USGS ScienceSearch

SEARCH · USGS Science

Results for “Journal of Quaternary”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources

The compositionally zoned eruption of 1912 in the Valley of Ten Thousand Smokes, Katmai National Park, Alaska

On June 6–8, 1912, ∼ 15 km 3 of magma erupted from the Novarupta caldera at the head of the Valley of Ten Thousand Smokes (VTTS), producing ∼ 20 km 3 of air-fall tephra and 11–15 km 3 of ash-flow tuff within ∼ 60 hours. Three discrete periods of ash-fall at Kodiak correlate, respectively, with Plinian tephra layers designated A, CD, and FG by Curtis (1968) in the VTTS. The ash-flow sequence overlapped with but outlasted pumice fall A, terminating within 20 hours of the initial outbreak and prior to pumice fall C. Layers E and H consist mostly of vitric dust that settled during lulls, and Layer B is the feather edge of the ash flow. The fall units filled and obscured the caldera, but arcuate and radial fissures outline a 6-km 2 depression. The Novarupta lava dome and its ejecta ring were emplaced later within the depression. At Mt. Katmai, 10 km east of the 1912 vent, a 600-m-deep caldera of similar area also collapsed at about this time, probably owing to hydraulic connection with the venting magma system; but all known ejecta are thought to have erupted at Novarupta. Mingling of three distinctive magmas during the eruption produced an abundance of banded pumice, and mechanical mixing of chilled ejecta resulted in deposits with a wide range of bulk composition. Pumice in the initial fall unit (A) is 100% rhyolite, but fall units atop the ash flow are > 98% dacite; black andesitic scoria is common only in the ash flows and in near-vent air-fall tephra. Pumice counts show the first half of the ash-flow deposit to be 91–98% rhyolite, but progressive increases of dacite and andesite eventually reduced the rhyolitic component to < 2%. The later, rhyolite-poor flows were hotter, less mobile, and widely produced partially welded tuff and vapor-indurated sillar. The main ash flow was too deflated and sluggish 16 km from the vent to surmount a 25-m-high moraine in its path but was diverted around it and continued 5 km down-valley, engulfing and charring trees but not toppling all of them. Thin ash-flow veneers feather 30–40 m up the enclosing valley walls but only where a constriction in the central VTTS locally raised the flow level. In the upper VTTS, the “high sand mark” is not a veneer but a marginal bench formed in thick tuff by differential compaction. Flooding from adjacent glaciers led to phreatic explosions that ejected blocks of tuff more welded than any yet exposed. A cluster of phreatic craters dammed a lake atop the tuff, the breaching of which caused a flood that scoured the ash-flow surface in the central VTTS, transported 50-cm blocks of welded tuff > 20 km to the lowermost VTTS, and deposited 1–8 m of debris there. Rhyolitic ejecta contain only 1–2% phenocrysts but andesite and dacite have 30–45%. Quartz is present and augite absent only in the rhyolite, but all ejecta contain plagioclase, orthopyroxene, titanomagnetite, ilmenite, apatite, and pyrrhotite; rare olivine occurs in the andesite. The zoning ranges of phenocrysts in the rhyolitic and intermediate ejecta do not overlap. New chemical data show the bulk SiO 2 range to be: rhyolite 77 ± 0.6, dacite 66-64.5, and andesite 61.5–58.5%. The dacitic and andesitic ejecta contrast in color and density, and it is not certain whether they form a compositional continuum. Analyses reported by Fenner within the 66–76% SiO 2 range were of banded pumice and lava and of bulk tephra that mechanically fractionated and mixed during flight. Despite the gap of 10% SiO 2 , Fe-Ti-oxide temperatures show a continuous range from rhyolite (805–850°C) through dacite (855–955°C) to andesite (955–990°C). Thermal continuity and isotopic and trace-element data suggest that all were derived from a single magmatic system, whether or not they were physically contiguous before eruption. If the rhyolitic liquid separated from dacitic magma, extraction was so efficient that no dacitic phenocrysts were retained and no bulk compositions in the range 66–76% SiO 2 were created; if it were a partial melt of roof rocks atop an intermediate magma body, then such rocks had no O- or Sr-isotopic contrast with the andesite-dacite magma and clearly did not include the Jurassic arkosic or granitic basement. The presence of Holocene domes of pre-1912 glassy dacite adjacent to the 1912 vent suggest that the 7 km 3 (or more) of high-silica rhyolitic magma (a composition rare in the Aleutian arc) was generated in less than a few thousand years. The 1912 vent is semi-encircled by several andesitic stratocones and is as close to Mageik, Trident, and Griggs volcanoes as it is to Mt. Katmai. The erupted magma probably occupied only shallow levels of an extensive system of injection and storage under a cluster of several stratovolcanoes. Although Quaternary basalt is not known to have erupted here, the intrusion of basaltic magma probably sustains the greater-VTTS magmatic system.

