USGS Science⌕ Search

SEARCH · USGS Science

Results for “Geophysics”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 559 records · Page 31Linked to original sources
USGS2012

The ICDP Snake River Geothermal Drilling Project: preliminary overview of borehole geophysics

Hotspot: The Snake River Geothermal Drilling Project was undertaken to better understand the geothermal systems in three locations across the Snake River Plain with varying geological and hydrological structure. An extensive series of standard and specialized geophysical logs were obtained in each of the wells. Hydrogen-index neutron and γ-γ density logs employing active sources were deployed through the drill string, and although not fully calibrated for such a situation do provide semi-quantitative information related to the ‘stratigraphy’ of the basalt flows and on the existence of alteration minerals. Electrical resistivity logs highlight the existence of some fracture and mineralized zones. Magnetic susceptibility together with the vector magnetic field measurements display substantial variations that, in combination with laboratory measurements, may provide a tool for tracking magnetic field reversals along the borehole. Full waveform sonic logs highlight the variations in compressional and shear velocity along the borehole. These, together with the high resolution borehole seismic measurements display changes with depth that are not yet understood. The borehole seismic measurements indicate that seismic arrivals are obtained at depth in the formations and that strong seismic reflections are produced at lithological contacts seen in the corresponding core logging. Finally, oriented ultrasonic borehole televiewer images were obtained over most of the wells and these correlate well with the nearly 6 km of core obtained. This good image log to core correlations, particularly with regards to drilling induced breakouts and tensile borehole and core fractures will allow for confident estimates of stress directions and or placing constraints on stress magnitudes. Such correlations will be used to orient in core orientation giving information useful in hydrological assessments, paleomagnetic dating, and structural volcanology.

Snake River↗
USGS1980

Integration of geological, geochemical, and geophysical spatial data of the Cement oil field, Oklahoma, test site

Measurement pertaining to geology, geochemistry, and geophysics of the Cement oil field, Oklahoma, test site were collected employing both airborne sensors and ground-based data collection. The measurements include: (1) airborne gamma-ray spectrometry (supplying bismuth 214, thalium 208, and potassium 40 gamma-ray intensities); (2) aeromagnetic survey data; (3) multi-frequency airborne resistivity survey data (supplying apparent electrical resistivity of near surface materials); (4) gravity data; (5) geological and topographic maps; and (6) image data from Landsat MSS and U-2 photography.

Oklahoma↗
USGS1990

Recent geophysical and geological research in Antarctica related to the assessment of petroleum resources and potential environmental hazards to their development

During the 6-year negotiation of and adoption of the Convention on the Regulation of Antarctic Mineral Resources Activities on June 2, 1988, various countries have increased their attention to the possibility of exploitation of Antarctica's petroleum resources, which are covered by this treaty. However, there are no known petroleum resources in Antarctica, and scientific information is lacking to adequately assess any undiscovered resources or the possible environmental hazards to their development. Scientific research carried out in Antarctica since the International Geophysical Year (1957-1958) has provided a great deal of information on the geological framework of this ice-covered continent and its margin and has found general indications of the types of hazards that must be considered. Antarctica covers a vast area, and likely supergiant oil fields of the type to be exploited would be tiny (e.g., a few tens of kilometers across) in comparison. Any petroleum resources located in Antarctica will be found by applying the knowledge, techniques, and experience gained developing oil fields in other parts of the world and would, therefore, be other examples of general cases; in contrast, the Antarctic environment and its associated hazards must be considered unique.

