USGS ScienceSearch

SEARCH · USGS Science

Results for “Energy & Fuels”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 55 records · Page 3Linked to original sources

An unusual occurrence of arsenic-bearing pyrite in the Upper Freeport coal bed, West-Central Pennsylvania

Scanning electron microscopy and electron microprobe analysis were used to identify a rare type of As-bearing pyrite in selected specific gravity separates from the Pennsylvanian age Upper Freeport coal bed, west-central Pennsylvania. Arsenic was detected mainly in cell-wall replacement pyrite where concentrations ranged from nondetectable to 1.9 wt %. Although the majority of arsenic-bearing pyrite in the Upper Freeport coal bed is concentrated in massive and late diagenetic pyrite morphologies, the rarer As-bearing cell-replacement pyrite was observed in both light and heavy gravity separates from the three coal facies examined. Arsenic was occasionally detected in cell-filling replacement pyrite, but this As appears to be an artifact produced by signals from underlying and/or adjacent As-bearing cell-wall replacement pyrite. It is postulated that some plants of the Upper Freeport paleoswamp may have biomethylated As, which later could have been converted to dimethylarsine or other volatile organoarsenic compounds by either biologically or chemically driven processes. Once liberated, the arsenic may have been incorporated into pyrite during pyritization of the cell walls. The As incorporation occurred early, before significant compaction of the peat, because the pyritized cell walls are not compacted.

Pennsylvania

Molecular characterization and comparison of shale oils generated by different pyrolysis methods

Shale oils generated using different laboratory pyrolysis methods have been studied using standard oil characterization methods as well as Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) with electrospray ionization (ESI) and atmospheric photoionization (APPI) to assess differences in molecular composition. The pyrolysis oils were generated from samples of the Mahogany zone oil shale of the Eocene Green River Formation collected from outcrops in the Piceance Basin, Colorado, using three pyrolysis systems under conditions relevant to surface and in situ retorting approaches. Significant variations were observed in the shale oils, particularly the degree of conjugation of the constituent molecules and the distribution of nitrogen-containing compound classes. Comparison of FT-ICR MS results to other oil characteristics, such as specific gravity; saturate, aromatic, resin, asphaltene (SARA) distribution; and carbon number distribution determined by gas chromatography, indicated correspondence between higher average double bond equivalence (DBE) values and increasing asphaltene content. The results show that, based on the shale oil DBE distributions, highly conjugated species are enriched in samples produced under low pressure, high temperature conditions, and under high pressure, moderate temperature conditions in the presence of water. We also report, for the first time in any petroleum-like substance, the presence of N 4 class compounds based on FT-ICR MS data. Using double bond equivalence and carbon number distributions, structures for the N 4 class and other nitrogen-containing compounds are proposed.

Energy & Fuels

Comparing Laser Desorption Ionization and Atmospheric Pressure Photoionization Coupled to Fourier Transform Ion Cyclotron Resonance Mass Spectrometry To Characterize Shale Oils at the Molecular Level

Laser desorption ionization (LDI) coupled to Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) was used to analyze shale oils. Previous work showed that LDI is a sensitive ionization technique for assessing aromatic nitrogen compounds, and oils generated from Green River Formation oil shales are well-documented as being rich in nitrogen. The data presented here demonstrate that LDI is effective in ionizing high-double-bond-equivalent (DBE) compounds and, therefore, is a suitable method for characterizing compounds with condensed structures. Additionally, LDI generates radical cations and protonated ions concurrently, the distribution of which depends upon the molecular structures and elemental compositions, and the basicity of compounds is closely related to the generation of protonated ions. This study demonstrates that LDI FT-ICR MS is an effective ionization technique for use in the study of shale oils at the molecular level. To the best of our knowledge, this is the first time that LDI FT-ICR MS has been applied to shale oils.