Alaska

Eruptive history of South Sister, Oregon Cascades

South Sister is southernmost and highest of the Three Sisters, three geologically dissimilar stratovolcanoes that together form a spectacular 20km reach along the Cascade crest in Oregon. North Sister is a monotonously mafic edifice as old as middle Pleistocene, Middle Sister a basalt-andesite-dacite cone built between 48 and 14ka, and South Sister is a basalt-free edifice that alternated rhyolitic and intermediate modes from 50ka to 2ka (largely contemporaneous with Middle Sister). Detailed mapping, 330 chemical analyses, and 42 radioisotopic ages show that the oldest exposed South Sister lavas were initially rhyolitic ~50ka. By ~37ka, rhyolitic lava flows and domes (72-74% SiO 2 ) began alternating with radially emplaced dacite (63-68% SiO 2 ) and andesite (59-63% SiO 2 ) lava flows. Construction of a broad cone of silicic andesite-dacite (61-64% SiO 2 ) culminated ~30ka in a dominantly explosive sequence that began with crater-forming andesitic eruptions that left fragmental deposits at least 200m thick. This was followed at ~27ka by growth of a steeply dipping summit cone of agglutinate-dominated andesite (56-60.5% SiO 2 ) and formation of a summit crater ~800m wide. This crater was soon filled and overtopped by a thick dacite lava flow and then by >150m of dacitic pyroclastic ejecta. Small-volume dacite lavas (63-67% SiO 2 ) locally cap the pyroclastic pile. A final sheet of mafic agglutinate (54-56% SiO 2 ) - the most mafic product of South Sister - erupted from and drapes the small (300-m-wide) present-day summit crater, ending a summit-building sequence that lasted until ~22ka. A 20kyr-long-hiatus was broken by rhyolite eruptions that produced (1) the Rock Mesa coulee, tephra, and satellite domelets (73.5% SiO 2 ) and (2) the Devils Chain of ~20 domes and short coulees (72.3-72.8% SiO 2 ) from N-S vent alignments on South Sister's flanks. The compositional reversal from mafic summit agglutinate to recent rhyolites epitomizes the frequently changing compositional modes of the South Sister locus throughout its lifetime. South Sister is part of a reach of the Cascades unusually active in the last 50kyr, characterized by high vent density, N-S vent alignments, and numerous eruptive units of true rhyolite (≥ 72% SiO 2 ) that distinguishes it from much of the Quaternary Cascade arc; these are eruptive expressions of the complex confluence of arc and intraplate magmatic-tectonic regimes.

Journal of Volcanology and Geothermal Research

Dating Quaternary faults in the southwestern United States by using buried calcic paleosols

Calcareous soils are widespread on upper Pliocene to upper Pleistocene unconsolidated surflcial deposits in semiarid portions of the southwestern United States. Where these soils are related to faults, the soils may provide a means for quantitatively estimating timing and amounts of Quaternary faulting. Soil age estimates are based on the amount of pedogenic CaCO 3 (g/cm 2 -soil column) that has accumulated from soil processes, whereas rates of calcic-soil formation were calibrated by the K-Ar dating method, tephrochronology, vertebrate paleontology, and regional soil studies. The County Dump fault, west of Albuquerque, N. Mex. cuts a 500 000-yearold datum, the Llano de Albuquerque. The downdropped block of this fault contains a sequence of faulted younger deposits and intercalated calcic paleosols. Soil ages, and hence fault ages, can be calculated by measuring the total pedogenic calcium carbonate content in a section of buried paleosols and by using an independently established maximum soil formation rate of 0.35 g CaCO 3 • cm -2 • 10 -3 yr -1 for the Albuquerque area. This particular fault segment has had four discrete episodes of movement in the past 500 000 yr, the most recent of which occurred about 20000 yr B.P. Recurrence intervals on the segment are 90 000-190 000 yr, but the composite recurrence interval for all fault movements in this area may be less by several orders of magnitude. This technique of quantifying soil properties and calculating ages of relict soils can be used to estimate ages of Quaternary deposits and associated surfaces, to correlate such features over broad regions, and to analyze regional trends in calcic-soil formation.