Book chapter↗
USGS2011

An open-water electrical geophysical tool for mapping sub-seafloor heavy placer minerals in 3D and migrating hydrocarbon plumes in 4D

A towed-streamer technology has been developed for mapping placer heavy minerals and dispersed hydrocarbon plumes in the open ocean. The approach uses induced polarization (IP), an electrical measurement that encompasses several different surface-reactive capacitive and electrochemical phenomena, and thus is ideally suited for mapping dispersed or disseminated targets. The application is operated at sea by towing active electrical geophysical streamers behind a ship; a wide area can be covered in three dimensions by folding tow-paths over each other in lawn-mower fashion. This technology has already been proven in laboratory and ocean settings to detect IP-reactive titanium- and rare-earth (REE) minerals such as ilmenite and monazite. By extension, minerals that weather and accumulate/concentrate by a similar mechanism, including gold, platinum, and diamonds, may be rapidly detected and mapped indirectly- even when dispersed and covered with thick, inert sediment. IP is also highly reactive to metal structures such as pipelines and cables. Currently, the only means for mapping an oil-spill plume is to park a large ship in the ocean and drop a sampling string over the side, requiring hours of time per sampling point. The samples must then be chemically analyzed, adding additional time and expense. We believe that an extension of the marine IP technology could also apply to rapidly mapping both seafloor- blanket and disseminated hydrocarbon plumes in the open ocean, as hydrocarbon droplets in conductive seawater are topologically equivalent to a metal-plates-and-dielectric capacitor. Because the effective capacitance would be frequency-dependent on droplet size, the approach we advocate holds the potential to not only map, but also to characterize the evolution and degradation of such a plume over time. In areas where offshore oil field development has been practiced for extended periods, making IP measurements from a towed streamer may be useful for locating buried - nd exposed pipelines, as well as pipeline leaks. We believe this technique will be a more cost-effective method than drop-sampling to map and monitor hydrocarbon plumes in open ocean settings. A marine induced polarization system was used successfully to map a 15 km × 45 km swath of the ocean floor off eastern South Africa with 3-meter sampling along 200-meter-separated profiles. The survey detected titanium-bearing sands up to 15 meters below the seafloor. From preliminary laboratory work it is apparent that we can extend this technology to monitor significant environmental problems including anthropogenic and industrial waste washed into sensitive estuaries and sounds during storm-water runoff episodes, and also to map and characterize dispersed oil plumes in the seawater column in three dimensions, as well as movement and dispersal of both over time.

Conference Paper↗
USGS1988

Geophysical instrumentation near Parkfield

The geophysical instrumentation operated by the U.S Geological Survey and others near Parkfield is designed to monitor ongoing tectonic processes that generate earthquakes and to record the strong shaking that results from larger shocks and its effects. this discussion focuses on the former objectives; the latter is discussed in the next section "Ground Shaking and Engineering Studies on the Parkfield Section of the San Andreas Fault Zone." Because scientists expect the anticipated earthquake to resemble the historic Parkfield earthquakes, and in particular that in 1966, the data from the 1966 shock were used to site instruments for optimun benefit before, during, and after the next shock. the primary feature used for siting was the "1966 rupture zone," which is shown as the orange fault traces on the maps in this section. This zone defines the extent of surface tectonic cracks in 1966 and includes the source areas for fore shocks to the 1934 and 1966 earthquakes (north end of the zone) as well as for apparent precursory fault creep in 1966 (near center of the zone). Scientists believe that if precursors to the next shock are observed, they most likely will be near the 1966 rupture zone.

California↗
USGS2016

Geology, selected geophysics, and hydrogeology of the White River and parts of the Great Salt Lake Desert regional groundwater flow systems, Utah and Nevada