Energy & Fuels

A USANS/SANS study of the accessibility of pores in the Barnett Shale to methane and water

Shale is an increasingly important source of natural gas in the United States. The gas is held in fine pores that need to be accessed by horizontal drilling and hydrofracturing techniques. Understanding the nature of the pores may provide clues to making gas extraction more efficient. We have investigated two Mississippian Barnett Shale samples, combining small-angle neutron scattering (SANS) and ultrasmall-angle neutron scattering (USANS) to determine the pore size distribution of the shale over the size range 10 nm to 10 μm. By adding deuterated methane (CD 4 ) and, separately, deuterated water (D 2 O) to the shale, we have identified the fraction of pores that are accessible to these compounds over this size range. The total pore size distribution is essentially identical for the two samples. At pore sizes >250 nm, >85% of the pores in both samples are accessible to both CD 4 and D 2 O. However, differences in accessibility to CD 4 are observed in the smaller pore sizes (~25 nm). In one sample, CD 4 penetrated the smallest pores as effectively as it did the larger ones. In the other sample, less than 70% of the smallest pores (<25 nm) were accessible to CD 4 , but they were still largely penetrable by water, suggesting that small-scale heterogeneities in methane accessibility occur in the shale samples even though the total porosity does not differ. An additional study investigating the dependence of scattered intensity with pressure of CD 4 allows for an accurate estimation of the pressure at which the scattered intensity is at a minimum. This study provides information about the composition of the material immediately surrounding the pores. Most of the accessible (open) pores in the 25 nm size range can be associated with either mineral matter or high reflectance organic material. However, a complementary scanning electron microscopy investigation shows that most of the pores in these shale samples are contained in the organic components. The neutron scattering results indicate that the pores are not equally proportioned in the different constituents within the shale. There is some indication from the SANS results that the composition of the pore-containing material varies with pore size; the pore size distribution associated with mineral matter is different from that associated with organic phases.

Texas

Qualitative and quantitative analysis of Dibenzofuran, Alkyldibenzofurans, and Benzo[b]naphthofurans in crude oils and source rock extracts

Dibenzofuran (DBF), its alkylated homologues, and benzo[b]naphthofurans (BNFs) are common oxygen-heterocyclic aromatic compounds in crude oils and source rock extracts. A series of positional isomers of alkyldibenzofuran and benzo[b]naphthofuran were identified in mass chromatograms by comparison with internal standards and standard retention indices. The response factors of dibenzofuran in relation to internal standards were obtained by gas chromatography-mass spectrometry analyses of a set of mixed solutions with different concentration ratios. Perdeuterated dibenzofuran and dibenzothiophene are optimal internal standards for quantitative analyses of furan compounds in crude oils and source rock extracts. The average concentration of the total DBFs in oils derived from siliciclastic lacustrine rock extracts from the Beibuwan Basin, South China Sea, was 518 &mu;g/g, which is about 5 times that observed in the oils from carbonate source rocks in the Tarim Basin, Northwest China. The BNFs occur ubiquitously in source rock extracts and related oils of various origins. The results of this work suggest that the relative abundance of benzo[b]naphthofuran isomers, that is, the benzo[b]naphtho[2,1-d]furan/{benzo[b]naphtho[2,1-d]furan + benzo[b]naphtho[1,2-d]furan} ratio, may be a potential molecular geochemical parameter to indicate oil migration pathways and distances.

Energy & Fuels

Using ground and intact coal Samples to evaluate hydrocarbon fate during supercritical CO 2 injection into coal beds: effects of particle size and coal moisture

To investigate the potential for mobilizing organic compounds from coal beds during geologic carbon dioxide (CO 2 ) storage (sequestration), a series of solvent extractions using dichloromethane (DCM) and using supercritical CO 2 (40 &deg;C and 10 MPa) were conducted on a set of coal samples collected from Louisiana and Ohio. The coal samples studied range in rank from lignite A to high volatile A bituminous, and were characterized using proximate, ultimate, organic petrography, and sorption isotherm analyses. Sorption isotherm analyses of gaseous CO 2 and methane show a general increase in gas storage capacity with coal rank, consistent with findings from previous studies. In the solvent extractions, both dry, ground coal samples and moist, intact core plug samples were used to evaluate effects of variations in particle size and moisture content. Samples were spiked with perdeuterated surrogate compounds prior to extraction, and extracts were analyzed via gas chromatography&ndash;mass spectrometry. The DCM extracts generally contained the highest concentrations of organic compounds, indicating the existence of additional hydrocarbons within the coal matrix that were not mobilized during supercritical CO 2 extractions. Concentrations of aliphatic and aromatic compounds measured in supercritical CO 2 extracts of core plug samples generally are lower than concentrations in corresponding extracts of dry, ground coal samples, due to differences in particle size and moisture content. Changes in the amount of extracted compounds and in surrogate recovery measured during consecutive supercritical CO 2 extractions of core plug samples appear to reflect the transition from a water-wet to a CO 2 -wet system. Changes in coal core plug mass during supercritical CO 2 extraction range from 3.4% to 14%, indicating that a substantial portion of coal moisture is retained in the low-rank coal samples. Moisture retention within core plug samples, especially in low-rank coals, appears to inhibit accessibility of supercritical CO 2 to coal matrix porosity, limiting the extent to which hydrocarbons are mobilized. Conversely, the enhanced recovery of some surrogates from core plugs relative to dry, ground coal samples might indicate that, once mobilized, supercritical CO 2 is capable of transporting these constituents through coal beds. These results underscore the need for using intact coal samples, and for better characterization of forms of water in coal, to understand fate and transport of organic compounds during supercritical CO 2 injection into coal beds.

