USGS Science⌕ Search

SEARCH · USGS Science

Results for “Environmental Science & Technology”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26Linked to original sources
USGS2003

Arsenic speciation and reactivity in poultry litter

Recent U.S. government action to lower the maximum concentration levels (MCL) of total arsenic (As) (10 ppb) in drinking water has raised serious concerns about the agricultural use of As-containing biosolids such as poultry litter (PL). In this study, solid-state chemical speciation, desorbability, and total levels of As in PL and long-term amended soils were investigated using novel synchrotron-based probing techniques (microfocused (μ) synchrotron X-ray fluorescence (SXRF) and μ-X-ray absorption near-edge structure (XANES) spectroscopies) coupled with chemical digestion and batch experiments. The total As levels in the PL were as high as ≈50 mg kg - 1 , and As(II/III and V) was always concentrated in abundant needle-shaped microscopic particles (≈20 μm × 850 μm) associated with Ca, Cu, and Fe and to a lesser extent with S, Cl, and Zn. Post-edge XANES features of litter particles are dissimilar to those of the organo-As(V) compound in poultry feed (i.e., roxarsone), suggesting possible degradation/transformation of roxarsone in the litter and/or in poultry digestive tracts. The extent of As desorption from the litter increased with increasing time and pH from 4.5 to 7, but at most 15% of the total As was released after 5 d at pH 7, indicating the presence of insoluble phases and/or strongly retained soluble compounds. No significant As accumulation (<15 mg kg - 1 ) was found in long-term PL-amended agricultural surface soils. This suggests that As in the PL may have undergone surface and subsurface transport processes. Our research results raise concerns about long-term PL amendment effects on As contamination in surrounding soil−water environments.

Environmental Science & Technology↗
USGS2003

Methods for estimating adsorbed uranium(VI) and distribution coefficients of contaminated sediments

Assessing the quantity of U(VI) that participates in sorption/desorption processes in a contaminated aquifer is an important task when investigating U migration behavior. U-contaminated aquifer sediments were obtained from 16 different locations at a former U mill tailings site at Naturita, CO (U.S.A.) and were extracted with an artificial groundwater, a high pH sodium bicarbonate solution, hydroxylamine hydrochloride solution, and concentrated nitric acid. With an isotopic exchange method, both a KD value for the specific experimental conditions as well as the total exchangeable mass of U(VI) was determined. Except for one sample, KD values determined by isotopic exchange with U-contaminated sediments that were in equilibrium with atmospheric CO2 agreed within a factor of 2 with KD values predicted from a nonelectrostatic surface complexation model (NEM) developed from U(VI) adsorption experiments with uncontaminated sediments. The labile fraction of U(VI) and U extracted by the bicarbonate solution were highly correlated (r2 = 0.997), with a slope of 0.96 ?? 0.01. The proximity of the slope to one suggests that both methods likely access the same reservoir of U(VI) associated with the sediments. The results indicate that the bicarbonate extraction method is useful for estimating the mass of labile U(VI) in sediments that do not contain U(IV). In-situ KD values calculated from the measured labile U(VI) and the dissolved U(VI) in the Naturita alluvial aquifer agreed within a factor of 3 with in-situ K D values predicted with the NEM and groundwater chemistry at each well.

Environmental Science & Technology↗
USGS2003

Mercury Speciation by X-ray Absorption Fine Structure Spectroscopy and Sequential Chemical Extractions: A Comparison of Speciation Methods

Determining the chemical speciation of mercury in contaminated mining and industrial environments is essential for predicting its solubility, transport behavior, and potential bioavailability as well as for designing effective remediation strategies. In this study, two techniques for determining Hg speciation-X-ray absorption fine structure (XAFS) spectroscopy and sequential chemical extractions (SCE)-are independently applied to a set of samples with Hg concentrations ranging from 132 to 7539 mg/kg to determine if the two techniques provide comparable Hg speciation results. Generally, the proportions of insoluble HgS (cinnabar, metacinnabar) and HgSe identified by XAFS correlate well with the proportion of Hg removed in the aqua regia extraction demonstrated to remove HgS and HgSe. Statistically significant (> 10%) differences are observed however in samples containing more soluble Hg-containing phases (HgCl2, HgO, Hg3S2O 4). Such differences may be related to matrix, particle size, or crystallinity effects, which could affect the apparent solubility of Hg phases present. In more highly concentrated samples, microscopy techniques can help characterize the Hg-bearing species in complex multiphase natural samples.

