USGS Science⌕ Search

SEARCH · USGS Science

Results for “Completion Report”

Search indexed USGS publications on groundwater, aquifers, geologic maps, mineral resources and earthquakes. Explore source records by subject and place.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26Linked to original sources
USGS2024

Watershed hydrology assessment for the Lower Colorado River Basin. Appendix D: RiverWare analyses

RiverWare is a river system modeling tool developed by CADSWES (Center of Advanced Decision Support for Water and Environmental Systems) that allows the user to simulate complex reservoir operations and perform period-of-record analyses for different scenarios. For the InFRM hydrology studies, RiverWare is used to generate a homogeneous regulated POR by simulating the basin as if the reservoirs and their current rule sets had been present in the basin for the entire time period. Statistical analyses can then be performed on the extended records at the gages. This report summarizes the RiverWare portion of the hydrologic analysis being completed for the InFRM Hydrology study of the Colorado River Basin. The RiverWare model described in this chapter presents development of the Colorado River Basin hydrology, which mimics current operational conditions. The use of the RiverWare program allows for data extension to periods prior to dam construction. The utilization of longer gage record improves discharge frequency results and increases the confidence of the analysis being performed. The modeling evaluation criteria are: (1) evaluate output based on validating policies and functions, and (2) prioritize operation based on surcharge and flood control. A detailed explanation of the Colorado River Basin POR hydrology will be in a later section. Calibration results will also be shown that illustrate the overall model performance for the POR. The time window simulation run is for January 01, 1930 – September 30, 2019. This time window captures all big events occurred over the Colorado River basin. Each simulated water year was inspected individually to better validate the results. Historical pool elevations along with observed inflows and outflows were compared against the model simulated results.

Texas↗
USGS2008

Weight of Production of Emeralds, Rubies, Sapphires, and Tanzanite from 1995 Through 2005

U.S. Geological Survey (USGS) historically has not attempted to report comprehensive world production of gemstones on a country basis. This was because estimation of gemstone production is inherently difficult due to the fragmentary nature of the industry, the lack of governmental oversight or reporting in many countries where colored gemstones are mined, and the wide variation in quality between individual gemstones. Unlike diamonds, which, with the exception of the alluvial stones of West Africa, are mainly produced by large international mining companies and evaluated, cut, and marketed through a highly developed pricing structure and complex commercial arrangements, colored gemstones are mainly mined by individuals or small companies and have less developed evaluation and marketing arrangements. The trading centers for colored gems are smaller and less well known than the diamond centers. Colored gemstones, like alluvial diamonds, have the potential to be used to fund civil conflicts and other illegal activities, and because trade in colored gemstones is less organized than that of diamonds, they offer less opportunity for effective regulation of their trade. And, like diamond, until the recent advent of the Kimberley Process no generally accepted estimates of colored gemstone production globally or by producing country have existed. The present paper is a first attempt to develop production statistics for the three precious gems - emeralds , rubies , and sapphires - and tanzanite tanzanite, a semi-precious gem. The data consist of the weight of production of each of the gemstones from 1995 through 2005. Preliminary data on the weights of gemstone production were presented as a poster session at the Gemological Institute of America's Gemological Research Conference in San Diego, CA, in 2006, and as a published abstract (Yager, 2006) in an attempt to gather response to the estimates. The USGS continues to welcome information and suggestions that would improve the data presented here. Information used to make the production estimates presented in this paper include annual USGS Mineral Questionnaires completed by producing countries, data on exports from producing countries, reports from the literature, and company reports. Comparisons of the weight and the value of production of a type of gemstone between countries may differ considerably. Whereas east African countries dominate the weight production of rubies, Burma (Myanmar) is widely thought to have the highest value of ruby production. Data on the value of gemstone production are even more difficult to estimate than is the weight of production. Value of production is dependent upon both the quality and the sizes of the stones produced. Such data are not readily available and are difficult to estimate; therefore this report does not present tables of values of production. Instead, the report briefly discusses the forms in which gemstones are sold, the systems used to value the gemstones, and selected data that illustrate the variability of value of gemstones of a particular type.