New Mexico

Moderate rates of late Quaternary slip along the northwestern margin of the Basin and Range Province, Surprise Valley fault, northeastern California

The 86-km-long Surprise Valley normal fault forms part of the active northwestern margin of the Basin and Range province in northeastern California. We use trench mapping and radiocarbon, luminescence, and tephra dating to estimate displacements and timing of the past five surface-rupturing earthquakes on the central part of the fault near Cedarville. A Bayesian OxCal analysis of timing constraints indicates earthquake times of 18.2 &plusmn; 2.6, 10.9 &plusmn; 3.2, 8.5 &plusmn; 0.5, 5.8 &plusmn; 1.5, and 1.2 &plusmn; 0.1 ka. These data yield recurrence intervals of 7.3 &plusmn; 4.1, 2.5 &plusmn; 3.2, 2.7 &plusmn; 1.6, and 4.5 &plusmn; 1.5 ka and an elapsed time of 1.2 &plusmn; 0.1 ka since the latest surface-rupturing earthquake. Our best estimate of latest Quaternary vertical slip rate is 0.6 ?? 0.1 mm/a. This late Quaternary rate is remarkably similar to long-term (8-14 Ma) minimum vertical slip rates (>0.4-0.5 &plusmn; 0.3 mm/a) calculated from recently acquired seismic reflection and chronologic and structural data in Surprise Valley and the adjacent Warner Mountains. However, our slip rate yields estimates of extension that are lower than recent campaign GPS determinations by factors of 1.5-4 unless the fault has an unusually shallow (30&deg;-35&deg;) dip as suggested by recently acquired seismic reflection data. Coseismic displacements of 2-4.5 &plusmn; 1 m documented in the trench and probable rupture lengths of 53-65 km indicate a history of latest Quaternary earthquakes of M 6.8-7.3 on the central part of the. Surprise Valley fault.

California

Interplay of late Cenozoic siliciclastic supply and carbonate response on the southeast Florida platform

High-resolution seismic-reflection data collected along the length of the Caloosahatchee River in southwestern Florida have been correlated to nannofossil biostratigraphy and strontium-isotope chemostratigraphy at six continuously cored boreholes. These data are interpreted to show a major Late Miocene(?) to Early Pliocene fluvial-deltaic depositional system that prograded southward across the carbonate Florida Platform , interrupting nearly continuous carbonate deposition since early in the Cretaceous. Connection of the platform top to a continental source of siliciclastics and significant paleotopography combined to focus accumulation of an immense supply of siliciclastics on the southeastern part of the Florida Platform . The remarkably thick (> 100 m), sand-rich depositional system, which is characterized by clinoformal progradation, filled in deep accommodation, while antecedent paleotopography directed deltaic progradation southward within the middle of the present-day Florida Peninsula. The deltaic depositional system may have prograded about 200 km southward to the middle and upper Florida Keys, where Late Miocene to Pliocene siliciclastic form the foundation of the Quaternary carbonate shelf and shelf margin of the Florida Keys. These far-traveled siliciclastic deposits filled accommodation on the southeastern part of the Florida Platform so that paleobathymetry was sufficiently shallow to allow Quaternary recovery of carbonate sedimentation in the area of southern peninsular Florida and the Florida Keys.

Florida

Volcanism, isostatic residual gravity and regional tectonic setting of the Cascade volcanic province

A technique to locate automatically boundaries between crustal blocks of disparate densities was applied to upward continued isostatic residual gravity data. The boundary analysis delineates a narrow gravitational trough that extends the length of the Pliocene and Quaternary volcanic arc from Mount Baker in northern Washington to Lassen Peak in California. Gravitational highs interrupt the trough at two localities: a northwest trending high in southern Washington and a northeast trending high between Mount Shasta and Lassen Peak. The latter anomaly is one of a set of northeast trending anomalies that, within the Quaternary arc, appear related to volcanic segmentation proposed previously on the basis of spatial and compositional distributions of volcanoes. These northeast trending anomalies extend hundreds of kilometers northeast of the arc, are caused by sources in the upper crust, and in some cases are related to exposed pre-Tertiary rocks. Segmentation models invoke geometric characteristics of the subducting plate as the primary factor controlling location and chemistry of volcanism, and these northeast trending gravity sources also may be a product of disturbance of the upper crust by the subduction process. More likely, the gravity sources may reflect upper crustal structures older than the High Cascades, possibly relicts from earlier accretionary events or more recent crustal deformation, that have actively influenced the spatial location of more recent volcanism. Much of the Pliocene and Quaternary volcanism of the Cascade arc has concentrated on or near contacts between crustal blocks of disparate density. These contacts may promote the ascension of magma to the Earth's surface.

