USGS Science⌕ Search

SEARCH · USGS Science

Results for “Project Completion Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 613 records · Page 34Linked to original sources
USGS2002

Cyclic injection, storage, and withdrawal of heated water in a sandstone aquifer at St. Paul, Minnesota--Analysis of thermal data and nonisothermal modeling of short-term test cycles

In May 1980, the University of Minnesota began a project to evaluate the feasibility of storing heated water (150 degrees Celsius) in the Franconia-Ironton Galesville aquifer (183 to 245 meters below land surface) and later recovering it for space heating. The University's steam-generation facilities supplied high-temperature water for injection. The Aquifer Thermal-Energy Storage system is a doublet-well design in which the injection-withdrawal wells are spaced approximately 250 meters apart. Water was pumped from one of the wells through a heat exchanger, where heat was added or removed. This water was then injected back into the aquifer through the other well. Four short-term test cycles were completed. Each cycle consisted of approximately equal durations of injection and withdrawal ranging from 5.25 to 8.01 days. Equal rates of injection and withdrawal, ranging from 17.4 to 18.6 liters per second, were maintained for each short-term test cycle. Average injection temperatures ranged from 88.5 to 117.9 degrees Celsius. Temperature graphs for selected depths at individual observation wells indicate that the Ironton and Galesville Sandstones received and stored more thermal energy than the upper part of the Franconia Formation. Clogging of the Ironton Sandstone was possibly due to precipitation of calcium carbonate or movement of fine-grain material or both. Vertical-profile plots indicate that the effects of buoyancy flow were small within the aquifer. A three-dimensional, anisotropic, nonisothermal, ground-water-flow, and thermal-energy-transport model was constructed to simulate the four short-term test cycles. The model was used to simulate the entire short-term testing period of approximately 400 days. The only model properties varied during model calibration were longitudinal and transverse thermal dispersivities, which, for final calibration, were simulated as 3.3 and 0.33 meters, respectively. The model was calibrated by comparing model-computed results to (1) measured temperatures at selected altitudes in four observation wells, (2) measured temperatures at the production well, and (3) calculated thermal efficiencies of the aquifer. Model-computed withdrawal-water temperatures were within an average of about 3 percent of measured values and model-computed aquifer-thermal efficiencies were within an average of about 5 percent of calculated values for the short-term test cycles. These data indicate that the model accurately simulated thermal-energy storage within the Franconia-Ironton-Galesville aquifer.

Professional Paper↗
USGS2016

Archive of bathymetry and backscatter data collected in 2014 nearshore Breton and Gosier Islands, Breton National Wildlife Refuge, Louisiana

As part of the Barrier Island Monitoring Project, scientists from the U.S. Geological Survey (USGS) St. Petersburg Coastal and Marine Science Center conducted nearshore geophysical surveys off Breton and Gosier Islands, Louisiana, in July and August of 2014. To assist the United States Fish and Wildlife Service (USFWS) with restoration planning efforts, the USGS was tasked with answering fundamental questions about the physical environment of the southern Chandeleur Islands, including the geology, morphology, and oceanography. Baseline data needed to answer these questions were either insufficient or missing. The USGS conducted a comprehensive geologic investigation in the summer of 2014, collecting geophysical and sedimentological data. Breton Island, located at the southern end of the Chandeleur Island chain in southeastern Louisiana, was recognized as a natural, globally significant nesting sanctuary for several bird species and was established as the Breton National Wildlife Refuge (NWR) in 1904. The areal extent of Breton Island has diminished 90 percent since 1920. Land loss is attributed to ongoing relative sea-level rise, diminished sediment supply, and storm impacts. The bird population on Breton Island has also declined over the years, most notably after Hurricane George in 1998 and after Hurricane Katrina in 2015; the latter completely submerged the island. Despite decreasing habitable acreage, migratory seabirds continue to return and nest on Breton Island. To prevent the island from being submerged in the future, and to protect, stabilize, and provide more nesting and foraging areas for the bird population, the USFWS proposed a restoration effort to rebuild Breton Island to its pre-Katrina footprint. This data series serves as an archive of processed interferometric swath and single-beam bathymetry data, and side-scan sonar data, collected in the nearshore of Breton and Gosier Islands, NWR, Louisiana. The data were collected during two USGS cruises (USGS Field Activity Numbers 2014-314-FA and 2014-317-FA) in July and August 2014. Geographic information system data products include a 100-meter-cell-size interpolated bathymetry grid, trackline maps, and point data files. Additional files include error analysis maps, Field Activity Collection System logs, and formal Federal Geographic Data Committee metadata. NOTE: These data are scientific in nature and are not to be used for navigation. Any use of trade names is for descriptive purposes only and does not imply endorsement by the U.S. Government.

Louisiana↗
USGS2010

Effects of building a sand barrier berm to mitigate the effects of the Deepwater Horizon oil spill on Louisiana marshes

The State of Louisiana requested emergency authorization on May 11, 2010, to perform spill mitigation work on the Chandeleur Islands and on all the barrier islands from Grand Terre Island eastward to Sandy Point to enhance the capability of the islands to reduce the movement of oil from the Deepwater Horizon oil spill to the marshes. The proposed action-building a barrier berm (essentially an artificial island fronting the existing barriers and inlets) seaward of the existing barrier islands and inlets-'restores' the protective function of the islands but does not alter the islands themselves. Building a barrier berm to protect the mainland wetlands from oil is a new strategy and depends on the timeliness of construction to be successful. Prioritizing areas to be bermed, focusing on those areas that are most vulnerable and where construction can be completed most rapidly, may increase chances for success. For example, it may be easier and more efficient to berm the narrow inlets of the coastal section to the west of the Mississippi River Delta rather than the large expanses of open water to the east of the delta in the southern parts of the Breton National Wildlife Refuge (NWR). This document provides information about the potential available sand resources and effects of berm construction on the existing barrier islands. The proposed project originally involved removing sediment from a linear source approximately 1 mile (1.6 km) gulfward of the barrier islands and placing it just seaward of the islands in shallow water (~2-m depth where possible) to form a continuous berm rising approximately 6 feet (~2 m) above sea level (North American Vertical Datum of 1988–NAVD88) with an ~110-yd (~100-m) width at water level and a slope of 25:1 to the seafloor. Discussions within the U.S. Geological Survey (USGS) and with others led to the determination that point-source locations, such as Hewes Point, the St. Bernard Shoals, and Ship Shoal, were more suitable "borrow" locations because sand content is insufficient along a linear track offshore from most of Louisiana's barrier islands. Further, mining sediment near the toe of the barrier island platform or edge of actively eroding barrier islands could create pits in the seafloor that will capture nearshore sand, thereby enhancing island erosion, and focus incoming waves (for example, through refraction processes) that could yield hotspots of erosion. In the Breton NWR, the proposed berm would be continuous from just south of Hewes Point to Breton Island for approximately 100 km with the exception of several passages for vessel access. Proposed volume estimates by sources outside of the USGS suggest that the structure in the Breton NWR would contain approximately 56 million cubic yards (42.8 m 3 ) of sandy material. In the west, the berm would require approximately 36 million cubic yards (27.5 m 3 ) of sandy material because this area has less open water than the area to the east of the delta. The planned berm is intended to protect the islands and inland areas from oil and would be sacrificial; that is, it will rapidly erode through natural processes. It is not part of the coastal restoration plan long discussed in Louisiana to rebuild barrier islands for hurricane protection of mainland infrastructure and habitat.