Open-File Report↗
USGS1972

Movement and dispersion of soluble pollutants in the Northeast Cape Fear Estuary, North Carolina

This report presents the results of a fluorescent-dye-tracing study to determine the concentrations of a pollutant that would be present in the Northeast Cape Fear Estuary at various rates of continuous waste injection and freshwater inflow. Rhodamine WT dye was introduced into the estuary at a constant rate over a 24.8-hour period (two tidal cycles) at a point 6.4 miles upstream from the mouth in Wilmington, N.C., and concentrations were monitored at several selected sections in the tide-affected part of the river for 17 days. The range between high and low tide in this reach of the estuary averages at-rut 3.5 feet, and there is usually strong flow in both directions. Results of the dye study indicate that if a pollutant were injected at a rate of 100 pounds per day under the conditions of relatively low inflow existing' at the time, concentrations would ultimately build up to 20 micrograms of dye per liter of water 1,000 feet downstream. The flushing time during the study is estimated to be 17 days. These results are extrapolated to include periods of lower or higher inflow. For example, at average intervals of 10 years, it is estimated that inflow is so low that 100 days are required for a pollutant to travel the 6.4 miles from the point of waste release to the mouth of the river. Under these conditions it is expected that 1,000 feet downstream from the point of waste discharge, daily maximum concentrations will average about 130 micrograms per liter for each 100 pounds of pollutant injected per day. Results of a continuous discharge measurement of flow made by current meter during a complete tidal cycle are presented as a part of this report. Data from this measurement and other evidence indicate that net upstream flow in the estuary is possible over a period of several days.

North Carolina↗
USGS1999

Converting contour-line data into data sets for a multilayered aquifer using a geographic information system

Data sets that define the altitude of the base of basin-fill units in the west Salt River Valley were developed for the National Water-Quality Assessment program using a geographic information system. Data that define the land surface and the base of each basin-fill unit within a multilayered aquifer were compiled into a series of raster-data lattices. The lattice of each basin-fill layer was constructed using contour lines from a published hydrogeologic report. The land-surface lattice was constructed from a:250,000-scale digital elevation models of the area. The resulting raster-data set was queried to define the altitude of the base of each basin-fill unit at specified locations. Using a computer script to be run within a geographic information system, a table was produced that provided information that related the altitude of the bottom of the wells to the altitudes of the bases of the basin-fill units. A comparison of the altitude at the bottom of wells with the range in altitude between each basin-fill unit base made it possible to begin to determine the basin-fill unit in which wells were completed.

Open-File Report↗
USGS1976

Basic data from five core holes in the Raft River geothermal area, Cassia County, Idaho

Studies of the geothermal aspect-of the Bridge area of the Raft River basin in south-central Idaho (fig. 1) by the U.S. Geological Survey began in 1972 when Young and Mitchell (1973) made a geochemical and geologic reconnaissance of selected thermal waters in Idaho. The Bridge area had been designated the Frazier known geothermal resource area (Frazier KGRA) by the U.S. Geological Survey (Godwin and others-, 1971) . Since 1972, several units of the Geological Survey have studied the area to provide data for the U.S. Energy Research and Development Administration, which proposes to ascertain whether the geothermal resource can be developed for power generation and other uses. The studies include geologic mapping, geophysical surveys, water sampling, test drilling, and studies of all available drill- hole data. A list of reports already prepared on the area is included with this report. Core drilling of five holes began in August 1974 and was completed in March 1975. These holes are referred to as intermediate-depth core holes, principally because in the spring of 1974, 35 auger holes 25 to 98 feet (7.6 to 30 meters) were completed in the area (Crosthwaite, 1974), and the Aerojet Nuclear Company, under the auspices of the U.S. Energy Research and Development Administration, was planning some deep drilling 4,000 to 6,000 feet (1,200 to 1,800 meters) (fig. 1). The purpose of the core drilling was to provide information to test geophysical interpretations of the subsurface structure and lithology and to provide hydrologic and geologic data on the shallow part of the geothermal system. Samples of the core were made available to several divisions and branches of the Geological Survey and to people and agencies outside the Survey. This report presents the basic data from the core holes that had been collected to September 1, 1975, and includes lithologic and geophysical well logs, chemical analyses of water (table 1), and laboratory analyses of cores (table 2) that were completed as of the above date. The data were collected by the Idaho District office, Hydrologic Laboratory, Borehole Geophysics Research Project, and Drilling, Sampling, and Testing Section, all of the Water Resources Division, and the Branch of Central Environmental Geology of the Geologic Divison.