Journal of Geophysical Research Solid Earth

Seismicity and geometry of a 110‐km‐long blind thrust fault 1. The 1985 Kettleman Hills, California, earthquake

The August 4, 1985, Kettleman Hills earthquake was the third in a sequence of moderate shocks to occur beneath the northern half of a 110‐km‐long fold chain bounding the eastern California Coast Ranges. The 1982 M W =5.4 New Idria, 1983 M W =6.5 Coalinga, and 1985 M W =6.1 Kettleman Hills events define a southward progression of seismic activity beneath the fold. We use teleseismic waveforms, geodetic modeling, hypocenters relocated in a three‐dimensional velocity model, and subsurface structural data to investigate the Kettleman Hills earthquake. The main shock results from motion on a shallowly dipping thrust fault buried at ∼10 km depth. Aftershocks and coseismic fault slip extend 20 km along the fold axis, nearly the full extent of the Kettleman Hills North Dome anticline. Aftershocks occur primarily several kilometers in front of the fault tip and in the core of the anticline. The main shock and several foreshocks occurred at a 2‐km right step in the Quaternary fold axis, which also corresponds to the southern end of the 1983 Coalinga and northern end of the 1985 Kettleman Hills aftershock zones. From this we infer that the step in the fold is caused by an offset or tear in the underlying fault. The scalar seismic moment is 1.6 × 10 18 N m, consistent with the geodetic deformation, and the duration of rupture is 16 s, 3–4 times greater than for the average earthquake with this scalar moment. The slow rate of moment release provides an explanation for the low level of ground shaking and low local magnitude reported for the event. The peak of the geodetic uplift is located 5 km perpendicular to the Quaternary fold axis. We argue that the fault is propagating northeast into the undeformed San Joaquin Valley sediments and that the overlying fold is growing at about 0.5 mm/yr.

California

The Wasatch fault zone, utah-segmentation and history of Holocene earthquakes

The Wasatch fault zone (WFZ) forms the eastern boundary of the Basin and Range province and is the longest continuous, active normal fault (343 km) in the United States. It underlies an urban corridor of 1.6 million people (80% of Utah's population) representing the largest earthquake risk in the interior of the western United States. We have used paleoseismological data to identify 10 discrete segments of the WFZ. Five are active, medial segments with Holocene slip rates of 1–2 mm a −1 , recurrence intervals of 2000–4000 years and average lengths of about 50 km. Five are less active, distal segments with mostly pre-Holocene surface ruptures, late Quaternary slip rates of <0.5 mm a −1 recurrence intervals of ≥10,000 years and average lengths of about 20 km. Surface-faulting events on each of the medial segments of the WFZ formed 2–4-m-high scarps repeatedly during the Holocene; latest Pleistocene (14–15 ka) deposits commonly have scarps as much as 15–20 m in height. Segments identified from paleoseismological studies of other major late Quaternary normal faults in the northern Basin and Range province are 20–25 km long, or about half of that proposed for the medial segments of the WFZ.

Journal of Structural Geology

High-performance liquid chromatography of quinoidal imminium compounds derived from triphenylmethanes

A series of eleven p -aminotriphenylmethane dyes have been studied by high-performance liquid chromatography (HPLC). The combined use of HPLC and spectrophotometry permits specific detection of these compounds in the visible range around 600 nm. As the high affinity of the imminium cations for the active sites of the hydrocarbonaceous stationary phase has presented difficulties for reversed-phase HPLC with pure solvents, organic electrolytes were added to the mobile phase to facilitate the elution of the components with improved selectivity, sensitivity (minimum detection limit, 0.1 &mu;g/ml), and peak symmetry. The effects of chromatographic variables on the component retentivity were investigated. Retention times of the dye analytes decreased with increasing concentration of the added ionic reagent and with decreasing number of the hydrophobic alkyl substituents on the nitrogen atom. The influence of pH on the retention parameters appears to parallel that observed previously for cationic quaternary ammonium compounds. Among the acidic reagents employed, naphthalenesulfonic acid yielded the most satisfactory results. The use of binary electrolyte systems invariably improved the chromatographic behavior of the imminium solutes analyzed. Results obtained with two different octadecylsilica columns have been compared.