Energy & Fuels

Multivariate analysis relating oil shale geochemical properties to NMR relaxometry

Low-field nuclear magnetic resonance (NMR) relaxometry has been used to provide insight into shale composition by separating relaxation responses from the various hydrogen-bearing phases present in shales in a noninvasive way. Previous low-field NMR work using solid-echo methods provided qualitative information on organic constituents associated with raw and pyrolyzed oil shale samples, but uncertainty in the interpretation of longitudinal-transverse ( T 1 &ndash; T 2 ) relaxometry correlation results indicated further study was required. Qualitative confirmation of peaks attributed to kerogen in oil shale was achieved by comparing T 1 &ndash; T 2 correlation measurements made on oil shale samples to measurements made on kerogen isolated from those shales. Quantitative relationships between T 1 &ndash; T 2 correlation data and organic geochemical properties of raw and pyrolyzed oil shales were determined using partial least-squares regression (PLSR). Relaxometry results were also compared to infrared spectra, and the results not only provided further confidence in the organic matter peak interpretations but also confirmed attribution of T 1 &ndash; T 2 peaks to clay hydroxyls. In addition, PLSR analysis was applied to correlate relaxometry data to trace element concentrations with good success. The results of this work show that NMR relaxometry measurements using the solid-echo approach produce T 1 &ndash; T 2 peak distributions that correlate well with geochemical properties of raw and pyrolyzed oil shales.

Energy & Fuels

Limitations, lack of standardization, and recommended best practices in studies of renewable energy effects on birds and bats

Increasing global energy demand is fostering the development of renewable energy as an alternative to fossil fuels. However, renewable energy facilities may adversely affect wildlife. Facility siting guidelines recommend or require project developers complete pre‐ and postconstruction wildlife surveys to predict risk and estimate effects of proposed projects. Despite this, there are no published studies that have quantified the types of surveys used or how survey types are standardized within and across facilities. We evaluated 628 peer‐reviewed publications, unpublished reports, and citations, and we analyzed data from 525 of these sources (203 facilities: 193 wind and 10 solar) in the United States and Canada to determine the frequency of pre‐ and postconstruction surveys and whether that frequency changed over time; frequency of studies explicitly designed to allow before‐after or impact‐control analyses; and what types of survey data were collected during pre‐ and postconstruction periods and how those data types were standardized across periods and among facilities. Within our data set, postconstruction monitoring for wildlife fatalities and habitat use was a standard practice ( n = 446 reports), but preconstruction estimation of baseline wildlife habitat use and mortality was less frequently reported ( n = 84). Only 22% ( n = 45) of the 203 facilities provided data from both pre‐ and postconstruction, and 29% ( n = 59) had experimental study designs. Of 108 facilities at which habitat‐use surveys were conducted, only 3% estimated of detection probability. Thus, the available data generally preclude comparison of biological data across construction periods and among facilities. Use of experimental study designs and following similar field protocols would improve the knowledge of how renewable energy affects wildlife.

Conservation Biology

Do summer temperatures trigger spring maturation in pacific lamprey, Entosphenus tridentatus?