Environmental Science & Technology↗
USGS2003

Post-Depositional Behavior of Cu in a Metal-Mining Polishing Pond (East Lake, Canada)

The post-depositional behavior of Cu in a gold-mining polishing pond (East Lake, Canada) was assessed after mine closure by examination of porewater chemistry and mineralogy. The near-surface (upper 1.5 cm) sediments are enriched in Cu, with values ranging from 0.4 to 2 wt %. Mineralogical examination revealed that the bulk of the Cu inventory is present as authigenic copper sulfides. Optical microscopy, energy-dispersion spectra, and X-ray data indicate that the main Cu sulfide is covellite (CuS). The formation of authigenic Cu-S phases is supported by the porewater data, which demonstrate that the sediments are serving as a sink for dissolved Cu below sub-bottom depths of 1-2 cm. The zone of Cu removal is consistent with the occurrence of detectable sulfide and the consumption of sulfate. The sediments can be viewed as a passive bioreactor that permanently removes Cu as insoluble copper sulfides. This process is not unlike that which occurs in other forms of bioremediation, such as wetlands and permeable reactive barriers. Above the zone of Cu removal, dissolved Cu maxima in the interfacial porewaters range from 150 to 450 ??g L-1 and reflect the dissolution of a Cu-bearing phase in the surface sediments. The reactive phase is thought to be a component of treatment sludges delivered to the lake as part of cyanide treatment. Flux calculations indicate that the efflux of dissolved Cu from the sediments to the water column (14-51 ??g cm-2 yr-1) can account for the elevated levels of dissolved Cu in lake waters (???50 ??g L-1). Implications for lake recovery are discussed.

Environmental Science & Technology↗
USGS2003

Fluorescence excitation-emission matrix regional integration to quantify spectra for dissolved organic matter

Excitation−emission matrix (EEM) fluorescence spectroscopy has been widely used to characterize dissolved organic matter (DOM) in water and soil. However, interpreting the >10,000 wavelength-dependent fluorescence intensity data points represented in EEMs has posed a significant challenge. Fluorescence regional integration, a quantitative technique that integrates the volume beneath an EEM, was developed to analyze EEMs. EEMs were delineated into five excitation−emission regions based on fluorescence of model compounds, DOM fractions, and marine waters or freshwaters. Volumetric integration under the EEM within each region, normalized to the projected excitation−emission area within that region and dissolved organic carbon concentration, resulted in a normalized region-specific EEM volume (Φ i ,n ). Solid-state carbon nuclear magnetic resonance ( 13 C NMR), Fourier transform infrared (FTIR) analysis, ultraviolet−visible absorption spectra, and EEMs were obtained for standard Suwannee River fulvic acid and 15 hydrophobic or hydrophilic acid, neutral, and base DOM fractions plus nonfractionated DOM from wastewater effluents and rivers in the southwestern United States. DOM fractions fluoresced in one or more EEM regions. The highest cumulative EEM volume (Φ T,n = ΣΦ i ,n ) was observed for hydrophobic neutral DOM fractions, followed by lower Φ T,n values for hydrophobic acid, base, and hydrophilic acid DOM fractions, respectively. An extracted wastewater biomass DOM sample contained aromatic protein- and humic-like material and was characteristic of bacterial-soluble microbial products. Aromatic carbon and the presence of specific aromatic compounds (as indicated by solid-state 13 C NMR and FTIR data) resulted in EEMs that aided in differentiating wastewater effluent DOM from drinking water DOM.