Journal of Chromatography

Differential uplift and incision of the Yakima River terraces, central Washington State

The fault-related Yakima folds deform Miocene basalts and younger deposits of the Columbia Plateau in central Washington State. Geodesy implies ~2&thinsp;mm/yr of NNE directed shortening across the folds, but until now the distribution and rates of Quaternary deformation among individual structures has been unclear. South of Ellensburg, Washington, the Yakima River cuts a ~600&thinsp;m deep canyon across several Yakima folds, preserving gravel-mantled strath terraces that record progressive bedrock incision and related rock uplift. Here we integrate cosmogenic isochron burial dating of the strath terrace gravels with lidar analysis and field mapping to quantify rates of Quaternary differential incision and rock uplift across two folds transected by the Yakima River: Manastash and Umtanum Ridge. Isochron burial ages from in situ produced 26 Al and 10 Be at seven sites across the folds date episodes of strath terrace formation over the past ~2.9&thinsp;Ma. Average bedrock incision rates across the Manastash (~88&thinsp;m/Myr) and Umtanum Ridge (~46&thinsp;m/Myr) anticlines are roughly 4 to 8 times higher than rates in the intervening syncline (~14&thinsp;m/Myr) and outside the canyon (~10&thinsp;m/Myr). These contrasting rates demonstrate differential bedrock incision driven by ongoing Quaternary rock uplift across the folds at rates corresponding to ~0.13 and ~0.06&thinsp;mm/yr shortening across postulated master faults dipping 30&thinsp;&plusmn;&thinsp;10&deg;S beneath the Manastash and Umtanum Ridge anticlines, respectively. The reported Quaternary shortening across the anticlines accounts for ~10% of the ~2&thinsp;mm/yr geodetic budget, suggesting that other Yakima structures actively accommodate the remaining contemporary deformation.

Washington

The Sargent-Berrocal Fault Zone and its relation to the San Andreas Fault system in the southern San Francisco Bay region and Santa Clara Valley, California

The Sargent-Berrocal fault zone is a belt of thrust faults extending for about 58 mi (94 km) southeastward from the vicinity of Los Altos to San Juan Bautista, Calif. The fault zone generally dips southwestward toward the adjacent San Andreas fault at low to steep angles, and the southwest block has moved upward and northeastward. Thrusting across the fault zone has produced large-scale offset, which may increase to the southeast. If strike-slip movement has occurred, it has probably been minor. Offset Quaternary strata, physiographic features, and recent seismic activity all indicate that the Sargent-Berrocal fault zone has been active in the last one million years and that some clastic strain is currently being released along the northwest and southeast parts of the fault zone.

California

Excess nitrogen in selected thermal and mineral springs of the Cascade Range in northern California, Oregon, and Washington: Sedimentary or volcanic in origin?

Anomalous N 2 /Ar values occur in many thermal springs and mineral springs, some volcanic fumaroles, and at least one acid-sulfate spring of the Cascade Range. Our data show that N 2 /Ar values are as high as 300 in gas from some of the hot springs, as high as 1650 in gas from some of the mineral springs, and as high as 2400 in gas from the acid-sulfate spring on Mt. Shasta. In contrast, gas discharging from hot springs that contain nitrogen and argon solely of atmospheric origin typically exhibits N 2 /Ar values of 40–80, depending on the spring temperature. If the excess nitrogen in the thermal and mineral springs is of sedimentary origin then the geothermal potential of the area must be small, but if the nitrogen is of volcanic origin then the geothermal potential must be very large. End-member excess nitrogen (δ 15 N) is +5.3‰ for the thermal waters of the Oregon Cascades but is only about +1‰ for fumaroles on Mt. Hood and the acid-sulfate spring on Mt. Shasta. Dissolved nitrogen concentrations are highest for thermal springs associated with aquifers between 120 and 140°C. Chloride is the major anion in most of the nitrogen-rich springs of the Cascade Range, and N 2 /Ar values generally increase as chloride concentrations increase. Chloride and excess nitrogen in the thermal waters of the Oregon Cascades probably originate in an early Tertiary marine formation that has been buried by the late Tertiary and Quaternary lava flows of the High Cascades. The widespread distribution of excess nitrogen that has been generated in low to moderate-temperature sedimentary environments is further proof of the restricted geothermal potential of the Cascade Range.