Idaho↗
USGS1986

Regional Aquifer-System Analysis Program of the U.S. Geological Survey: Summary of projects, 1978-84

The Regional Aquifer-System Analysis Program of the U.S. Geological Survey was initiated in 1978 as a result of specifications of the appropriations bill of the 95th Congress, prompted by the 1977 drought. The purpose of this program is to define the regional hydrology and geology and to establish a framework of background information of geology, hydrology, and geochemistry of the Nation's important aquifer systems. This information is critically needed to develop an understanding of ground-water flow systems, and to support better ground-water resources management. As of 1984, investigations of seven regional aquifer systems were completed, nine regional aquifer systems were still being studied, and three new studies were started. This report summarizes the status of each investigation of the regional aquifer systems under the program from 1978 through 1984. The nature of the summaries differs somewhat from study to study. For those studies which either have been completed or are near completion, summaries of results are presented. For projects that are not near completion or have just been started, discussions may be brief and focus on problem issues or hydrogeologic conditions All reports resulting from the study as of 1984 are listed at the end of each summary. A list of project chiefs and their offices is also included in the report for those who are interested in obtaining additional information.

Circular↗
USGS2022

Elevation-area-capacity relationships of Lake Powell in 2018 and estimated loss of storage capacity since 1963

Lake Powell is the second largest constructed water reservoir by storage capacity in the United States and represents a critical component in management of water resources in the Colorado River Basin. The reservoir provides hydroelectric power generation at Glen Canyon Dam, banks water storage for the Upper Colorado River Basin, stabilizes water commitments downstream, and buffers the Lower Colorado River Basin, including Lake Mead, against sedimentation and fluctuations in hydrological conditions. With completion of the dam in 1963, Lake Powell steadily filled with water before reaching full pool in 1980 and has become a popular destination for recreation, welcoming more than 4 million visitors per year. Since the early 2000s, severe drought and increases in water demand have resulted in a significant drop in reservoir elevation and stored water, prompting a heightened level of interest in the current state and future of Lake Powell. Beginning in 2017, the U.S. Geological Survey, in cooperation with the Bureau of Reclamation, completed topobathymetric surveys of Lake Powell for the first update of elevation-area-capacity relationships since 1986. This report presents results of these surveys and comparisons with estimates from previous surveys. The storage volume and surface area, as of completion of the topobathymetric survey in spring 2018, are calculated at 0.33-foot (0.10-meter) increments for elevations ranging from 3,120.08 to 3,717.19 feet above the North American Vertical Datum of 1988 (NAVD 88). Between 0.33-foot increments, the storage volumes and areas were linearly interpolated at 0.01-foot intervals. Interpolation error in the 0.01-foot interval estimates was assessed at lower (3,160.00–3,161.00 feet above NAVD 88), middle (3,400.00–3,401.00 feet above NAVD 88), and upper (3,700.00–3,711.00 feet above NAVD 88) elevations. The interpolated storage capacity and area estimates are comparable to the measured values with differences ranging from 0.00 to 0.02 percent and from −0.01 to 0.03 percent, respectively. Current storage capacity at full pool (3702.91 feet above NAVD 88) is 25,160,000 acre-feet. Compared to previously published estimates, this volume represents a 6.79 percent or 1,833,000-acre-foot decrease in storage capacity from 1963 to 2018 and a 4.00 percent or 1,049,000-acre-foot decrease from 1986 to 2018. Areal extent, as of spring 2018, at full pool is 159,200 acres, which represents a 1.33-percent decrease from 1963 to 2018 and a 0.96 percent decrease from 1986 to 2018.