Environmental Science & Technology↗
USGS2003

Molecular-scale characterization of uranium sorption by bone apatite materials for a permeable reactive barrier demonstration

Uranium binding to bone charcoal and bone meal apatite materials was investigated using U L III -edge EXAFS spectroscopy and synchrotron source XRD measurements of laboratory batch preparations in the absence and presence of dissolved carbonate. Pelletized bone char apatite recovered from a permeable reactive barrier (PRB) at Fry Canyon, UT, was also studied. EXAFS analyses indicate that U(VI) sorption in the absence of dissolved carbonate occurred by surface complexation of U(VI) for sorbed concentrations ≤ 5500 μg U(VI)/g for all materials with the exception of crushed bone char pellets. Either a split or a disordered equatorial oxygen shell was observed, consistent with complexation of uranyl by the apatite surface. A second shell of atoms at a distance of 2.9 Å was required to fit the spectra of samples prepared in the presence of dissolved carbonate (4.8 mM total) and is interpreted as formation of ternary carbonate complexes with sorbed U(VI). A U−P distance at 3.5−3.6 Å was found for most samples under conditions where uranyl phosphate phases did not form, which is consistent with monodentate coordination of uranyl by phosphate groups in the apatite surface. At sorbed concentrations ≥ 5500 μg U(VI)/g in the absence of dissolved carbonate, formation of the uranyl phosphate solid phase, chernikovite, was observed. The presence of dissolved carbonate (4.8 mM total) suppressed the formation of chernikovite, which was not detected even with sorbed U(VI) up to 12 300 μg U(VI)/g in batch samples of bone meal, bone charcoal, and reagent-grade hydroxyapatite. EXAFS spectra of bone char samples recovered from the Fry Canyon PRB were comparable to laboratory samples in the presence of dissolved carbonate where U(VI) sorption occurred by surface complexation. Our findings demonstrate that uranium uptake by bone apatite will probably occur by surface complexation instead of precipitation of uranyl phosphate phases under the groundwater conditions found at many U-contaminated sites.

Environmental Science & Technology↗
USGS2004

Tire-wear particles as a source of zinc to the environment

Tire-tread material has a zinc (Zn) content of about 1 wt %. The quantity of tread material lost to road surfaces by abrasion has not been well characterized. Two approaches were used to assess the magnitude of this nonpoint source of Zn in the U.S. for the period 1936−1999. In the first approach, tread-wear rates from the automotive engineering literature were used in conjunction with vehicle distance-driven data from the U.S. Department of Transportation to determine Zn releases. A second approach calculated this source term from the volume of tread lost during lifetime tire wear. These analyses showed that the quantity of Zn released by tire wear in the mid-1990s was of the same magnitude as that released from waste incineration. For 1999, the quantity of Zn released by tire wear in the U.S. is estimated to be 10 000−11 000 metric tons. A specific case study focused on Zn sources and sinks in an urban−suburban watershed (Lake Anne) in the Washington, DC, metropolitan area for a time period of the late 1990s. The atmospheric flux of total Zn (wet deposition) to the watershed was 2 μg/cm 2 /yr. The flux of Zn to the watershed estimated from tire wear was 42 μg/cm 2 /yr. The measured accumulation rate of total Zn in age-dated sediment cores from Lake Anne was 27 μg/cm 2 /yr. These data suggest that tire-wear Zn inputs to urban−suburban watersheds can be significantly greater than atmospheric inputs, although the watershed appears to retain appreciable quantities of vehicular Zn inputs.

Environmental Science & Technology↗
USGS2004

Macroscopic and microscopic observations of particle-facilitated mercury transport from New Idria and Sulphur Bank mercury mine tailings