The east-central Great Basin near the Utah-Nevada border contains two great groundwater flow systems. The first, the White River regional groundwater flow system, consists of a string of hydraulically connected hydrographic basins in Nevada spanning about 270 miles from north to south. The northernmost basin is Long Valley and the southernmost basin is the Black Mountain area, a valley bordering the Colorado River. The general regional groundwater flow direction is north to south. The second flow system, the Great Salt Lake Desert regional groundwater flow system, consists of hydrographic basins that straddle the Utah-Nevada border, with a length of about 150 miles from north to south. The general regional groundwater flow direction is from south to north towards the Great Salt Lake Desert. For 15 years with support from the Southern Nevada Water Authority (SNWA), hydrologists, geologists, and geophysicists studied the basin connections and the groundwater resources in these and adjacent flow systems over an area of about 25,000 square miles. A major first part of the SNWA study was constructing a 3-dimensional digital hydrogeologic framework based on geologic maps and cross sections at 1:250,000 scale. This framework documents the presence of three major aquifers: (1) Paleozoic carbonate rocks, (2) Eocene to Miocene volcanic rocks, and (3) Miocene to Holocene basin-fill sediments, as well as confining units that constrain flow. We interpret that movement of most groundwater through and across basins is by fracture-dominated flow along faults/fractures, yet in most places flow is prevented or retarded across faults, so mapping structures gives a first approximation to conduits and barriers to flow. The most important structures by far are high-angle normal faults of the basin-range episode of east-west extensional deformation. This event began at about 20 Ma, although most deformation and the formation of the present topography took place between 10 Ma and present. This topography consists of north-trending basins (mostly grabens) that alternate with north- trending ranges (mostly horsts); erosion of the ranges filled the basins with clastic alluvial basin-fill deposits. Geophysics provides data on the third dimension (cross sections) of the hydrogeologic framework. Audiomagnetotelluric profiles and gravity inversion located faults and enabled us to estimate thicknesses of basin-fill deposits. To this framework, hydrologic studies addressed precipitation, surface water, and springs, as well as groundwater levels, volumes, geochemistry, water budgets, and monitoring. At nearly the same time as our study, the Utah Geological Survey (UGS) and U.S. Geological Survey (USGS) addressed the same issues in many of the same areas, and publication of the efforts by all three agencies reveals a surprising similarity of conclusions, with some critical exceptions, which therefore demonstrates the great value of many scientists independently studying the same complex scientific problem. The differences in conclusions include directions and volumes of some ground- water flow paths, such as one proposed by the USGS of unlikely groundwater flow from Steptoe Valley to southern Snake Valley, and another proposed by the UGS of unlikely significant groundwater recharge flow from the Snake Range to the Fish Springs complex.

Utah↗
USGS1995

Hydrostatigraphic characterization of coastal aquifer by geophysical log analysis, Cape Cod National Seashore, Massachusetts

The Cape Cod National Seashore comprises part of Provincetown, Massachusetts, which lies at the northern tip of Cape Cod. The hydrologic regime in this area consists of unconsolidated sand-and-gravel deposits that constitute a highly permeable aquifer within which is a freshwater lens floating on denser sea water. A network of wells was installed into this aquifer to monitor a leachate plume emanating from the Provincetown landfill. Wells were located along orthogonal transects perpendicular to and parallel to the general groundwater flow path from the landfill to the seashore approximately 1,000 m to the southeast. Temperature, epithermal neutron, natural gamma. and electronmagnetic induction logs were obtained in five wells to depths ranging from 23 to 37 m. These logs identify the primary contamination and show that its movement is controlled by and confined within a dominant hydrostratigraphic unit about 2 to 5 m thick that exhibits low porosity, large representative grain size, and high relative permeability. A relation is also found between the temperaturegradient logs and water quality, with the gradient traces serving as effective delineators of the contaminant plume in wells nearest the landfill. Contamination is not detectable in the well nearest the seashore and farthest from the landfill, and the induction log from this well clearly identifies the freshwater/seawater transition zone at a depth of about 18 m. The geophysical logs provide fundamental information concerning the spatial distribution of aquifer properties near the landfill and lend valuable insight into how these properties influence the migration of the leachate plume to the sea.

Log Analyst↗
USGS2011

Geophysical expression of elements of the Rio Grande rift in the northeast Tusas Mountains - Preliminary interpretations