Arizona, Utah↗
USGS2002

Semiquantitative spectrographic method for analysis of minerals, rocks, and ores

The quantity and complex nature of materials received for analysis in the spectrographic laboratories of the U. S. Geological Survey have emphasized the need for a spectrographic method to determine a maximum number of elements in a limited time with a reasonable degree of accuracy. The semiquantitative method described determines 68 elements in one arcing of a 10-mg. sample. The method has been used to complete 245,000 determinations during a 3-year period. Each determination is reported as a concentration range or bracket (0.001 to 0.01, 0.01 to 0.1%, etc.). A chemical check of 500 such determinations showed 92% in agreement; the remaining 8% agreed to within one bracket. The method requires a minimum of sample handling, thus reducing the chances of contamination, detects low concentrations of elements, and is rapid. Analyses have been completed on a wide variety of materials.

Analytical Chemistry↗
USGS1919

Gravel deposits of the Caddo Gap and De Queen quadrangles, Arkansas

Several thick deposits of gravel are widely distributed along the north edge of the Gulf Coastal Plain, of which a narrow belt is embraced in the southern parts of the Caddo Gap and De Queen quadrangles, Ark. This belt is shown on Plate I, and its location is shown on figure 5, a key map of this region. It comprises parts of Pike, Howard, and Sevier counties and a narrow strip of Hemp- stead County, in southwestern Arkansas, and a strip along the east edge of McCurtain County, in southeastern Oklahoma. The gravels are of Lower Cretaceous, Upper Cretaceous, and Quaternary age, and are composed mainly of pebbles of novaculite (a variety of chert) derived from the Arkansas novaculite exposed in the Ouachita Mountain region, which is north of the Gulf Coastal Plain. They are used in making concrete, in ballasting railroads, and in the construction of wagon roads. Very small quantities of pebbles are also used in the washing plant of the Kimberlite Diamond Mining & Washing Co., at Murfreesboro, to assist in the disintegration of the altered peridotite which carries the diamonds. Interest in possible American sources of flint pebbles or substitutes therefor to be used in tube mills, in which minerals, ores, cement materials, and clinker are extensively ground in this country, has been aroused since the beginning of the present world war. This interest is due to the partial interruption of imports of flint pebbles from Denmark and France, which have supplied most of the pebbles used in this country. The main reasons for the preparation of this report are to present a description of the gravels under discussion and to indicate the possibility of their use in tube mills. The information for this report is the result of detailed field studies in the Caddo Gap and De Queen quadrangles by the authors in 1908 and 1911 and by the senior author in 1912 and 1916. Mr. E, D. Mesler rendered valuable assistance in 1912. Much of the information is abstracted from the De Queen-Caddo Gap folio, which is nearing completion.

Arkansas, Oklahoma↗
USGS2002

Microbial mineralization of ethene under sulfate-reducing conditions

Previous investigations demonstrated that respiratoly reductive dechlorination of vinyl chloride (VC) can be efficient even at H 2 concentrations (≤2 n M ) that are characteristic of SO 4 -reducing conditions. In the study reported here, microorganisms indigenous to a lake-bed sediment completely mineralized [1,2- 14 C] ethene to 14 14CO 2 when incubated under SO 4 -reducing conditions. Together, these observations argue for a novel mechanism for the net anaerobic oxidation of VC to CO 2 : reductive dechlorination of VC to ethene followed by anaerobic oxidation of ethene to CO 2 . Moreover, the results of this study suggest that reliance on ethene and/or ethane accumulation as a quantitative indicator of complete reductive dechlorination of chioroethene contaminants may not be warranted.