Pacific lamprey, Entosphenus tridentatus, return to streams and use somatic energy to fuel maturation. Body size decreases, the lamprey mature, spawn, and then die. We predicted that warm, summer temperatures (>20 ??C) would accentuate shrinkage in body size, and expedite sexual maturation and subsequent death. We compared fish reared in the laboratory at diel fluctuating temperatures of 20-24 ??C (mean = 21.8 ??C) with fish reared at cooler temperatures (13.6 ??C). The results confirmed our predictions. Lamprey from the warm water group showed significantly greater proportional decreases in body weight following the summer temperature treatments than fish from the cool water group. A greater proportion of warm water fish sexually matured (100%) and died (97%) the following spring than cool water fish (53% sexually mature, 61% died). Females tended to mature and die earlier than males, most obviously in the warm water group. ?? 2009 John Wiley & Sons A/S.

Ecology of Freshwater Fish

The potential of wave energy conversion to mitigate coastal erosion from hurricanes

Wave energy conversion technologies have recently attracted more attention as part of global efforts to replace fossil fuels with renewable energy resources. While ocean waves can provide renewable energy, they can also be destructive to coastal areas that are often densely populated and vulnerable to coastal erosion. There have been a variety of efforts to mitigate the impacts of wave- and storm-induced erosion; however, they are either temporary solutions or approaches that are not able to adapt to a changing climate. This study explores a green and sustainable approach to mitigating coastal erosion from hurricanes through wave energy conversion. A barrier island, Dauphin Island, off the coast of Alabama, is used as a test case. The potential use of wave energy converter farms to mitigate erosion due to hurricane storm surges while simultaneously generating renewable energy is explored through simulations that are forced with storm data using the XBeach model. It is shown that wave farms can impact coastal morphodynamics and have the potential to reduce dune and beach erosion, predominantly in the western portion of the island. The capacity of wave farms to influence coastal morphodynamics varies with the storm intensity.

Alabama

Clean coal initiatives in Indiana

Purpose - Indiana is listed among the top ten coal states in the USA and annually mines about 35 million short tons (million tons) of coal from the vast reserves of the US Midwest Illinois Coal Basin. The implementation and commercialization of clean coal technologies is important to the economy of the state and has a significant role in the state's energy plan for increasing the use of the state's natural resources. Coal is a substantial Indiana energy resource and also has stable and relatively low costs, compared with the increasing costs of other major fuels. This indigenous energy source enables the promotion of energy independence. The purpose of this paper is to outline the significance of clean coal projects for achieving this objective. Design/methodology/approach - The paper outlines the clean coal initiatives being taken in Indiana and the research carried out at the Indiana Center for Coal Technology Research. Findings - Clean coal power generation and coal for transportation fuels (coal-to-liquids - CTL) are two major topics being investigated in Indiana. Coking coal, data compilation of the bituminous coal qualities within the Indiana coal beds, reducing dependence on coal imports, and provision of an emissions free environment are important topics to state legislators. Originality/value - Lessons learnt from these projects will be of value to other states and countries.

International Journal of Energy Sector Management

Physiomorphic transformation in extreme endurance migrants: Revisiting the case of bar-tailed godwits preparing for trans-pacific flights

In a 1998 paper entitled “Guts don’t fly: small digestive organs in obese bar-tailed godwits,” Piersma and Gill (1998) showed that the digestive organs were tiny and the fat loads huge in individuals suspected of embarking on a non-stop flight from Alaska to New Zealand. It was suggested that prior to migratory departure, these godwits would shrink the digestive organs used during fuel deposition and boost the size and capacity of exercise organs to optimize flight performance. Here we document the verity of the proposed physiomorphic changes by comparing organ sizes and body composition of bar-tailed godwits Limosa lapponica baueri collected in modesty midway during their fueling period (mid-September; fueling, n = 7) with the previously published data for godwits that had just departed on their trans-Pacific flight (October 19; flying, n = 9). Mean total body masses for the two groups were nearly identical, but nearly half of the body mass of fueling godwits consisted of water, while fat constituted over half of total body mass of flying godwits. The two groups also differed in their fat-free mass components. The heart and flight muscles were heavier in fueling godwits, but these body components constituted a relatively greater fraction of the fat-free mass in flying godwits. In contrast, organs related to digestion and homeostasis were heavier in fueling godwits, and most of these organ groups were also relatively larger in fueling godwits compared to flying godwits. These results reflect the functional importance of organ and muscle groups related to energy acquisition in fueling godwits and the consequences of flight-related exertion in flying godwits. The extreme physiomorphic changes apparently occurred over a short time window (≤1 month). We conclude that the inferences made on the basis of the 1998 paper were correct. The cues and stimuli which moderate these changes remain to be studied.