Cascade Range

Statewide surficial geologic map of Nebraska underscores Quaternary landscape evolution from the High Plains to the Central Lowland

Surficial geologic mapping in Nebraska has been conducted primarily at the 1:24,000 scale since the mid-1990s, although there have also been limited efforts to map generalized Quaternary and surficial geology within the state and the region. We compiled and evaluated disparate maps (1:24,000–1:1,000,000) and datasets—including geologic, soil and soil parent material, and geomorphic maps as well as LiDAR derivatives—to produce a single 1:500,000 scale surficial geologic map of Nebraska that is the first of its kind. This new map provides a coarse-scale surficial geologic map that will be incorporated into a nationwide U.S. Geological Survey Quaternary geologic map. It also reflects the variation and uniqueness of physical landscapes in the state, where the Great Plains and Central Lowland physiographic provinces meet, further developing a richer interdisciplinary understanding of regional geomorphology in the heart of North America.

Nebraska

Snowmelt hydrograph interpretation: Revealing watershed scale hydrologic characteristics of the Yellowstone volcanic plateau

Snowmelt hydrograph analysis and groundwater age dates of cool water springs on the Yellowstone volcanic plateau provide evidence of high volumes of groundwater circulation in watersheds comprised of quaternary Yellowstone volcanics. Ratios of maximum to minimum mean daily discharge and average recession indices are calculated for watersheds within and surrounding the Yellowstone volcanic plateau. A model for snowmelt recession is used to separate groundwater discharge from overland runoff, and compare groundwater systems. Hydrograph signal interpretation is corroborated with chlorofluorocarbon (CFC) and tritium concentrations in cool water springs on the Yellowstone volcanic plateau. Hydrograph parameters show a spatial pattern correlated with watershed geology. Watersheds comprised dominantly of quaternary Yellowstone volcanics are characterized by slow streamflow recession, low maximum to minimum flow ratios. Cool springs sampled within the Park contain CFC's and tritium and have apparent CFC age dates that range from about 50 years to modern. Watersheds comprised of quaternary Yellowstone volcanics have a large volume of active groundwater circulation. A large, advecting groundwater field would be the dominant mechanism for mass and energy transport in the shallow crust of the Yellowstone volcanic plateau, and thus control the Yellowstone hydrothermal system. ?? 2009 Elsevier B.V.

Journal of Hydrology

Origin of Bermuda's clay-rich Quaternary paleosols and their paleoclimatic significance

Red clayey paleosols that are chiefly the product of aerosolic dust deposition are interbedded in the Quaternary carbonate formations of the Bermuda oceanic island system. These paleosols provide a basis for reconstructing Quaternary atmospheric circulation patterns in the northwestern Atlantic. Geochemical analyses were performed on representative paleosol samples to identify their parent dust source. Fine-grained fractions were analyzed by energy-dispersive X ray fluorescence to determine trace element (Zr, Y, La, Ti, and Nb) concentrations and to derive geochemical signatures based on immobile element ratios. These ratios were compared with geochemical signatures determined for three possible sources of airborne dust: (1) Great Plains loess, (2) Mississippi River Valley loess, and (3) Saharan dust. The Zr/Y and Zr/La ratios provided the clearest distinction between the hypothesized dust sources. The low ratios in the paleosol B horizons most closely resemble Saharan dust in the <2-μm size class fraction. Contributions from the two North American loessial source areas could not be clearly detected. Thus Bermuda paleosols have a predominantly Saharan aerosolic dust signature. Saharan dust deposition on Bermuda during successive Quaternary glacial periods is consistent with patterns of general circulation models, which indicate that during glacial maxima the northeast summer trade winds were stronger than at present and reached latitudes higher than 30°N despite lower-than-present sea surface temperatures in the North Atlantic.