Mercury (Hg) release from inoperative Hg mines in the California Coast Range has been documented, but little is known about the release and transport mechanisms. In this study, tailings from Hg mines located in different geologic settings-New Idria (NI), a Si-carbonate Hg deposit, and Sulphur Bank (SB), a hot-spring Hg deposit-were characterized, and particle release from these wastes was studied in column experiments to (1) investigate the mechanisms of Hg release from NI and SB mine wastes, (2) determine the speciation of particle-bound Hg released from the mine wastes, and (3) determine the effect of calcinations on Hg release processes. The physical and chemical properties of tailings and the colloids released from them were determined using chemical analyses, selective chemical extractions, XRD, SEM, TEM, and X-ray absorption spectroscopy techniques. The total Hg concentration in tailings increased with decreasing particle size in NI and SB calcines (roasted ore), but reached a maximum at an intermediate particle size in the SB waste rock (unroasted ore). Hg in the tailings exists predominantly as low-solubility HgS (cinnabar and metacinnabar), with NI calcines having >50% HgS, SB calcines having >89% HgS, and SB waste rock having ???100% HgS. Leaching experiments with a high-ionic-strength solution (0.1 M NaCl) resulted in a rapid but brief release of soluble and particulate Hg. Lowering the ionic strength of the leach solution (0.005 M NaCl) resulted in the release of colloidal Hg from two of the three mine wastes studied (NI calcines and SB waste rock). Colloid-associated Hg accounts for as much as 95% of the Hg released during episodic particle release. Colloids generated from the NI calcines are produced by a breakup and release mechanism and consist of hematite, jarosite/alunite, and Al-Si gel with particle sizes of 10-200 nm. ATEM and XAFS analyses indicate that the majority (???78%) of the mercury is present in the form of HgS. SB calcines also produced HgS colloids. The colloids generated from the SB waste rock were heterogeneous and varied in composition according to the column influent composition. ATEM and XAFS results indicate that Hg is entirely in the HgS form. Data from this study identify colloidal HgS as the dominant transported form of Hg from these mine waste materials.

Environmental Science & Technology↗
USGS2004

Fate of volatile organic compounds in constructed wastewater treatment wetlands

The fate of volatile organic compounds was evaluated in a wastewater-dependent constructed wetland near Phoenix, AZ, using field measurements and solute transport modeling. Numerically based volatilization rates were determined using inverse modeling techniques and hydraulic parameters established by sodium bromide tracer experiments. Theoretical volatilization rates were calculated from the two-film method incorporating physicochemical properties and environmental conditions. Additional analyses were conducted using graphically determined volatilization rates based on field measurements. Transport (with first-order removal) simulations were performed using a range of volatilization rates and were evaluated with respect to field concentrations. The inverse and two-film reactive transport simulations demonstrated excellent agreement with measured concentrations for 1,4-dichlorobenzene, tetrachloroethene, dichloromethane, and trichloromethane and fair agreement for dibromochloromethane, bromodichloromethane, and toluene. Wetland removal efficiencies from inlet to outlet ranged from 63% to 87% for target compounds.

Environmental Science & Technology↗
USGS2003

Organochlorine compounds in Lake Superior: Chiral polychlorinated biphenyls and biotransformation in the aquatic food web

The enantiomeric composition of seven chiral PCB congeners was measured in the Lake Superior aquatic food web sampled in 1998, to determine the extent of enantioselective biotransformation in aquatic biota. All chiral PCB congeners studied (CBs 91, 95, 136, 149, 174, 176, and 183) biomagnified in the Lake Superior aquatic food web, based on biomagnification and food web magnification factors greater than unity. PCB atropisomers were racemic in phytoplankton and zooplankton, suggesting no biotransformation potential toward PCBs for these low trophic level organisms. However, Diporeia and mysids had significantly nonracemic residues for most chiral congeners studied. This observation suggests that these macrozooplankton can stereoselectively metabolize chiral congeners. Alternatively, macrozooplankton obtained nonracemic residues from feeding on organic-rich suspended particles and sediments, which would imply that stereoselective microbial PCB biotransformation may be occurring in Lake Superior sediments at PCB concentrations far lower than that previously associated with such activity. Widely nonracemic PCB residues in forage fish (lake herring, rainbow smelt, and slimy sculpin) and lake trout suggest a combination of both in vivo biotransformation and uptake of nonracemic residues from prey for these species. Minimum biotransformation rates, calculated from enantiomer mass balances between predators and prey, suggest metabolic half-lives on the order of 8 yr for CB 136 in lake trout and 2.6 yr for CB 95 in sculpins. This result suggests that significant biotransformation may occur for metaboliz able PCB congeners over the lifespan of these biota. This study highlights the potential of chiral analysis to study biotransformation processes in food webs.