Louisiana↗
USGS2022

Water quality of sand and gravel aquifers in McHenry County, Illinois, 2020 and comparisons to conditions in 2010

McHenry County, Illinois, obtains most of its drinking water from shallow sand and gravel aquifers (groundwater). To evaluate this groundwater resource, the U.S. Geological Survey, in cooperation with McHenry County, Illinois, collected water-quality samples from 41 of 42 monitoring wells in the McHenry County Groundwater Monitoring Network and 4 monitoring wells from the U.S. Geological Survey National Water-Quality Assessment Project. Additionally, a subset of 12 monitoring wells was sampled and analyzed for pharmaceuticals and wastewater indicator compounds (WICs), collectively referred to as “contaminants of emerging concern” (CECs). Results from this 2020 study were compared to the 2010 results to assess changes in groundwater quality. Statistical analyses and chloride-bromide ratio analyses also were completed to assess changes in water quality. Health-based benchmarks were exceeded for arsenic (about 24 percent; 11 of 45 monitoring wells), sodium (40 percent, 18 of 45), and manganese (about 2 percent, 1 of 45). Aesthetically based benchmarks were exceeded for dissolved solids (about 29 percent, 13 of 45), chloride (about 4 percent, 2 of 45), iron (about 87 percent, 39 of 45), and manganese (about 29 percent, 13 of 45). CECs were detected at low or estimated concentrations in 8 of the 12 (about 67 percent) monitoring wells analyzed. In addition to sampling the groundwater monitoring wells, three surface-water-quality monitoring sites also were sampled and analyzed for pharmaceuticals and WICs to provide a preliminary assessment of the presence of CECs in the surface waters. CECs were detected in all three of the surface-water-quality monitoring samples collected, and WICs were more prevalent and more frequently detected than pharmaceutical compounds. These results provided a cursory understanding of the presence of CECs in surface waters and do not constitute a robust analysis of sources, seasonality, range of concentrations, persistence, or effects. The 2020 groundwater-quality results had measurements of field properties, and concentrations of major ions, trace metals, and nutrients that were consistent with 2010 results with statistically significant increases for calcium, magnesium, and silica, and decreases for aluminum, ammonia, arsenic, barium, bromide, calcium, molybdenum, phosphate, specific conductance, sulfate, and dissolved solids. Increases generally were detected in the intermediate and deep parts of the sand and gravel aquifer, and decreases were detected in the shallow parts of the sand and gravel aquifer. The mixed distribution of increases and decreases among the various constituents and aquifer-depth groups could be reflecting dissolution and mobility of some of the redox sensitive constituents and dilution of some constituents in the shallow aquifer depths. These changes may be attributed to a combination of stable population of the past decade (2010–20), land-use management practices, and the recent wet years of 2017 through 2019 causing a dilution of the major ions in the shallow parts of the aquifer.

Illinois↗
USGS1980

Data-base system for northern Midwest regional aquifer-system analysis

The U.S. Geological Survey is conducting a study of the Cambrian and Ordovician aquifer system of the northern Midwest as part of a national series of Regional Aquifer-Systems Analysis (RASA). An integral part of this study will be a simulation of the ground-water flow regime using the Geological Survey's three-dimensional finite-difference model. The first step in the modeling effort is the design and development of a systematic set of processes to facilitate the collection, evaluation, manipulation, and use of large quantities of information. A computerized data-base system to accomplish these goals has been completed for the northern Midwest RASA. The input to the data-base system consists of either point values or contour maps of the hydrogeologic data required by the model. Digital samples of contoured surfaces are obtained by machine digitization. Uniformly spaced model-node values are then computed from the discrete data by two-dimensional interpolation. The interpolator uses the regional (long wavelength) characteristics of the data to compute a surface with minimum total curvature. Local (short wavelength) data are merged with the regional surface to produce the model-node values at the desired spacing. Nonuniformly spaced nodal values may be obtained by fitting two-dimensional polynomials (bicubic splines) to surfaces formed by uniformly spaced points and solving for the surface values at the node locations. The uniformly or nonuniformly spaced node values constitute the output of the data-base system and in turn are the input arrays of data values for the ground-water flow model. Management of the data base is facilitated by forming a data file for each model input parameter and for other hydrogeologic data used in the study. The data files are subdivided into elements consisting of individual model-layer arrays. In this form the data base can be readily accessed and edited. In addition to the interpolation programs, software components of the system include programs: (1) to transform geographic coordinates on a Lambert conformal conic projection to cartesian coordinates and vice versa, (2) to machine contour gridded data, (3) to expedite manipulation and editing of data, and (4) to perform various interarray computations. The data-base system has the following attributes: (1) manual handling of data is minimized and machine handling of data is maximized, (2) given unequally spaced point data over the extent of a study area, model input arrays for any reasonable uniform node spacing can be rapidly computed, (3) accuracy of computed node values are generally compatible with accuracy and spatial distribution of point data, (4) a relatively large class of nonuniformly spaced node configurations can be computed, (5) data within data-base files can be easily accessed and readily edited, and (6) the occurrence of data processing errors at various stages of data-base generation is monitored by machine contouring the computed grids. Functioning of the data-base system is illustrated by the sequence of steps required to produce a model-input array of transmissivity, given raw geologic and hydraulic conductivity data.

Water-Resources Investigations Report↗
USGS2005

Evaluating water management strategies with the Systems Impact Assessment Model: SIAM version 4

Water from many of California's coastal rivers has been used for a wide variety of development ventures, including major agricultural diversions, hydropower generation, and contaminant assimilation from industry, agriculture and logging. Anthropogenic impacts often degrade water quality and decrease the quantity and quality of aquatic habitat. Reallocating streamflow away from uses that degrade water quality to uses that foster higher water quality is a critical step in restoring riverine habitat and the anadromous fish that rely on that habitat for a portion of their life cycle. Reallocation always brings with it the need to examine the economic efficiency of the proposed changes. If the dollar benefits of improving water quality are greater than the costs, the criterion of improving economic efficiency is satisfied, a fact that can be highly persuasive to decision makers contemplating reallocation. Previous related studies have examined nonmarket benefits of the Trinity River in northern California (Douglas and Taylor, 1998; Douglas and Taylor, 1999abc) but nothing of this kind had been done on the Klamath River, another system with numerous uses for and competition over water in times of drought. An economic survey is nearing completion for the mid- to lower Klamath River, including the Scott, Shasta, and Salmon Rivers, but excluding the Trinity River. This survey provides valuable insights about the magnitude of the benefits and nature of the costs of reallocating water from market uses to instream flows that improve water quality and assist in the recovery of Klamath River fish stocks. Preliminary survey results (Douglas and Johnson, 2002; Douglas and Sleeper, In Prep.) indicate that about 234,000 California, Oregon, and Nevada households made recreation trips to the Klamath River Basin 1997-1998 and that these users spent about $372 million on trip related expenditures. Clearly the prosperity of the region is closely linked to the demand for mid- and lower Klamath River Basin recreation trips. Further, respondents indicated that they would make roughly 36% more recreational trips per annum to the Klamath if the water quality and the fishery were restored to an unspoiled condition. Using two distinct types of survey data, these additional trips would yield benefits with a present value of approximately $9.6 billion (at a discount rate of 7.5%). Calculating costs to restore the fishery and raise water quality involved five major hypothetical restoration activities: (1) purchasing Klamath project farmland and environmentally sensitive forest lands, (2) allocating more water down the Trinity River to enhance the quantity and quality of Klamath flows below the confluence, (3) removing four mainstem dams along the Klamath River and losing their associated hydropower production, (4) eliminating all harvest of Klamath-Trinity fish stocks for a 12-year period including the acquisition of fishing rights from both tribal and commercial marine fishermen, and (5) operating all Klamath-Trinity fish hatcheries to restore self-reproducing stocks. In total, restoration costs were estimated to be about $1.7 to $2.3 billion. If the assumptions used in this study are valid, it is clear that the benefits ($9.6B) outweigh the costs of restoring water quality and the fishery. The apparent disparity between restoration benefits and costs for the Klamath River may suggest to some that water resources on the Klamath be reallocated to environmentally friendly nonmarket uses. The economic analysis rests in part on the information made available to the survey designers by the biological, hydrologic, and water quality data incorporated in The System Impact Assessment Model (SIAM). It is our hope that SIAM can be used to improve the river's water quality and fishery, and strengthen the important regional economy.