New interpretations of the nature of the Rio Grande rift and pre-existing rocks in the northeast Tusas Mountains region are derived from new and existing gravity and aeromagnetic data. 12-15 mGal amplitude gravity lows are interpreted to mainly reflect large thicknesses of the upper Oligocene to upper Miocene, syn-rift Los Pinos Formation and possibly significant amounts of the Eocene El Rito Formation. The Broke Off Mountain sub basin, named after the location of its greatest inferred depth, is interpreted to be a ~40 km long and ~13 km wide structure elongated in a northwest trend at the western margin of the San Luis Basin. The sub basin is interpreted to contain a maximum combined thickness of 900-2300 m of the Los Pinos Formation and El Rito Formation, with the Los Pinos Formation constituting the majority of the section. Sub basin age is constrained to be older than 21.6 ± 1.4 Ma, the age of a Hinsdale Formation basalt flow that caps the Los Pinos Formation section at Broke Off Mountain. This age constraint and surface geology indicate a pre- and early-rift age. The structural fabric of the northeast Tusas Mountains region is dominated by northwest-trending normal faults, as indicated by geologic mapping and interpretation of aeromagnetic data. Preliminary analysis of the aeromagnetic data suggests that lineaments, possibly reflecting faulting, trend through volcanic rocks as young as Pliocene in age. If correct, these interpretations challenge commonly held beliefs regarding two stages in the structural style of rifting, where early (Oligocene-Miocene) rifting was characterized by broad, shallow basins bounded by northwest-trending faults and later (Miocene-Pliocene) rifting was characterized by deep, narrow basins bounded by north-trending faults. The Broke Off Mountain sub basin is a counter example of a pre- and early-rift, deep and narrow basin. We hypothesize that the Broke Off Mountain sub basin may represent a southward extension of the Monte Vista graben in Colorado, based on similarities in geophysical expression, stratigraphy, and its position at the western portion of the San Luis Basin

Colorado, New Mexico↗
USGS2014

Advantages of active love wave techniques in geophysical characterizations of seismographic station - Case studies in California and the central and eastern United States

Active-source Love waves, recorded by the multi-channel analysis of surface wave (MASLW) technique, were recently analyzed in two site characterization projects. Between 2010 and 2012, the 2009 American Recovery and Reinvestment Act (ARRA) funded GEOVision to conduct geophysical investigations at 191 seismographic stations in California and the Central Eastern U.S. (CEUS). The original project plan was to utilize active and passive Rayleigh wave-based techniques to obtain shear-wave velocity (VS) profiles to a minimum depth of 30 m and the time-averaged VS of the upper 30 meters (VS30). Early in this investigation it became clear that Rayleigh wave techniques, such as multi-channel analysis of surface waves (MASRW), were not suited for characterizing all sites. Shear-wave seismic refraction and MASLW techniques were therefore applied. In 2012, the Electric Power Research Institute funded characterization of 33 CEUS station sites. Based on experience from the ARRA investigation, both MASRW and MASLW data were acquired by GEOVision at 24 CEUS sites. At shallow rock sites, sites with steep velocity gradients, and, sites with a thin, low velocity, surficial soil layer overlying stiffer sediments, Love wave techniques generally were found to be easier to interpret, i.e., Love wave data typically yielded unambiguous fundamental mode dispersion curves and thus, reduce uncertainty in the resultant VS model. These types of velocity structure often excite dominant higher modes in Rayleigh wave data, but not in the Love wave data. It is possible to model Rayleigh wave data using multi- or effective-mode techniques; however, extraction of Rayleigh wave dispersion data was found to be difficult in many cases. These results imply that field procedures should include careful scrutiny of Rayleigh wave-based dispersion data in order to also collect Love wave data when warranted.

Conference Paper↗
USGS2016

Geologic and geophysical maps and volcanic history of the Kelton Pass SE and Monument Peak SW Quadrangles, Box Elder County, Utah