Environmental Science & Technology↗
USGS2004

Use of 87 Sr/ 86 Sr and δ 11 B to Identify Slag-Affected Sediment in Southern Lake Michigan

Slag is a ubiquitous byproduct of the iron-smelting industry and influences geochemistry and water quality in adjacent geologic units, ground and surface water. Despite extensive slag deposition along the Indiana shoreline of Lake Michigan, definitive evidence that slag has affected lakebed sediments has not been established. Concerns for the protection of water and ecosystem resources in the Great Lakes motivated this study to determine if strontium and boron isotopes could be used to identify and delineate slag-affected bed sediment in Lake Michigan. Sixty-five samples of bed sediment were acquired from the southern lobe of Lake Michigan and analyzed for 87Sr/86Sr and ??11B. Samples immediately offshore from Indiana steel mills and slag-disposal sites contained higher median 87Sr/86Sr values (0.70881) than shoreline sediments collected elsewhere in the basin (0.70847) and uniquely decreased with increasing distance from the shoreline. The highest ??11B values occurred in sediments from the Indiana shoreline (+12.9 to 16.4???) but were also elevated in sediments collected offshore from three Lake Michigan cities (+11.7 to 12.7???). Contoured isotope data indicated that 82-154 km2 of bed sediment along the Indiana shoreline had elevated 87Sr/86Sr and ??11B values relative to shoreline sediments elsewhere in southern Lake Michigan.

Environmental Science & Technology↗
USGS2003

Effects of dissolved carbonate on arsenate adsorption and surface speciation at the hematite-water interface

Effects of dissolved carbonate on arsenate [As(V)] reactivity and surface speciation at the hematite−water interface were studied as a function of pH and two different partial pressures of carbon dioxide gas [ P CO 2 = 10 - 3.5 atm and ∼0; CO 2 -free argon (Ar)] using adsorption kinetics, pseudo-equilibrium adsorption/titration experiments, extended X-ray absorption fine structure spectroscopic (EXAFS) analyses, and surface complexation modeling. Different adsorbed carbonate concentrations, due to the two different atmospheric systems, resulted in an enhanced and/or suppressed extent of As(V) adsorption. As(V) adsorption kinetics [4 g L - 1 , [As(V)] 0 = 1.5 mM and I = 0.01 M NaCl] showed carbonate-enhanced As(V) uptake in the air-equilibrated systems at pH 4 and 6 and at pH 8 after 3 h of reaction. Suppressed As(V) adsorption was observed in the air-equilibrated system in the early stages of the reaction at pH 8. In the pseudo-equilibrium adsorption experiments [1 g L - 1 , [As(V)] 0 = 0.5 mM and I = 0.01 M NaCl], in which each pH value was held constant by a pH-stat apparatus, effects of dissolved carbonate on As(V) uptake were almost negligible at equilibrium, but titrant (0.1 M HCl) consumption was greater in the air-equilibrated systems ( P CO 2 = 10 - 3.5 atm) than in the CO 2 -free argon system at pH 4−7.75. The EXAFS analyses indicated that As(V) tetrahedral molecules were coordinated on iron octahedral via bidentate mononuclear (≈2.8 Å) and bidentate binuclear (≈3.3 Å) bonding at pH 4.5−8 and loading levels of 0.46−3.10 μM m - 2 . Using the results of the pseudo-equilibrium adsorption data and the XAS analyses, the pH-dependent As(V) adsorption under the P CO 2 = 10 - 3.5 atm and the CO 2 -free argon system was modeled using surface complexation modeling, and the results are consistent with the formation of nonprotonated bidentate surface species at the hematite surfaces. The results also suggest that the acid titrant consumption was strongly affected by changes to electrical double-layer potentials caused by the adsorption of carbonate in the air-equilibrated system. Overall results suggest that the effects of dissolved carbonate on As(V) adsorption were influenced by the reaction conditions [e.g., available surface sites, initial As(V) concentrations, and reaction times]. Quantifying the effects of adsorbed carbonate may be important in predicting As(V) transport processes in groundwater, where iron oxide-coated aquifer materials are exposed to seasonally fluctuating partial pressures of CO 2 (g).