Bioremediation Journal↗
USGS1978

Postulated model of uranium occurrence in the central mining area, Marysvale District, west-central Utah

Uranium in the central mining area of Marysvale, Utah occurs in hydrothermal veins cutting granitic and volcanic rocks in the eastern source area of the Mount Belknap Volcanics. A preliminary model for the origin of the veins envisages deposition in near-surface fractures above an unexposed pluton that may host a porphyry-type ore deposit. This model is based on the work in progress by the U.S. Geological Survey, and embodies all presently available data from field mapping, literature study, fluid inclusion studies, and diverse geochemical and isotopic studies. Recent advances in uranium geochemistry have been particularly helpful. The work is not yet complete so this model should be considered as a progress report suggesting possible targets for exploration and testing; such testing would in turn lead to refinements in the model and to a clearer understanding of vein-type uranium deposits in general.

Utah↗
USGS1983

Users guide for the Water Resources Division bibliographic retrieval and report generation system

The WRDBIB Retrieval and Report-generation system has been developed by applying Multitrieve (CSD 1980, Reston) software to bibliographic data files. The WRDBIB data base includes some 9 ,000 records containing bibliographic citations and descriptors of WRD reports released for publication during 1968-1982. The data base is resident in the Reston Multics computer and may be accessed by registered Multics users in the field. The WRDBIB Users Guide provides detailed procedures on how to run retrieval programs using WRDBIB library files, and how to prepare custom bibliographic reports and author indexes. Users may search the WRDBIB data base on the following variable fields as described in the Data Dictionary: Authors, organizational source, title, citation, publication year, descriptors, and the WRSIC (accession) number. The Users Guide provides ample examples of program runs illustrating various retrieval and report generation aspects. Appendices include Multics access and file manipulation procedures; a ' Glossary of Selected Terms'; and a complete ' Retrieval Session ' with step-by-step outlines. (USGS)

Open-File Report↗
USGS2023

The effects of management practices on grassland birds—Clay-colored Sparrow ( Spizella pallida )

Keys to Clay-colored Sparrow ( Spizella pallida ) management include providing grasslands with a shrub or forb component or shrub-dominated edge habitat, which includes dense grass and moderately high litter cover, and avoiding disturbances that completely eliminate woody vegetation. Clay-colored Sparrows have been reported to use habitats with 20–186 centimeters (cm) average vegetation height, 3–50 cm visual obstruction reading, 15–74 percent grass cover, 5–23 percent forb cover, less than 30 percent shrub cover, 1–20 percent bare ground, 10–63 percent litter cover, and less than or equal to 5 cm litter depth.

Professional Paper↗
USGS2004

Hydrogeologic characterization of the Modesto Area, San Joaquin Valley, California