Journal of Geophysical Research D: Atmospheres

The 1992 M=7 Cape Mendocino, California, earthquake: Coseismic deformation at the south end of the Cascadia megathrust

We invert geodetic measurements of coseismic surface displacements to determine a dislocation model for the April 25, 1992, M = 7 Cape Mendocino, California, earthquake. The orientation of the model slip vector, which nearly parallels North America-Juan de Fuca relative plate convergence, and the location and orientation of the model fault relative to the offshore Cascadia megathrust, suggest that the 1992 Cape Mendocino earthquake is the first well-recorded event to relieve strain associated with the Cascadia subduction zone. We use data from three geodetic techniques: (1) the horizontal and vertical displacements of 13 monuments surveyed with the Global Positioning System, corrected for observed horizontal interseismic strain accumulation, (2) 88 section-elevation differences between leveling monuments, and (3) the uplift of 12 coastal sites observed from the die-off of intertidal marine organisms. Maximum observed displacements are 0.4 m of horizontal movement and 1.5 m of uplift along the coast. We use Monte Carlo techniques to estimate an optimal uniform slip rectangular fault geometry and its uncertainties. The optimal model using all the data resolves 4.9 m of slip on a 14 by 15 km fault that dips 28° SE. The fault extends from 1.5 to 8.7 km in depth and the main-shock hypocenter is close to the downdip projection of the fault. The shallowly dipping fault plane is consistent with the observed aftershock locations, and the estimated geodetic moment is 3.1 × 10 19 N m, 70% of the seismic moment. Other models that exclude leveling data collected in 1935 and 1942 are more consistent with seismological estimates of the fault geometry. If the earthquake is characteristic for this segment, the estimated horizontal slip vector compared with plate convergence rates suggests a recurrence interval of 140 years, with a 95% confidence range of 100–670 years. The coseismic uplift occurred in a region that also has high Quaternary uplift rates determined from marine terrace studies. If repeated ruptures of this southernmost segment of the Cascadia megathrust are responsible for the Quaternary uplift, a comparison of the coseismic uplift with coastal uplift rates suggests a recurrence interval of 200–400 years. Thus comparing horizontal and vertical coseismic to long-term deformation suggests a recurrence interval of about 100–300 years for M = 7 events at the south end of the Cascadia megathrust.

Journal of Geophysical Research B: Solid Earth

Chert derived from magadiite in a lacustrine deposit near Rome, Malheur County, Oregon

Nodules and thin beds of chert occur in the upper part of the informally named Rome beds, about 8 11 km southwest of Rome, Oreg. The chert is in green to gray mudstone, about 8 m beneath a conspicuous gray and yellow zeolitic tuff. The bedded chert contains molds of saline minerals and it grades southward and marginward into nodular chert. The nodular chert is of two varieties: relatively large lobate nodules that have greenish-brown interiors and abundant saline crystal molds, and relatively small lobate nodules that have gray interiors and a surface reticulation. The latter variety is the so-called snakeskin agate prized by lapidaries. Both nodular varieties characteristically have a thin white rind. The cherts are similar, if not identical, to cherts reported from Quaternary lacustrine deposits in eastern Africa and from Pleistocene to Jurassic lacustrine deposits in Wyoming. The Rome chert probably formed from a hydrous sodium silicate precursor such as magadiite during diagenesis. Magadiite is generally a primary precipitate from a highly alkaline lake which is capable of attaining a high concentration of silica in solution.

Oregon

Palaeomagnetism and potassium-argon ages of volcanic rocks of Ngorongoro caldera, Tanzania

Natural remanent magnetization (NRM) has been measured in 21 lava flows and 1 tuff in the south-west wall of Ngorongoro caldera, Tanzania. The lowest three lavas are normally magnetized, the next two have intermediate directions, and the remainder are reversed; potassium-argon dating places the reversal at 2.45 My, corresponding to the Gauss Matuyama epoch boundary. Alternating-field demagnetization was effective in removing the ubiquitous lightning-produced secondary magnetizations, but partial thermal demagnetization was not. Curie temperatures of the lavas fell into two groups: 250°–350°C and 570°–585°C, probably corresponding to unoxidized and oxidized titanomagnetites respectively. NRM directions in the lavas occurred in several distinct and stratigraphically continuous groups, suggesting intermittent eruption of groups of lavas. No correspondence was found between NRM groups and other parameters, such as Curie temperatures. The dispersion of mean NRM directions is large in comparison with late Quaternary lavas from low latitudes in the Pacific basin, but probably is not large relative to the proportion of the geomagnetic field in Africa that is non-dipolar. The mean palaeomagnetic pole is offset 10.5° from the geographic pole, but because of the large dispersion, the difference is not considered significant.

Ngorongoro caldera