Open-File Report↗
USGS2021

Sediment concentrations and loads upstream from and through John Redmond Reservoir, east-central Kansas, 2010–19

Streambank erosion and reservoir sedimentation are primary concerns of resource managers in Kansas and throughout many regions of the United States and negatively affect flood control, water supply, and recreation. The Cottonwood and upper Neosho Rivers drain into John Redmond Reservoir, and since reservoir completion in 1964, there has been substantial conservation-pool sedimentation and storage loss in John Redmond Reservoir, causing storage capacity losses more rapidly than most other Federal reservoirs in Kansas. The U.S. Geological Survey (USGS), in cooperation with the Kansas Water Office, has monitored water quality (temperature, specific conductance, and turbidity) on the Cottonwood River (upstream from the reservoir) and Neosho River (upstream and downstream from the reservoir) since 2007 with additional sites added in 2009. The purpose of this report is to quantify suspended-sediment concentrations, loads, and yields entering and exiting John Redmond Reservoir during January 1, 2010, through December 31, 2019. Three water-quality monitoring sites were upstream from the reservoir (Cottonwood River near Plymouth, Kansas [USGS site 07182250; hereinafter referred to as “Cottonwood”]; Neosho River at Burlingame Road near Emporia, Kans. [USGS site 07179750; hereinafter referred to as “Burlingame”]; and Neosho River at Neosho Rapids, Kans. [USGS site 07182390; hereinafter referred to as “Neosho Rapids”]), and one water-quality monitoring site was downstream from the reservoir (Neosho River at Burlington, Kans. [USGS site 07182510; hereinafter referred to as “Burlington”]). The Neosho Rapids streamgage is downstream from the confluence of the Cottonwood and upper Neosho Rivers and has a contributing drainage area accounting for 91 percent of the total contributing drainage area to John Redmond Reservoir. Continuously measured streamflow, water quality, and discrete water-quality data were used to develop updated regression models to compute suspended-sediment concentrations, loads, and yields upstream and downstream from John Redmond Reservoir in east-central Kansas. Several turbidity sensors were deployed during the analysis period, and there are no established relations between the sensors; therefore, individual models for each sensor were developed. Model statistics for the turbidity and suspended-sediment concentration linear regression models were better (based on the coefficient of determination, root mean square error, and model standard percentage error) than the streamflow and suspended-sediment concentration linear regression models, indicating better model performance. Computed concentrations, loads, and yields do not account for the ungaged 9 percent of the drainage basin downstream from the Neosho Rapids streamgage. Mean daily suspended-sediment loads upstream from the reservoir were largest at Neosho Rapids (2,250 tons), second largest at Cottonwood (2,180 tons), and smallest at Burlingame (624 tons). Streamflow at Burlington was predominately regulated by reservoir releases, and mean daily suspended-sediment loads were smaller (286 tons) than at upstream sites. Among the upstream sites, Cottonwood had the largest mean daily suspended-sediment concentration (179 milligrams per liter [mg/L]), followed by Neosho Rapids (162 mg/L), and Burlingame (108 mg/L). Burlington had the smallest mean daily suspended-sediment concentration of all sites (46 mg/L). Annual reservoir trapping efficiency ranged from 82 to 94 percent, and the largest sediment mass trapped was during 2019 (2,230,000 tons). Reservoir storage decreased an estimated 7,750 acre-feet during 2010 and 2014–19. Using the mean trapping efficiency to estimate suspended-sediment loads during years with missing data (2011–13), the total estimated reservoir storage lost to sedimentation for the analysis period (2010–19) was 8,690 acre-feet, about 17 percent of the remaining storage space reported in 2007. The mean annual sedimentation rate during the analysis period (747 acre-feet per year) was about 85 percent larger than the design sedimentation rate (404 acre-feet per year) originally projected during construction. Different reservoir outflow management strategies, including operating near normal capacity as opposed to higher flood pool levels, could reduce the total reservoir storage lost by 3 percent (about 261 acre-feet), which is equal to 14 percent of the total sediment removed during the dredging operation in 2016. During the study period, about 56 percent of the total suspended-sediment load was transported during streamflows greater than the National Weather Service flood action stage at the upstream sites (0.1–5 percent of the record; Cottonwood mean: 48 percent; Burlingame mean: 40 percent; Neosho Rapids mean: 78 percent). Disproportionately large sediment loads were delivered during short periods of time, and localized efforts of stream erosion protection (streambank stabilization, riparian buffers) were likely to be overwhelmed. Precipitation frequency and intensity are projected to continue to increase in this region; therefore, future sediment reduction strategies that account for extreme episodic events may be beneficial. Changes to reservoir outflow management could also minimize sediment accumulation while still preserving flood control. Continued investigation of sediment reduction measures is necessary for future mitigation with the understanding that sedimentation rate is largely driven by high flows. Results from this study can be used to calibrate sediment models, explore sediment reduction strategies, highlight the importance of continued water-quality monitoring to determine effectiveness and changes in sediment transport, and assess the ability of John Redmond Reservoir to support designated uses into the future.

Kansas↗
USGS2011

Sedimentation and occurrence and trends of selected nutrients, other chemical constituents, and cyanobacteria in bottom sediment, Clinton Lake, northeast Kansas, 1977-2009

A combination of available bathymetric-survey information and bottom-sediment coring was used to investigate sedimentation and the occurrence of selected nutrients (total nitrogen and total phosphorus), organic and total carbon, 25 trace elements, cyanobacterial akinetes, and the radionuclide cesium-137 in the bottom sediment of Clinton Lake, northeast Kansas. The total estimated volume and mass of bottom sediment deposited from 1977 through 2009 in the conservation (multi-purpose) pool of the reservoir was 438 million cubic feet and 18 billion pounds, respectively. The estimated sediment volume occupied about 8 percent of the conservation-pool, water-storage capacity of the reservoir. Sedimentation in the conservation pool has occurred about 70 percent faster than originally projected at the time the reservoir was completed. Water-storage capacity in the conservation pool has been lost to sedimentation at a rate of about 0.25 percent annually. Mean annual net sediment deposition since 1977 in the conservation pool of the reservoir was estimated to be 563 million pounds per year. Mean annual net sediment yield from the Clinton Lake Basin was estimated to be 1.5 million pounds per square mile per year. Typically, the bottom sediment sampled in Clinton Lake was at least 99 percent silt and clay. The mean annual net loads of total nitrogen and total phosphorus deposited in the bottom sediment of Clinton Lake were estimated to be 1.29 million pounds per year and 556,000 pounds per year, respectively. The estimated mean annual net yields of total nitrogen and total phosphorus from the Clinton Lake Basin were 3,510 pounds per square mile per year and 1,510 pounds per square mile per year, respectively. Throughout the history of Clinton Lake, total nitrogen concentrations in the deposited sediment generally were uniform and indicated consistent inputs to the reservoir over time. Likewise, total phosphorus concentrations in the deposited sediment generally were uniform. Although, for two of three coring sites, a possible positive trend in phosphorus deposition was indicated. The Wakarusa River possibly was a larger contributor of nitrogen and phosphorus to Clinton Lake than was Rock Creek. As a principal limiting factor for primary production in most freshwater environments, phosphorus is of particular importance because increased inputs can contribute to accelerated reservoir eutrophication and the production of algal toxins and taste-and-odor compounds. Trace-element concentrations in the bottom sediment of Clinton Lake generally were uniform over time. As is typical for eastern Kansas reservoirs, arsenic, chromium, and nickel concentrations typically exceeded the threshold-effects guidelines, which represent the concentrations above which toxic biological effects occasionally occur. Zinc concentrations frequently exceeded the threshold-effects guideline. Trace-element concentrations did not exceed the probable-effects guidelines (available for eight trace elements), which represent the concentrations above which toxic biological effects usually or frequently occur. Cyanobacterial akinetes (cyanobacteria resting stage) in the bottom sediment of Clinton Lake, combined with historical water-quality data on chlorophyll-a and total phosphorus concentrations, indicated that the reservoir likely has been eutrophic throughout most of its history. A statistically significant increase in cyanobacterial akinetes in the bottom sediment indicated that Clinton Lake may have become more eutrophic over the life of the reservoir. The increase in cyanobacterial akinetes may, in part, be related to a possible increase in total phosphorus concentrations.