Frontiers in Ecology and Evolution

U.S. Geological Survey Science for the Wyoming Landscape Conservation Initiative: 2012 annual report

Southwest Wyoming contains abundant energy resources, wildlife, habitat, open spaces, and outdoor recreational opportunities. Although energy exploration and development have been taking place in the region since the late 1800s, the pace of development for fossil fuels and renewable energy increased significantly in the early 2000s. This and the associated urban and exurban development are leading to landscape-level environmental and socioeconomic changes that have the potential to diminish wildlife habitat and other natural resources, and the quality of human lives, in Southwest Wyoming. The potential for negative effects of these changes prompted Federal, State, and local agencies to undertake the Wyoming Landscape Conservation Initiative for Southwest Wyoming.

Wyoming

Estimating wildfire fuel consumption with multitemporal airborne laser scanning data and demonstrating linkage with MODIS-derived fire radiative energy

Characterizing pre- and post-fire fuels remains a key challenge for estimating biomass consumption and carbon emissions from wildfires. Airborne laser scanning (ALS) data have demonstrated effectiveness for estimating canopy, and to a lesser degree, surface fuel components at fine-scale (i.e., 30 m) across landscapes. Using pre- and post-fire ALS data and corresponding field data, this study estimated consumption of canopy fuel (ΔCF), understory fuel (ΔUF), total fuel (ΔTF), and canopy bulk density (ΔCBD) for the 2012 Pole Creek fire in Oregon, USA (10,760 ha), and portions of the 2011 Las Conchas fire in New Mexico, USA (4,934 ha). Additionally, the feasibility of predicting fuel consumption was tested using separate pre- and post-fire models (PrePost), models combining all pre- and post-fire data (Pooled), and models using all data from both fires (Global). Estimates of ΔTF were then compared to fire radiative energy (FRE, units: MJ) derived from Fire Radiative Power (FRP, units: MW) observations from the Moderate Resolution Imaging Spectroradiometer (MODIS) sensor onboard NASA Terra and Aqua satellites to mechanistically derive a biomass combustion coefficient (BCC, units: kg MJ −1 ). The PrePost and Pooled approaches yielded similar results at Las Conchas, but at Pole Creek insufficient pre-fire field data resulted in erroneous fuel consumption estimates outside the fire perimeter using the PrePost models. These results demonstrated that pre-fire field data were less important for these models than having field data which represent the full range of fuel conditions likely to exist across the landscape. Estimated total biomass consumed for the PrePost, Pooled, and Global models were 226 Gg, 224 Gg, and 224 Gg at Las Conchas, and 581 Gg, 713 Gg, and 552 Gg at Pole Creek. Comparisons between estimated ΔTF and FRE yielded an average BCC for both fires of 0.367 (s.d. ± 0.049) kg MJ −1 based on pixels with at least five MODIS observations. Both higher MODIS observations per pixel and accounting for canopy occlusion of FRE improved the relationship between ΔTF and MODIS-FRE. This study suggested a practical modelling approach for future efforts using only post-fire field observations and quantified a landscape-scale relationship between MODIS-derived FRE and fine-scale fuel consumption consistent with prior experiments.

New Mexico, Oregon

Mineral resources of Du Noir Addition, Washakie Wilderness area, Fremont County, Wyoming

The Du Noir Addition to the Washakie Wilderness area consists of 34,200 acres (13,840 hectares) of scenic mountainous terrain that adjoins the Teton Wilderness and Washakie Wilderness areas. The area was studied in 1973 by the U.S. Geological Survey and U.S. Bureau of Mines to evaluate its mineral, fuel, and geothermal energy potential. This evaluation is based on a search of the geologic literature, claim and production records, and fieldwork including mapping, inspection of claims and prospects, interpretation of aeromagnetic maps, and analyses of bedrock and stream-sediment samples. Flat-lying Eocene volcaniclastic rocks of the Absaroka volcanic field are exposed in about two-thirds of the Du Noir Addition. These volcanics unconformably overlie the deeply eroded, northwest-trending Du Noir anticline in which Paleozoic marine strata of Devonian through Permian age are exposed. Of lesser importance are small deposits of Eocene non-volcanic conglomerate, and basaltic intrusive and extrusive rocks of late Pliocene and possibly younger age. The results of this study indicate that the mineral, fuel, and geothermal potential of the Du Noir Addition are minimal. Low-grade copper-molybdenum mineralization occurs outside the addition, associated with intrusive rocks, but no indications of alteration or mineralization were found within the study area. Anomalous, but not economically important, concentrations of molybdenum and uranium were found in Permian and Eocene carbonaceous shales. Phosphate rock in the Phosphoria Formation occurs in beds too thin to constitute a resource. Large amounts of very pure limestone are present in the Madison Limestone, but equally pure limestone, much closer to transportation facilities, is found throughout this part of Wyoming. That part of the Du Noir anticline in the addition is too deeply eroded to be a likely reservoir of oil and gas. Present data indicates a low potential for geothermal energy in or near the addition.