The Kelton Pass SE and Monument Peak SW 7.5' quadrangles are located in Box Elder County, northwestern Utah (figure 1; plate 1). The northern boundary of the map area is 8.5 miles (13.7 km) south of the Utah-Idaho border, and the southern boundary reaches the edge of mud flats at the north end of Great Salt Lake. Elevations range from 4218 feet (1286 m) along the mud flats to 5078 feet (1548 m) in the Wildcat Hills. Deep Creek forms a prominent drainage between the Wildcat Hills and Cedar Hill. The closest towns are the ranching communities of Snowville, Utah (10 miles [16 km] to the northeast) (figure 1), and Park Valley, Utah (10 miles [16 km] to the west). The Kelton Pass SE and Monument Peak SW 7.5' quadrangles are located entirely within southern Curlew Valley, which drains south into Great Salt Lake, and extends north of the area shown on figure 1 into Idaho. Curlew Valley is bounded on the west by the Raft River Mountains and on the east by the Hansel Mountains (figure 1). Sedimentary and volcanic bedrock exposures within the quadrangles form the Wildcat Hills, Cedar Hill, and informally named Middle Shield (figure 1). Exposed rocks and deposits are Permian to Holocene in age, and include the Permian quartz sandstone and orthoquartzite of the Oquirrh Formation (Pos), tuffaceous sedimentary rocks of the Miocene Salt Lake Formation (Ts), Pliocene basaltic lava flows (Tb) and dacite (Tdw), Pleistocene rhyolite (Qrw) and basalt (Qb), and Pleistocene and Holocene surficial deposits of alluvial, lacustrine, and eolian origin. Structurally, the map area is situated in the northeastern Basin and Range Province, and is inferred to lie within the hanging wall of the late Miocene detachment faults exposed in the Raft River Mountains to the northwest (e.g., Wells, 1992, 2009; figure 1). This mapping project was undertaken to produce a comprehensive, large-scale geologic map of the Wildcat Hills, as well as to improve understanding of the volcanic and tectonic evolution of southern Curlew Valley. The resultant publication includes a geologic map of the Kelton Pass SE and Monument Peak SW quadrangles (plate 1), two interpretive geologic cross sections (plate 2), new geophysical data and interpretations, and new geochronology data for volcanic units within and near the quadrangles.

Utah↗
USGS1999

Hydrogeologic structure of the Newark Basin, Pennsylvania, from borehole geophysical logs

The Brunswick and the underlying Lockatong Formations are comprised of littrifled Mesozoic sediments that constitute part of the Newark Basin in southeastern Pennsylvania (USA). These fractured rocks form an important regional aquifer that consists of gmdational sequences of shale, siltstone, and sandstone, with fluid transport occurring primarily in fractures. An extensive suite of geophysical logs was obtained in seven wells located at the borough of Iamsdale, PA in order to characterize the areal hydrogeologic system. Analyses of these data indicate that the aquifer can be separated into two distinct structural domains which may, in turn, reflect different mechanical responses to basin bxtension: (1) In the shallow zone above 125 m, the dominant fmcucre population consists of gertfly dipping bedding-plane partings that strike N46°E and dip to the NW at about 11°. Fluid flow is concentrated within the upper 80 m and transmissivities rapidly diminish in magnitude with depth. (2) The zone below 125 m marks the appearance of numerous steeply dipping fractures that are orthogonal to the bedding plane features, striking subparallel at N227°E but dipping sharply to the SE at 77°. This secondary set of fractures is associated with a reasonably thick (= 60 m) high-resistivity, low- transmissivity sandstoned siltstone unit that is abruptly terminated by a thin shale bed at a depth of 190 m. This lower contact effectively delineates the aquifer's vertical extent and the observed lack of hydraulic productivity with increasing depth may be associated with the gradational transition into the Lockatong Formation.

Pennsylvania↗
USGS2019

Geophysical Characterization of the heat source in the Northwest Geysers, California

The Geysers, in northern California, is the largest energy producing geothermal field in the world. Looking to expand capacity, the operator Calpine Corporation developed an anomalously hot (~400 °C at 2.5 km depth) part of the field in the northwest Geysers, including testing of an enhanced geothermal systems (EGS). Though the area is anomalously hot, geophysical methods have failed to adequately image any inferred magmatic heat source. Gravity measurements were collected and jointly modeled with existing magnetic data along a two-dimensional profile aligned with an existing geologic cross-section. The key feature of the potential field model is a low-density, low-susceptibility body below the EGS at 5 km depth. Magnetotelluric (MT) measurements were collected around the northwest Geysers and modeled in three-dimensions to characterize subsurface resistivity structure. The resistivity model images an extension of a Quaternary granitic pluton locally known as “the felsite” under the EGS project and a possible zone of partial melt (<10%) below 7 km in the northwestern part of the field.