Environmental Science & Technology↗
USGS2004

2,3,7,8-TCDD effects on visual structure and function in swim-up rainbow trout

An understanding of mechanisms of contaminant effects across levels of biological organization is essential in ecotoxicology if we are to generate predictive models for population-level effects. We applied a suite of biochemical, histological, and behavioral end points related to visual structure and function and foraging behavior to evaluate effects of 2,3,7,8-Tetrachlorodibenzo- p -dioxin (TCDD) on swim-up rainbow trout. We detected a dose-dependent decrease in densities of retinal ganglion cells (RGC), key retinal neurons that link the eye with the brain. These changes resulted in corresponding deficits in visual/motor function including reductions in visual acuity and in scotopic and photopic thresholds due to TCDD. The loss of RGCs suggests an increase in convergence of synapses from photoreceptors to RGCs as a cellular mechanism for the visual deficits. Dose-dependent increases in immunohistochemical detection of CYP1A protein in the vasculature of the brain and eye choroid was proportional with decreased ganglion cell densities in the retina. TCDD-induced AHR-regulated effects on these tissues might be involved in the detected decrease in ganglion cell densities. Prey capture rate decreased after TCDD exposure only at the highest treatment groups evaluated. Collectively, these results show that TCDD causes biochemical and structural changes in the eye and brain of rainbow trout that are associated with behavioral deficits leading to decreased individual fitness.

Environmental Science & Technology↗
USGS2004

Evaluation of current techniques for isolation of chars as natural adsorbents

Chars in soils or sediments may potentially influence the soil/sediment sorption behavior. Current techniques for the isolation of black carbon including chars rely often on acid demineralization, base extraction, and chemical oxidation to remove salts and minerals, humic acid, and refractory kerogen, respectively. Little is known about the potential effects of these chemical processes on the char surface and adsorptive properties. This study examined the effects of acid demineralization, base extraction, and acidic Cr2O72- oxidation on the surface areas, surface acidity, and benzene adsorption characteristics of laboratory-produced pinewood and wheat-residue chars, pure or mixed with soils, and a commercial activated carbon. Demineralization resulted in a small reduction in the char surface area, whereas base extraction showed no obvious effect. Neither demineralization nor base extraction caused an appreciable variation in benzene adsorption and presumably the char surface properties. By contrast, the Cr2O 72- oxidation caused a >31% reduction in char surface area. The Boehm titration, supplemented by FTIR spectra, indicated that the surface acidity of oxidized chars increased by a factor between 2.3 and 12 compared to nonoxidized chars. Benzene adsorption with the oxidized chars was lower than that with the non-oxidized chars by a factor of >8.9; both the decrease in char surface area and the increase in char surface acidity contributed to the reduction in char adsorptive power. Although the Cr 2O72- oxidation effectively removes resistant kerogen, it is not well suited for the isolation of chars as contaminant adsorbents because of its destructive nature. Alternative nondestructive techniques that preserve the char surface properties and effectively remove kerogen must be sought.

Environmental Science & Technology↗
USGS2004

Economic and health risk trade-offs of swim closures at a Lake Michigan beach

This paper presents a framework for analyzing the economic, health, and recreation implications of swim closures related to high fecal indicator bacteria (FIB) levels. The framework utilizes benefit transfer policy analysis to provide a practical procedure for estimating the effectiveness of recreational water quality policies. Evaluation criteria include the rates of intended and unintended management outcomes, whether the chosen protocols generate closures with positive net economic benefits to swimmers, and the number of predicted illnesses the policy is able to prevent. We demonstrate the framework through a case study of a Lake Michigan freshwater beach using existing water quality and visitor data from 1998 to 2001. We find that a typical closure causes a net economic loss among would-be swimmers totaling $1274-37 030/ day, depending on the value assumptions used. Unnecessary closures, caused by high indicator variability and a 24-h time delay between when samples are taken and the management decision can be made, occurred on 14 (12%) out of 118 monitored summer days. Days with high FIB levels when the swim area is open are also common but do relatively little economic harm in comparison. Also, even if the closure policy could be implemented daily and perfectly without error, only about 42% of predicted illnesses would be avoided. These conclusions were sensitive to the relative values and risk preferences that swimmers have for recreation access and avoiding health effects, suggesting a need for further study of the impacts of recreational water quality policies on individuals.