Scientific Investigations Report↗
USGS2011

Project Planning for Cougar Dam during 2010

Cougar Dam is a 158 m-tall, rock fill dam located about 63 km east of Springfield, Oregon. Completed in 1963, the dam is owned and operated by the U.S. Army Corps of Engineers (USACE). It impounds Cougar Reservoir, which is 9.7 km long, has a surface area of 518 ha, and is predominately used for flood control. The pool elevation typically ranges from a maximum conservation pool of 515 m (1,690 ft) National Geodetic Vertical Datum (NGVD) in summer to a minimum flood control elevation of 467 m (1,532 ft NGVD) in winter. The reservoir thermally stratifies in the summer, has an average depth of 37 m, and holds 153,500 acre-feet when full. Cougar Dam is located on the South Fork of the McKenzie River 7 km upstream from the mainstem McKenzie River, a tributary of the Willamette River. The McKenzie River Basin basin supports the largest remaining population of wild spawning spring Chinook salmon in the Willamette River Basin (National Oceanic and Atmospheric Administration; NOAA, 2008). Cougar Dam and others were collectively deemed to cause jeopardy to the sustainability of anadromous fish stocks in the Willamette River Basin (NOAA, 2008). Prior to dam construction, as many as 805 redds were observed in the South Fork of the McKenzie River (Willis and others, 1960) and it is estimated that 40 km of spawning habitat were lost when access was blocked after dam construction. The 2008 Willamette Biological Opinion (BIOP) requires improvements to operations and structures to reduce impacts on Upper Willamette River (UWR) Chinook salmon (Oncorhynchus tshawytscha) and UWR steelhead (O. mykiss; NOAA, 2008). In 2010, an adult fish collection facility was completed below Cougar Dam to collect returning adult salmon for transport to spawning habitats above the dam. Before that time, returning adult spring Chinook salmon were transported to upstream spawning areas as part of a trap-and-haul program with adults passed ranging annually from 0 to 1,038 (Taylor, 2000). The progeny of adult fish that are allowed to spawn above Cougar Dam move downstream into Cougar Reservoir in the spring. Under the BIOP, the USACE is required to provide downstream fish passage or operational alternatives at Cougar Dam by 2014. Currently, there is little information about the seasonal timing of reservoir entry of juvenile Chinook salmon and what habitats they and other fishes use in the reservoir. However, rotary screw traps placed in the outlet channel below the dam indicate peak juvenile passage coinciding with seasonally low pool elevation in mid December and late January. It is unknown whether juveniles upstream of Cougar Dam can be captured in large enough numbers for tagging and subsequent survival studies to proceed. These studies are needed to examine the feasibility of installing downstream fish passage structures at Cougar Dam to meet BIOP requirements. Therefore, the USACE contracted with the U.S. Geological Survey (USGS) to test the efficacy of using a mid-water trawl and lampara seine to capture fish in Cougar Reservoir on three consecutive days in the fall of 2010. These collection methods could potentially provide fish for feasibility and subsequent survival studies and as verification of fish targets in future active hydroacoustic surveys.

Oregon↗
USGS2017

Fena Valley Reservoir watershed and water-balance model updates and expansion of watershed modeling to southern Guam

In 2014, the U.S. Geological Survey, in cooperation with the U.S. Department of Defense’s Strategic Environmental Research and Development Program, initiated a project to evaluate the potential impacts of projected climate-change on Department of Defense installations that rely on Guam’s water resources. A major task of that project was to develop a watershed model of southern Guam and a water-balance model for the Fena Valley Reservoir. The southern Guam watershed model provides a physically based tool to estimate surface-water availability in southern Guam. The U.S. Geological Survey’s Precipitation Runoff Modeling System, PRMS-IV, was used to construct the watershed model. The PRMS-IV code simulates different parts of the hydrologic cycle based on a set of user-defined modules. The southern Guam watershed model was constructed by updating a watershed model for the Fena Valley watersheds, and expanding the modeled area to include all of southern Guam. The Fena Valley watershed model was combined with a previously developed, but recently updated and recalibrated Fena Valley Reservoir water-balance model. Two important surface-water resources for the U.S. Navy and the citizens of Guam were modeled in this study; the extended model now includes the Ugum River watershed and improves upon the previous model of the Fena Valley watersheds. Surface water from the Ugum River watershed is diverted and treated for drinking water, and the Fena Valley watersheds feed the largest surface-water reservoir on Guam. The southern Guam watershed model performed “very good,” according to the criteria of Moriasi and others (2007), in the Ugum River watershed above Talofofo Falls with monthly Nash-Sutcliffe efficiency statistic values of 0.97 for the calibration period and 0.93 for the verification period (a value of 1.0 represents perfect model fit). In the Fena Valley watershed, monthly simulated streamflow volumes from the watershed model compared reasonably well with the measured values for the gaging stations on the Almagosa, Maulap, and Imong Rivers—tributaries to the Fena Valley Reservoir—with Nash-Sutcliffe efficiency values of 0.87 or higher. The southern Guam watershed model simulated the total volume of the critical dry season (January to May) streamflow for the entire simulation period within –0.54 percent at the Almagosa River, within 6.39 percent at the Maulap River, and within 6.06 percent at the Imong River. The recalibrated water-balance model of the Fena Valley Reservoir generally simulated monthly reservoir storage volume with reasonable accuracy. For the calibration and verification periods, errors in end-of-month reservoir-storage volume ranged from 6.04 percent (284.6 acre-feet or 92.7 million gallons) to –5.70 percent (–240.8 acre-feet or –78.5 million gallons). Monthly simulation bias ranged from –0.48 percent for the calibration period to 0.87 percent for the verification period; relative error ranged from –0.60 to 0.88 percent for the calibration and verification periods, respectively. The small bias indicated that the model did not consistently overestimate or underestimate reservoir storage volume. In the entirety of southern Guam, the watershed model has a “satisfactory” to “very good” rating when simulating monthly mean streamflow for all but one of the gaged watersheds during the verification period. The southern Guam watershed model uses a more sophisticated climate-distribution scheme than the older model to make use of the sparse climate data, as well as includes updated land-cover parameters and the capability to simulate closed depression areas. The new Fena Valley Reservoir water-balance model is useful as an updated tool to forecast short-term changes in the surface-water resources of Guam. Furthermore, the now spatially complete southern Guam watershed model can be used to evaluate changes in streamflow and recharge owing to climate or land-cover changes. These are substantial improvements to the previous models of the Fena Valley watershed and Reservoir. Datasets associated with this report are available as a U.S. Geological Survey data release (Rosa and Hay, 2017; DOI:10.5066/F7HH6HV4).