California↗
USGS2021

Geologic and geophysical maps of the Newfoundland Mountains and part of the adjacent Wells 30' x 60' quadrangles, Box Elder County, Utah

The Newfoundland Mountains map area (Newfoundland Mountains and adjacent part of Wells 30' x 60' quadrangles) is located in Box Elder County, northwestern Utah. The map encompasses broad expanses of the Great Salt Lake Desert as well as several picturesque mountain ranges (figures 1, 2, and 3). The geology of the area was last mapped and summarized by Doelling (1980). Since that landmark study, much of the area has been mapped in greater detail and new paleontologic, geochronologic, and structural data provide for an updated view of the geology. In addition, new geophysical studies (Langenheim and others, 2013; Langenheim, 2016) provide key data for improved interpretation of subsurface geology. The geologic map (plate 1) was compiled from fifteen 7.5' quadrangles mapped at a scale of 1:24,000 (mostly in the western part of the area), one map covering the Newfoundland Mountains at a scale of 1:31,680 (Allmendinger and Jordan, 1989), unpublished geologic mapping at scales from 1:24,000 to 1:50,000 (most by Miller; Bovine Mountain by T.E. Jordan), and reconnaissance mapping and aerial photo interpretation in intervening areas by Miller. Some published maps were remapped or reinterpreted by the authors in light of more recent studies north of the map area. Geologic mapping conducted as part of several theses/dissertations and a few published papers also were used (plate 2, index to geologic mapping). Concealed faults under valley bottoms were interpreted from gravity and aeromagnetic data. Our approach for this map was to integrate across the main themes of the mapped geology by generalizing units, structures, and polygons. This has the aim of illustrating the principal tectonic and stratigraphic packages, as well as illustrating the patterns of surficial units and geomorphology. Cross sections (plate 2) were constructed to coincide with representative cross sections for several detailed geologic maps. This approach required large bends across valleys. Basin geometry shown in the cross sections was constrained by gravity data and a seismic line since few deep drill holes are available.

Utah↗
USGS1974

Detailed near-bottom geophysical profile across the continental slope off northern California

A geophysical profile was run across the continental slope off the California-Oregon border by use of a deeply submerged instrument package, approximately 50 m above the sea floor, containing a proton magnetometer and a 3.5-kHz transducer for shallow seismic penetration. Surface-towed seismic reflection equipment was operated concurrently. The deep-tow data show that the slope is relatively smooth; this agrees with interpretation of surface seismic profiles. Features smaller than 1 km in length can be resolved with the deep profiles but not with the surface profiles. The deep profiles show smallscale undulations less than 0.5 km long that are especially well formed on the steeper parts of the slope. These undulations may be caused by minor downslope movement of surface sediment or by depositional processes. The deep-tow and surface seismic profiles can be combined to give a more accurate structural picture of the continental slope than can be obtained with surface data alone.

California↗
USGS1974

Correlation between geophysical data and rock types in the Piedmont and coastal plain of northeast Virginia and related areas

Physical, chemical, and mineralogic characteristics of rock units in parts of the northeast Virginia Piedmont are reflected in the aeromagnelic, aeroradioactivity, and gravity data for this area. Magnetic anomalies show the areal distribution of rocks containing magnetite. Aeroradiometric anomalies in the Piedmont and Coastal Plain provinces are directly related to the K 2 O content of the formations. In the crystalline rocks of the Piedmont this is reflected in their muscovite and microcline content, whereas in the Coastal Plain province it is related to the glauconite content of the Aquia Formation. Locally, in the crystalline rocks of the Piedmont, uranium- and thorium-bearing mineral content is of greater importance than K 2 O-bearing mineral content in producing aeroradiometric anomalies. The region also is characterized by (1) a northern gravity high, (2) a southern gravity high presumed to be caused by mafic rocks, and (3) an intervening zone characterized by low gravity relief and underlain by schist and gneiss. Geologic and geophysical extrapolation southward toward the Arvonia area show that the Chopawamsic Formation and the volcanic rocks of the Evington group are coeval. Also, on the northwest side of these volcanic rocks is a belt of small rootless mafic and ultramafic rocks diapirically ceplaced in folded rocks of Early Cambrian (?) age.

