USGS Science⌕ Search

USGS · ofr20081013

Weight of Production of Emeralds, Rubies, Sapphires, and Tanzanite from 1995 Through 2005

Abstract

U.S. Geological Survey (USGS) historically has not attempted to report comprehensive world production of gemstones on a country basis. This was because estimation of gemstone production is inherently difficult due to the fragmentary nature of the industry, the lack of governmental oversight or reporting in many countries where colored gemstones are mined, and the wide variation in quality between individual gemstones. Unlike diamonds, which, with the exception of the alluvial stones of West Africa, are mainly produced by large international mining companies and evaluated, cut, and marketed through a highly developed pricing structure and complex commercial arrangements, colored gemstones are mainly mined by individuals or small companies and have less developed evaluation and marketing arrangements. The trading centers for colored gems are smaller and less well known than the diamond centers. Colored gemstones, like alluvial diamonds, have the potential to be used to fund civil conflicts and other illegal activities, and because trade in colored gemstones is less organized than that of diamonds, they offer less opportunity for effective regulation of their trade. And, like diamond, until the recent advent of the Kimberley Process no generally accepted estimates of colored gemstone production globally or by producing country have existed. The present paper is a first attempt to develop production statistics for the three precious gems - emeralds , rubies , and sapphires - and tanzanite tanzanite, a semi-precious gem. The data consist of the weight of production of each of the gemstones from 1995 through 2005. Preliminary data on the weights of gemstone production were presented as a poster session at the Gemological Institute of America's Gemological Research Conference in San Diego, CA, in 2006, and as a published abstract (Yager, 2006) in an attempt to gather response to the estimates. The USGS continues to welcome information and suggestions that would improve the data presented here. Information used to make the production estimates presented in this paper include annual USGS Mineral Questionnaires completed by producing countries, data on exports from producing countries, reports from the literature, and company reports. Comparisons of the weight and the value of production of a type of gemstone between countries may differ considerably. Whereas east African countries dominate the weight production of rubies, Burma (Myanmar) is widely thought to have the highest value of ruby production. Data on the value of gemstone production are even more difficult to estimate than is the weight of production. Value of production is dependent upon both the quality and the sizes of the stones produced. Such data are not readily available and are difficult to estimate; therefore this report does not present tables of values of production. Instead, the report briefly discusses the forms in which gemstones are sold, the systems used to value the gemstones, and selected data that illustrate the variability of value of gemstones of a particular type.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

Thomas R. Yager, W. David Menzie, Donald W. Olson. 2008. Weight of Production of Emeralds, Rubies, Sapphires, and Tanzanite from 1995 Through 2005. https://doi.org/10.3133/ofr20081013

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related USGS reports

ECCOE Landsat quarterly calibration and validation report—Quarter 2, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 2 (April–June), 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov.

Open-File Report↗

ECCOE Landsat quarterly calibration and validation report—Quarter 1, 2026

Executive Summary The U.S. Geological Survey Earth Resources Observation and Science Calibration and Validation (Cal/Val) Center of Excellence (ECCOE) focuses on improving the accuracy, precision, calibration, and product quality of remote-sensing data, leveraging years of multiscale optical system geometric and radiometric calibration and characterization experience. The ECCOE Landsat Cal/Val Team continually monitors the geometric and radiometric performance of active Landsat missions and makes calibration adjustments, as needed, to maintain data quality at the highest level. This report provides observed geometric and radiometric analysis results for Landsats 8 and 9 for quarter 1 (January–March) of 2026. All data used to compile the Cal/Val analysis results presented in this report are freely available from the U.S. Geological Survey EarthExplorer website: https://earthexplorer.usgs.gov . One specific activity that the ECCOE Landsat Cal/Val Team closely monitored was a Landsat 8 Thermal Infrared Sensor encoder alerts anomaly. On March 18, 2026, the Thermal Infrared Sensor instrument’s mechanism control electronics board reset, driving several parameters to default power-on values. Subsequent telemetry and analysis determined that no persistent hardware misconfiguration was present and no radiometric or geometric degradation was observed.

Open-File Report↗

Floods of June 20–July 6, 2024, in the Big Sioux River, Rock River, Little Sioux River, Ocheyedan River, and Floyd River Basins, northwestern Iowa

Major flooding occurred on June 20–July 6, 2024, in northwestern Iowa affecting the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd River Basins. Heavy rain fell in northwestern Iowa, southwestern Minnesota, and southeastern South Dakota on June 20–22, 2024. Parts of northwestern Iowa recorded 2–6 inches of rainfall and localized amounts exceeding 12 inches. A maximum peak-of-record streamflow of 175,000 cubic feet per second at the U.S. Geological Survey streamgage Big Sioux River at Akron, Iowa (06485500), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at four locations along the Big Sioux River between U.S. Interstate 29 at Sioux City, Iowa, upstream to Iowa Highway 10 north of Hawarden, Iowa, a distance of 75.7 river miles. A maximum peak-of-record streamflow of 157,000 cubic feet per second at the U.S. Geological Survey streamgage Rock River near Rock Valley, Iowa (06483500), was recorded on June 22, 2024, and had an annual exceedance probability of less than 0.2 percent. High-water marks were measured at eight locations along the Rock River between County Road B30 east of Hudson, South Dakota, upstream to Iowa Highway 9 at Rock Rapids, Iowa, a distance of 39.3 river miles. A maximum peak-of-record streamflow of 63,000 cubic feet per second at the U.S. Geological Survey streamgage Little Sioux River at Correctionville, Iowa (06606600), was recorded on June 24, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at 11 locations along the Little Sioux River between Iowa Highway 31 west of Correctionville, Iowa, upstream to U.S. Highway 18 north of Spencer, Iowa, a distance of 134.8 river miles. A maximum streamflow of 24,500 cubic feet per second at the U.S. Geological Survey streamgage Ocheyedan River near Spencer, Iowa (06605000), was recorded on June 22, 2024, and had an annual exceedance probability range of 0.2–0.49 percent. High-water marks were measured at three locations along the Ocheyedan River between County Road M38 west of Spencer, Iowa, upstream to U.S. Highway 18 west of Everly, Iowa, a distance of 12.8 river miles. A maximum streamflow of 41,000 cubic feet per second at the U.S. Geological Survey streamgage Floyd River at Alton, Iowa (06600100), was recorded on June 22, 2024, and had an annual exceedance probability range of 1–1.99 percent. High-water marks were measured at six locations along the Floyd River between Iowa Highway 3 at Le Mars, Iowa, upstream to Iowa Highway 10 at Alton, Iowa, a distance of 27.5 river miles. The high-water marks were used to develop flood profiles for the Big Sioux, Rock, Little Sioux, Ocheyedan, and Floyd Rivers.

Iowa, Minnesota, South Dakota↗