Scientific Investigations Report↗
USGS2002

Geologic map of the Frisco quadrangle, Summit County, Colorado

New 1:24,000-scale geologic mapping along the Interstate-70 urban corridor in western Colorado, in support of the USGS Central Region State/USGS Cooperative Geologic Mapping Project, is contributing to a more complete understanding of the stratigraphy, structure, tectonic evolution, and hazard potential of this rapidly developing region. The 1:24,000-scale Frisco quadrangle is near the headwaters of the Blue River and straddles features of the Blue River graben (Kellogg, K.S., 1999, Neogene basins of the northern Rio Grande rift?partitioning and asymmetry inherited from Laramide and older uplifts: Tectonophysics, v. 305, p. 141-152.), part of the northernmost reaches of the Rio Grande rift, a major late Oligocene to recent zone of extension that extends from Colorado to Mexico. The Williams Range thrust fault, the western structural margin of the Colorado Front Range, cuts the northeastern corner of the quadrangle. The oldest rocks in the quadrangle underlie the Tenmile Range and include biotite-sillimanite schist and gneiss, amphibolite, and migmatite that are intruded by granite inferred to be part of the 1,667-1,750 Ma Routt Plutonic Suite (Tweto, Ogden, 1987, Rock units of the Precambrian- basement in Colorado: U.S. Geological Survey Professional Paper 1321-A, 54 p.). The oldest sedimentary unit is the Pennsylvanian Maroon Formation, a sequence of red sandstone, conglomerate, and interbedded shale. The thickest sequence of sedimentary rocks is Cretaceous in age and includes at least 500 m of the Upper Cretaceous Pierre Shale. The sedimentary rocks are intruded by sills and dikes of dacite porphyry sills of Swan Mountain, dated at 44 Ma (Marvin, R.F., Mehnert, H.H., Naeser, C.W., and Zartman, R.E., 1989, U.S. Geological Survey radiometric ages, compilation ?C??Part five?Colorado, Montana, Utah, and Wyoming: Isochron/West, no. 53, p. 14-19. Simmons, E.C., and Hedge, C.E., 1978, Minor-element and Sr-isotope geochemistry of Tertiary stocks, Colorado mineral belt: Contributions to Mineralogy and Petrology, v. 67, p. 379-396.). Surficial deposits include (1) an old, deeply dissected landslide deposit, possibly as old as Tertiary, on the south flank of Tenderfoot Mountain, (2) deeply weathered, very coarse gravel deposits, mostly along Gold Run and underlying Mesa Cortina; the gravels are gold bearing and were mined by hydraulic methods in the 1800's, (3) glacial deposits of both Bull Lake (middle Pleistocene) and Pinedale (late Pleistocene) that were derived from large valley glaciers that flowed down Tenmile and North Tenmile Creeks; the town of Frisco is underlain mostly by Pinedale-age glacial outwash, (4) recent landslide deposits, including one large (about 1 square kilometer) area just downslope from Lilly Pad Lake, west of I-70, and (5)extensive colluvial and alluvial deposits. The latest seismic events appear to be middle Pliestocene in age and are associated with small scarps that cut Bull Lake till but do not cut Pinedale till.

Miscellaneous Field Studies Map↗
USGS2011

Hydrogeology, chemical characteristics, and water sources and pathways in the zone of contribution of a public-supply well in San Antonio, Texas

In 2001, the National Water-Quality Assessment (NAWQA) Program of the U.S. Geological Survey initiated a series of studies on the transport of anthropogenic and natural contaminants (TANC) to public-supply wells (PSWs). The main goal of the TANC project was to better understand the source, transport, and receptor factors that control contaminant movement to PSWs in representative aquifers of the United States. Regional- and local-scale study areas were selected from within existing NAWQA study units, including the south-central Texas Edwards aquifer. The local-scale TANC study area, nested within the regional-scale NAWQA study area, is representative of the regional Edwards aquifer. The PSW selected for study is within a well field of six production wells. Although a single PSW was initially selected, because of constraints of well-field operation, samples were collected from different wells within the well field for different components of the study. Data collected from all of the well-field wells were considered comparable because of similar well construction, hydrogeology, and geochemistry. An additional 38 PSWs (mostly completed in the confined part of the aquifer) were sampled throughout the regional aquifer to characterize water quality. Two monitoring well clusters, with wells completed at different depths, were installed to the east and west of the well field (the Zarzamora and Timberhill monitoring well clusters, respectively). One of the monitoring wells was completed in the overburden to evaluate potential hydrologic connectivity with the Edwards aquifer. Geophysical and flowmeter logs were collected from one of the well-field PSWs to determine zones of contribution to the wellbore. These contributing zones, associated with different hydrogeologic units, were used to select monitoring well completion depths and groundwater sample collection depths for depth-dependent sampling. Depth-dependent samples were collected from the PSW from three different depths and under three different pumping conditions. Additionally, selected monitoring wells and one of the well-field PSWs were sampled several times in response to a rainfall and recharge event to assess short-term (event-scale) temporal variations in water quality. For comparison purposes, groundwater samples were categorized as being from regional aquifer PSWs, from the well field (wellhead samples), from the monitoring wells (excluding the overburden well), from the overburden well, from the PSW depth-dependent sampling, and from temporal sampling. Groundwater samples were analyzed for inorganic, organic, isotopic, and age-dating tracers to characterize geochemical conditions in the aquifer and provide understanding of the mechanisms of mobilization and movement of selected constituents from source areas to a PSW. Sources, tracers, and conditions used to assess water quality and processes affecting the PSW and the aquifer system included (1) carbonate host rock composition; (2) physicochemical constituents; (3) major and trace element concentrations; (4) saturation indices with respect to minerals in aquifer rocks; (5) elemental ratios, such as magnesium to calcium ratios, that are indicative of water-rock interaction processes; (6) oxidation-reduction conditions; (7) nutrient concentrations, in particular nitrate concentrations; (8) the isotopic composition of nitrate, which can point to specific nitrate sources; (9) strontium isotopes; (10) stable isotopes of hydrogen and oxygen; (11) organic contaminant concentrations, including pesticides and volatile organic compounds; (12) age tracers, apparent-age distribution, and dissolved gas data used in age interpretations; (13) depth-dependent water chemistry collected from the PSW under different pumping conditions to assess zones of contribution; and (14) temporal variability in groundwater composition from the PSW and selected monitoring wells in response to an aquifer recharge event. Geochemical results indicate that the well-field and monitoring well samples were largely representative of groundwater in the regional confined aquifer. Constituents of concern in the Edwards aquifer for the long-term sustainability of the groundwater resource include the nutrient nitrate and anthropogenic organic contaminants. Nitrate concentrations (as nitrogen) for regional aquifer PSWs had a median value of 1.9 milligrams per liter, which is similar to previously reported values for the regional aquifer. Nitrate-isotope compositions for groundwater samples collected from the well-field PSWs and monitoring wells had a narrow range, with values indicative of natural soil organic values. A comparison with historical nitrate-isotope values, however, suggests that a component of nitrate in groundwater from biogenic sources might have increased over the last 30 years. Several organic contaminants (the pesticide atrazine, its degradate deethylatrazine, trichloromethane (chloroform; a drinking-water disinfection byproduct), and the solvent tetrachloroethene (PCE)) were widely distributed throughout the regional aquifer and in the local-scale TANC study area at low concentrations (less than 1 microgram per liter). Higher concentrations of PCE were detected in samples from the well-field PSWs and Zarzamora monitoring wells relative to the regional aquifer PSWs. The urban environment is a likely source of contaminants to the aquifer, and these results indicate that one or more local urban sources might be supplying PCE to the Zarzamora monitoring wells and the well-field wells. Samples from the well field also had high concentrations of chloroform relative to the monitoring wells and regional aquifer PSWs. For samples from the regional aquifer PSWs, the most frequently detected organic contaminants generally decreased in concentration with increasing well depth. Deeper wells might intercept longer regional flow paths with higher fractions of older water or water recharged in rural recharge areas in the western part of the aquifer that have been less affected by anthropogenic contaminants. A scenario of hypothetical contaminant loading was evaluated by using results from groundwater-flow-model particle tracking to assess the response of the aquifer to potential contamination. Results indicate that the aquifer responds quickly (less than 1 year to several years) to contaminant loading; however, it takes a relatively long time (decades) for concentrations to reach peak values. The aquifer also responds quickly (less than 1 year to several years) to the removal of contaminant loading; however, it also takes a relatively long time (decades) to reach near background concentrations. Interpretation of geochemical age tracers in this well-mixed karst system was complicated by contamination of a majority of measured tracers and complexities of extensive mixing. Age-tracer results generally indicated that groundwater samples were composed of young, recently recharged water with piston-flow model ages ranging from less than 1 to 41 years, with a median of 17 years. Although a piston-flow model is typically not valid for karst aquifers, the model ages provide a basis for comparing relative ages of different samples and a reference point for more complex hydrogeologic models for apparent-age interpretations. Young groundwater ages are consistent with particle-tracking results from hydrogeologic modeling for the local-scale TANC study area. Age-tracer results compared poorly with other geochemical indicators of groundwater residence time and anthropogenic effects on water quality, indicating that hydrogeologic conceptual models used in groundwater age interpretations might not adequately account for mixing in this karst system. Groundwater samples collected from the well field under a variety of pumping conditions were relatively homogeneous and well mixed for numerous geochemical constituents (with the notable exception of age tracers). Groundwater contributions to the PSW were dominated by well-mixed, relatively homogeneous groundwater, typical of the regional confined aquifer. Zones of preferential flow were determined for the PSW, but groundwater samples from different stratigraphic units were not geochemically distinct. Variations in chemical constituents in response to a rainfall and aquifer recharge event occurred but were relatively minor in the PSW and monitoring wells. This observation is consistent with the hypothesis that the response to individual recharge events in the confined aquifer, unless intersecting conduit flow paths, might be attenuated by mixing processes along regional flow paths. Results of this study are consistent with the existing conceptual understanding of aquifer processes in this karst system and are useful for water-resource development and management practices.