Virginia↗
USGS2023

Geologic and geophysical maps of the Stockton 30’ × 60’ quadrangle, California

This pamphlet and accompanying geologic and geophysical maps are the products of cooperative efforts by the California Geological Survey (CGS) and United States Geological Survey (USGS) to compile a comprehensive, digital representation of the bedrock geology, Quaternary surficial deposits, and potential-field anomalies within the boundaries of the Stockton 30’ × 60’ quadrangle. The Stockton 30’ × 60’ quadrangle covers approximately 4,890 km 2 of Contra Costa, Alameda, San Joaquin, and Stanislaus Counties, California. From the rugged hillsides of the northern Diablo Range in the west to the San Joaquin Valley in the east, the map extends roughly 88 km across growing suburban communities of the eastern San Francisco Bay Area and Livermore Valley, grass-covered ranchlands along eastern slopes of the Diablo Range, and into the low farmlands of the San Joaquin Valley and Sacramento-San Joaquin River Delta (Figure 1). The elevation ranges from near sea level in the Delta to 1,173 meters on Mt. Diablo, the most prominent peak of the San Francisco Bay region.

California↗
USGS2024

Characterizing structure in southern Summer Lake valley, Oregon using ground- and sUAS-based potential field geophysics

Summer Lake is located in south-central Oregon at the extreme northwestern extent of the Basin and Range Province, bordered by the Cascade Volcanic Province to the west and the High Lava Plains to the north. The valley hosts numerous hot springs and a small geothermal powerplant at the southeastern end of the valley in the town of Paisley. This tectonically active region has undergone significant ENE-directed extension producing highly faulted terrain with fault blocks tilting on average 60° from the maximum extension direction. Local geology consists of young volcanics which have been extensively dissected by predominantly NNW-trending normal faults. These same structures likely extend through the basin but are concealed by young basin fill sediments and volcanics. As a result, potential field geophysical methods are ideally suited for characterizing subsurface geology and structures in this region which are important for understanding basin evolution and tectonics within the valley. New ground-based gravity and magnetic data, as well as sUAS- (small uncrewed aerial systems) based magnetic data reveal a prevalent NNW-trending fabric beneath the basin fill in southern Summer Lake valley that likely plays an important role in controlling the flow of subsurface hydrothermal fluids. Additionally, measurements were performed on outcrops, hand samples and paleomagnetic cores to constrain the physical properties (density, magnetic susceptibility and magnetic remanence) of local geology. Together, these data help resolve basin geometry and delineate concealed faults and contacts, informing our understanding of the structural framework and geothermal resource potential of southern Summer Lake valley.

Oregon↗
USGS2024

Revisiting geophysical interpretations of the Midcontinent Rift below Lake Superior— Insights from GLIMPCE seismic-reflection line C

The 1.1 Ga Midcontinent Rift System (MRS) has been investigated in the Lake Superior region for more than a century. The most influential geophysical data for modern paradigms has come from seismic-reflection profiles collected by the Great Lakes International Multidisciplinary Program on Crustal Evolution (GLIMPCE) in the late 1980s. We are revisiting seismic-reflection GLIMPCE line C by constructing a detailed velocity model for conversion of the seismic data measured in two-way travel time to a section plotted versus depth. Preliminary results from the velocity modeling, depth conversion, and ties to onshore geology have led to a significantly different view of Line C as primarily a sag basin rather than a half-graben. Narrow intervals of high-velocity material that emanate upwards along both sides of the sag basin are interpreted as mafic intrusions connected to the mantle. This new interpretation suggests that basin subsidence was the dominant process in the development of rift stage troughs rather than major half-graben structures.

Conference Paper↗