USGS Science⌕ Search
Home/Archive/USGS

USGS · 70026501

Macroscopic and microscopic observations of particle-facilitated mercury transport from New Idria and Sulphur Bank mercury mine tailings

G.V. Lowry·S. Shaw·C.S. Kim·J. J. Rytuba·Gordon E. Brown
View original source ↗Export metadata ↓

Abstract

Mercury (Hg) release from inoperative Hg mines in the California Coast Range has been documented, but little is known about the release and transport mechanisms. In this study, tailings from Hg mines located in different geologic settings-New Idria (NI), a Si-carbonate Hg deposit, and Sulphur Bank (SB), a hot-spring Hg deposit-were characterized, and particle release from these wastes was studied in column experiments to (1) investigate the mechanisms of Hg release from NI and SB mine wastes, (2) determine the speciation of particle-bound Hg released from the mine wastes, and (3) determine the effect of calcinations on Hg release processes. The physical and chemical properties of tailings and the colloids released from them were determined using chemical analyses, selective chemical extractions, XRD, SEM, TEM, and X-ray absorption spectroscopy techniques. The total Hg concentration in tailings increased with decreasing particle size in NI and SB calcines (roasted ore), but reached a maximum at an intermediate particle size in the SB waste rock (unroasted ore). Hg in the tailings exists predominantly as low-solubility HgS (cinnabar and metacinnabar), with NI calcines having >50% HgS, SB calcines having >89% HgS, and SB waste rock having ???100% HgS. Leaching experiments with a high-ionic-strength solution (0.1 M NaCl) resulted in a rapid but brief release of soluble and particulate Hg. Lowering the ionic strength of the leach solution (0.005 M NaCl) resulted in the release of colloidal Hg from two of the three mine wastes studied (NI calcines and SB waste rock). Colloid-associated Hg accounts for as much as 95% of the Hg released during episodic particle release. Colloids generated from the NI calcines are produced by a breakup and release mechanism and consist of hematite, jarosite/alunite, and Al-Si gel with particle sizes of 10-200 nm. ATEM and XAFS analyses indicate that the majority (???78%) of the mercury is present in the form of HgS. SB calcines also produced HgS colloids. The colloids generated from the SB waste rock were heterogeneous and varied in composition according to the column influent composition. ATEM and XAFS results indicate that Hg is entirely in the HgS form. Data from this study identify colloidal HgS as the dominant transported form of Hg from these mine waste materials.

Explore related subjects

Environmental Science & TechnologyArticle

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

G.V. Lowry, S. Shaw, C.S. Kim, J. J. Rytuba, Gordon E. Brown. 2004-08-31. Macroscopic and microscopic observations of particle-facilitated mercury transport from New Idria and Sulphur Bank mercury mine tailings. https://doi.org/10.1021/es034636c

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

USGS2026

Tracing mercury from land to river: Global sources, retention, and implications for sustainability

Mercury (Hg) pollution in river systems is a global sustainability challenge. Yet the transport, transformation, and retention of Hg within global rivers remain poorly quantified, particularly in regions with sparse observations such as Southeast Asia and Africa, hindering effective pollution mitigation and reinforcing geographic inequities in scientific knowledge and environmental governance. Here, we present the first global, high-resolution simulation of riverine Hg dynamics using a process-based model that traces Hg from land-based sources through river networks to the ocean. Under a realistic scenario, we estimate that ∼1900 megagrams per year (Mg/yr) of Hg enters global rivers, including 1500 Mg/yr from human-induced sources and 400 Mg/yr from soil erosion. Nearly half of this flux (∼1000 Mg/yr) is retained in reservoirs and dams, which act as major sinks. While such retention limits downstream delivery to the oceans, it also heightens in-reservoir Hg methylation risks. By bridging the gap between Hg releases and observed riverine exports, our framework offers a scalable tool for data-limited regions, promotes data access, and supports global freshwater and pollution-management strategies.

Environmental Science & Technology↗
USGS2026

Predictions of anthropogenic background PFAS concentrations in soil and relation to bedrock lithology and groundwater quality

Detectable concentrations of per- and polyfluoroalkyl substances (PFAS) have been observed in soils in remote areas and presumably originate from atmospheric deposition. These anthropogenic background concentrations may enable some PFAS to leach to groundwater at levels that exceed regulatory criteria for drinking water. However, anthropogenic background soil concentrations and their connection to groundwater are not well characterized. We developed a boosted regression tree model to predict perfluorooctanesulfonic acid (PFOS) and perfluorooctanoic acid (PFOA) concentrations in shallow soils across northern New England. Low soil pH was the most important predictor of elevated anthropogenic PFOS and PFOA concentrations in background soils, rather than potential PFAS sources, land use, or population density. Total organic carbon (TOC) was also an important predictor for PFOS soil concentrations. Model predictions indicate that 73% of the shallow soils within Maine, Vermont, and New Hampshire exceed New Hampshire’s Soil Remediation Standard for PFOS (0.5 ng/g) and 41% exceed the PFOA standard (0.4 ng/g). Analysis of soil model results and groundwater data suggests that areas with high soil pH are associated with higher groundwater detection frequencies, illustrating how areas with less retention in soil are, conversely, also areas with potentially greater groundwater vulnerability. Further analysis indicates that groundwater may be more vulnerable in calcareous lithologies.

Maine, New Hampshire, Vermont↗
USGS2026

PFAS mixture composition and internal exposure profiles shape biological responses under field-realistic exposure

Per- and polyfluoroalkyl substances (PFAS) occur as complex mixtures, yet mixture-dependent biological effects under environmentally realistic exposure conditions remain poorly understood. We conducted multiyear (2018, 2019, 2021) continuous-flow, field-based exposures of male fathead minnows ( Pimephales promelas ) using a low-PFAS reference well (REF; sum of measured PFAS (∑PFAS) 0.1–0.2 μg L –1 ) and PFAS-contaminated groundwater from a fire-training area (FTA) at Joint Base Cape Cod, Massachusetts. Dilution treatments enabled separation of concentration and mixture effects. Groundwater from well FTA1 was perfluorooctanesulfonate (PFOS) dominated (∑PFAS 10–31 μg L –1 ), whereas groundwater from well FTA2 had higher concentrations and was enriched in perfluorooctanoate (PFOA) and diverse precursors (∑PFAS ∼ 80 μg L –1 ). Despite comparable plasma ∑PFAS and PFOS in FTA1–100% and FTA2–50% on day-7, cumulative mortality reached approximately 35% in FTA2–50% and 17% in FTA2–100%, and secondary sex trait expression was reduced by approximately 65–80% relative to REF, whereas sperm motility effects were mixture- and time-dependent. Plasma PFAS profiles were dominated by perfluorohexanesulfonate (PFHxS), PFOS, and sulfonamide precursors. Liver transcriptomics from REF-acclimated fish revealed robust disruption of metabolic, mitochondrial, and endocrine pathways that link PFAS mixture chemistry and internal exposure profiles to organismal outcomes, and testis transcriptomics provided complementary insight into reproductive impairment. These results indicate that PFAS mixture composition and internal exposure profiles, including precursor-associated differences, are important determinants of ecotoxicological outcomes under field-realistic conditions.

Massachusetts↗