Texas↗
USGS2009

Cone penetration test and soil boring at the Bayside Groundwater Project Site in San Lorenzo, Alameda County, California

Aquifer-system deformation associated with ground-water-level changes is being investigated cooperatively by the U.S. Geological Survey (USGS) and the East Bay Municipal Utility District (EBMUD) at the Bayside Groundwater Project (BGP) near the modern San Francisco Bay shore in San Lorenzo, California. As a part of this project, EBMUD has proposed an aquifer storage and recovery (ASR) program to store and recover as much as 3.78x104 m3/d of water. Water will be stored in a 30-m sequence of coarse-grained sediment (the 'Deep Aquifer') underlying the east bay alluvium and the adjacent ground-water basin. Storing and recovering water could cause subsidence and uplift at the ASR site and adjacent areas because the land surface will deform as aquifers and confining units elastically expand and contract with ASR cycles. The Deep Aquifer is overlain by more than 150 m of clayey fine-grained sediments and underlain by comparable units. These sediments are similar to the clayey sediments found in the nearby Santa Clara Valley, where inelastic compaction resulted in about 4.3 m of subsidence near San Jose from 1910 to 1995 due to overdraft of the aquifer. The Deep Aquifer is an important regional resource, and EBMUD is required to demonstrate that ASR activities will not affect nearby ground-water management, salinity levels, or cause permanent land subsidence. Subsidence in the east bay area could induce coastal flooding and create difficulty conveying winter storm runoff from urbanized areas. The objective of the cooperative investigation is to monitor and analyze aquifer-system compaction and expansion, as well as consequent land subsidence and uplift resulting from natural causes and any anthropogenic causes related to ground-water development and ASR activities at the BGP. Therefore, soil properties related to compressibility (and the potential for deformation associated with ground-water-level changes) are of the most concern. To achieve this objective, 3 boreholes were drilled at the BGP for the purpose of monitoring pore-fluid pressure changes and aquifer-system deformation. One 308-m deep borehole contains six piezometers, the other two boreholes are 182 and 299 m deep and contain a dual-stage extensometer. To investigate the physical properties of the sediments, two phases of subsurface exploration were conducted. In the first phase, a USGS drilling crew obtained numerous core samples, 5.8 cm in diameter by 1.5 m long. The samples were extracted between July 28, 2006, and August 5, 2006; nine samples were tested for this study at the USGS soils laboratory in Menlo Park, California. Phase two began on June 22, 2006, when a seismic cone penetration test (SCPT) sounding was made to a depth of 32.3 m. Additional field work was completed May 8, 2007, with a hollow-stem auger boring that took continuous 9.8-cm-diameter samples from the depth interval of 6.1 to 10.7 m to supplement poor recovery from the first phase of sampling. These samples were also tested in the soils laboratory at the USGS.

California↗
USGS2016

Estimating black bear density in New Mexico using noninvasive genetic sampling coupled with spatially explicit capture-recapture methods

