.

Washington↗
USGS2024

Chloride concentrations in groundwater from the western part of the Southern Hills regional aquifer system, Louisiana, 2021–22

Groundwater is heavily used for public supply and industrial uses in the Baton Rouge, Louisiana, area. Lowered water levels resulting from groundwater withdrawals have induced the movement of saltwater towards wells in East Baton Rouge and West Baton Rouge Parishes. Saltwater intrusion has the potential to affect water supply infrastructure, reduce water availability for some uses, and increase treatment costs. To document current conditions, samples were collected from 161 wells screened in 10 aquifers of the Southern Hills regional aquifer system during November 2021 through February 2022. The results were compared with historical data to identify where chloride concentrations are increasing, which could indicate that saltwater intrusion is occurring. Saltwater intrusion, to varying degrees and areal extents, was observed in most of the 10 aquifers. The limited availability of monitoring wells near or within some of the known saltwater plume areas restricts tracking of the movement or delineation of the plumes’ current extents.

Louisiana↗
USGS2026

Non-destructive sampling of larval amphibians shows tail tissues reflect whole-body methylmercury concentrations and trophic-related differences in bioaccumulation

Mercury (Hg), and specifically methylmercury (MeHg), is a contaminant of global concern to humans and wildlife, but there is still limited understanding of its effects on many taxa. Amphibians are closely associated with water, where Hg is converted to MeHg, and high concentrations of MeHg can reduce survival of amphibians in the wild. However, limited non-lethal proxies exist for estimating MeHg bioaccumulation in amphibian larvae, which could be used to reduce destructive sampling and allow sampling of imperiled species. We evaluated whether tail clips were indicative of whole-body MeHg concentrations of larval amphibians, whether dragonflies were an effective bioindicator of Hg concentrations of larval amphibians, and compared MeHg bioaccumulation in predatory caudate (salamanders, newts) and non-predatory anuran (frogs, toads) larvae. Tail-clip and whole-body MeHg concentrations were strongly correlated, especially for caudates. There was high variability among sites and species, but caudates had higher MeHg than anurans, and MeHg concentrations of caudates and anurans were strongly correlated. Dragonflies were a weak indicator of MeHg for anurans but strong indicators for larval caudates, likely because caudates and dragonflies are carnivorous and occupy similar trophic positions. Our study revealed that sampling tails can be an effective non-destructive index of whole-body MeHg for larval amphibians and demonstrates differences in MeHg bioaccumulation related to trophic position in larval amphibians and dragonflies. All post-embryo life stages for a broad suite of amphibian species can now be sampled non-lethally for MeHg, allowing for a broader examination of population-level effects and focus on imperiled species that cannot be sampled destructively.

conterminous United States↗
USGS2024

Vulnerability assessment of groundwater influenced ecosystems in the Northeastern United States

Groundwater-influenced ecosystems (GIEs) are increasingly vulnerable due to groundwater extraction, land-use practices, and climate change. These ecosystems receive groundwater inflow as a portion of their baseflow or water budget, which can maintain water levels, water temperature, and chemistry necessary to sustain the biodiversity that they support. In some systems (e.g., springs, seeps, fens), this connection with groundwater is central to the system’s integrity and persistence. Groundwater management decisions for human use often do not consider the ecological effects of those actions on GIEs. This disparity can be attributed, in part, to a lack of information regarding the physical relationships these systems have with the surrounding landscape and climate, which may influence the environmental conditions and associated biodiversity. We estimate the vulnerability of areas predicted to be highly suitable for the presence of GIEs based on watershed (U.S. Geological Survey Hydrologic Unit Code 12 watersheds: 24–100 km 2 ) and pixel (30 m × 30 m pixels) resolution in the Atlantic Highlands and Mixed Wood Plains EPA Level II Ecoregions in the northeastern United States. We represent vulnerability with variables describing adaptive capacity (topographic wetness index, hydric soil, physiographic diversity), exposure (climatic niche), and sensitivity (aquatic barriers, proportion urbanized or agriculture). Vulnerability scores indicate that ~26% of GIEs were within 30 m of areas with moderate vulnerability. Within these GIEs, climate exposure is an important contributor to vulnerability of 40% of the areas, followed by land use (19%, agriculture or urbanized). There are few areas predicted to be suitable for GIEs that are also predicted to be highly vulnerable, and of those, climate exposure is the most important contributor to their vulnerability. Persistence of GIEs in the northeastern United States may be challenged as changes in the amount and timing of precipitation and increasing air temperatures attributed to climate change affect the groundwater that sustains these systems.

Connecticut, Delaware, District of Columbia, Maine↗
USGS2025

Formation of the Mount Weld rare earth element deposit, Western Australia: A carbonatite-derived laterite

Carbonatite-hosted rare earth element (REE) deposits are the primary source of the world’s light REEs. The Mount Weld REE deposit in Western Australia is hosted in a lateritic sequence that reflects supergene enrichment of the underlying carbonatite. Water-rock interaction is a key to the formation of this world-class deposit. REE enrichment in the laterite is controlled by the breakdown of primary minerals, the release and transport of REEs, and the formation of secondary minerals. Secondary REE-bearing phosphate minerals are the primary REE-host phases in the laterite ore with monazite as the dominant phase; other REE-bearing phases include rhabdophane, cerianite, churchite, florencite, and crandallite subgroup minerals. Profiles through the laterite show that in the REE-rich zone, apatite and primary calcite and dolomite have broken down such that the loss of Ca and Mg, as well as Si and K, leads to a relative increase in the REEs. Sequestering of REEs in secondary mineral phases formed by groundwater further enhances the REE concentration.