Wyoming

Uranium, its impact on the national and global energy mix; and its history, distribution, production, nuclear fuel-cycle, future, and relation to the environment

The many aspects of uranium, a heavy radioactive metal used to generate electricity throughout the world, are briefly described in relatively simple terms intended for the lay reader. An adequate glossary of unfamiliar terms is given. Uranium is a new source of electrical energy developed since 1950, and how we harness energy from it is explained. It competes with the organic coal, oil, and gas fuels as shown graphically. Uranium resources and production for the world are tabulated and discussed by country and for various energy regions in the United States. Locations of major uranium deposits and power reactors in the United States are mapped. The nuclear fuel-cycle of uranium for a typical light-water reactor is illustrated at the front end-beginning with its natural geologic occurrence in rocks through discovery, mining, and milling; separation of the scarce isotope U-235, its enrichment, and manufacture into fuel rods for power reactors to generate electricity-and at the back end-the reprocessing and handling of the spent fuel. Environmental concerns with the entire fuel cycle are addressed. The future of the use of uranium in new, simplified, 'passively safe' reactors for the utility industry is examined. The present resource assessment of uranium in the United States is out of date, and a new assessment could aid the domestic uranium industry.

Circular

Enhanced microbial coalbed methane generation: A review of research, commercial activity, and remaining challenges

Coalbed methane (CBM) makes up a significant portion of the world’s natural gas resources. The discovery that approximately 20% of natural gas is microbial in origin has led to interest in microbially enhanced CBM (MECoM), which involves stimulating microorganisms to produce additional CBM from existing production wells. This paper reviews current laboratory and field research on understanding processes and reservoir conditions which are essential for microbial CBM generation, the progress of efforts to stimulate microbial methane generation in coal beds, and key remaining knowledge gaps. Research has been primarily focused on identifying microbial communities present in areas of CBM generation and attempting to determine their function, in-situ reservoir conditions that are most favorable for microbial CBM generation, and geochemical indicators of metabolic pathways of methanogenesis (i.e., acetoclastic or hydrogenotrophic methanogenesis). Meanwhile, researchers at universities, government agencies, and companies have focused on four primary MECoM strategies: 1) microbial stimulation (i.e., addition of nutrients to stimulate native microbes); 2) microbial augmentation (i.e., addition of microbes not native to or abundant in the reservoir of interest); 3) physically increasing microbial access to coal and distribution of amendments; and 4) chemically increasing the bioavailability of coal organics. Most companies interested in MECoM have pursued microbial stimulation: Luca Technologies, Inc., successfully completed a pilot scale field test of their stimulation strategy, while two others, Ciris Energy and Next Fuel, Inc., have undertaken smaller scale field tests. Several key knowledge gaps remain that need to be addressed before MECoM strategies can be implemented commercially. Little is known about the bacterial community responsible for coal biodegradation and how these microorganisms may be stimulated to enhance microbial methanogenesis. In addition, research is needed to understand what fraction of coal is available for biodegradation, and methods need to be developed to determine the extent of in-situ coal biodegradation by MECoM processes for monitoring changes to coal quality. Questions also remain about how well field-scale pilot tests will scale to commercial production, how often amendments will need to be added to maintain new methane generation, and how well MECoM strategies transfer between coal basins with different formation water geochemistries and coal ranks. Addressing these knowledge gaps will be key in determining the feasibility and commercial viability of MECoM technology.

International Journal of Coal Geology