During the 2004–2005 to 2015–2016 hunting seasons, the New Mexico Department of Game and Fish (NMDGF) estimated black bear abundance (Ursus americanus) across the state by coupling density estimates with the distribution of primary habitat generated by Costello et al. (2001). These estimates have been used to set harvest limits. For example, a density of 17 bears/100 km2 for the Sangre de Cristo and Sacramento Mountains and 13.2 bears/100 km2 for the Sandia Mountains were used to set harvest levels. The advancement and widespread acceptance of non-invasive sampling and mark-recapture methods, prompted the NMDGF to collaborate with the New Mexico Cooperative Fish and Wildlife Research Unit and New Mexico State University to update their density estimates for black bear populations in select mountain ranges across the state. We established 5 study areas in 3 mountain ranges: the northern (NSC; sampled in 2012) and southern Sangre de Cristo Mountains (SSC; sampled in 2013), the Sandia Mountains (Sandias; sampled in 2014), and the northern (NSacs) and southern Sacramento Mountains (SSacs; both sampled in 2014). We collected hair samples from black bears using two concurrent non-invasive sampling methods, hair traps and bear rubs. We used a gender marker and a suite of microsatellite loci to determine the individual identification of hair samples that were suitable for genetic analysis. We used these data to generate mark-recapture encounter histories for each bear and estimated density in a spatially explicit capture-recapture framework (SECR). We constructed a suite of SECR candidate models using sex, elevation, land cover type, and time to model heterogeneity in detection probability and the spatial scale over which detection probability declines. We used Akaike’s Information Criterion corrected for small sample size (AICc) to rank and select the most supported model from which we estimated density. We set 554 hair traps, 117 bear rubs and collected 4,083 hair samples. We identified 725 (367 M, 358 F) individuals; the sex ratio for each study area was approximately equal. Our density estimates varied within and among mountain ranges with an estimated density of 21.86 bears/100 km2 (95% CI: 17.83 – 26.80) for the NSC, 19.74 bears/100 km2 (95% CI: 13.77 – 28.30) in the SSC, 25.75 bears/100 km2 (95% CI: 13.22 – 50.14) in the Sandias, 21.86 bears/100 km2 (95% CI: 17.83 – 26.80) in the NSacs, and 16.55 bears/100 km2 (95% CI: 11.64 – 23.53) in the SSacs. Overall detection probability for hair traps and bear rubs, combined, was low across all study areas and ranged from 0.00001 to 0.02. We speculate that detection probabilities were affected by failure of some hair samples to produce a complete genotype due to UV degradation of DNA, and our inability to set and check some sampling devices due to wildfires in the SSC. Ultraviolet radiation levels are particularly high in New Mexico compared to other states where NGS methods have been used because New Mexico receives substantial amounts of sunshine, is relatively high in elevation (1,200 m – 4,000 m), and is at a lower latitude. Despite these sampling difficulties, we were able to produce density estimates for New Mexico black bear populations with levels of precision comparable to estimated black bear densities made elsewhere in the U.S. Our ability to generate reliable black bear density estimates for 3 New Mexico mountain ranges is attributable to our use of a statistically robust study design and analytical method. There are multiple factors that need to be considered when developing future SECR-based density estimation projects. First, the spatial extent of the population of interest and the smallest average home range size must be determined; these will dictate size of the trapping array and spacing necessary between hair traps. The number of technicians needed and access to the study areas will also influence configuration of the trapping array. We believe shorter sampling occasions could be implemented to reduce degradation of DNA due to UV radiation; this might help increase amplification rates and thereby increase both the number of unique individuals identified and the number of recaptures, improving the precision of the density estimates. A pilot study may be useful to determine the length of time hair samples can remain in the field prior to collection. In addition, researchers may consider setting hair traps and bear rubs in more shaded areas (e.g., north facing slopes) to help reduce exposure to UV radiation. To reduce the sampling interval it will be necessary to either hire more field personnel or decrease the number of hair traps per sampling session. Both of these will enhance detection of long-range movement events by individual bears, increase initial capture and recapture rates, and improve precision of the parameter estimates. We recognize that all studies are constrained by limited resources, however, increasing field personnel would also allow a larger study area to be sampled or enable higher trap density. In conclusion, we estimated the density of black bears in 5 study areas within 3 mountains ranges of New Mexico. Our estimates will aid the NMDGF in setting sustainable harvest limits. Along with estimates of density, information on additional demographic rates (e.g., survival rates and reproduction) and the potential effects that climate change and future land use may have on the demography of black bears may also help inform management of black bears in New Mexico, and may be considered as future areas for research.

New Mexico↗
USGS1981

Assessment of impacts of proposed coal-resource and related economic development on water resources, Yampa River basin, Colorado and Wyoming: A summary

Expanded mining and use of coal resources in the Rocky Mountain region of the western United States will have substantial impacts on water resources, environmental amenities, and social and economic conditions. The U.S. Geological Survey has completed a 3-year assessment of the Yampa River basin, Colorado and Wyoming, where increased coal-resource development has begun to affect the environment and quality of life. Economic projections of the overall effects of coal-resource development were used to estimate water use and the types and amounts of waste residuals that need to be assimilated into the environment. Based in part upon these projections, several physical-based models and other semiquantitative assessment methods were used to determine possible effects upon the basin's water resources. Depending on the magnitude of mining and use of coal resources in the basin, an estimated 0.7 to 2.7 million tons (0.6 to 2.4 million metric tons) of waste residuals may be discharged annually into the environment by coal-resource development and associated economic activities. If the assumed development of coal resources in the basin occurs, annual consumptive use of water, which was approximately 142,000 acre-feet (175 million cubic meters) during 1975, may almost double by 1990. In a related analysis of alternative cooling systems for coal-conversion facilities, four to five times as much water may be used consumptively in a wet-tower, cooling-pond recycling system as in once-through cooling. An equivalent amount of coal transported by slurry pipeline would require about one-third the water used consumptively by once-through cooling for in-basin conversion. Current conditions and a variety of possible changes in the water resources of the basin resulting from coal-resource development were assessed. Basin population may increase by as much as threefold between 1975 and 1990. Volumes of wastes requiring treatment will increase accordingly. Potential problems associated with ammonia-nitrogen concentrations in the Yampa River downstream from Steamboat Springs were evaluated using a waste-load assimilative-capacity model. Changes in sediment loads carried by streams due to increased coal mining and construction of roads and buildings may be apparent only locally; projected increases in sediment loads relative to historic loads from the basin are estimated to be 2 to 7 percent. Solid-waste residuals generated by coal-conversion processes and disposed of into old mine pits may cause widely dispersed ground-water contamination, based on simulation-modeling results. Projected increases in year-round water use will probably result in the construction of several proposed reservoirs. Current seasonal patterns of streamflow and of dissolvedsolids concentrations in streamflow will be altered appreciably by these reservoirs. Decreases in time-weighted mean-annual dissolved-solids concentrations of as much as 34 percent are anticipated, based upon model simulations of several configurations of proposed reservoirs. Detailed statistical analyses of water-quality conditions in the Yampa River basin were made. Regionalized maximum waterquality concentrations were estimated for possible comparison with future conditions. Using Landsat imagery and aerial photographs, potential remote-sensing applications were evaluated to monitor land-use changes and to assess both snow cover and turbidity levels in streams. The technical information provided by the several studies of the Yampa River basin assessment should be useful to regional planners and resource managers in evaluating the possible impacts of development on the basin's water resources.

Colorado, Wyoming↗
USGS2020

Geochemical assessment of groundwater in the Big Chino subbasin, Arizona, 2011–18

A geochemical characterization of groundwater in the Big Chino subbasin of Arizona was conducted by the U.S. Geological Survey, in cooperation with the City of Prescott, the Town of Prescott Valley, and the Salt River Project, to understand groundwater evolution through the study area and the source of water to springs along the gaining reach of the Verde River just downstream from its confluence with Granite Creek. Samples were collected between 2011 and 2018 in groundwater wells completed in basin-fill and carbonate aquifers and at selected springs, including two discrete springs discharging along the aforementioned stretch of the Verde River. Five newly installed monitoring wells completed in the carbonate aquifer were sampled in 2018. Water-quality results obtained from these samples include the first known geochemical data for carbonate groundwater beneath the basin-fill in the Big Chino subbasin downgradient from Walnut Creek near Paulden, Arizona, as well as other parts of the study area without previous data. Groundwater samples were collected and analyzed for major ions, arsenic, nutrients, stable isotopes of oxygen and hydrogen (δ 18 O and δ 2 H), strontium isotopes ( 87 Sr/ 86 Sr), carbon-14, isotopes of carbon (δ 13 C), and noble gases. Significant differences in groundwater geochemistry between the basin-fill and carbonate aquifers were driven primarily by higher pH, tritium, and δ 18 O and δ 2 H in the basin-fill aquifer samples and higher specific conductance and higher concentrations of calcium, sodium, bicarbonate, fluoride, and arsenic in the carbonate aquifer samples. All but one sample from the carbonate aquifer and two samples from the basin-fill aquifer exceeded the U.S. Environmental Protection Agency (EPA) drinking water standard for arsenic of 10 micrograms per liter. One basin-fill aquifer sample exceeded the EPA drinking water standard for fluoride of 4 milligrams per liter, and one carbonate aquifer sample exceeded the EPA secondary drinking water standard for fluoride of 2 milligrams per liter. A component of modern groundwater recharged following aboveground nuclear testing beginning in the mid-1950s is present in some basin-fill and spring groundwater from this study. Groundwater that can be dated using radiocarbon decay is also present in the study area, with four groundwater samples indicating possible recharge during the Pleistocene with groundwater ages ranging from approximately 34,600 to 13,300 years before present. Other groundwater sampled during this study that can dated using radiocarbon decay ranged in age from about 7,500 to 1,100 years before present, indicating possible recharge during the Holocene. The gaining reach of the Verde River downstream from the confluence with Granite Creek shows areal changes in temperature, pH, and specific conductance, indicating multiple zones of groundwater input. Surface-water samples for analyses of δ 18 O and δ 2 H have been collected at the Verde River near Paulden, Ariz. streamgage (09503700) during discharge measurements since 2009, and a trend analysis of the δ 18 O and δ 2 H data indicated no significant trend exists for the 10-year period of record. Additional groundwater samples from the carbonate aquifer beneath the basin-fill upgradient and downgradient from Walnut Creek would provide valuable information to understand groundwater evolution along the Big Chino subbasin.