Mount Weld Mine↗
USGS2025

The 3D Elevation Program—Supporting the economy of Massachusetts

Introduction Massachusetts extends from the mountains of the Appalachian system in the west of the State to the sandy beaches and rocky shorelines of the Atlantic coast in the east. Inland topographic data support a wide range of important activities, including geologic mapping, transportation planning, forest and wildlife management, quantifying ecological services, water supply protection, commonwealth-wide infrastructure planning, local site planning, and flood-plain management. Nearshore bathymetry can be used to support coastal portions of the Commonwealth by addressing the combined threats of ocean warming, strong storm surge, and rising sea levels. The maintenance and (or) expansion of Massachusetts ports (for instance, Boston, New Bedford) and Cape Cod sediment management depends upon the accurate mapping of bathymetry and the frequent influx of sediment and redeposition. Critical applications that address the broad range of requirements depend on light detection and ranging (lidar) data that provide a highly detailed three-dimensional (3D) model of the Earth’s surface and aboveground features. The 3D Elevation Program (3DEP) is managed by the U.S. Geological Survey (USGS) in partnership with Federal, State, Tribal, U.S. territorial, and local agencies to acquire consistent lidar coverage at quality level 2 or better to meet the many needs of the Nation and Massachusetts. The status of available and in-progress 3DEP baseline lidar data in Massachusetts is shown in figure 1. 3DEP baseline lidar data include quality level 2 or better, 1-meter or better digital elevation models, and lidar point clouds, and must meet the Lidar Base Specification version 1.2 ( https://www.usgs.gov/3dep/lidarspec ) or newer requirements. The National Enhanced Elevation Assessment identified user requirements and conservatively estimated that availability of lidar data would result in at least $1.23 million in new benefits annually to Massachusetts. The top 10 Massachusetts business uses for 3D elevation data, which are based on the estimated annual conservative benefits of 3DEP, are shown in table 2.

Massachusetts↗
USGS2025

A newly identified creeping strand of the Concord fault, San Francisco Bay Area

The Concord fault constitutes a major branch of the Pacific–North America transform plate boundary in Northern California, bridging the strike‐slip Bartlett Springs ‐ Green Valley Fault system to the north with the Greenville and Calaveras Faults to the south. Like many faults in the San Francisco Bay Area its long‐term slip is partially accommodated by aseismic slip (creep). Although creep has been recognized and monitored on the northern half of the fault for decades, the precise location of the southern half of the fault and its slip rate—whether accommodated seismically or aseismically—has remained enigmatic. How slip transfers between the Concord and Greenville or Calaveras faults to the south remains an outstanding question. New field observations presented here indicate that the active trace of the fault south of downtown Concord is not where previously interpreted and is indeed actively creeping. We report observations of shallow creep continuing >7 km farther south along the Concord fault than previously reported, along a fault strand not previously recognized for most of its length. This is evident as right‐laterally deflected concrete curbs and sidewalk slabs on both sides of every street that crosses the fault at a high angle in southeast Concord and northeast Walnut Creek. We document the magnitude and location of these deflections to estimate accumulated right‐lateral aseismic slip expressed in engineered structures. Offsets of these piercing lines range from 8 to 18 cm, over widths varying from narrow breaks along centimeter‐scale concrete joints to 10‐m‐wide zones of deflection. Significantly, this active trace is ∼400 m west of where the Quaternary active trace has previously been inferred, placing it within—rather than bounding—the built area of suburban Concord. Slip along the fault has already caused infrastructure damage. These results revise our understanding of the southern Concord fault and help constrain its seismic potential.

California↗
USGS2025

Earthquake stress drop, source spectra from laboratory experiments, and the apparent unsteadiness of frictional slip

Over a range of co-seismic total energy release, high sample rate slip, stress, and slip velocity measurements were made during frictional failure to determine seismic source properties. The near-field measurements were used to estimate stress drops using spectral approaches that are analogous to the standard seismological moment-corner determined Δσ and acceleration amplitude Δσ arms stress drops. Rapid frictional sliding produces slip velocity amplitude spectra that vary with frequency -1 so long as the energy dissipated by friction approaches the total energy release. Under these conditions Δσ and Δσ arms are similar in size. Since these are nearly direct measurements of fault slip velocity and because they produce flat acceleration spectra between the corner and an apparent fmax, friction in these experiments seems to produce dynamic acceleration and deceleration at all resolved frequencies. The physical origin of this unsteady motion is not known exactly but likely reflects rapid dynamic variations in fault strength or applied stress. On the other hand, when the total energy stored prior to failure is artificially made somewhat larger relative to that which can be dissipated by friction the velocity spectra vary with frequency -2 immediately below the corner. At these conditions Δσ and Δσ arms diverge. The excess stored energy is preferentially partitioned into radiated energy upon failure. Collectively the experiments imply that to produce unsteady, white noise accelerations that are observed for natural earthquakes, requires that at least 95% of the energy released does not escape the source region to be radiated to the far-field.

Bulletin of the Seismological Society of America↗