Hydrogeologic characterization was done to develop an understanding of the hydrogeologic setting near Modesto by maximizing the use of existing data and building on previous work in the region. A substantial amount of new lithologic and hydrologic data are available that allow a more complete and updated characterization of the aquifer system. In this report, geologic units are described, a database of well characteristics and lithology is developed and used to update the regional stratigraphy, a water budget is estimated for water year 2000, a three-dimensional spatial correlation map of aquifer texture is created, and recommendations for future data collection are summarized. The general physiography of the study area is reflected in the soils. The oldest soils, which have low permeability, exist in terrace deposits, in the interfan areas between the Stanislaus, Tuolumne, and Merced Rivers, at the distal end of the fans, and along the San Joaquin River floodplain. The youngest soils have high permeability and generally have been forming on the recently deposited alluvium along the major stream channels. Geologic materials exposed or penetrated by wells in the Modesto area range from pre-Cretaceous rocks to recent alluvium; however, water-bearing materials are mostly Late Tertiary and Quaternary in age. A database containing information from more than 3,500 drillers'logs was constructed to organize information on well characteristics and subsurface lithology in the study area. The database was used in conjunction with a limited number of geophysical logs and county soil maps to define the stratigraphic framework of the study area. Sequences of red paleosols were identified in the database and used as stratigraphic boundaries. Associated with these paleosols are very coarse grained incised valley-fill deposits. Some geophysical well logs and other sparse well information suggest the presence of one of these incised valley-fill deposits along and adjacent to the Tuolumne River east of Modesto, a feature that may have important implications for ground-water flow and transport in the region. Although extensive work has been done by earlier investigators to define the structure of the Modesto area aquifer system, this report has resulted in some modification to the lateral extent of the Corcoran Clay and the regional dip of the Mehrten Formation. Well logs in the database indicating the presence of the Corcoran Clay were used to revise the eastern extent of the Corcoran Clay, which lies approximately parallel to the axis of valley. The Mehrten Formation is distinguished in the well-log database by its characteristic black sands consisting of predominantly andesitic fragments. Black sands in wells listed in the database indicate that the formation may lie as shallow as 120 meters (400 feet) below land surface under Modesto, approximately 90 meters (300 feet) shallower than previously thought. The alluvial aquifer system in the Modesto area comprises an unconfined to semiconfined aquifer above and east of the Corcoran Clay confining unit and a confined aquifer beneath the Corcoran Clay. The unconfined aquifer is composed of alluvial sediments of the Modesto, Riverbank, and upper Turlock Lake formations. The unconfined aquifer east of the Corcoran Clay becomes semiconfined with depth due to the numerous discontinuous clay lenses and extensive paleosols throughout the aquifer thickness. The confined aquifer is composed primarily of alluvial sediments of the Turlock Lake and upper Mehrten Formations, extending from beneath the Corcoran Clay to the base of fresh water. Ground water in the unconfined to semiconfined aquifer flows to the west and southwest. The primary source of present-day recharge is percolating excess irrigation water. The primary ground-water discharge is extensive ground-water pumping in the unconfined to semiconfined aquifer, imposing a significant component of vertical flow in the system. A water budget was calculated for water year 2000 using a land-use approach. During water year 2000, the total water supply in the Modesto area was more than 2.5 billion m3 (cubic meter) (2 million acre-ft [acre-foot]). Surface-water deliveries accounted for 60 percent of the total water supply, whereas ground-water pumpage accounted for 40 percent. Ninety-four percent of the water supply was used to meet irrigation demand and approximately 6 percent was used to meet urban demand. The total recharge in the model area was estimated at 1.4 billion m3 (1,100,000 acre-ft). The largest component of recharge is from excess irrigation water (58 percent); precipitation in excess of crop requirements accounted for 41 percent of the recharge. Geostatistical methods were used to develop a spatial correlation model of the percentage of coarse-grained texture in the Modesto area. The mean percentage coarse-grained texture calculated for each depth increment indicates a regional trend of decreasing coarse-grained texture with increasing depth, which is consistent with increasingly consolidated sediments with depth in the study area. The three-dimensional kriged estimates of percentage coarse-grained texture show significant heterogeneity in the texture of the sedimentary deposits. Assuming the hydraulic conductivity is correlated to the texture, the kriged result implies significant heterogeneity in the hydrogeologic framework.

California↗
USGS2023

Characterizing historic streamflow to support drought planning in the upper Missouri River basin

This project combined tree-ring based paleo and modern climate and hydrologic research aimed at understanding the primary influences on drought risk and water reliability in basins critical for western U.S. water resources. New paleohydrologic datasets and analyses were developed and applied to contextualize future streamflow projections and address specific water management questions. These questions centered around optimizing future water management protocols for numerous objectives ranging from improving agricultural water allocation during drought while maintaining instream flows for aquatic ecosystem health, to the testing of operations across large river systems with complex infrastructure critical for downstream flood control, navigation, and hydropower generation. USGS scientists worked closely with the Bureau of Reclamation to estimate both past and future drought risk at key management locations throughout the Missouri basin, the Milk and St. Mary River system, and across the major managed river systems in the western United States. These efforts provided a roadmap for future water management strategies under changing climate and water supply conditions, which are detailed in Reclamation’s newly completed Missouri Headwaters Basin Study, the 2021 SECURE Water Act Report, and the forthcoming update of the St. Mary and Milk Rivers Basin Study. Among the major scientific findings to emerge was a new understanding of the long-term (1200-year) history of drought variability for the Missouri River, which highlighted the unusual severity of the early 2000s drought across the Rocky Mountain headwaters and adjacent high plains. By combining the extended drought record with extensive modern and paleoclimate records, we document how warming exacerbates severities of naturally occurring droughts, with recent decades defined by “hot” droughts and the 2000s (2001-2010) drought ranking as the most severe event in 1200 years. Increasingly severe drought events such as this strain already over-allocated water resources that multiple sectors of society depend heavily upon.