Arizona↗
USGS2011

Using observed postconstruction peak discharges to evaluate a hydrologic and hydraulic design model, Boneyard Creek, Champaign and Urbana, Illinois

Boneyard Creek—which drains an urbanized watershed in the cities of Champaign and Urbana, Illinois, including part of the University of Illinois at Urbana-Champaign (UIUC) campus—has historically been prone to flooding. Using the Stormwater Management Model (SWMM), a hydrologic and hydraulic model of Boneyard Creek was developed for the design of the projects making up the first phase of a long-term plan for flood control on Boneyard Creek, and the construction of the projects was completed in May 2003. The U.S. Geological Survey, in cooperation with the Cities of Champaign and Urbana and UIUC, installed and operated stream and rain gages in order to obtain data for evaluation of the design-model simulations. In this study, design-model simulations were evaluated by using observed postconstruction precipitation and peak-discharge data. Between May 2003 and September 2008, five high-flow events on Boneyard Creek satisfied the study criterion. The five events were simulated with the design model by using observed precipitation. The simulations were run with two different values of the parameter controlling the soil moisture at the beginning of the storms and two different ways of spatially distributing the precipitation, making a total of four simulation scenarios. The simulated and observed peak discharges and stages were compared at gaged locations along the Creek. The discharge at one of these locations was deemed to be critical for evaluating the design model. The uncertainty of the measured peak discharge was also estimated at the critical location with a method based on linear regression of the stage and discharge relation, an estimate of the uncertainty of the acoustic Doppler velocity meter measurements, and the uncertainty of the stage measurements. For four of the five events, the simulated peak discharges lie within the 95-percent confidence interval of the observed peak discharges at the critical location; the fifth was just outside the upper end of this interval. For two of the four simulation scenarios, the simulation results for one event at the critical location were numerically unstable in the vicinity of the discharge peak. For the remaining scenarios, the simulated peak discharges over the five events at the critical location differ from the observed peak discharges (simulated minus observed) by an average of 7.7 and -1.5 percent, respectively. The simulated peak discharges over the four events for which all scenarios have numerically stable results at the critical location differs from the observed peak discharges (simulated minus observed) by an average of -6.8, 4.0, -5.4, and 1.5 percent, for the four scenarios, respectively. Overall, the discharge peaks simulated for this study at the critical location are approximately balanced between overprediction and underprediction and do not indicate significant model bias or inaccuracy. Additional comparisons were made by using peak stages at the critical location and two additional sites and using peak discharges at one additional site. These comparisons showed the same pattern of differences between observed and simulated values across events but varying biases depending on streamgage and measurement type (discharge or stage). Altogether, the results from this study show no clear evidence that the design model is significantly inaccurate or biased and, therefore, no clear evidence that the modeled flood-control projects in Champaign and on the University of Illinois campus have increased flood stages or discharges downstream in Urbana.

Illinois↗
USGS2015

Feasibility and potential effects of the proposed Amargosa Creek Recharge Project, Palmdale, California

Historically, the city of Palmdale and vicinity have relied on groundwater as the primary source of water, owing, in large part, to the scarcity of surface water in the region. Despite recent importing of surface water, groundwater withdrawal for municipal, industrial, and agricultural use has resulted in groundwater-level declines near the city of Palmdale in excess of 200 feet since the early 1900s. To meet the growing water demand in the area, the city of Palmdale has proposed the Amargosa Creek Recharge Project (ACRP), which has a footprint of about 150 acres along the Amargosa Creek 2 miles west of Palmdale, California. The objective of this study was to evaluate the long-term feasibility of recharging the Antelope Valley aquifer system by using infiltration of imported surface water from the California State Water Project in percolation basins at the ACRP. Three monitoring sites were constructed, and geophysical surveys (gravity, seismic, and resistivity) were completed to define the thickness of valley-fill deposits, depth to water, and location of faults that could influence groundwater flow. Data collected at the monitoring sites, and results from the geophysical surveys, were used to identify three northwest-southeast trending faults in the vicinity of the proposed recharge facility; these faults are probably related to the nearby San Andreas fault zone. Water levels collected from wells at the monitoring sites showed water-level altitude differences as much as 230 feet between the upgradient and downgradient sides of the faults, indicating that these faults are barriers to groundwater flow. Lithologic and geophysical logs indicated the presence of a coarse gravel and sand unit extending from land surface to about 150 feet below land surface that did not appear to be disrupted by faulting. Water samples collected from the monitoring wells were analyzed for major ions, nutrients, trace elements, dissolved organic carbon, volatile organic compounds, stable isotopes of oxygen (oxygen-18) and hydrogen (hydrogen-2, or deuterium), and the radioactive isotopes of hydrogen (hydrogen-3, or tritium) and carbon (carbon-14, or 14 C) to determine the water quality of the aquifer system and to help determine the source and age of the groundwater. Results of the water-quality analysis indicated that the source of natural recharge is Amargosa Creek near the ACRP, but that the creek does not provide modern-day recharge downstream of the ACRP. Potential effects of artificial recharge at the ACRP were evaluated by using a local-scale model of groundwater flow. On the basis of geologic samples collected during drilling, the hydraulic conductivity of the sand and gravel unit in the upper 150 feet was assumed to range from 10 to 100 feet per day. To address the goal of minimizing the potential for liquefaction during an earthquake from water-table rise associated with groundwater recharge at the ACRP, simulated water levels were constrained to remain at least 50 feet below land surface, except beneath the proposed artificial-recharge facility. The hydraulic conductivities of faults were estimated on the basis of water-level data and an estimate of natural recharge along Amargosa Creek. With assumed horizontal hydraulic conductivities of 10 and 100 feet per day in the upper 150 feet, the simulated maximum artificial recharge rates to the regional flow system at the ACRP were 3,400 and 9,400 acre-feet per year, respectively. These maximum recharge rates were limited primarily by the horizontal hydraulic conductivity in the upper 150 feet and by the liquefaction constraint. Future monitoring of water-level and soil-water content changes during the proposed project would allow improved estimation of aquifer hydraulic properties, the effect of the faults on groundwater movement, and the overall recharge capacity of the ACRP.

California↗