Environmental Science & Technology↗
USGS2004

Development and Application of Pyrolysis Gas Chromatography/Mass Spectrometry for the Analysis of Bound Trinitrotoluene Residues in Soil

TNT (trinitrotoluene) is a contaminant of global environmental significance, yet determining its environmental fate has posed longstanding challenges. To date, only differential extraction-based approaches have been able to determine the presence of covalently bound, reduced forms of TNT in field soils. Here, we employed thermal elution, pyrolysis, and gas chromatography/mass spectrometry (GC/MS) to distinguish between covalently bound and noncovalently bound reduced forms of TNT in soil. Model soil organic matter-based matrixes were used to develop an assay in which noncovalently bound (monomeric) aminodinitrotoluene (ADNT) and diaminonitrotoluene (DANT) were desorbed from the matrix and analyzed at a lower temperature than covalently bound forms of these same compounds. A thermal desorption technique, evolved gas analysis, was initially employed to differentiate between covalently bound and added 15N-labeled monomeric compounds. A refined thermal elution procedure, termed "double-shot analysis" (DSA), allowed a sample to be sequentially analyzed in two phases. In phase 1, all of an added 15N-labeled monomeric contaminant was eluted from the sample at relatively low temperature. In phase 2 during high-temperature pyrolysis, the remaining covalently bound contaminants were detected. DSA analysis of soil from the Louisiana Army Ammunition Plant (LAAP; ???5000 ppm TNT) revealed the presence of DANT, ADNT, and TNT. After scrutinizing the DSA data and comparing them to results from solvent-extracted and base/acid-hydrolyzed LAAP soil, we concluded that the TNT was a noncovalently bound "carryover" from phase 1. Thus, the pyrolysis-GC/MS technique successfully defined covalently bound pools of ADNT and DANT in the field soil sample.

Environmental Science & Technology↗
USGS2004

VOCs in shallow groundwater in new residential/commercial areas of the United States

The quality of shallow groundwater in urban areas was investigated by sampling 518 monitoring wells between 1996 and 2002 as part of the National Water-Quality Assessment Program of the U.S. Geological Survey. Well networks were installed primarily in new residential/commercial areas less than about 30 years old (17 studies) and in small towns (2 studies) by randomly locating as many as 30 monitoring wells in each study area. The median well depth was 10 m. Based on samples with age-date information, almost all groundwater was recharged after 1950. Samples were analyzed for 53 volatile organic compounds (VOCs). Concentrations ranged from about 0.001 to 1000 ??g/L (median 0.04), with less than 1% of the samples exceeding a Maximum Contamination Level or Drinking Water Advisory established by the U.S. Environmental Protection Agency. Using uncensored concentration data, at least one VOC was detected in 88% of the samples, and at least two VOCs were detected in 69% of the samples. Chloroform, toluene, and perchloroethene were the three most frequently detected VOCs. Dissolved oxygen concentration, estimated recharge index, and land-use were significant variables in logistic regression models that explained the presence of the commonly detected VOCs. Dissolved oxygen concentration was the most important explanatory variable in logistic regression models for 6 of the 14 most frequently detected VOCs. Bromodichloromethane, chloroform, and 1,1,1-trichloroethane had a positive correlation with dissolved oxygen; in contrast, dichloroethane, benzene, and toluene had a negative correlation with dissolved oxygen.

Environmental Science & Technology↗
USGS2004

Escherichia coli sampling reliability at a frequently closed Chicago beach: monitoring and management implications

Monitoring beaches for recreational water quality is becoming more common, but few sampling designs or policy approaches have evaluated the efficacy of monitoring programs. The authors intensively sampled water for E. coli ( N =1770) at 63rd Street Beach, Chicago for 6 months in 2000 in order to (1) characterize spatial-temporal trends, (2) determine between and within transect variation, and (3) estimate sample size requirements and determine sampling reliability. E. coli counts were highly variable within and between sampling sites but spatially and diurnally autocorrelated. Variation in counts decreased with water depth and time of day. Required number of samples was high for 70% precision around the critical closure level (i.e., 6 within or 24 between transect replicates). Since spatial replication may be cost prohibitive, composite sampling is an alternative once sources of error have been well defined. The results suggest that beach monitoring programs may be requiring too few samples to fulfill management objectives desired. As the recreational water quality national database is developed, it is important that sampling strategies are empirically derived from a thorough understanding of the sources of variation and the reliability of collected data. Greater monitoring efficacy will yield better policy decisions, risk assessments, programmatic goals, and future usefulness of the information.

Environmental Science & Technology↗