upper Missouri River basin↗
USGS1985

An investigation of ground-water recharge by injection in the Palo Alto Baylands, California: Hydraulic and chemical interactions — Final report

The U.S. Geological Survey, in cooperation with the Santa Clara Valley Water District, has completed a study of ground-water recharge by injection in the Palo Alto baylands along San Francisco Bay, California. Selected wells within the Water District 's injection-extraction network were monitored to determine hydraulic and chemical interactions affecting well-field operation. The well field was installed to prevent and eliminate saline contamination in the local shallow aquifer system. The primary focus of this study is on factors that affect injection efficiency, specifically well and aquifer clogging. Mixing and break-through curves for major chemical constituents indicate ion exchange, adsorption, and dissolution reactions. Freshwater breakthrough was detected in water-level data, which reflected fluid-density change as well as head buildup. Dissolution of calcium carbonate caused by dilution of saline ground water probably accounts for an apparent increase in specific capacity possibly related to improved aquifer permeability. Adsorption evidently removed trace elements during passage of injected water through the aquifer. In terms of hydraulic and chemical compatibility, the well field is a viable system for ground-water recharge. Aquifer heterogeneity and operational constraints reduce the efficiency of the system. Efficiency may be maximized by careful attention to extraction distribution and quantity and to injection distribution, quantity, and water quality. (USGS)

California↗
USGS1996

Preliminary investigations of the distribution and resources of coal in the Kaiparowits Plateau, southern Utah

This report on the coal resources of the Kaiparowits Plateau, Utah is a contribution to the U.S. Geological Survey’s (USGS) “National Coal Resource Assessment” (NCRA), a five year effort to identify and characterize the coal beds and coal zones that could potentially provide the fuel for the Nation’s coal-derived energy during the first quarter of the twenty-first century. For purposes of the NCRA study, the Nation is divided into regions. Teams of geoscientists, knowledgeable about each region, are developing the data bases and assessing the coal within each region. The five major coal-producing regions of the United States under investigation are: (1) the Appalachian Basin; (2) the Illinois Basin; (3) the Gulf of Mexico Coastal Plain; (4) the Powder River Basin and the Northern Great Plains; and (5) the Rocky Mountains and the Colorado Plateau. Six areas containing coal deposits in the Rocky Mountain and Colorado Plateau Region have been designated as high priority because of their potential for development. This report on the coal resources of the Kaiparowits Plateau is the first of the six to be completed.

Utah↗
USGS2015

Exxon Valdez Oil Spill Restoration Project final report: Monitoring for evaluation of recovery and restoration of injured nearshore resources

In 2012, we completed three consecutive years of full field sampling in WPWS for EVOS Restoration Project 10100750. Nearshore monitoring was conducted in collaboration with the NPS SWAN I&M program and, beginning in 2012, as part of the EVOSTC GWA program. Data collection was done in accordance with standard operating procedures set forth to monitor marine water chemistry and quality, marine intertidal invertebrates, kelps and seagrasses, marine birds, black oystercatchers, and sea otters. Summer sampling in 2012 represented the fourth year of sampling in WPWS (an initial year of sampling was done in WPWS in 2007; EVOS Restoration Project 070750). Based on our monitoring of nearshore species in WPWS, and comparisons of data from WPWS and other areas within the Gulf of Alaska, we have no evidence of continued injury to biological resources at the spatial scales we are monitoring. A key finding is that recovery of the sea otter population is no longer constrained by exposure to lingering oil; this is consistent with related EVOSTC studies on harlequin ducks (Restoration Project 12120114-Q). We anticipate continued annual nearshore monitoring in WPWS and at KATM and KEFJ under GWA, with data summaries and analyses including all three areas to provide a larger spatial and temporal context to the understanding of processes and patterns in nearshore ecosystems of the GOA which were impacted by the EVOS of 1989.

Alaska↗